Products

Rolon Chain & Sprocket Kit for Honda X-Blade (15T / 45T – 130 Links) Matched Final-Drive Replacement for Honda X-Blade The Rolon Chain & Sprocket Kit for Honda X-Blade is a complete final-drive replacement set engineered to maintain original drivetrain geometry and smooth power delivery. This kit includes a front sprocket, rear sprocket, and drive chain configured specifically for the Honda X-Blade platform. The kit retains the original equipment tooth count and chain length required for correct alignment and load distribution: Front Sprocket: 15 TeethRear Sprocket: 45 TeethChain Length: 130 Links Correct tooth count and chain length are essential for preserving factory gear ratios, acceleration characteristics, and chain tension behavior. This kit is designed to maintain OE-spec drivetrain performance without altering sprocket ratios. Designed for Proper Drivetrain Geometry Chain and sprocket systems operate as a unified assembly. Pitch accuracy, tooth profile consistency, and alignment precision directly affect: Power transmission efficiencyChain wear patternsVibration levelsNoise outputLong-term durability This Rolon kit is manufactured to OE-spec dimensions for seamless compatibility with the Honda X-Blade drivetrain layout. Always replace chain and sprockets together as a set to prevent uneven wear and premature component degradation. Front Sprocket – Precision & Durability The front sprocket in this kit is engineered for structural strength and accurate spline engagement with the countershaft. Key construction features include: Heat-treated steel construction for durabilityPrecision-machined tooth profile for accurate chain engagementAnti-wear surface treatment to reduce material fatigueCorrosion-resistant protective coating Heat treatment improves resistance to deformation under torque load. Precision machining supports consistent chain contact across all teeth, reducing localized stress points. The sprocket is designed to maintain OE-spec fitment for proper alignment with the front sprocket shaft and chain line. Rear Sprocket – Strength & Wear Resistance The rear sprocket is manufactured using hardened carbon steel and treated for long-term durability under continuous rotational load. Construction highlights include: Premium carbon steel base materialInduction-hardened teeth for improved wear resistanceZinc coating for corrosion protectionShot-blasted finish to enhance surface fatigue strength Induction hardening strengthens the tooth surface layer, helping maintain profile accuracy over extended use. Zinc coating supports rust prevention, particularly in humid or wet riding environments. The sprocket is engineered for accurate mounting on the Honda X-Blade rear hub assembly. Chain – 130 Link Configuration The chain supplied in this kit features: OE-spec pitch for Honda X-Blade130-link configurationSteel construction designed for standard road use Correct chain length ensures proper axle adjustment range and correct slack setting. Using incorrect link counts may affect wheel alignment and tension adjustment. After installation, chain slack should be set as per Honda’s service manual specification. Quality Control & Manufacturing Rolon components undergo multiple production stages and quality inspections to maintain dimensional consistency and structural integrity. Precision manufacturing helps ensure: Accurate tooth spacingUniform hardness levelsConsistent alignment across drivetrain components Reliable final-drive performance depends heavily on manufacturing accuracy. Fitment & Compatibility Compatible Model: Honda X-Blade Front Sprocket: 15TRear Sprocket: 45TChain Links: 130 This kit is intended for Honda X-Blade motorcycles using the above drivetrain configuration. Always confirm existing sprocket tooth count before purchase. Kit Contents 1 × Front Sprocket (15 Teeth)1 × Rear Sprocket (45 Teeth)1 × Drive Chain (130 Links) Supplied as a matched drivetrain set. Specifications Brand: RolonProduct Type: Chain & Sprocket KitApplication: Final Drive ReplacementFront Sprocket Teeth: 15TRear Sprocket Teeth: 45TChain Links: 130Material: Hardened Steel SprocketsSurface Treatment: Zinc-coated / Anti-corrosion treated Installation & Usage Notes Replace chain and sprockets togetherAdjust chain slack after installationEnsure correct rear wheel alignmentLubricate chain at recommended intervalsProfessional installation recommended Incorrect tension or misalignment may reduce drivetrain lifespan. Summary The Rolon Chain & Sprocket Kit for Honda X-Blade (15T / 45T – 130 Links) is a direct replacement final-drive solution engineered to maintain factory drivetrain geometry and consistent power transfer. With hardened steel sprockets and an OE-spec chain configuration, this kit supports smooth operation, controlled wear, and long-term reliability for everyday road use. Correct tooth count. Correct chain length. Matched drivetrain replacement.

