Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK1J0615301D is a 256 mm cross-drilled and slotted front brake disc for the Skoda Fabia, Rapid & VW Polo, Polo GT, Vento (PR 1ZG, 256 mm). The holes and slots give heat, dust and water a path off the braking surface, which helps the pad keep clean contact under repeated hard braking. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Specification
Diameter
256 mm
Thickness
22 mm
Minimum thickness
19 mm
Height
37 mm
Bolt holes
5
Centering bore
65 mm
Disc type
Ventilated
Surface
Cross-drilled and slotted
Units per box
2 (left + right)
Intended use
Performance road driving
Cross-reference
Brembo 09701111
Brand
BrakeKraft
How do I know if my car is the 256 mm or the 288 mm?This family was built with two different front brake systems and they do not interchange. Check the PR code on the sticker in the boot, usually under the spare wheel, or in the service book.
PR 1ZG
256 mm front discs. This part.
PR 1ZC
288 mm front discs. This part will NOT fit. Message us and we will send the right one.
The front brake pads differ between the two systems as well, so if you are replacing both, confirm the PR code first.How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 22 mm when new and the minimum is 19 mm. Once it reaches minimum thickness it must be replaced, not skimmed.Will this fit my car?Listed against the Skoda Fabia, Rapid & VW Polo, Polo GT, Vento (PR 1ZG, 256 mm). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. In stock, dispatched in 1 to 2 business days.This listing covers the front axle. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Compound characteristics as published by BrakeKraft. Dimensions are the OE specification for this axle, cross-referenced to Brembo 09701111.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK18A615301 is a front-axle brake disc from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc. It is the 288 mm front disc used on the Skoda Octavia vRS Mk1 and on the Polo, Polo GT, Vento, Rapid and Fabia built with the larger front brake.Specification
Diameter
288 mm
Thickness
25 mm
Bolt holes
5
Centering bore
65 mm
Disc type
Ventilated
Axle
Front
BrakeKraft Drilled & Slotted characteristics
Surface
Cross-drilled and slotted
Intended use
Performance road driving
Purpose of drilling
Vents gas and heat away from the pad face
Purpose of slotting
Clears dust and debris, keeps the pad surface biting cleanly
Check this is your brake size before you orderThe Polo, Vento, Rapid and Fabia left the factory with two different front brake sizes, and the brake pads change along with the disc. They are not interchangeable.
PR 1ZC
288 mm front disc. This part.
PR 1ZG
256 mm front disc. You need the 256 mm part instead.
Your PR code is printed on the vehicle data sticker, in the spare wheel well under the boot carpet and in the service book. You can also measure the disc across the face. If you are not sure, send us your registration number or a photo of the sticker and we will confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatch is 1 to 2 business days.This listing covers the front axle. Tell us whether you need a single disc or the pair and we will confirm exactly what ships before we dispatch.Compound characteristics as published by BrakeKraft.
BrakeKraft BK4G0615301A is a cross-drilled and slotted 356 mm ventilated front brake disc for the Audi A8 3.0 TDI (356 mm). It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
356 mm
Thickness
34 mm
Minimum thickness
31.5 mm
Height
52 mm
Bolt holes
5
Centering bore
68 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.B971.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 34 mm when new and the minimum is 31.5 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.B971.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Audi A8 3.0 TDI (356 mm). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.B971.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK4M0615301AS is a cross-drilled and slotted 375 mm ventilated front brake disc for the Audi Q7 (4M) and Q8 with the 375 mm front brake.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Specification
Surface
Cross-drilled and slotted
Diameter
375 mm
Thickness
36 mm
Minimum thickness
34 mm
Height
57.2 mm
Bolt holes
5
Centering bore
68 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.F800.33
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 36 mm when new and the minimum is 34 mm. Once it reaches minimum thickness it must be replaced, not skimmed.Will this fit my car?For the Audi Q7 (4M, 2015 onwards) and Q8 fitted with the 375 mm front disc. Audi built these cars with several front disc sizes, so check that your current disc is 375 mm, or send us your registration number and we will confirm it before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this size, cross-referenced to Brembo 09.F800.33.
