Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Every litre of petrol sold in India has been E20 since 1 April 2026. Liqui Moly E20 Additive is made for exactly that fuel. It offsets the power loss that comes with higher ethanol content, keeps injectors and intake valves clean, and protects the fuel system against the water that ethanol pulls in.
Genuine Liqui Moly, made in Germany. Article number 23223. One 150 ml can treats 40 litres of petrol.
What it does
Wins back lost response. Liqui Moly formulated it to compensate for the power loss caused by fuel with raised ethanol content, up to E20.
Keeps injectors clean. Removes deposits from direct-injection (GDI) injectors and from the intake valves on port-injected engines, so the fuel spray stays even.
Handles the water. Ethanol absorbs moisture from the air. The additive prevents fuel-water emulsions and adds corrosion protection for the tank, lines and injectors.
Keeps stored fuel fresh. Antioxidants stabilise the fuel, which matters on a bike or car that stands between rides.
Safe for your fuel system. Compatible with the materials used in engines and fuel systems.
How much to use
The dose is 15 ml for every 4 litres of petrol, so a full 150 ml can treats 40 litres.
Scooter or commuter bike, 5 to 10 litre tank · about 20 to 40 ml · one can lasts 4 to 7 fills
Royal Enfield, KTM, Pulsar and similar, 12 to 15 litre tank · about 45 to 55 ml, roughly a third of the can · one can lasts about 3 fills
Hatchback, sedan or compact SUV, 35 to 45 litre tank · the full can per tank
A little over the dose does no harm. Close the cap firmly between uses on a bike.
How to use
Pour the dose into the tank just before you fill up, using the filler spout supplied on the can. The incoming petrol mixes it for you, with no shaking or measuring jug needed.
How often? Liqui Moly does not set a fixed interval. For full protection, dose at every fill. At the very least, dose the tank before a vehicle stands for more than a couple of weeks, because that is when ethanol does its damage.
Will it suit my vehicle?
It is for petrol engines only, 2-stroke and 4-stroke, in motorcycles, scooters, cars and light commercial vehicles. The can is also marked for hybrid petrol engines. Do not use it in a diesel.
Made before April 2023, and especially BS3 or BS4: your vehicle was not designed for E20, so this is the one we would treat as essential.
Made from April 2023 onward: the fuel system is certified for E20, but the fuel still absorbs moisture and leaves deposits. The additive keeps injectors clean and the tank dry.
Not sure where your vehicle falls? Our guide explains how to check if your vehicle is E20 compliant, or send us your model and year.
Just the additive, or a kit?
This can on its own is the core protection. If you also want to clean out deposits that have already built up, we have put it together with matching Liqui Moly products:
E20 Starter Kit · E20 Additive + Gasoline System Cleaner, for cars and bikes
E20 Protection Kit for Motorcycles · E20 Additive + 4T Shooter + Speed Shooter, sized for a bike tank
E20 Protection Kit for Cars · E20 Additive + Gasoline System Cleaner + Octane Booster
Common questions
Will it bring my mileage back?It helps the engine burn E20 cleanly and keeps the injectors spraying properly, which recovers the losses caused by deposits and poor running. It cannot change the fact that ethanol holds less energy per litre than petrol, so expect smoother running and better response rather than a return to your old pre-E20 figure.
Can I use it with other additives?Yes. Our kits pair it with the Liqui Moly Gasoline System Cleaner, Octane Booster and the motorcycle shooters.
Is a can enough for my car?One can treats 40 litres, which is a full tank on most hatchbacks, sedans and compact SUVs.
Will it fix cracked fuel hoses?No. An additive protects the fuel and the metal parts, but rubber that has already hardened or cracked needs replacing with ethanol-resistant line. Our E20 protection guide covers the full routine.
