KTM 390 Adventure / Adventure X Accessories

NGage Whisker Sintered Front Brake Pad (HBS184), KTM Duke / RC / Adventure 125-390 The NGage Whisker Sintered Front Brake Pad is engineered for KTM Duke, RC, and select Adventure motorcycles where the HBS184 front pad code is specified. Sintered metallic compound, higher friction coefficient, heat-resistant, built for riders who demand more bite and durability than ceramic. Technical Specifications Brand NGage Powerparts Series Whisker Sintered Pad Position Front Pad Code HBS184 Compound Sintered metallic Friction Coefficient ~0.55-0.65 Thermal Rating Up to ~1000°C Est. Service Life 12,000-18,000 km Supplied As Front pad set (one wheel) Sintered Compound Construction Manufactured by fusing metallic powders under high heat and pressure, creating a dense compound that maintains braking effectiveness across repeated heat cycles. Compound includes: Copper (heat dissipation), Steel/Iron (wear resistance), Brass (corrosion resistance), Graphite (high-temp lubrication), Carbon fibres, Molybdenum Disulfide MoS2 (solid lubricant under pressure). Stronger initial bite vs ceramic High heat resistance, rated to ~1000°C Consistent friction during repeated braking cycles Suitable for spirited street, highway, and mixed riding Compatibility Front brake position only. Compatible where HBS184 is specified: KTM Duke 125 / 200 / 250 / 390 KTM RC 125 / 200 / 250 / 390 KTM Adventure 250 / 390 (Gen 2) Gen 3 Adventure models use HBS164. See the Gen 3-specific listing. Pad Code Reference Front: HBS184 (this listing) | Rear: HBS163, sold separately. Installation Notes Bed in pads correctly after installation Inspect disc, caliper, and brake fluid during replacement Professional installation recommended In The Box 1 x NGage Whisker Sintered Front Brake Pad set (HBS184)

Read more less

NGage Whisker Ceramic Front Brake Pad (HB184), KTM Duke / RC / Adventure 125-390 The NGage Whisker Ceramic Front Brake Pad is engineered for KTM Duke, RC, and select Adventure motorcycles where the HB184 front pad code is specified. Street-focused ceramic compound, predictable bite, smooth modulation, rotor-friendly behaviour. Technical Specifications Brand NGage Powerparts Series Whisker Ceramic Pad Position Front Pad Code HB184 Compound Ceramic with fibre reinforcement Friction Coefficient ~0.45-0.60 Supplied As Front pad set (one wheel) Why Ceramic Compound Progressive lever feel, builds braking force smoothly without abrupt grab Stable friction response during repeated stops in city and highway riding Rotor-friendly friction surface, reduced rotor wear vs aggressive metallic compounds Lower brake noise and dust output Whisker fibre reinforcement for structural integrity and even wear Compatibility Front brake position only. Compatible where HB184 is specified: KTM Duke 125 / 200 / 250 / 390 KTM RC 125 / 200 / 250 / 390 KTM Adventure 250 / 390 (Gen 2) Gen 3 Adventure models use a different pad code (HB164). See the Gen 3-specific listing. Pad Code Reference Front: HB184 (this listing) | Rear: HB163, sold separately. Installation Notes Bed in pads correctly after installation Inspect disc condition, caliper movement, and brake fluid during replacement Professional installation recommended In The Box 1 x NGage Whisker Ceramic Front Brake Pad set (HB184)

Read more less

The BMC FM995/04 is a washable, reusable panel filter for the KTM 125 to 390 platform and its Husqvarna siblings. It replaces the paper element inside the stock airbox with no modification. Oiled cotton gauze, full moulded in a single piece with no welded joints, filtering down to 7 microns. This is the road-spec filter, balancing airflow against filtration for street and touring use. The FM995/04RACE is the higher-flow track version. Supplied pre-oiled and ready to fit. Fitment KTM 125 Duke (2017 to 2023) 200 Duke (2017 to 2024) 250 Duke (2017 to 2023) 390 Duke (2017 to 2023) 125 RC (2022 to 2024) 200 RC (2022 to 2024) 390 RC (2022 to 2024) 250 Adventure (2021 to 2024) 390 Adventure (2020 to 2024) Husqvarna Svartpilen 200 (2020 to 2023) Vitpilen 401 and 401 Aero (2018 to 2023) Husqvarna 125 and 250, India market The Svartpilen 125, Svartpilen 250 and Vitpilen 250 are built on the same KTM 125 and 250 Duke platform listed above and share its airbox, so this filter is the correct part for them. BMC lists the KTM source model rather than these India-market Husqvarnas, so treat it as fitment guidance. Send us your registration number and we will confirm. Specification Type: flat panel, direct replacement for the OEM element Dimensions: 128mm x 149mm Media: oiled cotton gauze with epoxy-coated alloy mesh Filtration: down to 7 microns Service: washable and re-oilable, supplied pre-oiled Warranty: 2 years limited

