NGage Hyper Flow Air Filter (NGAGE-024RTX300) for TVS Apache RTX 300, BMW G 310 & Apache RR 310 (2026)

NGage Hyper Flow Air Filter for TVS Apache RTX 300, BMW G 310 & Apache RR 310 (2026)

The NGage Hyper Flow Air Filter (part no. NGAGE-024RTX300) is a washable, reusable performance air filter for the TVS Apache RTX 300 adventure tourer and the 2026 BMW G 310 and TVS Apache RR 310 / RTR 310. It drops straight into the stock airbox in place of the disposable paper element, flows up to 30% more air than the stock filter, and is rated by NGage for up to 0.5 BHP more at the rear wheel.

Made in India by NGage Powerparts. MRP ₹3,500, inclusive of all taxes.

Key Benefits

• Up to 30% more airflow than the stock paper filter
• Up to 0.5 BHP more on wheels (NGage-stated figure)
• 100% organic cotton filter media that traps dust while letting the engine breathe
• Washable and reusable: clean, re-oil and refit instead of buying a new paper filter at every service
• 1,00,000 km replacement warranty from NGage
• Hassle-free installation: direct fit, no cutting or modification
• Extensively tested on all terrains: highway, city traffic and off-road trails
• Eco-friendly: one reusable filter replaces a stack of disposable elements

Compatibility

Which NGage Filter Fits My 310?

NGage makes two different Hyper Flow filters for the 310 family. Check your model year before you order:

• TVS Apache RTX 300 and 2026 BMW G 310 / Apache RR 310: this filter, NGAGE-024RTX300.
• Earlier BMW G 310 R, G 310 GS and TVS Apache RR 310: the NGage Hyper Flow Air Filter NGAGE-016BMW310.

Not sure which one you need? Message us your bike model and registration year and we will confirm fitment before dispatch.

How a Hyper Flow Air Filter Helps

A paper filter starts restricting airflow the moment it begins to collect dust. The Hyper Flow element uses layered cotton media that holds dirt in its fibres while leaving more open area for air to pass, so the engine keeps breathing freely between services. On a fuel-injected motor like the RTX 300's, that shows up as crisper throttle response and a small gain in usable power, which NGage puts at up to 0.5 BHP on wheels.

Specifications

Options

• Without: NGage Hyper Flow Air Filter only.
• With: filter plus NGage air filter recharge oil, so you can service it yourself from day one.

Installation

1. Switch off the engine and let the bike cool. Refer to your owner's manual for airbox access.
2. Open the airbox cover and remove the stock paper filter.
3. Wipe out any dust or debris inside the airbox.
4. Seat the NGage Hyper Flow filter in the airbox, making sure the rubber edge seals evenly all round.
5. Refit the airbox cover and any panels you removed.

Cleaning and Maintenance

Inspect the filter at every service and clean it sooner if you ride in dust or off-road. Wash it with filter cleaner, rinse from the clean side, let it dry naturally, then apply a light, even coat of filter oil before refitting. The NGage Air Filter Cleaning & Recharge Kit has everything you need. Never use compressed air or a heat gun to dry the cotton media.

More for Your Apache RTX 300

Doing a full service? Pair the filter with 66BHP Street Pro semi-ceramic brake pads for everyday riding, or the 66BHP Race Pro sintered brake pads for hard, loaded riding. See every part we stock for the bike in our TVS Apache RTX 300 accessories collection, or browse all NGage air filters for other motorcycles.