Classic 350 Exhaust

Valvetronic Exhaust Module Switch Control Automatic (Electric) The Valvetronic Exhaust Module Switch Control Automatic (Electric) is an electronic control unit intended to operate exhaust systems that use an internal exhaust valve to regulate exhaust gas flow. Valved exhaust systems are designed to alter exhaust behaviour by opening or closing a valve within the exhaust path, allowing the system to shift between different sound and flow characteristics. In a typical valved exhaust setup, the exhaust valve controls how exhaust gases exit the system. When the valve remains closed, exhaust gases are routed through a more restrictive internal path, resulting in a quieter exhaust note and controlled gas flow. When the valve opens, exhaust gases are allowed to pass through a freer-flowing route, which increases exhaust sound output and reduces flow restriction. This module enables that valve movement to be controlled electronically using an electric actuator. Electronic Valve Control Concept This exhaust module replaces traditional manual cable mechanisms or vacuum-based exhaust valve systems with an electrically actuated control method. Instead of relying on mechanical cables or engine vacuum, the system uses electrical signals to control the opening and closing of the exhaust valve. By using electric actuation, the system allows more direct and consistent valve operation. The exhaust valve responds to electrical input rather than physical cable tension or vacuum pressure, reducing dependence on mechanical components that may stretch, degrade, or lose effectiveness over time. The control unit sends signals to the electric exhaust valve actuator, which physically moves the exhaust valve between open and closed positions. This process allows the user to manage exhaust behaviour through electronic switching rather than manual intervention. Exhaust Mode Switching The module is designed to allow switching between different exhaust valve positions. This switching enables the user to alternate between a quieter exhaust mode and a freer-flowing exhaust mode depending on preference or operating conditions. Some systems of this type may support an automatic control mode, where the valve position changes based on preset conditions such as engine speed or throttle input. Manual control is also possible through a wired push-button or switch interface. The exact operating behaviour depends on the configuration of the connected exhaust system and actuator. The module itself does not generate exhaust sound, alter exhaust piping, or modify internal exhaust construction. Its function is limited strictly to controlling the valve position within a compatible valved exhaust system. Installation & System Integration The Valvetronic Exhaust Module Switch Control Automatic (Electric) is presented as a plug-and-play style electronic module intended to integrate with compatible valved exhaust systems. Installation involves connecting the control unit to the electric exhaust valve actuator using the supplied wiring harness and connecting the module to an appropriate power source from the vehicle’s electrical system. Typical installation steps include: Mounting the control module securely on the vehicle Connecting the wiring harness to the exhaust valve actuator Installing the push-button or control switch in an accessible location Ensuring proper power supply and electrical grounding The product description does not indicate any requirement for permanent engine modification. However, because exhaust valve designs, wiring layouts, and electrical systems vary between vehicles and exhaust manufacturers, compatibility must be verified prior to installation. Professional installation is recommended for users who are not familiar with vehicle electrical systems or exhaust components. Intended Application This module is intended for use with exhaust systems that: Incorporate a valved exhaust mechanism Use or support electronic exhaust valve actuation The product is categorized as a universal aftermarket exhaust control module. It is not vehicle-specific by default. Fitment depends entirely on the exhaust valve type, actuator compatibility, electrical requirements, and available mounting space on the vehicle. The module does not replace an exhaust system, muffler, or exhaust valve. It functions solely as a control interface for an existing compatible valved exhaust setup. What’s Included Based on the product presentation and information provided, the package includes: Valvetronic Exhaust Module Switch Control unit Electric actuator interface and wiring harness Push-button control or switching interface Only components shown or explicitly implied are included. No additional adapters, exhaust valves, mounting brackets, or vehicle-specific hardware should be assumed unless specified by the seller. Compatibility & Important Notes This product functions only with compatible valved exhaust systems that support electronic valve control. Vehicle-specific compatibility is not guaranteed. Buyers must confirm: Exhaust valve type and actuation method Electrical compatibility with the control module Physical mounting feasibility Local noise regulations and road-use laws may apply depending on exhaust configuration and valve operation. Compliance with applicable regulations is the responsibility of the vehicle owner. Summary The Valvetronic Exhaust Module Switch Control Automatic (Electric) is an electronic exhaust valve control unit designed to operate compatible valved exhaust systems using electric actuation. It provides an alternative to mechanical or vacuum-based valve control by offering electronically managed exhaust valve operation. As a universal aftermarket module, careful compatibility verification is required before purchase and installation. The module does not modify exhaust hardware or create exhaust sound; it only controls valve position within a compatible exhaust system.