Read more less

Why Choose the Legundary Oculus Headlight Shield for KTM Adventure 390 (2025)? The Legundary Oculus Headlight Shield is designed specifically for the KTM Adventure 390-2025 model, providing structured frontal protection with a distinctive dual-tone acrylic design. This product is a single configuration featuring a Yellow and White acrylic combination.There are no separate color variants mentioned in the official listing. Model-Specific Fitment, KTM Adventure 390 (2025 Model) Designed exclusively for KTM Adventure 390-2025 model Precision-engineered for direct installation Secure mounting alignment No modification requirement mentioned Compatibility with earlier KTM Adventure 390 models is not stated and should not be assumed. Material & Construction Main structure built from Mild Steel Integrated Acrylic Shield Panel Designed for durability and impact resistance Intended to provide additional structural reinforcement to the headlight area Material thickness is not specified in the official listing and is therefore not assumed. Dual-Tone Acrylic Design (Yellow & White) This version features: Acrylic panel with Yellow and White elements Integrated dual-tone aesthetic Designed to complement the KTM Adventure styling Clarification:This product is supplied in a combined Yellow & White acrylic design. It is not available as separate yellow-only or white-only variants unless specified by the manufacturer. Protection Scope The Oculus Headlight Shield is intended to: Shield the headlight area from stones and road debris Provide added frontal protection during urban and off-road riding Add structural reinforcement without altering the motorcycle’s primary design Scope clarification:This shield is designed to reduce exposure to debris and minor impacts. It is not intended to prevent damage in high-speed collisions. Installation Designed for direct fitment Marked as easy installation Secure mounting structure Professional installation is recommended to ensure proper alignment and secure fastening. Intended Use Suitable for: Touring riders Adventure riders Urban commuting Riders seeking additional headlight protection with aesthetic enhancement Product Specifications Brand: Legundary Product Name: Oculus Headlight Shield Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Mild Steel + Acrylic Color Configuration: Yellow & White (Dual-Tone Acrylic) Installation Type: Direct Fit

Read more less

NGage Whisker Sintered Front Brake Pad (HBS164), KTM Adventure 250 / 390 Gen 3 Model-specific sintered front brake pad for KTM Adventure 250 Gen 3 and Adventure 390 Gen 3 only. Gen 3 models require the HBS164 pad profile, not interchangeable with earlier Adventure generations. Higher friction coefficient than ceramic, stronger bite, heat resistant, suited for loaded touring and demanding riding conditions. Technical Specifications Brand NGage Powerparts Series Whisker Sintered Pad Position Front Pad Code HBS164 Compound Sintered metallic Application Front disc brake system Supplied As Front pad set (one wheel) Sintered Compound Benefits Stronger initial bite vs ceramic, better suited for loaded Adventure riding High heat resistance, stable performance across repeated braking cycles Durable metallic compound maintains consistent friction output Suitable for highway, touring, and mixed riding Sintered vs Ceramic for Adventure Use Adventure riders who carry luggage, ride two-up, or tackle long highway stints will find sintered pads more suitable, the compound handles higher thermal loads without fade. For lighter daily commuting, the ceramic HB164 option offers smoother modulation and quieter operation. Compatibility Front position only. Applies strictly to: KTM Adventure 250, Gen 3 KTM Adventure 390, Gen 3 Not compatible with Gen 1 or Gen 2 Adventure models. Rear pads use a separate specification. Installation Notes Bed in pads correctly after installation Inspect disc, caliper, and brake fluid during replacement Professional installation recommended In The Box 1 x NGage Whisker Sintered Front Brake Pad set (HBS164)

Read more less

Quick answer: DP Brakes DP 623 / SDP 623 is the genuine front or rear brake pad for the Royal Enfield Himalayan 450, Guerrilla 450, Interceptor 650, Continental GT 650, Super Meteor 650, Classic 650 and more. Choose DP Standard sintered (₹3,599) for everyday street and touring use, or SDP Sport HH+ (₹4,199) for stronger bite under hard use. In stock at Rawtorque and dispatched within 1–2 business days, shipped across India.Which bikes does DP 623 fit? Royal Enfield: Bear 650 (front); Classic 650 (front); Continental GT 650 (front); Guerrilla 450 (front); Himalayan 450 (front); Interceptor 650 (front); Shotgun 650 (front); Super Meteor 650 (front) KTM: Adventure 250/390 (2025) (front) BMW: F 650 GS (2008-2012) (front); F 750 GS (2018-2023) (front); F 850 GS (2018-2020) (front); F 850 GS (2021-2023) (front); F 850 GSA (2019-2020) (front); F 850 GSA (2021-2023) (front); F 900 GS (2024 onwards) (front); F 900GSA (2024 onwards) (front); R 1200 GS (2012-2013) (rear); R 1200 GS (2017-2019) (rear); R 1200 GSA (2015-2018) (rear); R 1200 R (2015-2018) (rear); R 1200 RS (2015-2018) (rear); R 1250 GS Adventure (rear); R 1250 GS Adventure (2019-2023) (rear); R 1250 R (2019-2020) (rear); R 1250 RS (2019-2023) (rear); R 1250GS STD+HP (rear); R 1250GS STD+HP (2019-2023) (rear) Ducati: Diavel 1260/S (2019-2021) (rear); Diavel/Carbon (2011-2018) (rear); X Diavel 1260 S (2016-2020) (rear) The Continental GT 650 uses the same brake hardware as the Interceptor 650, so this pad fits both.Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 623 – DP Standard SDP 623 – SDP Sport HH+ MRP ₹3,599 ₹4,199 Compound Standard sintered, premium OEM-style replacement HH+ rated high-friction sintered compound with a ceramic heat shield; quick break-in, no fade, minimal dust Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

