Royal Enfield Meteor 350 Accessories

NGage DH7RTII-8 Double Iridium Spark Plug for Royal Enfield J-Series 350 (BS4 & BS6) Engineered for the Royal Enfield J-Series 350 Platform The NGage DH7RTII-8 Double Iridium Spark Plug is specified for Royal Enfield motorcycles built on the J-Series 350 engine platform. This platform introduced a revised engine architecture featuring updated combustion chamber geometry, fuel injection systems, and refined ignition requirements compared to earlier Royal Enfield engine generations. The DH7RTII-8 is listed by NGage as a direct replacement spark plug for J-Series 350 motorcycles, covering both BS4 and BS6 compliant models within this platform. It is engineered to align with the ignition characteristics and operational requirements defined for these engines. This spark plug is not intended for older UCE engines or non, J-Series Royal Enfield platforms. Understanding the J-Series 350 Platform Royal Enfield’s J-Series 350 engine underpins multiple current-generation motorcycles sharing a common engine and ignition system architecture. The platform includes: Revised cylinder head designUpdated combustion chamber characteristicsFuel-injected system configurationBS4 and BS6 production variants Because these motorcycles share common ignition specifications, NGage lists the DH7RTII-8 as a unified replacement option for the J-Series family. Correct platform identification is essential. Spark plug mismatch can affect ignition stability, combustion efficiency, and long-term engine reliability. This listing applies strictly to the J-Series 350 motorcycles specified in the compatibility section below. Double Iridium Construction The DH7RTII-8 belongs to NGage’s Double Iridium spark plug lineup. “Double Iridium” refers to the use of iridium material on both the center electrode and the ground electrode. Iridium is widely used in modern spark plug design due to its: High melting pointResistance to electrode wearAbility to maintain structural integrity under repeated ignition cycles By applying iridium on both electrodes, the design aims to support consistent spark generation across regular operating conditions. Double iridium construction is commonly used in engines requiring stable ignition performance over extended service intervals. NGage does not publish specific electrode dimensions, preset gap values, or manufacturer-defined service intervals for this part number, and no additional performance claims are implied. This spark plug is positioned strictly as a premium replacement component within its specified application. BS4 and BS6 Compatibility According to NGage product material, the DH7RTII-8 spark plug is compatible with both BS4 and BS6 compliant Royal Enfield J-Series motorcycles. This ensures coverage across production years spanning the emission transition period, provided the motorcycle belongs to the J-Series 350 platform. No claims are made regarding emission reduction benefits, fuel economy improvement, horsepower gains, or performance tuning enhancements. The DH7RTII-8 is intended strictly as a replacement spark plug that aligns with manufacturer-specified ignition requirements. Manufacturing Origin The NGage DH7RTII-8 spark plug is manufactured in Japan, as stated by NGage. No additional manufacturing process details, certifications, or performance endorsements are published by the manufacturer beyond this information. Country of origin is specified strictly for product identification purposes. Intended Use The DH7RTII-8 spark plug is intended for routine replacement during scheduled maintenance intervals as recommended by Royal Enfield. It is suitable for: Daily commutingHighway ridingGeneral road useScheduled spark plug service This spark plug is not marketed as a racing component, track-only ignition system, or specialized tuning upgrade. Correct installation and torque specification should always follow the Royal Enfield service manual guidelines. Fitment Accuracy & Platform Restriction Spark plug selection must match engine platform requirements precisely. The DH7RTII-8 is intended exclusively for Royal Enfield J-Series 350 motorcycles listed below. It should not be installed on: Older UCE 350 enginesRoyal Enfield 500 cc enginesOther Royal Enfield platforms not listed Incorrect spark plug installation may affect ignition performance and engine operation. Compatibility, Royal Enfield J-Series 350 Compatible with: Royal Enfield Classic 350 (Reborn)Royal Enfield Bullet 350 (Reborn)Royal Enfield Meteor 350Royal Enfield Hunter 350 Compatibility applies strictly to J-Series 350 models. Variant Clarification This listing includes: NGage DH7RTII-8 Double Iridium Spark Plug only “Double Iridium” refers specifically to iridium usage on both the center and ground electrodes. No alternate heat ranges, configurations, or material variants are included in this listing. Product Specifications Brand: NGagePart Number: DH7RTII-8Spark Plug Type: Double IridiumVehicle Compatibility: BS4 & BS6 J-Series 350Country of Manufacture: JapanApplication: Motorcycle spark plug Installation & Usage Notes Install only on Royal Enfield J-Series 350 motorcycles listed aboveFollow Royal Enfield service manual torque specificationsInstall on a cold engineFollow standard spark plug installation procedures Professional installation is recommended if unsure about torque settings or spark plug replacement procedures. Summary The NGage DH7RTII-8 Double Iridium Spark Plug is a platform-specific replacement component engineered for Royal Enfield J-Series 350 motorcycles. Manufactured in Japan and designed with double iridium electrode construction, it aligns with the ignition requirements of BS4 and BS6 compliant J-Series engines. It is intended for routine maintenance replacement, maintaining ignition consistency within manufacturer-specified parameters. Platform-specific fitment. Double iridium construction. J-Series ignition compatibility. Terminal Type This plug is supplied with a bare threaded terminal stud. That is how it leaves the factory, and no terminal nut is fitted. A plug cap that screws onto the thread fits as supplied. If your cap seats on a terminal nut instead, a standard screw-on spark plug terminal nut can be fitted to the stud. Part Number NGage catalogue this plug as DH7RTII-8. The individual retail box is printed DH7RTII-8S. Both markings are the same spark plug. The outer carton and the NGage Master Catalogue use DH7RTII-8, and the single-plug box carries the S. If your box reads DH7RTII-8S, you have the correct part.

