ON SALE | Rawtorque

Front Master Cylinder Guard for TVS Apache RTX 300 – Brake System Protection The Mototorque Front Master Cylinder Guard for TVS Apache RTX 300 is engineered to provide protective coverage to the motorcycle’s front brake master cylinder assembly. Designed specifically for the TVS Apache RTX 300, this guard is fabricated from premium stainless steel, built to shield the front brake master cylinder from stones, debris, and accidental impacts encountered during daily riding or touring conditions. The brake master cylinder is a key component of the braking system that houses hydraulic mechanisms responsible for transferring rider input into braking power. Positioned high on the cockpit area, it remains exposed to external elements and accidental knocks. Even minor impacts can cause surface damage or cosmetic wear, potentially leading to more significant long-term issues. A master cylinder guard introduces a protective frame around the exposed area, helping reduce direct impact exposure while preserving brake functionality. This guard is engineered exclusively for the TVS Apache RTX 300. Model-specific design ensures that it aligns precisely with the original brake master cylinder and handlebar configuration. Proper fitment ensures that the guard provides protection without interfering with brake lever movement or control mechanism function, preserving safety and operational reliability. Designed Specifically for TVS Apache RTX 300 This is not a one-size-fits-all accessory. The Front Master Cylinder Guard for TVS Apache RTX 300 is crafted around the unique mounting points and spatial configuration of this model’s front assembly, ensuring: • Precise alignment with stock brake master cylinder position• No interference with brake lever or control cables• Maintained clearance for ergonomic control• Seamless integration with factory layout when installed properly Accurate fitment is critical for components positioned near control systems because even minor misalignment can affect usability or rider confidence. Stainless Steel Construction and Durability This guard is constructed from stainless steel, chosen for its corrosion resistance, strength, and endurance in demanding riding environments. Stainless steel resists rust and wear, which is especially important for components located near exposed filter and brake systems where water, dust, and road grit can accelerate wear. Stainless steel construction offers: • Resilience against corrosion and environmental exposure• Reliability under varied riding conditions• Structural integrity that resists deformation• Long-lasting performance with minimal maintenance This makes the guard not only protective but durable over repeated ride scenarios. Functional Protection in Real-World Conditions Motorcycles encounter various riding conditions where loose gravel, stones, and airborne debris can strike components directly. The front brake master cylinder is one of the exposed areas in such scenarios. A guard helps: • Reduce direct contact with loose road debris• Provide a protective buffer for sensitive brake components• Preserve exterior finish and structural surfaces• Output stable performance even in dusty or wet conditions Protective guards help maintain component condition, which in turn supports overall system longevity and reliability. It is important to define scope: this guard is intended to protect against minor surface impacts and debris contact. It does not replace routine brake maintenance or alter brake system performance characteristics. Practical Use Case This guard is suitable for: • Daily commuters navigating mixed road conditions• Touring riders covering highways and rural routes• Riders seeking enhanced protection for brake components• Owners focused on long-term component condition preservation Protecting the brake master cylinder helps keep critical controls operating smoothly and looking tidy despite constant environmental exposure. Installation and Fitment Professional installation is recommended to ensure proper alignment and secure mounting. Since this guard is designed specifically for the TVS Apache RTX 300, installation aligns with the factory handlebar and brake system layout when mounted as intended. Warranty • Lifetime Warranty on stainless steel guard and stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Organic High-Foam Car Shampoo Safe for Ceramic & Wax Coatings Experience controlled, coating-safe cleaning with the Spell Lab Fomal Haut Car Shampoo — an organic, eco-conscious wash solution engineered for clarity, lubrication, and surface preservation. Designed for enthusiasts and professional detailers alike, this formula delivers dense foam and high slip without stripping waxes, ceramic coatings, paint protection film, or synthetic sealants. Fomal Haut is positioned as one of South India’s early organic automotive shampoo formulations, combining mild surfactants with vibrant cosmic-grade color variants that elevate both performance and visual appeal. Available in two signature versions — Galactic Green (Fomal Haut 01) and Celestial Purple (Fomal Haut 02) — it transforms routine washing into a safe, controlled detailing process. This is a maintenance shampoo built for preservation, not chemical aggression. Coating-Safe Cleaning Performance Modern vehicles often carry multiple layers of surface protection. Traditional high-alkaline shampoos can degrade those layers gradually, reducing gloss retention and water beading performance. Fomal Haut is formulated specifically to: Clean without degrading wax Preserve ceramic coating integrity Maintain sealant effectiveness Remain safe for PPF surfaces Avoid harsh chemical stripping It effectively removes road grime, dust, light contaminants, and environmental residue while maintaining the integrity of protective layers underneath. This makes it ideal for routine maintenance washes rather than correction-level decontamination. Thick, Stable Foam Generation Foam isn’t just visual drama. Stable foam improves cleaning safety by encapsulating dirt particles and allowing them to lift away from paint before contact washing begins. Fomal Haut delivers: Dense, creamy foam structure Stable lather with controlled dwell time Even distribution across panels Smooth rinse-off without residue The foam remains stable long enough to soften dirt but rinses clean without leaving film or streaks. High Lubricity for Safer Contact Wash Surface lubrication is critical in reducing wash-induced marring. When lubrication is low, friction increases — and friction is what causes micro-scratches. This formula provides: High slip characteristics Smooth microfiber mitt glide Reduced drag during agitation Lower swirl risk during regular washes While technique always matters, the lubrication profile supports safer paint handling. Organic & Eco-Conscious Design Fomal Haut is built around a mild surfactant base designed to be gentler on both surfaces and the surrounding environment. Formulation highlights include: Organic-focused cleaning base Balanced cleaning strength Reduced harsh chemical content Safe for frequent maintenance cycles This makes it suitable for enthusiasts who wash their vehicles regularly and want consistent, non-stripping performance. Multi-Surface Compatibility Designed for complete exterior use, including: Painted panels Clear coat surfaces Plastics and trim Glass Wheels Always wash in shade and avoid hot panels to ensure optimal results. Signature Variant Options Fomal Haut 01 – Galactic GreenA vibrant green formulation with signature glow presentation. Fomal Haut 02 – Celestial PurpleA bold purple version offering identical cleaning performance with a distinct aesthetic. Both variants share the same cleaning base and coating-safe characteristics. Usage Instructions Foam Cannon Method Add 100 ml shampoo to 500 ml water. Top up with 900 ml water to reach full dilution. Apply foam evenly across the vehicle. Allow short dwell time (do not let dry). Rinse thoroughly. Bucket Wash Method Add 25–30 ml shampoo per 1.5 liters of water. Agitate to activate foam. Wash using microfiber mitt. Rinse and dry with clean microfiber towel. For best results, use with a pressure washer or foam lance system. Specifications Brand: Spell LabProduct Name: Fomal Haut Car ShampooQuantity: 300 mlType: LiquidEco-Friendly: YesSurface Compatibility: All vehicle exteriorsVariants: Green (Fomal Haut 01), Purple (Fomal Haut 02) What’s Included 1 × Spell Lab Fomal Haut Car Shampoo (300 ml) Important Notes Do not use on hot panels or under direct sunlight.Store in a cool, dry place.Keep cap tightly sealed after use.Shake lightly if product separation occurs.

Read more less

Product Overview of Glosil Chain Maintenance Kit The Glosil Chain Maintenance Kit is a carefully designed two-step chain care combo. It is crafted to clean, lubricate, and protect motorcycle drive chains during regular riding. This kit combines a dedicated chain cleaner and a chain lubricant, ideal for routine maintenance. Using the kit regularly supports smoother operation and extends the lifespan of the chain and sprocket. The Chain Maintenance Kit is an essential product for riders who want to keep their drivetrain in excellent condition. It ensures both performance and durability under normal usage. Thorough Cleaning for Better Lubrication The chain cleaner in this kit works effectively to remove dirt, grease, and residue buildup from the chain surface as well as between the links. Proper cleaning is a critical step before lubrication. This prepares the chain well, allowing the lubricant to penetrate and adhere deeply to the metal surfaces. By removing contaminants, the cleaner helps prevent premature wear and tear. This best practice enhances the overall functioning of your chain while maintaining the safety kit aspect of your maintenance routine. High-Performance Chain Lubrication The chain lube included in the kit is formulated to reduce friction and limit wear on the chain. After cleaning, applying the lubricant helps to improve chain movement and protect against corrosion. The lube forms a thin protective layer that guards the metal components. When these steps are used together as a system, the cleaner and lube combo supports consistent chain performance. Additionally, this reduces mechanical noise during operation, making your motorcycle ride smoother and more efficient. Kit Contents (as printed on packaging) This Chain Maintenance Kit contains two separate aerosol products packed together as a maintenance combo. It includes: Chain Cleaner — 1 unit, 90 g (140 ml) Chain Lube — 1 unit, 95 g (150 ml) Net Quantity: 185 g (290 ml) The combo pack is compact and convenient, making it easy for bikers to carry and use for regular chain maintenance. Both aerosol cans are designed to provide precise, controlled application with minimal mess. The kit is a practical and reliable choice for routine chain care. Intended Use of the Chain Maintenance Kit This kit is suitable for routine chain maintenance on various types of motorcycles. It effectively supports the upkeep of drive chains that experience regular wear and exposure. Beyond motorcycles, it can also be used on scooters and bicycles with exposed chain drives, wherever compatible. The products are specifically meant for external drivetrain use only. They are not intended to replace mechanical repairs or a full chain replacement when needed. By regularly using this maintenance kit, riders ensure the longevity and safety of their chain systems. It is an important addition to any motorcycle safety kit, ensuring that drivetrain components remain in optimal working order. Benefits of Using the Glosil Chain Maintenance Kit Complete two-step solution for chain care Cleaner removes dirt and prepares chain surface Lube reduces friction and provides corrosion resistance Smoothes chain operation and reduces mechanical noise Compact and convenient aerosol combo pack Overall, the Glosil Chain Maintenance Kit delivers excellent value for motorcycle owners. Regular maintenance with this kit enhances chain performance and maximizes safety. It is a trusted product for riders seeking a simple and effective chain care routine.