Read more less

Quick answer: DP Brakes DP 519 is the genuine front brake pad for the KTM 390 RC/Duke, Adventure 250/390 (till 2024), Bajaj Dominar 400, Triumph Speed 400, Scrambler 400, Aprilia RS 457 and more. MRP ₹3,499. Available on pre-order: we source it from DP's official India importer after you order and confirm the dispatch date with you.Which bikes does DP 519 fit? KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025) Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards) TVS: RR310 BMW: G 310 R & G 310 GS Aprilia: RS 457 (2024) Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundDP 519 uses DP's standard sintered compound: excellent wet and dry performance, no brake fade and long service life. Many DP part numbers include a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

Read more less

Quick answer: DP Brakes DP 622 / SDP 622 is the genuine rear brake pad for the Royal Enfield Goan Classic 350, Classic 350/500, Hunter 350, Meteor 350, Himalayan 450, Guerrilla 450 and more. Choose DP Standard sintered (₹3,499) for everyday street and touring use, or SDP Pro-MX (₹3,899) for stronger bite under hard use. In stock at Rawtorque and dispatched within 1–2 business days, shipped across India.Which bikes does DP 622 fit? Royal Enfield: Bear 650; Classic 350/500; Continental GT 650; Electra 350; Goan Classic 350; Guerrilla 450; Himalayan 411; Himalayan 450; Hunter 350; Interceptor 650; Meteor 350; Scram 411; Shotgun 650 (up to 2024); Super Meteor 650 (up to 2024); Thunderbird 350/500 KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (2025); Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025); Dominar 400 (up to 2018); NS 200; Pulsar 150/180/220; RS 200 Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards); Street Triple 675 (2013-2017); Street Triple 675R (2013-2017); Street Triple 765RS (2021-2022); Tiger 1200 Rally GT (2022 onwards); Tiger 1200 Rally Pro (2022 onwards); Tiger 850 (2020 onwards); Tiger 900 (2020-2023); Tiger 900 (2024 onwards) TVS: RR310 Suzuki: Gixxer 150; Gixxer 250; V-Strom 250 SX BMW: F 650 GS (2008-2012); F 750 GS (2018-2023); F 850 GS (2018-2020); F 850 GS (2021-2023); F 850 GSA (2019-2020); F 850 GSA (2021-2023); F 900 GS (2024 onwards); F 900 RC (2020-2023); F 900 XR (2020-2023); F 900GSA (2024 onwards); G 310 R & G 310 GS; S 1000R Sport Brembo (2014-2020); S 1000RR (2010-2018); S 1000RR (2019-2022); S 1000RR Nissin Caliper (2019-2021) Jawa: 42; 42 Bobber; Classic; FJ; Perak Aprilia: RS 457 (2024) Ducati: Monster 797 (2017-2019); Scrambler 1100 (2018-2020); Scrambler 1100 (2021 onwards); Scrambler 1100 Sport (2018-2020); Scrambler 800 (2015-2018); Scrambler 800/ICON/DARK (2019-2022); Scrambler Desert Sled (2017-2023); Scrambler Icon 800 (2023 onwards) Ather: 450X The Continental GT 650 uses the same brake hardware as the Interceptor 650, so this pad fits both.Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 622 – DP Standard SDP 622 – SDP Pro-MX MRP ₹3,499 ₹3,899 Compound Standard sintered, premium OEM-style replacement DP's premium SDP sintered compound from the Pro-MX range, for stronger bite and consistency under hard use Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

Read more less

Sprint Filter PM293P14 Air Filter for KTM Duke / Adventure and Husqvarna, 2024 onwards The current-generation KTM and Husqvarna singles rev hard and pull air fast. The Sprint Filter PM293P14 keeps the intake clean on dusty roads without the oiling routine. It drops straight into the factory airbox and replaces the paper element for good. A dry filter, not an oiled one Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it. Sprint Filter's P14 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine. The numbers Sprint publishes Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective: Filtration: traps debris down to 14 microns Airflow: 1,800 litres per square metre per second Media: dry non-woven filtering media Servicing: dry, compressed air only Which Sprint grade is right for you Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave: P08: 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces. P14 (this filter): 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use. T12: 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions. Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike. Built to outlast the service schedule Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the PM293P14 is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably. The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size. Fitment guidance Sprint catalogue the PM293P14 for: KTM Duke 125 (2024 onwards) KTM Duke 250 (2024 onwards) KTM Duke 390 (2024 onwards) KTM 390 Adventure (2024 onwards) Husqvarna Svartpilen 125 (2024 onwards) Husqvarna Svartpilen 401 (2024 onwards) Husqvarna Vitpilen 401 (2024 onwards) It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order. Technical specifications Brand: Sprint Filter Part number: PM293P14 Media grade: P14 Material: dry non-woven filtering media Filtration: down to 14 microns Airflow: 1,800 l/m²/sec Servicing: dry, clean with compressed air, no oiling Country of manufacture: Italy