Read more less

Engineered specifically for the Royal Enfield Classic 350 Reborn platform, the Red Rooster Performance Polestar Pro Exhaust is expertly designed to enhance your riding experience. This exhaust system delivers a controlled, deep exhaust note that stands out without overpowering. It features improved flow characteristics for better engine breathing and long-term durability, ensuring consistent performance throughout its lifespan. Manufactured using high-grade SS304 stainless steel, the Polestar Pro exhaust reflects a commitment to quality. The material choice offers superior structural rigidity that helps withstand daily wear and tear. It is also highly resistant to heat and corrosion, giving riders peace of mind on long journeys and in varying weather conditions. The internal flow design of this exhaust supports smoother evacuation of exhaust gases. This improvement contributes to a more responsive throttle, ensuring you can rely on consistent mid-range power output. Despite the performance upgrades, the Polestar Pro retains excellent rideability, making it suitable for both city commutes and highway runs without compromise. Designed as a direct replacement unit, the exhaust maintains factory mounting points for hassle-free installation. This design perfectly balances the bike’s weight and overall aesthetics. Whether you use it for daily riding or long-distance travel, the Polestar Pro delivers a refined mechanical sound that complements the Classic 350 Reborn’s character without sounding harsh or uncontrolled. Fitment & Compatibility of the Red Rooster Polestar Pro Exhaust This exhaust is compatible exclusively with the Royal Enfield Classic 350 Reborn, powered by the J-Series engine. It is important to note that it is not compatible with older Classic 350 UCE models or any non-J-Series platforms. This careful targeting ensures the best possible fit and performance for the Roosters who choose this product. Owners of the Classic 350 Reborn can expect seamless integration with their bikes, ensuring a perfect match that enhances both aesthetics and functionality. The exclusive fitment guarantees the durability and reliability expected from a high-quality slip-on exhaust system built by Red Rooster. Red Rooster Polestar Pro Exhaust Specifications Brand: Red Rooster Performance Product Line: Polestar Pro Exhaust Type: Slip-on replacement Material: SS304 stainless steel Construction: Welded stainless steel body Finish Options: Black, Polish (variant-based) Weight: Approx. 3.01 kg Mounting Type: Direct bolt-on Heat Resistance: High Rust Resistance: Yes ECU Remap Required: No The strong construction of the exhaust ensures it withstands high temperatures and environmental exposure. Riders can choose between black or polished finishes, both offering excellent durability. These aesthetic options allow the roosters to customize their bikes while maintaining performance integrity. Weight is kept minimal at approximately 3.01 kg, so it does not negatively affect the bike’s handling. The direct bolt-on installation means there is no need for cutting or welding, making it accessible for all levels of mechanical skill. Notably, the Red Rooster exhaust does not require an ECU remap, simplifying installation and use. Installation Guide for Red Rooster Performance Polestar Pro Exhaust The Polestar Pro exhaust features direct bolt-on installation using factory mounting points. This approach eliminates the need for cutting, welding, or ECU tuning. Most riders will find the upgrade straightforward and convenient, enabling quick and clean fitting with basic tools. For best results, professional installation is recommended. This ensures optimal alignment, correct torque settings, and avoids potential installation errors. Proper mounting also preserves exhaust performance and sound quality while protecting the motorcycle's frame and components. What’s Included with the Red Rooster Polestar Pro Exhaust? 1 × Red Rooster Performance Polestar Pro Exhaust (selected finish variant) Required mounting hardware for direct installation Every unit includes all necessary hardware for a smooth mounting process. This inclusive package helps roosters avoid additional purchases or delays due to missing components. With everything on hand, the installation experience is as efficient as possible. The Red Rooster Polestar Pro Exhaust is designed for riders who demand quality, performance, and style. With its red detailing branding included subtly on the exhaust, this part attracts not just the roosters looking for improvement but anyone who appreciates engineering excellence. Upgrade your Classic 350 Reborn today to experience the perfect blend of sound, durability, and ease.

Read more less

The Red Rooster Rumbler is a performance-oriented slip-on exhaust developed for Royal Enfield’s classic UCE platforms. It is designed to deliver a deeper, fuller exhaust note while maintaining everyday rideability and long-distance reliability. Manufactured from SS304 stainless steel, the Rumbler prioritizes corrosion resistance and structural longevity. Unlike conventional exhausts that rely on glass wool, this unit uses ceramic wool packing, offering superior heat tolerance and slower sound degradation over time. The exhaust note remains consistent across extended usage, highway runs, and varying thermal conditions. The internal flow design is tuned to reduce exhaust restriction compared to the stock muffler, supporting improved throttle response and freer engine breathing. Red Rooster claims modest performance gains when used on an otherwise stock motorcycle, without requiring ECU remapping or engine modifications. The Rumbler is a bolt-on replacement that mounts directly to factory exhaust points, preserving serviceability and stock alignment. Multiple finish options are available and selectable as variants. Fitment & Compatibility As stated by the manufacturer, this exhaust is compatible with the following Royal Enfield models: Classic 350 Classic 500 Bullet 350 Bullet 500 Standard 350 Standard 500 Thunderbird 350 Thunderbird 500 Thunderbird X 350 Compatibility is listed as claimed by Red Rooster.

Read more less