Collection

BMW Motorcycle Accessories

Race-grade upgrades for every bike & car

24 Products
Genuine partsGenuine performance parts
No cost EMI0% interest, easy instalments
Partial CODAdvance + balance on delivery
Secure checkout100% safe & encrypted
24 products

  • Save - Rs. 1,001.00 Valvetronic manual exhaust valve control module

    Valvetronic Valvetronic Manual Exhaust Valve Control Module (Cable-Operated)

    16 reviews

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Control Your Exhaust. On Your Terms. Your valved exhaust has two modes, you just haven't been able to use both. The Valvetronic Exhaust Valve Control Module (Manual) gives you a handlebar-mounted switch that physically opens or closes the exhaust butterfly valve whenever you want. Full roar on the open highway. Clean and quiet through the colony, toll booth, or early morning streets. No apps. No wiring. No compromise. This is the most reliable way to control a valved exhaust, because there's nothing electronic to fail. A cable connects your thumb to the valve. That's it. What This Module Does Valved exhausts come with an internal butterfly valve that changes how exhaust gases flow. When the valve is closed, gases pass through a baffled internal route, quieter, more refined. When the valve is open, gases take the free-flow path, louder, rawer, with a more aggressive exhaust note. Most valved exhausts ship without any control module. The valve stays fixed in one position. This module gives you a switch to change it, whenever you want, from the handlebar. Closed valve: Quiet, compliant, neighbour-friendly. Use it in residential areas, at idle, in traffic, on early morning rides. Open valve: The sound your exhaust was built to make. Use it on highways, open roads, or anywhere you want the full character of your exhaust to come through. Why Manual Over Electric Zero electronics. No solenoid, no servo, no wiring loom, no relay. Nothing to short, corrode, or fail over time. Works anywhere, always. The valve opens when you pull the cable. No power required. No sensor needed. Doesn't care if your bike is warm, cold, or idling. You're in control. The valve is exactly where you put it, open or closed, until you choose to change it. No automatic switching when you don't want it. Simple to install. Route the cable, connect to the valve actuator, mount the switch. No ECU tapping, no wiring diagrams, no calibration. Built to last. A cable and a switch outlast any electronic actuator on a motorcycle. Less to maintain, less to replace. How It Works A control switch mounts on your handlebar. A cable runs from the switch down to the butterfly valve actuator on your exhaust. When you flick the switch, cable tension physically rotates the valve between open and closed. The entire system is mechanical, no power draw from your bike's electrical system, no ECU communication, no mapping required. Installation requires routing the cable cleanly along the frame to the exhaust, connecting to the existing valve actuator arm, and adjusting cable tension for full travel in both directions. A standard workshop should be able to install this in under an hour on most platforms. Compatible Bikes This is a universal module: it works with any valved exhaust system that supports mechanical cable actuation, regardless of bike brand or model. Below is a verified compatibility reference across popular Indian market platforms. If your bike has a valved slip-on, this module can control it. Royal Enfield Interceptor 650 / Continental GT 650 / Classic 650 / Bear 650 Classic 350 (Reborn) / Hunter 350 / Meteor 350 Himalayan 411 / Himalayan 450 / Guerrilla 450 Scram 411 / Super Meteor 650 / Shotgun 650 KTM Duke 125 / Duke 200 / Duke 250 / Duke 390 RC 125 / RC 200 / RC 390 Adventure 250 / Adventure 390 / Adventure 390 (2025) 790 Adventure Triumph Speed 400 / Scrambler 400 X / Tiger 400 Street Triple 675 / Speed T4 Bonneville T100 / T120 / Street Twin Tiger 800 / Street Scrambler 900 Yamaha MT-15 V2 / R15 V3 / R15 V4 FZ25 / FZS25 / Fazer 25 MT-03 / R3 YZF-R1 / YZF-R6 / MT-07 Kawasaki Ninja 400 / Ninja 650 / Ninja 1000 SX Z800 / Z900 / Z900 (2026) Versys 650 / Versys-X 300 / Versys 1000 Honda CB200X / CB350 Highness / CB350RS CBR 250R / CB300R / CB300F CBR 650R / CBR 650F / CB Hornet 160R Africa Twin / NX200 Bajaj Pulsar NS200 / RS200 / AS200 / 220F Dominar 250 / Dominar 400 NS 400Z TVS Apache RR 310 / Apache RTR 200 4V Ronin BMW G 310 R / G 310 GS / G 310 RR S 1000 R / S 1000 XR / R 1000 GS Suzuki Gixxer 250 / V-Strom 250SX / V-Strom 650 GSX-R750 / GSX-S750 / GSX-R1000 Hayabusa (2021 Onwards) Ducati Scrambler 800 / Scrambler 1100 Monster 797 / Monster 1200 Hypermotard 939 / Multistrada 950 Streetfighter V4 Harley Davidson Street 750 / Street Rod X440 / X440T Forty Eight / Iron 883 Jawa / Yezdi Jawa 42 FJ / Jawa Perak Yezdi Adventure / Yezdi Roadster Hero Karizma XMR / Xpulse 200 4V / Xpulse 210 Benelli TRK 502 / TRK 502X / TNT 600i / TNT 899 This module is universal, it controls the valve mechanism, not the exhaust itself. Your exhaust must have a butterfly valve with a mechanical actuator arm. Confirm exhaust compatibility before ordering. If your bike model isn't listed but runs a valved slip-on, this module will work. What's in the Box 1 × Valvetronic Manual Control Switch (handlebar mount) 1 × Control cable assembly Mounting hardware Exhaust system not included. Module requires a compatible valved exhaust to function. Specifications Control Type: Manual (mechanical cable) Actuation: Direct cable-pull butterfly valve operation Power Required: None ECU / Wiring Integration: Not required Valve Positions: Open / Closed (user-operated) Mount: Handlebar switch with cable routing Fitment: Universal, compatible with mechanically-actuated valved exhausts Brand: Valvetronic MRP: ₹3,499 Also Available Want automatic valve switching based on RPM and throttle input? The Valvetronic Electric (Automatic) Module does exactly that, the valve opens and closes on its own as you ride. View the Electric Module →

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 5,000.00 Rs. 3,999.00 ↓ You save Rs. 1,001.00

  • Save - Rs. 2,501.00 Valvetronic Exhaust Module Switch Control Automatic electric exhaust valve controller Valvetronics guide video

    Valvetronic Valvetronic Exhaust Module Switch Control Automatic (Electric), Auto Exhaust Valve Controller

