Classic 350 Stage 1 Kit

N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 (Classic 350 / Meteor 350 / Hunter 350) The N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 is a performance-oriented replacement air filter crafted specifically for Royal Enfield motorcycles built on the J-platform. This includes popular models like the Classic 350, Meteor 350, and Hunter 350. Designed as a direct stock replacement, it boosts airflow efficiency while maintaining dependable filtration for everyday riding conditions. This Royal Enfield air filter ensures your engine breathes freely without compromising protection. Modern BS6 motorcycles depend on a precise air–fuel balance to offer smooth throttle response, consistent combustion, and long-term engine stability. The air filter plays a crucial role in this system, controlling both the volume and cleanliness of intake air entering the engine. The N-Gage Hyper Flow Air Filter improves intake airflow compared to standard disposable paper filters, while protecting the engine from dust, debris, and moisture. This is especially important for Indian riding environments where conditions can be harsh and unpredictable. Royal Enfield Air Filter with High-Flow Cotton Gauze Construction This Royal Enfield air filter is built using premium organic cotton gauze, layered and specially treated to allow greater airflow without sacrificing filtration performance. Unlike conventional paper filters, which restrict airflow over time as they collect dirt, cotton gauze filters maintain more consistent airflow when cleaned. Proper maintenance ensures longevity and consistent engine protection. The filter arrives factory pre-oiled, which helps trap fine dust particles effectively while still allowing increased air volume. This balance between airflow and filtration is essential for stable engine performance in all riding conditions, from stop-and-go city traffic to extended highway cruises. Designed Specifically for Royal Enfield J-Platform 350cc Engines The N-Gage Hyper Flow Air Filter fits precisely within the stock airbox of Royal Enfield’s J-platform 350cc engines. It installs as a direct replacement with no cutting, drilling, trimming, or modification needed. This makes upgrading your motorcycle’s filter simple and hassle-free. This air filter matches factory dimensions and mounting points, integrating seamlessly with the original intake system. This means riders can improve airflow without changing the motorcycle’s stock intake layout, sealing, or weather protection. These features enhance the bike’s reliability during daily use in varying conditions. Throttle Response and Ride Feel with the N-Gage Royal Enfield Air Filter Improved airflow contributes to smoother throttle response and more consistent power delivery across all rpm ranges. Many riders choose high-flow air filters to reduce intake restriction and help the engine breathe freer during acceleration and steady cruising. This Royal Enfield air filter is designed for riders seeking enhanced ride feel without complex modifications. According to manufacturer specifications, this air filter offers performance gains of up to 0.5 BHP under optimal conditions. However, real-world results may vary based on factors like riding style, maintenance habits, fuel quality, and overall engine condition. The filter works perfectly with the stock ECU and exhaust system and requires no ECU remapping or tuning adjustments. Reusable and Long-Term Ownership Benefits Unlike disposable paper filters that need frequent replacement, this N-Gage air filter is washable and reusable. Regular cleaning and re-oiling using appropriate maintenance products allow multiple reuses across the filter’s lifespan. This makes it an eco-friendly and cost-effective solution for riders. Choosing this filter supports long-term ownership goals, reducing consumable waste and maintaining consistent performance over time. Regular maintenance is vital to ensure continuous filtration efficiency and engine protection, especially in dusty or high-usage scenarios commonly faced by riders. Built for Real-World Indian Riding Conditions with the Royal Enfield Air Filter Indian roads often present challenges such as high dust levels, humidity, heavy monsoon rain, and temperature swings. The N-Gage Hyper Flow Air Filter is engineered to deliver consistent filtration across dust and rain conditions, making it ideal for daily commutes, highway tours, and mixed-use riding. This filter is compatible with BS6, Euro 4, and Euro 5 compliant models, meeting current emission norms while focusing equally on airflow efficiency and intake cleanliness. These attributes ensure your motorcycle maintains top performance while adhering to environmental regulations. Installation and Maintenance Guidance Installation of the filter follows the exact procedure as replacing a standard stock air filter and requires no special tools or technical know-how. Riders should follow recommended service intervals for inspection, cleaning, and re-oiling to maintain optimal performance and filtration consistency throughout the filter’s lifespan.