Specifications
Brand · Liqui Moly, made in Germany
Article number · 23223
Content · 150 ml metal can with filler spout
Treats · 40 litres of petrol (15 ml per 4 litres)
For · 2-stroke and 4-stroke petrol engines, cars, light commercial vehicles and motorcycles
Handle with care: harmful if swallowed and can cause serious eye damage. Keep out of reach of children and wash your hands after use.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Gasoline Engine System Cleaner is a thorough one-tank cleaner for the whole petrol fuel system. It clears deposits from injectors, intake valves and the combustion chamber, restoring smooth running, response and economy, and works on modern turbocharged and direct-injection engines.
What it does
Removes deposits from injectors, intake valves and combustion chamber
Restores throttle response, smooth idle and fuel economy
Suitable for turbocharged and direct-injection petrol engines
How to use
Add the full bottle to the petrol tank. One 300 ml can treats a standard tank. Safe for catalytic converters.
Specifications
Article number: 21492
Also known as: Motorsystemreiniger Benzin, Benzin System Reiniger
Content: 300 ml
Use in: petrol engines
Fitment guidance
For petrol engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Injection Cleaner clears carbon and deposits from petrol injectors and improves fuel atomisation. It is the simple fix for the symptoms of a dirty fuel system, hard starting, misfire, rough idle and hesitation, added straight to the tank.
What it does
Removes deposits from petrol injectors and the fuel system
Improves fuel atomisation and combustion
Smooths idle and addresses hard starting and misfire
How to use
Add to the petrol tank. One 300 ml bottle treats up to 80 litres of fuel. Safe for catalytic converters.
Specifications
Article number: 2522
Content: 300 ml
Treatment: up to 80 L of petrol
Use in: petrol engines
Fitment guidance
For petrol engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Top Tec ATF 1200 is a fully synthetic automatic transmission fluid for modern automatic gearboxes. It delivers smooth, consistent shifting with excellent corrosion protection and stable friction behaviour over a long service life.
What it does
Smooth, precise shifting and stable friction characteristics
Excellent oxidation and corrosion protection for a long fluid life
Reliable performance across a wide temperature range
Specifications
Article number: 3681
Content: 1 L
Type: fully synthetic automatic transmission fluid
Fitment guidance
Automatic transmission fluids must match the exact specification your gearbox requires. Always confirm the correct ATF for your vehicle, the full current specification is printed on the pack. Tell us your car and gearbox and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
The original Liqui Moly MoS2 Oil Additive carries solid molybdenum disulfide into the oil circuit, where it bonds to wear surfaces and lays down a tough, low-friction film. A long-running favourite for owners who want quieter, smoother engines and added protection in older or hard-worked motors.
What it does
Builds a MoS2 sliding film that reduces friction and wear
Provides emergency-running protection if oil supply is briefly interrupted
Miscible with all commercial mineral and synthetic motor oils
How to use
Add to the engine oil. One 200 ml bottle treats roughly 5 litres of oil. Best added at an oil change.
Specifications
Article number: 7178
Content: 200 ml
Use in: 4-stroke petrol and diesel engines
Fitment guidance
Intended for car and 4-stroke petrol or diesel engines. Not recommended for motorcycles with an oil-bath wet clutch. If unsure, reach out and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Liqui Moly Brake Fluid DOT 4 is a synthetic brake fluid based on glycol ethers, alkyl polyglycols, and glycol ether esters, designed for reliable braking performance in both cars and motorcycles across all operating conditions. It is suited for disc and drum brake systems, hydraulic clutch systems, and ABS-equipped vehicles where a DOT 4 specification fluid is prescribed.
The formulation carries a high wet and dry boiling point, maintaining safe braking performance even after moisture absorption over extended use. Built-in corrosion inhibitors protect metallic brake components and reduce oxidation at elevated temperatures, while special moisture scavengers actively resist the formation of vapour bubbles that can compromise pedal feel and stopping power.
Manufactured in Germany and approved to FMVSS 116 DOT 3, FMVSS 116 DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, SAE J 1703, and SAE J 1704.
KEY FEATURES
High wet and dry boiling point ensures consistent brake pedal feel and reliable stopping power even after moisture absorption over time.