    14 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Your Exhaust. Intelligent. Automatic. The Valvetronic Electric (Automatic) Exhaust Valve Control Module brings smart valve control to your valved exhaust. The butterfly valve opens and closes automatically, no switches to flip, no cables to pull. It reads riding input and actuates the valve on its own, giving you the quiet mode when you need it and the full exhaust character when you're pushing hard. This is the premium way to run a valved exhaust. Set it and forget it. The system handles the rest. What This Module Does Valved exhausts have an internal butterfly valve that controls exhaust gas routing. Valve closed = exhaust gases take a baffled internal path, quieter, more refined note. Valve open = free-flow path, the full aggressive exhaust character your slip-on was built for. The Electric Module automates this. A solenoid or servo actuator connects to the butterfly valve. The control unit reads signals from your bike, RPM, throttle position, or a dedicated switch, and commands the valve to open or close accordingly. You get intelligent mode switching without any manual input mid-ride. Low RPM / idle / city: Valve stays closed. Quiet, controlled, compliant. Use it on early morning starts, residential areas, toll plazas, traffic jams. Higher RPM / open throttle / highway: Valve opens automatically. The exhaust opens up, the note deepens, and you get the full sound profile of your slip-on exhaust. Why Electric Over Manual Fully automatic operation. The valve transitions without any rider input. Focus on riding, the module handles valve control in the background. Seamless transitions. No fumbling with a switch mid-corner or on a highway run. The valve opens and closes at the right moment, every time. Consistent behaviour. Same switching point every ride. No forgetting to open the valve before a run or close it before entering the city. Optional override. Most configurations allow a dedicated switch for manual override if you want direct control in specific situations. Premium install. Cleaner setup than a cable system, no handlebar clutter, no cable routing along the frame. How It Works The control unit connects to your bike's wiring, typically tapping into the ignition circuit, RPM signal, or a dedicated output. When the defined threshold is crossed (RPM, throttle position, or switch activation), the unit sends a signal to an electric actuator mounted on the exhaust valve. The actuator rotates the butterfly valve between open and closed positions in milliseconds. The system draws minimal current from the battery and does not require ECU remapping, fuel map changes, or custom tuning. Installation involves wiring the control unit to the correct signal source and mounting the actuator to the exhaust valve arm. A professional auto electrician or experienced mechanic can complete the installation cleanly on most bikes in 1-2 hours. Compatible Bikes This is a universal module: it works with any valved exhaust system that supports electric or solenoid actuation, regardless of bike brand or model. Below is a verified compatibility reference across popular Indian market platforms. If your bike has a valved slip-on, this module can control it. Royal Enfield Interceptor 650 / Continental GT 650 / Classic 650 / Bear 650 Classic 350 (Reborn) / Hunter 350 / Meteor 350 Himalayan 411 / Himalayan 450 / Guerrilla 450 Scram 411 / Super Meteor 650 / Shotgun 650 KTM Duke 125 / Duke 200 / Duke 250 / Duke 390 RC 125 / RC 200 / RC 390 Adventure 250 / Adventure 390 / Adventure 390 (2025) 790 Adventure Triumph Speed 400 / Scrambler 400 X / Tiger 400 Street Triple 675 / Speed T4 Bonneville T100 / T120 / Street Twin Tiger 800 / Street Scrambler 900 Yamaha MT-15 V2 / R15 V3 / R15 V4 FZ25 / FZS25 / Fazer 25 MT-03 / R3 YZF-R1 / YZF-R6 / MT-07 Kawasaki Ninja 400 / Ninja 650 / Ninja 1000 SX Z800 / Z900 / Z900 (2026) Versys 650 / Versys-X 300 / Versys 1000 Honda CB200X / CB350 Highness / CB350RS CBR 250R / CB300R / CB300F CBR 650R / CBR 650F / CB Hornet 160R Africa Twin / NX200 Bajaj Pulsar NS200 / RS200 / AS200 / 220F Dominar 250 / Dominar 400 NS 400Z TVS Apache RR 310 / Apache RTR 200 4V Ronin BMW G 310 R / G 310 GS / G 310 RR S 1000 R / S 1000 XR / R 1000 GS Suzuki Gixxer 250 / V-Strom 250SX / V-Strom 650 GSX-R750 / GSX-S750 / GSX-R1000 Hayabusa (2021 Onwards) Ducati Scrambler 800 / Scrambler 1100 Monster 797 / Monster 1200 Hypermotard 939 / Multistrada 950 Streetfighter V4 Harley Davidson Street 750 / Street Rod X440 / X440T Forty Eight / Iron 883 Jawa / Yezdi Jawa 42 FJ / Jawa Perak Yezdi Adventure / Yezdi Roadster Hero Karizma XMR / Xpulse 200 4V / Xpulse 210 Benelli TRK 502 / TRK 502X / TNT 600i / TNT 899 This module is universal, it controls the valve mechanism, not the exhaust itself. Your exhaust must have a butterfly valve with an actuator arm compatible with electric operation. Confirm exhaust compatibility before ordering. If your bike model isn't listed but runs a valved slip-on, this module will work. What's in the Box 1 × Valvetronic Electric Control Unit 1 × Electric actuator assembly Wiring harness and connectors Mounting hardware Exhaust system not included. Module requires a compatible valved exhaust to function. Specifications Control Type: Automatic (electric / solenoid-actuated) Actuation: Electric servo / solenoid butterfly valve operation Power Required: 12V DC (motorcycle battery) ECU Integration: Signal tap, no remapping required Valve Positions: Open / Closed (auto-switching) Override: Manual switch override supported Mount: Control unit + actuator on exhaust valve arm Fitment: Universal, compatible with electrically-actuated valved exhausts Brand: Valvetronic MRP: ₹6,499 Manual vs Electric, Which One to Choose Feature Manual (₹3,499) Electric / Auto (₹6,499) Valve Control Rider-operated switch Automatic (RPM/throttle-based) Power Required None 12V (bike battery) Wiring Not required Signal tap required Install Complexity Simple Moderate Failure Points Minimal (cable only) Electronic components Best For Riders who want full manual control Riders who want a set-and-forget system Also Available Prefer a simpler, zero-electronics setup? The Valvetronic Manual Module gives you direct cable-pull control from your handlebar, no wiring, no power required. View the Manual Module →

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 10,000.00 Rs. 7,499.00 ↓ You save Rs. 2,501.00

  • Ngage Front Brake Pads for BMW G 310 R / G 310 GS / S1000R (HB 184). NGage whisker ceramic brake pad compound and specifications

    Ngage Ngage Front Brake Pads for BMW G 310 R / G 310 GS / S1000R (HB 184)

