Motorcycle | Rawtorque

Built for the Bear 650 Twin Engine The Barrel B-20 Bass Master Exhaust is engineered specifically for the Royal Enfield Bear 650 platform. This is not just a slip-on, it’s a performance-focused system with a decat pipe designed to unlock the full breathing potential of the 650 twin engine. Now Supplied With the Sub-Header Pipe Barrel has made the sub-header pipe standard on this system, and it is included in the kit at no separate cost. Earlier versions of the B-20 were supplied without it. This is the complete, current specification. Signature Bass Master Sound Deep, bass-heavy exhaust tone Strong low-frequency thump No sharp or raspy noise This is tuned for authority, not noise pollution. Decat Performance Advantage Unlike standard slip-ons, this setup includes a decat pipe: Frees up exhaust flow Reduces back pressure Improves engine breathing Enhances throttle response Result → smoother, more responsive acceleration Performance Gains You Can Feel Noticeably sharper throttle response Improved torque delivery More engaging riding experience No unnecessary tuning complexity, just real-world gains. Weight Reduction & Build Quality Saves approx 1.5-5.5 kg vs stock Constructed from 304 Stainless Steel High durability + corrosion resistance Plug & Play Fitment Direct bolt-on installation (OEM mounts) No cutting or welding required Installation time: ~30-45 minutes DB Killer Control Comes with removable DB killer Tune sound based on preference: With DB killer → controlled Without → full bass roar What’s in the Box B-20 Bass Master Exhaust Decat Pipe Sub-Header Pipe (now supplied as standard) DB Killer Mounting Hardware Compatibility Royal Enfield Bear 650 Important Notes This is a performance exhaust with decat pipe May not comply with emission or noise regulations in all regions ECU remap is not mandatory, but can help extract optimal performance Sound output will be significantly louder than stock Warranty Manufacturer Warranty: Lifetime rust warranty 1-year weld warranty RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, please refer to our warranty policy. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

BMC FM01155 Air Filter for Honda H’ness CB350, CB350RS & CB350 (Oiled Cotton Performance Filter) The BMC FM01155 Air Filter is a direct replacement performance air filter designed for Honda’s 350cc platform, including the H’ness CB350, CB350RS, and newer CB350 variants. It installs inside the stock airbox, replacing the OEM filter without requiring any modification. Constructed using oiled cotton gauze, this panel-type air filter is engineered to support consistent airflow while maintaining effective filtration. The multi-layer cotton media allows controlled air intake while capturing fine contaminants, helping ensure stable engine operation across daily riding and long-distance touring conditions. BMC’s full moulding process creates a single-piece filter structure without welded joints, improving durability and eliminating structural weak points found in conventional filters. The filter is pre-oiled, washable, and reusable, making it a long-term replacement compared to disposable paper filters when maintained correctly. Construction & Design Panel-type OEM replacement filterOiled cotton gauze filtration mediaEpoxy-coated alloy mesh supportFull moulded single-piece constructionPre-oiled and ready for installation Compatibility Honda Honda CB350 (2025 onwards)Honda H’ness CB350 (2020 onwards)Honda H’ness CB350RS (2021 onwards)Honda H’ness CB350 DLX / DLX Pro (2022 onwards)Honda H’ness CB350 DLX / DS (2023 onwards) Specifications Brand: BMCModel: FM01155Filter Type: Panel Air FilterFilter Material: Oiled Cotton GauzeWashable: YesReusable: YesOEM Replacement: YesOuter Width: 88 mmOuter Length: 224 mm

Read more less

The NGage HB 184 and HBS 184 front brake pads are disc brake pads developed for the front brake caliper used on the Triumph Speed 400 and Triumph Scrambler 400X. These brake pads are manufactured to match the exact pad shape, mounting profile, and contact surface geometry required by the front braking system fitted to these motorcycles, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the front brake position. The rear brake pads for these models use a different pad code and are listed separately. Front brake pads play the primary role in a motorcycle’s braking system. The majority of stopping force is generated at the front wheel, which makes front brake pad selection critical for braking confidence, lever feel, and controlled deceleration. A front brake pad must deliver stable friction behavior, predictable bite, and consistent performance across a wide range of temperatures and braking loads. NGage offers the HB 184 front brake pad shape in two friction material variants: Whisker Ceramic (HB 184) and Sintered (HBS 184). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and how it behaves under heat, load, and repeated braking cycles. Whisker Ceramic Variant, HB 184 The HB 184 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver smooth initial bite, progressive braking force buildup, and stable friction output during everyday riding conditions. The ceramic matrix allows controlled modulation at the brake lever, which is particularly useful in urban riding, highway cruising, and mixed riding environments where precise braking control is preferred. The whisker reinforcement improves structural stability within the friction layer, helping the pad maintain consistent surface behavior under repeated braking cycles. This compound is designed for riders who prioritize refined braking feel, predictable front brake response, and consistent deceleration without aggressive bite characteristics. Sintered Variant, HBS 184 The HBS 184 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, wear-resistant friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, extended downhill descents, and high-speed riding. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake heat buildup is significant. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher front brake temperatures. Fitment & Compatibility This listing applies to the front brake position on the following motorcycles: Compatibility (Front Brake Only)Triumph Speed 400Triumph Scrambler 400X The HB 184 and HBS 184 pad shape is shared across these two models for the front caliper. Rear brake pads use a different pad code and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 184, Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responseProgressive front brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 184, Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 184 (Whisker Ceramic), HBS 184 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Front brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock front brake pads• No modification required for compatible models• Install only in the front brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 150-200 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