Read more less

Moto Torque Performance Air Filter for Royal Enfield Classic 350, Hunter 350 & Meteor 350 The Moto Torque Performance Air Filter for Classic 350, Hunter 350 & Meteor 350 is designed specifically for Royal Enfield’s 350cc J-series platform. Built as a direct replacement air filter, it is engineered to support consistent airflow and filtration for everyday riding conditions. This air filter uses a 4-layer high-flow cotton gauze construction, designed to allow air intake while maintaining filtration integrity. The multi-stage filtration design helps capture dust, dirt, and airborne contaminants without restricting airflow, supporting stable engine operation. The filter is built as a reusable and serviceable unit, allowing cleaning and reinstallation instead of frequent replacements. This helps maintain consistent performance over time while reducing maintenance requirements. Designed for regular riding environments, the Moto Torque air filter for Classic 350, Hunter 350 and Meteor 350 is constructed to handle heat and vibration associated with single-cylinder engines. The air filter is compatible with Royal Enfield motorcycles using the J-series 350 platform and installs as a direct replacement without modification. Specifications Brand: Moto TorqueCompatibility: Royal Enfield 350cc J-SeriesFilter Type: High-flow air filterFilter Material: Cotton gauze (4-layer)Design: Multi-stage filtrationReusable: Yes (washable and reusable)Installation: Direct replacement

Read more less

Royal Enfield Classic 350 Reborn Replica Exhaust Black – Moto Torque Product Description The Moto Torque Replica Exhaust for Royal Enfield Classic 350 Reborn (Black) is designed specifically for the Royal Enfield Classic 350 Reborn platform. This exhaust follows a replica-style design intended to maintain a traditional exhaust silhouette while offering a darker exterior finish. The Royal Enfield Classic 350 Reborn Replica Exhaust Black features an elongated exhaust body that closely resembles the stock exhaust profile used on Royal Enfield motorcycles. The black exterior finish provides a darker visual appearance compared to chrome exhaust variants. This exhaust is described as a performance-oriented replica exhaust and includes ceramic blanket insulation as part of its internal construction. The insulation forms part of the internal assembly of the exhaust unit. For riders looking to install a replica-style black exhaust specifically for the Royal Enfield Classic 350 Reborn, this Moto Torque exhaust provides a replacement exhaust option designed around the Classic 350 Reborn exhaust layout. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Motorcycle Compatibility: Royal Enfield Classic 350 Reborn Finish: Black Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Black Exhaust for Royal Enfield (BS6) – Black Finish Product Description The Moto Torque Replica Black Exhaust (BS6) is designed for riders who prefer a stock-style exhaust profile with a deeper bass tone while maintaining a dark exterior finish. The exhaust follows a replica-style design that closely resembles the traditional Royal Enfield exhaust layout. The Moto Torque Replica Black Exhaust BS6 is described as a performance-oriented exhaust and features ceramic blanket insulation as part of its internal construction. This insulation forms part of the exhaust assembly and supports the internal structure of the unit. The exhaust comes with a black finish, giving the motorcycle a darker exhaust appearance compared to chrome variants. The elongated replica-style body maintains the familiar exhaust silhouette commonly associated with Royal Enfield motorcycles. For riders looking for a replica-style black exhaust compatible with BS6 motorcycles, this Moto Torque Replica Black Exhaust provides a replacement exhaust option with ceramic insulation and a black exterior finish. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS6 Finish: Black Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Black Exhaust for Royal Enfield (BS4) – Black Finish Product Description The Moto Torque Replica Black Exhaust (BS4) is designed for riders who prefer a stock-style exhaust profile with a deeper bass tone while maintaining a dark finish. The exhaust follows a replica-style design that closely resembles the traditional Royal Enfield exhaust silhouette. Constructed as a performance-oriented exhaust, the Moto Torque Replica Black Exhaust BS4 features ceramic blanket insulation within its internal structure. The insulation forms part of the exhaust assembly and supports the internal configuration of the unit. The exhaust comes with a black finish, giving it a darker appearance compared to chrome variants while maintaining the long replica-style body design. The overall layout follows the familiar exhaust shape commonly associated with Royal Enfield motorcycles. For riders looking for a replica-style black exhaust compatible with BS4 motorcycles, this Moto Torque Replica Black Exhaust offers a replacement exhaust option with ceramic insulation and a black exterior finish. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS4 Finish: Black Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Chrome Exhaust for Royal Enfield (BS6) – Chrome Finish Product Description The Moto Torque Replica Chrome Exhaust (BS6) is designed for riders who prefer a stock-style exhaust appearance with a deeper bass tone. This exhaust follows a replica-style design that closely resembles the traditional Royal Enfield exhaust profile. The Moto Torque Replica Chrome Exhaust BS6 is described as a performance-oriented exhaust and is constructed with ceramic blanket insulation within its internal structure. The insulation forms part of the exhaust assembly and is intended to support the exhaust’s internal configuration. The exhaust features a chrome exterior finish, giving it a polished metallic appearance that complements classic motorcycle styling. The long replica design maintains the familiar silhouette associated with Royal Enfield exhaust systems. For riders looking for a replica-style chrome exhaust compatible with BS6 motorcycles, this Moto Torque Replica Chrome Exhaust offers a replacement exhaust option with ceramic insulation and chrome finish. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS6 Finish: Chrome Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Chrome Exhaust for Royal Enfield (BS4) – Chrome Finish Product Description The Moto Torque Replica Chrome Exhaust (BS4) is designed for riders who prefer a stock-style exhaust appearance with a deeper bass tone. This replica-style exhaust maintains the classic Royal Enfield exhaust look while offering a different sound character. The Moto Torque Replica Chrome Exhaust BS4 is described as a performance-oriented exhaust and is built with ceramic blanket insulation as part of its internal construction. The insulation forms a protective layer within the exhaust assembly. Finished in chrome, the exhaust maintains a polished appearance that complements motorcycles styled with classic or retro design elements. The elongated replica design closely follows the traditional exhaust form factor. For riders looking for a replica-style chrome exhaust for BS4 motorcycles, this Moto Torque Replica Chrome Exhaust provides a chrome-finished replacement exhaust option with insulated internal construction. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS4 Finish: Chrome Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