Corrosion inhibitors protect metallic brake components and reduce oxidation under sustained high-temperature conditions.
Moisture scavengers actively resist vapour bubble formation, preventing brake fade caused by fluid aeration.
Compatible with disc brakes, drum brakes, hydraulic clutch systems, and ABS brake systems.
Broad approval coverage across FMVSS, ISO, and SAE standards, making it suitable for a wide range of vehicles.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Coolant Ready Mix RAF 12+ is a ready-to-use engine coolant, no dilution needed. Built on OAT technology, it protects the cooling system against overheating, freezing and corrosion, and suits modern petrol and diesel engines with aluminium cooling systems.
What it does
Protects against overheating, freezing and corrosion
OAT technology, suitable for aluminium cooling systems
Ready to use straight from the bottle, no mixing required
Specifications
Article number: 6924
Type: ready-mix OAT coolant / antifreeze
Suitable for: systems requiring a G12+ class coolant
Fitment guidance
Use only a coolant that matches your vehicle's required specification and colour, mixing incompatible coolants can cause problems. Confirm the correct coolant before topping up, the full current specification is printed on the pack. Tell us your car and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Radiator Cleaner flushes the cooling system before a coolant change, dissolving scale, sludge and oily residue that build up over time and restrict cooling. A clean system runs cooler and the fresh coolant works as it should.
What it does
Removes lime scale, sludge and oily residue from the cooling system
Restores cooling efficiency and coolant flow
Compatible with all conventional coolant additives and antifreeze
How to use
Add to the coolant and run the engine to operating temperature as directed, then drain and refill with fresh coolant. 300 ml treats up to 10 litres of coolant (1:33).
Specifications
Article number: 1804
Content: 300 ml
Treatment: up to 10 L of coolant
Use in: water-cooled engine cooling systems
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
The Motorbike Performance Pack is a complete one-box maintenance treatment for 4-stroke motorcycles, bringing together three Liqui Moly shooters for a clean engine and crisp fuelling at an oil change. The easy way to give your bike the full Liqui Moly treatment in a single step.
What is included
Engine Flush Shooter (80 ml): cleans the engine internals before draining the old oil
4T Shooter (80 ml): cleans the fuel system and combustion chamber
MoS2 Shooter (20 ml): adds an anti-friction film to the fresh oil
How to use
At an oil change: add the Engine Flush Shooter to the warm old oil and idle, then drain. Fill with fresh oil and add the MoS2 Shooter. Pour the 4T Shooter into a tank of petrol. Follow the directions on each bottle.
Specifications
Article number: 34207
Contents: 80 ml + 80 ml + 20 ml
Use in: 4-stroke motorcycles and scooters
Fitment guidance
For 4-stroke petrol motorcycles. If your bike has an oil-bath wet clutch, confirm an oil additive is permitted for your model before using the MoS2 Shooter. Tell us your bike and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Rubber Care protects and revives the rubber around your car. It keeps door seals, weather strips and window rubbers supple, restores elasticity to parts that have started to harden, and leaves a clean, non-sticky protective film that guards against cracking and sticking in heat and cold.
What it does
Protects and conditions all types of rubber components
Restores elasticity to brittle, weathered rubber
Stops door seals freezing or sticking, leaves a non-sticky finish
How to use
Clean the rubber, then apply an even film with the sponge applicator or a cloth and let it absorb.
Specifications
Article number: 23005
Content: 500 ml
Use on: door seals, weather strips and rubber trim
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Diesel Engine System Cleaner is a thorough one-tank clean for the diesel fuel system. It removes carbon build-up from injectors and the combustion chamber, restores fuel atomisation and reduces emissions, while remaining safe for catalytic converters and diesel particulate filters.
What it does
Cleans injectors and key diesel fuel-system components
Restores atomisation and reduces emissions
Safe for catalytic converters and DPFs
How to use
Add the full bottle to the diesel tank. One 300 ml can treats a standard tank.
