Exhausts & Performance

Built for the Bear 650 Twin Engine The Barrel B-20 Bass Master Exhaust is engineered specifically for the Royal Enfield Bear 650 platform. This is not just a slip-on, it’s a performance-focused system with a decat pipe designed to unlock the full breathing potential of the 650 twin engine. Now Supplied With the Sub-Header Pipe Barrel has made the sub-header pipe standard on this system, and it is included in the kit at no separate cost. Earlier versions of the B-20 were supplied without it. This is the complete, current specification. 🔊 Signature Bass Master Sound Deep, bass-heavy exhaust tone Strong low-frequency thump No sharp or raspy noise This is tuned for authority, not noise pollution. ⚙️ Decat Performance Advantage Unlike standard slip-ons, this setup includes a decat pipe: Frees up exhaust flow Reduces back pressure Improves engine breathing Enhances throttle response Result → smoother, more responsive acceleration ⚡ Performance Gains You Can Feel Noticeably sharper throttle response Improved torque delivery More engaging riding experience No unnecessary tuning complexity, just real-world gains. 🪶 Weight Reduction & Build Quality Saves approx 1.5-5.5 kg vs stock Constructed from 304 Stainless Steel High durability + corrosion resistance 🛠️ Plug & Play Fitment Direct bolt-on installation (OEM mounts) No cutting or welding required Installation time: ~30-45 minutes 🔧 DB Killer Control Comes with removable DB killer Tune sound based on preference: With DB killer → controlled Without → full bass roar 📦 What’s in the Box B-20 Bass Master Exhaust Decat Pipe Sub-Header Pipe (now supplied as standard) DB Killer Mounting Hardware ✅ Compatibility Royal Enfield Bear 650 ⚠️ Important Notes This is a performance exhaust with decat pipe May not comply with emission or noise regulations in all regions ECU remap is not mandatorybut can help extract optimal performance Sound output will be significantly louder than stock 🛡️ Warranty Manufacturer Warranty: Lifetime rust warranty 1-year weld warranty RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, please refer to our warranty policy. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Powerage Slip-On Exhaust for Royal Enfield Himalayan 450 (Sherpa 450 Platform) Transform the Himalayan 450’s character with the Powerage Slip-On Exhaustengineered specifically for riders who demand sharper throttle response, stronger mid-range pull, and a deeper, more authoritative exhaust note. Built around the Sherpa 450 platformthis system enhances exhaust flow while maintaining engine reliability, delivering a cleaner, more responsive power curve on both road and trail. The Himalayan 450 is a torque-focused machine. It thrives on usable power, not peak numbers. The Powerage Slip-On complements that philosophy by reducing back pressure and optimizing flow dynamics, allowing the engine to breathe more efficiently. The result is noticeably improved roll-on acceleration, stronger response during overtakes, and a more connected throttle feel, especially in mid-range RPMs where adventure riding lives. Whether your bike runs a Single O₂ Sensor (2024 models) or a Dual O₂ Sensor setup (2025 onwards)this exhaust is engineered with precise variant-specific compatibility. Proper sensor integration ensures smooth fueling behavior and stable rideability across altitude changes and varied terrain conditions. Engineered Benefits • Noticeably quicker throttle response• Improved mid-range torque delivery• Stronger roll-on acceleration• Deeper, bass-rich exhaust tone• More controlled engine heat dispersion• Enhanced riding feel during climbs and highway cruising This is not just about sound. It is about refining the way the Sherpa 450 feels under load. Complete Fitment System The Powerage Slip-On comes as a complete installation kit. Included in the package: • Exhaust canister• Bend pipe (model specific)• Clamps and mounting hardware• Removable DB killer• Required chims• Branded Powerage sticker Everything is designed for direct bolt-on installation using factory mounting points. No cutting. No welding. No ECU remap required. Installation is straightforward and can typically be completed with basic hand tools. The system aligns cleanly with the stock mounting geometry, ensuring proper clearance from swingarm, rear brake assembly, and chassis components. Tuned for Real-World Riding The Himalayan 450 is built for versatility, city traffic, broken tarmac, gravel tracks, mountain climbs. This slip-on is tuned to maintain rideability across all of it. The internal flow path is engineered to maintain adequate back pressure for torque retention while improving exhaust evacuation efficiency. That balance is critical on a single-cylinder engine. Too free-flowing, and you lose tractability. Too restrictive, and you choke response. This system finds the middle ground. Expect a more alive throttle response when exiting corners. Expect cleaner engine feel during sustained highway cruising. Expect stronger pull in 3rd and 4th gear during overtakes. Deep, Controlled Sound Signature Fitted with a removable DB killerthe exhaust allows you to tailor sound output based on riding conditions and regulatory requirements. With DB killer installed:• Deep, bass-heavy tone• Refined note suitable for touring Without DB killer:• More aggressive exhaust presence• Stronger low-frequency thump The sound profile is tuned to be full-bodied, not tinny, not hollow. It complements the Himalayan’s long-stroke character without becoming harsh at higher RPMs. Built for