Collection

Royal Enfield Bear 650

Race-grade upgrades for every bike & car

27 Products
Genuine partsGenuine performance parts
No cost EMI0% interest, easy instalments
Partial CODAdvance + balance on delivery
Secure checkout100% safe & encrypted
27 products

  • Save - Rs. 1,358.90 Red Rooster Stellar X Performance Exhaust for Royal Enfield Bear 650 Red Rooster Red Rooster Stellar X Performance Exhaust for Royal Enfield Bear 650 Red Rooster

    Red Rooster Red Rooster Stellar X Performance Exhaust for Royal Enfield Bear 650

    20 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    The Red Rooster Stellar X Performance Exhaust is a motorcycle exhaust system developed specifically for the Royal Enfield Bear 650. It is designed for riders looking to upgrade the stock exhaust with a deeper and more engaging exhaust note while retaining controlled sound levels suitable for daily riding and long-distance touring. The Stellar X is positioned as a balanced performance exhaust rather than an extreme loud setup. It focuses on improving the riding experience through sound character, weight reduction, and efficient exhaust flow without compromising usability for regular road use. Design and Construction The Red Rooster Stellar X exhaust is manufactured using SS304 stainless steel, chosen for its strength, corrosion resistance, and thermal stability under sustained riding conditions. Stainless steel construction helps the exhaust withstand heat cycles and environmental exposure over time, making it suitable for both urban riding and extended highway use. The exhaust design prioritizes structural integrity while keeping overall weight lower than the stock exhaust system. Reduced weight contributes to improved handling feel and easier maneuverability, especially during city riding and low-speed conditions. Performance Characteristics The Stellar X exhaust is engineered to support freer engine breathing compared to the stock exhaust. By reducing exhaust restriction, it supports smoother exhaust flow, which can contribute to improved throttle response during acceleration and roll-on riding scenarios. Rather than focusing on maximum loudness, Red Rooster positions the Stellar X as an exhaust that delivers a deeper and more aggressive exhaust tone while maintaining sound levels that remain practical for everyday use. This makes it suitable for riders who want a noticeable sound upgrade without excessive noise fatigue on longer rides. No ECU remapping or engine modifications are stated as required by the manufacturer for installation or operation. Fitment and Installation The Red Rooster Stellar X Performance Exhaust is supplied as a bolt-on replacement for the Royal Enfield Bear 650. It is designed to mount directly onto the motorcycle using existing mounting points, without the need for permanent modifications to the bike. Installation does not require cutting, welding, or alteration of the motorcycle frame. Fitment compatibility is specific to the Bear 650, and proper installation ensures correct alignment and secure mounting. Professional installation is recommended to ensure proper fitment and to avoid exhaust leaks or alignment issues. Riding Usage This exhaust system is suited for: Daily city commuting Highway riding Long-distance touring Its balanced sound profile and stainless steel construction make it suitable for riders who want a functional upgrade that integrates well with regular riding conditions rather than track-only use. Finish Options The Red Rooster Stellar X exhaust is offered in multiple finish options, which can be selected as variants during purchase. Finish availability may vary depending on stock and manufacturer supply. What’s Included 1 x Red Rooster Stellar X Performance Exhaust for Royal Enfield Bear 650 Required mounting components as supplied by the manufacturer Important Notes Designed specifically for Royal Enfield Bear 650 This is a performance exhaust system, not a cosmetic slip-on only No ECU remapping or engine changes are stated as required by the manufacturer Installation quality directly affects performance and sound output Summary The Red Rooster Stellar X Performance Exhaust for Royal Enfield Bear 650 is a well-balanced exhaust upgrade designed for riders who want improved sound character, reduced weight, and practical performance benefits without sacrificing everyday usability. Built using SS304 stainless steel and supplied as a direct bolt-on system, it offers a clean and reliable upgrade path for Bear 650 owners.Usage and Maintenance The Red Rooster Stellar X Performance Exhaust for Royal Enfield Bear 650 is intended for regular road use under normal riding conditions. Periodic inspection of mounting points and fasteners is recommended to ensure secure fitment over time. Exhaust sound and performance characteristics may vary depending on riding style and operating conditions.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 14,947.90 Rs. 13,589.00 ↓ You save Rs. 1,358.90