Read more less

Vesrah SD-9068 Front Ceramic Brake Pads for KTM RC & Adventure 390 Product Description The Vesrah SD-9068 Front Ceramic Brake Pads are designed for KTM motorcycles that use the SD-9068 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered for smooth braking performance and reduced brake dust. The Vesrah SD-9068 front brake pads are built as a direct replacement pad set compatible with KTM motorcycles including the RC 125, RC 200, RC 250, RC 390 and Adventure 390. The ceramic compound construction is designed to deliver controlled braking feel, consistent stopping power, and dependable performance during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain stable braking response across various riding conditions. The pad compound works with the brake rotor to provide reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their KTM motorcycle, the Vesrah SD-9068 ceramic front brake pads provide a direct-fit replacement designed for street riding and regular use. Compatible Motorcycles (Front Brake) KTM RC 125KTM RC 200KTM RC 250KTM RC 390KTM Adventure 390 Specifications Brand: VesrahPad Code: SD-9068Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

The 66bhp Venta is an ultra premium floating front rotor for the KTM Adventure 390, for riders who want a measurable gain in braking feel without a workshop visit. It installs in place of the original disc with no cutting, drilling or alteration.The rotor pairs a lightweight aluminium inner carrier with a high carbon stainless steel outer ring, joined by floating bobbins. That floating construction lets the braking surface move laterally against the carrier by a small controlled amount, which is what gives the lever its more progressive, better resolved feel. The petal profile and large ventilation cuts move heat out during repeated braking, which matters on a loaded adventure bike coming down a long descent.Key features 5.0mm high carbon stainless steel outer ring for a consistent, heat resistant braking surface Aluminium inner carrier, reducing rotating mass against a solid disc Floating bobbin system for progressive lever feel High ventilation petal profile for heat management under repeated braking Direct replacement for the original disc, no modification required FitmentListed for the KTM Adventure 390, 2020 to 2023. Some applications need a spacer or bolt kit. Get in touch and we will help you confirm the right combination for your bike.

Read more less

Precision Ignition Upgrade for the KTM 390 Platform The NGage High Performance Spark Plug Kit is engineered to improve ignition efficiency across KTM Duke, RC and Adventure 250-390 models and the Bajaj NS400. This is not just a plug replacement, it is a complete ignition upgrade designed for smoother, cleaner and more responsive performance. Improved Combustion Efficiency Combining an NGage Double Iridium spark plug with an ultra low-resistance racing cable, a resistor spark cap and a brass splicer connector, the kit delivers: Better spark consistency Cleaner, more complete combustion Reduced misfires Smoother, More Responsive Engine Improved throttle response Better acceleration feel More stable idle Reliable in All Conditions Easier cold starts Reliable ignition in wet weather Consistent performance from city riding to track use Built for Street & Performance Use Compatible with stock and modified setups Suitable for both BS4 and BS6 motorcycles Limited warranty, designed for a service life up to 1,00,000 km Fitment This kit is designed for the following KTM Gen2 / Gen3 and Bajaj models: KTM Duke 250 (2017-2023) KTM RC 390 (2015-2025) KTM Duke 390 / 390 R KTM Adventure 250 (2020-2022) KTM Adventure 390 / R / S / X KTM Enduro 390 R KTM Svartpilen 250 KTM Vitpilen 250 Bajaj NS400 (2024-2026) WHAT'S INCLUDED NGage Double Iridium Spark Plug (VH8RTII-9, made in Japan): 1 No NGage Resistor Spark Cap (LD05F-B, 5kΩ): 1 No NGage Racing Spark Plug Cable, ultra low resistance: 1 No NGage Brass Splicer Connector: 1 No

