BMW

The Storm Exhaust for BMW R 1300 GS (2025) is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the BMW R 1300 GS (2025).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the BMW R 1300 GS (2025). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for BMW R 1250 GS Adventure is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the BMW R 1250 GS Adventure.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the BMW R 1250 GS Adventure. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

HB 163 / HBS 163 Rear Brake Pads, Whisker Ceramic & Sintered (Rear Only) The NGage HB 163 and HBS 163 are disc brake pads for motorcycles whose rear brake caliper specifies this exact pad shape. They are direct-replacement components and do not alter caliper geometry, disc size, or braking system architecture. Per the official NGage brake pad compatibility chart, the following motorcycles use this pad code at the rear: Suzuki Gixxer 250 Suzuki V-Strom 250 SX Honda CBR 250R (non-ABS) Honda CBR 250R (ABS, Nissin calipers) Triumph Street Triple 675 Triumph Street Triple 675 R Ducati Monster 797 Ducati Scrambler Jawa 42 Jawa Classic Yezdi Roadster Yezdi Adventure BMW G 310 R BMW G 310 GS BMW S1000R (2014-2024) Note. Royal Enfield, KTM, Bajaj, Triumph 400 and Ather riders are served by their own HB 163 listings on this store. Pad code and fitment logic A pad code defines the physical shape and mounting interface of the pad. Only pads carrying the matching code belong in a given caliper. HB 163 is the Whisker Ceramic compound. HBS 163 is the Sintered compound. Both share identical dimensions, backing plate profile and mounting points. Only the friction material differs. Fitting a pad of a different shape can cause improper seating, uneven wear, noise, reduced braking efficiency or damage to the brake system. Choosing between the two compounds HB 163, Whisker Ceramic. A ceramic friction compound reinforced with whisker filament, blended with ceramic, mineral and aramid fibre and copper. NGage rates it for 15,000 to 25,000 km under normal riding, with thermal resistance to 650°C and a friction coefficient of 0.45 to 0.60. Chosen for controlled feel, low dust and quiet running on the road. HBS 163, Sintered. A metallic compound fused under heat and pressure, using copper, steel and brass powders with graphite and carbon fibre modifiers. NGage rates it for 12,000 to 18,000 km, with thermal resistance to 1000°C and a friction coefficient of 0.55 to 0.65. Chosen for higher thermal stability and consistent bite under sustained load. Installation and service Brake pads are a wearing part. Replace them at the manufacturer's service interval or once pad thickness reaches the wear limit. Standard brake service applies: clean the caliper and pad guides, check disc condition, seat the pads correctly, torque the hardware to specification and bed the pads in before hard use. Professional installation is recommended for anyone not familiar with motorcycle brake service. Specifications Brand: NGage Product type: Motorcycle brake pads Position: Rear Pad codes: HB 163 (Whisker Ceramic), HBS 163 (Sintered) Sold as: one axle set Please confirm your pad code against the NGage chart or your existing pads before ordering. We are happy to help with fitment guidance.