Specifications
Article number: 21623
Also known as: Motorsystemreiniger Diesel
Content: 300 ml
Use in: diesel engines
Fitment guidance
For diesel engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Octane Booster raises the octane number of petrol and cleans the fuel system in one shot. Higher octane means stronger, more controlled combustion, better throttle response and protection against knocking, useful for performance petrol cars and bikes running on ordinary pump fuel.
What it does
Increases the octane rating of petrol for better combustion
Cleans the fuel system as it works
Improves response and protects against knock under load
How to use
Add to the petrol tank before refuelling. Safe for catalytic converters. Dose as directed on the pack.
Specifications
Article number: 21616
Content: 200 ml
Use in: petrol cars and motorcycles
Fitment guidance
For petrol engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Klima Refresh is a quick, fully automatic air-conditioning refresh. One small can discharges through the cabin and AC system to clean and neutralise the source of stale, musty smells, leaving the interior fresh in minutes.
What it does
Cleans and disinfects the AC system and cabin air path
Eliminates odours caused by bacteria and mould
Fast, automatic application with no dismantling
How to use
Set the AC to recirculate with the blower running, place the can inside the cabin, trigger it and leave the car closed as directed.
Specifications
Article number: 21465
Content: 75 ml
Use on: vehicle air-conditioning systems
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Motorbike MoS2 Shooter adds molybdenum disulfide to your motorcycle engine oil, laying down a low-friction film on wear surfaces for smoother running and added protection. A small 20 ml shot dosed for a single oil fill.
What it does
Builds a MoS2 sliding film that reduces friction and wear
Promotes smoother engine and gearbox operation
Adds emergency-running protection under high load
How to use
Add one 20 ml bottle to the engine oil at an oil change.
Specifications
Article number: 3444
Content: 20 ml
Use in: 4-stroke motorcycle engines
Fitment guidance
Formulated for motorcycle engines. If your bike runs an oil-bath wet clutch, confirm that an oil additive is permitted for your model before use. Tell us your bike and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Motorbike 4T Shooter is a one-shot fuel-system additive for 4-stroke motorcycles. Pour one bottle into a tank of petrol and it cleans the injectors or carburettor and combustion chamber, restores smooth fuelling and protects the system against corrosion. An easy, low-cost habit at every few fill-ups, and especially useful with today's ethanol-blended petrol.
What it does
Removes deposits from the fuel system and combustion chamber
Restores crisp throttle response and smooth idling
Protects against corrosion, including from ethanol-blended fuel
Works with both carburettor and fuel-injection systems
How to use
Add the full 80 ml bottle to a full tank of petrol. Use regularly for ongoing cleanliness. Safe for catalytic converters.
Specifications
Article number: 7822
Content: 80 ml
Use in: 4-stroke petrol motorcycles
Fitment guidance
For 4-stroke petrol motorcycles. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Motorbike 4T Synth 10W-50 Street Race is a fully synthetic, high-performance engine oil for modern 4-stroke motorcycles ridden hard. The 10W-50 grade holds its film at high revs and high oil temperatures, which makes it a favourite for KTM Duke and Adventure, sport bikes and air or oil-cooled twins worked in Indian heat and traffic.
What it does
Fully synthetic protection that stays stable at high engine speeds and temperatures
Shear-stable film for low wear and consistent oil pressure
Optimised for wet clutches, giving clean engagement and smooth gear shifts
Low oil consumption and excellent engine cleanliness
Specifications
Article number: 1502
Also written: 10w50, SAE 10W-50
Viscosity: SAE 10W-50
Content: 1 L
Meets / suitable for: API SN; JASO MA2 (wet-clutch compatible)
Fitment guidance
For 4-stroke motorcycles specifying a 10W-50 / JASO MA2 oil. Check the grade and oil quantity in your owner's manual. Tell us your bike and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Engine Flush Plus is a pre-oil-change cleaner that dissolves sludge, varnish and combustion deposits while the old oil is still in the engine, so the muck drains out with it. Run it before every oil change to start the new oil on a genuinely clean engine.
