Mototorque Motorcycle Accessories

Radiator Guard MS for TVS Apache RTX 300, Front Cooling Protection Accessory The Mototorque Radiator Guard MS for TVS Apache RTX 300 is engineered to provide protective coverage to the motorcycle’s radiator assembly. Designed specifically for the TVS Apache RTX 300, this guard is constructed from mild steel (MS) and precisely shaped to shield the radiator surface from road debris, stones, and other impacts that can occur during everyday riding or long-distance touring. The radiator plays a critical role in regulating engine temperature by maintaining consistent airflow over cooling fins. Positioned at the front of the motorcycle, it remains vulnerable to impacts from flying gravel, loose stones, and debris kicked up by other vehicles or rough terrains. Even minor surface damage to radiator fins can disrupt airflow and cooling performance. A radiator guard introduces a protective external barrier, helping reduce direct contact from such hazards without significantly affecting airflow when installed correctly. This radiator guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures precise alignment with the radiator frame and mounting points, providing structural integrity and preventing interference with normal cooling flow when installed properly. Designed Specifically for TVS Apache RTX 300 This is not a universal accessory. It is developed around the specific fitment requirements of the TVS Apache RTX 300’s radiator assembly to ensure: • Exact alignment with stock mounting points• Maximum airflow with protection intact• No obstruction to cooling fins when installed correctly• Compatibility with original radiator geometry Accurate fitment is essential when installing cooling protection accessories. A guard that disrupts airflow or misaligns with the radiator can reduce cooling effectiveness rather than enhance protection. Functional Protection for Daily Riding and Touring Motorcycles operate in diverse environments where road conditions vary from smooth highways to gravel paths and city roads with debris. The radiator’s vulnerable position makes it susceptible to flying projectiles and surface particles. A radiator guard helps deflect loose stones and airborne debris, reducing the risk of direct damage to the delicate cooling fins. This radiator guard helps: • Minimize direct stone impact on radiator surface• Shield radiator fins from debris contact• Maintain air circulation for effective heat dissipation• Provide reliable front-end cooling protection Protection accessories such as this are focused on reducing exposure to everyday hazards. It is important to understand scope: this guard does not prevent damage during severe collisions or high-impact crashes. Instead, it provides a preparatory barrier that supports component longevity. Mild Steel Construction and Durability The guard is constructed from mild steel, chosen for its strength and ability to withstand impact from road debris while maintaining structural stability. Mild steel is: • Durable under real-world riding conditions• Resistant to deformation from minor impacts• Suitable for protective applications• Compatible with powder-coated finishes to resist corrosion The material choice ensures that the guard remains stable under forward airflow and extended use without compromising its protective function. Practical Use Case This radiator guard is suitable for: • Daily commuters• Highway riders• Long-distance touring riders• Mixed-surface riding conditions Protecting the cooling system contributes to maintaining consistent engine temperature regulation, which supports engine performance and longevity. Installation and Fitment Professional installation is recommended to ensure that the guard sits securely and aligns with the existing radiator frame mounting points. Proper installation helps prevent vibration or movement that could reduce effectiveness over time. Since this radiator guard is designed specifically for the TVS Apache RTX 300, installation aligns with factory configuration when mounted as intended. Build and Application • Designed for: TVS Apache RTX 300• Material: Mild Steel (MS)• Application: Radiator protection accessory This accessory integrates into the front cooling assembly without altering airflow when installed correctly. Warranty • 6 Months Warranty on mild steel radiator guard and powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Built for riders who want dependable protection without compromising the motorcycle's styling, the Moto Torque Crash Guard V2.0 is engineered specifically for the Honda CB350 RS. Manufactured using high-strength mild steel tubing and precision fabrication techniques, this crash guard is designed to help protect critical motorcycle components during low-speed drops and accidental tip-overs while maintaining a clean, integrated appearance. Its vehicle-specific design follows the lines of the CB350 RS, offering protection without looking bulky or out of place. Key Features Premium Steel Construction Manufactured using 25.4 mm mild steel tubing Strong and durable construction for daily use Designed to withstand impacts during accidental falls Precision welded for structural integrity Durable Surface Finish Shot-blasted surface preparation Powder-coated finish for corrosion resistance Uniform and long-lasting coating quality Motorcycle-Specific Design Developed exclusively for Honda CB350 RS Clean integrated appearance Does not interfere with normal riding ergonomics Helps protect engine and side sections during minor impacts Strong Mounting System Multiple mounting points for improved stability Secure fitment design DIY-friendly installation Protection Where It Matters The Crash Guard V2.0 is designed to provide an additional layer of protection to critical motorcycle components, helping reduce potential damage during parking mishaps, low-speed falls and tip-over situations. Package Contents 1 × Moto Torque Crash Guard V2.0 Complete Mounting Hardware Installation Guide Installation Tools Required Allen Key, 4 mm & 6 mm Spanner, 13 mm Fitment Comes with DIY installation guidance. Professional installation is recommended for best results. Important Note Compatible only with Honda CB350 RS. Product images are for representation purposes only. Minor variations in finish may occur due to manufacturing processes. Periodically inspect all mounting hardware and tighten if necessary.