  • BMC FM01070 air filter (rendered image, shape from BMC's photo of the FM01070) BMC FM01070 fits Royal Enfield: Interceptor 650, Continental GT 650, Bear 650

    BMC BMC Air Filter for Royal Enfield Interceptor 650, Continental GT 650 & Bear 650 - FM01070

    13 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    For the 650 twins, and the Bear. The BMC FM01070 fits Royal Enfield's 648 cc parallel twin in the Interceptor 650, Continental GT 650 and Bear 650. It replaces the paper element in the stock airbox, lets the twin breathe more freely, and is washed and re-oiled rather than replaced. Why it is worth fitting Breathes more freely. Oiled cotton gauze flows more air than a paper element, for a cleaner throttle response. Drops straight in. It sits in the original airbox. No cutting, no remapping, no extra hardware. Lasts the life of the bike. Wash it, re-oil it and refit it, instead of buying a new paper filter at every service. Built by BMC in Italy. Full-moulded in one piece, with no glued joints to work loose. Backed by BMC. Covered by a 2 year BMC limited warranty. Fitment Royal Enfield Interceptor 650, 2019 onwards Continental GT 650, 2019 onwards Bear 650, 2024 onwards Check before you order Classic 650, Shotgun 650 and Super Meteor 650 take the BMC FM01182. Specifications Part number FM01070 Brand BMC Type Shaped element Size 122 x 200 mm Height 105 mm Replaces OEM Royal Enfield 576029/C Filter media Multi-layer oiled cotton gauze Construction Full-moulded, single piece Servicing Pre-oiled, washable and reusable Warranty 2 years, BMC limited warranty Made in Italy CareClean it when the gauze looks dirty, and sooner if you ride in heavy dust. Wash it with BMC detergent, let it dry, re-oil it with BMC regeneration fluid and refit it. Everything you need is in the BMC washing kit. Not sure it fits your bike? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 6,299.00 Rs. 6,289.00 ↓ You save Rs. 10.00

  • Save - Rs. 344.90 PowerTRONIC V4 ECU – Performance Tuning Module for Royal Enfield Motorcycles PowerTRONIC V4 – Performance ECU for Royal Enfield Motorcycles PowerTRONIC

    PowerTRONIC PowerTRONIC V4, Performance ECU for Royal Enfield Motorcycles

    19 reviews

    Interceptor 650 IND (20... +11 more

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    The PowerTRONIC V4 Performance ECU is an advanced plug-and-play piggyback engine control module designed specifically for Royal Enfield motorcycles. It is engineered for riders who want sharper throttle response, improved torque delivery, smoother acceleration, and refined fueling control, without permanently modifying the stock ECU. Unlike generic tuning devices, the PowerTRONIC V4 ECU works by intelligently adjusting fueling and ignition parameters in real time. It connects directly to your motorcycle’s stock wiring harness, allowing seamless integration without cutting wires or flashing the factory ECU. This means performance gains remain reversible while maintaining factory reliability standards. Advanced Fueling & Ignition Control The PowerTRONIC V4 Performance ECU for Royal Enfield continuously monitors engine inputs and optimizes the air-fuel ratio for improved combustion efficiency. By refining fueling delivery and ignition timing, the module enhances throttle crispness and mid-range pull, two areas where most riders immediately notice improvement. This results in: • Smoother acceleration across RPM range• Reduced throttle lag• Improved ride refinement in traffic and touring conditions• Stronger roll-on performance during overtakes Because Royal Enfield engines respond well to optimized fueling, the V4 ECU delivers noticeable improvements without compromising long-term durability. Dual Pre-Tuned Maps & Adaptive Capability The PowerTRONIC V4 ECU comes with dual pre-configured performance maps developed specifically for Royal Enfield platforms. Riders can switch between maps depending on riding conditions or modifications such as aftermarket exhaust systems. The module also supports advanced tuning access through compatible software. This allows experienced users to fine-tune fueling parameters for specific setups, altitudes, or riding styles. For most users, however, the pre-loaded maps deliver significant improvement right out of the box. True Plug & Play Installation Installation is completely plug-and-play. The PowerTRONIC V4 Performance ECU connects to the stock harness using model-specific connectors. No ECU flashing, no soldering, and no dyno session is mandatory for baseline operation. Once installed: • The module automatically begins adaptive fueling• Factory ECU remains untouched• No permanent changes are made to the motorcycle This makes the V4 a practical upgrade for riders who want performance without invasive modification. Built for Real-World Riding Constructed using automotive-grade electronics, the PowerTRONIC V4 ECU is heat-resistant, vibration-resistant, and weather-protected for Indian riding conditions. Whether you ride through city congestion, long-distance highways, or varying altitude zones, the system adapts to maintain consistent performance. The result is improved throttle smoothness during daily commuting, stronger mid-range during highway cruising, and enhanced rideability during touring. Performance Without Compromise The goal of the PowerTRONIC V4 Performance ECU for Royal Enfield motorcycles is not extreme racing output. It is controlled, refined, usable performance. Riders typically report: • More responsive throttle feel• Smoother engine character• Cleaner acceleration• Reduced jerkiness at low RPM Because the stock ECU remains active, factory safety parameters continue functioning as intended. Compatibility (Variant Selection Required) The PowerTRONIC V4 ECU is available for the following Royal Enfield models: • Royal Enfield Himalayan 411 EFI (2020-2023)• Royal Enfield Himalayan 450 (2024-2025)• Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Classic 350 (J-Series)• Royal Enfield Meteor 350• Royal Enfield Hunter 350 Select the correct motorcycle variant before purchase to ensure proper fitment. Technical Overview Brand: PowerTRONICProduct Type: Performance Piggyback ECUInstallation Type: Plug & PlayMaps: Dual Pre-Tuned MapsFueling Control: Real-Time Adaptive AdjustmentApplication: Royal Enfield MotorcyclesWarranty: As per official PowerTRONIC manufacturer policy What’s Included • PowerTRONIC V4 Performance ECU Module• Model-Specific Wiring Harness• Mounting Accessories (as provided by manufacturer) No additional hardware is assumed unless shown in product images.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 19,449.00 - Rs. 25,449.00↓ You save Rs. 344.90

