Motorcycle Performance Exhausts

The Atlas Pro is the upper tier of Red Rooster's Classic 650 range, above the standard Atlas. Stainless steel, mandrel-bent, packed with ceramic wool so it does not need repacking. The Classic 650 is a heavy, long-legged twin and the Pro is voiced for that: fuller low down, composed at cruising revs, without the hard edge that gets tiring on a long day. Polish, Black and Matte are identical in bore, bends and mounting, so the finish changes the look and nothing else. Light blueing near the joint is normal on stainless steel after heat cycles. Fitment guidance Red Rooster lists the Atlas Pro against the Royal Enfield Classic 650. If you are comparing it with the standard Atlas, or pairing it with other parts, message us and we will help you work it out. Specifications Brand: Red Rooster Performance Product line: Atlas Pro Material: Stainless steel Packing: Ceramic wool, no repacking required Finish options: Polish, Black, Matte Mounting: Direct bolt-on ECU remap required: Not mandatory Installation Bolt-on at the factory mounting points, no cutting or welding. A workshop fit is worth it for alignment and torque at the joint. In the box 1 x Red Rooster Atlas Pro exhaust in the finish you select Mounting hardware and dB killer

Read more less

The Red Rooster Header Pipe for the Goan Classic 350 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note low down. Paired with a Red Rooster silencer it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Royal Enfield Goan Classic 350. If you are pairing it with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the H'ness CB350 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note. Paired with a Red Rooster silencer such as the Pegasus it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Honda H'ness CB350. Honda's CB350 family shares an engine but not one header across every model. The CB350 RS and the newer CB350 and CB350 C are listed separately. If you are unsure which you have, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the CB350 RS is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note. Paired with a Red Rooster silencer such as the Pegasus RS it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Honda CB350 RS. Honda's CB350 family shares an engine but not one header across every model. The H'ness CB350 and the newer CB350 and CB350 C are listed separately. If you are unsure which you have, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the CB350 and CB350 C is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note. Paired with a Red Rooster silencer it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Honda CB350 and the Honda CB350 C. Honda's CB350 family shares an engine but not one header across every model. The H'ness CB350 and the CB350 RS are listed separately. If you are unsure which you have, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the earlier Classic 350 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and the low-down thump these engines are bought for. Paired with a Red Rooster silencer such as the Rumbler it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance This is the header for the earlier Royal Enfield Classic 350, the UCE generation before the 2021 J-platform redesign. The Classic 350 Reborn uses a different header, listed separately. If you are not sure which generation you have, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the Hunter 350 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note low down. Paired with a Red Rooster silencer it turns a slip-on into a full system. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Royal Enfield Hunter 350. If you are pairing it with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the Classic 350 Reborn is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note low down. Paired with a Red Rooster silencer such as the Rumbler Ace or Polestar Pro it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Royal Enfield Classic 350 Reborn, the J-platform model from 2021 onward. The earlier Classic 350 uses a different header. If you are not sure which generation you have, or you are pairing this with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the Super Meteor 650 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and on a parallel twin that is where most of the restriction sits. It is a mandrel-bent stainless steel header with a wider bore than the stock item. Less restriction ahead of the silencers lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note. Paired with a Red Rooster silencer such as the Astral Pro it completes the system rather than a slip-on. Finish is preference alone. Polish, Black and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Royal Enfield Super Meteor 650. The 650 twins share an engine but not this header. The Interceptor 650 and Continental GT 650 use the Stellar header instead. If you are unsure, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Vertex Header Pipe is the front half of the Vertex system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were designed to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which matters on a long-stroke single that spends its life in the mid range. Paired with the Vertex silencer it completes the system rather than a slip-on. Finish is preference alone. Polish and Matte share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against: Royal Enfield Himalayan 411 Royal Enfield Scram 411 The Scram 440 and the Himalayan 450 are different platforms and are not covered here. If you are unsure which you have, or you are pairing this with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product line: Vertex Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster Vertex header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Header Pipe for the Meteor 350 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note low down. Paired with a Red Rooster silencer such as the Polestar Pro it completes the system rather than a slip-on. Finish is preference alone. Polish and Black share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Royal Enfield Meteor 350. If you are pairing it with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Blaze Header Pipe is the second half of the Blaze system. Where the Blaze silencer changes how the exhaust exits, the header changes how it leaves the cylinder, and the two were designed to work as one. It is a mandrel-bent stainless steel single-piece header with a wider bore than the stock item. Less restriction at the front of the system means the engine breathes more freely under load, with a cleaner throttle pickup through the mid range and a fuller note. Fitted alongside the Blaze silencer it completes the full system rather than a slip-on. The finish is a matter of preference alone. Polish, Black and Matte are identical in bore, bends and mounting, so the choice changes the look and nothing else. Some blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the following Triumph 400 platform models: Triumph Speed 400 Triumph Speed T4 Triumph Scrambler 400 X If you are unsure which of these you have, or you are pairing the header with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product line: Blaze Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so no cutting or welding is involved. We still recommend a workshop fit, mainly to get the alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster Blaze header pipe in the finish you select Mounting hardware

