This is the genuine Rolon BPR brass chain sprocket kit, kit reference HAXRC 323NF, for the Royal Enfield Interceptor 650 and Continental GT 650. It replaces the whole final drive in one box: a brass-plated sealed 525 chain with 100 links, a 15-tooth front sprocket and a 38-tooth rear sprocket, all at the factory gearing.
Specifications
| MRP |
₹4,139 (Rolon MRP, inclusive of all taxes) |
| Kit reference |
HAXRC 323NF (Rolon BPR brass kit) |
| Fits |
Royal Enfield Interceptor 650, Continental GT 650 (stock 15T/38T gearing) |
| Chain |
R525HAXRC-100-2 |
| Chain size |
525 pitch |
| Chain length |
100 links |
| Chain plating |
Brass plated |
| Chain type |
Sealed ring chain (quadruple sealed, per Rolon box) |
| Front sprocket |
15T (S 02 676) |
| Rear sprocket |
38T (S 02 817), 6 holes |
| Gearing |
Factory ratio, 15/38 |
| Supplied as |
Complete kit: chain, front sprocket and rear sprocket |
| Brand |
Rolon (L.G. Balakrishnan & Bros) |
What's in the box
- Brass-plated sealed chain R525HAXRC-100-2 (525 pitch, 100 links)
- Front sprocket 15T (S 02 676)
- Rear sprocket 38T (S 02 817), 6 mounting holes
Which bikes it fits
Both Royal Enfield 650 twins built on the same platform use this kit: the Interceptor 650 and the Continental GT 650. They share the 648cc parallel-twin engine and the same final drive, which is why one Rolon kit covers both.
To check your bike, look at the stock sprockets: the tooth count is stamped on the face. A 15T front and 38T rear on a 525 chain is the factory setup this kit matches. If your bike has non-standard sprockets, message us on WhatsApp first.
The other 650s use different kits: see the Super Meteor 650 kit (ACRC 465NF) and the Shotgun 650 kit (ACRC 464NF). Riding a Bear 650? Message us before ordering.
Why riders pick the BPR brass kit
-
Rust resistance: the brass plating protects the chain plates through the monsoon, coastal air and frequent washing.
-
Sealed joints: Rolon's box lists enhanced wear resistance from quadruple sealing, which keeps the factory grease in and grit out.
-
Hardened sprockets: both sprockets are made for wear resistance and fatigue strength, sized for the torque of the 650 twin.
-
The gold look: it suits the retro lines of the Interceptor and the cafe-racer GT, and it stays gold.
Brass BPR kit or a standard kit?
Rolon also makes a standard kit for these bikes (HAXR 293NF) with the same gearing and chain length but no brass plating. The BPR kit costs a little more. It is worth it if you ride in the rain, live near the coast or park outdoors. If you ride mostly dry and keep the chain clean, a standard sealed kit will serve you well too. Other kits we stock for the 650 twins: the Diamond Razer O-ring kit and the NGage TORQX kit.
When to replace your chain and sprockets
- The chain needs adjusting far more often, or the adjusters are near the end of their travel
- Slack changes as you turn the rear wheel (tight spots)
- You can lift the chain away from the back of the rear sprocket
- The sprocket teeth look hooked or pointed instead of evenly rounded
- The drive clunks under load or has become noisy
Always replace the chain and both sprockets together. A new chain on worn sprockets wears out quickly, which is why Rolon sells this as a complete kit.
Fitting and care
- If the chain comes with a rivet-type joining link, it must be closed with a proper chain riveting tool. Never swap in a clip link on a sealed chain carrying 650 twin torque.
- Set the chain slack to the figure in your owner's manual, check rear wheel alignment, and recheck slack after the first 500 km.
- Clean with an O-ring safe chain cleaner and lube with an O-ring chain lube roughly every 500 to 700 km, and after every wet ride. Avoid pressure washers, wire brushes and petrol. The Motul chain maintenance kit covers both.
Buying from Rawtorque
- Genuine Rolon, brand new, with a proper GST invoice
- Dispatched from Kerala in 1 to 2 business days, delivered across India
- Partial cash on delivery available on this kit
- Fitment help before you order: WhatsApp +91 94465 14691
Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it. More upgrades for both bikes: Interceptor 650 & GT 650 upgrades.