Adventure Conditions Constructed from high-quality heat-resistant materials, the Powerage Slip-On is designed to withstand: • Continuous vibration• Long riding hours• Temperature swings• Dust and off-road conditions The mounting structure maintains stability even during rough terrain riding. The finish is engineered to resist corrosion under typical Indian weather and road conditions. Rider-Focused Advantages • Stronger power delivery in loaded touring scenarios• Improved responsiveness during technical off-road sections• Enhanced throttle modulation for slow-speed control• A rugged, performance-oriented visual upgrade The Himalayan 450 is not a showpiece. It is a working machine. This exhaust respects that identity while sharpening its personality. Fitment Compatibility Royal Enfield Himalayan 450 (Sherpa 450 Platform)• Single O₂ Sensor Variant (2024)• Dual O₂ Sensor Variant (2025 onwards) Please select the correct sensor configuration before checkout to ensure proper fitment. Ride harder. Ride cleaner. Sound deliberate. The Powerage Slip-On Exhaust for Royal Enfield Himalayan 450 is built for riders who want performance refinement without compromising reliability, a balanced upgrade that feels engineered, not improvised.

Read more less

Powerage Slip-On Exhaust, Brushed Steel Finish for Royal Enfield Himalayan 411 Unleash the full potential of your Royal Enfield Himalayan 411 with the Powerage Slip-On Exhaust, Brushed Steel Finishengineered for riders who demand stronger mid-range pull, sharper throttle response, and a deeper, more authoritative exhaust note without compromising reliability. Designed specifically for the Himalayan 411 platform, this slip-on exhaust system enhances exhaust gas evacuation while maintaining the precise back-pressure required for usable torque delivery. The result is a cleaner, more responsive power curve with improved throttle control across city traffic, highway cruising, and demanding off-road terrain. Crafted from high-grade stainless steelfinished in a premium brushed steel outer sleeveand paired with a black powder-coated end capthe Powerage Slip-On combines durability with a rugged, adventure-ready aesthetic. It resists corrosion, withstands repeated heat cycles, and maintains structural integrity under vibration-heavy riding conditions. Engineered for Real-World Torque The Himalayan 411 thrives on accessible torque rather than peak dyno figures. This exhaust is tuned accordingly. The internal baffle structure is calibrated to: • Maintain optimal back pressure• Improve throttle response consistency• Enhance mid-range torque feel• Deliver smoother roll-on acceleration• Support stable combustion under load Instead of chasing aggressive top-end spikes, the Powerage Slip-On improves how the bike feels in practical riding scenarios. Climbing gradients, navigating traffic, overtaking on highways, or riding fully loaded, throttle input becomes more predictable and controlled. Acceleration feels cleaner. Gear transitions feel more deliberate. Low-speed modulation improves in off-road conditions where traction sensitivity matters. Sound Profile, Deep, Controlled, Mechanical This is not a shrill or hollow exhaust note. The Powerage Slip-On produces a deep, bass-oriented exhaust tone that complements the Himalayan’s long-stroke single-cylinder engine. The sound remains full-bodied and mechanical without excessive rasp or metallic sharpness. Included is a removable dB reducerallowing you to tailor output depending on: • Urban commuting• Long-distance touring• Trail riding• Local sound compliance requirements With the dB killer installed, the tone remains controlled and road-friendly.Without it, the exhaust develops a fuller, more assertive presence while retaining tonal depth. Construction & Material Integrity Each unit is handcrafted and dyno-tested to ensure consistent performance output and manufacturing quality. Material & Build Highlights: • Full stainless steel construction for rust resistance• Brushed steel finish for long-term durability• Black powder-coated end cap for added heat resistance• Reinforced weld joints for structural stability• Vibration-resistant mounting configuration• Heat-stable internal baffle assembly The brushed exterior ages gracefully and maintains a premium appearance even after exposure to mud, dust, rain, and long-distance touring. This is built for Indian riding conditions, high ambient temperatures, varied terrain, and extended operating hours. Direct Bolt-On Fitment Installation is straightforward and non-invasive. • No cutting• No welding• No ECU remap required• Uses factory mounting points The system is engineered as a direct replacement slip-on exhaust for the Royal Enfield Himalayan 411. Fitment alignment ensures correct clearance with frame components, swingarm movement, and rear suspension travel.As confirmed by Powerage technical support, this exhaust is also compatible with the Royal Enfield Scram 411 platform. All required mounting hardware (nuts, bolts, clamps) is included as supplied by the manufacturer. The entire process remains reversible if needed. Ride Experience Transformation Post-installation improvements are felt more than measured. • Stronger low-to-mid RPM response• More engaging throttle feel• Cleaner power delivery under load• Deeper mechanical exhaust character• Reduced stock exhaust weight• Sharper visual presence The Himalayan shifts from subdued to confident. Not louder for the sake of noise, but tuned for presence and response. This is an upgrade focused on riding feel, not just decibels. Technical Specifications Material: Stainless SteelFinish: Brushed Steel with Black Powder-Coated End CapFitment: Royal Enfield Himalayan 411Installation Type: Direct Bolt-OnSound Control: Removable dB Reducer IncludedDesign: Back-pressure optimized internal baffle systemApplication: Road and off-road use What’s Included • Powerage Slip-On Exhaust (Brushed Steel Finish)• Stainless steel mounting hardware• Removable dB reducer Warranty & Authenticity This product is covered under the official manufacturer warranty as per Powerage policy. RawTorque supplies genuine products sourced through authorized distribution channels. RawTorque does not provide independent warranty coverage beyond the manufacturer’s terms. For complete details, refer to the Warranty Policy.