Read more less

NGage Whisker Ceramic Front Brake Pad (HB164), KTM Adventure 250 / 390 Gen 3 Model-specific front brake pad for KTM Adventure 250 Gen 3 and Adventure 390 Gen 3 only. KTM revised the front pad profile in the Gen 3 platform update, earlier generations use HB184, not HB164. Confirm your generation before ordering. Technical Specifications Brand NGage Powerparts Series Whisker Ceramic Pad Position Front Pad Code HB164 Compound Ceramic with whisker fibre reinforcement Friction Coefficient ~0.45-0.60 Application Front disc brake system Supplied As Front pad set (one wheel) Why Gen 3 is Different The KTM Adventure 250/390 Gen 3 update revised the front brake caliper configuration, changing the pad shape required. HB164 pads are profile-matched to the Gen 3 caliper, correct alignment, even disc contact, consistent braking response. Using the wrong pad profile can cause uneven wear, noise, and inconsistent stopping. Ceramic Compound Benefits Progressive front brake engagement, builds smoothly under pressure Predictable lever feedback for controlled deceleration Reduced brake noise vs metallic pads Rotor-friendly friction surface Suitable for daily commuting, highway, and touring Compatibility Front position only. Applies strictly to: KTM Adventure 250, Gen 3 KTM Adventure 390, Gen 3 Not compatible with Gen 1 or Gen 2 Adventure models. Rear pads use a separate specification. Installation Notes Bed in pads correctly after installation Inspect disc, caliper movement, and brake fluid during replacement Professional installation recommended In The Box 1 x NGage Whisker Ceramic Front Brake Pad set (HB164)

Read more less

NGage Whisker Sintered Rear Brake Pad (HBS163), KTM Duke / RC / Adventure 125-390 The NGage Whisker Sintered Rear Brake Pad is engineered for KTM Duke, RC, and select Adventure motorcycles where the HBS163 rear pad code is specified. Higher friction coefficient than ceramic, stronger bite, better heat resistance, suited for riders who push harder or ride in demanding conditions. Technical Specifications Brand NGage Powerparts Series Whisker Sintered Pad Position Rear Pad Code HBS163 Compound Sintered metallic Friction Coefficient ~0.55-0.65 Thermal Rating Up to ~1000°C Est. Service Life 12,000-18,000 km Supplied As Rear pad set (one wheel) Sintered vs Ceramic, Which to Choose Sintered pads offer stronger initial bite, better heat resistance, and consistent performance under repeated braking. Choose sintered if you ride hard, carry luggage, or frequently ride in stop-and-go traffic where brakes cycle through heat repeatedly. Choose ceramic (HB163) for smoother modulation and quieter operation in regular commuting. Compatibility Rear brake position only. Compatible where HBS163 is specified: KTM Duke 125 / 200 / 250 / 390 KTM RC 125 / 200 / 250 / 390 KTM Adventure 250 / 390 Pad Code Reference Rear: HBS163 (this listing) | Front: HBS184, sold separately. Installation Notes Rear pad only, front pads sold separately Bed in pads correctly after installation Inspect disc, caliper, and fluid during replacement In The Box 1 x NGage Whisker Sintered Rear Brake Pad set (HBS163)

Read more less

NGage Whisker Ceramic Rear Brake Pad (HB163), KTM Duke / RC / Adventure 125-390 The NGage Whisker Ceramic Rear Brake Pad is engineered for KTM Duke, RC, and select Adventure motorcycles where the HB163 rear pad code is specified. Ceramic compound tuned for smooth modulation, controlled deceleration, and chassis stability, exactly what rear braking demands. Technical Specifications Brand NGage Powerparts Series Whisker Ceramic Pad Position Rear Pad Code HB163 Compound Ceramic with whisker fibre reinforcement Friction Coefficient ~0.45-0.60 Est. Service Life 15,000-25,000 km Supplied As Rear pad set (one wheel) Why Ceramic for Rear Rear braking stabilises the chassis during deceleration. Excessively aggressive rear bite can destabilise the motorcycle under downshifts or corner entry. The Whisker Ceramic compound delivers progressive rear engagement, predictable, not sharp. Smooth, progressive rear brake engagement Stable friction for city and highway riding Reduced brake noise vs metallic compounds Rotor-friendly ceramic friction surface Even wear distribution across service life Compatibility Rear brake position only. Compatible where HB163 is specified: KTM Duke 125 / 200 / 250 / 390 KTM RC 125 / 200 / 250 / 390 KTM Adventure 250 / 390 Pad Code Reference Rear: HB163 (this listing) | Front: HB184, sold separately. Installation Notes Rear pad only, front pads sold separately Bed in pads correctly after installation Inspect disc, caliper, and fluid during replacement In The Box 1 x NGage Whisker Ceramic Rear Brake Pad set (HB163)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for KTM RC & Adventure 390 Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for KTM motorcycles using the SD-953 pad shape. Manufactured by Vesrah in Japan, these pads use a ceramic composite compound designed for consistent braking performance and reduced brake dust. The SD-953 brake pads are built as a direct replacement rear brake pad set compatible with several KTM RC series motorcycles and the KTM Adventure 390. The ceramic compound construction focuses on smooth braking feel, controlled stopping power, and stable performance in everyday riding conditions. Compared to conventional brake pad materials, ceramic compounds are designed to produce lower brake dust while maintaining steady braking response. The pad material works with the brake disc to deliver predictable braking without excessive rotor wear. The Vesrah SD-953 rear brake pads are engineered for street use and are suitable for riders looking for a dependable replacement brake pad for their KTM motorcycle. Compatible Motorcycles KTM RC 125, Rear BrakeKTM RC 200, Rear BrakeKTM RC 250, Rear BrakeKTM RC 390, Rear BrakeKTM Adventure 390, Rear Brake Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