Read more less

LCB Master Cylinder Guard (SS) for Royal Enfield Himalayan – Stainless Steel Brake Reservoir Protection The LCB Master Cylinder Guard (SS) is a precision-manufactured stainless steel protector designed specifically for the Royal Enfield Himalayan's rear brake master cylinder. Built by Legundary Custom Builds, this guard shields the hydraulic reservoir from trail debris, mud spray, and stone strikes — the elements that create long-term damage on adventure-spec motorcycles. The rear brake master cylinder sits exposed on the Himalayan's swingarm area. In off-road environments, upward debris thrown by the front wheel and road spray from traffic can repeatedly impact the reservoir. While the stock setup functions correctly, the plastic housing offers no real impact buffer. The LCB guard forms a structural barrier that intercepts this exposure before it reaches the reservoir body. This is functional protection built around a specific failure point — not a visual accessory. Stainless Steel for All-Condition Reliability The guard is fabricated from high-grade stainless steel — the material of choice for components expected to perform under continuous outdoor exposure. Stainless steel resists oxidation without surface coating reliance, mud and moisture exposure during river crossings, road contaminants over long touring rides, and heat cycling near exhaust and engine zones. The brushed metallic finish integrates cleanly with the Himalayan's mechanical aesthetic — purposeful rather than decorative. Why Rear Brake Reservoir Protection Matters A cracked or contaminated rear brake reservoir creates cascading brake system issues. The LCB guard helps prevent direct impact cracks to the plastic reservoir body, contamination from mud or water ingress, reduced braking reliability from compromised fluid integrity, and expensive mid-trip repairs in remote locations. For riders touring in hilly, monsoon, or mixed-terrain conditions, protecting this component upfront costs far less than recovering from its failure. Direct Bolt-On Fitment Designed exclusively for the Royal Enfield Himalayan, this guard aligns with the motorcycle's OEM bracket geometry. Installation is direct bolt-on — no drilling, no welding, no improvised mounting. Service access to the reservoir cap remains unobstructed for routine brake fluid inspection and top-up. Key Features Designed specifically for Royal Enfield Himalayan High-grade stainless steel construction Brushed metallic finish for inherent corrosion resistance Shields rear brake reservoir from debris, mud, and impact Lightweight — no effect on handling or rear geometry Direct bolt-on installation without modification Full service access to brake reservoir cap maintained Construction Overview Material: High-Grade Stainless Steel | Finish: Brushed Stainless | Fitment: Royal Enfield Himalayan | Installation: Direct Bolt-On Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer's policy. For complete details, refer to your Warranty Policy.

Read more less

LCB Master Cylinder Guard Black for Royal Enfield Himalayan – Rear Brake Protection Upgrade The LCB Master Cylinder Guard in Black is a purpose-built protective component designed specifically for the Royal Enfield Himalayan. It reinforces one of the most exposed and critical elements of your braking system — the rear master cylinder — shielding it from impact, debris, and environmental wear during both off-road riding and everyday commuting. Adventure motorcycles operate in environments where flying gravel, trail debris, and uneven terrain are common. The rear master cylinder sits in a vulnerable position along the lower frame area. A direct hit from a stone or impact against trail obstacles can compromise braking efficiency or damage the reservoir housing. The LCB Master Cylinder Guard is engineered to reduce that risk without interfering with brake performance or serviceability. This is a compact component, but it plays a crucial mechanical role. Engineered for Structural Protection Constructed from heavy-duty mild steel, the guard is designed to absorb minor impact forces and deflect debris away from the master cylinder housing. Mild steel provides: High tensile strength Structural rigidity Vibration resistance Long-term durability under load The matte black powder-coated finish enhances corrosion resistance and protects the metal from oxidation caused by rain, humidity, and mud exposure. Himalayan riders frequently encounter mixed weather conditions, and protective components must withstand those elements without surface degradation. Durability is not aesthetic here. It is functional. Designed for Real-World Riding Conditions Off-road and touring riders regularly face: Gravel spray from front wheel rotation Trail debris impact Mud accumulation Unpredictable road hazards Even urban riding introduces risk from loose stones and potholes. The guard acts as a barrier between the master cylinder and these external elements. It helps prevent: Physical impact damage Direct debris contact Surface scratches and housing wear Potential fluid system compromise Braking reliability depends on protecting core hydraulic components. This guard strengthens that reliability. Precision Fitment for Himalayan Platform The LCB Master Cylinder Guard is designed exclusively for the Royal Enfield Himalayan, ensuring glove-fit alignment with the existing mounting points. It does not require drilling, cutting, or structural alteration. Installation is direct bolt-on using supplied hardware. Once installed: It sits flush against the mounting geometry It maintains correct brake hose routing It does not obstruct inspection access It preserves factory clearances A clean, integrated look ensures it appears purposeful rather than aftermarket. Compact Design with Functional Impact Unlike oversized guards that add visual clutter, this unit maintains a low-profile structure. It reinforces protection without interfering with footpeg clearance or riding posture. Small components often protect expensive systems. The master cylinder is central to rear brake operation. Protecting it prevents unnecessary downtime and repair expense. It strengthens mechanical reliability with minimal visual disruption. Key Features Designed specifically for Royal Enfield Himalayan Heavy-duty mild steel construction Matte black powder-coated corrosion-resistant finish Shields rear master cylinder from debris and impact Maintains brake system accessibility Compact design preserving factory aesthetics Direct bolt-on installation with no modifications required Construction Overview Material: Mild SteelFinish: Matte Black Powder CoatFitment: Royal Enfield HimalayanPosition: Rear Master Cylinder GuardInstallation: Direct Bolt-On Why This Upgrade Matters Braking systems rely on consistent hydraulic integrity. External impact can compromise that reliability. Adventure motorcycles are exposed to terrain conditions that standard road bikes rarely encounter. Adding structural protection to vulnerable components improves long-term durability and reduces mechanical risk. This guard enhances brake system resilience without altering performance characteristics. It is preventive protection, engineered with purpose. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. Refer to your Warranty Policy for full terms.