Read more less

Rolon Brass Chain & Sprocket Kit for Royal Enfield Classic 350 (Rear Drum Brake Variant) The Rolon Brass Chain & Sprocket Kit (Drum) is a matched final-drive replacement kit developed specifically for Royal Enfield Classic 350 motorcycles equipped with a rear drum brake. This kit includes: • 1 × Rolon brass-coated drive chain• 1 × Front sprocket• 1 × Rear sprocket All components are manufactured to match the drivetrain geometry used on Classic 350 drum-brake models, including correct pitch, tooth profile, mounting dimensions, and alignment characteristics. This kit is designed strictly for rear drum brake variants of the Classic 350. It is not interchangeable with disc-brake variants or newer J-platform / Reborn models. Platform & Brake-Type Specific Fitment Classic 350 motorcycles have existed across multiple generations and brake configurations. Drivetrain geometry varies between: • Drum brake variants• Rear disc brake variants• J-platform (Reborn) models Sprocket carrier design, offset spacing, and chain length differ between these configurations. This Rolon kit is engineered exclusively for Classic 350 motorcycles equipped with a rear drum brake hub. Compatible Model Royal Enfield Classic 350 — Rear Drum Brake variants only Not Compatible With Classic 350 with rear disc brakeClassic 350 Reborn (J-platform)Meteor 350Hunter 350Bullet 350 J-platformRoyal Enfield 500 modelsAny Royal Enfield with different sprocket carrier configuration ⚠️ This kit is designed strictly for Classic 350 motorcycles equipped with a rear drum brake. Do not install on disc-brake or J-platform models. Correct brake-type identification is critical before purchase. Chain Construction – Brass-Coated Steel The drive chain supplied in this kit features steel construction with a brass surface coating. Brass-coated chains are commonly selected for their: Improved corrosion resistanceReduced surface oxidationEnhanced durability in moisture-prone environmentsBetter resistance to environmental exposure compared to untreated steel chains The brass layer acts as a protective surface coating over the steel rollers and side plates. It does not change chain pitch or geometry, but it enhances resistance to environmental wear over time. The chain maintains standard pitch and roller dimensions required for Classic 350 drum-brake drivetrains. Front & Rear Sprocket Construction The sprockets included in this kit are manufactured from hardened steel and cut to match the OEM geometry used on Classic 350 drum-brake variants. Correct sprocket geometry ensures: Proper chain engagementEven load distribution across teethReduced localized wearStable chain tension behaviour during operation Sprocket tooth profile and pitch must align precisely with chain dimensions. Mismatched sprockets can accelerate wear and cause uneven drivetrain performance. This kit maintains OEM-spec mounting compatibility for the Classic 350 drum-brake hub and front sprocket carrier. Why Replace as a Complete Set Chain and sprockets wear together as a system. Replacing only one component can result in uneven wear patterns and reduced service life. This Rolon kit is supplied as a matched drivetrain set to maintain: Uniform wear characteristicsCorrect load distributionConsistent final-drive performanceBalanced chain tension behaviour Replacing all components together supports drivetrain longevity and smoother power transfer. Kit Contents 1 × Rolon brass-coated drive chain1 × Front sprocket1 × Rear sprocket Supplied as a matched chain-and-sprocket drivetrain set. Construction & Material Overview Chain: Steel constructionBrass surface coatingStandard pitch and roller dimensions for Classic 350 drum drivetrain Sprockets: Hardened steel constructionOEM-spec tooth profile and pitchDesigned for alignment with drum-brake hub configuration Verified Specifications Brand: RolonProduct Type: Motorcycle chain & sprocket kitApplication: Final drive replacementChain Type: Brass-coated steel chainRear Brake Compatibility: Drum brake onlyPosition: Front + Rear drivetrainVehicle Compatibility: Royal Enfield Classic 350 (drum brake variants) Installation & Usage Notes Install only on Classic 350 motorcycles equipped with rear drum brakesAlways replace chain and sprockets together as a setSet correct chain slack after installationEnsure accurate rear wheel alignmentLubricate chain after installation and at regular service intervalsProfessional installation recommended Incorrect alignment or improper tension may reduce drivetrain lifespan. Summary The Rolon Brass Chain & Sprocket Kit (Drum) is a brake-type specific final-drive replacement designed exclusively for Royal Enfield Classic 350 motorcycles equipped with a rear drum brake. With a brass-coated steel chain and hardened OEM-spec sprockets, this kit maintains proper pitch alignment, tooth engagement, and drivetrain load distribution defined for the drum-brake Classic platform. Drum-specific geometry.Matched replacement set.Correct Classic 350 fitment.