The NGage HB 150 and HBS 150 rear brake pads are designed for Honda’s CB 350 platform, covering the CB 350, CB 350C, CB 350 H’ness, and CB 350RS. These pads are shaped to match the rear brake caliper profile used on these motorcycles, ensuring correct fitment and proper contact with the brake disc. This listing is for the rear brake position only. Front brake pads for these models are listed separately under a different pad code. NGage offers this pad shape in two friction material options, Whisker Ceramic and Sintered, allowing riders to select the compound that best suits their braking preference, riding style, and operating conditions. Friction Material Options (Variants) HB 150, Whisker Ceramic Brake PadsThis variant uses NGage’s whisker-reinforced ceramic compound, engineered for smooth braking response and controlled modulation. The ceramic matrix is tuned for stable everyday performance, making it suitable for urban riding, highway use, and touring where predictable rear brake feel is preferred. HBS 150, Sintered Brake PadsThis variant uses a metallic sintered friction compound formed under high temperature and pressure. It is built for higher thermal stability and stronger bite under demanding braking conditions. The sintered formulation is suited for riders who load the rear brake more aggressively or ride in conditions that generate higher brake temperatures. Both variants share the same physical dimensions and mounting geometry. Only the friction compound differs. Compatibility, Rear Brake Only Honda CB 350Honda CB 350CHonda CB 350 H’nessHonda CB 350RS This listing applies strictly to the rear brake caliper of the above models. Technical Overview Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 150 (Whisker Ceramic), HBS 150 (Sintered)Material Options: Ceramic-based or Sintered metallicCertification: ARAI Tested (as indicated by NGage)Manufacturing Origin: Japan (as indicated by NGage) Installation & Use Notes • Designed for direct replacement in the stock rear caliper• No modification required when installed on compatible models• Follow standard brake pad bedding-in procedures after installation• Professional installation recommended for consistent braking performance• Always replace brake pads as a complete axle set where applicable

Read more less

The NGage HB 089 and HBS 089 front brake pads are engineered for Honda’s CB 350 platform, covering the CB 350 H’ness, CB 350RS, and CB 350. These pads are designed to match the front brake caliper dimensions and mounting profile required for these motorcycles, ensuring direct fitment without modification. This listing is for the front brake position only. Rear brake pads are listed separately under a different product code. NGage offers this pad shape in two distinct friction materials, Whisker Ceramic and Sintered, allowing riders to select the compound that best aligns with their riding style, usage pattern, and braking preference. Friction Material Options (Variants) HB 089, Whisker Ceramic Brake PadsThis variant uses NGage’s whisker-reinforced ceramic compound, designed to deliver progressive braking feel, consistent modulation, and stable performance under everyday riding conditions. The ceramic matrix is optimized for controlled heat behavior and smooth engagement, making it well-suited for city riding, touring, and highway use. HBS 089, Sintered Brake PadsThis variant uses a metallic sintered friction compound formed under high temperature and pressure. It is engineered for higher thermal stability and strong bite under demanding braking conditions. The sintered formulation is suitable for aggressive riding, high-load usage, and situations where consistent braking performance is required at elevated temperatures. Both variants share the same physical shape, thickness, and mounting profile. Only the friction compound differs. Compatibility, Front Brake Only Honda CB 350 H’nessHonda CB 350RSHonda CB 350 This listing applies strictly to the front brake caliper of the above models. Technical Overview Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 089 (Whisker Ceramic), HBS 089 (Sintered)Material Options: Ceramic-based or Sintered metallicCertification: ARAI Tested Manufacturing Origin: Japan  Installation & Use Notes • Designed for direct replacement in the stock front caliper• No modification required when installed on compatible models• Follow standard brake pad bedding-in procedures after installation• Professional installation recommended for optimal braking performance• Always replace brake pads as a complete axle set

Read more less

NGage HB 155 / HBS 155 Rear Brake Pads for Royal Enfield Classic 650, Super Meteor 650 & Shotgun 650, Ceramic & Sintered Options (Rear Only) The NGage HB 155 and HBS 155 rear brake pads are disc brake pads designed for Royal Enfield motorcycles that use this exact pad shape and mounting specification at the rear brake caliper. These brake pads are specified for the Royal Enfield Classic 650Royal Enfield Super Meteor 650 and Royal Enfield Shotgun 650 in the rear brake position. These motorcycles share the same rear brake pad format, allowing a single pad code to be used across the range. This listing covers the rear brake pad set only for these motorcycles. Brake Pad Function & Fitment Logic Brake pads are a core wear component in a motorcycle’s braking system. Their role is to generate friction against the brake disc when hydraulic pressure is applied through the brake caliper. For proper braking behavior, brake pads must match the exact backing plate shape, thickness, and mounting profile specified for the brake caliper design used on the motorcycle. NGage brake pad codes define this physical geometry. Only pads with the correct code should be installed in a given caliper. For the motorcycles covered under this listing: HB 155 represents the Whisker Ceramic variant HBS 155 represents the Sintered variant Both variants share identical dimensions and mounting features. The only difference between the two is the friction material composition. Using the correct pad code is essential. Installing pads with a different shape or specification can lead to improper seating, uneven pad wear, brake noise, inconsistent braking response, or long-term damage to braking components. Variant Explanation This product is available in two NGage material variants: HB 155, Whisker Ceramic Brake PadsThis variant uses a ceramic-based friction compound reinforced with whisker fibers. It is classified by NGage as a Whisker Ceramic brake pad. The compound is designed to provide stable braking behavior and consistent friction characteristics under standard road riding conditions. HBS 155, Sintered Brake PadsThis variant uses a metallic sintered friction compound. It is classified by NGage as a Sintered brake pad. Sintered pads are manufactured using fused metallic powders and are typically selected where higher thermal stability and consistent braking behavior under sustained load are required. Both variants are identical in shape, fitment, and mounting dimensions.Only the friction material composition differs between HB and HBS variants. Intended Application The NGage HB 155 and HBS 155 rear brake pads are direct-replacement components for the rear brake calipers used on the Royal Enfield Classic 650, Royal Enfield Super Meteor 650 and Royal Enfield Shotgun 650. These brake pads are not universal and are not interchangeable with other NGage pad codes such as HB 163, HB 164, or HB 184. They are intended strictly for motorcycles that specify pad code HB 155 or HBS 155 at the rear. Installation & Service Considerations Brake pads are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals or when pad thickness reaches the wear limit. Installation should follow standard brake service procedures, including: Cleaning the brake caliper and pad guide surfaces Inspecting the brake disc for wear or scoring Seating the pads correctly within the caliper Tightening mounting hardware to the correct torque Performing a bed-in procedure after installation Improper installation can result in brake noise, uneven wear, or inconsistent braking response. Professional installation is recommended for riders who are not familiar with motorcycle brake system service procedures. Summary The NGage HB 155 and HBS 155 rear brake pads are direct-replacement brake pads designed for Royal Enfield 650cc motorcycles that use this exact rear pad format. Available in Whisker Ceramic and Sintered variants, these pads provide two friction material options while maintaining identical fitment geometry. Correct specification matching and proper installation are essential prior to use. Compatibility (Rear Only) Royal Enfield Classic 650 Royal Enfield Super Meteor 650 Royal Enfield Shotgun 650 Variant Explanation Whisker Ceramic (HB 155): Ceramic-based friction compound Sintered (HBS 155): Metallic sintered friction compound Both variants share identical fitment and mounting dimensions Specifications Brand: NGage Product Type: Motorcycle brake pads Position: Rear Pad Codes: HB 155 (Whisker Ceramic), HBS 155 (Sintered) Compatibility: Royal Enfield Classic 650, Royal Enfield Super Meteor 650, Royal Enfield Shotgun 650 Certification Marking: ARAI Tested Manufacturing Origin: Japan Installation / Usage Notes Install only in the rear brake caliper position Use only the specified pad code for your motorcycle Perform bed-in procedure after installation Professional installation recommended