    20 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Sharper front braking for the BMW G 310 R and G 310 GS. NGage HB 184 (Whisker Ceramic) and HBS 184 (Sintered) are direct replacement front pads for the BMW G 310 R, G 310 GS and S1000R (2014 to 2024). Same shape and fit as the stock pads, so they drop straight into the original front caliper. Why riders switch to NGage Two compounds, one fit. Whisker Ceramic for smooth, quiet everyday braking, or Sintered for a harder bite and more heat tolerance. Same shape, same caliper. Whisker reinforced ceramic. Fine fibre-like whiskers in the ceramic compound add strength and keep the friction steady as the pads heat up. Rated for long life. NGage rates the Whisker Ceramic pad for up to 15,000 to 25,000 km in normal riding. ARAI tested, made in Japan. Brand new, in sealed NGage packaging, with a GST invoice. Drops straight in. Direct replacement for the stock pads. No modification to the caliper or disc. Ceramic or Sintered: which should I pick? Whisker Ceramic (HB 184) Sintered (HBS 184) Best for Daily riding, city and touring Hard riding, long descents, heavy loads, wet weather Feel Smooth, progressive bite Stronger initial bite Friction coefficient 0.45 to 0.60 0.55 to 0.65 Heat resistance Up to 650°C Up to 1,000°C Noise and dust Quieter, cleaner wheels A little more dust and noise Not sure? Most riders are happiest with the Whisker Ceramic. Pick the Sintered if you ride hard, carry a pillion and luggage often, or ride a lot in the hills and rain. Fitment (front only) BMW G 310 R G 310 GS S1000R (2014 to 2024) One pack fits one front caliper. Front and rear pads are different parts and are sold separately. Check before you order For the rear see the NGage HB 163 rear pads. Specifications Brand NGage Pad code HB 184 (Whisker Ceramic), HBS 184 (Sintered) Position Front Friction coefficient 0.45 to 0.60 (ceramic), 0.55 to 0.65 (sintered) Heat resistance Up to 650°C (ceramic), up to 1,000°C (sintered) Rated life Up to 15,000 to 25,000 km (Whisker Ceramic, normal riding, as rated by NGage) Pack contents 1 set (2 pads) for one front caliper Testing ARAI tested Made in Japan Fitting and bedding in Push the caliper pistons back gently, clean the pad slides, and fit the new pads with the friction side facing the disc. Check the disc. If it is scored, has a lip at the edge or is below its minimum thickness, replace it with the pads. Pump the lever or pedal until it is firm before you ride. Bed them in: 8 to 10 moderate stops from about 50 to 10 km/h, without coming to a full stop, then ride gently for a few minutes to let them cool. Go easy on hard braking for the first 150 to 200 km while the pads settle in. Not sure these fit your BMW? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 1,399.00 - Rs. 2,249.00↓ You save Rs. 1.00

  • New NGage Hyper Flow Air Filter NGAGE-024RTX300 for TVS Apache RTX 300, washable red cotton performance filter NGage air filter fitment: TVS Apache RTX 300, BMW G 310 (2026) and TVS Apache RR 310 (2026), up to 0.5 BHP gain

    Ngage NGage Hyper Flow Air Filter (NGAGE-024RTX300) for TVS Apache RTX 300, BMW G 310 & Apache RR 310 (2026)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    NGage Hyper Flow Air Filter for TVS Apache RTX 300, BMW G 310 & Apache RR 310 (2026) The NGage Hyper Flow Air Filter (part no. NGAGE-024RTX300) is a washable, reusable performance air filter for the TVS Apache RTX 300 adventure tourer and the 2026 BMW G 310 and TVS Apache RR 310 / RTR 310. It drops straight into the stock airbox in place of the disposable paper element, flows up to 30% more air than the stock filter, and is rated by NGage for up to 0.5 BHP more at the rear wheel. Made in India by NGage Powerparts. MRP ₹3,500, inclusive of all taxes. Key Benefits Up to 30% more airflow than the stock paper filter Up to 0.5 BHP more on wheels (NGage-stated figure) 100% organic cotton filter media that traps dust while letting the engine breathe Washable and reusable: clean, re-oil and refit instead of buying a new paper filter at every service 1,00,000 km replacement warranty from NGage Hassle-free installation: direct fit, no cutting or modification Extensively tested on all terrains: highway, city traffic and off-road trails Eco-friendly: one reusable filter replaces a stack of disposable elements Compatibility Brand Model Model year TVS Apache RTX 300 All (2025 launch onwards) BMW Motorrad G 310 series 2026 TVS Apache RR 310 2026 TVS Apache RTR 310 As listed by NGage Which NGage Filter Fits My 310? NGage makes two different Hyper Flow filters for the 310 family. Check your model year before you order: TVS Apache RTX 300 and 2026 BMW G 310 / Apache RR 310: this filter, NGAGE-024RTX300. Earlier BMW G 310 R, G 310 GS and TVS Apache RR 310: the NGage Hyper Flow Air Filter NGAGE-016BMW310. Not sure which one you need? Message us your bike model and registration year and we will confirm fitment before dispatch. How a Hyper Flow Air Filter Helps A paper filter starts restricting airflow the moment it begins to collect dust. The Hyper Flow element uses layered cotton media that holds dirt in its fibres while leaving more open area for air to pass, so the engine keeps breathing freely between services. On a fuel-injected motor like the RTX 300's, that shows up as crisper throttle response and a small gain in usable power, which NGage puts at up to 0.5 BHP on wheels. Specifications Brand NGage Powerparts Part number NGAGE-024RTX300 Product Hyper Flow Air Filter (drop-in panel filter) Filter media 100% organic cotton Airflow Up to 30% more than the stock filter Performance gain Up to 0.5 BHP on wheels Service Washable and reusable Installation Direct fit into the stock airbox Warranty 1,00,000 km replacement warranty Made in India MRP ₹3,500 (inclusive of all taxes) Options Without: NGage Hyper Flow Air Filter only. With: filter plus NGage air filter recharge oil, so you can service it yourself from day one. Installation Switch off the engine and let the bike cool. Refer to your owner's manual for airbox access. Open the airbox cover and remove the stock paper filter. Wipe out any dust or debris inside the airbox. Seat the NGage Hyper Flow filter in the airbox, making sure the rubber edge seals evenly all round. Refit the airbox cover and any panels you removed. Cleaning and Maintenance Inspect the filter at every service and clean it sooner if you ride in dust or off-road. Wash it with filter cleaner, rinse from the clean side, let it dry naturally, then apply a light, even coat of filter oil before refitting. The NGage Air Filter Cleaning & Recharge Kit has everything you need. Never use compressed air or a heat gun to dry the cotton media. More for Your Apache RTX 300 Doing a full service? Pair the filter with 66BHP Street Pro semi-ceramic brake pads for everyday riding, or the 66BHP Race Pro sintered brake pads for hard, loaded riding. See every part we stock for the bike in our TVS Apache RTX 300 accessories collection, or browse all NGage air filters for other motorcycles.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,500.00 - Rs. 4,700.00

  • New DP Brakes DP 713 brake pads, India retail pack (made in England)