Read more less

N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 (Classic 350 / Meteor 350 / Hunter 350) The N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 is a performance-oriented replacement air filter crafted specifically for Royal Enfield motorcycles built on the J-platform. This includes popular models like the Classic 350, Meteor 350, and Hunter 350. Designed as a direct stock replacement, it boosts airflow efficiency while maintaining dependable filtration for everyday riding conditions. This Royal Enfield air filter ensures your engine breathes freely without compromising protection. Modern BS6 motorcycles depend on a precise air, fuel balance to offer smooth throttle response, consistent combustion, and long-term engine stability. The air filter plays a crucial role in this system, controlling both the volume and cleanliness of intake air entering the engine. The N-Gage Hyper Flow Air Filter improves intake airflow compared to standard disposable paper filters, while protecting the engine from dust, debris, and moisture. This is especially important for Indian riding environments where conditions can be harsh and unpredictable. Royal Enfield Air Filter with High-Flow Cotton Gauze Construction This Royal Enfield air filter is built using premium organic cotton gauze, layered and specially treated to allow greater airflow without sacrificing filtration performance. Unlike conventional paper filters, which restrict airflow over time as they collect dirt, cotton gauze filters maintain more consistent airflow when cleaned. Proper maintenance ensures longevity and consistent engine protection. The filter arrives factory pre-oiled, which helps trap fine dust particles effectively while still allowing increased air volume. This balance between airflow and filtration is essential for stable engine performance in all riding conditions, from stop-and-go city traffic to extended highway cruises. Designed Specifically for Royal Enfield J-Platform 350cc Engines The N-Gage Hyper Flow Air Filter fits precisely within the stock airbox of Royal Enfield’s J-platform 350cc engines. It installs as a direct replacement with no cutting, drilling, trimming, or modification needed. This makes upgrading your motorcycle’s filter simple and hassle-free. This air filter matches factory dimensions and mounting points, integrating seamlessly with the original intake system. This means riders can improve airflow without changing the motorcycle’s stock intake layout, sealing, or weather protection. These features enhance the bike’s reliability during daily use in varying conditions. Throttle Response and Ride Feel with the N-Gage Royal Enfield Air Filter Improved airflow contributes to smoother throttle response and more consistent power delivery across all rpm ranges. Many riders choose high-flow air filters to reduce intake restriction and help the engine breathe freer during acceleration and steady cruising. This Royal Enfield air filter is designed for riders seeking enhanced ride feel without complex modifications. According to manufacturer specifications, this air filter offers performance gains of up to 0.5 BHP under optimal conditions. However, real-world results may vary based on factors like riding style, maintenance habits, fuel quality, and overall engine condition. The filter works perfectly with the stock ECU and exhaust system and requires no ECU remapping or tuning adjustments. Reusable and Long-Term Ownership Benefits Unlike disposable paper filters that need frequent replacement, this N-Gage air filter is washable and reusable. Regular cleaning and re-oiling using appropriate maintenance products allow multiple reuses across the filter’s lifespan. This makes it an eco-friendly and cost-effective solution for riders. Choosing this filter supports long-term ownership goals, reducing consumable waste and maintaining consistent performance over time. Regular maintenance is vital to ensure continuous filtration efficiency and engine protection, especially in dusty or high-usage scenarios commonly faced by riders. Built for Real-World Indian Riding Conditions with the Royal Enfield Air Filter Indian roads often present challenges such as high dust levels, humidity, heavy monsoon rain, and temperature swings. The N-Gage Hyper Flow Air Filter is engineered to deliver consistent filtration across dust and rain conditions, making it ideal for daily commutes, highway tours, and mixed-use riding. This filter is compatible with BS6, Euro 4, and Euro 5 compliant models, meeting current emission norms while focusing equally on airflow efficiency and intake cleanliness. These attributes ensure your motorcycle maintains top performance while adhering to environmental regulations. Installation and Maintenance Guidance Installation of the filter follows the exact procedure as replacing a standard stock air filter and requires no special tools or technical know-how. Riders should follow recommended service intervals for inspection, cleaning, and re-oiling to maintain optimal performance and filtration consistency throughout the filter’s lifespan.

Read more less

Control Your Exhaust. On Your Terms. Your valved exhaust has two modes, you just haven't been able to use both. The Valvetronic Exhaust Valve Control Module (Manual) gives you a handlebar-mounted switch that physically opens or closes the exhaust butterfly valve whenever you want. Full roar on the open highway. Clean and quiet through the colony, toll booth, or early morning streets. No apps. No wiring. No compromise. This is the most reliable way to control a valved exhaust, because there's nothing electronic to fail. A cable connects your thumb to the valve. That's it. What This Module Does Valved exhausts come with an internal butterfly valve that changes how exhaust gases flow. When the valve is closed, gases pass through a baffled internal route, quieter, more refined. When the valve is open, gases take the free-flow path, louder, rawer, with a more aggressive exhaust note. Most valved exhausts ship without any control module. The valve stays fixed in one position. This module gives you a switch to change it, whenever you want, from the handlebar. Closed valve: Quiet, compliant, neighbour-friendly. Use it in residential areas, at idle, in traffic, on early morning rides. Open valve: The sound your exhaust was built to make. Use it on highways, open roads, or anywhere you want the full character of your exhaust to come through. Why Manual Over Electric Zero electronics. No solenoid, no servo, no wiring loom, no relay. Nothing to short, corrode, or fail over time. Works anywhere, always. The valve opens when you pull the cable. No power required. No sensor needed. Doesn't care if your bike is warm, cold, or idling. You're in control. The valve is exactly where you put it, open or closed, until you choose to change it. No automatic switching when you don't want it. Simple to install. Route the cable, connect to the valve actuator, mount the switch. No ECU tapping, no wiring diagrams, no calibration. Built to last. A cable and a switch outlast any electronic actuator on a motorcycle. Less to maintain, less to replace. How It Works A control switch mounts on your handlebar. A cable runs from the switch down to the butterfly valve actuator on your exhaust. When you flick the switch, cable tension physically rotates the valve between open and closed. The entire system is mechanical, no power draw from your bike's electrical system, no ECU communication, no mapping required. Installation requires routing the cable cleanly along the frame to the exhaust, connecting to the existing valve actuator arm, and adjusting cable tension for full travel in both directions. A standard workshop should be able to install this in under an hour on most platforms. Compatible Bikes This is a universal module: it works with any valved exhaust system that supports mechanical cable actuation, regardless of bike brand or model. Below is a verified compatibility reference across popular Indian market platforms. If your bike has a valved slip-on, this module can control it. Royal Enfield Interceptor 650 / Continental GT 650 / Classic 650 / Bear 650 Classic 350 (Reborn) / Hunter 350 / Meteor 350 Himalayan 411 / Himalayan 450 / Guerrilla 450 Scram 411 / Super Meteor 650 / Shotgun 650 KTM Duke 125 / Duke 200 / Duke 250 / Duke 390 RC 125 / RC 200 / RC 390 Adventure 250 / Adventure 390 / Adventure 390 (2025) 790 Adventure Triumph Speed 400 / Scrambler 400 X / Tiger 400 Street Triple 675 / Speed T4 Bonneville T100 / T120 / Street Twin Tiger 800 / Street Scrambler 900 Yamaha MT-15 V2 / R15 V3 / R15 V4 FZ25 / FZS25 / Fazer 25 MT-03 / R3 YZF-R1 / YZF-R6 / MT-07 Kawasaki Ninja 400 / Ninja 650 / Ninja 1000 SX Z800 / Z900 / Z900 (2026) Versys 650 / Versys-X 300 / Versys 1000 Honda CB200X / CB350 Highness / CB350RS CBR 250R / CB300R / CB300F CBR 650R / CBR 650F / CB Hornet 160R Africa Twin / NX200 Bajaj Pulsar NS200 / RS200 / AS200 / 220F Dominar 250 / Dominar 400 NS 400Z TVS Apache RR 310 / Apache RTR 200 4V Ronin BMW G 310 R / G 310 GS / G 310 RR S 1000 R / S 1000 XR / R 1000 GS Suzuki Gixxer 250 / V-Strom 250SX / V-Strom 650 GSX-R750 / GSX-S750 / GSX-R1000 Hayabusa (2021 Onwards) Ducati Scrambler 800 / Scrambler 1100 Monster 797 / Monster 1200 Hypermotard 939 / Multistrada 950 Streetfighter V4 Harley Davidson Street 750 / Street Rod X440 / X440T Forty Eight / Iron 883 Jawa / Yezdi Jawa 42 FJ / Jawa Perak Yezdi Adventure / Yezdi Roadster Hero Karizma XMR / Xpulse 200 4V / Xpulse 210 Benelli TRK 502 / TRK 502X / TNT 600i / TNT 899 This module is universal, it controls the valve mechanism, not the exhaust itself. Your exhaust must have a butterfly valve with a mechanical actuator arm. Confirm exhaust compatibility before ordering. If your bike model isn't listed but runs a valved slip-on, this module will work. What's in the Box 1 × Valvetronic Manual Control Switch (handlebar mount) 1 × Control cable assembly Mounting hardware Exhaust system not included. Module requires a compatible valved exhaust to function. Specifications Control Type: Manual (mechanical cable) Actuation: Direct cable-pull butterfly valve operation Power Required: None ECU / Wiring Integration: Not required Valve Positions: Open / Closed (user-operated) Mount: Handlebar switch with cable routing Fitment: Universal, compatible with mechanically-actuated valved exhausts Brand: Valvetronic MRP: ₹3,499 Also Available Want automatic valve switching based on RPM and throttle input? The Valvetronic Electric (Automatic) Module does exactly that, the valve opens and closes on its own as you ride. View the Electric Module →