NGage Hyper Flow Air Filter (NGAGE-020KTMG3) for BS6 KTM Gen 3 Models, Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-020KTMG3) is a reusable, washable cotton-gauze air filter developed specifically for BS6 KTM motorcycles built on the Gen 3 platform. This air filter is designed as a direct replacement for the stock paper air filter used in KTM’s third-generation intake system. As stated on the official NGage product artwork, this air filter is compatible with “BS6 KTM all Gen 3 models.” NGage does not publish a model-wise compatibility breakdown (such as Duke, RC, or Adventure) for this part number. This listing therefore covers KTM motorcycles that fall under the BS6 Gen 3 platform, exactly as specified by the manufacturer. Designed for KTM BS6 Gen 3 Platform NGage specifies this Hyper Flow Air Filter for KTM motorcycles built on the Gen 3 platform. From the NGage product artwork: Fits: BS6 KTM all Gen 3 models No further segmentation by displacement or model family is provided by NGage for this part number. The filter is engineered to fit directly into the factory airbox of compatible KTM Gen 3 motorcycles without requiring cutting, trimming, or airbox modification. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-020KTMG3 as a Hyper Flow Air Filter that uses a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and published product material, the NGage Hyper Flow Air Filter NGAGE-020KTMG3 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 1.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval. Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the product artwork: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-020KTMG3: BS6 KTM motorcycles built on the Gen 3 platform (Artwork states: “Fits: BS6 KTM all Gen 3 models.”) NGage does not publish a model-wise compatibility breakdown (such as Duke, RC, or Adventure) for this part number. Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-020KTMG3 No alternate sizes, shapes, or Gen-specific variants are shown or specified on the NGage product artwork. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-020KTMG3 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: BS6 KTM Gen 3 models Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 1.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on KTM motorcycles built on the BS6 Gen 3 platform. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

Why Choose the Legundary Rotex Front Wheel Slider for KTM Adventure 390 (2025)? The Legundary Rotex Front Wheel Slider is designed specifically for the KTM Adventure 390-2025 model, providing front axle area protection during falls or minor impacts. This component is engineered for the 2025 platform and is not listed as compatible with earlier KTM Adventure 390 versions. Model-Specific Compatibility, KTM Adventure 390 (2025) Designed exclusively for KTM Adventure 390-2025 model Precision-fit front axle alignment Easy installation (as stated) No modification mentioned Compatibility beyond the 2025 model is not stated and should not be assumed. Material & Construction Constructed from High-Grade Aluminium Designed for strength and durability Built to withstand impact exposure at the axle contact point Lightweight structure to avoid unnecessary added weight Material grade specification beyond aluminium is not mentioned in the official listing. Protection Scope The Rotex Front Wheel Slider is intended to: Provide protection to the front axle area Reduce direct impact exposure during tip-overs Minimize damage in low to moderate impact situations Scope clarification:Wheel sliders are designed to reduce damage during falls. They are not intended to prevent structural damage in high-speed collisions. Finish Options Available in Black Available in Silver (Official listing shows dual-tone finish options.) Intended Use Suitable for: Adventure riding Touring riders Daily commuting Riders seeking axle-level impact protection Installation Direct fit design Easy installation (as stated) Professional installation recommended for proper torque settings Product Specifications Brand: Legundary Product Name: Rotex Front Wheel Slider Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Aluminium Finish Options: Black, Silver Application: Front Axle Protection

Read more less

Why Choose the Legundary Raptor Crash Guard (Orange) for KTM Adventure 390 (2025)? The Legundary Raptor Crash Guard, Orange is designed specifically for the KTM Adventure 390-2025 model, offering structured side protection for the engine and body panels with a bold powder-coated orange finish. This product is engineered exclusively for the 2025 model platform and is not listed as compatible with earlier KTM Adventure 390 versions. Model-Specific Fitment, KTM Adventure 390 (2025) Designed exclusively for KTM Adventure 390-2025 model Precision-engineered mounting alignment Direct fit without modification (as stated) Structured integration with factory chassis geometry Compatibility beyond the 2025 model is not mentioned and should not be assumed. Material & Construction Constructed from High-Grade Mild Steel Built for strength and durability Designed to safeguard vital components during unexpected drops or minor impacts Material thickness is not specified in the official listing and is therefore not assumed. Protection Scope The Raptor Crash Guard is intended to: Provide side protection to engine and body panels Reduce exposure during tip-overs Add structural reinforcement for touring and adventure riding Scope clarification:This crash guard is designed to reduce damage during low to moderate impact situations. It is not intended to eliminate damage in high-speed collisions. Finish & Design Powder-Coated Orange Finish Designed to complement KTM’s signature adventure styling Corrosion-resistant surface treatment Bold, high-visibility structural presence Intended Use Suitable for: Touring riders Off-road exploration Urban riding protection Riders seeking both structural protection and KTM-matching aesthetics Product Specifications Brand: Legundary Product Name: Raptor Crash Guard Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Mild Steel Finish: Orange Powder Coated Application: Engine & Frame Side Protection