BrakeKraft BK302 is a cross-drilled and slotted 350 mm ventilated front brake disc for the Audi Q7 4L 3.0 TDI, Q7 4L 4.2 TDI & V8 Petrol & Porsche Cayenne 92A V6, Cayenne 9PA 3.0 Diesel. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
350 mm
Thickness
34 mm
Minimum thickness
32 mm
Height
69 mm
Bolt holes
5
Centering bore
85 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.C882.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 34 mm when new and the minimum is 32 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.C882.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Audi Q7 4L 3.0 TDI, Q7 4L 4.2 TDI & V8 Petrol & Porsche Cayenne 92A V6, Cayenne 9PA 3.0 Diesel. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.C882.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK1523795 is a cross-drilled and slotted 258 mm ventilated front brake disc for the Ford Fiesta, Fiesta (new model), Figo, Figo Titanium. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
258 mm
Thickness
23 mm
Minimum thickness
21 mm
Height
44 mm
Bolt holes
4
Centering bore
64 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.A968.21
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 23 mm when new and the minimum is 21 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.A968.21 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Ford Fiesta, Fiesta (new model), Figo, Figo Titanium. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.A968.21.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK45251SH3A00 is a cross-drilled and slotted 240 mm ventilated front brake disc for the Honda City, City (2nd gen, slotted). It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
240 mm
Thickness
21 mm
Minimum thickness
19 mm
Height
45 mm
Bolt holes
4
Centering bore
61 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.5285.75
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 21 mm when new and the minimum is 19 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.5285.75 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Honda City, City (2nd gen, slotted). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.5285.75.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK51712C8000 is a cross-drilled and slotted 256 mm ventilated front brake disc for the Hyundai Elite i20, i20 N Line. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
256 mm
Thickness
22 mm
Minimum thickness
20 mm
Height
44 mm
Bolt holes
4
Centering bore
62 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.D227.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 22 mm when new and the minimum is 20 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.D227.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Hyundai Elite i20, i20 N Line. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.D227.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK51712C8500 is a cross-drilled and slotted 280 mm ventilated front brake disc for the Hyundai i20 Active. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
280 mm
Thickness
22 mm
Minimum thickness
19.4 mm
Height
44 mm
Bolt holes
4
Centering bore
62 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.C174.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 22 mm when new and the minimum is 19.4 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.C174.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Hyundai i20 Active. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.C174.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK51767381 is a cross-drilled and slotted 305 mm ventilated front brake disc for the Jeep Compass, Renegade. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
305 mm
Thickness
28 mm
Minimum thickness
26 mm
Height
40 mm
Bolt holes
5
Centering bore
70 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.9363.21
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 28 mm when new and the minimum is 26 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.9363.21 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Jeep Compass, Renegade. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.9363.21.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BKLR132809 is a cross-drilled and slotted 363 mm ventilated front brake disc for the new Land Rover Defender (L663) 3.0 diesel and the Discovery 5 with the 363 mm front disc.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Specification
Surface
Cross-drilled and slotted
Diameter
363 mm
Thickness
33 mm
Minimum thickness
31 mm
Height
62 mm
Bolt holes
5
Centering bore
79 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.D550.23
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 33 mm when new and the minimum is 31 mm. Once it reaches minimum thickness it must be replaced, not skimmed.Will this fit my car?For the new Defender (L663, 2020 onwards) with the 3.0 six-cylinder diesel, and the Discovery 5 (L462), on the 363 mm front disc. The 2.0 petrol Defender uses a smaller 349 mm disc (our BKLR132808). Send us your registration number and we will confirm it before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this size, cross-referenced to Brembo 09.D550.23.
BrakeKraft BK5531152R50 is a cross-drilled and slotted 252 mm ventilated front brake disc for the Maruti Baleno RS. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
252 mm
Thickness
20 mm
Minimum thickness
18 mm
Height
40 mm
Bolt holes
4
Centering bore
60 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.D247.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 20 mm when new and the minimum is 18 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.D247.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Maruti Baleno RS. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.D247.11.