NGage Hyper Flow Air Filter for Royal Enfield UCE 350 & 500 – Washable Cotton Gauze Direct Replacement The NGage Hyper Flow Air Filter for Royal Enfield UCE 350 and UCE 500 is a reusable performance air filter element developed for Royal Enfield motorcycles built on the UCE (Unit Construction Engine) platform. This air filter is designed as a direct replacement for the stock paper air filter used in select Royal Enfield 350 cc and 500 cc models. This listing covers only the NGage Hyper Flow Air Filter specified for Royal Enfield UCE 350 and UCE 500 motorcycles, as shown on the manufacturer’s product page and compatibility panel. Designed for Royal Enfield UCE Engines NGage specifies this Hyper Flow Air Filter for motorcycles using the Royal Enfield UCE engine architecture. These engines were used across multiple Royal Enfield models in both 350 cc and 500 cc displacements. As per the compatibility list displayed on the product page, this air filter is suitable for the following motorcycles: Royal Enfield Classic 350 (UCE) Royal Enfield Thunderbird 350 Royal Enfield Bullet 350 Royal Enfield Electra 350 Royal Enfield Classic 500 Royal Enfield Thunderbird 500 Royal Enfield Bullet 500 This air filter is intended to replace the stock air filter element in the factory airbox of these motorcycles without modification. Hyper Flow Cotton Gauze Filter Construction NGage classifies this product as a Hyper Flow Air Filter using a cotton gauze–based filtering medium. From the product information shown: The filter media is described as cotton gauze. The cotton gauze is supported by a molded filter structure designed to maintain its shape inside the factory airbox. The cotton material is described as washable and reusable. NGage does not publish pore size, filtration micron rating, airflow percentage improvement, or comparative efficiency values versus the OEM paper filter. No quantitative airflow or power increase figures are stated by the manufacturer. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is described as a washable and reusable air filter element. Unlike disposable paper air filters that are replaced at each service interval, this filter is intended to be cleaned and reused periodically according to maintenance needs. The product page shows an optional accessory: Air Filter Recharge Oil (optional add-on) This indicates that the filter is designed to be serviced using a cleaning and re-oiling process, similar to conventional cotton-gauze performance air filters. NGage does not publish a fixed cleaning interval.Service frequency will depend on: Riding environment Dust levels Road conditions Mileage covered Intended Function Air filters regulate the flow of intake air into the engine while trapping dust and debris. As stated on the product page: The filter is designed to allow improved airflow compared to stock paper filters. The cotton gauze material is described as enabling airflow while capturing dirt and debris. The filter is intended to protect the engine from contaminants while maintaining intake airflow. NGage does not publish any claims regarding: Horsepower increase Torque gain Fuel economy improvement Emissions reduction This air filter is not positioned as a tuning or racing-only component. Fitment and Installation The NGage Hyper Flow Air Filter is designed as a direct-fit replacement for the stock air filter used in Royal Enfield UCE 350 and 500 motorcycles listed in the compatibility section. No cutting, trimming, or airbox modification is shown or stated. The product page indicates: Hassle-free installation Direct stock replacement No installation tools or fitting complexity are specified by NGage. Durability and Testing From the icons and text shown on the product page, NGage states: Best durability Eco-friendly product 100% organic cotton as filtering media Extensively tested on all terrains Lifetime replacement warranty (10,000 km) No further test methodology, cycle counts, or laboratory data are published. Compatibility As per the NGage product page and compatibility panel: Royal Enfield UCE 350 Models Classic 350 Thunderbird 350 Bullet 350 Electra 350 Royal Enfield UCE 500 Models Classic 500 Thunderbird 500 Bullet 500 Variant Explanation This listing is for NGage Hyper Flow Air Filter for Royal Enfield UCE 350 & 500 only. No alternate sizes, shapes, or engine-specific variants are shown or specified on the manufacturer’s product page. Specifications (Only Verified Data) Brand: NGage Product Type: Hyper Flow Air Filter Filter Media: Cotton gauze Reusable: Yes Washable: Yes Recharge Oil Required: Yes (optional add-on) Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Royal Enfield UCE 350 & 500 models Warranty: Lifetime replacement warranty (10,000 km) Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Royal Enfield UCE 350 and UCE 500 motorcycles listed above. Designed to fit inside the stock airbox. Clean and re-oil the filter using suitable air filter cleaning solution and recharge oil. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage DH7RTII-8 Double Iridium Spark Plug for Royal Enfield J-Series 350 (BS4 & BS6)   Engineered for the Royal Enfield J-Series 350 Platform The NGage DH7RTII-8 Double Iridium Spark Plug is specified for Royal Enfield motorcycles built on the J-Series 350 engine platform. This platform introduced a revised engine architecture featuring updated combustion chamber geometry, fuel injection systems, and refined ignition requirements compared to earlier Royal Enfield engine generations. The DH7RTII-8 is listed by NGage as a direct replacement spark plug for J-Series 350 motorcycles, covering both BS4 and BS6 compliant models within this platform. It is engineered to align with the ignition characteristics and operational requirements defined for these engines. This spark plug is not intended for older UCE engines or non–J-Series Royal Enfield platforms. Understanding the J-Series 350 Platform Royal Enfield’s J-Series 350 engine underpins multiple current-generation motorcycles sharing a common engine and ignition system architecture. The platform includes: Revised cylinder head designUpdated combustion chamber characteristicsFuel-injected system configurationBS4 and BS6 production variants Because these motorcycles share common ignition specifications, NGage lists the DH7RTII-8 as a unified replacement option for the J-Series family. Correct platform identification is essential. Spark plug mismatch can affect ignition stability, combustion efficiency, and long-term engine reliability. This listing applies strictly to the J-Series 350 motorcycles specified in the compatibility section below. Double Iridium Construction The DH7RTII-8 belongs to NGage’s Double Iridium spark plug lineup. “Double Iridium” refers to the use of iridium material on both the center electrode and the ground electrode. Iridium is widely used in modern spark plug design due to its: High melting pointResistance to electrode wearAbility to maintain structural integrity under repeated ignition cycles By applying iridium on both electrodes, the design aims to support consistent spark generation across regular operating conditions. Double iridium construction is commonly used in engines requiring stable ignition performance over extended service intervals. NGage does not publish specific electrode dimensions, preset gap values, or manufacturer-defined service intervals for this part number, and no additional performance claims are implied. This spark plug is positioned strictly as a premium replacement component within its specified application. BS4 and BS6 Compatibility According to NGage product material, the DH7RTII-8 spark plug is compatible with both BS4 and BS6 compliant Royal Enfield J-Series motorcycles. This ensures coverage across production years spanning the emission transition period, provided the motorcycle belongs to the J-Series 350 platform. No claims are made regarding emission reduction benefits, fuel economy improvement, horsepower gains, or performance tuning enhancements. The DH7RTII-8 is intended strictly as a replacement spark plug that aligns with manufacturer-specified ignition requirements. Manufacturing Origin The NGage DH7RTII-8 spark plug is manufactured in Japan, as stated by NGage. No additional manufacturing process details, certifications, or performance endorsements are published by the manufacturer beyond this information. Country of origin is specified strictly for product identification purposes. Intended Use The DH7RTII-8 spark plug is intended for routine replacement during scheduled maintenance intervals as recommended by Royal Enfield. It is suitable for: Daily commutingHighway ridingGeneral road useScheduled spark plug service This spark plug is not marketed as a racing component, track-only ignition system, or specialized tuning upgrade. Correct installation and torque specification should always follow the Royal Enfield service manual guidelines. Fitment Accuracy & Platform Restriction Spark plug selection must match engine platform requirements precisely. The DH7RTII-8 is intended exclusively for Royal Enfield J-Series 350 motorcycles listed below. It should not be installed on: Older UCE 350 enginesRoyal Enfield 500 cc enginesOther Royal Enfield platforms not listed Incorrect spark plug installation may affect ignition performance and engine operation. Compatibility – Royal Enfield J-Series 350 Compatible with: Royal Enfield Classic 350 (Reborn)Royal Enfield Bullet 350 (Reborn)Royal Enfield Meteor 350Royal Enfield Hunter 350 Compatibility applies strictly to J-Series 350 models. Variant Clarification This listing includes: NGage DH7RTII-8 Double Iridium Spark Plug only “Double Iridium” refers specifically to iridium usage on both the center and ground electrodes. No alternate heat ranges, configurations, or material variants are included in this listing. Product Specifications Brand: NGagePart Number: DH7RTII-8Spark Plug Type: Double IridiumVehicle Compatibility: BS4 & BS6 J-Series 350Country of Manufacture: JapanApplication: Motorcycle spark plug Installation & Usage Notes Install only on Royal Enfield J-Series 350 motorcycles listed aboveFollow Royal Enfield service manual torque specificationsInstall on a cold engineFollow standard spark plug installation procedures Professional installation is recommended if unsure about torque settings or spark plug replacement procedures. Summary The NGage DH7RTII-8 Double Iridium Spark Plug is a platform-specific replacement component engineered for Royal Enfield J-Series 350 motorcycles. Manufactured in Japan and designed with double iridium electrode construction, it aligns with the ignition requirements of BS4 and BS6 compliant J-Series engines. It is intended for routine maintenance replacement, maintaining ignition consistency within manufacturer-specified parameters. Platform-specific fitment. Double iridium construction. J-Series ignition compatibility.