Read more less

Which Classic 350 do you have? This kit is for the new Classic 350 (2021 onwards), Hunter 350 and Meteor 350. For the old UCE Classic 350 with a rear drum brake (up to 2020), choose the Rolon kit for the old Classic 350 (UCE, drum brake). Rolon Brass Chain & Sprocket Kit for Royal Enfield Meteor 350, Hunter 350 & Classic 350 Reborn (J-Platform) The Rolon Brass Chain & Sprocket Kit is a matched final-drive replacement set developed specifically for Royal Enfield J-platform 350 motorcycles. This includes: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Series) These motorcycles share a common J-platform drivetrain architecture. This kit is engineered to align with that platform’s original equipment geometry, maintaining correct pitch, sprocket tooth profile, chain alignment, and drivetrain load distribution. This is a direct-replacement drivetrain kit. It is not a universal chain kit and must not be installed on non, J-platform Royal Enfield motorcycles. Platform-Specific Fitment, J-Series Only Royal Enfield’s J-platform introduced a revised engine and drivetrain configuration compared to older UCE-era motorcycles. Differences include sprocket alignment, carrier geometry, and drivetrain layout. This Rolon kit is designed strictly for J-platform 350cc motorcycles. Compatible Models: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Platform) Not Compatible With: Classic 350 (UCE platform, drum or disc variants)Bullet 350 UCERoyal Enfield 500 modelsHimalayan 411 / 450Any non, J-platform Royal Enfield motorcycles This kit is designed only for Royal Enfield J-platform 350 motorcycles. It must not be installed on UCE-era Classic or Bullet models. Correct platform identification is critical. Chain pitch and sprocket alignment differ across generations. Chain Construction, Brass-Coated Steel The drive chain supplied in this kit features steel construction with a brass surface coating. The brass coating serves multiple functions: Improved resistance to surface oxidationReduced susceptibility to moisture-related corrosionEnhanced surface durability compared to untreated steel chainsSupport for smoother long-term operation under similar riding conditions The chain maintains OEM-spec pitch and roller dimensions for J-platform drivetrains. Correct pitch alignment is essential for maintaining smooth sprocket engagement and minimizing premature wear. The brass coating does not alter drivetrain geometry. It serves as a protective surface treatment over the steel structure. Front & Rear Sprocket Construction The front and rear sprockets included in this kit are manufactured from hardened steel and cut to match OEM mounting geometry used on J-platform motorcycles. Sprocket accuracy directly influences: Chain engagement consistencyLoad distribution across teethDrivetrain smoothnessWear uniformity Incorrect tooth profile or pitch mismatch can accelerate chain wear and produce uneven drivetrain behaviour. This Rolon kit maintains OEM-spec tooth count and geometry for J-platform alignment. Both sprockets are designed to integrate directly with factory mounting points and carriers used on Meteor 350, Hunter 350, and Classic 350 (Reborn). Why Replace as a Matched Set Chain and sprockets wear together as a system. Installing a new chain on worn sprockets, or vice versa, can accelerate uneven wear and reduce service life. This kit is supplied as a matched drivetrain set to maintain: Uniform wear patternsProper chain tension behaviourBalanced load distributionConsistent final-drive performance Replacing all three components together supports drivetrain longevity and stable power transfer. Kit Contents 1 × Rolon Brass-Coated Drive Chain1 × Front Sprocket1 × Rear Sprocket Supplied as a matched final-drive set. Construction & Material Overview Chain: Steel constructionBrass surface coatingOEM-spec pitch and roller dimensions Sprockets: Hardened steel constructionOEM-spec tooth profileDesigned for J-platform sprocket carriers Verified Specifications Brand: RolonProduct Type: Motorcycle chain & sprocket kitApplication: Final drive replacementChain Type: Brass-coated steel chainPlatform Compatibility: Royal Enfield J-platform 350ccPosition: Front + Rear drivetrainVehicle Compatibility: Meteor 350, Hunter 350, Classic 350 (Reborn) Installation & Usage Notes Install only on Royal Enfield J-platform 350 motorcyclesAlways replace chain and sprockets together as a matched setEnsure correct chain slack adjustment after installationVerify rear wheel alignmentLubricate chain after installation and at regular service intervalsProfessional installation recommended Incorrect chain tension or misalignment may affect drivetrain longevity. Summary The Rolon Brass Chain & Sprocket Kit is a platform-specific final-drive replacement set engineered for Royal Enfield J-platform 350 motorcycles including the Meteor 350, Hunter 350, and Classic 350 (Reborn). With a brass-coated steel chain and hardened OEM-spec sprockets, the kit maintains correct pitch alignment, tooth engagement, and drivetrain load distribution defined for the J-series platform. Strictly for J-platform models.Matched set replacement.Correct geometry. Reliable final drive. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