Read more less

Your Exhaust. Intelligent. Automatic. The Valvetronic Electric (Automatic) Exhaust Valve Control Module brings smart valve control to your valved exhaust. The butterfly valve opens and closes automatically, no switches to flip, no cables to pull. It reads riding input and actuates the valve on its own, giving you the quiet mode when you need it and the full exhaust character when you're pushing hard. This is the premium way to run a valved exhaust. Set it and forget it. The system handles the rest. What This Module Does Valved exhausts have an internal butterfly valve that controls exhaust gas routing. Valve closed = exhaust gases take a baffled internal path, quieter, more refined note. Valve open = free-flow path, the full aggressive exhaust character your slip-on was built for. The Electric Module automates this. A solenoid or servo actuator connects to the butterfly valve. The control unit reads signals from your bike, RPM, throttle position, or a dedicated switch, and commands the valve to open or close accordingly. You get intelligent mode switching without any manual input mid-ride. Low RPM / idle / city: Valve stays closed. Quiet, controlled, compliant. Use it on early morning starts, residential areas, toll plazas, traffic jams. Higher RPM / open throttle / highway: Valve opens automatically. The exhaust opens up, the note deepens, and you get the full sound profile of your slip-on exhaust. Why Electric Over Manual Fully automatic operation. The valve transitions without any rider input. Focus on riding, the module handles valve control in the background. Seamless transitions. No fumbling with a switch mid-corner or on a highway run. The valve opens and closes at the right moment, every time. Consistent behaviour. Same switching point every ride. No forgetting to open the valve before a run or close it before entering the city. Optional override. Most configurations allow a dedicated switch for manual override if you want direct control in specific situations. Premium install. Cleaner setup than a cable system, no handlebar clutter, no cable routing along the frame. How It Works The control unit connects to your bike's wiring, typically tapping into the ignition circuit, RPM signal, or a dedicated output. When the defined threshold is crossed (RPM, throttle position, or switch activation), the unit sends a signal to an electric actuator mounted on the exhaust valve. The actuator rotates the butterfly valve between open and closed positions in milliseconds. The system draws minimal current from the battery and does not require ECU remapping, fuel map changes, or custom tuning. Installation involves wiring the control unit to the correct signal source and mounting the actuator to the exhaust valve arm. A professional auto electrician or experienced mechanic can complete the installation cleanly on most bikes in 1-2 hours. Compatible Bikes This is a universal module: it works with any valved exhaust system that supports electric or solenoid actuation, regardless of bike brand or model. Below is a verified compatibility reference across popular Indian market platforms. If your bike has a valved slip-on, this module can control it. Royal Enfield Interceptor 650 / Continental GT 650 / Classic 650 / Bear 650 Classic 350 (Reborn) / Hunter 350 / Meteor 350 Himalayan 411 / Himalayan 450 / Guerrilla 450 Scram 411 / Super Meteor 650 / Shotgun 650 KTM Duke 125 / Duke 200 / Duke 250 / Duke 390 RC 125 / RC 200 / RC 390 Adventure 250 / Adventure 390 / Adventure 390 (2025) 790 Adventure Triumph Speed 400 / Scrambler 400 X / Tiger 400 Street Triple 675 / Speed T4 Bonneville T100 / T120 / Street Twin Tiger 800 / Street Scrambler 900 Yamaha MT-15 V2 / R15 V3 / R15 V4 FZ25 / FZS25 / Fazer 25 MT-03 / R3 YZF-R1 / YZF-R6 / MT-07 Kawasaki Ninja 400 / Ninja 650 / Ninja 1000 SX Z800 / Z900 / Z900 (2026) Versys 650 / Versys-X 300 / Versys 1000 Honda CB200X / CB350 Highness / CB350RS CBR 250R / CB300R / CB300F CBR 650R / CBR 650F / CB Hornet 160R Africa Twin / NX200 Bajaj Pulsar NS200 / RS200 / AS200 / 220F Dominar 250 / Dominar 400 NS 400Z TVS Apache RR 310 / Apache RTR 200 4V Ronin BMW G 310 R / G 310 GS / G 310 RR S 1000 R / S 1000 XR / R 1000 GS Suzuki Gixxer 250 / V-Strom 250SX / V-Strom 650 GSX-R750 / GSX-S750 / GSX-R1000 Hayabusa (2021 Onwards) Ducati Scrambler 800 / Scrambler 1100 Monster 797 / Monster 1200 Hypermotard 939 / Multistrada 950 Streetfighter V4 Harley Davidson Street 750 / Street Rod X440 / X440T Forty Eight / Iron 883 Jawa / Yezdi Jawa 42 FJ / Jawa Perak Yezdi Adventure / Yezdi Roadster Hero Karizma XMR / Xpulse 200 4V / Xpulse 210 Benelli TRK 502 / TRK 502X / TNT 600i / TNT 899 This module is universal, it controls the valve mechanism, not the exhaust itself. Your exhaust must have a butterfly valve with an actuator arm compatible with electric operation. Confirm exhaust compatibility before ordering. If your bike model isn't listed but runs a valved slip-on, this module will work. What's in the Box 1 × Valvetronic Electric Control Unit 1 × Electric actuator assembly Wiring harness and connectors Mounting hardware Exhaust system not included. Module requires a compatible valved exhaust to function. Specifications Control Type: Automatic (electric / solenoid-actuated) Actuation: Electric servo / solenoid butterfly valve operation Power Required: 12V DC (motorcycle battery) ECU Integration: Signal tap, no remapping required Valve Positions: Open / Closed (auto-switching) Override: Manual switch override supported Mount: Control unit + actuator on exhaust valve arm Fitment: Universal, compatible with electrically-actuated valved exhausts Brand: Valvetronic MRP: ₹6,499 Manual vs Electric, Which One to Choose Feature Manual (₹3,499) Electric / Auto (₹6,499) Valve Control Rider-operated switch Automatic (RPM/throttle-based) Power Required None 12V (bike battery) Wiring Not required Signal tap required Install Complexity Simple Moderate Failure Points Minimal (cable only) Electronic components Best For Riders who want full manual control Riders who want a set-and-forget system Also Available Prefer a simpler, zero-electronics setup? The Valvetronic Manual Module gives you direct cable-pull control from your handlebar, no wiring, no power required. View the Manual Module →