Read more less

Better Ergonomics. Better Control. The Moto Torque Handlebar Riser for Guerrilla 450 is engineered for riders who want improved comfort without compromising control or handling feel. By increasing the handlebar height by approximately 1 inch, the riser reduces wrist pressure, improves upper-body posture, and creates a more relaxed riding experience during city commutes and long-distance touring. Precision-machined for direct fitment on the Royal Enfield Guerrilla 450, this riser integrates cleanly with the stock handlebar setup while maintaining a factory-style appearance. Whether you're navigating traffic, cruising highways, or riding longer weekend routes, the raised handlebar position helps reduce fatigue and improves overall rider comfort. Key Features Approximate 1-inch handlebar rise Improved upright riding posture Reduces wrist and shoulder fatigue Better comfort for touring and daily rides Direct bolt-on fitment Maintains factory-style cockpit feel Clean black finish for OEM-like appearance Compatible with stock handlebar setup

Read more less

Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300, Beak-Compatible Design The Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 is designed to provide structural protection while maintaining compatibility with the motorcycle’s front-end design, including beak setups. Built using mild steel constructionthe crash guard is intended to offer support around key impact areas such as the engine and lower frame. The design integrates multiple slider pointspositioned to help manage contact during low-speed falls or tip-overs. The Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 is developed for direct fitment, aligning with the motorcycle’s mounting points without requiring modification. Key design highlights include: Beak-compatible structureaccommodates the RTX 300 front designMulti-point mounting layoutdistributes load across mounting areasIntegrated sliderspositioned to reduce direct impact transferPowder-coated black finishfor surface protection and finish durability This crash guard is intended for riders looking to add a protection layer without altering the overall stance or design of the motorcycle. Specifications Brand: Moto TorqueProduct Type: Crash GuardCompatibility: TVS Apache RTX 300Material: Mild SteelFinish: Black (Powder Coated)Installation: Direct Fit (Bolt-on)Design: Beak-Compatible with integrated sliders

Read more less

TVS Apache RTX 300 Stallion Pro Crash Guard Red, Mototorque Product Description The TVS Apache RTX 300 Stallion Pro Crash Guard Red from Moto Torque is designed specifically for the TVS Apache RTX 300. This crash guard is developed as a model-specific protection accessory, engineered to align with the RTX 300 chassis. Constructed from heavy-duty mild steelthe guard is built with a four-point mounting structure. The layout is intended to distribute impact forces across mounting points during tip-over scenarios. The unit includes impact-absorbing sliderspositioned to create spacing between the motorcycle body and the ground surface. The TVS Apache RTX 300 Stallion Pro Crash Guard Red features a black-compatible precision fitment design tailored exclusively for the RTX 300 platform. It is finished in Red powder coatingforming a corrosion-resistant surface layer. The design integrates with the frame geometry of the TVS Apache RTX 300 without requiring structural modifications. This crash guard is positioned as a direct-fit protection solution for riders seeking engine and lower frame coverage on the TVS Apache RTX 300. Warranty Disclaimer This product includes a 6-month manufacturer warranty and a lifetime warranty on stainless steel nuts and bolts, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Mototorque Product Type: Crash Guard Motorcycle Compatibility: TVS Apache RTX 300 Material: Mild Steel Finish: Red Powder-Coated Mounting Type: Four-Point Mounting Sliders: Impact-Absorbing Sliders Included Warranty: 6 Months Manufacturer Warranty Hardware Warranty: Lifetime on Stainless Steel Nuts and Bolts

Read more less

TVS Apache RTX 300 Stallion Pro Crash Guard White, MotoTorque Product Description The TVS Apache RTX 300 Stallion Pro Crash Guard White from Moto Torque is designed specifically for the TVS Apache RTX 300. This crash guard is developed as a model-specific protection accessory, engineered to align with the RTX 300 chassis. Constructed from heavy-duty mild steelthe guard is built with a four-point mounting structure. The layout is intended to distribute impact forces across mounting points during tip-over scenarios. The unit includes impact-absorbing sliderspositioned to create spacing between the motorcycle body and the ground surface. The TVS Apache RTX 300 Stallion Pro Crash Guard White features a black-compatible precision fitment design tailored exclusively for the RTX 300 platform. It is finished in white powder coatingforming a corrosion-resistant surface layer. The design integrates with the frame geometry of the TVS Apache RTX 300 without requiring structural modifications. This crash guard is positioned as a direct-fit protection solution for riders seeking engine and lower frame coverage on the TVS Apache RTX 300. Warranty Disclaimer This product includes a 6-month manufacturer warranty and a lifetime warranty on stainless steel nuts and bolts, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: MotoTorque Product Type: Crash Guard Motorcycle Compatibility: TVS Apache RTX 300 Material: Mild Steel Finish: White Powder-Coated Mounting Type: Four-Point Mounting Sliders: Impact-Absorbing Sliders Included Warranty: 6 Months Manufacturer Warranty Hardware Warranty: Lifetime on Stainless Steel Nuts and Bolts