Read more less

The Rolon Brass Chain & Sprocket Kit is expertly crafted for riders who demand excellent durability, smooth power transfer, and extended service life specifically for the Honda H’ness CB350 and CB350RS motorcycles. This premium kit stands out as a top choice to enhance your bike's overall performance while ensuring reliable operation on every ride. The meticulous design ensures that every component works in harmony with your motorcycle's drivetrain system. This complete kit features a brass-coated roller chain that is engineered to significantly reduce friction and improve corrosion resistance. The brass coating maintains consistent lubrication under various riding conditions, making sure the chain performs at its best. The Rolon Brass Chain extends the lifespan of both the chain and sprockets, making it an ideal option for riders who frequently cover long distances or encounter stop-and-go traffic. The sprockets included in the kit are precision-machined to perfectly match OEM tooth profiles. This precision ensures flawless chain engagement and evenly distributes load across the drivetrain. When combined as a set, the sprockets and brass chain provide smoother acceleration, lower drivetrain noise, and longer lasting performance. These qualities remain effective whether you're navigating city streets or cruising on highways. Rolon Brass Chain: Fitment & Compatibility This Rolon Brass Chain and sprocket kit is compatible with motorcycles using factory-standard sprocket sizes. It is crucial to confirm your current sprocket tooth count before installation, especially if your motorcycle has undergone any previous modifications. Proper fitment guarantees optimal performance and safety. Compatible with Honda H’ness CB350 Compatible with Honda CB350RS The Rolon Brass Chain is an ideal fit for these specific Honda models. It maintains factory gearing characteristics, allowing riders to upgrade to a more durable chain without sacrificing performance or smooth power delivery. Specifications of the Rolon Brass Chain Kit Brand: Rolon Product Type: Chain & Sprocket Kit Chain Type: Brass-coated roller chain Chain Size: 520 Chain Links: 104 Links Front Sprocket: 14 Teeth Rear Sprocket: 41 Teeth Material (Chain): High-strength steel with brass coating Material (Sprockets): Hardened steel Finish: Brass (chain), black steel sprockets Installation Type: Direct replacement Country of Origin: India Installation Instructions The kit serves as a direct replacement for the stock chain and sprockets on your Honda H’ness CB350 or CB350RS. To ensure optimal performance and safety, professional installation is highly recommended. Proper chain tension, precise sprocket alignment, and correct torque settings are critical for excellent drivetrain function and rider safety. Why Choose the Rolon Brass Chain Kit? The Rolon Brass Chain is well-known for its tough brass coating that substantially reduces wear on your motorcycle’s drivetrain components. The brass finish provides outstanding resistance to rust and corrosion. This leads to a longer-lasting chain compared to standard steel options. Such durability means fewer replacements and smoother rides on diverse road surfaces and weather conditions. In addition to the brass-coated chain, the kit includes sprockets with a superior hardened steel finish. This ensures that the entire transmission setup works seamlessly. The result is sustained power delivery even in demanding riding environments. Installing a quality chain guard is also advisable. A chain guard protects the chain from debris, enhancing safety and prolonging the effective life of the drivetrain components. What’s Included in the Rolon Brass Chain & Sprocket Kit? 1 × Rolon brass-coated chain (104 links) 1 × Front sprocket (14 Teeth) 1 × Rear sprocket (41 Teeth) This kit provides you with everything needed for a comprehensive drivetrain upgrade or replacement on compatible Honda models. The Rolon Brass Chain guarantees excellent cohesion with the sprockets. This cohesion promotes balanced wear and reliable performance over time. Additional Benefits of Brass Coating The brass material on the chain significantly improves its ability to retain lubrication. This reduces internal friction and heat build-up within the chain links and rollers. These effects extend the component life and contribute to quieter operation of the drivetrain. Riders will appreciate smoother power shifts along with noticeably reduced noise during acceleration and cruising. Choosing the right chain guard can further protect your Rolon Brass Chain from exposure to environmental contaminants like dirt and water. This protection prolongs the effective lifespan of your drivetrain components by minimizing abrasive and corrosive contact. Such maintenance-friendly features make the Rolon kit an excellent choice for riders prioritizing reliability and durability.