Read more less

FuelX Pro+ Advanced Smart Autotune Module for Royal Enfield | 10 Dynamic Maps | Handlebar Switch | Plug & Play Maximize your Royal Enfield’s performance with precision.The FuelX Pro+ Advanced Smart Autotune Module is a plug-and-play fueling solution engineered specifically for Royal Enfield motorcycles. It is designed for riders who want smoother throttle response, refined power delivery, and real-time fueling optimization, without flashing the ECU or visiting a dyno. Unlike static fuel controllers, FuelX Pro+ continuously reads engine data and automatically adjusts the air-fuel ratio while you ride. The result is cleaner acceleration, reduced jerks at low RPM, and improved ride smoothness across city traffic, highways, and mountain roads. Advanced Autotune Control, 10 Dynamic Maps FuelX Pro+ features 10 Dynamic Autotune Maps, allowing riders to select their preferred fueling character. Each map offers a different response profile, ranging from smooth touring behavior to sharper throttle engagement. The included Handlebar Map Switch lets you change maps on the go. No laptop. No external device. No workshop visit. Simply select your map and feel the difference instantly. This flexibility makes FuelX Pro+ suitable for riders who commute daily, tour long distances, or ride aggressively on open highways. Real-Time Adaptive Fueling Technology At the core of the FuelX Pro+ system is its Auto Adapt technology. The module continuously analyzes engine operating parameters and automatically adjusts fueling in real time. This helps compensate for: • Altitude variations• Temperature changes• Aftermarket exhaust upgrades• Free-flow air filters• Riding load differences Instead of running too lean or inconsistent, your motorcycle maintains a stable and optimized air-fuel ratio. This results in smoother engine behavior, cooler running temperatures, and improved throttle refinement. Improved Ride Feel & Throttle Response FuelX Pro+ is engineered to enhance everyday ride quality. Riders typically experience: • Sharper throttle precision• Reduced engine hesitation• Smoother low-RPM tractability• Cleaner roll-on acceleration The manufacturer states up to 25% improved throttle precision and significantly enhanced acceleration response. These gains focus on real-world rideability rather than peak dyno numbers. This module is not marketed as a race ECU replacement. It is a smart adaptive fueling system built for usable performance. Plug-and-Play Installation Installation is fully non-intrusive and reversible. The module connects directly to the stock wiring harness using OEM-style connectors. There is no wire cutting, no ECU rewriting, and no permanent modification required. Install the unit, mount the switch, select your map, and ride. Professional installation is recommended if you are unfamiliar with motorcycle electrical systems, but experienced riders can complete installation with standard tools. Durable Automotive-Grade Construction FuelX Pro+ is built using automotive-grade electronic components. The compact control unit is weather-resistant, vibration-resistant, and heat-resistant. The harness features protective braided sleeving, ensuring durability under long touring conditions and harsh weather exposure. Designed for real riding conditions, not just showroom specs. Compatibility, Royal Enfield Motorcycles FuelX Pro+ is compatible with a wide range of Royal Enfield motorcycles. Fitment varies by model and generation. Common compatible platforms include: • Himalayan 450 • Guerrilla 450• Classic 350 /500• Meteor 350 / Hunter 350 / Bullet 350• Interceptor 650• Continental GT 650• Bear 650• Super Meteor 650• Himalayan 411  Always select your exact motorcycle model and year before purchase to ensure proper fitment. Who Is This For? FuelX Pro+ is ideal for riders who: • Want smoother throttle control• Have installed a free-flow exhaust or air filter• Ride in varying altitudes• Experience lean fueling hesitation• Prefer adaptive performance without ECU flashing It is not a racing ECU or ignition timing modifier. It is an intelligent fueling optimizer built for street and touring motorcycles. What’s Included • FuelX Pro+ Smart Autotune Module• Handlebar Map Switch• Model-specific plug-and-play harness• Manufacturer documentation Only components listed above are included. Specifications Brand: FuelXModel: Pro+Type: Advanced Smart Autotune ModuleMaps: 10 Dynamic Autotune MapsSwitch: Handlebar Map Switch IncludedInstallation: Plug-and-PlayConstruction: Weather & Heat ResistantWarranty: 2-Year Manufacturer Warranty

Read more less

Which Classic 350 do you have? This kit is for the new Classic 350 (2021 onwards), Hunter 350 and Meteor 350. For the old UCE Classic 350 with a rear drum brake (up to 2020), choose the Rolon kit for the old Classic 350 (UCE, drum brake). Rolon Brass Chain & Sprocket Kit for Royal Enfield Meteor 350, Hunter 350 & Classic 350 Reborn (J-Platform) The Rolon Brass Chain & Sprocket Kit is a matched final-drive replacement set developed specifically for Royal Enfield J-platform 350 motorcycles. This includes: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Series) These motorcycles share a common J-platform drivetrain architecture. This kit is engineered to align with that platform’s original equipment geometry, maintaining correct pitch, sprocket tooth profile, chain alignment, and drivetrain load distribution. This is a direct-replacement drivetrain kit. It is not a universal chain kit and must not be installed on non, J-platform Royal Enfield motorcycles. Platform-Specific Fitment, J-Series Only Royal Enfield’s J-platform introduced a revised engine and drivetrain configuration compared to older UCE-era motorcycles. Differences include sprocket alignment, carrier geometry, and drivetrain layout. This Rolon kit is designed strictly for J-platform 350cc motorcycles. Compatible Models: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Platform) Not Compatible With: Classic 350 (UCE platform, drum or disc variants)Bullet 350 UCERoyal Enfield 500 modelsHimalayan 411 / 450Any non, J-platform Royal Enfield motorcycles This kit is designed only for Royal Enfield J-platform 350 motorcycles. It must not be installed on UCE-era Classic or Bullet models. Correct platform identification is critical. Chain pitch and sprocket alignment differ across generations. Chain Construction, Brass-Coated Steel The drive chain supplied in this kit features steel construction with a brass surface coating. The brass coating serves multiple functions: Improved resistance to surface oxidationReduced susceptibility to moisture-related corrosionEnhanced surface durability compared to untreated steel chainsSupport for smoother long-term operation under similar riding conditions The chain maintains OEM-spec pitch and roller dimensions for J-platform drivetrains. Correct pitch alignment is essential for maintaining smooth sprocket engagement and minimizing premature wear. The brass coating does not alter drivetrain geometry. It serves as a protective surface treatment over the steel structure. Front & Rear Sprocket Construction The front and rear sprockets included in this kit are manufactured from hardened steel and cut to match OEM mounting geometry used on J-platform motorcycles. Sprocket accuracy directly influences: Chain engagement consistencyLoad distribution across teethDrivetrain smoothnessWear uniformity Incorrect tooth profile or pitch mismatch can accelerate chain wear and produce uneven drivetrain behaviour. This Rolon kit maintains OEM-spec tooth count and geometry for J-platform alignment. Both sprockets are designed to integrate directly with factory mounting points and carriers used on Meteor 350, Hunter 350, and Classic 350 (Reborn). Why Replace as a Matched Set Chain and sprockets wear together as a system. Installing a new chain on worn sprockets, or vice versa, can accelerate uneven wear and reduce service life. This kit is supplied as a matched drivetrain set to maintain: Uniform wear patternsProper chain tension behaviourBalanced load distributionConsistent final-drive performance Replacing all three components together supports drivetrain longevity and stable power transfer. Kit Contents 1 × Rolon Brass-Coated Drive Chain1 × Front Sprocket1 × Rear Sprocket Supplied as a matched final-drive set. Construction & Material Overview Chain: Steel constructionBrass surface coatingOEM-spec pitch and roller dimensions Sprockets: Hardened steel constructionOEM-spec tooth profileDesigned for J-platform sprocket carriers Verified Specifications Brand: RolonProduct Type: Motorcycle chain & sprocket kitApplication: Final drive replacementChain Type: Brass-coated steel chainPlatform Compatibility: Royal Enfield J-platform 350ccPosition: Front + Rear drivetrainVehicle Compatibility: Meteor 350, Hunter 350, Classic 350 (Reborn) Installation & Usage Notes Install only on Royal Enfield J-platform 350 motorcyclesAlways replace chain and sprockets together as a matched setEnsure correct chain slack adjustment after installationVerify rear wheel alignmentLubricate chain after installation and at regular service intervalsProfessional installation recommended Incorrect chain tension or misalignment may affect drivetrain longevity. Summary The Rolon Brass Chain & Sprocket Kit is a platform-specific final-drive replacement set engineered for Royal Enfield J-platform 350 motorcycles including the Meteor 350, Hunter 350, and Classic 350 (Reborn). With a brass-coated steel chain and hardened OEM-spec sprockets, the kit maintains correct pitch alignment, tooth engagement, and drivetrain load distribution defined for the J-series platform. Strictly for J-platform models.Matched set replacement.Correct geometry. Reliable final drive. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