    DP Brakes DP Brakes Rear Brake Pads (DP 713) for BMW M 1000RR Nissin Caliper

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 713 is the genuine rear brake pad for the BMW M 1000RR Nissin Caliper. MRP ₹3,499. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does DP 713 fit? BMW: M 1000RR Nissin Caliper (2021-2024)Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundDP 713 uses DP's standard sintered compound: excellent wet and dry performance, no brake fade and long service life. Many DP part numbers include a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,499.00

  • New DP Brakes SDP712 SDP Sport HH+ front brake pads for BMW S 1000RR and M 1000RR (Nissin caliper), product photo coming soon

    DP Brakes DP Brakes Front Brake Pads (SDP 712) for BMW S 1000RR Nissin Caliper, M 1000RR Nissin Caliper

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes SDP 712 is the genuine front brake pad for the BMW S 1000RR Nissin Caliper, M 1000RR Nissin Caliper. MRP ₹3,999. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does SDP 712 fit? BMW: M 1000RR Nissin Caliper (2021-2024); S 1000RR Nissin Caliper (2019-2021)Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundSDP 712 uses DP's SDP Sport HH+ sintered compound: HH+ rated, quick break-in, no fade, minimal dust and a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,999.00

  • New DP Brakes DP628 brake pads – DP Standard Sintered DP Brakes DP628 brake pads – DP Standard Sintered

    DP Brakes DP Brakes Rear Brake Pads (DP 628) for BMW S 1000RR, S 1000 XR

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 628 is the genuine rear brake pad for the BMW S 1000RR, S 1000 XR. MRP ₹3,499. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does DP 628 fit? BMW: S 1000 XR (2015-2019); S 1000 XR (2024); S 1000RR (2018-2019)Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundDP 628 uses DP's standard sintered compound: excellent wet and dry performance, no brake fade and long service life. Many DP part numbers include a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,499.00

  • New DP Brakes SDP585 brake pads – SDP Sport HH+ DP Brakes SDP585 brake pads – SDP Sport HH+

    DP Brakes DP Brakes Front Brake Pads (SDP 585) for BMW S 1000RR

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes SDP 585 is the genuine front brake pad for the BMW S 1000RR. MRP ₹3,999. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does SDP 585 fit? BMW: S 1000RR (2019-2022)Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundSDP 585 uses DP's SDP Sport HH+ sintered compound: HH+ rated, quick break-in, no fade, minimal dust and a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,999.00

  • New DP Brakes DP623 brake pads – DP Standard Sintered DP Brakes DP623 brake pads – DP Standard Sintered

    DP Brakes DP Brakes Front / Rear Brake Pads (DP 623 / SDP 623) for Royal Enfield Himalayan 450, Interceptor 650, Continental GT 650, Guerrilla 450, Super Meteor 650 & More

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 623 / SDP 623 is the genuine front or rear brake pad for the Royal Enfield Himalayan 450, Guerrilla 450, Interceptor 650, Continental GT 650, Super Meteor 650, Classic 650 and more. Choose DP Standard sintered (₹3,599) for everyday street and touring use, or SDP Sport HH+ (₹4,199) for stronger bite under hard use. In stock at Rawtorque and dispatched within 1–2 business days, shipped across India.Which bikes does DP 623 fit? Royal Enfield: Bear 650 (front); Classic 650 (front); Continental GT 650 (front); Guerrilla 450 (front); Himalayan 450 (front); Interceptor 650 (front); Shotgun 650 (front); Super Meteor 650 (front) KTM: Adventure 250/390 (2025) (front) BMW: F 650 GS (2008-2012) (front); F 750 GS (2018-2023) (front); F 850 GS (2018-2020) (front); F 850 GS (2021-2023) (front); F 850 GSA (2019-2020) (front); F 850 GSA (2021-2023) (front); F 900 GS (2024 onwards) (front); F 900GSA (2024 onwards) (front); R 1200 GS (2012-2013) (rear); R 1200 GS (2017-2019) (rear); R 1200 GSA (2015-2018) (rear); R 1200 R (2015-2018) (rear); R 1200 RS (2015-2018) (rear); R 1250 GS Adventure (rear); R 1250 GS Adventure (2019-2023) (rear); R 1250 R (2019-2020) (rear); R 1250 RS (2019-2023) (rear); R 1250GS STD+HP (rear); R 1250GS STD+HP (2019-2023) (rear) Ducati: Diavel 1260/S (2019-2021) (rear); Diavel/Carbon (2011-2018) (rear); X Diavel 1260 S (2016-2020) (rear) The Continental GT 650 uses the same brake hardware as the Interceptor 650, so this pad fits both.Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 623 – DP Standard SDP 623 – SDP Sport HH+ MRP ₹3,599 ₹4,199 Compound Standard sintered, premium OEM-style replacement HH+ rated high-friction sintered compound with a ceramic heat shield; quick break-in, no fade, minimal dust Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,599.00 - Rs. 4,199.00

  • New DP Brakes DP519 brake pads – DP Standard Sintered DP Brakes DP519 brake pads – DP Standard Sintered

    DP Brakes DP Brakes Front Brake Pads (DP 519) for KTM Duke 390, RC 390, Adventure 390, Duke 250, Bajaj Dominar 400, Triumph Speed 400, Scrambler 400X, Aprilia RS 457 & More

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 519 is the genuine front brake pad for the KTM 390 RC/Duke, Adventure 250/390 (till 2024), Bajaj Dominar 400, Triumph Speed 400, Scrambler 400, Aprilia RS 457 and more. MRP ₹3,499. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does DP 519 fit? KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025) Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards) TVS: RR310 BMW: G 310 R & G 310 GS Aprilia: RS 457 (2024) Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundDP 519 uses DP's standard sintered compound: excellent wet and dry performance, no brake fade and long service life. Many DP part numbers include a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking. More for your Dominar: all Dominar 400 & 250 parts · Rolon chain sprocket kit for Dominar 400 · NGK iridium 3-plug set for Dominar 400.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,499.00

  • New DP Brakes SDP528 brake pads – SDP Sport HH+ DP Brakes SDP528 brake pads – SDP Sport HH+

    DP Brakes DP Brakes Front Brake Pads (SDP 528) for BMW S 1000RR, Ducati Monster 797, Monster 821, Monster 937 & More

