One rear pad for the Africa Twin, Ninja 650, Versys and RTX 300.
NGage HB 087 (Whisker Ceramic) and HBS 087 (Sintered) are direct replacement rear pads for the Honda Africa Twin, Kawasaki Ninja 650 and Versys, Yamaha R6 and TVS Apache RTX 300. Same shape and fit as the stock pads, so they drop straight into the original rear caliper.
Why riders switch to NGage
Two compounds, one fit. Whisker Ceramic for smooth, quiet everyday braking, or Sintered for a harder bite and more heat tolerance. Same shape, same caliper.
Whisker reinforced ceramic. Fine fibre-like whiskers in the ceramic compound add strength and keep the friction steady as the pads heat up.
Rated for long life. NGage rates the Whisker Ceramic pad for up to 15,000 to 25,000 km in normal riding.
ARAI tested, made in Japan. Brand new, in sealed NGage packaging, with a GST invoice.
Drops straight in. Direct replacement for the stock pads. No modification to the caliper or disc.
Ceramic or Sintered: which should I pick?
Whisker Ceramic (HB 087)
Sintered (HBS 087)
Best for
Daily riding, city and touring
Hard riding, long descents, heavy loads, wet weather
Feel
Smooth, progressive bite
Stronger initial bite
Friction coefficient
0.45 to 0.60
0.55 to 0.65
Heat resistance
Up to 650°C
Up to 1,000°C
Noise and dust
Quieter, cleaner wheels
A little more dust and noise
Not sure? Most riders are happiest with the Whisker Ceramic. Pick the Sintered if you ride hard, carry a pillion and luggage often, or ride a lot in the hills and rain.
Fitment (rear only)
HondaAfrica Twin
Kawasaki
Ninja 650 (2017 to 2020)
Versys 300
Versys 650
Versys 1000
YamahaR6
TVSApache RTX 300
One pack fits one rear caliper. Front and rear pads are different parts and are sold separately.
Check before you order
For the front of the RTX 300 see the NGage HB 184 front pads.
For the front of the Versys 300 see the NGage HB 089 front pads.
Specifications
Brand
NGage
Pad code
HB 087 (Whisker Ceramic), HBS 087 (Sintered)
Position
Rear
Friction coefficient
0.45 to 0.60 (ceramic), 0.55 to 0.65 (sintered)
Heat resistance
Up to 650°C (ceramic), up to 1,000°C (sintered)
Rated life
Up to 15,000 to 25,000 km (Whisker Ceramic, normal riding, as rated by NGage)
Pack contents
1 set (2 pads) for one rear caliper
Testing
ARAI tested
Made in
Japan
Fitting and bedding in
Push the caliper pistons back gently, clean the pad slides, and fit the new pads with the friction side facing the disc.
Check the disc. If it is scored, has a lip at the edge or is below its minimum thickness, replace it with the pads.
Pump the lever or pedal until it is firm before you ride.
Bed them in: 8 to 10 moderate stops from about 50 to 10 km/h, without coming to a full stop, then ride gently for a few minutes to let them cool.
Go easy on hard braking for the first 150 to 200 km while the pads settle in.
Not sure these fit your bike? Message us on WhatsApp with your model, year or RC and we will help you choose.
Read
more
less