Read more less

Sprint Filter CM231P14 Air Filter for Royal Enfield J-series 350 The J-series 350 is the most common motorcycle in this catalogue and the one that sees the most dust. The Sprint Filter CM231P14 covers the whole platform. It drops straight into the factory airbox and replaces the paper element for good. A dry filter, not an oiled one Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it. Sprint Filter's P14 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine. The numbers Sprint publishes Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective: Filtration: traps debris down to 14 microns Airflow: 1,800 litres per square metre per second Media: dry non-woven filtering media Servicing: dry, compressed air only Which Sprint grade is right for you Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave: P08: 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces. P14 (this filter): 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use. T12: 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions. Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike. Built to outlast the service schedule Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the CM231P14 is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably. The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size. Fitment guidance Sprint catalogue the CM231P14 for: Royal Enfield Classic 350 (2022 onwards) Royal Enfield Meteor 350 (2021 onwards) Royal Enfield Hunter 350 (2022 onwards) Royal Enfield Bullet 350 (2023 onwards) Royal Enfield Goan Classic 350 (2025 onwards) It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order. Technical specifications Brand: Sprint Filter Part number: CM231P14 Media grade: P14 Material: dry non-woven filtering media Filtration: down to 14 microns Airflow: 1,800 l/m²/sec Servicing: dry, clean with compressed air, no oiling Country of manufacture: Italy

Read more less

NGage HB 163 / HBS 163 Rear Brake Pads for Royal Enfield Models, Ceramic & Sintered Options (Rear Only) The NGage HB 163 and HBS 163 rear brake pads are disc brake pads developed for select Royal Enfield motorcycles where this exact pad shape and specification is required for the rear brake caliper position. These brake pads are listed by NGage for use on multiple Royal Enfield models that share a common rear brake pad format across the UCE, J-platform, 450cc, and 650cc families. As per the official NGage brake pad compatibility chart, the following motorcycles use pad code HB 163 (Whisker Ceramic) or HBS 163 (Sintered) at the rear: Royal Enfield Thunderbird 350 (UCE) Royal Enfield Thunderbird 500 (UCE) Royal Enfield Classic 350 (UCE) Royal Enfield Classic 500 (UCE) Royal Enfield Electra 350 (UCE) Royal Enfield Electra 500 (UCE) Royal Enfield Meteor 350 Royal Enfield Hunter 350 Royal Enfield Classic 350 Reborn Royal Enfield Himalayan 411 Royal Enfield Himalayan 450 Royal Enfield Guerrilla 450 Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 This listing covers the rear brake pad set only for the above motorcycles. Brake pads are a critical safety component in any motorcycle braking system. Their role is to generate friction against the brake disc when hydraulic pressure is applied through the brake caliper. Correct brake pad selection depends on the physical pad shape, backing plate profile, mounting geometry, and friction material specification defined for a given brake caliper design. The NGage HB 163 and HBS 163 pads are manufactured to match the mounting dimensions and backing plate geometry specified for the rear brake calipers used on the listed Royal Enfield models. These pads are intended as direct-replacement components and are not designed to alter brake caliper geometry, disc size, or braking system architecture. Pad Code Structure & Fitment Logic Brake pad codes define the physical shape and mounting interface of the brake pad. Only pads with the exact matching code should be used in a given brake caliper. For the motorcycles covered under this listing: HB 163 corresponds to the Whisker Ceramic variant HBS 163 corresponds to the Sintered variant Both variants share the same physical dimensions, backing plate profile, and mounting points. The only difference between the two is the friction material composition. Using the correct pad code is essential. Installing brake pads with a different shape or specification may result in improper seating, uneven wear, brake noise, reduced braking efficiency, or brake system damage. Variant Explanation This product is available in two NGage material variants: HB 163, Whisker Ceramic Brake PadsCeramic-based friction compound reinforced with whisker fibers.Listed by NGage as “HB, Whisker Ceramic Pads.”Designed for controlled braking feel and stable performance under standard road-use conditions. HBS 163, Sintered Brake PadsMetallic sintered friction compound.Listed by NGage as “HBS, Sintered Pads.”Designed for higher thermal stability and consistent braking under sustained load. Both variants are identical in shape, fitment, and mounting dimensions.Only the friction material composition differs. Intended Application & Compatibility Context The NGage HB 163 and HBS 163 rear brake pads are specified only for motorcycles where this exact pad code is listed in official NGage compatibility documentation. This listing applies strictly to the rear brake caliper position on the following motorcycles: Royal Enfield Thunderbird 350 (UCE), Rear Royal Enfield Thunderbird 500 (UCE), Rear Royal Enfield Classic 350 (UCE), Rear Royal Enfield Classic 500 (UCE), Rear Royal Enfield Electra 350 (UCE), Rear Royal Enfield Electra 500 (UCE), Rear Royal Enfield Meteor 350, Rear Royal Enfield Hunter 350, Rear Royal Enfield Classic 350 Reborn, Rear Royal Enfield Himalayan 411, Rear Royal Enfield Himalayan 450, Rear Royal Enfield Guerrilla 450, Rear Royal Enfield Interceptor 650, Rear Royal Enfield Continental GT 650, Rear Compatibility applies only when HB 163 or HBS 163 is the recommended rear brake pad specification. Motorcycles using a different pad code should not use this model, even if engine displacement or platform appears similar. Installation & Service Considerations Brake pads are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals or when pad thickness reaches the wear limit. Installation should be carried out following standard brake service procedures, including: Cleaning the brake caliper and pad guide surfaces Verifying brake disc condition Correctly seating the pads in the caliper Applying proper tightening torque to mounting hardware Performing a bed-in procedure after installation Improper installation may affect braking performance or cause premature wear. Professional installation is recommended for riders who are not familiar with motorcycle brake system service procedures. Summary The NGage HB 163 and HBS 163 rear brake pads are direct-replacement brake pads designed for select Royal Enfield motorcycles where this exact pad shape and specification is required. Available in Whisker Ceramic and Sintered variants, these pads provide two friction material options while maintaining identical fitment geometry. Correct specification matching and proper installation are essential prior to use. Compatibility (Rear Only) As per NGage’s official compatibility chart: Royal Enfield Thunderbird 350 (UCE) Royal Enfield Thunderbird 500 (UCE) Royal Enfield Classic 350 (UCE) Royal Enfield Classic 500 (UCE) Royal Enfield Electra 350 (UCE) Royal Enfield Electra 500 (UCE) Royal Enfield Meteor 350 Royal Enfield Hunter 350 Royal Enfield Classic 350 Reborn Royal Enfield Himalayan 411 Royal Enfield Himalayan 450 Royal Enfield Guerrilla 450 Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 Variant Explanation Whisker Ceramic (HB 163): Ceramic-based friction compound Sintered (HBS 163): Metallic sintered friction compound Both variants share identical fitment and mounting dimensions Specifications  Brand: NGage Product Type: Motorcycle brake pads Position: Rear Pad Codes: HB 163 (Whisker Ceramic), HBS 163 (Sintered) Compatibility: Royal Enfield models listed above Certification Marking: ARAI Tested  Manufacturing Origin: Japan  Installation / Usage Notes Install only in the rear brake caliper position Use only the specified pad code for your motorcycle Perform bed-in procedure after installation Professional installation recommended