Read more less

Red Rooster Polestar Pro Slip-On Exhaust for Royal Enfield Classic 350 Reborn (J-Series) Engineered specifically for the Royal Enfield Classic 350 Reborn platform, the Red Rooster Performance Polestar Pro Exhaust is expertly designed to enhance your riding experience. This exhaust system delivers a controlled, deep exhaust note that stands out without overpowering. It features improved flow characteristics for better engine breathing and long-term durability, ensuring consistent performance throughout its lifespan. Manufactured using high-grade SS304 stainless steel, the Polestar Pro exhaust reflects a commitment to quality. The material choice offers superior structural rigidity that helps withstand daily wear and tear. It is also highly resistant to heat and corrosion, giving riders peace of mind on long journeys and in varying weather conditions. The internal flow design of this exhaust supports smoother evacuation of exhaust gases. This improvement contributes to a more responsive throttle, ensuring you can rely on consistent mid-range power output. Despite the performance upgrades, the Polestar Pro retains excellent rideability, making it suitable for both city commutes and highway runs without compromise. Designed as a direct replacement unit, the exhaust maintains factory mounting points for hassle-free installation. This design perfectly balances the bike’s weight and overall aesthetics. Whether you use it for daily riding or long-distance travel, the Polestar Pro delivers a refined mechanical sound that complements the Classic 350 Reborn’s character without sounding harsh or uncontrolled. Fitment & Compatibility of the Red Rooster Polestar Pro Exhaust This exhaust is compatible exclusively with the Royal Enfield Classic 350 Reborn, powered by the J-Series engine. It is important to note that it is not compatible with older Classic 350 UCE models or any non-J-Series platforms. This careful targeting ensures the best possible fit and performance for the Roosters who choose this product. Owners of the Classic 350 Reborn can expect seamless integration with their bikes, ensuring a perfect match that enhances both aesthetics and functionality. The exclusive fitment guarantees the durability and reliability expected from a high-quality slip-on exhaust system built by Red Rooster. Red Rooster Polestar Pro Exhaust Specifications Brand: Red Rooster Performance Product Line: Polestar Pro Exhaust Type: Slip-on replacement Material: SS304 stainless steel Construction: Welded stainless steel body Finish Options: Black, Polish (variant-based) Weight: Approx. 3.01 kg Mounting Type: Direct bolt-on Heat Resistance: High Rust Resistance: Yes ECU Remap Required: No The strong construction of the exhaust ensures it withstands high temperatures and environmental exposure. Riders can choose between black or polished finishes, both offering excellent durability. These aesthetic options allow the roosters to customize their bikes while maintaining performance integrity. Weight is kept minimal at approximately 3.01 kg, so it does not negatively affect the bike’s handling. The direct bolt-on installation means there is no need for cutting or welding, making it accessible for all levels of mechanical skill. Notably, the Red Rooster exhaust does not require an ECU remap, simplifying installation and use. Installation Guide for Red Rooster Performance Polestar Pro Exhaust The Polestar Pro exhaust features direct bolt-on installation using factory mounting points. This approach eliminates the need for cutting, welding, or ECU tuning. Most riders will find the upgrade straightforward and convenient, enabling quick and clean fitting with basic tools. For best results, professional installation is recommended. This ensures optimal alignment, correct torque settings, and avoids potential installation errors. Proper mounting also preserves exhaust performance and sound quality while protecting the motorcycle's frame and components. What’s Included with the Red Rooster Polestar Pro Exhaust? 1 × Red Rooster Performance Polestar Pro Exhaust (selected finish variant) Required mounting hardware for direct installation Every unit includes all necessary hardware for a smooth mounting process. This inclusive package helps roosters avoid additional purchases or delays due to missing components. With everything on hand, the installation experience is as efficient as possible. The Red Rooster Polestar Pro Exhaust is designed for riders who demand quality, performance, and style. With its red detailing branding included subtly on the exhaust, this part attracts not just the roosters looking for improvement but anyone who appreciates engineering excellence. Upgrade your Classic 350 Reborn today to experience the perfect blend of sound, durability, and ease.