Read more less

Precision Stainless Steel Front Oil Cap for KTM Adventure 390 The LCB Tricorn Front Oil Cap for KTM Adventure 390 is a purpose-built upgrade designed to enhance durability, sealing integrity, and visual detail at the front oil reservoir. Engine components depend on clean, properly sealed systems. Even minor contamination can compromise long-term reliability. This oil cap adds a layer of protection while reinforcing the ADV390’s refined, mechanical aesthetic. On an adventure motorcycle, exposure is constant. Dust, rain, fine particles, and vibration are part of normal riding conditions. The front oil reservoir area, though compact, is not immune to debris intrusion or wear from repeated handling. A precision-engineered cap ensures consistent sealing while resisting corrosion and environmental fatigue. The Tricorn Oil Cap is constructed from high-grade stainless steel. Stainless steel offers several functional advantages over standard plated or coated components: High resistance to rust and oxidation Long-term structural durability Resistance to thermal cycling Stability under vibration Minimal maintenance requirement Adventure motorcycles encounter temperature variation, water crossings, and dust-heavy environments. Stainless steel construction ensures the cap maintains structural integrity and surface finish under these conditions. Precision Fitment & Sealing Integrity An oil cap must do more than look refined. It must seat correctly, maintain proper sealing pressure, and withstand repeated installation cycles. The Tricorn Oil Cap is engineered specifically for KTM Adventure 390 front oil reservoir dimensions. It aligns with factory threading and sealing specifications to ensure: Correct seating depth Stable closure under vibration No cross-thread risk when installed properly Reliable containment of fluid system There are no additional fittings required. No adapters. No modification. It installs directly into the designated location, preserving factory tolerances. Correct fitment is critical. A poorly fitted cap can introduce leakage risk or compromise oil pressure consistency. This component is designed to maintain OEM-level functional reliability. Protection Against Contaminants While the internal sealing is critical, the external structure also plays a protective role. The Tricorn design shields the reservoir opening area from: Dust accumulation Mud splatter Fine gravel Moisture exposure Reducing external contamination lowers the risk of debris entering the system during maintenance or inspection. For riders who tour frequently or ride in off-road environments, this small upgrade contributes to long-term mechanical cleanliness. Design & Aesthetic Integration Functional components should not disrupt design language. The Tricorn Oil Cap integrates seamlessly into the KTM Adventure 390 cockpit area. The geometric structure and laser-etched ADV branding provide a subtle visual enhancement without appearing oversized or decorative. It complements the motorcycle’s angular, performance-focused styling. The finish is engineered to resist fading and surface degradation over time, maintaining a consistent premium look even after extended exposure. Lightweight, No Handling Impact Performance motorcycles demand weight awareness. Although small, every component contributes to overall balance. The stainless construction is lightweight and compact, ensuring: No effect on steering geometry No interference with surrounding components Easy access for maintenance Clean integration with adjacent parts It enhances visual presence without adding unnecessary mass. Real-World Use Case Many riders overlook oil cap upgrades because they appear minor. However, mechanical reliability is built on attention to small details. A secure, corrosion-resistant oil cap: Maintains sealing integrity Reduces contamination risk Withstands repeated service cycles Enhances long-term durability For riders who log significant mileage or explore varied terrain, preventative upgrades matter. Key Features Designed specifically for KTM Adventure 390 High-grade stainless steel construction Corrosion and rust-resistant finish Precision-engineered direct fitment Protects oil reservoir from dust and debris Laser-etched ADV branding for refined detail Lightweight and maintenance-friendly design Construction Overview Material: High-grade stainless steelFinish: Corrosion-resistant polished surfaceFitment: KTM Adventure 390Installation: Direct-fit, no modification requiredApplication: Front oil reservoir cap Why This Upgrade Matters Adventure riding increases environmental exposure. Small protective upgrades compound into long-term reliability. A well-engineered oil cap ensures proper sealing, durability, and aesthetic cohesion within the cockpit area. The LCB Tricorn Front Oil Cap strengthens both form and function without altering factory performance characteristics. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Front Master Cylinder Guard MS for TVS Apache RTX 300 – Brake System Protection The Mototorque Front Master Cylinder Guard MS for TVS Apache RTX 300 is designed to provide protective coverage to the front brake master cylinder area. Built specifically for the TVS Apache RTX 300, this mild steel (MS) guard integrates with the motorcycle’s front brake assembly to add a layer of structural shielding without interfering with normal braking operation when installed correctly. The front master cylinder is a critical component in the braking system. It houses hydraulic mechanisms responsible for transmitting brake lever input into braking force. Positioned on the handlebar area, it remains exposed to external impact, accidental contact, and environmental elements. Even minor knocks or unintended contact can cause scratches or damage to this sensitive component. A master cylinder guard introduces a protective barrier around this exposed section. It helps reduce direct impact exposure while maintaining functional accessibility to the brake system. Designed Specifically for TVS Apache RTX 300 This front master cylinder guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures that the guard aligns correctly with the master cylinder layout and handlebar configuration of the motorcycle. Fitment advantages include: • Designed around the Apache RTX 300 brake assembly• Maintains clearance for brake lever operation• Integrates with factory positioning• No universal adjustment required when installed properly Accessories mounted near control systems must maintain operational freedom. A correctly fitted guard ensures that braking performance remains unaffected. Mild Steel Construction (MS) The guard is constructed using mild steel (MS), a material commonly used in protective motorcycle accessories due to its strength and structural durability. Mild steel offers: • Solid resistance to minor impact• Structural rigidity• Reliable durability for everyday riding• Suitability for protective applications The construction is intended to provide mechanical shielding around the master cylinder area, helping reduce potential surface damage from external contact. Functional Protection in Real-World Conditions During daily riding, motorcycles encounter: • Tight parking environments• Close traffic movement• Accidental handlebar contact• Roadside obstacles The front brake master cylinder sits in an exposed position that can be vulnerable in such scenarios. A guard provides an added protective frame around the component, helping reduce the risk of direct impact. It is important to define scope clearly. This guard is designed to provide structural protection against minor contact or low-impact situations. It is not intended to prevent damage in high-speed accidents or severe collisions. Practical Use Case This accessory suits: • Daily commuters navigating congested areas• Riders parking in confined spaces• Touring riders seeking additional component protection• Owners who prioritize safeguarding exposed brake components Protecting brake system components contributes to maintaining mechanical integrity. The master cylinder plays a direct role in braking function, making protective coverage a practical consideration. Installation and Fitment Considerations Professional installation is recommended to ensure proper alignment and secure mounting. Since this guard is positioned near a critical control system, correct fitment is important to avoid interference with lever movement or brake function. Designed specifically for the TVS Apache RTX 300, installation aligns with the motorcycle’s stock configuration when mounted properly. Build and Application • Designed for: TVS Apache RTX 300• Material: Mild Steel (MS)• Application: Front brake master cylinder protection This accessory integrates into the handlebar brake assembly area while maintaining operational clearance.

Read more less

LCB Front Brake Fluid Cap for Royal Enfield Himalayan – Stainless Steel Protection Upgrade The LCB Front Brake Fluid Cap is a precision-engineered protective upgrade built specifically for the Royal Enfield Himalayan. Designed to safeguard the front brake fluid reservoir from dust, debris, stone chips, and environmental exposure, this stainless steel guard enhances durability while maintaining the rugged identity of the Himalayan. Adventure motorcycles operate in unpredictable conditions. Trail dust, flying gravel, water splashes, and constant vibration all impact exposed components. The front brake fluid reservoir sits in a visible and functional area near the handlebar assembly, making it susceptible to contamination and surface damage over time. While the stock setup is functional, additional reinforcement adds long-term reliability—especially for riders who regularly tour or explore off-road terrain. This upgrade strengthens a critical braking component without interfering with performance, maintenance, or factory ergonomics. High-Grade Stainless Steel Construction The LCB Front Brake Fluid Cap is manufactured using premium stainless steel, selected for its structural integrity and corrosion resistance. Stainless steel provides: Resistance to rust and oxidation Long-term durability in humid and wet climates Stability under heat cycles Resistance to minor impacts and abrasion Unlike painted or coated mild steel accessories, stainless steel maintains its surface integrity even after repeated exposure to rain, mud, and temperature variations. This makes it particularly suitable for adventure motorcycles that encounter diverse environmental conditions. The brushed metallic finish enhances the Himalayan’s mechanical aesthetic. It does not appear decorative or excessive. Instead, it blends naturally with the utilitarian character of the motorcycle. Functional Protection Where It Matters The primary purpose of this cap is protection. It acts as a defensive layer over the front brake fluid reservoir area, helping to: Reduce direct contact from stones and debris Prevent accumulation of dust and grime around the reservoir Protect exposed fasteners from surface wear Maintain cleaner cockpit detailing Brake components are critical safety elements. While the cap does not modify braking performance, it contributes to maintaining component cleanliness and structural longevity. This is a subtle reinforcement that adds resilience without adding unnecessary bulk. Precision Fitment & Direct Installation Engineered specifically for the Royal Enfield Himalayan, the LCB Front Brake Fluid Cap aligns precisely with factory mounting points. Installation is straightforward: No drilling No cutting No wiring interference No permanent modification It installs using the supplied hardware and integrates seamlessly with the existing assembly. The fluid inspection window remains visible and accessible. Routine servicing remains unaffected. This ensures both functional compatibility and factory-level alignment. Designed for Touring & Off-Road Use The Himalayan platform is built for distance and terrain variation. Riders often travel through gravel roads, broken tarmac, hill routes, and highway stretches. Exposed components face constant exposure to vibration and environmental debris. Adding structural detailing like this cap helps: Maintain cleaner brake assemblies Improve long-term hardware longevity Preserve overall cockpit appearance Reinforce exposed mechanical sections For riders who prioritize durability and mechanical refinement, this upgrade adds tangible value. Key Features Custom-fit for Royal Enfield Himalayan Premium stainless steel construction Brushed metallic corrosion-resistant finish Shields brake fluid reservoir from debris and contaminants Lightweight design with no impact on handling Maintains visibility of brake fluid window Direct bolt-on installation Construction & Technical Overview Material: Stainless SteelFinish: Brushed MetallicFitment: Royal Enfield HimalayanApplication: Front Brake Fluid Reservoir ProtectionInstallation Type: Direct Bolt-OnWeight Impact: Minimal Why This Upgrade Is Practical Protective detailing prevents long-term wear. Adventure motorcycles are tools, not showroom pieces. Reinforcing exposed components improves reliability and keeps the machine looking intentional and well-maintained. This is not cosmetic trim. It is a functional reinforcement designed for riders who use their motorcycles as intended. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. Refer to your Warranty Policy for full terms.

Read more less

LCB Tricorn Front Brake Fluid Cap — Royal Enfield Himalayan 450 The LCB Tricorn Front Brake Fluid Cap is a precision-machined aluminium upgrade designed to protect the front brake fluid reservoir on the Royal Enfield Himalayan 450. The reservoir sits near the handlebar area in a high-exposure zone — constantly exposed to dust, rain, UV, and road grime. The Tricorn replaces the standard finish with a durable aluminium solution built for long-term reliability. Technical Specifications Brand Legundary Custom Builds (LCB) Material High-Grade Aluminium Finish Corrosion-Resistant Coating Application Front brake fluid reservoir cap Fitment Royal Enfield Himalayan 450 only Installation Direct replacement — no drilling or modification Key Features High-grade aluminium — excellent corrosion resistance, lightweight, high dimensional stability Precision-machined for exact fitment — correct thread alignment, secure seating against reservoir Protects reservoir from dust ingress, mud splashes, debris, and moisture exposure Tricorn geometric design — subtle cockpit accent without overpowering the handlebar area Zero impact on steering dynamics or handlebar balance Maintains full fluid inspection and serviceability access Compatibility Designed exclusively for the Royal Enfield Himalayan 450. Not a universal accessory. Thread pitch and mounting geometry are specific to this platform. Warranty 6-month manufacturer warranty from Legundary Custom Builds for defects in workmanship or material. Rawtorque does not provide additional warranty beyond manufacturer coverage.