Read more less

The Moto Torque Back Carrier is designed for the Honda CB200X and is also stated as compatible with the Honda NX200. This listing is structured primarily for CB200X search visibility. It provides a rear-mounted platform intended for carrying luggage, top boxes, or essential touring cargo. This is not a universal carrier. Model Compatibility Designed for Honda CB200X Also stated compatible with Honda NX200 Tailor-made fitment aligned with factory mounting points Compatibility beyond these two models is not mentioned. Material & Construction Built from Mild Steel Designed for structural durability Finished with powder coating for corrosion resistance and surface protection The construction is intended to provide stable luggage support during everyday riding and touring use. Load Capacity Load capacity: 8-7 kg (as stated in listing) Load must be evenly distributed. Exceeding recommended weight may affect balance and handling. Installation Bolt-on installation Designed for quick fitment No modifications required (as stated) Proper torque settings and alignment are recommended during installation. Intended Use Suitable for: Top boxes Soft luggage Touring essentials Daily riding cargo needs Designed to provide a stable rear mounting platform without compromising balance when used within specified load limits. Design Profile Sleek and minimal structure Designed to complement the Honda CB200X adventure styling Structured rear integration Product Specifications Brand: Moto Torque Product Type: Back Carrier Motorcycle Compatibility: Honda CB200X, Honda NX200 Material: Mild Steel Finish: Powder Coated Load Capacity: 7-8 kg Installation Type: Bolt-on

Read more less

The Moto Torque Badger Engine Guard is designed specifically for the Suzuki V-Strom SX 250offering extended lower engine coverage and structural protection for underside components. This is a model-specific engine guard and is not designed for universal fitment. Model-Specific Fitment, Suzuki V-Strom SX 250 Designed exclusively for V-Strom SX 250 Structured to integrate with factory mounting geometry Engineered to provide maximum coverage under the engine area Compatibility beyond the Suzuki V-Strom SX 250 is not stated. Material & Construction Made from Cold Rolled (CR) Mild Steel 2.0 mm thickness Clamps in 3 mm thickness for added strength CNC laser cut for precision finish MIG welding used for structural joints Cold rolled sheets are used as per manufacturer description to provide durability and impact resistance. Oil Drain Access Dedicated oil drain space provided No need to remove the engine guard during engine oil draining (as stated) This allows maintenance access without full guard removal. Surface Treatment & Finish Grit blasting process used prior to coating Powder-coated finish Designed for uniform finish and corrosion resistance Mounting Hardware Comes with Stainless Steel 304 grade nuts and bolts Lifetime warranty on nuts and bolts (as per manufacturer) Stainless steel hardware supports corrosion resistance and long-term durability. Tools Required for Installation Allen key, 8 & 6 Bit and rod, 17 no. Includes DIY fitment guide. Professional installation is recommended to ensure correct torque and alignment. Intended Use Suitable for: Adventure touring Mixed terrain riding Riders seeking extended underside engine protection Scope clarification: This engine guard is intended to reduce exposure to impacts from debris, uneven terrain, and low to moderate impact situations. It is not designed to prevent damage in high-speed collisions. Product Specifications Brand: Moto Torque Product Name: Badger Engine Guard Motorcycle Compatibility: Suzuki V-Strom SX 250 Material: Cold Rolled Mild Steel Sheet Thickness: 2.0 mm Clamp Thickness: 3 mm Manufacturing: CNC Laser Cut & MIG Welded Finish: Powder Coated Hardware: Stainless Steel 304 nuts & bolts

Read more less

Moto Torque Stage II Air Filter Combo Kit for Interceptor 650, Continental GT 650 & Bear 650 The Moto Torque Air Filter Stage II Combo Kit is designed exclusively for Royal Enfield Interceptor 650, Continental GT 650, and Bear 650 motorcycles. This combo package integrates the Moto Torque Performance Air Filter with the Stage II upgrade kit to deliver enhanced airflow, sharper throttle response, and smoother acceleration. Engineered specifically for the Royal Enfield 650 twin-cylinder platform, this kit is built to improve intake efficiency while maintaining durability and precision fitment. Designed for Royal Enfield 650 Twin Platform • Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Bear 650• Precision engineered for RE 650 twin-cylinder engines Model-specific compatibility ensures correct alignment and plug-and-play installation. Complete Performance Package • Includes Performance Air Filter• Includes Stage II upgrade kit• Integrated high-flow intake solution This bundled system is structured to optimize airflow while supporting consistent engine performance. Engineered Features Stainless Steel ConstructionCorrosion-resistant structure built for long-term durability. Enhanced AirflowImproved intake efficiency supports stronger and smoother power delivery. Precision FitDesigned specifically for Royal Enfield 650 twins and Bear 650 platform. Easy InstallationPlug-and-play design for straightforward installation. Performance Benefits • Sharper throttle response• Smoother acceleration• Optimized airflow delivery• Long-lasting structural durability Designed to complement the performance characteristics of the 650cc twin engine. Specifications • Brand: Moto Torque• Product Type: Stage II Air Filter Combo Kit• Compatibility: Interceptor 650 / Continental GT 650 / Bear 650• Construction: Stainless Steel + High-flow Filter• Installation: Plug-and-Play

