Brembo | Rawtorque

Brembo L04210 is a fully synthetic DOT 4 brake fluid, low viscosity, supplied in a 1 litre bottle.Low viscosity fluid stays thinner at low temperature, which lets ABS and stability control systems move fluid quickly in cold conditions. Where a car specifies a low viscosity fluid, a standard one is not a substitute.The figures below are the minimums the DOT 4 standard itself requires, not measured values for this bottle.Specification Part number L04210 Standard DOT 4 Volume 1 litre Type Fully synthetic, glycol ether based Minimum dry boiling point for this standard 230 °C Minimum wet boiling point for this standard 155 °C Viscosity class Low viscosity Brake fluid is hygroscopic, meaning it absorbs moisture from the air over time, and that moisture lowers its boiling point long before the fluid looks dirty. Most manufacturers specify a change every two years regardless of mileage. Never mix a glycol-based fluid with DOT 5 silicone fluid, and never reuse fluid that has been opened and left standing.Which fluid does my car takeThe required specification is printed on your brake fluid reservoir cap and in the owner's handbook. A fluid meeting a higher DOT number may be used where a lower one is specified, but never the reverse. If you are unsure, send us your registration number and we will help you confirm it.Buying thisGST-inclusive pricing with a proper invoice, shipped across India.

Read more less

Brembo P85200 is a front-axle brake pad set from Brembo's Prime range for the Skoda & VW, measuring 148 mm wide, 56 mm tall and 19 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 148 mm Height 56 mm Thickness 19 mm WVA number 26992,26991 Backplate Black, painted Accessories Anti-squeal shim, brake caliper bolts Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584132852 This set does not have a wear indicator built into the pad. If your Skoda & VW uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo L05010 is a fully synthetic DOT 5.1 brake fluid, supplied in a 1 litre bottle.The figures below are the minimums the DOT 5.1 standard itself requires, not measured values for this bottle.Specification Part number L05010 Standard DOT 5.1 Volume 1 litre Type Fully synthetic, glycol ether based Minimum dry boiling point for this standard 260 °C Minimum wet boiling point for this standard 180 °C Brake fluid is hygroscopic, meaning it absorbs moisture from the air over time, and that moisture lowers its boiling point long before the fluid looks dirty. Most manufacturers specify a change every two years regardless of mileage. Never mix a glycol-based fluid with DOT 5 silicone fluid, and never reuse fluid that has been opened and left standing.Which fluid does my car takeThe required specification is printed on your brake fluid reservoir cap and in the owner's handbook. A fluid meeting a higher DOT number may be used where a lower one is specified, but never the reverse. If you are unsure, send us your registration number and we will help you confirm it.Buying thisGST-inclusive pricing with a proper invoice, shipped across India.