Read more less

NGK Iridium IX LKAR8AI-9 Spark Plug – OEM-Spec Centre Plug for KTM & Bajaj (BS4 & BS6) The NGK Iridium IX LKAR8AI-9 spark plug is an OEM-spec ignition component designed for select KTM and Bajaj petrol engines where the LKAR8AI-9 spark plug specification is recommended. Manufactured by NGK to its Iridium IX construction standards, this spark plug is intended to provide consistent ignition performance and stable combustion when installed in compatible engines under normal operating conditions. Spark plugs play a critical role in petrol engines by igniting the air–fuel mixture inside the combustion chamber. Correct ignition timing and spark stability are essential for controlled combustion, dependable starting, and predictable engine operation. The LKAR8AI-9 is engineered to meet these requirements when used in engines that specify this exact plug code. Iridium IX Spark Plug Construction The LKAR8AI-9 features a 0.6 mm fine-wire iridium centre electrode, laser-welded to improve electrode durability under repeated heat cycles. Iridium is selected for spark plug electrodes due to its high melting point and resistance to electrode erosion when compared to conventional nickel-alloy materials. This spark plug also incorporates NGK’s ceramic insulator and resistor design, which are intended to support electrical insulation, suppress electromagnetic interference, and manage heat dissipation during engine operation. The plated metal shell is designed to resist corrosion and support durability during routine installation and removal. The LKAR8AI-9 is manufactured as a like-for-like replacement component. It does not alter engine tuning, ignition timing, compression ratio, or fuel delivery characteristics. Intended Application & Compatibility The NGK LKAR8AI-9 spark plug is specified for select KTM and Bajaj motorcycle engines only where this exact plug code is listed in official service or maintenance documentation. KTM – Direct Replacement Applications (BS4 & BS6) Duke 125 Duke 200 Duke 250 Duke 390 RC 125 RC 200 RC 390 Adventure 250 Adventure 390 (Gen 1 and BS6) Bajaj – Centre Spark Plug (Triple-Spark Engines) Dominar 250 – Centre plug Dominar 400 – Centre plug Pulsar NS400Z – Centre plug Pulsar NS200 – Centre plug Pulsar RS200 – Centre plug Pulsar AS200 – Centre plug Compatibility applies only where LKAR8AI-9 is the specified spark plug code. Engines using a different spark plug specification should not use this model, even if displacement or engine platform appears similar. Important Note for Triple-Spark Engines Certain Bajaj engines use a three-spark-plug cylinder head configuration. In these engines: 1 × LKAR8AI-9 is used as the centre spark plug 2 × CPR8EAIX-9 are used as the side spark plugs This product listing is only for the centre spark plug (LKAR8AI-9). Buyers should confirm the correct quantity and plug positions before purchase. Specification-Based Use Spark plug codes define critical parameters including: Thread size and reach Heat range Electrode configuration Terminal type Using the correct spark plug specification ensures proper fitment and correct thermal behaviour within the combustion chamber. Installing an incorrect spark plug may result in improper combustion or long-term engine issues. The LKAR8AI-9 is not intended as a universal performance upgrade. It is designed strictly to meet the specification requirements of engines that call for this exact plug code. Replacement & Service Considerations Spark plugs are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals. While iridium spark plugs are generally designed for improved durability compared to conventional nickel plugs, actual replacement timing depends on riding conditions, fuel quality, engine condition, and maintenance practices. The NGK LKAR8AI-9 is supplied as a single spark plug. Buyers should confirm the number of spark plugs required for their specific engine configuration before purchase. Installation should follow standard service procedures, including correct tightening torque and clean thread conditions. Summary The NGK Iridium IX LKAR8AI-9 spark plug is an OEM-spec ignition component intended for select KTM and Bajaj motorcycles where this spark plug specification is recommended. Built with a fine-wire iridium centre electrode and NGK’s proven construction standards, it is designed to support stable ignition and reliable combustion when used as a direct replacement in compatible engines. Correct compatibility verification and proper installation are essential before use.

Read more less

Reservoir Oil Guard SS for TVS Apache RTX 300 – Hydraulic Fluid Protection Accessory The Mototorque Reservoir Oil Guard SS for TVS Apache RTX 300 is engineered to provide structural protection for the front brake and clutch reservoir oil bottles. Designed specifically for the TVS Apache RTX 300, this guard is crafted from stainless steel (SS) and built to shield the hydraulic fluid reservoirs from stones, debris, accidental knocks, and everyday environmental exposure during city riding, touring, or trail use. Brake and clutch reservoirs are vital components of the hydraulic control systems. Positioned near the handlebar area, these compact fluid containers are exposed to the elements and potential impacts from road debris, fallen objects, or close traffic movement. Even minor damage to these components can lead to fluid leakage, compromised performance, or costly replacement. A reservoir guard introduces a protective barrier — helping reduce direct contact with external hazards while preserving normal hydraulic function when installed correctly. This reservoir oil guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures precise alignment with the motorcycle’s brake and clutch reservoir geometry, maintaining proper clearance for control cables, lever movement, and handlebar operation. Designed Specifically for TVS Apache RTX 300 This accessory is not a universal solution. It is structured around the defined mounting and reservoir layout of the TVS Apache RTX 300 to ensure: • Precise alignment with factory reservoir positioning• Full clearance for brake and clutch lever travel• No interference with fluid lines or cable routing• Seamless integration with the motorcycle’s front assembly Accurate fitment is important because reservoir mounts sit near essential controls — even minor misalignment can affect usability or serviceability. Stainless Steel Construction and Durability The guard is constructed from stainless steel (SS), chosen for its durability, corrosion resistance, and endurance in demanding riding environments. Stainless steel offers long-term resilience against rust, rain exposure, dust, and road grime — which is especially important in components that are in direct contact with hydraulic systems and exposed elements. Stainless steel construction provides: • High corrosion resistance and rust protection• Structural rigidity under impact exposure• Minimal deformation under real-world riding conditions• Low-maintenance durability This material choice ensures that the guard continues to provide protection even after extended use in varied environmental conditions. Functional Protection in Real-World Riding Conditions Motorcycles are regularly exposed to: • Loose gravel and stones on highways• Dust and particulate matter on rural roads• Water and spray during wet conditions• Close-quarter contact in urban traffic Hydraulic reservoir bottles, while compact, are continuously exposed to such conditions. Without protection, even minor impacts can leave scratches or cracks that may compromise the fluid compartment integrity. A reservoir guard introduces a protective shield that helps deflect incidental impacts and preserves the component’s structural condition. It’s important to clarify scope: this accessory is designed to reduce exposure to surface impact and debris contact. It does not alter hydraulic performance or replace regular maintenance procedures such as fluid checks or brake/clutch bleeding. Practical Use Cases This reservoir oil guard is suitable for: • Daily commuters navigating city streets• Touring riders covering long distances• Riders crossing mixed terrains• Owners focused on preserving control system integrity Reservoir protection helps maintain the condition of exposed hydraulic components, which in turn supports consistent brake and clutch performance. Installation and Fitment Professional installation is recommended to ensure secure alignment and proper torque settings. Mounting accessories near control systems requires accurate positioning to avoid interference with controls or cable routing. Because this reservoir oil guard is designed specifically for the TVS Apache RTX 300, installation aligns with the motorcycle’s handlebar and reservoir geometry when mounted correctly. Build and Application • Designed for: TVS Apache RTX 300• Material: Stainless Steel (SS)• Application: Brake & clutch reservoir oil protection This accessory integrates with the motorcycle’s front assembly while maintaining intended control accessibility and fluid line routing. Warranty • Lifetime Warranty on stainless steel reservoir guard and stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Motul C1 Chain Clean 400 ml – Motorcycle Chain Cleaner for O-Ring, X-Ring & Z-Ring Chains Keeping your motorcycle chain clean is not optional. It directly affects throttle smoothness, drivetrain efficiency, and long-term sprocket life. Motul C1 Chain Clean is a purpose-built chain cleaning spray engineered specifically for motorcycles running O-ring, X-ring, and Z-ring chains. It removes old lubricant, embedded dust, sand, and road grime without damaging sealing rings. This is not a general-purpose degreaser. It is formulated to work safely with modern sealed chains, where protecting rubber components is as important as removing contamination. When used before re-lubrication, it restores proper chain movement and prepares the surface for fresh lubricant bonding. Why Proper Chain Cleaning Matters A motorcycle chain operates in one of the harshest environments on the bike. It constantly faces dust, water, grease, and heat. When old lubricant mixes with debris, it forms an abrasive paste that accelerates wear on both the chain rollers and sprocket teeth. Regular cleaning with Motul C1 Chain Clean 400 ml helps: Maintain smooth power delivery Reduce drivetrain drag Prevent premature chain stretch Improve lubrication efficiency Extend chain and sprocket service life Cleaning before lubrication ensures the new chain lube adheres properly instead of sitting on contaminated residue. Designed Specifically for Sealed Chains Modern motorcycles use O-ring, X-ring, and Z-ring chains to retain internal lubrication between the pins and bushings. Aggressive cleaners can damage these rubber seals, leading to internal wear. Motul C1 Chain Clean is compatible with sealed chains and is formulated to remove surface contamination while preserving internal seal integrity when used as directed. It is safe for use on road bikes, touring motorcycles, commuter bikes, and performance machines. 400 ml Aerosol Format – Controlled & Efficient Application The 400 ml aerosol spray format allows precise application directly onto chain links. The spray pattern helps penetrate between rollers and side plates, loosening hardened grease and road buildup. It is designed to act quickly. After application, contaminants can be wiped away using a clean cloth or brushed off using a chain cleaning brush. Once dry, the chain is ready for fresh lubrication. This product is a cleaner only. It does not provide lubrication. A suitable chain lube must be applied after cleaning and drying. Intended Use Motul C1 Chain Clean is recommended for: Cleaning motorcycle drive chains Removing old chain lubricant residue Degreasing chain links before re-lubrication Routine maintenance of O-ring, X-ring, and Z-ring chains It is used as a preparatory maintenance step. It is not a performance additive or chain lubricant. How to Use For best results: Place the motorcycle on a center stand or paddock stand. Spray evenly across the entire chain length. Allow the cleaner to act for a few minutes. Wipe with a clean cloth or use a chain brush if needed. Let the chain dry completely. Apply appropriate motorcycle chain lubricant. Avoid spraying directly onto brake components or tyres. Who Is It For? If you ride daily in city traffic, tour long distances, or expose your bike to dust and rain, routine chain maintenance becomes critical. Motul C1 Chain Clean 400 ml is built for riders who maintain their motorcycle properly rather than waiting for drivetrain noise or stiffness to appear. It supports consistent chain operation and reduces abrasive buildup that can accelerate wear. Key Features 400 ml aerosol spray format Designed for motorcycle drive chains Compatible with O-ring, X-ring, and Z-ring chains Removes old grease, dirt, sand, and road contaminants Intended for use prior to chain lubrication Suitable for road, touring, commuter, and performance motorcycles Specifications Brand: MotulProduct Name: C1 Chain CleanType: Motorcycle Chain Cleaner SprayVolume: 400 mlApplication: Drive Chain CleaningCompatibility: O-ring, X-ring, Z-ring chainsFormat: Aerosol Important Note This product is a chain cleaner only. It does not provide lubrication. Always apply a compatible motorcycle chain lubricant after cleaning and drying for proper drivetrain protection.