Read more less

Moto Torque Air Filter for Royal Enfield Himalayan 450 and Guerrilla 450 The Moto Torque Performance Air Filter is engineered specifically for Royal Enfield Himalayan 450 and Royal Enfield Guerrilla 450 motorcycles. Designed for the Royal Enfield 450cc evolution platform, this air filter enhances airflow while maintaining strong filtration integrity for consistent engine performance. Built to handle both adventure touring and street riding demands, the filter supports optimized intake flow, improved combustion efficiency, and long-term engine protection across varied riding conditions. Designed for Royal Enfield 450 Platform • Royal Enfield Himalayan 450• Royal Enfield Guerrilla 450• 450cc single-cylinder engine compatibility• Model-specific precision fitment Ensures proper sealing and alignment within the stock airbox system. Engineered Features 4-Layer High-Flow Cotton GauzeConstructed with four layers of high-flow cotton gauze to deliver increased air intake without compromising filtration. Supports strong combustion and consistent power delivery. Multi-Stage Filtration EfficiencyCaptures fine dust, dirt, and airborne contaminants while maintaining unrestricted airflow. Suitable for dusty trails, off-road terrain, and city traffic. Reusable & Serviceable DesignWashable, re-oilable, and reusable construction reduces replacement frequency and supports eco-friendly maintenance. Heat-Resistant & Structurally ReinforcedEngineered to withstand elevated temperatures and vibration typical of the 450cc single-cylinder platform. Enhanced Throttle Response & EfficiencyReduced intake resistance supports sharper throttle feel, cleaner combustion, and improved fuel economy. Performance Profile by Motorcycle Royal Enfield Himalayan 450Optimized for adventure touring, delivering reliable torque and endurance across rugged terrain. Royal Enfield Guerrilla 450Tuned for agile street performance, supporting responsive acceleration and smooth power delivery. Specifications • Brand: Moto Torque• Product Type: Performance Air Filter• Compatibility: Himalayan 450 / Guerrilla 450• Construction: 4-Layer Cotton Gauze• Design: Reusable & Serviceable• Engine Type: 450cc Single-Cylinder

Read more less

The Moto Torque Himalayan 450 Saddle Stay is designed specifically for the Royal Enfield Himalayan 450 to provide structured support for saddle bags during touring and daily riding. Built using rigid mild steel tubing, this saddle stay is engineered to carry luggage weight while maintaining the motorcycle’s balance. Designed to support saddle bags without interfering with the riding dynamics, the structure focuses on strength, stability, and precise fitment for the Himalayan 450 platform. Made for Royal Enfield Himalayan 450 This saddle stay is manufactured exclusively for the Royal Enfield Himalayan 450 to ensure: • Proper structural alignment• Secure mounting compatibility• Stable integration with the rear frame• Model-specific geometry fitment Material & Construction • Rigid Mild Steel, 19mm diameter tubes• Wall thickness: 1.6mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel enhances rigidity and resistance against abrasion during riding. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Grid blasting before powder coating for uniform finish• Automated CNC tube bending for precision formation These processes contribute to structural strength and finishing consistency. Functional Design • Designed to support saddle bags during adventure touring• Maintains bike balance while carrying luggage• Lower stays that carry saddle bag weight are removable• Can be installed or removed according to rider requirements The structure is built to provide luggage support without affecting handling dynamics. Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on bolts & nuts Tools Required for Installation • Allen Key, 5 & 6mm• Spanner, 10 & 13 No. Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Tube Diameter: 19mm• Wall Thickness: 1.6mm• Material: Cold Rolled Mild Steel• Welding: MIG & TIG• Fasteners: Stainless Steel 304