Read more less

The NGage Hyper Flow Air Filter for Royal Enfield UCE 350 and UCE 500 is a reusable performance air filter element developed for Royal Enfield motorcycles built on the UCE (Unit Construction Engine) platform. This air filter is designed as a direct replacement for the stock paper air filter used in select Royal Enfield 350 cc and 500 cc models. This listing covers only the NGage Hyper Flow Air Filter specified for Royal Enfield UCE 350 and UCE 500 motorcycles, as shown on the manufacturer’s product page and compatibility panel. Designed for Royal Enfield UCE Engines NGage specifies this Hyper Flow Air Filter for motorcycles using the Royal Enfield UCE engine architecture. These engines were used across multiple Royal Enfield models in both 350 cc and 500 cc displacements. As per the compatibility list displayed on the product page, this air filter is suitable for the following motorcycles: Royal Enfield Classic 350 (UCE) Royal Enfield Thunderbird 350 Royal Enfield Bullet 350 Royal Enfield Electra 350 Royal Enfield Classic 500 Royal Enfield Thunderbird 500 Royal Enfield Bullet 500 This air filter is intended to replace the stock air filter element in the factory airbox of these motorcycles without modification. Hyper Flow Cotton Gauze Filter Construction NGage classifies this product as a Hyper Flow Air Filter using a cotton gauze-based filtering medium. From the product information shown: The filter media is described as cotton gauze. The cotton gauze is supported by a molded filter structure designed to maintain its shape inside the factory airbox. The cotton material is described as washable and reusable. NGage does not publish pore size, filtration micron rating, airflow percentage improvement, or comparative efficiency values versus the OEM paper filter. No quantitative airflow or power increase figures are stated by the manufacturer. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is described as a washable and reusable air filter element. Unlike disposable paper air filters that are replaced at each service interval, this filter is intended to be cleaned and reused periodically according to maintenance needs. The product page shows an optional accessory: Air Filter Recharge Oil (optional add-on) This indicates that the filter is designed to be serviced using a cleaning and re-oiling process, similar to conventional cotton-gauze performance air filters. NGage does not publish a fixed cleaning interval.Service frequency will depend on: Riding environment Dust levels Road conditions Mileage covered Intended Function Air filters regulate the flow of intake air into the engine while trapping dust and debris. As stated on the product page: The filter is designed to allow improved airflow compared to stock paper filters. The cotton gauze material is described as enabling airflow while capturing dirt and debris. The filter is intended to protect the engine from contaminants while maintaining intake airflow. NGage does not publish any claims regarding: Horsepower increase Torque gain Fuel economy improvement Emissions reduction This air filter is not positioned as a tuning or racing-only component. Fitment and Installation The NGage Hyper Flow Air Filter is designed as a direct-fit replacement for the stock air filter used in Royal Enfield UCE 350 and 500 motorcycles listed in the compatibility section. No cutting, trimming, or airbox modification is shown or stated. The product page indicates: Hassle-free installation Direct stock replacement No installation tools or fitting complexity are specified by NGage. Durability and Testing From the icons and text shown on the product page, NGage states: Best durability Eco-friendly product 100% organic cotton as filtering media Extensively tested on all terrains Lifetime replacement warranty (10,000 km) No further test methodology, cycle counts, or laboratory data are published. Compatibility As per the NGage product page and compatibility panel: Royal Enfield UCE 350 Models Classic 350 Thunderbird 350 Bullet 350 Electra 350 Royal Enfield UCE 500 Models Classic 500 Thunderbird 500 Bullet 500 Variant Explanation This listing is for NGage Hyper Flow Air Filter for Royal Enfield UCE 350 & 500 only. No alternate sizes, shapes, or engine-specific variants are shown or specified on the manufacturer’s product page. Specifications (Only Verified Data) Brand: NGage Product Type: Hyper Flow Air Filter Filter Media: Cotton gauze Reusable: Yes Washable: Yes Recharge Oil Required: Yes (optional add-on) Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Royal Enfield UCE 350 & 500 models Warranty: Lifetime replacement warranty (10,000 km) Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Royal Enfield UCE 350 and UCE 500 motorcycles listed above. Designed to fit inside the stock airbox. Clean and re-oil the filter using suitable air filter cleaning solution and recharge oil. Service frequency depends on riding conditions and dust exposure.