What it does
Dissolves oil sludge and deposits and holds them in suspension for draining
Helps free sticking piston rings and hydraulic valve lifters
Restores clean oilways so fresh oil circulates and protects properly
How to use
Add to the warm engine oil before draining. Let the engine idle for 10 to 15 minutes, do not rev or drive, then drain the oil and change the filter. One 300 ml can treats up to 5 litres of engine oil.
Specifications
Article number: 2657
Content: 300 ml
Treatment: up to 5 L of engine oil
Use in: 4-stroke petrol and diesel engines
Fitment guidance
Suitable for petrol and diesel car engines. If unsure whether to use a flush on a high-mileage engine, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen 5W-30 carries Liqui Moly's Molygen anti-friction technology in a fuel-economy 5W-30 grade. It keeps modern petrol and diesel engines clean and well protected while reducing internal friction for smoother running.
What it does
Molygen friction-modifier network reduces wear and supports fuel efficiency
Outstanding engine cleanliness over the service interval
Reliable cold-start flow and stable high-temperature protection
Specifications
Article number: 9047
Also written: 5w30, SAE 5W-30
Viscosity: SAE 5W-30
Content: 1 L
Meets / suitable for: API SN; ACEA A3/B4
Fitment guidance
For petrol and diesel engines specifying a 5W-30 of this performance level. Always confirm the exact grade and approval your engine requires before use. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Special Tec DX1 5W-30 in the 4-litre service pack, sized for a complete oil change on most modern petrol cars. This fully synthetic, low-friction oil is the right modern fill for many Maruti Suzuki, Hyundai, Kia, Tata and GM petrol models that call for a dexos1 Gen 2 grade.
What it does
Fully synthetic 5W-30 with a low-friction additive package for smooth cold starts and lower fuel consumption
Keeps the engine clean and protected over extended oil-change intervals
Excellent thermal and shear stability for stop-go traffic and hot conditions
Specifications
Article number: 20968
Also written: 5w30, SAE 5W-30
Viscosity: SAE 5W-30
Content: 4 L
Meets / suitable for: GM dexos1 Gen 2, API SP, ILSAC GF-6A
Fitment guidance
Use where a dexos1 Gen 2 / API SP / ILSAC GF-6A 5W-30 is specified. Always check the grade and approval in your owner's manual. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Motorbike Engine Flush Shooter cleans the inside of a 4-stroke motorcycle engine just before an oil change. Added to the old oil, it loosens sludge, varnish and deposits so they drain away, leaving clean oilways for the fresh oil. A 20 to 30 rupee step that meaningfully improves every oil change.
What it does
Dissolves sludge and deposits and carries them out with the old oil
Helps free sticking rings and keeps oil passages clear
Lets fresh oil deliver its full protection from the first km
How to use
Add one 80 ml bottle to the warm engine oil before draining. Let the engine idle for around 10 minutes, do not rev or ride, then drain the oil and change the filter.
Specifications
Article number: 20597
Content: 80 ml
Use in: 4-stroke motorcycle engines
Fitment guidance
For 4-stroke motorcycle engines. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Top Tec 4100 5W-40 is a premium, low-friction synthetic engine oil for modern petrol and diesel cars, in a 1-litre pack for top-ups or to complete a fill alongside the 5-litre service pack. It keeps engines exceptionally clean, protects over long drain intervals and suits a wide range of European vehicles.
What it does
Outstanding engine cleanliness and high lubrication reliability
Strong protection over extended oil-change intervals
Stable across a wide operating temperature range
Specifications
Article number: 9510
Also written: 5w40, SAE 5W-40
Viscosity: SAE 5W-40
Content: 1 L
Meets / suitable for: API SN; ACEA C3; VW 502 00 / 505 00 / 505 01; MB-Approval 229.51; BMW Longlife-04; Porsche C30
Fitment guidance
For petrol and diesel engines specifying a 5W-40 of this class. Always confirm the grade and approval your engine requires. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
The simplest way to start protecting a petrol engine from ethanol-blended fuel. Two bottles from Liqui Moly's German-made petrol range: one to clean what E20 has already left behind, one to keep it from coming back.