Read more less

Front Master Cylinder Guard for TVS Apache RTX 300, Brake System Protection The Mototorque Front Master Cylinder Guard for TVS Apache RTX 300 is engineered to provide protective coverage to the motorcycle’s front brake master cylinder assembly. Designed specifically for the TVS Apache RTX 300, this guard is fabricated from premium stainless steelbuilt to shield the front brake master cylinder from stones, debris, and accidental impacts encountered during daily riding or touring conditions. The brake master cylinder is a key component of the braking system that houses hydraulic mechanisms responsible for transferring rider input into braking power. Positioned high on the cockpit area, it remains exposed to external elements and accidental knocks. Even minor impacts can cause surface damage or cosmetic wear, potentially leading to more significant long-term issues. A master cylinder guard introduces a protective frame around the exposed area, helping reduce direct impact exposure while preserving brake functionality. This guard is engineered exclusively for the TVS Apache RTX 300. Model-specific design ensures that it aligns precisely with the original brake master cylinder and handlebar configuration. Proper fitment ensures that the guard provides protection without interfering with brake lever movement or control mechanism function, preserving safety and operational reliability. Designed Specifically for TVS Apache RTX 300 This is not a one-size-fits-all accessory. The Front Master Cylinder Guard for TVS Apache RTX 300 is crafted around the unique mounting points and spatial configuration of this model’s front assembly, ensuring: • Precise alignment with stock brake master cylinder position• No interference with brake lever or control cables• Maintained clearance for ergonomic control• Seamless integration with factory layout when installed properly Accurate fitment is critical for components positioned near control systems because even minor misalignment can affect usability or rider confidence. Stainless Steel Construction and Durability This guard is constructed from stainless steelchosen for its corrosion resistance, strength, and endurance in demanding riding environments. Stainless steel resists rust and wear, which is especially important for components located near exposed filter and brake systems where water, dust, and road grit can accelerate wear. Stainless steel construction offers: • Resilience against corrosion and environmental exposure• Reliability under varied riding conditions• Structural integrity that resists deformation• Long-lasting performance with minimal maintenance This makes the guard not only protective but durable over repeated ride scenarios. Functional Protection in Real-World Conditions Motorcycles encounter various riding conditions where loose gravel, stones, and airborne debris can strike components directly. The front brake master cylinder is one of the exposed areas in such scenarios. A guard helps: • Reduce direct contact with loose road debris• Provide a protective buffer for sensitive brake components• Preserve exterior finish and structural surfaces• Output stable performance even in dusty or wet conditions Protective guards help maintain component condition, which in turn supports overall system longevity and reliability. It is important to define scope: this guard is intended to protect against minor surface impacts and debris contact. It does not replace routine brake maintenance or alter brake system performance characteristics. Practical Use Case This guard is suitable for: • Daily commuters navigating mixed road conditions• Touring riders covering highways and rural routes• Riders seeking enhanced protection for brake components• Owners focused on long-term component condition preservation Protecting the brake master cylinder helps keep critical controls operating smoothly and looking tidy despite constant environmental exposure. Installation and Fitment Professional installation is recommended to ensure proper alignment and secure mounting. Since this guard is designed specifically for the TVS Apache RTX 300, installation aligns with the factory handlebar and brake system layout when mounted as intended. Warranty • Lifetime Warranty on stainless steel guard and stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Handle Bar Riser for TVS Apache RTX 300, Upright Riding Position & Ergonomic Control The Mototorque Handle Bar Riser for TVS Apache RTX 300 is engineered to elevate the motorcycle’s handlebar height, offering riders a more upright riding stance and improved ergonomic comfort for long rides, city traffic, and touring use. Designed exclusively for the TVS Apache RTX 300, this handle bar riser integrates precisely with existing handlebar clamps to deliver enhanced control without compromising structural stability when installed correctly. The stock handlebar height on many motorcycles is a compromise between aggressive sport posture and everyday usability. For riders looking to reduce forward lean, improve wrist comfort, and gain a more commanding riding position, especially on extended trips or rough roads, a handle bar riser offers a focused solution. This handle bar riser is compatible specifically with the TVS Apache RTX 300. Engineered to fit the handlebar assembly and clamp structure of this model, it maintains compatibility with brake, clutch, throttle, and switchgear systems when mounted properly. Designed Specifically for TVS Apache RTX 300 This is not a universal accessory. The handle bar riser is modeled around the TVS Apache RTX 300’s cockpit geometry to ensure: • Correct alignment with factory handlebar clamps• Adequate clearance for cables and controls• Stable elevation without function interference• No modification to stock wiring or controls when installed properly A model-specific design ensures that the riser supports ergonomic improvement without introducing unintended handling issues. Functional Benefits of the Riser The purpose of a handle bar riser is to adjust the rider’s posture for better comfort and control. By slightly lifting the handlebar height, the rider’s torso angle becomes more upright. This shift offers several practical advantages: • Reduced wrist pressure during long rides• Improved upper body comfort• Better visibility in traffic and touring conditions• Enhanced maneuverability at low speeds Riders who frequently cover longer distances or navigate city traffic can benefit from the adjusted posture without compromising confidence in control. It is important to define scope clearly. A handle bar riser adjusts ergonomic posture and control feel. It does not increase power, alter suspension dynamics, or modify the motorcycle’s handling character beyond rider posture adjustments. Build, Integration & Stability The handle bar riser kit is built with structural rigidity in mind. When installed, it positions the handlebar at a slightly elevated level while securing it within the factory clamp area. Key structural characteristics include: • Stable mounting• Maintained control cable routing• Compatibility with TVS Apache RTX 300 factory controls• Secure elevation of the handlebar assembly Correct installation ensures consistent stability and eliminates unwanted vibration that can arise from improper setup.Finish: Black (as shown in product images) Real-World Use Scenarios This handle bar riser is suited for: • Touring riders seeking a relaxed posture• City commuters covering extended traffic periods• Riders who prefer reduced forward lean• Owners customizing cockpit ergonomics Ergonomic control improvements can change the riding experience significantly, especially over longer distances or during multi-day trips. Installation and Fitment Professional installation is recommended to ensure secure torque settings and proper alignment. Components mounted near the steering assembly must be installed accurately to avoid unintended movement during operation. Since this handle bar riser is designed specifically for the TVS Apache RTX 300, installation aligns with the factory mounting geometry when mounted properly. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Foot Rest for TVS Apache RTX 300, Rear Passenger Support and Stability The Mototorque Foot Rest for TVS Apache RTX 300 is designed to provide secure and stable foot placement for the pillion rider. Built specifically for the TVS Apache RTX 300, this foot rest integrates with the motorcycle’s rear mounting structure to support passenger comfort and balance during everyday riding and touring conditions. Passenger ergonomics play a direct role in ride stability and overall comfort. A properly positioned foot rest ensures that the pillion rider maintains steady posture, especially during acceleration, braking, and cornering. Without adequate foot support, passenger movement can affect balance and riding dynamics. This foot rest is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures alignment with factory mounting points and maintains proper spacing relative to the motorcycle’s frame and exhaust area when installed correctly. Designed Specifically for TVS Apache RTX 300 This is not a universal fit accessory. It is structured around the rear geometry of the TVS Apache RTX 300 to ensure: • Proper alignment with stock mounting points• Stable passenger foot positioning• Maintained ground clearance profile• Integration with factory rear structure Correct fitment ensures that passenger comfort is improved without interfering with rider control or structural balance. Functional Support for Passenger Riding A foot rest serves a practical purpose beyond comfort. It contributes to: • Improved passenger stability• Reduced unwanted movement during riding• Better weight distribution• Controlled posture during braking and acceleration For motorcycles used frequently with a pillion rider, stable rear foot support is an essential ergonomic component. It is important to define scope clearly. This accessory is designed to provide passenger foot support and stability. It does not alter suspension characteristics or increase load rating beyond manufacturer recommendations. Practical Use Cases This foot rest suits: • Daily commuters riding with a passenger• Touring riders covering long distances with pillion• Riders seeking secure passenger ergonomics• Owners replacing or upgrading stock foot rests A stable rear foot platform enhances ride confidence for both rider and passenger. Build and Application • Designed for: TVS Apache RTX 300• Application: Rear passenger foot support The foot rest integrates into the rear mounting area while preserving factory ergonomics when installed properly. Installation Considerations Professional installation is recommended to ensure secure alignment and correct torque settings. Passenger support accessories must be mounted firmly to avoid movement during riding. Since this foot rest is designed specifically for the TVS Apache RTX 300, installation aligns with factory mounting geometry when installed correctly. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