Read more less

HB 164 / HBS 164 Rear Brake Pads, Whisker Ceramic & Sintered (Rear Only) The NGage HB 164 and HBS 164 are disc brake pads for motorcycles whose rear brake caliper specifies this exact pad shape. They are direct-replacement components and do not alter caliper geometry, disc size, or braking system architecture. Per the official NGage brake pad compatibility chart, the following motorcycles use this pad code at the rear: BMW S1000XR (2018 onwards) BMW R1000 GS Ducati Multistrada 1200 (2015-2018) Note. Pad code 164 is a front pad on several other motorcycles. This listing is the rear position only; check your own chart entry before ordering. Pad code and fitment logic A pad code defines the physical shape and mounting interface of the pad. Only pads carrying the matching code belong in a given caliper. HB 164 is the Whisker Ceramic compound. HBS 164 is the Sintered compound. Both share identical dimensions, backing plate profile and mounting points. Only the friction material differs. Fitting a pad of a different shape can cause improper seating, uneven wear, noise, reduced braking efficiency or damage to the brake system. Choosing between the two compounds HB 164, Whisker Ceramic. A ceramic friction compound reinforced with whisker filament, blended with ceramic, mineral and aramid fibre and copper. NGage rates it for 15,000 to 25,000 km under normal riding, with thermal resistance to 650°C and a friction coefficient of 0.45 to 0.60. Chosen for controlled feel, low dust and quiet running on the road. HBS 164, Sintered. A metallic compound fused under heat and pressure, using copper, steel and brass powders with graphite and carbon fibre modifiers. NGage rates it for 12,000 to 18,000 km, with thermal resistance to 1000°C and a friction coefficient of 0.55 to 0.65. Chosen for higher thermal stability and consistent bite under sustained load. Installation and service Brake pads are a wearing part. Replace them at the manufacturer's service interval or once pad thickness reaches the wear limit. Standard brake service applies: clean the caliper and pad guides, check disc condition, seat the pads correctly, torque the hardware to specification and bed the pads in before hard use. Professional installation is recommended for anyone not familiar with motorcycle brake service. Specifications Brand: NGage Product type: Motorcycle brake pads Position: Rear Pad codes: HB 164 (Whisker Ceramic), HBS 164 (Sintered) Sold as: one axle set Please confirm your pad code against the NGage chart or your existing pads before ordering. We are happy to help with fitment guidance.

Read more less

NGK Laser Iridium. The plug NGK specifies for the BMW 320i, 740i and 740Li. The fine-wire iridium centre electrode fires a sharper, more focused spark than a conventional plug, giving a smoother idle, cleaner combustion and better cold starts, with a long service life. Direct fit. Nothing to adjust. Find your car BMW · 320i · 740i · 740Li BMW used four, six and eight cylinder engines under these names depending on generation, so cylinder count varies. Send us your registration year and engine code and we will confirm the count before you order. Specifications Part number · IZFR6H11 Type · Laser Iridium Heat range · 6 Sold as · pack of 4 or pack of 6 Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your model and year and we will confirm before you order.

Read more less

Pagid T1366N is a rear-axle brake pad set for the BMW 5 SERIES E60 (2003- 2010), using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the BMW 5 SERIES E60 (2003- 2010). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

Pagid T1819N is a rear-axle brake pad set for the BMW 5 SERIES G30 530D / 530I MSPORT, using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the BMW 5 SERIES G30 530D / 530I MSPORT. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

Icer 182002 is a front-axle brake pad set for the BMW 5 SERIES F10 (2009 - present) 520D / 525D & i, using the Icer compound, a Spanish-made pad from Europe's largest independent friction manufacturer and an OE supplier to European carmakers.Icer characteristics Manufacturer Icer Brakes, Spain, founded 1961 OE status Tier 1 and Tier 2 supplier to European carmakers Intended use Everyday road driving Approval ECE R90 compliant Quality system AENOR certified Fitment guidanceListed against the BMW 5 SERIES F10 (2009 - present) 520D / 525D & i. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by Icer.

Read more less

Brembo P06041 is a front-axle brake pad set from Brembo's Prime range for the BMW 3 SERIES E90 320d (2005 - 2010) / 3 SERIES E90 320i, measuring 165 mm wide, 74 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 165 mm Height 74 mm Thickness 17 mm Braking system Brembo WVA number 24316 FMSI D1371 8483 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584059890 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the BMW 3 SERIES E90 320d (2005 - 2010) / 3 SERIES E90 320i. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