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes SDP 528 is the genuine front brake pad for the BMW S 1000RR, Ducati Monster 937, Monster 797, Monster 821, Multistrada V2 937, Scrambler 800/ICON/DARK and more. MRP ₹4,199. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does SDP 528 fit? BMW: F 900 RC (2020-2023); F 900 XR (2020-2023); R 1200 GS (2012-2013); R 1200 GS (2017-2019); R 1200 GSA (2015-2018); R 1200 R (2015-2018); R 1200 RS (2015-2018); R 1250 R (2019-2020); R 1250 RS (2019-2023); S 1000 XR (2015-2019); S 1000 XR (2024); S 1000RR (2018-2019) Ducati: Hypermotard 939 (2016-2018); Hypermotard 950/SP (2019 onwards); Hyperstrada 821 (2013-2015); Monster 797 (2017-2019); Monster 821 (2015-2021); Monster 937 (2021 onwards); Multistrada V2 937 (2022-2024); Panigale 899 (2014-2015); Panigale 959 (2016-2019); Scrambler 1100 (2018-2020); Scrambler 1100 (2021 onwards); Scrambler 1100 Sport (2018-2020); Scrambler 800 (2015-2018); Scrambler 800/ICON/DARK (2019-2022); Scrambler Desert Sled (2017-2023); Scrambler Icon 800 (2023 onwards); Supersport 937 (2017-2020) Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundSDP 528 uses DP's SDP Sport HH+ sintered compound: HH+ rated, quick break-in, no fade, minimal dust and a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 4,199.00

  • New DP Brakes SDP509 brake pads – SDP Sport HH+ DP Brakes SDP509 brake pads – SDP Sport HH+

    DP Brakes DP Brakes Front Brake Pads (SDP 509) for BMW S 1000RR, S 1000R Sport Brembo, Triumph Street Twin (Brembo)

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes SDP 509 is the genuine front brake pad for the BMW S 1000RR, S 1000R Sport Brembo, Triumph Street Twin (Brembo). MRP ₹6,999. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does SDP 509 fit? Triumph: Street Twin (Brembo) (2019-2022) BMW: S 1000R Sport Brembo (2014-2020); S 1000RR (2010-2018) Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundSDP 509 uses DP's SDP Sport HH+ sintered compound: HH+ rated, quick break-in, no fade, minimal dust and a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 6,999.00

  • New DP Brakes DP622 brake pads – DP Standard Sintered DP Brakes DP622 brake pads – DP Standard Sintered

    DP Brakes DP Brakes Rear Brake Pads (DP 622 / SDP 622) for Royal Enfield Classic 350, Hunter 350, Meteor 350, Himalayan 450, Interceptor 650, Continental GT 650 & More

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 622 / SDP 622 is the genuine rear brake pad for the Royal Enfield Goan Classic 350, Classic 350/500, Hunter 350, Meteor 350, Himalayan 450, Guerrilla 450 and more. Choose DP Standard sintered (₹3,499) for everyday street and touring use, or SDP Pro-MX (₹3,899) for stronger bite under hard use. In stock at Rawtorque and dispatched within 1–2 business days, shipped across India.Which bikes does DP 622 fit? Royal Enfield: Bear 650; Classic 350/500; Continental GT 650; Electra 350; Goan Classic 350; Guerrilla 450; Himalayan 411; Himalayan 450; Hunter 350; Interceptor 650; Meteor 350; Scram 411; Shotgun 650 (up to 2024); Super Meteor 650 (up to 2024); Thunderbird 350/500 KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (2025); Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025); Dominar 400 (up to 2018); NS 200; Pulsar 150/180/220; RS 200 Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards); Street Triple 675 (2013-2017); Street Triple 675R (2013-2017); Street Triple 765RS (2021-2022); Tiger 1200 Rally GT (2022 onwards); Tiger 1200 Rally Pro (2022 onwards); Tiger 850 (2020 onwards); Tiger 900 (2020-2023); Tiger 900 (2024 onwards) TVS: RR310 Suzuki: Gixxer 150; Gixxer 250; V-Strom 250 SX BMW: F 650 GS (2008-2012); F 750 GS (2018-2023); F 850 GS (2018-2020); F 850 GS (2021-2023); F 850 GSA (2019-2020); F 850 GSA (2021-2023); F 900 GS (2024 onwards); F 900 RC (2020-2023); F 900 XR (2020-2023); F 900GSA (2024 onwards); G 310 R & G 310 GS; S 1000R Sport Brembo (2014-2020); S 1000RR (2010-2018); S 1000RR (2019-2022); S 1000RR Nissin Caliper (2019-2021) Jawa: 42; 42 Bobber; Classic; FJ; Perak Aprilia: RS 457 (2024) Ducati: Monster 797 (2017-2019); Scrambler 1100 (2018-2020); Scrambler 1100 (2021 onwards); Scrambler 1100 Sport (2018-2020); Scrambler 800 (2015-2018); Scrambler 800/ICON/DARK (2019-2022); Scrambler Desert Sled (2017-2023); Scrambler Icon 800 (2023 onwards) Ather: 450X The Continental GT 650 uses the same brake hardware as the Interceptor 650, so this pad fits both.Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 622 – DP Standard SDP 622 – SDP Pro-MX MRP ₹3,499 ₹3,899 Compound Standard sintered, premium OEM-style replacement DP's premium SDP sintered compound from the Pro-MX range, for stronger bite and consistency under hard use Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,499.00 - Rs. 3,899.00

  • Rolon chain and sprocket kit in its retail box Rolon chain sprocket kit for BMW G 310 R & G 310 GS: 16T front, 40T rear, 520 chain 112 links

    Rolon Rolon Brass Chain & Sprocket Kit for BMW G 310 R & G 310 GS (BPR Kit NXRC 321)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon BPR brass-plated sealed chain and sprocket kit for the BMW G 310 R and G 310 GS. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520NXRC-112-2 Front sprocket 16T (S 02 660) Rear sprocket 40T (S 02 713A), 6 holes Rolon kit reference NXRC 321 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance, worth having on a GS that sees dirt and water Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 4,544.00 Rs. 4,530.00 ↓ You save Rs. 14.00

  • 66BHP Race Pro sintered brake pads for BMW G 310 R and G 310 RR

    66BHP 66BHP Race Pro Sintered Brake Pads for BMW G 310 R / G 310 RR

    21 reviews

    Out of stock

    Performance Braking Upgrade for BMW G 310 R & G 310 RR The 66BHP Race Pro Sintered Brake Pads are designed for BMW G 310 R and G 310 RR, delivering stronger stopping power, sharper response, and consistent braking under demanding riding conditions. Built for riders who push lightweight performance machines harder, these pads provide improved braking authority when speed and riding intensity increase. Sintered Compound Performance Race Pro pads use a sintered compound engineered for performance braking: Aggressive initial bite for immediate stopping response Stronger braking feel compared to standard pads Designed for performance-oriented riding This setup delivers sharper braking precision and control. High Heat Resistance Developed to handle sustained braking loads: Maintains braking performance under high temperatures Handles repeated braking without rapid performance drop Suitable for high-speed and aggressive riding Fade-Resistant Braking Engineered for consistent braking performance: Reduced brake fade during prolonged braking Stable stopping power across repeated braking cycles Reliable control during aggressive riding Wet and All-Weather Confidence Adapted for real-world riding environments: Stable braking response in wet conditions Predictable braking feel across varying road surfaces Improved rider confidence in unpredictable conditions Built for Performance Riding Race Pro is tuned for riders demanding sharper braking: Stronger braking authority at higher speeds Better control during aggressive riding Suitable for highway, spirited, and performance riding