Read more less

BMC FM01138 High-Performance Air Filter for Royal Enfield 350 J-Series Designed for Royal Enfield’s modern 350cc J-Series platform, the BMC FM01138 high-performance air filter delivers improved airflow, consistent filtration, and long service life compared to conventional paper filters. This advanced Royal Enfield air filter optimizes engine performance through superior design and quality materials. Riders will notice better throttle response and smoother engine operation with this filter installed. The careful engineering ensures your bike breathes easier. Manufactured using BMC’s signature oiled cotton gauze construction, this cylindrical air filter allows the engine to breathe more freely. The filter provides precise filtration, preventing dirt and debris from entering your engine. This balance ensures a clean air supply while maximizing airflow and enhancing performance. Such engineering leads to stable combustion and reliable operation in various riding conditions. Whether navigating busy city traffic, cruising highways, or touring long distances, this filter proves effective and durable. The FM01138 is designed for durability and long-term use. It is washable and reusable, which reduces the need for frequent replacements. This feature lowers maintenance costs while maintaining consistent performance over time. The washable design allows easy cleaning and upkeep to keep your engine in optimal condition. Additionally, the air filter is engineered as a direct replacement for the stock filter on Royal Enfield 350 J-Series motorcycles. Installation requires no modifications, making the swap straightforward and convenient. Fitment & Compatibility of Royal Enfield Air Filter This Royal Enfield air filter is compatible with motorcycles equipped with the 350cc J-Series engine. It fits a range of popular models built around this engine platform. This compatibility allows riders of different J-Series bikes to benefit from improved airflow and filtration. Ensuring exact fitment helps the filter perform as intended and helps extend engine life. Classic 350 Reborn Bullet 350 (J-Series) Meteor 350 Hunter 350 Goan Classic 350 BMC specifies compatible model years for the J-Series platform. It is essential to verify that your motorcycle’s engine platform matches these requirements. Confirming the proper fit will maximize the upgrade benefits and protect the engine's integrity. Specifications of BMC Royal Enfield Air Filter Brand: BMC BMC Part Number: FM01138 Filter Type: Cylindrical performance air filter Filter Material: Oiled cotton gauze Construction: Multi-layer cotton with rubber molded ends Internal Base Diameter: 51 mm External Base Diameter: 90 mm Height: 104 mm Washable & Reusable: Yes Installation Type: Direct replacement Warranty: 2 years limited manufacturer warranty The use of multi-layer cotton combined with rubber molded ends enhances both filtration and durability. The dimensions are carefully designed to fit precisely in place of the stock air filter. The FM01138 offers excellent resistance to wear and tear. It is a reliable component for your bike’s air intake system, ensuring clean and efficient air flow at all times. Durability and Maintenance of the Royal Enfield Air Filter The washable and reusable features of this filter are major advantages. Regular cleaning keeps the filter functioning at peak efficiency while maintaining airflow consistency. BMC’s oiled cotton gauze construction traps smaller particles than standard filters. This improved filtration protects your engine and supports better overall performance. Maintenance involves gently washing and re-oiling the filter to restore its filtering ability. Such care lowers long-term expenses, making this filter a cost-effective upgrade. Routine servicing maintains excellent airflow characteristics. This supports optimal combustion and engine health throughout its service life. What’s Included with Your Royal Enfield Air Filter Purchase 1 × BMC FM01138 High-Performance Air Filter Each purchase includes the air filter unit, ready for direct replacement installation. It arrives prepared for an easy swap with your bike’s original air filter. This minimizes downtime and installation complexity. Choosing the BMC FM01138 means equipping your Royal Enfield 350 J-Series with a high-quality, proven air filter solution trusted by riders.

