Performance Bike Exhausts & Silencers

The Triumph Speed 400 is engineered to be sharp, responsive, and mechanically honest. The Red Rooster Blaze Exhaust doesn’t try to change that character - it refines it, tightens it, and gives it a stronger mechanical voice. Purpose-built for the Speed 400 platform, the Blaze is tuned to enhance throttle clarity, improve mid-range urgency, and deliver a deeper exhaust note that feels deliberate rather than dramatic. This is not an oversized can chasing noise. It is a precision-built system designed around how the 400cc single-cylinder engine breathes and delivers power. Constructed from high-grade Grade 304 stainless steel, the Blaze balances structural strength with corrosion resistance. Every section, from the inlet pipe to the outer canister, is formed to maintain optimal exhaust flow while preserving safe back-pressure levels. The result is smoother scavenging, cleaner combustion response, and a more consistent torque curve through everyday riding RPMs. On the road, what changes is not just the sound, it’s the feel. Throttle transitions become sharper. Roll-ons feel cleaner. The engine responds with less hesitation in the mid-range. There’s a noticeable tightening of the bike’s behavior when accelerating out of corners or navigating stop-start traffic. The Speed 400 already handles with agility; reducing exhaust weight at the rear subtly improves that dynamic even further. The Blaze trims unnecessary bulk compared to the stock system, contributing to improved balance and directional response. While not extreme, the difference is felt in the way the motorcycle flicks into turns and stabilizes under throttle. Sound tuning is where Red Rooster’s engineering becomes evident. The Blaze produces a deeper, more authoritative tone without becoming harsh or intrusive. At idle, it settles into a controlled bass note. Under acceleration, it opens up progressively, delivering presence without raspiness. During highway cruising, the tone remains composed and non-fatiguing, making it suitable for long-distance rides. Internally, high-temperature resistant insulation materials are used to maintain consistent thermal control. Heat cycles from daily commuting, traffic congestion, and extended highway runs do not distort tone quality. The stainless steel construction resists rust, surface corrosion, and weather exposure, ensuring long-term durability even in humid or wet conditions. Installation is engineered to be straightforward. The Blaze is a true direct bolt-on exhaust for the Triumph Speed 400. It mounts to factory points without cutting, welding, or structural modifications. The supplied mounting hardware integrates with the stock configuration, preserving alignment and factory geometry. There are no alignment battles or forced adjustments. Importantly, under standard fitment conditions, the Blaze does not require ECU remapping. It is tuned to work harmoniously with the stock engine calibration while improving overall exhaust flow characteristics. Visually, the Blaze is available in three finishes: Polish: clean metallic finish that highlights stainless craftsmanship Black: darker, aggressive aesthetic that complements modern styling Matte: understated industrial look for a stealth presence All finishes share identical internal construction and performance characteristics. Only the exterior treatment changes. Performance remains consistent across variants. The Blaze is engineered for real-world riders, not for exaggerated dyno claims. Its gains are practical: Improved throttle response in mid-range RPM Smoother roll-on acceleration Controlled, deeper exhaust note Reduced rear-end weight compared to stock Durable stainless steel build quality Long-term resistance to corrosion and heat fatigue On city roads, the exhaust maintains refinement. On open highways, it expresses depth. On spirited weekend rides, it responds quickly and predictably. This is not an attention-seeking exhaust. It is a mechanical enhancement designed to complement the Speed 400’s balanced personality. It gives the motorcycle a stronger acoustic identity and a sharper mechanical response without compromising reliability or everyday usability. The Triumph Speed 400 is built with intent. The Red Rooster Blaze reinforces that intent. Engineering over theatrics.Tone without excess.Performance without compromise.

Read more less

Minimal form. Maximum soul. The Silver Stallion BLAZE+ is a slip-on exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 2.5 kg. The perfect note for your Triumph 400. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion BLAZE+ Type Slip-On Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion BLAZE+ fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion BONNE FULL SYSTEM is a full system exhaust for the Triumph Bonneville T120. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 12 kg. A full system upgrade with a track-tuned growl. Lightweight and lethal. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 12 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion BONNE FULL SYSTEM Type Full System Exhaust Fits Bonneville T120 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 12 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Bonneville T120, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion BONNE FULL SYSTEM fit?It is made for the Triumph Bonneville T120. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?12 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bonneville T120. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Iconic British roar. The Silver Stallion BONNE is a slip-on exhaust for the Triumph Bonneville T100 and Bonneville T120. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2.5 BHP and +5 Nm over the stock system while weighing 5 kg. Timeless aesthetics with modern refinement. What changes on the bike +2.5 BHP and +5 Nm over the stock system, measured on the dyno. A lighter can at 5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion BONNE Type Slip-On Exhaust Fits Bonneville T100 and Bonneville T120 Power gain +2.5 BHP over stock Torque gain +5 Nm over stock Weight 5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Bonneville T100, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion BONNE fit?It is made for the Triumph Bonneville T100 and Bonneville T120. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2.5 BHP and +5 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bonneville T100. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Aerodynamic efficiency. The Silver Stallion BLAZE is a slip-on exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 2.2 kg with mid-pipe. A cylindrical design with a low drag coefficient, better thermal durability and a lighter kerb weight that helps both power-to-weight and mileage. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 2.2 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion BLAZE Type Slip-On Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 2.2 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion BLAZE fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.2 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion BLAZE FULL SYSTEM is a full system exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 6 kg. A full system upgrade with a track-tuned growl. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 6 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion BLAZE FULL SYSTEM Type Full System Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 6 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion BLAZE FULL SYSTEM fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