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion CRUISER FULL SYSTEM is a full system exhaust for the Royal Enfield Classic 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 13 kg. Slip-ons plus competition headers, a signature growl and track-inspired tuning. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 13 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion CRUISER FULL SYSTEM Type Full System Exhaust Fits Classic 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 13 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Classic 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion CRUISER FULL SYSTEM fit?It is made for the Royal Enfield Classic 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?13 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Red Rooster Performance Rumbler Max Black Exhaust for Royal Enfield Hunter 350 The Red Rooster Performance Rumbler Max Black Exhaust for Royal Enfield Hunter 350 is a high-quality slip-on exhaust system. It is designed for riders seeking the perfect balance between sound character, build quality, and daily usability. Made by Red Rooster Performance, this exhaust integrates cleanly with the Hunter 350 while enhancing rideability and long-term durability. Exhaust systems affect not only the sound but also heat management, durability, and the overall riding experience. The Rumbler Max Black acts as a direct-fit replacement for the stock exhaust. This allows riders to upgrade their Royal Enfield Hunter exhaust without permanent modifications. Compatibility with the original mounting points and exhaust routing is maintained, which supports easy servicing and reversibility. Material Construction and Finish of the Royal Enfield Hunter Exhaust The Rumbler Max Black is crafted using Grade 304 stainless steel. This material is widely used in performance exhausts for its corrosion resistance and ability to withstand heat cycling. Stainless steel ensures the exhaust handles repeated thermal expansion and contraction during everyday rides and highway use without fatigue. The matte black finish complements the Hunter 350’s design with a clean, performance-focus look. When cared for properly, this finish retains its quality and appearance over long-term use under normal riding conditions. The subtle look fits well with the motorcycle’s aesthetic. Sound Character and Riding Experience Red Rooster Performance’s exhaust systems emphasize controlled sound output rather than simply increasing volume. The Rumbler Max Black delivers a deeper and more distinct exhaust note than the stock unit. Despite the heightened sound, it remains practical and unobtrusive for regular riding. This Royal Enfield Hunter exhaust includes ceramic wool packing inside. This material can handle high temperatures and vibrations for extended periods. Ceramic wool helps maintain the consistent exhaust tone as the system matures, minimizing sound degradation over normal use. Note that sound perception will vary based on riding environment, throttle usage, traffic, and external factors. Riders should always comply with local noise laws and regulations when installing aftermarket exhausts. Designed for Direct Bolt-On Installation The Red Rooster Performance Rumbler Max Black Exhaust is built for direct bolt-on installation on the Royal Enfield Hunter 350. No cutting, welding, or permanent modifications are required. This design makes it easy for riders to fit the new exhaust quickly and safely. Because it uses the motorcycle’s existing mounting points, the exhaust can be installed or removed without altering the bike’s original structure. This makes the upgrade suitable for riders who want reversible changes or may want to switch back to the stock exhaust later. Heat Resistance and Long-Term Durability Motorcycle exhausts regularly face intense heat, vibration, and environmental elements such as road debris and moisture. The stainless steel construction paired with ceramic wool packing keeps the Rumbler Max Black strong and acoustically consistent over time. The design supports daily commuting and weekend rides without performance drops caused by heat fatigue or material wear. Proper installation and maintenance ensure its durability for long-term use as an effective Royal Enfield Hunter exhaust upgrade. Compatibility and Intended Use This exhaust is designed specifically for the Royal Enfield Hunter 350. Its fitment relies on the stock exhaust layout and mounting geometry unique to this model. Use on other motorcycles is not recommended unless confirmed by the manufacturer. Functioning as a purely mechanical component, the Rumbler Max Black does not include any electronic parts. It does not require ECU remapping for regular installation conditions. Actual sound and riding feel may change depending on usage style, fuel quality, and bike condition. Installation and Ownership Considerations Installation should follow proper procedures to guarantee correct alignment, sealing, and mounting security. Exhaust fasteners should be periodically checked, especially soon after installation and during regular servicing. As with all aftermarket Royal Enfield Hunter exhaust upgrades, riders must ensure the bike complies with applicable local traffic, emission, and noise regulations when using this exhaust system. What’s Included The kit contains one Red Rooster Performance Rumbler Max Black Exhaust unit. It is tailored for direct installation on the Royal Enfield Hunter 350. Mounting components in the kit securely integrate with the factory exhaust setup, ensuring a smooth fit and performance upgrade.