Read more less

The N-Gage Hyper Flow Air Filter for Honda CB350 is a performance-oriented replacement air filter designed specifically for motorcycles built on Honda’s CB350 platform. This includes the Honda CB350, H’ness CB350, and CB350RS, all of which share similar intake architecture and engine characteristics. Air filtration plays a critical role in how an engine breathes, responds, and performs over time. On modern single-cylinder motorcycles, airflow consistency and effective dust filtration directly influence throttle smoothness, combustion stability, and long-term reliability. The N-Gage Hyper Flow Air Filter is designed to improve intake efficiency while continuing to protect the engine in everyday riding conditions. High-Flow Cotton Gauze Filtration Design This air filter is constructed using premium organic cotton gauze, layered to balance airflow and filtration efficiency. Cotton gauze filters are commonly used in performance applications because they allow increased air volume compared to disposable paper filters when properly maintained. The filter is factory pre-oiled, which helps capture fine dust particles while still allowing higher airflow through the intake system. This design supports smoother air delivery under varied riding conditions, including city traffic, highway cruising, and longer touring rides. Designed for Honda CB350 Engines The N-Gage Hyper Flow Air Filter is designed specifically for Honda’s CB350-series motorcycles. Fitment is based on the stock airbox used on the CB350, H’ness CB350, and CB350RS models. Because the filter matches factory mounting points and dimensions, it installs as a direct replacement. No cutting, drilling, or modification is required during installation. The original intake layout and sealing surfaces are retained, ensuring proper airbox integrity and weather protection. Throttle Response and Ride Behaviour Improved airflow can contribute to smoother throttle response and more predictable engine behaviour. Riders often choose high-flow air filters to reduce intake restriction, especially during acceleration and sustained cruising. As per manufacturer intent, the N-Gage Hyper Flow Air Filter is designed to work with the stock ECU and exhaust system. No tuning or remapping is required for installation under standard riding conditions. Actual riding feel may vary depending on riding style, fuel quality, maintenance, and overall engine condition. Washable and Reusable Construction Unlike disposable paper air filters that require periodic replacement, this air filter is washable and reusable. With proper cleaning and re-oiling using suitable filter maintenance products, the filter can be reused multiple times over its service life. This makes it a practical option for riders who prefer long-term ownership solutions and want to reduce recurring consumable replacements. Regular maintenance is essential to ensure consistent filtration performance and engine protection. Built for Indian Riding Conditions Honda CB350 motorcycles are commonly used across mixed riding environments. These include daily commuting, highway riding, and touring routes that may involve dust and changing weather. The N-Gage Hyper Flow Air Filter is designed to maintain consistent airflow and filtration across such conditions. Riders should adjust cleaning intervals based on riding environment, especially in dusty regions. Installation and Maintenance Installation follows the same process as replacing the stock air filter and does not require special tools. Riders should ensure the filter is seated correctly within the airbox and that sealing surfaces are clean during installation. For best results, cleaning and re-oiling should be carried out at recommended intervals using appropriate air filter cleaning products. Over-oiling or improper maintenance may affect filtration efficiency. Compatibility This air filter is compatible with the following motorcycles: Honda CB350 Honda H’ness CB350 Honda CB350RS Compatibility is based on stock intake configurations for these models. What’s Included The package includes one N-Gage Hyper Flow Air Filter, factory pre-oiled and ready for installation. Long-Term Ownership and Practical Use The N-Gage Hyper Flow Air Filter is intended for riders who prioritise consistent performance over long-term ownership rather than short-term gains. By maintaining stable airflow and effective filtration, the filter supports predictable engine behaviour across daily use and extended riding cycles. For motorcycles like the Honda CB350 series, which are often used for commuting, highway cruising, and touring, intake consistency plays an important role in engine smoothness and fuel delivery. A properly maintained air filter helps ensure that the intake system continues to function as designed over time. Riders are advised to inspect the filter periodically, especially when riding in dusty or humid conditions. Cleaning intervals may vary depending on usage and environment. When serviced correctly using suitable cleaning and re-oiling products, the filter can continue to deliver reliable intake performance without affecting the motorcycle’s original intake design.