BrakeKraft BK5521176J10 is a cross-drilled and slotted 287 mm ventilated front brake disc for the Maruti Jimny (new model). It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
287 mm
Thickness
17 mm
Minimum thickness
15 mm
Height
46 mm
Bolt holes
5
Centering bore
108 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.C220.10
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 17 mm when new and the minimum is 15 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.C220.10 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Maruti Jimny (new model). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.C220.10.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK55311-62J00 is a cross-drilled and slotted 252 mm ventilated front brake disc for the Maruti Suzuki Swift 2005-2017, Dzire, Ritz & Ciaz, 252 mm. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
252 mm
Thickness
20 mm
Minimum thickness
18 mm
Height
40 mm
Bolt holes
4
Centering bore
60 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.A271.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 20 mm when new and the minimum is 18 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.A271.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Maruti Suzuki Swift 2005-2017, Dzire, Ritz & Ciaz, 252 mm. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.A271.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK5531152R00 is a cross-drilled and slotted 231 mm ventilated front brake disc for the Maruti Suzuki Swift 2018 onwards, Baleno & Dzire, 231 mm. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
231 mm
Thickness
17 mm
Minimum thickness
15 mm
Height
40 mm
Bolt holes
4
Centering bore
60 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.E661.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 17 mm when new and the minimum is 15 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.E661.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Maruti Suzuki Swift 2018 onwards, Baleno & Dzire, 231 mm. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.E661.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK2044210712 is a cross-drilled and slotted 295 mm ventilated front brake disc for the Mercedes C CLASS W204 (2008-2015) 180/200/220cdi, C CLASS W204 (2008-2015) C250 Cdi. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
295 mm
Thickness
28 mm
Minimum thickness
25.4 mm
Height
65 mm
Bolt holes
5
Centering bore
67 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.B280.41
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 28 mm when new and the minimum is 25.4 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.B280.41 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Mercedes C CLASS W204 (2008-2015) 180/200/220cdi, C CLASS W204 (2008-2015) C250 Cdi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.B280.41.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BKA0004212512 is a cross-drilled and slotted 305 mm ventilated front brake disc for the Mercedes C-Class W205 C220d, C200, E-Class W213 E200, E-Class W213 E220d (2017 onwards). It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
305 mm
Thickness
28 mm
Minimum thickness
25.4 mm
Height
63 mm
Bolt holes
5
Centering bore
69 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.D526.13
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 28 mm when new and the minimum is 25.4 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.D526.13 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Mercedes C-Class W205 C220d, C200, E-Class W213 E200, E-Class W213 E220d (2017 onwards). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.D526.13.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BKA0004212812 is a cross-drilled and slotted 342 mm ventilated front brake disc for the Mercedes C-Class W205 C300d, E-Class W213 E350d (non Sports pack), GLC 220d. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
342 mm
Thickness
32 mm
Minimum thickness
29.4 mm
Height
63 mm
Bolt holes
5
Centering bore
69 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.D529.13
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 32 mm when new and the minimum is 29.4 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.D529.13 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Mercedes C-Class W205 C300d, E-Class W213 E350d (non Sports pack), GLC 220d. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.D529.13.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BKA2224200272 is a cross-drilled and slotted 370 mm ventilated front brake disc for the Mercedes S-Class W222 S400d/S560. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
370 mm
Thickness
36 mm
Minimum thickness
34 mm
Height
64.5 mm
Bolt holes
5
Centering bore
70 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.F290.13
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 36 mm when new and the minimum is 34 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.F290.13 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Mercedes S-Class W222 S400d/S560. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.F290.13.