White Crash Guard for TVS Apache RTX 300, Frame and Engine Protection The Mototorque Crash Guard White for TVS Apache RTX 300 is designed to provide structural protection to the motorcycle’s engine and lower frame area during minor falls or impact situations. Built specifically for the TVS Apache RTX 300, this crash guard integrates with the motorcycle’s chassis structure to deliver reinforced side protection while maintaining functional compatibility. A crash guard serves as a protective barrier between the motorcycle’s core components and the ground in case of a tip-over or low-speed fall. The engine casing and lower frame are vulnerable areas during such situations. Direct contact can result in scratches, dents, or structural damage. A crash guard introduces a rigid external frame that absorbs initial impact and helps reduce direct stress on critical components. This white-finished crash guard is engineered exclusively for the TVS Apache RTX 300. Model-specific design ensures alignment with factory mounting points and maintains structural balance when installed correctly. Precision fitment matters because improper installation or incompatible guards can affect ride stability or cause unwanted vibration. Designed Specifically for TVS Apache RTX 300 This crash guard is not universal. It is structured around the chassis dimensions and mounting configuration of the TVS Apache RTX 300. Key integration advantages include: • Alignment with stock frame mounting points• Designed to maintain ground clearance profile• Structured positioning around engine casing• Compatible with factory geometry when installed properly Model-dedicated fitment ensures that protection does not interfere with normal riding ergonomics. Structural Protection for Everyday Riding Motorcycles can experience low-speed drops during parking, tight maneuvering, or uneven surface riding. In such cases, the first point of contact often determines the extent of damage. A crash guard helps distribute impact force across its structure rather than allowing direct contact with the engine casing. This crash guard helps: • Reduce direct engine casing exposure during tip-overs• Protect lower frame sections• Add structural reinforcement to the side profile• Provide added confidence during daily riding It is important to clarify scope. A crash guard is designed to reduce damage during minor falls or low-impact situations. It is not intended to eliminate damage during high-speed collisions or major accidents. White Finish, Functional with Visual Presence The white finish adds a distinctive contrast to the TVS Apache RTX 300’s profile. Protective accessories can also serve as styling elements when integrated cleanly into the motorcycle’s structure. For riders who prefer a visible protective framework rather than concealed protection, a white crash guard provides both structural and aesthetic presence. It enhances the visual stance while retaining functional purpose. Practical Use Case This crash guard suits: • Daily commuters navigating urban environments• Riders parking frequently in tight spaces• Touring riders covering mixed terrain• Owners seeking structural engine-side protection Protection accessories should balance durability and integration. This crash guard is intended to work alongside the factory structure without requiring structural modification when installed properly. Installation and Fitment Professional installation is recommended to ensure proper torque and alignment. Structural accessories must be securely mounted to perform effectively. Proper installation helps maintain balance and minimizes vibration. Since this crash guard is designed specifically for the TVS Apache RTX 300, it aligns with factory mounting geometry under correct installation procedures. Build and Application • Designed for: TVS Apache RTX 300• Application: Engine and frame side protection• Finish: White This accessory integrates into the lower chassis area while preserving the motorcycle’s intended structure.Configuration Note:This model is equipped with standard integrated sliders. The slider assembly in this version does not include a beak extension. Customers seeking a beak-style slider design should verify compatibility before placing an order. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