Read more less

Powerage Slip-On Exhaust, Brushed Steel Finish for Royal Enfield Himalayan 411 Unleash the full potential of your Royal Enfield Himalayan 411 with the Powerage Slip-On Exhaust, Brushed Steel Finish, engineered for riders who demand stronger mid-range pull, sharper throttle response, and a deeper, more authoritative exhaust note without compromising reliability. Designed specifically for the Himalayan 411 platform, this slip-on exhaust system enhances exhaust gas evacuation while maintaining the precise back-pressure required for usable torque delivery. The result is a cleaner, more responsive power curve with improved throttle control across city traffic, highway cruising, and demanding off-road terrain. Crafted from high-grade stainless steel, finished in a premium brushed steel outer sleeve, and paired with a black powder-coated end cap, the Powerage Slip-On combines durability with a rugged, adventure-ready aesthetic. It resists corrosion, withstands repeated heat cycles, and maintains structural integrity under vibration-heavy riding conditions. Engineered for Real-World Torque The Himalayan 411 thrives on accessible torque rather than peak dyno figures. This exhaust is tuned accordingly. The internal baffle structure is calibrated to: • Maintain optimal back pressure• Improve throttle response consistency• Enhance mid-range torque feel• Deliver smoother roll-on acceleration• Support stable combustion under load Instead of chasing aggressive top-end spikes, the Powerage Slip-On improves how the bike feels in practical riding scenarios. Climbing gradients, navigating traffic, overtaking on highways, or riding fully loaded, throttle input becomes more predictable and controlled. Acceleration feels cleaner. Gear transitions feel more deliberate. Low-speed modulation improves in off-road conditions where traction sensitivity matters. Sound Profile, Deep, Controlled, Mechanical This is not a shrill or hollow exhaust note. The Powerage Slip-On produces a deep, bass-oriented exhaust tone that complements the Himalayan’s long-stroke single-cylinder engine. The sound remains full-bodied and mechanical without excessive rasp or metallic sharpness. Included is a removable dB reducer, allowing you to tailor output depending on: • Urban commuting• Long-distance touring• Trail riding• Local sound compliance requirements With the dB killer installed, the tone remains controlled and road-friendly.Without it, the exhaust develops a fuller, more assertive presence while retaining tonal depth. Construction & Material Integrity Each unit is handcrafted and dyno-tested to ensure consistent performance output and manufacturing quality. Material & Build Highlights: • Full stainless steel construction for rust resistance• Brushed steel finish for long-term durability• Black powder-coated end cap for added heat resistance• Reinforced weld joints for structural stability• Vibration-resistant mounting configuration• Heat-stable internal baffle assembly The brushed exterior ages gracefully and maintains a premium appearance even after exposure to mud, dust, rain, and long-distance touring. This is built for Indian riding conditions, high ambient temperatures, varied terrain, and extended operating hours. Direct Bolt-On Fitment Installation is straightforward and non-invasive. • No cutting• No welding• No ECU remap required• Uses factory mounting points The system is engineered as a direct replacement slip-on exhaust for the Royal Enfield Himalayan 411. Fitment alignment ensures correct clearance with frame components, swingarm movement, and rear suspension travel.As confirmed by Powerage technical support, this exhaust is also compatible with the Royal Enfield Scram 411 platform. All required mounting hardware (nuts, bolts, clamps) is included as supplied by the manufacturer. The entire process remains reversible if needed. Ride Experience Transformation Post-installation improvements are felt more than measured. • Stronger low-to-mid RPM response• More engaging throttle feel• Cleaner power delivery under load• Deeper mechanical exhaust character• Reduced stock exhaust weight• Sharper visual presence The Himalayan shifts from subdued to confident. Not louder for the sake of noise, but tuned for presence and response. This is an upgrade focused on riding feel, not just decibels. Technical Specifications Material: Stainless SteelFinish: Brushed Steel with Black Powder-Coated End CapFitment: Royal Enfield Himalayan 411Installation Type: Direct Bolt-OnSound Control: Removable dB Reducer IncludedDesign: Back-pressure optimized internal baffle systemApplication: Road and off-road use What’s Included • Powerage Slip-On Exhaust (Brushed Steel Finish)• Stainless steel mounting hardware• Removable dB reducer Warranty & Authenticity This product is covered under the official manufacturer warranty as per Powerage policy. RawTorque supplies genuine products sourced through authorized distribution channels. RawTorque does not provide independent warranty coverage beyond the manufacturer’s terms. For complete details, refer to the Warranty Policy.

Read more less

FuelX Pro+ Advanced Smart Autotune Module for Royal Enfield | 10 Dynamic Maps | Handlebar Switch | Plug & Play Maximize your Royal Enfield’s performance with precision.The FuelX Pro+ Advanced Smart Autotune Module is a plug-and-play fueling solution engineered specifically for Royal Enfield motorcycles. It is designed for riders who want smoother throttle response, refined power delivery, and real-time fueling optimization, without flashing the ECU or visiting a dyno. Unlike static fuel controllers, FuelX Pro+ continuously reads engine data and automatically adjusts the air-fuel ratio while you ride. The result is cleaner acceleration, reduced jerks at low RPM, and improved ride smoothness across city traffic, highways, and mountain roads. Advanced Autotune Control, 10 Dynamic Maps FuelX Pro+ features 10 Dynamic Autotune Maps, allowing riders to select their preferred fueling character. Each map offers a different response profile, ranging from smooth touring behavior to sharper throttle engagement. The included Handlebar Map Switch lets you change maps on the go. No laptop. No external device. No workshop visit. Simply select your map and feel the difference instantly. This flexibility makes FuelX Pro+ suitable for riders who commute daily, tour long distances, or ride aggressively on open highways. Real-Time Adaptive Fueling Technology At the core of the FuelX Pro+ system is its Auto Adapt technology. The module continuously analyzes engine operating parameters and automatically adjusts fueling in real time. This helps compensate for: • Altitude variations• Temperature changes• Aftermarket exhaust upgrades• Free-flow air filters• Riding load differences Instead of running too lean or inconsistent, your motorcycle maintains a stable and optimized air-fuel ratio. This results in smoother engine behavior, cooler running temperatures, and improved throttle refinement. Improved Ride Feel & Throttle Response FuelX Pro+ is engineered to enhance everyday ride quality. Riders typically experience: • Sharper throttle precision• Reduced engine hesitation• Smoother low-RPM tractability• Cleaner roll-on acceleration The manufacturer states up to 25% improved throttle precision and significantly enhanced acceleration response. These gains focus on real-world rideability rather than peak dyno numbers. This module is not marketed as a race ECU replacement. It is a smart adaptive fueling system built for usable performance. Plug-and-Play Installation Installation is fully non-intrusive and reversible. The module connects directly to the stock wiring harness using OEM-style connectors. There is no wire cutting, no ECU rewriting, and no permanent modification required. Install the unit, mount the switch, select your map, and ride. Professional installation is recommended if you are unfamiliar with motorcycle electrical systems, but experienced riders can complete installation with standard tools. Durable Automotive-Grade Construction FuelX Pro+ is built using automotive-grade electronic components. The compact control unit is weather-resistant, vibration-resistant, and heat-resistant. The harness features protective braided sleeving, ensuring durability under long touring conditions and harsh weather exposure. Designed for real riding conditions, not just showroom specs. Compatibility, Royal Enfield Motorcycles FuelX Pro+ is compatible with a wide range of Royal Enfield motorcycles. Fitment varies by model and generation. Common compatible platforms include: • Himalayan 450 • Guerrilla 450• Classic 350 /500• Meteor 350 / Hunter 350 / Bullet 350• Interceptor 650• Continental GT 650• Bear 650• Super Meteor 650• Himalayan 411  Always select your exact motorcycle model and year before purchase to ensure proper fitment. Who Is This For? FuelX Pro+ is ideal for riders who: • Want smoother throttle control• Have installed a free-flow exhaust or air filter• Ride in varying altitudes• Experience lean fueling hesitation• Prefer adaptive performance without ECU flashing It is not a racing ECU or ignition timing modifier. It is an intelligent fueling optimizer built for street and touring motorcycles. What’s Included • FuelX Pro+ Smart Autotune Module• Handlebar Map Switch• Model-specific plug-and-play harness• Manufacturer documentation Only components listed above are included. Specifications Brand: FuelXModel: Pro+Type: Advanced Smart Autotune ModuleMaps: 10 Dynamic Autotune MapsSwitch: Handlebar Map Switch IncludedInstallation: Plug-and-PlayConstruction: Weather & Heat ResistantWarranty: 2-Year Manufacturer Warranty