    Out of stock

    Rs. 1,989.00 - Rs. 3,975.00

  • Barrel Rogue exhaust BMW G310R with subheader pipe Barrel exhaust BMW G310GS performance upgrade system

    Barrel Barrel Rogue Exhaust for BMW G 310 R / G 310 GS with Subheader Pipe (V2)

    17 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Built for the BMW 310 Platform The Barrel Rogue Exhaust with Subheader Pipe (V2) is engineered specifically for the BMW G 310 platform, including both the G 310 R and G 310 GS. This is not just a slip-on, it’s a performance-focused upgrade designed to unlock the engine’s full breathing potential. Deep, Authoritative Sound Eliminates flat stock exhaust tone Deep, punchy and aggressive sound signature Tuned for performance without uncontrolled harshness True Performance Upgrade Includes subheader pipe for improved exhaust flow Freer revving engine behavior Noticeably sharper throttle response Weight Reduction Advantage Saves approx. 1.5-5.5 kg over stock exhaust Improves agility and handling Enhances overall ride dynamics Premium Build Quality Constructed from 304 stainless steel High resistance to rust and corrosion Built for long-term performance use Rider-Controlled Sound Removable DB killer Adjust sound output based on preference Balanced between daily usability and aggressive tone Installation & Compatibility Bolt-on installation (30-45 minutes) No ECU remap required (optional for tuning gains) Compatible with both BMW G 310 R and G 310 GS Note: Minor alignment adjustments may be required depending on model variant and existing setup. What’s Included Barrel Rogue Exhaust (V2) Subheader Pipe Mounting hardware Removable DB killer Warranty Lifetime rust-free warranty 1 Year warranty on welds RawTorque Notice:This product is covered under manufacturer warranty only.RawTorque does not provide any additional warranty.Please refer to our warranty policy for full details. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 20,989.00

  • BMC FM993/20 air filter (rendered image, shape from BMC's photo of the FM993/20) BMC FM993/20 fits BMW: G 310 GS and G 310 R

    BMC BMC Air Filter for BMW G 310 GS & G 310 R (2016 Onwards) - FM993/20

    11 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    For the BMW G 310 R and G 310 GS. The BMC FM993/20 fits the 312 cc single in the BMW G 310 R and G 310 GS, the same platform as the TVS Apache RR 310. It replaces the paper element in the stock airbox and is washed and re-oiled rather than replaced. Why it is worth fitting Breathes more freely. Oiled cotton gauze flows more air than a paper element, for a cleaner throttle response. Drops straight in. It sits in the original airbox. No cutting, no remapping, no extra hardware. Lasts the life of the bike. Wash it, re-oil it and refit it, instead of buying a new paper filter at every service. Built by BMC in Italy. Full-moulded in one piece, with no glued joints to work loose. Backed by BMC. Covered by a 2 year BMC limited warranty. Fitment BMWG 310 GS and G 310 R, 2016 onwards Also listed by BMC IndiaTVS Apache RR 310 Check before you order TVS Apache RTR 310 takes the BMC FM01240. Specifications Part number FM993/20 Brand BMC Type Panel filter Size 86 x 103 mm Replaces OEM BMW 13718556564 Filter media Multi-layer oiled cotton gauze Construction Full-moulded, single piece Servicing Pre-oiled, washable and reusable Warranty 2 years, BMC limited warranty Made in Italy CareClean it when the gauze looks dirty, and sooner if you ride in heavy dust. Wash it with BMC detergent, let it dry, re-oil it with BMC regeneration fluid and refit it. Everything you need is in the BMC washing kit. Not sure it fits your bike? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 5,999.00 Rs. 5,989.00 ↓ You save Rs. 10.00

  • Vesrah SD-9068 front ceramic brake pads for BMW G310 R G310 GS G310 RR

    Vesrah Vesrah SD-9068 Front Ceramic Brake Pads for BMW G310 R, G310 GS & G310 RR

    16 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Vesrah SD-9068 Front Ceramic Brake Pads for BMW G310 and S1000R Product Description The Vesrah SD-9068 Front Ceramic Brake Pads are designed for BMW motorcycles that use the SD-9068 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver stable braking performance and reduced brake dust. The Vesrah SD-9068 front brake pads are built as a direct replacement pad set compatible with motorcycles such as the BMW G310 R, G310 GS, G310 RR and BMW S1000R. The ceramic compound construction is designed to provide smooth braking response, consistent stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain stable braking performance across regular riding conditions. The pad compound interacts with the brake rotor to deliver reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their BMW motorcycle, the Vesrah SD-9068 ceramic front brake pads provide a direct-fit replacement suitable for street riding and everyday use. Compatible Motorcycles (Front Brake) BMW G310 RBMW G310 GSBMW G310 RRBMW S1000R (2014-2018)BMW S1000R (2018-onwards) Specifications Brand: VesrahPad Code: SD-9068Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 1,925.00 Rs. 1,750.00 ↓ You save Rs. 175.00

  • Vesrah SD-953 rear ceramic brake pads for BMW G310 R G310 GS S1000R

    Vesrah Vesrah SD-953 Rear Ceramic Brake Pads for BMW G310 R, G310 GS & S1000R

    19 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Vesrah SD-953 Rear Ceramic Brake Pads for BMW G310 R, G310 GS and S1000R Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for BMW motorcycles that use the SD-953 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound developed for smooth braking response and reduced brake dust. The Vesrah SD-953 rear brake pads are built as a direct replacement brake pad set compatible with BMW G310 R, BMW G310 GS, and BMW S1000R motorcycles. The ceramic compound construction is designed to deliver consistent braking feel, stable stopping performance, and reliable everyday braking behaviour. Ceramic brake pad materials are known for producing lower brake dust and controlled braking performance, helping maintain predictable braking across regular riding conditions. The pad material interacts with the brake rotor to deliver steady braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their BMW motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement suitable for street riding and everyday use. Compatible Motorcycles (Rear Brake) BMW G310 RBMW G310 GSBMW S1000R (2014-2018)BMW S1000R (2018-onwards) Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 1,925.00 Rs. 1,750.00 ↓ You save Rs. 175.00

  • Save - Rs. 1,462.00 Legundary (LCB) BMW G310 GS Bellator Lower Crash Guard. Legundary (LCB) BMW G310 GS Bellator Lower Crash Guard.