Read more less

Why Choose the Legundary Heatshield for Royal Enfield Meteor 350? The Legundary Meteor / Reborn Heatshield (Matt Black) is designed specifically for the Royal Enfield Meteor 350 (including Reborn variant), providing a protective shield over the exhaust bend pipe while enhancing the motorcycle’s visual appeal. This product is engineered for the Meteor 350 platform and is not listed as universal fitment. Model-Specific Compatibility, Royal Enfield Meteor 350 Designed for Royal Enfield Meteor 350 Compatible with Meteor / Reborn models (as mentioned) Direct mounting over exhaust bend pipe Intended to align with factory exhaust layout Compatibility beyond Meteor 350 models is not stated and should not be assumed. Material & Construction Constructed from Mild Steel Matt black finish Designed for durability and corrosion resistance Vent slots provided for airflow Material thickness is not specified in the official listing. Functional Purpose The heatshield is intended to: Act as a protective cover over the exhaust bend pipe Provide a visual upgrade to the exhaust section Help reduce direct heat exposure contact Important Note (as stated):Direct contact with the bend pipe is not recommended even with the heatshield installed. Scope clarification:This product acts as a protective shield and aesthetic enhancement. It does not eliminate exhaust heat. Design Features Matt black finish Vent openings for heat ventilation Curved design following the exhaust pipe profile Designed to provide a premium visual upgrade Warranty 6 Months Warranty (as mentioned)Note: Rawtorque does not provide any separate warranty other than the manufacturer warranty. For complete warranty terms, claim procedures, and policy details, please refer to our Warranty Policy page. Installation Designed for direct installation Professional installation recommended for proper alignment and fastening Product Specifications Brand: Legundary Product Name: Meteor / Reborn Heatshield Motorcycle Compatibility: Royal Enfield Meteor 350 Material: Mild Steel Finish: Matt Black Warranty: 6 Months

Read more less

Quick answerThe NGage RHINOX is a handmade stainless steel 304 slip-on exhaust for the Royal Enfield Meteor 350 and Classic 350 Reborn. NGage rates it at up to +1.8 bhp and +2.4 Nm on the wheels, 3.2 kg lighter than the stock silencer, with a removable dB killer. Fits Royal Enfield Meteor 350 Royal Enfield Classic 350 (Reborn) NGage also makes the NEXUS, specified for BS6 Phase 2 Classic 350, Meteor 350 and Goan Classic 350. Not sure which suits your bike? Send us your model and registration year before ordering. What NGage claims Power: up to +1.8 bhp on wheels Torque: up to +2.4 Nm on wheels Weight: 3.2 kg lighter than stock Sound: 72.1 dB at 1500 rpm and 82.2 dB at 2000 rpm, tested to SAE J2825 No drop in mileage Removable dB killer Lifetime warranty, as printed by NGage NGage describes the RHINOX as using Turbulent Flow Technology to maintain back pressure, arrest sparks and balance negative pressure. BuildEvery NGage Powerflow exhaust is handmade in India from stainless steel 304, the grade chosen for corrosion resistance under heat and road grime. Available finish: Chrome or Black Textured. Specifications Brand: NGage Powerparts Model: RHINOX Powerflow Exhaust Type: Slip-on muffler Material: Stainless steel 304, handmade Finish: Chrome / Black Textured Fitment: Meteor 350, Classic 350 (Reborn) dB killer: Removable Made in India Before you buyA slip-on changes your bike's sound level. Check your local rules on aftermarket exhausts before riding on public roads, and keep the dB killer fitted for street use. Professional fitment is recommended.

Read more less

Quick answerThe NGage NEXUS is a handmade stainless steel 304 slip-on exhaust for BS6 Phase 2 Royal Enfield Classic 350, Meteor 350 and Goan Classic 350. NGage rates it at up to +1.0 bhp and +1.8 Nm on the wheels, 2.5 kg lighter than the stock silencer, with a removable dB killer. Fits Royal Enfield Classic 350 Reborn (BS6 Phase 2) Royal Enfield Meteor 350 (BS6 Phase 2) Royal Enfield Goan Classic 350 For the Meteor 350 and Classic 350 Reborn, NGage also makes the RHINOX. Not sure which suits your bike? Send us your model and registration year before ordering. What NGage claims Power: up to +1.0 bhp on wheels Torque: up to +1.8 Nm on wheels Weight: 2.5 kg lighter than stock Sound: 80 dB at 1500 rpm and 84 dB at 2000 rpm, tested to SAE J2825 No drop in mileage Removable dB killer Lifetime warranty, as printed by NGage BuildEvery NGage Powerflow exhaust is handmade in India from stainless steel 304, the grade chosen for corrosion resistance under heat and road grime. Available finish: Black Textured or Chrome. Specifications Brand: NGage Powerparts Model: NEXUS Powerflow Exhaust Type: Slip-on muffler Material: Stainless steel 304, handmade Finish: Black Textured / Chrome Fitment: Classic 350 Reborn (BS6 Phase 2), Meteor 350 (BS6 Phase 2), Goan Classic 350 dB killer: Removable Made in India Before you buyA slip-on changes your bike's sound level. Check your local rules on aftermarket exhausts before riding on public roads, and keep the dB killer fitted for street use. Professional fitment is recommended.

Read more less

Quick answer: DP Brakes DP 617 / SDP 617 is the genuine front or rear brake pad for the Royal Enfield Goan Classic 350, Classic 350/500, Hunter 350, Meteor 350, Super Meteor 650, Classic 650 and more. Choose DP Standard sintered (₹3,499) for everyday street and touring use, or SDP Pro-MX (₹3,899) for stronger bite under hard use. Available on pre-order: we source it from DP's official India importer after you order and confirm the dispatch date with you.Which bikes does DP 617 fit? Royal Enfield: Classic 350/500 (front); Classic 650 (rear); Electra 350 (front); Goan Classic 350 (front); Himalayan 411 (front); Hunter 350 (front); Meteor 350 (front); Scram 411 (front); Shotgun 650 (2024 onwards) (rear); Super Meteor 650 (2024 onwards) (rear); Thunderbird 350/500 (front) KTM: EXC 450 (front); SX 250 (2003-2024) (front) Bajaj: Dominar 400 (up to 2018) (front); NS 200 (front); Pulsar 150/180/220 (front); RS 200 (front) Yamaha: FZ 16 (front); FZ 25 (front); Fazer 25 (front); MT15 (front); R15 V3 (front); R15 V4 (front) Kawasaki: KX 450 4T Brembo (2024) (front) Jawa: 42 (front); 42 Bobber (front); Classic (front); FJ (front); Perak (front) Ather: 450X (front) Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 617 – DP Standard SDP 617 – SDP Pro-MX MRP ₹3,499 ₹3,899 Compound Standard sintered, premium OEM-style replacement DP's premium SDP sintered compound from the Pro-MX range, for stronger bite and consistency under hard use Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