Read more less

Brembo P83082 is a front-axle brake pad set from Brembo's Prime range for the Toyota COROLLA NEW ALTIS PETROL ONLY, measuring 139 mm wide, 56 mm tall and 18 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 139 mm Height 56 mm Thickness 18 mm Braking system Akebono WVA number 24336 FMSI D1210 8330 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584062203 This set does not have a wear indicator built into the pad. If your Toyota COROLLA NEW ALTIS PETROL ONLY uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Toyota COROLLA NEW ALTIS PETROL ONLY. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P79008 is a front-axle brake pad set from Brembo's Prime range for the Maruti/Suzuki JIMNY NEW, measuring 117 mm wide, 46 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 117 mm Height 46 mm Thickness 15 mm Braking system Akebono WVA number 21907,21909,21908 FMSI D556 7435, D807 7680 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584057285 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Maruti/Suzuki JIMNY NEW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P85121X is a front-axle brake pad set for the Skoda & VW, measuring 131 mm wide and 52 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 131 mm Thickness 18 mm Height 52 mm Braking system TRW WVA number 25681,25682 FMSI D1776 9006 Wear indicator Without Accessories With accessories With brake caliper bolts With anti-squeal shim Axle Front EAN code 8020584121955 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P16013X is a front-axle brake pad set for the Maruti Baleno 2023 and Baleno RS, measuring 126 mm wide and 52 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 126 mm Thickness 17 mm Height 52 mm Braking system Lucas WVA number 24283,24285,24284 FMSI D1454 8948 Wear indicator Acoustic Accessories With anti-squeal shim With accessories Axle Front and rear EAN code 8020584114933 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Maruti Baleno 2023 and Baleno RS. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P86029 is a rear-axle brake pad set from Brembo's Prime range for the Jaguar, Landrover & Volvo, measuring 122 mm wide, 56 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front and rear Width 122 mm Height 56 mm Thickness 16 mm Braking system Teves WVA number 22141,22142 FMSI D1821 9057 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584087282 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Jaguar, Landrover & Volvo. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P28089 is a rear-axle brake pad set from Brembo's Prime range for the Honda New civic from 2019 onwards, measuring 123 mm wide, 48 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Rear Width 123 mm Height 48 mm Thickness 15 mm Braking system Teves WVA number 22429,22430,22431 FMSI D1878 9106, D1878 9334 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584084281 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Honda New civic from 2019 onwards. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P28039 is a rear-axle brake pad set from Brembo's Prime range for the Honda & Maruti/Suzuki, measuring 89 mm wide, 48 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Rear Width 89 mm Height 48 mm Thickness 15 mm Braking system Nissin WVA number 23736,23653,23652 FMSI D536 7418, D537 7418 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584059753 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Honda & Maruti/Suzuki. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P83170 is a front-axle brake pad set from Brembo's Prime range for the Toyota Innova Crysta, measuring 145 mm wide, 56 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 145 mm Height 56 mm Thickness 16 mm Braking system Advics WVA number 22643 FMSI D2006 9236 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584113073 This set does not have a wear indicator built into the pad. If your Toyota Innova Crysta uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Toyota Innova Crysta. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P79028 is a front-axle brake pad set from Brembo's Prime range for the Maruti/Suzuki & Nissan, measuring 142 mm wide, 59 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 142 mm Height 59 mm Thickness 17 mm Braking system Akebono WVA number 25202 FMSI D1338 8449, D1374 8449 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584104910 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Maruti/Suzuki & Nissan. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P79023 is a front-axle brake pad set from Brembo's Prime range for the Maruti/Suzuki SWIFT all models/Ritz/Astar/NewBaleno/Dezire, measuring 109 mm wide, 45 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 109 mm Height 45 mm Thickness 16 mm Braking system Jiangxi Wa WVA number 25181,23962,23963 FMSI D1614 8827 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584103760 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Maruti/Suzuki SWIFT all models/Ritz/Astar/NewBaleno/Dezire. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P54030 is a front-axle brake pad set from Brembo's Prime range for the Mitsubishi OUTLANDER II (2006 - 2012), Cedia, measuring 145 mm wide, 55 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 145 mm Height 55 mm Thickness 16 mm Braking system Akebono WVA number 23584 FMSI D866 7741 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584054772 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Mitsubishi OUTLANDER II (2006 - 2012), Cedia. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P36031 is a front-axle brake pad set from Brembo's Prime range for the Jaguar F pace, ipace, measuring 180 mm wide, 78 mm tall and 18 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 180 mm Height 78 mm Thickness 18 mm Braking system Teves WVA number 22303,22302 FMSI D1861 9090 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584103678 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Jaguar F pace, ipace. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P28035 is a front-axle brake pad set from Brembo's Prime range for the Honda New civic from 2019 onwards, CRV II and Accord 2003 to 2008, measuring 142 mm wide, 57 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 142 mm Height 57 mm Thickness 17 mm Braking system Akebono WVA number 23869,23870,23868 FMSI D914 7795, D943 7844, D958 7795 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584052693 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Honda New civic from 2019 onwards, CRV II and Accord 2003 to 2008. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo 09E66111 is a front-axle brake disc for the Maruti/Suzuki New Swift/Baleno/Dezire, measuring 231 mm diameter and 17 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 231 mm Thickness 17 mm Minimum thickness 15 mm Height 40 mm Bolt holes 4 Centering bore 60 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584320655 New thickness is 17 mm and the manufacturer's minimum is 15 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Maruti/Suzuki New Swift/Baleno/Dezire. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo P06041 is a front-axle brake pad set from Brembo's Prime range for the BMW 3 SERIES E90 320d (2005 - 2010) / 3 SERIES E90 320i, measuring 165 mm wide, 74 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 165 mm Height 74 mm Thickness 17 mm Braking system Brembo WVA number 24316 FMSI D1371 8483 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584059890 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the BMW 3 SERIES E90 320d (2005 - 2010) / 3 SERIES E90 320i. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P23139 is a front-axle brake pad set from Brembo's Prime range for the Fiat ABARTH 595, measuring 125 mm wide, 71 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 125 mm Height 71 mm Thickness 15 mm Braking system Brembo WVA number 24687,25225,24162 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Electric sensor contact on the pad Approval ECE R90 type-approved EAN code 8020584108789 These pads are built for an electric wear sensor. The sensor itself is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Fiat ABARTH 595. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P06042 is a front-axle brake pad set from Brembo's Prime range for the BMW X3 E83 (2004 - 2010), measuring 155 - 156 mm wide, 64 mm tall and 20 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 155 - 156 mm Height 64 mm Thickness 20 mm Braking system Teves WVA number 21676,23474 FMSI D946 7592 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584059906 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the BMW X3 E83 (2004 - 2010). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo 09492810 is a front-axle brake disc for the Mercedes, measuring 300 mm diameter and 27.8 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 300 mm Thickness 27.8 mm Minimum thickness 25.4 mm Height 68 mm Bolt holes 5 Centering bore 80 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584492819 New thickness is 27.8 mm and the manufacturer's minimum is 25.4 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mercedes. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo P85087 is a front-axle brake pad set from Brembo's Prime range for the Audi Old A8 / Bentley, measuring 193 mm wide, 73 mm tall and 21 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 193 mm Height 73 mm Thickness 21 mm Braking system Teves WVA number 23885,23897 FMSI D1117 7928 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Electric sensor contact on the pad Approval ECE R90 type-approved EAN code 8020584059739 These pads are built for an electric wear sensor. The sensor itself is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Audi Old A8 / Bentley. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo 09D93311 is a front-axle brake disc for the Porsche BOXSTER S 981, measuring 340 mm diameter and 34 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 340 mm Thickness 34 mm Minimum thickness 32 mm Height 69 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Assembly side Right Axle Front right Units per box 1 EAN code 8020584312766 New thickness is 34 mm and the manufacturer's minimum is 32 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche BOXSTER S 981. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo P36025 is a front-axle brake pad set from Brembo's Prime range for the Jaguar F type V6, measuring 193 mm wide, 79 mm tall and 18 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 193 mm Height 79 mm Thickness 18 mm Braking system Teves WVA number 24474,24475 FMSI D1448 8616 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584103166 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Jaguar F type V6. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less