Read more less

The Rolon Brass Chain & Sprocket Kit for KTM Adventure 390 is a complete stock-spec drivetrain replacement designed specifically for the KTM Adventure 390. This kit includes a brass-coated drive chain along with matching front and rear sprockets. It is supplied as a matched set so all drivetrain components wear together evenly. This ensures consistent performance and long-term reliability. Replacing only the chain or only the sprockets can cause premature wear. Worn sprockets can damage a new chain quickly. A stretched chain can accelerate sprocket tooth wear. The Rolon Brass Chain & Sprocket Kit for KTM Adventure 390 eliminates that mismatch by replacing the entire drivetrain contact system at once. Designed as a Direct Replacement This kit is engineered to match the KTM Adventure 390’s original factory drivetrain dimensions. It maintains the stock chain pitch, width, and tooth count. No gearing ratio changes are introduced. Wheel alignment and swingarm geometry remain unchanged. The Rolon Brass Chain & Sprocket Kit for KTM Adventure 390 is not a performance ratio upgrade. It is a stock-spec replacement solution. That means installation does not require modifications or recalibration. It restores factory riding characteristics without altering power delivery behavior. Brass-Coated Chain Construction The drive chain in this kit features brass-coated outer plates. The brass coating provides an additional surface layer that helps improve corrosion resistance in varied riding environments. This is especially relevant for motorcycles used in touring, rain exposure, or dusty road conditions. Internally, the chain uses hardened steel pins, rollers, and bushings. These components handle load transfer from the engine to the rear wheel. The brass finish is applied externally and does not change the internal mechanical strength. It adds durability while maintaining stock fitment specifications. Regular cleaning and lubrication remain essential. Even brass-coated chains require periodic maintenance to protect internal moving parts. Matched Steel Sprockets The kit includes both front and rear sprockets manufactured to KTM Adventure 390 factory specifications. The front sprocket fits directly onto the gearbox output shaft. The rear sprocket mounts to the original rear hub bolt pattern without modification. Tooth profiles are precision-machined to match the supplied chain. Proper pitch engagement reduces uneven load distribution. This supports smoother throttle response and stable power transfer. Because the sprockets are designed to work with the included chain, drivetrain wear is distributed evenly across all contact surfaces. Why Replace as a Complete Kit Drivetrain components wear together as a system. When one part degrades, it affects the others. Installing a new chain on worn sprockets can cause accelerated elongation. Installing new sprockets with an old chain can cause premature tooth wear. The Rolon Brass Chain & Sprocket Kit for KTM Adventure 390 solves this by refreshing the entire system. All engagement surfaces begin their wear cycle together. This helps extend service life under normal riding conditions. Real-World Use Suitability This kit is suitable for: • Daily commuting• Long-distance touring• Mixed on-road use• Light adventure riding• Standard maintenance replacement It is not marketed as a racing chain conversion. It does not alter final drive ratios. It is intended to restore original drivetrain condition when the stock setup has reached its wear limit. Installation & Service Notes Installation requires removal of the existing chain and sprockets. Proper torque specifications must be followed for the front sprocket nut and rear sprocket bolts. After installation, chain slack must be adjusted to KTM factory recommendations. Improper chain tension can cause premature wear or drivetrain stress. Post-installation inspection after initial riding is recommended. Chain lubrication should be maintained at regular service intervals. Professional installation is advised for riders unfamiliar with drivetrain servicing. Compatibility This product is compatible with: KTM Adventure 390 (Stock drivetrain configuration) Buyers should confirm exact model compatibility before purchase. What’s Included 1 × Rolon brass-coated drive chain1 × Front sprocket1 × Rear sprocket Only listed components are included. Frequently Asked Questions Does the Rolon Brass Chain & Sprocket Kit for KTM Adventure 390 change stock gearing?No. This kit maintains the original factory gearing ratio and tooth count. It is designed as a stock-spec replacement. Is this kit suitable for touring and long-distance riding?Yes. It is intended for standard road use, commuting, and touring under normal maintenance conditions. Do I need to replace both chain and sprockets together?Yes. Replacing them as a complete set helps prevent uneven wear and supports longer drivetrain service life. Is this compatible with KTM Adventure 390 only?Yes. This listing is specifically for KTM Adventure 390 stock drivetrain configuration. Specifications Brand: RolonProduct Type: Chain & Sprocket KitApplication: Motorcycle drivetrain replacementVehicle Compatibility: KTM Adventure 390Chain Finish: Brass-coated outer platesReplacement Type: Stock-spec direct replacement