Read more less

Why Choose the Legundary Gopher Luggage Carrier for KTM Adventure 390 (2025)? The Legundary Gopher Luggage Carrier (Black) is designed specifically for the KTM Adventure 390-2025 model, providing a rear-mounted platform for luggage and touring essentials. This carrier is engineered for the 2025 model platform and is not listed as compatible with earlier KTM Adventure 390 versions. Model-Specific Compatibility, KTM Adventure 390 (2025) Designed exclusively for KTM Adventure 390-2025 model Precision-engineered mounting alignment Structured for secure rear installation No modification requirement mentioned Compatibility beyond the 2025 model is not stated and should not be assumed. Material & Construction Constructed from High-Quality Mild Steel Designed for strength and long-term durability Powder-coated finish for corrosion resistance Built to withstand touring and everyday riding conditions Material thickness is not specified in the official listing and is therefore not assumed. Load & Usage Design The Gopher Luggage Carrier is intended to: Provide stable support for luggage Accommodate top boxes or tail bags Offer added storage convenience for touring riders Load capacity is not specified in the provided listing and should be confirmed before heavy-duty usage. Design & Finish Color: Black Rugged, minimal rear profile Designed to complement KTM Adventure styling Maintains adventure-oriented aesthetics Installation Designed for direct fitment Secure mounting structure Professional installation recommended for proper torque and alignment Intended Use Suitable for: Touring riders Long-distance riding Daily commuting with luggage Riders requiring additional rear storage support Product Specifications Brand: Legundary Product Name: Gopher Luggage Carrier Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Mild Steel Finish: Black Powder Coated Installation Type: Direct Fit

Read more less

Why Choose the Legundary Vector Radiator Grill for KTM Adventure 390 (2025)? The Legundary Vector Radiator Grill (Black) is designed specifically for the KTM Adventure 390-2025 model, providing front radiator protection while maintaining airflow. This product is engineered for the 2025 model platform and is not listed as compatible with earlier KTM Adventure 390 versions. Model-Specific Compatibility, KTM Adventure 390 (2025) Designed exclusively for KTM Adventure 390-2025 model Precision-cut for direct fitment Easy installation (as stated) Engineered to align with factory radiator positioning Compatibility beyond the 2025 model is not mentioned and should not be assumed. Material & Construction Constructed from High-Grade Aluminium Designed for strength-to-weight balance Lightweight structure Built to provide durability without excessive added weight Material thickness is not specified in the official listing and is therefore not assumed. Radiator Protection Function The Vector Radiator Grill is intended to: Shield the radiator from flying debris Reduce exposure to stones and road hazards Provide added protection during off-road and touring conditions It is designed to maintain optimal airflow to the radiator, supporting effective cooling performance. Scope clarification: This grill is intended to reduce impact from debris. It is not designed to prevent damage in high-speed collisions. Design & Finish Color: Black Precision-cut pattern Designed to complement KTM Adventure styling Adds a rugged, aggressive front profile Installation Direct fit design Marked as easy installation No modification mentioned Professional installation is recommended to ensure secure mounting. Intended Use Suitable for: Touring riders Off-road riders Adventure riding Riders seeking radiator protection without restricting airflow Product Specifications Brand: Legundary Product Name: Vector Radiator Grill Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Aluminium Color: Black Installation Type: Direct Fit

Read more less

Why Choose the Legundary Raptor Crash Guard for KTM Adventure 390 2025? The Legundary (LCB) Raptor Crash Guard is designed specifically for the KTM Adventure 390-2025 model, offering structured side protection for the engine and frame area. This crash guard is engineered for the 2025 model platform and is not listed as compatible with earlier versions. Model-Specific Fitment, KTM Adventure 390 (2025) Designed exclusively for KTM Adventure 390 2025 model Custom-engineered mounting structure Precision alignment with factory mounting points No modification requirement mentioned Compatibility beyond the 2025 model is not stated and should not be assumed. Material & Construction Constructed from High-Strength Mild Steel Designed for structural durability Built to safeguard vital components during unexpected drops or collisions (as stated) Material thickness is not specified in the listing and is therefore not assumed. Protection Scope The Raptor Crash Guard is intended to: Provide side protection to engine and body panels Reduce direct exposure during tip-overs Support structural reinforcement in everyday riding Scope clarification: This crash guard is intended to reduce damage during low to moderate impact situations. It is not designed to prevent damage in high-speed collisions. Finish Black powder-coated finish Designed to enhance durability and corrosion resistance Matches the KTM Adventure styling profile Intended Use Suitable for: Touring riders Off-road exploration Urban riding protection Long-distance adventure riding Product Specifications Brand: Legundary (LCB) Product Name: Raptor Crash Guard Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Mild Steel Finish: Black Powder Coated Application: Engine & Frame Side Protection