Read more less

PowerTRONIC V4 Performance ECU for Royal Enfield Motorcycles | Plug & Play Piggyback Module | Dual Maps The PowerTRONIC V4 Performance ECU is an advanced plug-and-play piggyback engine control module designed specifically for Royal Enfield motorcycles. It is engineered for riders who want sharper throttle response, improved torque delivery, smoother acceleration, and refined fueling control — without permanently modifying the stock ECU. Unlike generic tuning devices, the PowerTRONIC V4 ECU works by intelligently adjusting fueling and ignition parameters in real time. It connects directly to your motorcycle’s stock wiring harness, allowing seamless integration without cutting wires or flashing the factory ECU. This means performance gains remain reversible while maintaining factory reliability standards. Advanced Fueling & Ignition Control The PowerTRONIC V4 Performance ECU for Royal Enfield continuously monitors engine inputs and optimizes the air-fuel ratio for improved combustion efficiency. By refining fueling delivery and ignition timing, the module enhances throttle crispness and mid-range pull — two areas where most riders immediately notice improvement. This results in: • Smoother acceleration across RPM range• Reduced throttle lag• Improved ride refinement in traffic and touring conditions• Stronger roll-on performance during overtakes Because Royal Enfield engines respond well to optimized fueling, the V4 ECU delivers noticeable improvements without compromising long-term durability. Dual Pre-Tuned Maps & Adaptive Capability The PowerTRONIC V4 ECU comes with dual pre-configured performance maps developed specifically for Royal Enfield platforms. Riders can switch between maps depending on riding conditions or modifications such as aftermarket exhaust systems. The module also supports advanced tuning access through compatible software. This allows experienced users to fine-tune fueling parameters for specific setups, altitudes, or riding styles. For most users, however, the pre-loaded maps deliver significant improvement right out of the box. True Plug & Play Installation Installation is completely plug-and-play. The PowerTRONIC V4 Performance ECU connects to the stock harness using model-specific connectors. No ECU flashing, no soldering, and no dyno session is mandatory for baseline operation. Once installed: • The module automatically begins adaptive fueling• Factory ECU remains untouched• No permanent changes are made to the motorcycle This makes the V4 a practical upgrade for riders who want performance without invasive modification. Built for Real-World Riding Constructed using automotive-grade electronics, the PowerTRONIC V4 ECU is heat-resistant, vibration-resistant, and weather-protected for Indian riding conditions. Whether you ride through city congestion, long-distance highways, or varying altitude zones, the system adapts to maintain consistent performance. The result is improved throttle smoothness during daily commuting, stronger mid-range during highway cruising, and enhanced rideability during touring. Performance Without Compromise The goal of the PowerTRONIC V4 Performance ECU for Royal Enfield motorcycles is not extreme racing output. It is controlled, refined, usable performance. Riders typically report: • More responsive throttle feel• Smoother engine character• Cleaner acceleration• Reduced jerkiness at low RPM Because the stock ECU remains active, factory safety parameters continue functioning as intended. Compatibility (Variant Selection Required) The PowerTRONIC V4 ECU is available for the following Royal Enfield models: • Royal Enfield Himalayan 411 EFI (2020–2023)• Royal Enfield Himalayan 450 (2024–2025)• Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Classic 350 (J-Series)• Royal Enfield Meteor 350• Royal Enfield Hunter 350 Select the correct motorcycle variant before purchase to ensure proper fitment. Technical Overview Brand: PowerTRONICProduct Type: Performance Piggyback ECUInstallation Type: Plug & PlayMaps: Dual Pre-Tuned MapsFueling Control: Real-Time Adaptive AdjustmentApplication: Royal Enfield MotorcyclesWarranty: As per official PowerTRONIC manufacturer policy What’s Included • PowerTRONIC V4 Performance ECU Module• Model-Specific Wiring Harness• Mounting Accessories (as provided by manufacturer) No additional hardware is assumed unless shown in product images.