Read more less

FuelX Lite Smart Autotune Module for Royal Enfield | Plug & Play Ride Refinement | Real-Time AFR Optimization Ride Smarter. Feel the Tune. The FuelX Lite Smart Autotune Module for Royal Enfield motorcycles is engineered for riders who want smoother throttle response, refined ride quality, and optimized engine performance, without ECU remapping or complex tuning tools. This is a true plug-and-play fuel optimizer designed to enhance everyday rideability while preserving factory reliability. Unlike traditional piggyback ECUs that require map selection or manual adjustments, the FuelX Lite continuously monitors and corrects the air, fuel ratio in real time. The result is improved combustion efficiency, reduced engine jerks, and noticeably smoother acceleration across city traffic, highway cruising, and changing riding conditions. What FuelX Lite Actually Does Modern Royal Enfield motorcycles are tuned lean from the factory to meet emission norms. A lean air, fuel mixture can sometimes cause abrupt throttle response, engine heat buildup, or minor hesitation during low-RPM riding. The FuelX Lite Smart Autotune Module automatically adjusts fueling within safe operating limits. It enriches the mixture where necessary and stabilizes it across RPM ranges. This leads to: Smoother throttle pickup Reduced on, off jerks in traffic Cooler engine operation More consistent power delivery There are no selectable maps, no handlebar switches, and no manual intervention required. The module self-calibrates based on riding style and environmental conditions. Real-World Riding Benefits The difference is most noticeable in stop-and-go traffic and low-speed maneuvering. Riders often experience smoother roll-on acceleration and improved clutch-throttle coordination. On highways, the bike feels more composed and refined during steady cruising. FuelX Lite also compensates for altitude changes and temperature variations, maintaining optimal air, fuel balance whether you’re riding in coastal humidity or mountain terrain. This is not a race tuning device. It is a ride refinement module built for daily usability. Engine Temperature & Efficiency By optimizing fueling, the FuelX Lite Smart Autotune Module helps stabilize combustion temperatures. Improved mixture balance can contribute to smoother engine operation and reduced heat stress during prolonged riding. The module works within the motorcycle’s stock ECU parameters. It does not override safety protocols or require permanent changes to the wiring harness. Plug & Play Installation Installation is simple and fully reversible. No ECU flash required No dyno tuning needed No wire cutting No permanent modification The unit connects inline with factory connectors and installs in minutes. It integrates seamlessly with the stock system and can be removed without leaving any trace. The compact, sealed construction ensures durability in heat, vibration, dust, and rain conditions typical of Indian riding environments. Build Quality & Durability The FuelX Lite module is manufactured using automotive-grade components, ensuring long-term reliability. The wiring harness features high-quality connectors designed for vibration resistance and weather protection. The module housing is sealed to withstand: Heat from the engine bay Exposure to rain and humidity Regular road vibration Daily commuting stress This is a durable electronics unit engineered for real-world use, not a fragile aftermarket gadget. Compatibility The FuelX Lite Smart Autotune Module for Royal Enfield motorcycles is available for multiple models, including: Royal Enfield Himalayan 450 Royal Enfield Guerrilla 450 Royal Enfield Classic 350 Royal Enfield Hunter 350 Royal Enfield Meteor 350 Other compatible Royal Enfield variants (select model before purchase) Always choose your exact motorcycle model and year from the product options to confirm correct fitment. Who Is This For? FuelX Lite is ideal for riders who: Want smoother throttle without aggressive tuning Prefer improved ride refinement over peak power claims Ride daily in traffic conditions Tour long distances Want plug-and-play simplicity If you are looking for multi-map customization, advanced switching, or aggressive tuning adjustments, FuelX Pro is the appropriate upgrade. FuelX Lite focuses strictly on automatic refinement. Warranty & Authenticity This product is covered under the official manufacturer warranty as per FuelX brand terms. RawTorque supplies only 100% genuine FuelX Smart Autotune Modules, sourced through authorized distribution channels. RawTorque does not provide independent warranties beyond the manufacturer’s coverage. Please refer to our official Warranty Policy for full details.

Read more less

Maddog Fork Clamp, Auxiliary Light Mount (Pair) Fits 48mm to 65mm Fork Tubes | 3D Axis Adjustable | Rubber-Lined Grip The Maddog Fork Clamp mounts auxiliary lights directly on your motorcycle's fork tubes, keeping them low, close to the headlight and pointed where the front wheel is going. It is a clean way to add lights on bikes without a crash guard, or when you want the lights to turn with the handlebar. Tube Diameter: 48mm to 65mm Maddog specifies this clamp for fork tubes between 48mm and 65mm in diameter. Measure the section of the fork where you plan to mount the lights before ordering. On a conventional telescopic fork, the lower slider is usually wider than the upper stanchion, so the diameter can differ depending on where you clamp. Secure, Scratch-Free Grip Silicone strips line the inside of each clamp. They stop metal-to-metal contact with the fork finish and add friction, so the clamp holds its position through vibration and broken roads. 3D Axis Adjustable Shelf An optional, fully rotatable mounting shelf lets you set the light angle on all three axes, so you can aim the beam correctly for your bike's stance. Specifications Brand: Maddog Industries Fork tube diameter: 48mm to 65mm Material: polypropylene, powder coated finish In the box: 2 clamps, screw set, 2 silicone strips Compatible with: most auxiliary lights with a standard single-bolt mount