Read more less

The Rolon Brass Chain & Sprocket Kit for the Royal Enfield Himalayan 411 is specially engineered to handle sustained loads and long-distance touring. This robust kit supports mixed terrain riding typical of the Himalayan platform. It is designed to deliver exceptional reliability and durability in harsh and varying environments. Riders who demand consistent performance on highways and off-road trails will find this kit an ideal choice among Royal Enfield Himalayan parts. This kit includes a brass-coated roller chain designed to reduce friction between the chain links and sprockets. The brass coating offers excellent corrosion resistance, effectively protecting the chain from rust and wear. Additionally, this coating improves lubrication retention that makes the chain’s lifespan longer than conventional steel chains. Such an advantage is crucial for riders frequently facing wet or dusty conditions during their trips. The brass coating decisively slows wear and tear on both the chain and sprockets. This means the drivetrain components maintain optimal function over an extended period. Whether cruising on highways or navigating rough off-road sections, the Rolon brass chain performs exceptionally well. Its sturdy design ensures smooth power delivery and significantly reduces drivetrain noise during operation. Royal Enfield Himalayan parts: Fitment & Compatibility The Rolon Brass Chain & Sprocket Kit is precisely designed and tested exclusively for the Royal Enfield Himalayan 411 model. It fits the 411cc platform perfectly, assuring seamless integration with your motorcycle. This ensures compatibility and optimal performance while using genuine Royal Enfield Himalayan parts. This kit is specifically designed for the Himalayan 411 and is not compatible with the Himalayan 450 or other Royal Enfield models. Using the correct kit guarantees proper chain tension, sprocket alignment, and overall drivetrain efficiency, which is key when upgrading parts in your himalayan motorcycle. Compatible Model: Royal Enfield Himalayan 411 Specifications Brand: Rolon Product Type: Chain & Sprocket Kit Chain Type: Brass-coated roller chain Chain Size: 520 Chain Links: 110 Links Front Sprocket: 15 Teeth Rear Sprocket: 38 Teeth Rear Sprocket Bolt Holes: 6 Material (Chain): High-strength steel with brass coating Material (Sprockets): Hardened steel Installation Type: Direct replacement Country of Origin: India Installation for Royal Enfield Himalayan parts This kit serves as a direct replacement for the stock chain and sprockets on the Himalayan 411. Installing the kit is straightforward following proper procedures. It maintains OEM gearing and ride characteristics, making installation hassle-free. Professional installation is recommended to ensure correct alignment, chain tension, and sprocket torque settings. Proper installation helps avoid premature wear and drivetrain issues, ensuring the best performance and safety. This is important when upgrading any Royal Enfield Himalayan parts or accessories. What’s Included 1 × Rolon brass-coated chain (110 links) 1 × Front sprocket (15T) 1 × Rear sprocket (38T) Using this complete kit guarantees compatibility and balanced wear across the drivetrain components. The combination of brass-coated chain and hardened steel sprockets ensures long service life while reducing noise and vibration. This assembly is fit for riders who prioritize reliability in his Royal Enfield Himalayan parts. The Rolon Chain & Sprocket Kit optimizes power delivery while protecting drivetrain components from accelerated wear. It is designed for riders who demand durability and consistent performance in varied riding conditions. The brass chain’s corrosion resistance and enhanced lubrication retention make it perfect for touring and mixed terrain use, unlike ordinary filters or parts. Overall, this kit offers excellent value by extending the maintenance intervals typically expected from the Himalayan 411’s drive system. When regularly lubricated and professionally installed, it ensures reliability on every ride. Whether you are exploring rough mountain trails or covering long highway journeys, this kit is an essential addition to your Royal Enfield Himalayan parts collection.