Read more less

Red Rooster Rumbler Performance Exhaust for Royal Enfield UCE 350 & 500 Models The Red Rooster Rumbler Performance Exhaust is a purpose-engineered slip-on upgrade developed specifically for Royal Enfield’s UCE 350cc and 500cc motorcycles. Designed to enhance exhaust depth, improve throttle feel, and maintain everyday rideability, the Rumbler strikes a deliberate balance between performance refinement and long-term durability. Royal Enfield’s UCE platforms — including Classic, Bullet, Standard, and Thunderbird models — are known for their distinctive thump and relaxed torque delivery. The Rumbler builds on that foundation without distorting the engine’s natural character. Instead of chasing excessive loudness, this exhaust focuses on producing a fuller, bass-heavy exhaust tone that remains controlled and usable across city traffic, highway cruising, and extended touring conditions. Engineered Sound Without Harshness The Rumbler delivers a noticeably deeper exhaust note at idle and a stronger low-frequency presence during acceleration. Under steady cruising speeds, the sound remains composed without intrusive drone. The tuning is intentional — enhancing the iconic Royal Enfield thump while avoiding sharp, metallic overtones or unstable resonance. Unlike short free-flow systems that sacrifice backpressure for noise, the Rumbler is internally tuned to maintain balanced exhaust flow. This ensures that the engine continues to operate within safe performance parameters while benefiting from smoother throttle response and freer breathing. SS304 Stainless Steel Construction The exhaust body is manufactured from SS304 stainless steel, a material widely used in performance exhaust systems due to its strength, corrosion resistance, and ability to withstand repeated thermal cycles. SS304 resists oxidation in humid climates and holds structural integrity during long highway runs and stop-and-go traffic conditions. For riders who use their Royal Enfield daily — whether commuting, touring, or riding through changing weather — this material choice ensures long-term reliability without premature rusting or structural fatigue. Ceramic Wool Packing for Long-Term Tone Stability A defining feature of the Red Rooster Rumbler is the use of ceramic wool packing instead of traditional glass wool. Ceramic wool offers superior heat resistance and degrades more slowly over time. This directly affects sound consistency. Many aftermarket exhausts gradually lose tone depth as packing material burns out. The Rumbler’s ceramic insulation helps maintain a stable exhaust note even after extended usage, highway riding, and exposure to high operating temperatures. The result is sustained acoustic quality rather than short-term sound performance. Real-World Performance Improvement While the Rumbler is not marketed as a race exhaust, it does offer practical riding benefits. By reducing exhaust restriction compared to the factory muffler — while maintaining controlled backpressure — the system supports: • Smoother throttle roll-ons• Improved mid-range response• Freer engine breathing• Slightly more responsive acceleration feel Performance gains are modest but noticeable, especially in mid-range riding conditions typical of UCE engines. Importantly, these improvements are achieved without requiring ECU remapping, fuel adjustment, or internal engine modification. This makes the Rumbler suitable for riders who want measurable improvement without compromising engine reliability. Built for Long-Distance Reliability Royal Enfield motorcycles are often used for touring. The Rumbler is built to handle: • Long highway runs• Continuous heat cycling• High ambient temperatures• Urban traffic stress• Vibration typical of single-cylinder UCE platforms Structural welds are engineered for durability, and the stainless steel body resists corrosion in wet or coastal environments. The exhaust remains consistent across extended use rather than degrading in tone or performance. Direct Bolt-On Installation The Red Rooster Rumbler is a true slip-on replacement. It mounts directly to factory exhaust points using stock alignment geometry. Installation does not require cutting, welding, drilling, or irreversible modification. Key installation features: • Direct bolt-on fitment• No ECU remap required• No electrical changes• Maintains serviceability• Preserves factory alignment Professional installation is recommended for optimal fitment, but experienced owners can complete installation using standard tools. Fitment & Compatibility (As stated by manufacturer) Compatible with Royal Enfield UCE models including: Classic 350Classic 500Bullet 350Bullet 500Standard 350Standard 500Thunderbird 350Thunderbird 500Thunderbird X 350 Compatibility is based on manufacturer claims. Buyers should confirm model year and variant alignment before purchase. Summary The Red Rooster Rumbler Performance Exhaust is not built to overwhelm — it is built to refine. It enhances the Royal Enfield UCE platform by delivering a deeper exhaust tone, improved throttle feel, and long-term durability through stainless steel construction and ceramic wool packing. For riders who want a performance-oriented slip-on exhaust that preserves engine integrity while improving sound and response, the Rumbler represents a balanced, engineered upgrade rather than a cosmetic accessory.

Read more less