Read more less

Sprint Filter CM231P14 Air Filter for Royal Enfield J-series 350 The J-series 350 is the most common motorcycle in this catalogue and the one that sees the most dust. The Sprint Filter CM231P14 covers the whole platform. It drops straight into the factory airbox and replaces the paper element for good. A dry filter, not an oiled one Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it. Sprint Filter's P14 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine. The numbers Sprint publishes Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective: Filtration: traps debris down to 14 microns Airflow: 1,800 litres per square metre per second Media: dry non-woven filtering media Servicing: dry, compressed air only Which Sprint grade is right for you Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave: P08: 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces. P14 (this filter): 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use. T12: 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions. Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike. Built to outlast the service schedule Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the CM231P14 is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably. The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size. Fitment guidance Sprint catalogue the CM231P14 for: Royal Enfield Classic 350 (2022 onwards) Royal Enfield Meteor 350 (2021 onwards) Royal Enfield Hunter 350 (2022 onwards) Royal Enfield Bullet 350 (2023 onwards) Royal Enfield Goan Classic 350 (2025 onwards) It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order. Technical specifications Brand: Sprint Filter Part number: CM231P14 Media grade: P14 Material: dry non-woven filtering media Filtration: down to 14 microns Airflow: 1,800 l/m²/sec Servicing: dry, clean with compressed air, no oiling Country of manufacture: Italy

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Honda Hornet 2.0 (200cc). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R428NORC-132-1 Front sprocket 14T (S-01-085/FB), 2 holes Rear sprocket 45T (S-02-1004), 4 holes Rolon kit reference NORC F410 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Hero XPulse 200 4V and XPulse 200 Rally Edition. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HPOR-110-1 Front sprocket 13T (S-01-179) Rear sprocket 45T (S-01-993), 4 holes Rolon kit reference HPORC F411 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance, worth having on a bike ridden in mud and water Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength The earlier XPulse 200 and 200 FI use a 38T rear and a different kit. Message us for fitment guidance if you are unsure which model you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Suzuki Gixxer SF 250 and Gixxer 250. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HPORC-108-2 Front sprocket 13T (S 02 912) Rear sprocket 40T (S 01 970), 5 holes Rolon kit reference HPORC 388 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength The V-Strom SX 250 has a longer wheelbase and takes a 114-link chain with a 6-hole rear sprocket, so it needs a different kit (HPORC 466). Message us for fitment guidance if you are unsure which model you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Royal Enfield Super Meteor 650. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520ACRC-107+1 Front sprocket 15T (S-02-1025) Rear sprocket 40T (S-02-1024), 5 holes Rolon kit reference ACRC 465NF Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Rolon is India's largest OE chain manufacturer and supplies chains and kits to motorcycle makers worldwide. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which variant you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

Read more less

CRANK1 performance brake pads for the TVS Apache RTR 160 4V, all in one place. Choose your compound (Ceramic) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the TVS Apache RTR 160 4V:RearFront fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my TVS Apache RTR 160 4V?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

CRANK1 performance brake pads for the Yezdi Roadster, all in one place. Choose your compound (Ceramic) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the Yezdi Roadster: Front Rear Front + Rear Front fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my Yezdi Roadster?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

CRANK1 performance brake pads for the Triumph Speed T4, all in one place. Choose your compound (Ceramic & Sintered) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.Ceramic vs Sintered, which should you pick?   Ceramic Sintered Best for Street & touring Aggressive / track / loaded Initial bite Smooth, progressive Strong, immediate High-heat stability Excellent Outstanding Brake dust Low Moderate Rotor wear Gentle on discs Higher Wet performance Strong Strong A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the Triumph Speed T4: Front Rear Front + Rear Front fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my Triumph Speed T4?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

NGK Iridium IX. A 0.6mm fine-wire iridium centre electrode in place of a conventional one, firing a sharper, more focused spark. On a workhorse commuter that means easier starts, a steadier idle and cleaner running, and iridium holds its gap long after a nickel plug would have widened. Direct fit. Nothing to adjust. Find your bike Yamaha  Takes 1 G5, all models Crux, all models Libero, all models Specifications Part number · DPR7EIX-9 Type · Iridium IX, 0.6mm fine wire Heat range · 7 · Gap 0.9mm, factory pre-set Conventional equivalent · DPR7EA-9 Sold as · single plug Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your bike and year and we will confirm before you order.

Read more less

Motul 7100 4T 15W-50-100% Synthetic Ester Engine Oil (2.5L) Motul 7100 4T 15W-50 is a 100% synthetic, ester-based engine oil with a strong high-temperature film for big-bore and hard-ridden engines. This 2.5L pack is the better-value choice for twin-cylinder bikes and full oil changes. Key Benefits ESTER Technology for outstanding wear protection Strong, stable 15W-50 film for hot-running engines Smooth gear shifts and reduced clutch slip (JASO MA2) 2.5L pack ideal for 650cc twins and larger engines Compatible / Recommended Vehicles Royal Enfield 650 Twins (Interceptor 650, Continental GT 650, Super Meteor 650) KTM Duke / RC 390, Bajaj Dominar 400 TVS Apache RR310, BMW G310 R/GS Air/oil-cooled big-bore bikes and track use Specification: SAE 15W-50 · JASO MA2 · API SP · 100% Synthetic · Pack: 2.5 Litre Always check your owner's manual for the manufacturer-recommended viscosity grade.

Read more less