A crash guard is the first upgrade most owners look for on the TVS Apache RTX 300, and the Mototorque Engine Guard is built for exactly that. The mild-steel tubular frame shields the engine and tank shrouds in slow-speed tips and parking-lot drops, with mounting guidance available if you are unsure about fitment. Engine Guard MS for TVS Apache RTX 300, Mild Steel Engine Protection The Mototorque Engine Guard MS for TVS Apache RTX 300 is designed specifically to protect the engine area of the Apache RTX 300 from road debris, minor impacts, and everyday riding hazards. Built from mild steel (MS) and finished with powder coating, this guard adds a protective barrier without altering the motorcycle’s intended structure. For riders of the TVS Apache RTX 300, the engine area remains one of the most exposed mechanical zones. Stones, gravel, loose debris, and uneven terrain can lead to surface damage or unwanted wear over time. This engine guard acts as a structural shield, reducing direct exposure and helping maintain the integrity of critical components. This is not a universal guard. It is engineered exclusively for the TVS Apache RTX 300, ensuring model-specific mounting alignment and proper positioning. Precision in fitment matters because poorly aligned accessories can cause vibration, rattling, or interference with factory components. A model-dedicated guard avoids those issues by integrating with the bike’s original mounting geometry. Constructed using mild steel, the guard prioritizes durability and strength. Mild steel is commonly used in protective motorcycle accessories because of its ability to absorb impact without cracking under typical riding stresses. It provides structural resistance suitable for everyday commuting and touring conditions. The powder-coated finish enhances resistance against corrosion and environmental exposure, contributing to longer surface life compared to untreated metal. This engine guard is intended for riders who: • Commute daily on mixed road conditions• Ride through gravel, broken roads, or mild trail sections• Tour long distances where debris impact is common• Prefer structural engine area protection without unnecessary complexity Protection accessories should remain functional first. This guard does not claim performance enhancement or weight reduction. Its purpose is mechanical shielding and surface protection for the engine area of the TVS Apache RTX 300. Installation is designed around the Apache RTX 300’s frame structure. As with any structural accessory, professional installation is recommended to ensure correct torque settings and proper alignment. Proper fitment ensures stability and reduces the chance of unwanted vibration over time. Build and Finish • Material: Mild Steel (MS)• Finish: Powder-coated surface• Model Compatibility: TVS Apache RTX 300 The powder coating provides a protective layer over the steel surface. This helps resist rust formation caused by water exposure, humidity, or general riding environments. While no coating is permanent against extreme conditions, proper maintenance and cleaning will extend its lifespan. Practical Riding Value Engine casing damage is often cosmetic at first, chipped paint, minor dents, scratches. But consistent exposure without protection can escalate into deeper wear. An engine guard acts as a buffer zone. Instead of debris directly striking the engine casing, the impact is absorbed by the guard structure. For touring riders or those who encounter unpredictable road surfaces, that added layer of protection reduces risk and repair costs. It also contributes to maintaining resale value by preserving the condition of visible engine components. This product focuses on structural protection. It does not modify performance characteristics, does not alter engine tuning, and does not change the riding geometry of the motorcycle. Warranty Information • 6 months warranty on powder coating finish• Lifetime warranty on stainless steel nuts and bolts Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms, claim process, and policy details, please refer to our official warranty policy page.

Read more less

Protection Where It Matters Most The Moto Torque Radiator Guard for Yamaha XSR 155 is designed to shield the radiator from stones, debris, and road hazards while maintaining optimal airflow for engine cooling. 🛡️ Core Protection Upgrade Protects radiator fins from stone hits and debris Reduces risk of costly radiator damage Ideal for city, highway, and rough road riding 🌬️ Airflow-Optimized Design Honeycomb mesh pattern balances protection and airflow Ensures efficient cooling performance Does not restrict radiator efficiency under normal riding conditions 🏗️ Stainless Steel Construction Built using corrosion-resistant stainless steel Strong, durable, and long-lasting Suitable for all-weather riding conditions 🎯 Bike-Specific Fitment Designed specifically for Yamaha XSR 155 Precise fit without modification Maintains clean, integrated look 🛠️ Easy Installation Bolt-on installation Mounts using existing points No cutting or fabrication required ⚠️ Important Notes Designed for protection, not structural support Periodic cleaning recommended to maintain airflow Ensure proper fitment after installation

Read more less

Ride Higher. Ride Smarter. The Moto Torque Handlebar Risers for Yamaha XSR 155 are designed to improve rider ergonomics by raising the handlebar position. This reduces wrist strain, improves posture, and delivers a more comfortable riding stance, especially for long rides and city commuting. 🧍 Improved Riding Ergonomics Raises handlebar position for a more upright posture Reduces pressure on wrists, shoulders, and lower back Ideal for daily commuting and touring 🛣️ Better Control & Comfort Enhances rider confidence in traffic and long rides Improves handling feel with a more natural reach Reduces fatigue during extended riding sessions 🏗️ Aluminium Construction Built using lightweight aluminium Strong and durable for daily riding conditions Designed to maintain structural integrity under load 🎯 Bike-Specific Fitment Designed specifically for Yamaha XSR 155 Seamless integration with stock handlebar mounts No major modifications required 🛠️ Easy Installation Bolt-on installation Compatible with stock cables and wiring (in most cases) Quick upgrade with minimal effort ⚠️ Important Notes Check cable slack after installation Riding posture will change, may require adjustment period Intended for comfort, not aggressive racing setups 🛡️ Warranty Manufacturer warranty as provided by Moto Torque RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, refer to our warranty policy.

Read more less

Utility Meets Comfort for XSR 155 The Moto Torque Back Carrier with Backrest is designed to enhance the usability of the Yamaha XSR 155 by combining a luggage platform with a cushioned backrest. It supports light touring needs while improving pillion comfort during daily rides. 🧳 Luggage-Ready Rear Platform Flat carrier surface for soft luggage and essentials Ideal for city commutes and short touring setups Helps keep luggage stable and organized 🪑 Integrated Pillion Backrest Cushioned back support for added passenger comfort Improves riding confidence for pillion riders Useful for longer rides and stop-go traffic 🏗️ Durable Construction Built from strong metal structure Designed for everyday usage Finished with a protective coating for durability 🎯 Bike-Specific Fitment Designed for Yamaha XSR 155 Uses existing mounting points No major modifications required ⚖️ Light Touring Capability Suitable for soft luggage setups Recommended for light loads (approx. up to 4 kg as per brand guidance) Ideal for daily and short-distance touring 🛠️ Installation Bolt-on installation Secure mounting design Straightforward setup process 📦 Compatibility Yamaha XSR 155 ⚠️ Important Notes Not intended for heavy-duty luggage or top box mounting Load handling depends on mounting and riding conditions Ensure luggage is properly secured before riding 🛡️ Warranty Manufacturer warranty as provided by Moto Torque RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, refer to our warranty policy.