EBC DP4690R is a front-axle brake pad set for the BMW, using the EBC Yellowstuff compound, a fast-street pad with high friction from cold, built on an aramid-fibre compound.EBC Yellowstuff characteristics Compound Aramid fibre, copper-free since 2021 Intended use Fast street driving Cold friction High bite from cold, no warm-up needed Green fade threshold 400 °C (750 °F), per EBC Dust Not a low-dust pad Bedding in Beds naturally over the first 100-200 miles of urban use Approval ECE R90 approved for street use Fitment guidanceListed against the BMW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Brembo P06042 is a front-axle brake pad set from Brembo's Prime range for the BMW X3 E83 (2004 - 2010), measuring 155 - 156 mm wide, 64 mm tall and 20 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 155 - 156 mm Height 64 mm Thickness 20 mm Braking system Teves WVA number 21676,23474 FMSI D946 7592 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584059906 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the BMW X3 E83 (2004 - 2010). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

BrakeKraft BK34216882246 is a rear-axle brake disc for the BMW 3 SERIES G20 330i / 5 Series G30 520D, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW 3 SERIES G20 330i / 5 Series G30 520D. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

BrakeKraft BK34216882245 is a rear-axle brake disc for the BMW 3 SERIES G20 330i / 5 Series G30 520D, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW 3 SERIES G20 330i / 5 Series G30 520D. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

Pagid T3141N is a front-axle brake pad set for the BMW 1 Series F20 / F21, using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the BMW 1 Series F20 / F21. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

BrakeKraft BK34216860925 is a rear-axle brake disc for the BMW 5 SERIES G30 530D / 530I MSPORT, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW 5 SERIES G30 530D / 530I MSPORT. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

Pagid T1960N is a front-axle brake pad set for the BMW 6 SERIES F13 / 730Ld (F01, using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the BMW 6 SERIES F13 / 730Ld (F01. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

Icer 181687 is a rear-axle brake pad set for the BMW 7 Series E65 (2001-2009) / 730Ld, using the Icer compound, a Spanish-made pad from Europe's largest independent friction manufacturer and an OE supplier to European carmakers.Icer characteristics Manufacturer Icer Brakes, Spain, founded 1961 OE status Tier 1 and Tier 2 supplier to European carmakers Intended use Everyday road driving Approval ECE R90 compliant Quality system AENOR certified Fitment guidanceListed against the BMW 7 Series E65 (2001-2009) / 730Ld. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Icer.

Read more less

BrakeKraft BK34212284811 is a rear-axle brake disc for the BMW M2 / M3, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW M2 / M3. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

BrakeKraft BK34212284812 is a rear-axle brake disc for the BMW M2 / M3, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW M2 / M3. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

Pagid 55836NHC is a front-axle brake disc for the BMW X1 U11, from the Pagid OEM range, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the BMW X1 U11. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by Pagid.

Read more less

BrakeKraft BK34116860912 is a front-axle brake disc for the BMW 5 SERIES G30 530D / 530I MSPORT, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW 5 SERIES G30 530D / 530I MSPORT. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

Icer 182193 is a rear-axle brake pad set for the BMW X1 (2016 onwards), using the Icer compound, a Spanish-made pad from Europe's largest independent friction manufacturer and an OE supplier to European carmakers.Icer characteristics Manufacturer Icer Brakes, Spain, founded 1961 OE status Tier 1 and Tier 2 supplier to European carmakers Intended use Everyday road driving Approval ECE R90 compliant Quality system AENOR certified Fitment guidanceListed against the BMW X1 (2016 onwards). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Icer.

Read more less

BrakeKraft BK34116860911 is a front-axle brake disc for the BMW 5 SERIES G30 530D / 530I MSPORT, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW 5 SERIES G30 530D / 530I MSPORT. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less

BrakeKraft BK34217991104 is a rear-axle brake disc for the BMW M5 F90 / M8, from the BrakeKraft Drilled & Slotted range, a cross-drilled and slotted performance disc.BrakeKraft Drilled & Slotted characteristics Surface Cross-drilled and slotted Intended use Performance road driving Purpose of drilling Vents gas and heat away from the pad face Purpose of slotting Clears dust and debris, keeps the pad surface biting cleanly Fitment guidanceListed against the BMW M5 F90 / M8. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Compound characteristics as published by BrakeKraft.

Read more less