BrakeKraft BK1K0615301AJ is a cross-drilled and slotted 314 mm ventilated front brake disc for the Skoda Kodiaq. It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
314 mm
Thickness
30 mm
Minimum thickness
27 mm
Height
50 mm
Bolt holes
5
Centering bore
65 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.B635.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 30 mm when new and the minimum is 27 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.B635.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Skoda Kodiaq. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.B635.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK31341382 is a cross-drilled and slotted 300 mm ventilated front brake disc for the Volvo S60 II, V60, V70 III, XC70 II and S80 II with the 300 mm front disc.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Specification
Surface
Cross-drilled and slotted
Diameter
300 mm
Thickness
28 mm
Minimum thickness
26 mm
Height
52 mm
Bolt holes
5
Centering bore
64 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.A427.31
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 28 mm when new and the minimum is 26 mm. Once it reaches minimum thickness it must be replaced, not skimmed.Will this fit my car?Brembo lists this 300 x 28 mm disc for the Volvo S60 II (2010-2018), V60 I, V70 III, XC70 II and S80 II. These cars were built with more than one front disc size, so check that your current disc is 300 mm, or send us your registration number and we will confirm it before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this size, cross-referenced to Brembo 09.A427.31.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK31341644 is a cross-drilled and slotted 320 mm ventilated front brake disc for the Volvo V40 (16-inch wheels). It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
320 mm
Thickness
25 mm
Minimum thickness
23 mm
Height
49 mm
Bolt holes
5
Centering bore
64 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.C542.21
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 25 mm when new and the minimum is 23 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.C542.21 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the Volvo V40 (16-inch wheels). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.C542.21.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK2Q0615301H is a cross-drilled and slotted 276 mm ventilated front brake disc for the VW Virtus 1.0, VW Taigun & Skoda Kushaq 1.0 (276 mm). It is the same size as the original disc, so it bolts straight on with no brackets or changes.Price is for a pair. Supplied as a set of two, so one unit does both wheels on the axle. You do not need to order two.Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: same size as the original disc for this car.
Specification
Surface
Cross-drilled and slotted
Diameter
276 mm
Thickness
24 mm
Minimum thickness
21 mm
Height
44 mm
Bolt holes
5
Centering bore
65 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
Intended use
Performance road driving
Same size as
Brembo 09.D571.11
Brand
BrakeKraft
How do I know when the disc needs replacing?Measure across the braking surface at its thinnest point. This disc is 24 mm when new and the minimum is 21 mm. Once it reaches minimum thickness it must be replaced, not skimmed.BrakeKraft or the Brembo equivalent?Both are the same size and both fit. BrakeKraft is drilled and slotted for harder driving; Brembo 09.D571.11 is the OE-specification plain disc. See the Brembo version.Will this fit my car?Listed against the VW Virtus 1.0, VW Taigun & Skoda Kushaq 1.0 (276 mm). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will confirm the right part before you order.Good to knowFit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.Buying this partGST-inclusive pricing with a proper invoice, shipped across India. Dispatched in 1 to 2 business days.Dimensions are the OE specification for this axle, cross-referenced to Brembo 09.D571.11.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BrakeKraft BK5QP615301B is a cross-drilled and slotted front brake disc for the 1.5 TSI versions of the VW Virtus, VW Taigun, Skoda Slavia and Skoda Kushaq. It is the same 300 mm size as the original disc, so it bolts straight on with no brackets or changes.
Price is for a pair. Supplied as a set of two, so one unit does both front wheels.
Why fit it
Better under repeated hard braking: the holes and slots let hot gas, dust and water escape, keeping the pad in cleaner contact with the disc.
Coated finish: the pale coating protects the hat and edge against rust, which is the first thing to go on a plain disc.
Direct fit: 5-bolt, 300 x 24 mm, same as the original setup.
Specification
Surface
Cross-drilled and slotted
Finish
Coated, pale silver
Diameter
300 mm
Thickness
24 mm
Minimum thickness
21 mm
Height
44.3 mm
Bolt holes
5 (100 mm PCD)
Centre bore
65 mm
Disc type
Ventilated
Axle
Front
Units per box
2 (left + right)
OE reference
VW 5QP615301B
Same size as
Brembo 09.F222.11
Brand
BrakeKraft
New thickness is 24 mm and the minimum is 21 mm. Once a disc reaches minimum thickness it must be replaced, not resurfaced.
Fitment guidance
Fits the 1.5 TSI cars, which run the 300 mm front disc: Virtus GT Line, Taigun GT DSG, Slavia 1.5 and Kushaq 1.5. It does not fit the 1.0 TSI, which uses a smaller 276 mm disc. Send us your registration or chassis number and we will confirm the right part before you order.
Good to know
Fit new pads along with new discs, and bed them in gently for the first 200 km. Drilled and slotted discs usually wear pads a little faster and can be slightly noisier than plain discs. That is normal for this type of disc.
Buying this part
GST-inclusive pricing with a proper invoice, shipped across India. Dispatch in 1 to 2 business days.
Sizes are for the OE-equivalent disc (VW 5QP615301B / Brembo 09.F222.11). Images 1 to 4 are rendered from photos of the disc; image 5 is a real photo.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Rs. 11,999.00
No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000