Read more less

Purpose-Built Saddle Stay for XSR 155 The Moto Torque Saddle Stay is designed specifically for the Yamaha XSR 155 to support saddle bags and luggage during daily rides and longer journeys. Its structure helps maintain bag positioning and prevents unwanted movement or contact with critical components. 🧳 Stable Luggage Support Provides a dedicated frame for saddlebag mounting Helps keep luggage securely positioned Reduces sway during riding 🏗️ Strong Tubular Construction Built using durable metal tubing Designed to handle everyday riding loads Maintains structural stability over time 🎯 Bike-Specific Fitment Designed for Yamaha XSR 155 Mounts using existing points No cutting or modification required 🎨 Clean Integrated Design Black finish complements the bike’s styling Blends with overall rear profile Maintains minimal visual clutter 🛠️ Installation Bolt-on installation Straightforward mounting process Compatible with standard saddlebag setups 📦 Compatibility Yamaha XSR 155 ⚠️ Important Notes Designed for saddlebag support (not a load-bearing carrier platform) Ensure proper luggage fastening before riding Load capacity depends on mounting and riding conditions 🛡️ Warranty Manufacturer warranty as provided by Moto Torque RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, refer to our warranty policy. ⚙️ SPECIFICATIONS Product Type: Saddle Stay Material: Metal Tubular Frame Finish: Black Fitment: Bolt-On Compatibility: Yamaha XSR 155

Read more less

Engineered Protection for Yamaha XSR 155 The Moto Torque Crash Guard (Black) is designed specifically for the Yamaha XSR 155, offering reliable protection for critical engine and frame components during everyday riding and unexpected drops. Built with precision and durability in mind, it integrates seamlessly with the bike’s structure while maintaining its signature retro-modern styling. 🛡️ Impact-Focused Design Reinforced tubular steel construction Designed to absorb and distribute impact forces Protects engine casing and lower frame sections ⚙️ Dual Slider Protection System Integrated nylon impact sliders Reduces direct stress transfer to chassis Minimizes damage during falls 🏗️ High-Strength Build Quality Constructed from high-grade mild steel tubing Engineered for structural rigidity and durability Built to handle real-world riding conditions 🎯 Precision Fitment Bike-specific design for Yamaha XSR 155 Direct mounting points No cutting or modification required 🧪 Durable Finish Black powder-coated surface Corrosion and weather resistant Maintains finish over long-term use 🔩 Premium Hardware Included Stainless Steel 304 nuts and bolts Designed for long-term reliability 🛠️ Installation Straightforward bolt-on installation No special tools required Secure mounting with factory-aligned points 📦 Smart Fitment System (QR-Based) Comes with QR-based fitment guide Scan to: Verify product authenticity Register warranty Access installation guide 🛡️ Warranty Lifetime warranty on nuts & bolts 6-month warranty on powder coating RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, refer to our warranty policy.

Read more less

Moto Torque Crash Guard - Royal Enfield Hunter 350 - Engine Protection (The Bull) The Moto Torque “The Bull” Crash Guard is engineered specifically for the Royal Enfield Hunter 350, designed to provide structured protection for the engine area, frame, and lower sections during real-world riding conditions. Built around the Hunter 350’s chassis geometry, this crash guard integrates without interfering with the motorcycle’s natural stance or riding dynamics. It is intended as a protective component, not a cosmetic add-on, with focus on structural strength and functional reliability. Material & Construction The crash guard is constructed using high-quality steel tubing with 2 mm wall thicknessdesigned to handle impact stress and resist deformation under load. Key construction highlights: MIG welding across critical joints for structural strength CNC-bent tubing for consistent fitment and alignment Grid blasting + powder coating for corrosion resistance Stainless steel 304 nuts and bolts for long-term durability This combination ensures the guard maintains integrity across daily use, touring conditions, and occasional impact scenarios. Design & Protection Coverage “The Bull” design focuses on practical protection zones: Engine casing Lower frame sections Exhaust routing area The structure is designed to absorb and distribute impact forces during low-speed falls or tip-overs, helping reduce direct load on critical components. Fitment is tailored specifically for the Hunter 350, ensuring: Proper mounting alignment No interference with riding ergonomics Clean integration with the motorcycle’s overall design Installation & Fitment Designed specifically for Royal Enfield Hunter 350 No major modifications required when installed correctly DIY fitment possible Tools required: Allen key (8 mm & 6 mm) Spanner (16/17) Professional installation is recommended for proper torque and alignment. Warranty Information Moto Torque provides: 6 Months Warranty on powder coating finish Lifetime Warranty on stainless steel nuts and bolts Note: Rawtorque does not provide any additional warranty beyond the manufacturer’s coverage.For complete terms, claims, and process details, please refer to our warranty policy.

Read more less