Read more less

Robust exhaust design. The Silver Stallion STURDY+ is a slip-on exhaust for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. A signature slash-cut style for a muscular, aggressive tone. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion STURDY+ Type Slip-On Exhaust Fits Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE) Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (UCE), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion STURDY+ fit?It is made for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (UCE). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Classic meets custom. A thump amplifier. The Silver Stallion SPORTY+ is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. Crisp throttle and strong low-end power. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY+ Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY+ fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Lighter. Louder. Meaner. The Silver Stallion CROSS COUNTRY+ is a slip-on exhaust for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4 Nm over the stock system while weighing 3 kg. The Himalayan 450 just found its voice. What changes on the bike +2 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CROSS COUNTRY+ Type Slip-On Exhaust Fits Himalayan 450 and Guerrilla 450 Power gain +2 BHP over stock Torque gain +4 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CROSS COUNTRY+ fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 450. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion TWINS FULL SYSTEM is a full system exhaust for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 12 kg. Slip-ons plus competition headers, a signature growl and track-inspired tuning. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 12 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion TWINS FULL SYSTEM Type Full System Exhaust Fits Interceptor 650 and Continental GT 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 12 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion TWINS FULL SYSTEM fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?12 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Interceptor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Super Meteor 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Super Meteor 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Super Meteor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Super Meteor 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Shotgun 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Shotgun 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Classic 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Classic 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Classic 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Classic 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dual purpose style. The Silver Stallion CROSS COUNTRY is a slip-on exhaust for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4 Nm over the stock system while weighing 3.1 kg with mid-pipe. On-road manners with off-road capability and high ground clearance. What changes on the bike +2 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 3.1 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CROSS COUNTRY Type Slip-On Exhaust Fits Himalayan 450 and Guerrilla 450 Power gain +2 BHP over stock Torque gain +4 Nm over stock Weight 3.1 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CROSS COUNTRY fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3.1 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 450. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Himalayan 450 and Guerrilla 450 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Slim profile for clearance. The Silver Stallion GLIDE is a slip-on exhaust for the Royal Enfield Himalayan 411, Scram 411 and Scram 440. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4 Nm over the stock system while weighing 2.1 kg with mid-pipe. Designed for trails and tarmac alike. What changes on the bike +2 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 2.1 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion GLIDE Type Slip-On Exhaust Fits Himalayan 411, Scram 411 and Scram 440 Power gain +2 BHP over stock Torque gain +4 Nm over stock Weight 2.1 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Himalayan 411, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion GLIDE fit?It is made for the Royal Enfield Himalayan 411, Scram 411 and Scram 440. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.1 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 411. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Interceptor 650 and Continental GT 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Plug and play fitment. The Silver Stallion GOAN is a slip-on exhaust for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.7 BHP and +3 Nm over the stock system while weighing 2.5 kg. No mid-pipe required. A cafe racer silhouette with a coastal tune. What changes on the bike +1.7 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion GOAN Type Slip-On Exhaust Fits Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series) Power gain +1.7 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Goan Classic 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion GOAN fit?It is made for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.7 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Goan Classic 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Robust exhaust design. The Silver Stallion STURDY is a slip-on exhaust for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. Uniform smooth gas flow, low droning, no sharp edges and a deeper tone. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion STURDY Type Slip-On Exhaust Fits Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE) Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (UCE), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion STURDY fit?It is made for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (UCE). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Aerodynamic efficiency. The Silver Stallion OUTLANDER is a slip-on exhaust for the Royal Enfield Bear 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2.5 BHP and +4.9 Nm over the stock system while weighing 3.5 kg with mid-pipe. A cylindrical body with low drag and high thermal durability. What changes on the bike +2.5 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 3.5 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion OUTLANDER Type Slip-On Exhaust Fits Bear 650 Power gain +2.5 BHP over stock Torque gain +4.9 Nm over stock Weight 3.5 kg with mid-pipe Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Bear 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion OUTLANDER fit?It is made for the Royal Enfield Bear 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2.5 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3.5 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bear 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Performance balance. The Silver Stallion SPORTY is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 2.5 kg. Excellent power delivery and throttle response, especially at lower RPM. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Sustained Acoustic Performance. The Silver Stallion LONGSHOT is a slip-on exhaust for the Royal Enfield Super Meteor 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 6 kg. No power loss, degradation or deformity, with even heat dissipation. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion LONGSHOT Type Slip-On Exhaust Fits Super Meteor 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Super Meteor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion LONGSHOT fit?It is made for the Royal Enfield Super Meteor 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Super Meteor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Custom look, classic style. The Silver Stallion ROADKING is a slip-on exhaust for the Royal Enfield Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +3.5 Nm over the stock system while weighing 6 kg. More power at higher RPM, a throatier note and better heat dispersion. What changes on the bike +2 BHP and +3.5 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion ROADKING Type Slip-On Exhaust Fits Shotgun 650 Power gain +2 BHP over stock Torque gain +3.5 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Shotgun 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion ROADKING fit?It is made for the Royal Enfield Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +3.5 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Shotgun 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Shorty design. The Silver Stallion SHORTY is a slip-on exhaust for the Royal Enfield Hunter 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.75 BHP and +3 Nm over the stock system while weighing 2.1 kg. The internals of a full sized exhaust: large core, direct air flow, low back pressure. What changes on the bike +1.75 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.1 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SHORTY Type Slip-On Exhaust Fits Hunter 350 Power gain +1.75 BHP over stock Torque gain +3 Nm over stock Weight 2.1 kg Finishes Silver, Black Matte, Brushed, Dual Tone Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Hunter 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SHORTY fit?It is made for the Royal Enfield Hunter 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.75 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed, Dual Tone. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Hunter 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Cruiser Vibe. The Silver Stallion CRUISER is a slip-on exhaust for the Royal Enfield Classic 650, Super Meteor 650 and Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 6 kg. Tuned for cruising, with a deep bassy note. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CRUISER Type Slip-On Exhaust Fits Classic 650, Super Meteor 650 and Shotgun 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CRUISER fit?It is made for the Royal Enfield Classic 650, Super Meteor 650 and Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less