Read more less

Aluminum Front Oil Cap for Hero XPulse 200 4V Pro – Precision Engine Seal Upgrade The LCB Tricorn Front Oil Cap for Hero XPulse 200 4V Pro is a precision-machined aluminum replacement component designed to enhance durability, sealing reliability, and aesthetic refinement. Engineered by Legundary Custom Builds specifically for the XPulse 200 4V Pro platform, this oil cap delivers a secure fit while upgrading the stock appearance with a clean, performance-inspired finish. Although compact in size, the oil cap plays a critical role in maintaining engine integrity. It seals the oil chamber opening, helping preserve proper lubrication pressure while preventing contaminants from entering the system. The Tricorn Front Oil Cap is built to deliver structural strength and consistent sealing under regular riding conditions. This is not a cosmetic add-on. It is a functional engine component designed with precision tolerances. Precision-Machined Aluminum Construction The Tricorn Oil Cap is manufactured from high-grade aluminum to balance strength, corrosion resistance, and lightweight performance. Material advantages include: • High structural durability• Resistance to oxidation and corrosion• Stability under heat exposure• Long-term reliability in mixed weather conditions Aluminum is widely used in performance components due to its strength-to-weight efficiency and natural resistance to rust. Unlike standard plastic or low-grade alloy caps, this aluminum oil cap offers improved rigidity while maintaining minimal weight impact. The precision machining process ensures consistent dimensional accuracy for proper sealing performance. Engine Sealing & Pressure Retention The oil cap serves an essential role in sealing the oil chamber and maintaining internal system integrity. A properly fitted oil cap helps: • Prevent oil seepage• Maintain internal pressure balance• Protect against debris entry• Support consistent lubrication The LCB Tricorn Front Oil Cap is designed to fit securely into the designated oil chamber opening on the Hero XPulse 200 4V Pro, aligning with OEM specifications. Sealing effectiveness depends on correct installation and proper maintenance of the sealing gasket or O-ring (if applicable). Designed Specifically for XPulse 200 4V Pro The Tricorn Oil Cap is engineered exclusively for: Hero XPulse 200 4V Pro Fitment features include: • OEM-spec threading compatibility• Direct replacement design• No modification required• Factory-aligned fit Because it is platform-specific, installation is straightforward and maintains factory tolerances without forcing or cross-threading. Always ensure the engine is cool before removal or installation of oil-related components. Silver Performance Finish The sleek silver finish enhances both durability and visual appeal. Finish characteristics: • Corrosion resistance• Clean metallic appearance• Scratch tolerance under regular handling• Long-lasting surface stability The silver tone complements other aluminum or performance accessories, subtly elevating the motorcycle’s engine area without appearing excessive. Minor cosmetic marks from tool contact during installation are normal and do not affect functionality. Lightweight Yet Structurally Robust Although small, weight distribution matters on a performance motorcycle. The aluminum construction ensures: • Minimal additional weight• Maintained engine balance• Durable thread integrity• Resistance to deformation The cap is engineered to withstand repeated installation and removal during service intervals without premature wear. Built for Real-World Riding Conditions The LCB Tricorn Front Oil Cap is suitable for: • Daily commuting• Adventure touring• Off-road riding• High-temperature environments• Dust-heavy terrain Its corrosion-resistant material and precision threading make it reliable for varied riding conditions. Installation & Usage Notes • Install on a cool engine• Ensure threads are clean before installation• Avoid over-tightening• Confirm secure seating after installation Professional installation is recommended for riders unfamiliar with engine service procedures. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Tricorn Front Oil CapMaterial: High-Grade AluminumFinish: SilverFitment: Hero XPulse 200 4V ProApplication: Engine Oil Chamber Cap Replacement Important Notes Confirm motorcycle compatibility before purchase.Install only on the specified model.Ensure correct torque during installation.Routine inspection during oil service is recommended.

Read more less

Stainless Steel Rear Brake Fluid Cap Guard for Royal Enfield Himalayan The LCB Rear Brake Fluid Cap (SS) is a precision-built protective upgrade for the Royal Enfield Himalayan, engineered to safeguard one of the most exposed yet overlooked components of your braking system — the rear brake fluid reservoir. On the Himalayan, the rear master cylinder reservoir sits in a vulnerable zone. Mud spray, gravel strikes, and trail debris can repeatedly impact this area during off-road riding. While the stock cap performs its sealing function, it offers minimal protection against direct external impact. That’s where the LCB stainless steel guard steps in — reinforcing the reservoir zone without altering brake performance or service access. This is not cosmetic trim. It is functional shielding designed for riders who use their Himalayan as intended. Stainless Steel Construction for Real-World Abuse The guard is fabricated from high-grade stainless steel, chosen specifically for its: Impact resistance Structural rigidity Long-term corrosion resistance Resistance to heat and road contaminants Unlike coated mild steel, stainless steel resists oxidation even when exposed to rain, river crossings, humidity, and long-distance touring conditions. There is no reliance on surface paint for corrosion protection — the material itself provides inherent durability. The brushed metallic finish complements the Himalayan’s utilitarian character, adding a mechanical, purpose-built appearance rather than decorative flash. Why Rear Brake Reservoir Protection Matters Your rear brake fluid reservoir plays a critical role in hydraulic braking consistency. Damage to this area can result in: Cracked plastic reservoir housing Contaminant ingress Compromised braking performance Unnecessary downtime during trips Off-road terrain amplifies this risk. Loose stones thrown by the front wheel can impact the reservoir area at speed. Even urban potholes and construction debris can create unexpected hazards. The LCB Rear Brake Fluid Cap Guard forms a protective barrier between the environment and the reservoir body. It reduces direct impact exposure while still allowing proper ventilation and service access. Protection here is preventative maintenance in physical form. Precision Fitment for Royal Enfield Himalayan This unit is engineered specifically for the Royal Enfield Himalayan platform, ensuring: Correct mounting alignment No interference with brake hose routing No obstruction of inspection visibility No compromise to serviceability Installation is direct bolt-on. No drilling.No fabrication.No bracket improvisation. Mounting points align with the factory layout, maintaining OEM geometry and preserving the bike’s structural integrity. Once installed, the guard sits flush and stable — with no vibration chatter or loose tolerance. Lightweight, Functional Design Although stainless steel is inherently strong, the design avoids unnecessary bulk. The guard is structured to provide impact coverage without adding excess weight to the rear assembly. Weight distribution remains unaffected. Handling characteristics remain unchanged. What you gain is reinforcement — not mass. Aesthetic Integration The brushed stainless finish enhances the rear assembly with a clean, mechanical detail that blends seamlessly with the Himalayan’s exposed-frame aesthetic. It doesn’t shout.It doesn’t distract.It reinforces the bike’s functional identity. For riders who pay attention to component-level upgrades, this is a detail that makes sense both visually and mechanically. Built for Touring & Trail Use The Royal Enfield Himalayan is designed for: Long-distance touring Mountain passes Broken terrain Mixed-surface exploration Component protection reduces the risk of small failures turning into ride-ending problems. A cracked brake reservoir miles away from service access is avoidable. The LCB Rear Brake Fluid Cap Guard is designed to minimize that possibility. When the terrain becomes unpredictable, protection should already be in place. Key Features Designed specifically for Royal Enfield Himalayan High-grade stainless steel construction Brushed metallic finish for corrosion resistance Shields rear brake reservoir from debris and impact Lightweight structure with no effect on handling Direct bolt-on installation Maintains service accessibility Construction Overview Material: High-grade stainless steelFinish: Brushed stainlessFitment: Royal Enfield HimalayanInstallation: Direct bolt-onApplication: Rear brake fluid reservoir protection Why This Upgrade Makes Practical Sense Adventure motorcycles are exposed machines. External hydraulic components require defensive reinforcement when riding off-road or touring in unpredictable conditions. The LCB Rear Brake Fluid Cap (SS) strengthens a vulnerable point without altering performance, balance, or maintenance access. It is a small component upgrade with long-term reliability benefits. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

The Maddog Switch is the no-fuss plug-and-play toggle for your auxiliary lights, fog lights, or any ancillary electrical accessory on your bike. Dual mounting option — mirror stem clip included — lets you position it exactly where you want it. The red backlit switch looks sharp at night and holds up through daily riding conditions.Built from ABS with solid construction, it connects directly into the Maddog Wireharness (sold separately) without any splicing or modification. If you already have the Maddog Wireharness and just need a clean switch, this is the one.Kit Contents: Switch Mirror mounting clamp Screw set Note: This switch is not compatible with the Switch Pro or Wire Harness Pro. For the integrated switch + harness solution, see Maddog Switch and Wire Harness Pro.