The Storm Exhaust for Triumph Tiger 900 GT (2025) is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Triumph Tiger 900 GT (2025).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Tiger 900 GT (2025). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Triumph Street Triple 765 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple 765.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Fitment guidanceListed by Barrel for the Triumph Street Triple 765. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Triumph Trident 660, Tiger Sport 660 and Daytona 660 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Trident 660, Tiger Sport 660 and Daytona 660.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Trident 660, Tiger Sport 660 and Daytona 660. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for Triumph Tiger 850 Sport is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Triumph Tiger 850 Sport.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Tiger 850 Sport. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Exhaust for Triumph Street Triple 765 (2014-2022) with Link Pipe is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple 765 (2014-2022).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Street Triple 765 (2014-2022). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The B Twinn Exhaust for Triumph Street Twin 900 is Barrel's twin-outlet line, built for modern classics where the exhaust is part of the silhouette. This version is made for the Triumph Street Twin 900.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Fitment guidanceListed by Barrel for the Triumph Street Twin 900. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Exhaust for Triumph Street Triple and Daytona 675 (2014-2017) is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple and Daytona 675 (2014-2017).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Fitment guidanceListed by Barrel for the Triumph Street Triple and Daytona 675 (2014-2017). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Decat Pipe for Triumph Street Triple and Daytona 675 is a plumbing part, not a muffler. It replaces the restrictive catalytic section ahead of your silencer. On the Triumph Street Triple and Daytona 675 it is the piece that decides how freely everything downstream can flow.Fitted on its own it opens up the midrange and sharpens throttle response. Paired with a Barrel canister it is what lets that canister actually do its job, rather than being choked by a restriction further up the system.Build Stainless steel 304 throughout, so it will not rust through a monsoon Supplied with mounting clamps Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Street Triple and Daytona 675. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Triumph Speed 400 and Scrambler 400X The Barrel Rogue 2.0 is a slip-on built specifically for the Triumph Speed 400 and Scrambler 400X. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel, Black and Steel Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Triumph Speed 400 and Scrambler 400X. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Red Rooster Blaze Exhaust for Triumph Scrambler 400X is not built to shout. It’s built to refine, strengthen, and sharpen what the Scrambler already does well. Designed specifically for the Triumph Scrambler 400X platform, the Blaze is a precision-engineered performance exhaust that enhances throttle response, mid-range torque, and overall ride feel while maintaining structural reliability and long-term durability. This is not a universal slip-on adapted to fit. It is tuned for the 400X’s single-cylinder character and power delivery. Constructed using high-grade stainless steel (Grade 304), the Blaze exhaust system is built to handle sustained heat cycles, vibration, long highway runs, and off-road abuse. CNC-machined components ensure precise tolerances and proper alignment with factory mounting points. The reduced overall weight compared to the stock unit improves agility, especially during quick direction changes, gravel riding, and uneven terrain transitions. Sound is where the Blaze makes its presence known, not through excessive volume, but through depth and control. The exhaust note is deeper, fuller, and more authoritative without becoming harsh or metallic. It enhances the Scrambler 400X’s natural thump while keeping rideability intact for daily commuting, touring, and extended saddle time. Internally, the Blaze uses performance-focused packing and optimized flow pathways to maintain stable back pressure. This balance is critical. Too little restriction reduces rideability. Too much restriction kills response. The Blaze strikes that equilibrium, smoother roll-ons, cleaner acceleration, and improved throttle modulation across the rev range. Whether you're climbing broken terrain, navigating city traffic, or cruising highways at steady RPM, the Red Rooster Blaze Exhaust maintains tone consistency and performance stability. Thermal management remains controlled even in high ambient temperatures, making it suitable for Indian riding conditions. Finish Options, Polish, Black, and Matte The Red Rooster Blaze Exhaust for Triumph Scrambler 400X is available in three finish variants: • Polish FinishA classic stainless steel shine that highlights the mechanical form of the exhaust. Ideal for riders who want a factory-custom aesthetic. • Black FinishA heat-resistant coated finish that delivers a stealthier look while maintaining corrosion resistance. • Matte FinishA balanced visual profile with subdued industrial character. All three variants share identical internal construction and performance tuning. The difference is purely aesthetic. Real-World Riding Benefits On the road, the improvements feel practical, not exaggerated. • Sharper throttle pickup• More responsive mid-range power delivery• Improved engine breathing• Reduced overall weight vs stock exhaust• Controlled, bass-heavy exhaust note The Scrambler 400X retains its touring comfort while gaining a more expressive mechanical personality. Installation & Compatibility The Red Rooster Blaze Exhaust for Triumph Scrambler 400X is designed as a direct bolt-on system. No cutting.No welding.No permanent modifications.No ECU remap required. The kit includes all necessary mounting hardware for a clean installation using stock mounting points. The fitment preserves chassis geometry and clearance for suspension travel and cornering lean. Built for Terrain, Not Just Show This exhaust is engineered for riders who actually use the Scrambler 400X as intended, mixed terrain, long-distance riding, and real-world abuse. The stainless steel body resists corrosion from water crossings, humidity, and daily riding exposure. Structural weld integrity is maintained to withstand vibration stress and continuous riding conditions. The Blaze is not built as a cosmetic add-on. It is a performance upgrade aligned with Triumph Scrambler 400X dynamics. Why Choose the Red Rooster Blaze Exhaust for Triumph Scrambler 400X? Because it improves what matters: • Ride response• Mechanical sound character• Weight balance• Durability under heat and terrain stress• Factory-fit precision It does not overpower the motorcycle’s identity. It strengthens it. The Red Rooster Blaze Exhaust for Triumph Scrambler 400X delivers deeper tone, refined throttle feel, and engineered durability in a properly tuned stainless steel package. This is performance you feel, not noise you tolerate.

Read more less