Read more less

Quick answer: DP Brakes DP 622 / SDP 622 is the genuine rear brake pad for the Royal Enfield Goan Classic 350, Classic 350/500, Hunter 350, Meteor 350, Himalayan 450, Guerrilla 450 and more. Choose DP Standard sintered (₹3,499) for everyday street and touring use, or SDP Pro-MX (₹3,899) for stronger bite under hard use. In stock at Rawtorque and dispatched within 1–2 business days, shipped across India.Which bikes does DP 622 fit? Royal Enfield: Bear 650; Classic 350/500; Continental GT 650; Electra 350; Goan Classic 350; Guerrilla 450; Himalayan 411; Himalayan 450; Hunter 350; Interceptor 650; Meteor 350; Scram 411; Shotgun 650 (up to 2024); Super Meteor 650 (up to 2024); Thunderbird 350/500 KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (2025); Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025); Dominar 400 (up to 2018); NS 200; Pulsar 150/180/220; RS 200 Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards); Street Triple 675 (2013-2017); Street Triple 675R (2013-2017); Street Triple 765RS (2021-2022); Tiger 1200 Rally GT (2022 onwards); Tiger 1200 Rally Pro (2022 onwards); Tiger 850 (2020 onwards); Tiger 900 (2020-2023); Tiger 900 (2024 onwards) TVS: RR310 Suzuki: Gixxer 150; Gixxer 250; V-Strom 250 SX BMW: F 650 GS (2008-2012); F 750 GS (2018-2023); F 850 GS (2018-2020); F 850 GS (2021-2023); F 850 GSA (2019-2020); F 850 GSA (2021-2023); F 900 GS (2024 onwards); F 900 RC (2020-2023); F 900 XR (2020-2023); F 900GSA (2024 onwards); G 310 R & G 310 GS; S 1000R Sport Brembo (2014-2020); S 1000RR (2010-2018); S 1000RR (2019-2022); S 1000RR Nissin Caliper (2019-2021) Jawa: 42; 42 Bobber; Classic; FJ; Perak Aprilia: RS 457 (2024) Ducati: Monster 797 (2017-2019); Scrambler 1100 (2018-2020); Scrambler 1100 (2021 onwards); Scrambler 1100 Sport (2018-2020); Scrambler 800 (2015-2018); Scrambler 800/ICON/DARK (2019-2022); Scrambler Desert Sled (2017-2023); Scrambler Icon 800 (2023 onwards) Ather: 450X The Continental GT 650 uses the same brake hardware as the Interceptor 650, so this pad fits both.Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 622 – DP Standard SDP 622 – SDP Pro-MX MRP ₹3,499 ₹3,899 Compound Standard sintered, premium OEM-style replacement DP's premium SDP sintered compound from the Pro-MX range, for stronger bite and consistency under hard use Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

Read more less

The Red Rooster Header Pipe for the Meteor 350 is the front half of the system. A silencer changes how the exhaust leaves the bike. The header changes how it leaves the cylinder, and the two were meant to work together. It is a mandrel-bent stainless steel single piece with a wider bore than the stock item. Less restriction ahead of the silencer lets the engine breathe more freely under load, which shows up as a cleaner pickup through the mid range and a fuller note low down. Paired with a Red Rooster silencer such as the Polestar Pro it completes the system rather than a slip-on. Finish is preference alone. Polish and Black share the same bore, bends and mounting, so the choice changes the look and nothing else. Light blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the Royal Enfield Meteor 350. If you are pairing it with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so there is no cutting or welding. We still suggest a workshop fit, mainly to get alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster header pipe in the finish you select Mounting hardware

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Royal Enfield Motorcycles Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for Royal Enfield motorcycles using the SD-953 rear brake pad shape. Manufactured by Vesrah in Japan, these pads use a ceramic composite compound engineered for stable braking performance and reduced brake dust. The Vesrah SD-953 rear brake pads are built as a direct replacement pad set compatible with several Royal Enfield motorcycles including the Himalayan, Meteor 350, Hunter 350, and Interceptor 650. The ceramic compound construction is designed to deliver smooth braking feel, consistent stopping performance, and reliable everyday street braking. Ceramic brake pad materials are known for producing lower brake dust and controlled braking response compared to many traditional compounds. The pad surface interacts with the brake rotor to maintain predictable braking behaviour while minimizing unnecessary rotor wear. Designed for daily riding conditions, the Vesrah SD-953 rear ceramic brake pads provide a dependable replacement option for riders looking to maintain proper braking performance on their Royal Enfield motorcycle. Compatible Motorcycles (Rear Brake) Royal Enfield ThunderBird 350Royal Enfield ThunderBird 500Royal Enfield Interceptor 650Royal Enfield HimalayanRoyal Enfield Classic 350Royal Enfield Classic 500Royal Enfield Electra 350Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Himalayan 450Royal Enfield Shotgun 650 Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-947 Front Ceramic Brake Pads for Royal Enfield Motorcycles Product Description The Vesrah SD-947 Front Ceramic Brake Pads are designed for Royal Enfield motorcycles that use the SD-947 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver smooth braking response and consistent stopping performance. The Vesrah SD-947 front brake pads are built as a direct replacement pad set compatible with Royal Enfield motorcycles including the Himalayan, Meteor 350, Hunter 350 and Classic 350. The ceramic compound construction is designed to provide controlled braking feel, stable stopping power, and dependable performance for everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking performance across regular riding conditions. The pad compound interacts with the brake rotor to provide reliable braking while minimizing unnecessary rotor wear. For riders replacing worn front brake pads on their Royal Enfield motorcycle, the Vesrah SD-947 ceramic front brake pads provide a direct-fit replacement suitable for daily riding and touring. Compatible Motorcycles (Front Brake) Royal Enfield Thunderbird 350Royal Enfield Thunderbird 500Royal Enfield Interceptor 650Royal Enfield HimalayanRoyal Enfield Classic 350Royal Enfield Classic 500Royal Enfield Electra 350Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Himalayan 450Royal Enfield Shotgun 650 Specifications Brand: VesrahPad Code: SD-947Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Classic meets custom. A thump amplifier. The Silver Stallion SPORTY+ is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. Crisp throttle and strong low-end power. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY+ Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY+ fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Plug and play fitment. The Silver Stallion GOAN is a slip-on exhaust for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.7 BHP and +3 Nm over the stock system while weighing 2.5 kg. No mid-pipe required. A cafe racer silhouette with a coastal tune. What changes on the bike +1.7 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion GOAN Type Slip-On Exhaust Fits Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series) Power gain +1.7 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Goan Classic 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion GOAN fit?It is made for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.7 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Goan Classic 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Performance balance. The Silver Stallion SPORTY is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 2.5 kg. Excellent power delivery and throttle response, especially at lower RPM. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Precision Ignition Upgrade for the Royal Enfield J-Platform 350 The NGage High Performance Spark Plug Kit is engineered to improve ignition efficiency on the Royal Enfield J-series 350 engine. This is not just a plug replacement, it is a complete ignition upgrade designed for smoother, cleaner and more responsive performance. Improved Combustion Efficiency Combining an NGage Double Iridium spark plug with an ultra low-resistance racing cable and a resistor spark cap, the kit delivers: Better spark consistency Cleaner, more complete combustion Reduced misfires Smoother, More Responsive Engine Improved throttle response Better acceleration feel More stable idle Reliable in All Conditions Easier cold starts Reliable ignition in wet weather Consistent performance in daily and touring use Built for Street & Performance Use Compatible with stock and modified setups Suitable for both BS4 and BS6 motorcycles Limited warranty, designed for a service life up to 1,00,000 km Fitment This kit is designed for the following Royal Enfield J-platform 350 models: Meteor 350 Reborn Classic 350 Hunter 350 Bullet 350 (Reborn) Goan Classic 350 WHAT'S INCLUDED NGage Double Iridium Spark Plug (DH7RTII-8, printed DH7RTII-8S on the retail box, made in Japan): 1 No NGage Resistor Spark Cap (CB05F-R, 5kΩ): 1 No NGage Racing Spark Plug Cable, ultra low resistance: 1 No