What is in the kit
Liqui Moly Gasoline Engine System Cleaner, 300 ml. The reset. Clears carbon from injectors, intake valves and the combustion chamber so fuelling returns to how it was designed to be.
Liqui Moly E20 Additive, 150 ml. The maintenance dose. Formulated for ethanol-blended petrol, it protects the fuel system against corrosion and deposits and keeps water in the fuel under control.
How to use it
Add the Gasoline Engine System Cleaner to a near-full tank and drive it out. From the next tank onward, run the E20 Additive every second or third fill.
Suitability
For petrol cars, motorcycles and scooters running pump fuel, including E10 and E20 blends. Not for diesel engines. Dosage for each bottle is printed on the pack. Contact us if you want fitment guidance for your vehicle.
Buying the pair together costs less than buying them separately.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Two-wheelers feel E20 first. Smaller tanks, longer standing time and simpler fuel systems mean ethanol-blended petrol shows up as a rough idle, a lazy throttle and mileage that quietly slips. This kit is the routine that holds it back, built from Liqui Moly's German-made motorcycle range.
What is in the kit
Liqui Moly E20 Additive, 150 ml. Formulated for ethanol-blended petrol. Protects the fuel system against the corrosion and deposits that come with E20, and keeps water in the fuel under control.
Liqui Moly Motorbike 4T Shooter, 80 ml. One bottle per tank. Cleans injectors and the fuel system on four-stroke motorcycles and restores smooth running.
Liqui Moly Motorbike Speed Shooter, 80 ml. The performance shot. Sharpens throttle response and combustion on a single tank.
How to use it
Run the 4T Shooter first on a full tank to clean. Follow with the Speed Shooter on the next tank. Then keep the E20 Additive as your routine dose every second or third fill.
Suitability
For four-stroke petrol motorcycles and scooters, carburetted or fuel injected, running pump petrol including E10 and E20 blends. Not for two-stroke premix. Dosage for each bottle is printed on the pack. Contact us if you want fitment guidance for your bike.
Worth adding. Ethanol is hard on rubber and on the spark plug's working life. Pair this kit with an iridium plug and a fuel-line inspection every one to two months.
Buying the three together costs less than buying them separately.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
India's petrol now carries ethanol up to E20. Ethanol attracts moisture, lifts deposits and dulls the way a petrol engine picks up. This kit is the three-part answer, built from Liqui Moly's German-made petrol range.
What is in the kit
Liqui Moly E20 Additive, 150 ml. Formulated for ethanol-blended petrol. Protects the fuel system against the corrosion and deposits that come with E20, and keeps water in the fuel under control.
Liqui Moly Gasoline Engine System Cleaner, 300 ml. The deep clean. Clears carbon from injectors, intake valves and the combustion chamber so fuelling returns to how it was designed to be.
Liqui Moly Octane Booster, 200 ml. Raises the octane number for stronger, more controlled combustion and better anti-knock behaviour.
How to use it
Start with the Gasoline Engine System Cleaner on a near-full tank to clear existing deposits. Follow with the Octane Booster on the same or next tank. Then run the E20 Additive as your routine dose at every second or third fill to hold the fuel system clean.
Suitability
For petrol cars running pump fuel, including E10 and E20 blends. Not for diesel engines. Dosage for each bottle is printed on the pack. If you are unsure which additive suits your car, contact us for fitment guidance.
Buying the three together costs less than buying them separately.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Rs. 3,533.00 Rs. 3,279.00
↓ You save Rs. 254.00
Genuine Liqui Moly from Germany: fully synthetic engine oils for cars and motorcycles, plus the additives, shooters and care products that keep them running clean. Engineered protection, sold and supported by Rawtorque.
No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000