Read more less

Rolon Brass Chain & Sprocket Kit for Royal Enfield Meteor 350, Hunter 350 & Classic 350 Reborn (J-Platform) The Rolon Brass Chain & Sprocket Kit is a matched final-drive replacement set developed specifically for Royal Enfield J-platform 350 motorcycles. This includes: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Series) These motorcycles share a common J-platform drivetrain architecture. This kit is engineered to align with that platform’s original equipment geometry, maintaining correct pitch, sprocket tooth profile, chain alignment, and drivetrain load distribution. This is a direct-replacement drivetrain kit. It is not a universal chain kit and must not be installed on non–J-platform Royal Enfield motorcycles. Platform-Specific Fitment – J-Series Only Royal Enfield’s J-platform introduced a revised engine and drivetrain configuration compared to older UCE-era motorcycles. Differences include sprocket alignment, carrier geometry, and drivetrain layout. This Rolon kit is designed strictly for J-platform 350cc motorcycles. Compatible Models: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Platform) Not Compatible With: Classic 350 (UCE platform – drum or disc variants)Bullet 350 UCERoyal Enfield 500 modelsHimalayan 411 / 450Any non–J-platform Royal Enfield motorcycles ⚠️ This kit is designed only for Royal Enfield J-platform 350 motorcycles. It must not be installed on UCE-era Classic or Bullet models. Correct platform identification is critical. Chain pitch and sprocket alignment differ across generations. Chain Construction – Brass-Coated Steel The drive chain supplied in this kit features steel construction with a brass surface coating. The brass coating serves multiple functions: Improved resistance to surface oxidationReduced susceptibility to moisture-related corrosionEnhanced surface durability compared to untreated steel chainsSupport for smoother long-term operation under similar riding conditions The chain maintains OEM-spec pitch and roller dimensions for J-platform drivetrains. Correct pitch alignment is essential for maintaining smooth sprocket engagement and minimizing premature wear. The brass coating does not alter drivetrain geometry. It serves as a protective surface treatment over the steel structure. Front & Rear Sprocket Construction The front and rear sprockets included in this kit are manufactured from hardened steel and cut to match OEM mounting geometry used on J-platform motorcycles. Sprocket accuracy directly influences: Chain engagement consistencyLoad distribution across teethDrivetrain smoothnessWear uniformity Incorrect tooth profile or pitch mismatch can accelerate chain wear and produce uneven drivetrain behaviour. This Rolon kit maintains OEM-spec tooth count and geometry for J-platform alignment. Both sprockets are designed to integrate directly with factory mounting points and carriers used on Meteor 350, Hunter 350, and Classic 350 (Reborn). Why Replace as a Matched Set Chain and sprockets wear together as a system. Installing a new chain on worn sprockets — or vice versa — can accelerate uneven wear and reduce service life. This kit is supplied as a matched drivetrain set to maintain: Uniform wear patternsProper chain tension behaviourBalanced load distributionConsistent final-drive performance Replacing all three components together supports drivetrain longevity and stable power transfer. Kit Contents 1 × Rolon Brass-Coated Drive Chain1 × Front Sprocket1 × Rear Sprocket Supplied as a matched final-drive set. Construction & Material Overview Chain: Steel constructionBrass surface coatingOEM-spec pitch and roller dimensions Sprockets: Hardened steel constructionOEM-spec tooth profileDesigned for J-platform sprocket carriers Verified Specifications Brand: RolonProduct Type: Motorcycle chain & sprocket kitApplication: Final drive replacementChain Type: Brass-coated steel chainPlatform Compatibility: Royal Enfield J-platform 350ccPosition: Front + Rear drivetrainVehicle Compatibility: Meteor 350, Hunter 350, Classic 350 (Reborn) Installation & Usage Notes Install only on Royal Enfield J-platform 350 motorcyclesAlways replace chain and sprockets together as a matched setEnsure correct chain slack adjustment after installationVerify rear wheel alignmentLubricate chain after installation and at regular service intervalsProfessional installation recommended Incorrect chain tension or misalignment may affect drivetrain longevity. Summary The Rolon Brass Chain & Sprocket Kit is a platform-specific final-drive replacement set engineered for Royal Enfield J-platform 350 motorcycles including the Meteor 350, Hunter 350, and Classic 350 (Reborn). With a brass-coated steel chain and hardened OEM-spec sprockets, the kit maintains correct pitch alignment, tooth engagement, and drivetrain load distribution defined for the J-series platform. Strictly for J-platform models.Matched set replacement.Correct geometry. Reliable final drive.