Read more less

The LCB Casque Rear Brake Fluid Guard for Royal Enfield Himalayan 450 is a purpose-built protection accessory designed to shield one of the most exposed and overlooked components on your motorcycle — the rear brake fluid reservoir. On an adventure machine like the Himalayan 450, even small impacts, flying debris, or rough terrain can affect exposed brake components. This guard adds a layer of mechanical security without altering your bike’s design language. Designed by Legundary Custom Builds, the Casque Rear Brake Fluid Guard is engineered specifically for the Royal Enfield Himalayan 450. It is not a universal part. The fitment follows the factory mounting geometry, ensuring a precise and stable installation without modification. Once installed, it integrates seamlessly into the frame area, maintaining OEM alignment and clean aesthetics. Strong Yet Lightweight Aluminum Construction The LCB Casque Rear Brake Fluid Guard for Royal Enfield Himalayan 450 is constructed from high-grade aluminum. This material offers an ideal balance between strength and weight efficiency. It provides structural protection while keeping the overall motorcycle weight increase minimal. Unlike bulkier steel alternatives, aluminum resists corrosion naturally. This is particularly important for riders who encounter monsoon conditions, muddy trails, or long-distance touring environments. The guard maintains structural integrity without adding unnecessary strain to mounting points. Casque-Inspired Design Identity LCB calls this the “Casque” design, and that naming reflects its sculpted, protective profile. The shape is not decorative alone. The curvature and surface coverage are engineered to shield the brake fluid reservoir from frontal debris and side exposure. The design complements the Royal Enfield Himalayan 450’s adventure-focused silhouette. It enhances visual detail without overpowering the stock form. Riders who value clean, mechanical aesthetics will appreciate how the guard blends into the motorcycle’s structure rather than looking like an afterthought. Model-Specific Fitment for Himalayan 450 The LCB Casque Rear Brake Fluid Guard is built exclusively for the Royal Enfield Himalayan 450. It is not compatible with earlier Himalayan generations. The mounting alignment matches the Himalayan 450’s frame geometry and reservoir positioning. Correct fitment is essential for protection components. Poorly aligned guards can create vibration, rattling, or stress on fasteners. This unit is engineered to avoid those issues when installed correctly. Real-World Protection Benefits Adventure motorcycles are designed for varied terrain. Gravel roads, highway debris, and uneven surfaces are common use scenarios. The rear brake fluid reservoir remains partially exposed in stock form. By installing the LCB Casque Rear Brake Fluid Guard for Royal Enfield Himalayan 450, riders add a structural barrier between the reservoir and external impact sources. This reduces the risk of accidental damage during minor falls, tip-overs, or trail riding incidents. It is not a crash cage. It is a precision protection component designed for practical, real-world riding environments. Finish & Surface Treatment The guard features a matte-finished surface that complements the Himalayan’s rugged styling. The finish resists visible wear and helps maintain a clean look over time. Aluminum’s natural corrosion resistance adds long-term durability even in humid climates. Installation Overview Installation should be carried out using appropriate tools and torque settings. The guard mounts using the designated factory points on the Royal Enfield Himalayan 450. No drilling or frame modification is required. Professional installation is recommended if you are unfamiliar with motorcycle accessory mounting procedures. What’s Included LCB Casque Rear Brake Fluid Guard for Royal Enfield Himalayan 450Mounting hardware as supplied by Legundary Custom Builds Specifications Brand: Legundary Custom Builds (LCB)Product Name: Casque Rear Brake Fluid GuardMaterial: High-Grade AluminumFinish: MatteMotorcycle Compatibility: Royal Enfield Himalayan 450Application: Rear Brake Fluid Reservoir Protection Warranty This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy.

Read more less

LCB Buckler Master Cylinder Guard for Royal Enfield Himalayan 450 – Aluminium Protection Upgrade The LCB Buckler Master Cylinder Guard for the Royal Enfield Himalayan 450 is a precision-built aluminium upgrade created to protect one of the motorcycle’s most exposed and essential braking components. Compact in dimension yet critical in function, this guard reinforces the master cylinder area against debris, minor impacts, and harsh riding environments without adding unnecessary weight or visual clutter. On an adventure motorcycle like the Himalayan 450, exposed mechanical components operate under constant environmental stress. Gravel spray, mud splashes, loose stones, pressure washing, and unpredictable trail contact all increase the risk of surface damage over time. While the master cylinder may appear small, it plays a direct role in braking reliability. The Buckler Guard is engineered to create a protective barrier while maintaining access, airflow, and factory alignment. Built from High-Grade Aluminium Constructed from premium-grade aluminium, the Buckler Guard delivers durability without excess mass. Aluminium is selected specifically for its corrosion resistance, structural stability, and excellent strength-to-weight ratio. Unlike untreated steel components, aluminium naturally resists rust and performs reliably across varying weather conditions, including rain, humidity, and temperature shifts. Material advantages include: • High corrosion resistance• Lightweight structural integrity• Stable performance under heat cycles• Long-term surface durability• Minimal maintenance requirements Weighing just 0.040 kg, the guard strengthens protection without influencing brake feel, balance, or handling dynamics. Precision-Engineered for Himalayan 450 This is not a generic universal cover. The Buckler Guard is developed exclusively for the Royal Enfield Himalayan 450 platform, ensuring accurate fitment and correct alignment with the master cylinder housing. Fitment advantages: • Direct bolt-on installation• No drilling or modifications required• Factory-aligned mounting geometry• Stable, vibration-free positioning Because the guard integrates with existing mounting architecture, installation remains clean and reversible. The component does not interfere with hydraulic lines, brake actuation, or routine servicing access. Protection Without Compromise The master cylinder transfers hydraulic force from the brake lever to the caliper system. Any external damage to its housing can compromise performance or create long-term reliability concerns. Adding structural shielding reduces exposure to impact and contamination. The Buckler Guard helps defend against: • Stone chips and flying gravel• Mud accumulation• Minor trail strikes• Abrasive contact during off-road riding• Environmental corrosion factors Importantly, the design does not trap heat or obstruct airflow around the braking system. Protection is delivered without compromising mechanical function. Buckler-Inspired Design Integration The geometric buckler-style profile introduces a purposeful visual accent to the Himalayan 450’s rugged architecture. Finished in silver, it complements existing metallic components and aligns with the motorcycle’s adventure-focused aesthetic. The guard enhances presence without appearing oversized or decorative. It reinforces a mechanical, functional character consistent with the Himalayan’s design philosophy. Compact Dimensions, Focused Engineering Dimensions: 5 × 7 × 3 cmWeight: 0.040 kgMaterial: AluminiumColor: Silver Its compact footprint ensures protection remains targeted to the critical zone, preserving surrounding clearance and mechanical accessibility. Designed for Real-World Riding Adventure motorcycles operate across unpredictable surfaces. Even daily commuting exposes components to debris, moisture, and road contaminants. Reinforcing exposed zones improves long-term durability and reduces unnecessary wear. The Buckler Guard supports: • Long-distance touring• Mountain terrain riding• Gravel and off-road travel• Urban commuting in varied conditions• All-weather usage It is engineered as a structural safeguard rather than a cosmetic addition. Key Features • Designed specifically for Royal Enfield Himalayan 450• High-grade aluminium construction• Corrosion-resistant silver finish• Protects master cylinder from debris and minor impacts• Lightweight 0.040 kg build• Direct-fit bolt-on installation• Buckler-inspired design integration Why This Upgrade Makes Mechanical Sense Brake system performance depends on component integrity. The master cylinder is positioned in an exposed area vulnerable to trail hazards and environmental wear. Strengthening this zone improves durability without altering braking characteristics or requiring system modifications. The LCB Buckler Master Cylinder Guard reinforces a critical component while maintaining the Himalayan 450’s balance, function, and mechanical discipline.

Read more less

Idemitsu IRG7 10W-30 MA2 Fully Synthetic Motorcycle Engine Oil (1L) The Idemitsu IRG7 10W-30 MA2 Fully Synthetic Engine Oil is formulated using advanced Septet Guard Technology, delivering flagship Idemitsu performance with high protection, optimized horsepower delivery, and strong acceleration characteristics. Engineered with racing oil technology, IRG7 minimizes oil evaporation at ultra-high temperatures and maintains performance stability until the next oil change interval. It is designed for motorcycles that recommend 10W-30 MA2 engine oil. Application • For motorcycles recommending 10W-30 engine oil• Meets and exceeds JASO MA2• Quality level equivalent to API SN Septet Guard Technology Septet Guard Technology integrates seven performance advantages that work together under varied riding conditions to optimize engine protection and riding performance. Depending on riding conditions, these seven benefits combine differently to maximize engine response and durability. 7 Ultra-Protective Advantages • Maximum horsepower support• Rocket starts• Silky smooth shift feel• Great wet clutch performance• Piston cleanliness (13x improvement noted in graphic)• Anti-wear protection (40x improvement noted in graphic)• High shear stability Product Specifications • Brand: Idemitsu• Product Name: IRG7• Viscosity Grade: 10W-30• Performance Standard: JASO MA2• Quality Level Equivalent: API SN• Type: Fully Synthetic• Volume: 1 Litre