Read more less

Minimal form. Maximum soul. The Silver Stallion BLAZE+ is a slip-on exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 2.5 kg. The perfect note for your Triumph 400. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion BLAZE+ Type Slip-On Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion BLAZE+ fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Robust exhaust design. The Silver Stallion STURDY+ is a slip-on exhaust for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. A signature slash-cut style for a muscular, aggressive tone. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion STURDY+ Type Slip-On Exhaust Fits Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE) Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (UCE), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion STURDY+ fit?It is made for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (UCE). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Classic meets custom. A thump amplifier. The Silver Stallion SPORTY+ is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. Crisp throttle and strong low-end power. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY+ Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY+ fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Lighter. Louder. Meaner. The Silver Stallion CROSS COUNTRY+ is a slip-on exhaust for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4 Nm over the stock system while weighing 3 kg. The Himalayan 450 just found its voice. What changes on the bike +2 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CROSS COUNTRY+ Type Slip-On Exhaust Fits Himalayan 450 and Guerrilla 450 Power gain +2 BHP over stock Torque gain +4 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CROSS COUNTRY+ fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 450. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion TWINS FULL SYSTEM is a full system exhaust for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 12 kg. Slip-ons plus competition headers, a signature growl and track-inspired tuning. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 12 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion TWINS FULL SYSTEM Type Full System Exhaust Fits Interceptor 650 and Continental GT 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 12 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion TWINS FULL SYSTEM fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?12 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Interceptor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Aerodynamic efficiency. The Silver Stallion RANGER is a slip-on exhaust for the BSA Gold Star 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 3.1 kg. A cylindrical design with a low drag coefficient and enhanced thermal durability. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 3.1 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion RANGER Type Slip-On Exhaust Fits Gold Star 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 3.1 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Gold Star 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion RANGER fit?It is made for the BSA Gold Star 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Gold Star 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your BSA is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Refined cruiser style. The Silver Stallion DRIFT+ is a slip-on exhaust for the Honda CB350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg with mid-pipe. Cruise with character. Roar with pride. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion DRIFT+ Type Slip-On Exhaust Fits CB350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the CB350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion DRIFT+ fit?It is made for the Honda CB350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the CB350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Honda is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Maximum flow. Minimal mercy. The Silver Stallion KAWASAKI FULL SYSTEM is a full system exhaust for the Kawasaki Z900 and Z1000. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 15% BHP and 9% torque over the stock system while weighing 11 kg. Unleash the full fury of your Kawasaki with a complete system upgrade. What changes on the bike 15% BHP and 9% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 11 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion KAWASAKI FULL SYSTEM Type Full System Exhaust Fits Z900 and Z1000 Power gain 15% BHP over stock Torque gain 9% torque over stock Weight 11 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Z900, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion KAWASAKI FULL SYSTEM fit?It is made for the Kawasaki Z900 and Z1000. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 15% BHP and 9% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?11 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Z900. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Kawasaki is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion BONNE FULL SYSTEM is a full system exhaust for the Triumph Bonneville T120. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 12 kg. A full system upgrade with a track-tuned growl. Lightweight and lethal. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 12 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion BONNE FULL SYSTEM Type Full System Exhaust Fits Bonneville T120 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 12 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Bonneville T120, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion BONNE FULL SYSTEM fit?It is made for the Triumph Bonneville T120. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?12 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bonneville T120. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Performance-driven style. The Silver Stallion KAWASAKI SLIP-ON is a slip-on exhaust for the Kawasaki Z900 and Z1000. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +3 BHP and +4.9 Nm over the stock system while weighing 4.5 kg. Uncage the beast. What changes on the bike +3 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 4.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion KAWASAKI SLIP-ON Type Slip-On Exhaust Fits Z900 and Z1000 Power gain +3 BHP over stock Torque gain +4.9 Nm over stock Weight 4.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Z900, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion KAWASAKI SLIP-ON fit?It is made for the Kawasaki Z900 and Z1000. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +3 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?4.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Z900. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Kawasaki is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Vintage soul, modern power. The Silver Stallion DRIFT is a slip-on exhaust for the Honda CB350 H'ness. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.8 BHP and +4 Nm over the stock system while weighing 2.2 kg with mid-pipe. A deeper echo of legacy, crafted to complement the timeless H'ness. What changes on the bike +1.8 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 2.2 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion DRIFT Type Slip-On Exhaust Fits CB350 H'ness Power gain +1.8 BHP over stock Torque gain +4 Nm over stock Weight 2.2 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the CB350 H'ness, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion DRIFT fit?It is made for the Honda CB350 H'ness. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.8 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.2 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the CB350 H'ness. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Honda is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less