Quick answer: Rawtorque stocks performance parts and accessories for the Royal Enfield Bear 650: Red Rooster, Silver Stallion, Barrel and Powerage exhausts; BMC, Sprint Filter, NGage and Moto Torque air filters; FuelX and PowerTRONIC tuners; DP Brakes and 66BHP brake pads; 66BHP Air Born shock absorbers; and a Legundary crash guard, bash plate and luggage carrier. Each part is listed with Bear 650 fitment, and we deliver across India.

Bear 650 upgrades we stock

  • Exhausts: Red Rooster, Silver Stallion (SSP), Barrel and Powerage exhausts and Valvetronic valve controllers. See Bear 650 exhausts.
  • Air filters and tuning: BMC, Sprint Filter, NGage and Moto Torque filters with FuelX Pro+, FuelX Lite or PowerTRONIC V4. See Bear 650 air and fuel and the Stage 1 kit.
  • Brake pads: DP 623 / SDP 623 for the front and DP 622 / SDP 622 for the rear, and 66BHP Race Pro sintered pads.
  • Suspension: 66BHP Air Born Series shock absorbers for the Bear 650.
  • Protection and luggage: Legundary Thanos crash guard with sliders, Vambrace bash plate and Gopher luggage carrier.
  • Ignition: NGage iridium spark plugs.

Frequently asked questions

What are good first upgrades for a Bear 650?

A crash guard and bash plate for scrambler-style riding, sintered brake pads, and an air filter with a FuelX or PowerTRONIC module.

Which brake pads fit the Bear 650?

DP 623 or SDP 623 fits the front and DP 622 or SDP 622 fits the rear. 66BHP also makes Bear 650 sets. One pack covers one caliper.

Do Interceptor 650 parts fit the Bear 650?

The engine and brake pads are shared, so air filters, spark plugs, FuelX, PowerTRONIC and DP pads carry across. The Bear has its own exhaust, suspension and frame parts, so buy the Bear-specific versions. See the 650 twins shared upgrades page.

Do I need a fuel tuner if I fit an exhaust or air filter on my Bear 650?

It's recommended. A FuelX module adjusts fuelling automatically from the O2 sensor, while PowerTRONIC V4 also controls ignition timing with custom maps. Either keeps the engine running smoothly with the extra airflow.

Do you deliver across India?

Yes. Rawtorque ships from Kerala to anywhere in India.

No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000

Login

Forgot your password?

Don't have an account yet?
Create account