Read more less

Why Choose the Ploigos GPS Mount for KTM Adventure 390 (2025)? The Ploigos GPS Mount for KTM Adventure 390 2025 Model is designed specifically for the KTM Adventure 390 (2025 model), offering a dedicated mounting solution for GPS devices and smartphone holders. This mount is engineered for direct integration with the 2025 KTM Adventure 390 cockpit layout. It is not listed as universal. Model-Specific Compatibility, KTM Adventure 390 (2025) Designed exclusively for KTM Adventure 390-2025 model Custom fit alignment No modifications required (as stated) Engineered to integrate with the instrument cluster area Compatibility with earlier KTM 390 models is not mentioned and should not be assumed. Material & Construction Constructed from Mild Steel and Aluminium Designed for structural strength and corrosion resistance Combination build for balance between rigidity and weight The mount uses a blend of materials to provide stability while maintaining structural precision. Installation Marked as Easy Installation Custom-designed for direct fitment No modifications required (as stated) Professional installation is recommended to ensure secure mounting and correct torque. Visibility & Ergonomic Placement Positioned for clear visibility Designed not to obstruct the instrument cluster Ergonomically placed for navigation access Intended to provide improved navigation access without interfering with riding posture. Compatibility Compatible with most GPS devices Compatible with smartphone holders (as stated) Device compatibility may vary depending on mounting system used. Intended Use Suitable for: Touring riders Adventure riding Long-distance navigation use Riders requiring cockpit-mounted GPS support Finish Options Available in Black Available in Silver Product Specifications Brand: Ploigos Product Type: GPS Mount Motorcycle Compatibility: KTM Adventure 390 (2025 Model) Material: Mild Steel & Aluminium Finish Options: Black, Silver Installation Type: Direct Fit

Read more less

Front Number Plate Holder for KTM Adventure 390, Steel Brooch Mount The LCB Brooch Number Plate Holder for KTM Adventure 390 is a precision-engineered front mounting solution developed by Legundary Custom Builds for riders who demand both structural reliability and refined aesthetics. Designed specifically for the KTM Adventure 390 platform, this holder ensures secure number plate placement while preserving the motorcycle’s aggressive, adventure-focused styling. Adventure motorcycles are exposed to wind pressure, vibration, uneven terrain, and high-speed riding conditions. A poorly mounted number plate can rattle, bend, or misalign over time. The LCB Brooch Number Plate Holder is engineered to provide stable support under varied riding conditions while maintaining clean front-end integration. This is a functional mounting bracket designed for durability, not a decorative accessory. Platform-Specific Engineering The LCB Brooch Holder is designed exclusively for: KTM Adventure 390 Platform-specific design ensures: • Accurate bolt alignment• Correct radiator clearance• Stable front positioning• No structural modification required Because it is built around the KTM Adventure 390’s front geometry, installation is straightforward and maintains factory mounting integrity. Professional installation is recommended to ensure secure fitment. Heavy-Duty Mild Steel Construction The Brooch Holder is fabricated from high-grade mild steel to ensure structural rigidity and long-term durability. Material advantages include: • High resistance to bending• Stability under vibration• Strong load support• Long-term durability in mixed conditions Mild steel provides reliable strength while maintaining predictable performance under road and trail stress. The bracket’s construction helps prevent plate flutter at higher speeds. Matte Black Powder-Coated Finish The number plate holder features a matte black powder-coated surface designed for corrosion resistance and visual integration. Finish characteristics: • Rust resistance• Scratch tolerance• UV stability• Factory-style aesthetic match The matte black tone complements the KTM Adventure 390’s rugged styling without appearing bulky or intrusive. Minor surface wear over time is normal and does not impact structural integrity. Secure & Stable Mounting The LCB Brooch Number Plate Holder is engineered to: • Keep number plate firmly mounted• Reduce vibration movement• Minimize bending under wind pressure• Maintain alignment during high-speed riding Secure plate positioning enhances road compliance and prevents rattling during uneven terrain riding. Plate stability depends on proper installation and fastening. Aerodynamic & Streamlined Design Unlike oversized mounting brackets, the Brooch Holder is designed to maintain airflow and front-end balance. Design advantages include: • Minimal obstruction to radiator airflow• Reduced wind drag• Clean frontal profile• Maintained adventure styling The streamlined bracket design supports cooling efficiency by avoiding unnecessary airflow blockage. After installation, riders should confirm that radiator airflow remains unobstructed. Direct Bolt-On Installation Installation features: • Direct-fit bolt-on design• No drilling required• No welding required• Includes necessary mounting hardware Installation considerations: • Align bracket before tightening• Confirm plate sits centered• Ensure hardware is torqued properly• Periodically inspect mounting bolts Professional installation is recommended for optimal results. Built for Touring & Off-Road Use The LCB Brooch Number Plate Holder is suitable for: • Highway touring• Off-road exploration• Gravel and trail riding• Daily commuting• Adventure travel Its rigid construction ensures dependable performance across varied riding conditions. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Brooch Number Plate HolderMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: KTM Adventure 390Application: Front Number Plate MountInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Professional installation recommended.Ensure number plate positioning complies with local regulations.Inspect mounting hardware periodically.

Read more less