Read more less

The Rolon Brass Chain & Sprocket Kit for Yamaha R15 V3 / V4 is a premium direct replacement upgrade for the stock drive chain and sprockets on these motorcycle models. Designed specifically for Yamaha R15 V3 and R15 V4, this kit ensures optimal compatibility and fitment. It includes a brass-plated chain paired with front and rear sprockets engineered to match the original equipment manufacturer (OEM) specifications exactly. This ensures seamless integration with your bike’s drivetrain system and reliable performance on every ride. The brass-plated chain in this Rolon Brass Chain & Sprocket Kit offers significant advantages over standard untreated chains. Its plating provides enhanced wear resistance, which helps protect the chain from premature damage due to daily riding stresses. Moreover, the brass coating improves corrosion resistance, a key factor in prolonging chain life and reducing the need for frequent maintenance or replacements. Riders will benefit from a more durable, longer-lasting chain that withstands varied environmental conditions effectively, such as rain and dust. The sprockets in the kit are made of high-strength steel, crafted with precision to maintain the efficient transfer of power throughout the drivetrain. Accurate tooth profiles reduce slippage during acceleration or under heavy load, improving the overall riding experience. These sprockets also offer robustness and durability, ensuring that they endure the rigors of everyday riding and performance demands. Their design is optimized to maintain the Yamaha R15’s smooth and reliable power delivery without compromise. Rolon Brass Chain & Sprocket Kit: Overview and Benefits Produced by Rolon, a well-reputed Indian manufacturer known for high-quality motorcycle chains and sprocket kits, this product embodies precision engineering and reliability. The Rolon Brass Chain & Sprocket Kit is tailored for riders seeking an OEM-compatible replacement or an upgrade solution for their Yamaha R15’s final drive components. It guarantees a durable and performance-oriented option that stays true to factory-fit standards for safety and efficiency on the road. This kit not only excels in durability but also focuses on minimizing maintenance efforts. The brass chain’s corrosion resistance means fewer cleanings and lubrications, saving time and hassle for riders. Additionally, the OEM-matched sprockets ensure straightforward installation with no need for modification, supporting hassle-free upgrades or replacements in your bike’s drive setup. This feature makes it an ideal choice for practical motorcycle owners who prefer reliability and convenience. Specifications of Rolon Brass Chain & Sprocket Kit Brand: Rolon Product Type: Chain & Sprocket Kit Compatible Bikes: Yamaha R15 V3, Yamaha R15 V4 Part Number / SKU: KIT NARCF326 / NaRC-F326 Chain Material: Brass-plated steel Front Sprocket: 14 Teeth Rear Sprocket: 48 Teeth Chain Links: 128 links (R428NARC-128-1 spec) Country of Origin: India Manufacturer: Rolon Durability and Performance Features of Rolon Brass Chain & Sprocket The Rolon Brass Chain & Sprocket kit focuses on enhancing the durability of the Yamaha R15’s drivetrain. The brass plating on the chain helps it resist rust and corrosion better than standard chains. Standard chains often wear out quickly, especially in rainy or dusty conditions. This enhanced resistance prolongs the chain’s functional lifespan while maintaining its strength and flexibility. Riders experience smoother rides with a drivetrain that remains dependable over time. The sprockets contribute to performance by providing stable and secure engagement with the chain links. Their high-quality steel construction combined with precisely engineered tooth profiles reduces power loss across the drivetrain. This improvement results in better acceleration responsiveness and smoother rides for everyday use or spirited riding. Riders also notice a reduction in drivetrain noise and vibrations, which enhances overall comfort on every journey. Perfect OEM Fitment for Yamaha R15 V3 and V4 This kit is engineered with accuracy to ensure it matches the dimensions and specifications of the original components fitted on Yamaha R15 V3 and R15 V4 motorcycles. The front sprocket has 14 teeth, and the rear sprocket has 48 teeth, mirroring OEM specifications perfectly. The chain features 128 links, which adhere to the exact standard for optimal tension and alignment. This design minimizes the need for adjustments beyond regular maintenance, ensuring hassle-free service. Because it is an OEM-compatible product, the Rolon Brass Chain & Sprocket Kit simplifies installation. Riders or mechanics can replace worn components swiftly without additional customization or special tools. This compatibility also means the kit supports the expected performance and safety features designed by Yamaha. It is an ideal direct fit for both upgrades and replacements, providing peace of mind for users who value precision and quality. In summary, the Rolon Brass Chain & Sprocket kit for Yamaha R15 V3 / V4 combines robust materials, precise engineering, and OEM-level fitment. This ensures a reliable and durable drivetrain upgrade that optimizes both performance and maintenance convenience. Riders seeking long-term value and dependable operation in diverse conditions will find this kit a trustworthy addition to their motorcycle’s final drive system.

Read more less