    Legundary Legundary (LCB) BMW G310 GS Bellator Lower Crash Guard

    15 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Designed for BMW G310 GS The Legundary (LCB) BMW G310 GS Bellator Lower Crash Guard is developed specifically for the BMW G310 GS. This lower crash guard is designed to provide structural protection to the lower section of the motorcycle, including the engine area, by integrating with the factory mounting points. This is not listed as a universal crash guard. Model Compatibility Compatible with: BMW G310 GS Model-specific fitment Designed for direct mounting as per manufacturer Material & Finish Material: Mild Steel Finish: Black Mild steel construction is intended to provide durability and structural reinforcement for the lower engine area. Functional Role The BMW G310 GS Bellator Lower Crash Guard is designed to: Protect the lower engine and surrounding components Provide structural reinforcement during minor impacts Add a protective layer to the lower frame section Maintain integration with the BMW G310 GS chassis profile This product is not described as impact-proof for high-speed collisions. Installation Model-specific mounting design Intended exclusively for BMW G310 GS Professional installation recommended for proper alignment and torque Product Specifications Brand: Legundary (LCB) Product Name: BMW G310 GS Bellator Lower Crash Guard Motorcycle Compatibility: BMW G310 GS Material: Mild Steel Finish: Black

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 8,260.00 Rs. 6,798.00 ↓ You save Rs. 1,462.00

  • Save - Rs. 1,462.00 Legundary (LCB) BMW G310 GS Raptor Upper Crash Guard. Legundary (LCB) BMW G310 GS Raptor Upper Crash Guard.

    Legundary Legundary (LCB) BMW G310 GS Raptor Upper Crash Guard

    12 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Designed for BMW G310 GS The Legundary (LCB) BMW G310 GS Raptor Upper Crash Guard is developed specifically for the BMW G310 GS. This upper crash guard is designed to protect the upper section of the motorcycle, including the tank and fairing areas, by adding a structured protective frame that integrates with the motorcycle’s chassis. This is not listed as a universal crash guard. Model Compatibility Compatible with: BMW G310 GS Model-specific fitment Designed for direct mounting as per manufacturer Material & Finish Material: Mild Steel Finish: Black Mild steel construction is intended to provide structural strength and durability. Functional Role The BMW G310 GS Raptor Upper Crash Guard is designed to: Provide upper-body protection to the motorcycle Shield tank and fairing areas during minor impacts Add structural reinforcement to the upper frame section Integrate with the BMW G310 GS chassis layout This product is not described as impact-proof for high-speed collisions. Installation Model-specific mounting design Intended exclusively for BMW G310 GS Professional installation recommended for proper torque and alignment Product Specifications Brand: Legundary (LCB) Product Name: BMW G310 GS Raptor Upper Crash Guard Motorcycle Compatibility: BMW G310 GS Material: Mild Steel Finish: Black

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 8,260.00 Rs. 6,798.00 ↓ You save Rs. 1,462.00

  • Save - Rs. 904.00 Legundary (LCB) BMW G310GS Aragon Saddle Stay. Legundary (LCB) BMW G310GS Aragon Saddle Stay.

    Legundary Legundary (LCB) BMW G310GS Aragorn Saddle Stay

    12 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Designed for BMW G310GS The Legundary (LCB) BMW G310GS Aragorn Saddle Stay is developed specifically for the BMW G310GS. This saddle stay is designed to provide structured side support for mounting saddle bags and managing luggage during rides. It is not listed as a universal saddle stay. Model Compatibility Compatible with: BMW G310GS Model-specific fitment Designed for direct mounting as per manufacturer Material & Finish Material: Mild Steel Finish: Black (Powder-Coated) Mild steel construction is intended to provide structural strength and stability for supporting mounted luggage. Dimensions & Weight Dimensions: 49 x 17 x 10 cm (L x B x H) Weight: 1.925 kg Functional Role The BMW G310GS Aragorn Saddle Stay is designed to: Support saddle bags during long rides Provide structural side reinforcement for luggage mounting Offer a stable mounting frame for heavy loads Integrate with the BMW G310GS chassis layout This product is intended for luggage support and is not described as a crash guard or impact-protection component. Installation Designed specifically for BMW G310GS 3-point mounting system (as mentioned) Professional installation recommended for correct alignment Product Specifications Brand: Legundary (LCB) Product Name: BMW G310GS Aragorn Saddle Stay Motorcycle Compatibility: BMW G310GS Material: Mild Steel Finish: Black Dimensions: 49 x 17 x 10 cm Weight: 1.925 kg

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 4,899.00 Rs. 3,995.00 ↓ You save Rs. 904.00

  • NGage BNL8RTII-9 double iridium spark plug NGage BNL8RTII-9 double iridium spark plug, bare threaded terminal stud detail

    Ngage NGage BNL8RTII-9 Double Iridium Spark Plug for BMW G310 / S1000 / R1200-1300 GS / F900 GS & KTM 250

