NGage HB 163 / HBS 163 Rear Brake Pads for Suzuki, Honda CBR 250R, Triumph Street Triple 675, Ducati, Jawa, Yezdi & BMW G 310

HB 163 / HBS 163 Rear Brake Pads, Whisker Ceramic & Sintered (Rear Only)

The NGage HB 163 and HBS 163 are disc brake pads for motorcycles whose rear brake caliper specifies this exact pad shape. They are direct-replacement components and do not alter caliper geometry, disc size, or braking system architecture.

Per the official NGage brake pad compatibility chart, the following motorcycles use this pad code at the rear:

• Suzuki Gixxer 250

• Suzuki V-Strom 250 SX

• Honda CBR 250R (non-ABS)

• Honda CBR 250R (ABS, Nissin calipers)

• Triumph Street Triple 675

• Triumph Street Triple 675 R

• Ducati Monster 797

• Ducati Scrambler

• Jawa 42

• Jawa Classic

• Yezdi Roadster

• Yezdi Adventure

• BMW G 310 R

• BMW G 310 GS

• BMW S1000R (2014-2024)

Note. Royal Enfield, KTM, Bajaj, Triumph 400 and Ather riders are served by their own HB 163 listings on this store.

Pad code and fitment logic

A pad code defines the physical shape and mounting interface of the pad. Only pads carrying the matching code belong in a given caliper.

• HB 163 is the Whisker Ceramic compound.

• HBS 163 is the Sintered compound.

Both share identical dimensions, backing plate profile and mounting points. Only the friction material differs. Fitting a pad of a different shape can cause improper seating, uneven wear, noise, reduced braking efficiency or damage to the brake system.

Choosing between the two compounds

HB 163, Whisker Ceramic. A ceramic friction compound reinforced with whisker filament, blended with ceramic, mineral and aramid fibre and copper. NGage rates it for 15,000 to 25,000 km under normal riding, with thermal resistance to 650°C and a friction coefficient of 0.45 to 0.60. Chosen for controlled feel, low dust and quiet running on the road.

HBS 163, Sintered. A metallic compound fused under heat and pressure, using copper, steel and brass powders with graphite and carbon fibre modifiers. NGage rates it for 12,000 to 18,000 km, with thermal resistance to 1000°C and a friction coefficient of 0.55 to 0.65. Chosen for higher thermal stability and consistent bite under sustained load.

Installation and service

Brake pads are a wearing part. Replace them at the manufacturer's service interval or once pad thickness reaches the wear limit. Standard brake service applies: clean the caliper and pad guides, check disc condition, seat the pads correctly, torque the hardware to specification and bed the pads in before hard use.

Professional installation is recommended for anyone not familiar with motorcycle brake service.

Specifications

• Brand: NGage

• Product type: Motorcycle brake pads

• Position: Rear

• Pad codes: HB 163 (Whisker Ceramic), HBS 163 (Sintered)

• Sold as: one axle set

Please confirm your pad code against the NGage chart or your existing pads before ordering. We are happy to help with fitment guidance.