Read more less

Motul 5100 10W-50 4T Semi-Synthetic Motorcycle Engine Oil (1L) Motul 5100 10W-50 4T is a semi-synthetic motorcycle engine oil developed using Motul’s advanced Technosynthese® formulation. It is engineered for everyday riding as well as light adventure use. Specifically designed for four-stroke motorcycles operating in diverse riding environments, this motorcycle engine oil delivers balanced performance, reliable protection, and consistent clutch operation across various temperatures. This lubricant suits both on-road and off-road engines where durability, smooth operation, and long service life matter most. The 10W-50 viscosity grade ensures stable lubrication through high-temperature rides and reliable oil circulation during cold starts. This mix makes it ideal for riders facing varied conditions like city commuting, highway riding, and occasional off-road use on machines including the royal enfield classic 350. Engine Protection & Technosynthese® Formulation of Motorcycle Engine Oil The Motul 5100 10W-50 4T uses an ester-reinforced base combined with Technosynthese® technology. This semi-synthetic formulation is designed to optimize engine protection by maintaining a stable lubrication film under engine load. The ester-reinforced base helps oil stick to metal surfaces, ensuring continuous lubrication during operation. This advanced formulation reduces engine wear internally and maintains consistent oil performance throughout service intervals. By protecting moving components inside the engine, it supports long-term reliability for everyday riding and longer trips. Smooth Clutch & Gearbox Operation This oil is engineered for bikes where it lubricates both the gearbox and wet clutch. The smooth shifting it supports comes from stable friction characteristics. These characteristics ensure consistent clutch engagement across shifting temperatures. Predictable clutch behavior boosts rider confidence in stop-and-go city traffic or rough off-road terrain. Clutch smoothness is essential for riders who endure frequent stops, varied surfaces, or extended riding sessions on motorcycles including the bmw s1000rr. Thermal Stability & Oil Life Motul 5100 10W-50 4T maintains stable performance over a wide temperature range. Its viscosity stability guarantees consistent lubrication during high-heat conditions, safeguarding engine parts on long or demanding rides. This formulation also extends the oil’s usable life, allowing riders to go longer between oil changes by following manufacturer guidelines. Stable oil quality supports cleaner and more predictable engine behavior during daily use. Compatibility & Certification of Motorcycle Engine Oil This product meets strict API SP and JASO MA2 (2023) standards. These certifications confirm its compatibility with modern four-stroke motorcycles. It includes compatibility for engines fitted with catalytic converters. JASO MA2 approval ensures suitability for bikes with wet clutch systems, preventing clutch slippage. Motul 5100 10W-50 4T is intended for motorcycles specifying a 10W-50 viscosity and matching performance requirements. Users should always consult their motorcycle’s owner manual before selecting any oil product. Intended Riding Use Motul 5100 10W-50 4T suits riders wanting balanced engine oil for various uses: Daily commuting Highway riding Light adventure and mixed terrain use On-road and off-road motorcycles This oil is designed for users who prioritize reliable engine protection, smooth operation, and endurance between service intervals. It is not fully racing-oriented but offers a dependable balance for everyday and adventure riding. Technical Specifications Product Name: Motul 5100 10W-50 4T Oil Type: Semi-Synthetic Technology: Technosynthese® with ester-reinforced base Viscosity Grade: 10W-50 Engine Type: 4-stroke motorcycles Standards: API SP, JASO MA2 (2023) Catalytic Converter Compatibility: Yes Packaging Size: 1 Litre Handling & Storage To avoid contamination, use clean tools when changing oil. Store the container in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed after every use to maintain oil quality. Discard used oil responsibly via authorized recycling centers following local regulations. Proper handling preserves the oil’s performance and protects the environment. Motul 5100 10W-50 4T Technosynthese engine oil provides riders with a dependable balance between engine protection, performance, and oil longevity. Featuring its proprietary ester-reinforced Technosynthese® formulation, along with API SP and JASO MA2 (2023) certifications, this product supports both on-road and off-road machines. Through consistent lubrication, thermal stability, and smooth clutch operation, it ensures reliable engine protection across diverse riding scenarios. It is an excellent choice for riders seeking high-quality semi-synthetic motorcycle engine oil with extended service intervals.

Read more less

NGK CR8EAIX-9 Iridium Spark Plug for Yamaha R15, MT-15, R3, Aerox and Jawa Yezdi Motorcycles The NGK CR8EAIX-9 Iridium IX Spark Plug is designed as a direct replacement upgrade for multiple Yamaha, Jawa, and Yezdi motorcycles and scooters. Built using NGK’s iridium electrode technology, this spark plug is engineered for consistent ignition performance and long service life. The plug features a fine tip iridium center electrode, supported by a copper core and ceramic resistor design. This construction is designed to deliver reliable spark generation across varying riding conditions while maintaining stable engine operation. The NGK CR8EAIX-9 iridium spark plug is compatible with a wide range of motorcycles including Yamaha R15 (V1, V2, V3, V4), MT-15, R3, MT-03, Aerox, NMax 155, along with Jawa and Yezdi models. It installs as a direct replacement without modification. Key construction details include: Fine tip iridium electrode – designed for consistent spark performanceCopper core design – supports heat dissipationCeramic resistor – helps in stable ignition performancePre-set spark gap (0.8 mm) – ready for installation The iridium electrode design is built to offer longer electrode life compared to conventional nickel plugs, while maintaining stable ignition performance over extended usage. Key Features Consistent ignition performance across different riding conditionsLonger electrode life compared to standard spark plugsStable engine response with reliable spark generationReduced electrode wear rate compared to conventional plugsAnti-fouling design characteristicsCompatible with BS4 and BS6 vehicles Technical Specifications Brand: NGKModel: CR8EAIX-9Type: Iridium IX Spark PlugCenter Electrode: Fine tip iridiumHeat Range: 8Thread Diameter: 10 mmThread Length: 19 mmHex Size: 16 mmSpark Gap: 0.8 mm Compatible Vehicles Yamaha Yamaha YZF-R15 (V1, V2, V3, V4)Yamaha MT-15Yamaha YZF-R3Yamaha MT-03Yamaha Aerox V2Yamaha NMax 155 Jawa JawaJawa Forty TwoJawa Bobber 42Jawa 350Jawa 42 FJ Yezdi Yezdi RoadsterYezdi AdventureYezdi Scrambler Warranty Disclaimer This product carries manufacturer warranty if applicable.Rawtorque does not provide any additional warranty beyond the manufacturer’s coverage.Please refer to our Warranty Policy for full details.

Read more less

Idemitsu IRG7 10W-40 Fully Synthetic Motorcycle Engine Oil Idemitsu IRG7 10W-40 is a fully synthetic motorcycle engine oil formulated for modern high-performance four-stroke engines. It is designed to excel under demanding riding conditions, ensuring consistent protection and performance. This oil is ideal for riders who own advanced motorcycles, including models like the royal enfield classic 350 and the bmw s1000rr. Advanced Protection with Septet Guard Technology The motor oil uses Idemitsu’s advanced Septet Guard Technology. This delivers seven ultra-protective advantages that enhance lubrication stability and clutch performance. Riders benefit from thermal protection across a wide operating range, making this product suitable for various riding environments. With stable lubrication, the oil helps maintain smooth engine operations and protects critical engine parts. It is a top choice for motorcycles requiring reliable and durable engine oils for extended use. Performance Under High Temperatures The formulation of this motorcycle engine oil is built to withstand high-temperature conditions. This feature is especially important for highway rides or aggressive riding styles where the engine works harder. The oil maintains viscosity stability, ensuring that it flows properly even under tough conditions. Whether you’re riding a royal enfield classic 350 on long trips or pushing the limits on a bmw s1000rr, this oil keeps your engine lubricated effectively. It prevents friction and wear while supporting consistent gear shift performance. JASO MA2 Certification for Wet Clutch Systems Idemitsu IRG7 10W-40 oil meets the JASO MA2 specification, making it perfect for motorcycles with wet clutches. This certification ensures controlled friction characteristics to avoid clutch slippage. Riders of both street and track motorcycles trust this oil for smooth and consistent clutch operation. The JASO MA2 rating is critical for machines like the royal enfield classic 350 and bmw s1000rr, where clutch precision affects overall performance. This engine oil balances power delivery and clutch feel exceptionally well. Engine Protection and Durability This IRG7 oil is targeted at riders who demand both engine protection and overall durability in a motorcycle engine oil. It offers a performance-oriented balance that supports smooth gear shifts and protects engine components. This balance ensures extended service intervals without compromising manufacturer standards. The oil’s synthetic base and specialized additives reduce wear and help prevent deposits. It keeps the engine clean and operating reliably, even in challenging riding conditions common to motorcycles like the royal enfield classic 350 or aggressive sportbikes like the bmw s1000rr. Meets Industry Specifications Idemitsu IRG7 10W-40 meets current API and JASO specifications as officially stated by the manufacturer. It is intended for use where a 10W-40 grade motorcycle engine oil is recommended. This ensures compatibility and compliance with various motorcycle models across different brands. By choosing this oil, riders ensure that their motorcycles receive protection that aligns with both global and manufacturer-specific standards. It is a trusted option for riders looking for premium synthetic motorcycle engine oil. Why Choose Idemitsu IRG7 10W-40? Fully synthetic formulation designed for maximum thermal stability. Advanced Septet Guard Technology for enhanced engine care. Stable viscosity for better performance in hot and demanding conditions. JASO MA2 certification supports motorcycles with wet clutch systems. Designed to protect and improve performance in motorcycles like royal enfield classic 350 and bmw s1000rr. Balances engine protection with fuel efficiency and smooth shifts. Suitable For a Variety of Motorcycles This versatile motorcycle engine oil is perfect for riders looking to keep their machines well lubricated and protected. It suits everyday motorcycles like the royal enfield classic 350 and high-performance models like the bmw s1000rr. Its formulation handles the needs of motorcycles requiring both durability and high performance. Choosing Idemitsu IRG7 10W-40 means investing in a motor oil that helps maintain engine health and maximizes riding pleasure.