    20 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    NGage BNL8RTII-9 Double Iridium Spark Plug for BMW, KTM, Husqvarna & TVS Motorcycles (BS4 / BS6 Compatible) The NGage BNL8RTII-9 Double Iridium Spark Plug is a model-specific replacement spark plug designed for modern BMW, KTM, Husqvarna, and TVS motorcycles. This BMW motorcycle spark plug by NGage is manufactured in Japan and is listed by NGage for both BS4 and BS6 compliant motorcycles. The BNL8RTII-9 Double Iridium Spark Plug is intended as a direct replacement for motorcycles listed in the official NGage compatibility chart. It is engineered to match the ignition system requirements defined for each approved model. This listing applies only to part number BNL8RTII-9 and does not include alternate heat ranges or variants. Double Iridium Construction The NGage BNL8RTII-9 Spark Plug uses iridium on both the center electrode and the ground electrode. NGage classifies this as Double Iridium construction. Iridium is selected in spark plug manufacturing for its high melting point and resistance to erosion during repeated ignition cycles. In high-compression and fuel-injected engines, electrode durability is required for maintaining consistent spark formation. The double iridium layout is commonly used in tightly controlled combustion systems. NGage does not publish electrode dimensions, gap data, or service interval claims for this part number. The classification here follows NGage’s official product definition. Application Across Multiple Motorcycle Platforms The NGage BNL8RTII-9 Double Iridium Spark Plug is specified for use across several engine platforms. Despite differences in displacement and cylinder setup, the motorcycles listed below share ignition requirements compatible with BNL8RTII-9. This spark plug is approved by NGage for selected BMW 310, BMW 900, BMW 1000, KTM 250, Husqvarna 250, and TVS 310 platforms. Compatibility must always be confirmed before installation. BMW Motorcycle Spark Plug Compatibility As per NGage’s official application chart, the BMW motorcycle spark plug BNL8RTII-9 is listed for these BMW motorcycles: BMW G 310 RRBMW G 310 GSBMW G 310 RBMW S 1000 RRBMW S 1000 XRBMW S 1000 RBMW R 12BMW R 12 9TBMW R 1200 GSBMW R 1300 GSBMW F 900 GS AdventureBMW F 900 GS These models cover multiple engine families. NGage specifies the same part number for all motorcycles listed above. KTM, Husqvarna and TVS Compatibility The NGage BNL8RTII-9 Double Iridium Spark Plug is also listed for: KTM 250 Duke (Gen 3)Husqvarna 250 (2025 models)TVS 310 RR These motorcycles use modern fuel-injected engines with updated ignition systems. NGage confirms compatibility through its part-number chart. BS4 and BS6 Compatibility NGage states that the BNL8RTII-9 Spark Plug is compatible with both BS4 and BS6 motorcycles. This allows the same spark plug part number to be used across pre-BS6 and post-BS6 production years, provided the motorcycle appears in the compatibility listing. No claims are made about fuel efficiency, emission improvement, or power gains. This spark plug is supplied as a specification-matched replacement component. Manufacturing Origin The NGage BNL8RTII-9 Double Iridium Spark Plug is made in Japan. This detail appears on NGage packaging. No additional manufacturing certifications are published for this part number. Intended Use This NGage spark plug is intended for scheduled maintenance replacement. Install it per the motorcycle manufacturer’s recommended service intervals. It suits normal road use on approved motorcycles. The BNL8RTII-9 is not a racing-only or tuning component. It is supplied as a standard replacement spark plug where NGage’s compatibility chart specifies this part number. Installation Guidelines for BMW Motorcycle Spark Plug Install the NGage BNL8RTII-9 Spark Plug only on BMW motorcycles listed in the compatibility section. Installation should be performed on a cold engine. Torque specifications must follow the motorcycle manufacturer’s service manual. Incorrect spark plug selection can impact engine performance and reliability. Buyers must confirm compatibility before purchase. What This Listing Includes 1 × NGage BNL8RTII-9 Double Iridium Spark Plug No alternate heat range or additional components are included. Frequently Asked Questions Specifications Brand: NGagePart Number: BNL8RTII-9Spark Plug Type: Double IridiumCompatibility: BMW, KTM, Husqvarna, TVS (as listed above)Emission Compatibility: BS4 & BS6Country of Manufacture: JapanApplication: Motorcycle spark plug replacement As a final note, this BMW motorcycle spark plug is a reliable choice for replacement where the NGage chart confirms compatibility. Ensure proper installation and maintenance to keep your engine running smoothly with this BMW motorcycle spark plug. Terminal Type This plug is supplied with a bare threaded terminal stud. That is how it leaves the factory, and no terminal nut is fitted. A plug cap that screws onto the thread fits as supplied. If your cap seats on a terminal nut instead, a standard screw-on spark plug terminal nut can be fitted to the stud.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 899.00

  • NGage Hyper Flow Air Filter (NGAGE-016BMW310) – BMW G 310 R, G 310 GS & TVS Apache 310 RR Ngage NGage Hyper Flow Air Filter (NGAGE-016BMW310) – BMW G 310 R, G 310 GS & TVS Apache 310 RR Ngage

    Ngage NGage Hyper Flow Air Filter (NGAGE-016BMW310), BMW G 310 R, G 310 GS & TVS Apache 310 RR

    14 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    NGage Hyper Flow Air Filter (NGAGE-016BMW310) for BMW G 310 R / GS / RR & TVS Apache 310 RR, Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-016BMW310) is a reusable, washable cotton-gauze air filter developed for motorcycles built on the BMW, TVS 310 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the BMW G 310 RBMW G 310 GS, and TVS Apache 310 RR. Riding a TVS Apache RTX 300, or a 2026 BMW G 310 or 2026 Apache RR 310? This filter is for earlier models. Your bike takes the NGage Hyper Flow Air Filter NGAGE-024RTX300. As stated on NGage’s official product page and compatibility panel, this air filter is compatible with the following motorcycles: BMW G 310 R BMW G 310 GS TVS Apache 310 RR This listing covers these three models exactly as specified by the manufacturer. Designed for BMW G 310 R, G 310 GS & TVS Apache 310 RR NGage specifies this Hyper Flow Air Filter for motorcycles built on the BMW, TVS 310 cc platform. From the NGage product page: Suitable For: BMW 310 R BMW 310 GS BMW 310 RR TVS Apache 310 RR (Note: NGage’s compatibility panel lists “BMW 310 RR,” which refers to the BMW G 310 RR variant.) The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-016BMW310 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product page and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded rectangular filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product page and feature icons, the NGage Hyper Flow Air Filter NGAGE-016BMW310 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product page: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product page and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage product page. Warranty Information (Manufacturer-Stated) From the NGage product page and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product page and artwork: Made in India Compatibility As per NGage’s official product page and compatibility panel for part number NGAGE-016BMW310: BMW G 310 R BMW G 310 GS BMW G 310 RR TVS Apache 310 RR (The BMW G 310 RR appears in NGage’s compatibility panel as “BMW 310 RR.”) For the TVS Apache RTX 300 and 2026 BMW G 310 / Apache RR 310, see the NGage NGAGE-024RTX300 air filter. Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-016BMW310 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-016BMW310 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: BMW G 310 R, BMW G 310 GS, BMW G 310 RR, TVS Apache 310 RR Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on BMW G 310 R, BMW G 310 GS, BMW G 310 RR, and TVS Apache 310 RR motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,469.00 - Rs. 4,669.00↓ You save Rs. 31.00

Accessories for your BMW Motorrad.

Whether you ride the versatile G 310 GS, the roadster G 310 R or a bigger Motorrad, the right accessories add capability without compromising BMW's balance. Rawtorque brings together protection, touring and performance parts to match.

Explore crash guards, pannier systems, handlebar risers, touring windscreens, luggage racks and lighting for the G 310 GS, G 310 R and F-series — each chosen for quality and a clean fit.

Browse by part below. If you'd like help choosing the right upgrade for your BMW, our team is here to offer fitment guidance.

Frequently asked questions

Which BMW models do you cover?

We stock parts for BMW motorcycles including the G 310 GS, G 310 R and F-series. Each listing names the models it suits.

What are popular upgrades for the BMW G 310 GS?

Crash guards and bash plates for protection, pannier systems and touring racks for luggage, and handlebar risers and windscreens for comfort on longer rides.

Will these accessories fit my BMW?

Fitment varies by model and year. Check the product listing for compatibility, and reach out for fitment guidance if you'd like to confirm before ordering.

Do you deliver across India?

Yes — Rawtorque ships BMW motorcycle accessories pan-India.

No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000

Login

Forgot your password?

Don't have an account yet?
Create account