Read more less

Enhance the sound, styling, and riding experience of your Royal Enfield Classic Reborn 350 or Meteor 350 with the Powerage Slip-On Exhaust system engineered for improved exhaust flow, reduced weight, and deeper exhaust acoustics. Manufactured using premium stainless steel construction and dyno-tested for balanced real-world performance, the Powerage exhaust system delivers a stronger exhaust note, improved throttle feel, and cleaner premium aesthetics while maintaining everyday usability. Its internally engineered baffle core provides optimized back pressure and exhaust efficiency, helping preserve smooth rideability while unlocking a richer and deeper exhaust character. The exhaust includes a detachable dB reducer, allowing riders to switch between a refined touring sound and a more aggressive performance tone. This listing includes multiple finish variants under one product listing: Brushed Steel Finish Polish Finish Black Finish All variants are specifically developed for direct fitment on Royal Enfield Classic Reborn 350 and Meteor 350 motorcycles. Available Finish Variants Brushed Steel Finish Industrial-inspired satin stainless finish with strong resistance to visible scratches and heat marks. Polish Finish Mirror-like polished stainless steel appearance designed for retro premium styling enthusiasts. Black Finish Aggressive matte black styling with heat-resistant coating and stealth-inspired appearance. Key Features Compatible with Royal Enfield Classic Reborn 350 Compatible with Royal Enfield Meteor 350 Stainless steel construction Deep resonant exhaust note Detachable dB reducer included Dyno-tested setup Hand-crafted construction Improved exhaust flow efficiency Enhanced throttle response Synthetic wool acoustic insulation Optimized baffle core design OE-inspired styling and fitment Bolt-on installation Performance Benefits Better throttle response Reduced exhaust restriction Improved riding feel Deeper bass-heavy exhaust note Lightweight compared to stock exhaust Enhanced road presence Improved aesthetics Better corrosion resistance compared to stock systems Construction & Design The Powerage slip-on exhaust uses premium stainless steel internals combined with carefully tuned acoustic insulation and a precision-designed baffle core to achieve balanced performance and refined exhaust acoustics. Its slim OE-inspired body profile integrates seamlessly with the retro styling of the Classic Reborn and Meteor 350 while offering a noticeable upgrade in appearance and sound. The removable dB reducer allows riders to tune the exhaust sound according to riding preference. Package Contents 1 x Powerage Slip-On Exhaust Detachable dB Reducer Mounting Hardware Clamps & Fasteners Important Note Please select the correct finish variant before placing your order. Compatible only with Royal Enfield Classic Reborn 350 and Meteor 350. Professional installation recommended. Exhaust sound may vary depending on dB reducer installation and riding conditions.

Read more less

The Legundary Stainless Steel Heatshield is a model-specific exhaust accessory developed for the Royal Enfield Meteor 350, designed to cover the bend pipe section of the exhaust system. It is built for riders who want to reduce heat exposure from the exhaust area while giving the pipe section a cleaner, more finished appearance. Constructed from stainless steel with a polished finish, the heatshield forms a protective outer layer over the exhaust bend pipe. The direct-fit design is developed around the Meteor 350 exhaust layout, requiring no modification for installation. This product carries a 6-month manufacturer warranty provided by Legundary. Rawtorque does not provide additional warranty coverage beyond the manufacturer's policy. Check fitment for your vehicle before purchase. KEY FEATURES Stainless steel construction forms a durable protective layer over the exhaust bend pipe, reducing radiated heat exposure in the pipe area. Polished stainless steel finish gives the exhaust section a clean metallic appearance, a visible upgrade over an unshielded pipe. Direct-fit design developed specifically for the Royal Enfield Meteor 350 exhaust layout, no cutting or modification required. 6-month manufacturer warranty from Legundary included with purchase. SPECIFICATIONSBrand: LegundaryProduct Type: Exhaust HeatshieldMaterial: Stainless SteelFinish: Polished Stainless SteelFitment: Royal Enfield Meteor 350Installation: Direct fitWarranty: 6 Months Manufacturer Warranty

Read more less

The PowerTRONIC V4 Performance ECU is an advanced plug-and-play piggyback engine control module designed specifically for Royal Enfield motorcycles. It is engineered for riders who want sharper throttle response, improved torque delivery, smoother acceleration, and refined fueling control, without permanently modifying the stock ECU. Unlike generic tuning devices, the PowerTRONIC V4 ECU works by intelligently adjusting fueling and ignition parameters in real time. It connects directly to your motorcycle’s stock wiring harness, allowing seamless integration without cutting wires or flashing the factory ECU. This means performance gains remain reversible while maintaining factory reliability standards. Advanced Fueling & Ignition Control The PowerTRONIC V4 Performance ECU for Royal Enfield continuously monitors engine inputs and optimizes the air-fuel ratio for improved combustion efficiency. By refining fueling delivery and ignition timing, the module enhances throttle crispness and mid-range pull, two areas where most riders immediately notice improvement. This results in: • Smoother acceleration across RPM range• Reduced throttle lag• Improved ride refinement in traffic and touring conditions• Stronger roll-on performance during overtakes Because Royal Enfield engines respond well to optimized fueling, the V4 ECU delivers noticeable improvements without compromising long-term durability. Dual Pre-Tuned Maps & Adaptive Capability The PowerTRONIC V4 ECU comes with dual pre-configured performance maps developed specifically for Royal Enfield platforms. Riders can switch between maps depending on riding conditions or modifications such as aftermarket exhaust systems. The module also supports advanced tuning access through compatible software. This allows experienced users to fine-tune fueling parameters for specific setups, altitudes, or riding styles. For most users, however, the pre-loaded maps deliver significant improvement right out of the box. True Plug & Play Installation Installation is completely plug-and-play. The PowerTRONIC V4 Performance ECU connects to the stock harness using model-specific connectors. No ECU flashing, no soldering, and no dyno session is mandatory for baseline operation. Once installed: • The module automatically begins adaptive fueling• Factory ECU remains untouched• No permanent changes are made to the motorcycle This makes the V4 a practical upgrade for riders who want performance without invasive modification. Built for Real-World Riding Constructed using automotive-grade electronics, the PowerTRONIC V4 ECU is heat-resistant, vibration-resistant, and weather-protected for Indian riding conditions. Whether you ride through city congestion, long-distance highways, or varying altitude zones, the system adapts to maintain consistent performance. The result is improved throttle smoothness during daily commuting, stronger mid-range during highway cruising, and enhanced rideability during touring. Performance Without Compromise The goal of the PowerTRONIC V4 Performance ECU for Royal Enfield motorcycles is not extreme racing output. It is controlled, refined, usable performance. Riders typically report: • More responsive throttle feel• Smoother engine character• Cleaner acceleration• Reduced jerkiness at low RPM Because the stock ECU remains active, factory safety parameters continue functioning as intended. Compatibility (Variant Selection Required) The PowerTRONIC V4 ECU is available for the following Royal Enfield models: • Royal Enfield Himalayan 411 EFI (2020-2023)• Royal Enfield Himalayan 450 (2024-2025)• Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Classic 350 (J-Series)• Royal Enfield Meteor 350• Royal Enfield Hunter 350 Select the correct motorcycle variant before purchase to ensure proper fitment. Technical Overview Brand: PowerTRONICProduct Type: Performance Piggyback ECUInstallation Type: Plug & PlayMaps: Dual Pre-Tuned MapsFueling Control: Real-Time Adaptive AdjustmentApplication: Royal Enfield MotorcyclesWarranty: As per official PowerTRONIC manufacturer policy What’s Included • PowerTRONIC V4 Performance ECU Module• Model-Specific Wiring Harness• Mounting Accessories (as provided by manufacturer) No additional hardware is assumed unless shown in product images.

Read more less