Read more less

NGK CPR7EAIX-9 Iridium Spark Plug for Suzuki Gixxer 155, 250 & Intruder 155 The NGK CPR7EAIX-9 Iridium IX Spark Plug is engineered for riders who want sharper throttle response, improved combustion efficiency, and long-term ignition reliability on their Suzuki Gixxer and Intruder motorcycles. Designed with a fine tip Iridium center electrode, this spark plug delivers stronger spark concentration and improved flame propagation. The result is smoother acceleration, cleaner combustion, and consistent performance across daily city rides and highway runs. Built using a Copper Core and integrated Ceramic Resistor, the CPR7EAIX-9 ensures stable ignition while reducing electrical interference. Its heat range of 7 makes it suitable for maintaining balanced engine temperature under varied riding conditions. This plug is a direct-fit upgrade replacement for: Primary Search Fitment (Motorcycles): Suzuki Gixxer 155 Suzuki Gixxer SF 155 Suzuki Gixxer 250 Suzuki Gixxer SF 250 Suzuki Intruder 155 (BS6) These models benefit from improved ignition precision, especially during high-rev acceleration and sustained cruising. Technical Specifications: Center Electrode: Fine Tip Iridium Heat Range: 7 Hex Size: 16 mm Thread Diameter: 10 mm Thread Reach: 19 mm Spark Gap: 0.9 mm Built-in Resistor: Yes Performance Advantages Stronger Ignition SparkThe iridium tip requires lower voltage to ignite the air-fuel mixture, resulting in quicker starts and more responsive throttle feel. Improved Combustion EfficiencyBetter flame kernel development supports smoother power delivery and cleaner engine operation. Durability Under High RPM UseIridium is significantly harder than conventional electrode materials, offering extended service life compared to standard spark plugs. Stable Performance in Varied Riding ConditionsWhether in city traffic or highway cruising, consistent spark timing improves ride smoothness. Application List – NGK CPR7EAIX-9 Suzuki Motorcycle India Pvt. Ltd. Gixxer 155 (Standard) Gixxer SF 155 Gixxer 250 Gixxer SF 250 (BS6) Intruder 155 (BS6) Hero MotoCorp Ltd. Passion Pro X Glamour 125 BS6 Glamour Xtec 125 BS6 Super Splendor 125 BS6 Honda Motorcycle & Scooter India Pvt. Ltd. Dream CD 110 (Old) CD Dream 110 (Launch June 2020) CB Shine 125 CB Shine SP 125 CBF Stunner CB Twister Dream Yuga Dream Neo Livo 110 (Old & Launch June 2020) PCX 125 TVS Motor Company Ltd. Star City 110cc India Yamaha Motor Pvt. Ltd. Saluto 125cc Suzuki Motorcycle India Pvt. Ltd. (Scooter Segment) Access (selected variants – verify specification)

Read more less

NGK Iridium IX CR7EIX Spark Plug for Royal Enfield 411 & 650 Engines The NGK Iridium IX CR7EIX spark plug is an OEM-spec ignition component designed for select Royal Enfield petrol engines where the CR7EIX spark plug specification is recommended. Manufactured by NGK to its established iridium spark plug standards, this model is intended to provide consistent ignition performance and stable combustion under normal riding conditions. Spark plugs play a critical role in petrol engines by igniting the air–fuel mixture inside the combustion chamber. Correct ignition timing and spark stability are essential for dependable starting, smooth operation, and controlled combustion. The NGK CR7EIX is engineered to meet these requirements when installed in engines that specify this exact plug code. Iridium Spark Plug Construction Iridium spark plugs use a fine-wire iridium centre electrode, selected for its high melting point and resistance to electrode wear. Compared to conventional nickel spark plugs, iridium electrodes retain their shape and spark characteristics over extended operating periods. This helps maintain consistent ignition behaviour across repeated heat cycles and regular usage. The CR7EIX features a 0.6 mm fine-wire iridium centre electrode, which allows the spark to form precisely at the electrode tip. This design supports stable ignition without requiring changes to engine tuning, fuel delivery, or ignition mapping. The spark plug functions strictly as a like-for-like replacement component, not as a modification that alters engine behaviour. In addition to the iridium centre electrode, the spark plug incorporates NGK’s ceramic insulator and resistor construction. These elements are designed to provide electrical insulation, suppress electrical noise, and manage heat transfer during engine operation. The metal shell is plated to resist corrosion and support durability during installation and removal. Intended Application & Fitment The NGK CR7EIX spark plug is specified for select Royal Enfield engines across single- and twin-cylinder platforms, only where CR7EIX is listed as the recommended spark plug code in official service documentation. Confirmed applications include: Royal Enfield 411 cc Engine Himalayan 411 (BS3 / BS4 / BS6) Royal Enfield 650 cc Twin Engines Interceptor 650 (BS4 & BS6) Continental GT 650 (BS4 & BS6) Super Meteor 650 Compatibility applies strictly where CR7EIX is the specified spark plug. Vehicles using a different spark plug code should not use this model, even if engine displacement appears similar. OEM Specification & Usage Notes NGK spark plug codes define critical parameters such as thread size, reach, heat range, terminal configuration, and electrode design. Using the correct spark plug code is essential for maintaining proper combustion characteristics and preventing long-term engine issues. The CR7EIX is manufactured as an OEM-spec iridium spark plug, not as a universal performance upgrade. Substituting spark plugs with a different heat range or design may lead to improper combustion behaviour or accelerated wear. This spark plug does not alter: Engine output Compression ratio Fuel mapping Ignition timing Its role is to maintain reliable ignition performance in engines designed for this specification. Replacement & Service Considerations Spark plugs are routine service components and should be replaced according to the vehicle manufacturer’s recommended service intervals. While iridium spark plugs are generally designed for longer durability compared to conventional nickel plugs, actual service life depends on factors such as riding conditions, fuel quality, engine health, and maintenance practices. The NGK CR7EIX is supplied as a single spark plug. Royal Enfield engines may require multiple spark plugs depending on cylinder configuration. Buyers should confirm the required quantity before purchase. Installation should follow standard service procedures, including: Correct tightening torque Clean threads Proper seating Improper installation may affect ignition performance or cause damage. Summary The NGK Iridium IX CR7EIX spark plug is a high-quality OEM-spec ignition component intended for select Royal Enfield 411 cc and 650 cc petrol engines. Built with a fine-wire iridium centre electrode and NGK’s proven construction standards, it is designed to provide consistent ignition and dependable combustion when used in engines that specify the CR7EIX code. Correct application and compatibility verification are essential before installation.

Read more less

Precision-Built Iridium IX Spark Plug for Honda CB350 Platform The NGK CPR8EAIX-9 Iridium IX spark plug is specified for Honda’s 350cc platform, including the H’ness CB350 and CB350RS. Built with NGK’s fine-wire iridium electrode design, this plug is engineered to deliver consistent ignition performance under standard riding conditions. At the core is a 0.6 mm iridium centre electrode, designed to maintain stable spark characteristics across repeated heat cycles. Compared to conventional nickel plugs, iridium construction helps retain electrode shape over time, supporting consistent combustion behaviour during regular use. What This Means in Real Riding Conditions In practical terms, a stable spark contributes to: Smoother idle characteristics Cleaner combustion cycles Predictable throttle response These are not performance modifications, but refinements in how the engine operates within its designed parameters. Built for Daily Use, Not Just Specs Sheets The CB350 platform is known for refinement-focused riding. This plug aligns with that intent: Maintains ignition consistency in city traffic and touring conditions Designed to resist carbon fouling under normal usage Handles temperature variation during stop-go and highway riding It’s a reliability-focused component — not a tuning part. Specification-Driven Fitment This spark plug should only be used where CPR8EAIX-9 is specified by Honda. Confirmed Fitment: Honda H’ness CB350 Honda CB350RS Compatibility is strictly based on spark plug specification — not engine size similarity. 🔧 Additional Compatibility (Specification-Based) The NGK CPR8EAIX-9 spark plug is used across multiple motorcycles where this exact specification is required. Honda H’ness CB350 CB350RS Hornet 160R / Hornet 2.0 Unicorn 150 / 160 X-Blade CB Trigger SP Shine 125 Hero MotoCorp Xpulse 200 / 200T Xtreme 160R / 200S / 200R Impulse Bajaj Pulsar NS200 / RS200 / AS200 (Side Plug) Dominar 400 (Side Plug) Pulsar 150 / 180 / 220 TVS Raider 125 Jupiter / Zest / Wego Yamaha FZ V3 / FZS V3 Aprilia SR125 / SR160 / SXR160 Technical Highlights Fine-wire Iridium Centre Electrode (0.6 mm) Resistor Type Plug (EMI suppression) Heat Range: 8 Thread Diameter: 10 mm Thread Reach: 19 mm Hex Size: 16 mm Service & Usage Notes Sold as a single unit Install using correct torque specifications Replace as per manufacturer service interval Iridium plugs are designed for extended durability, but actual lifespan depends on: Fuel quality Riding conditions Engine health Summary The NGK CPR8EAIX-9 is a specification-correct iridium spark plug for Honda’s 350cc platform. It focuses on consistent ignition, durability, and stable combustion, aligning with the refinement characteristics of the CB350 engine.

Read more less