Brakes

Brembo P85121X is a front-axle brake pad set for the Skoda & VW, measuring 131 mm wide and 52 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 131 mm Thickness 18 mm Height 52 mm Braking system TRW WVA number 25681,25682 FMSI D1776 9006 Wear indicator Without Accessories With accessories With brake caliper bolts With anti-squeal shim Axle Front EAN code 8020584121955 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P16013X is a front-axle brake pad set from Brembo's Xtra range for the Maruti/Suzuki Baleno RS, Baleno after 2023 and Fronx, measuring 126 mm wide, 52 mm tall and 17 mm thick.Xtra is Brembo's sport road range. What separates it from the Prime pad that shares the same dimensions and caliper application is the friction surface: drilled rather than plain. Those perforations give the pad edges that grip the disc face, and a route to vent gas, dust and water out of the contact patch. The result is more bite for the same pedal effort, and a pad that holds that response through repeated hard stops rather than going vague on the third or fourth one. It is built for road use with a sportier driving style, not for the track.One thing worth being clear about. Pads change bite, not pedal firmness. If your pedal feels soft or spongy, that is a hydraulic matter rather than a friction one, so the brake fluid, a proper bleed and the condition of the flexible hoses are where to look first. No pad will change how far the pedal travels.Specification Width 126 mm Thickness 17 mm Height 52 mm Braking system Lucas WVA number 24283,24285,24284 FMSI D1454 8948 Wear indicator Acoustic Accessories With anti-squeal shim With accessories Axle Front and rear EAN code 8020584114933 An anti-squeal shim is supplied with the set. A sportier friction surface does tend to leave more dust on the wheel than an OE pad, and the drilled face can be marginally more audible at parking speeds. Both are the ordinary cost of the extra bite.These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Maruti/Suzuki Baleno RS, Baleno after 2023 and Fronx. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P86029 is a rear-axle brake pad set from Brembo's Prime range for the Jaguar, Landrover & Volvo, measuring 122 mm wide, 56 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front and rear Width 122 mm Height 56 mm Thickness 16 mm Braking system Teves WVA number 22141,22142 FMSI D1821 9057 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584087282 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Jaguar, Landrover & Volvo. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P28089 is a rear-axle brake pad set from Brembo's Prime range for the Honda New civic from 2019 onwards, measuring 123 mm wide, 48 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Rear Width 123 mm Height 48 mm Thickness 15 mm Braking system Teves WVA number 22429,22430,22431 FMSI D1878 9106, D1878 9334 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584084281 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Honda New civic from 2019 onwards. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P28039 is a rear-axle brake pad set from Brembo's Prime range for the Honda & Maruti/Suzuki, measuring 89 mm wide, 48 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Rear Width 89 mm Height 48 mm Thickness 15 mm Braking system Nissin WVA number 23736,23653,23652 FMSI D536 7418, D537 7418 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584059753 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Honda & Maruti/Suzuki. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P83170 is a front-axle brake pad set from Brembo's Prime range for the Toyota Innova Crysta, measuring 145 mm wide, 56 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 145 mm Height 56 mm Thickness 16 mm Braking system Advics WVA number 22643 FMSI D2006 9236 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584113073 This set does not have a wear indicator built into the pad. If your Toyota Innova Crysta uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Toyota Innova Crysta. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P79028 is a front-axle brake pad set from Brembo's Prime range for the Maruti/Suzuki & Nissan, measuring 142 mm wide, 59 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 142 mm Height 59 mm Thickness 17 mm Braking system Akebono WVA number 25202 FMSI D1338 8449, D1374 8449 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584104910 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Maruti/Suzuki & Nissan. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P79023 is a front-axle brake pad set from Brembo's Prime range for the Maruti/Suzuki SWIFT all models/Ritz/Astar/NewBaleno/Dezire, measuring 109 mm wide, 45 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 109 mm Height 45 mm Thickness 16 mm Braking system Jiangxi Wa WVA number 25181,23962,23963 FMSI D1614 8827 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584103760 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Maruti/Suzuki SWIFT all models/Ritz/Astar/NewBaleno/Dezire. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P54030 is a front-axle brake pad set from Brembo's Prime range for the Mitsubishi OUTLANDER II (2006 - 2012), Cedia, measuring 145 mm wide, 55 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 145 mm Height 55 mm Thickness 16 mm Braking system Akebono WVA number 23584 FMSI D866 7741 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584054772 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Mitsubishi OUTLANDER II (2006 - 2012), Cedia. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P50180 is a front-axle brake pad set from Brembo's Prime range for the Mercedes C class W206 300, measuring 140 mm wide, 88 mm tall and 18 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 140 mm Height 88 mm Thickness 18 mm Backplate Black, painted Accessories Anti-squeal shim Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584132616 This set does not have a wear indicator built into the pad. If your Mercedes C class W206 300 uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes C class W206 300. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P36031 is a front-axle brake pad set from Brembo's Prime range for the Jaguar F pace, ipace, measuring 180 mm wide, 78 mm tall and 18 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 180 mm Height 78 mm Thickness 18 mm Braking system Teves WVA number 22303,22302 FMSI D1861 9090 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584103678 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Jaguar F pace, ipace. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P28035 is a front-axle brake pad set from Brembo's Prime range for the Honda New civic from 2019 onwards, CRV II and Accord 2003 to 2008, measuring 142 mm wide, 57 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 142 mm Height 57 mm Thickness 17 mm Braking system Akebono WVA number 23869,23870,23868 FMSI D914 7795, D943 7844, D958 7795 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584052693 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Honda New civic from 2019 onwards, CRV II and Accord 2003 to 2008. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P24061 is a front-axle brake pad set from Brembo's Prime range for the Ford ECO SPORT (2013 onwards), measuring 155 - 156 mm wide, 62 mm tall and 18 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 155 - 156 mm Height 62 mm Thickness 18 mm Braking system Teves WVA number 23723,23724 FMSI D1044 7947, D1230 7947, D1563 7947 Backplate Black, painted Accessories Anti-squeal shim, piston clip Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584052334 This set does not have a wear indicator built into the pad. If your Ford ECO SPORT (2013 onwards) uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Ford ECO SPORT (2013 onwards). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo 09E66111 is a front-axle brake disc for the Maruti/Suzuki New Swift/Baleno/Dezire, measuring 231 mm diameter and 17 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 231 mm Thickness 17 mm Minimum thickness 15 mm Height 40 mm Bolt holes 4 Centering bore 60 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584320655 New thickness is 17 mm and the manufacturer's minimum is 15 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Maruti/Suzuki New Swift/Baleno/Dezire. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09A72711 (front, 280 mm diameter) and Brembo 08B36917 (rear, 260 mm diameter) are the OE-specification brake discs for the Renault Fluence/Duster AWD/Duster after 2015.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A72711 Diameter 280 mm Thickness 24 mm Minimum thickness 21.8 mm Height 44 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Units per box 1 EAN code 8020584210390 Rear axle specification, 08B36917 Diameter 260 mm Thickness 8 mm Minimum thickness 7 mm Height 86 mm Bolt holes 5 Centering bore 25 mm Disc type Solid Units per box 1 EAN code 8020584039489 Measure at the thinnest point across the braking surface: front is 24 mm new against a 21.8 mm minimum, rear is 8 mm new against a 7 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Renault Fluence/Duster AWD/Duster after 2015. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

HB 155 / HBS 155 Front Brake Pads, Whisker Ceramic & Sintered (Front Only) The NGage HB 155 and HBS 155 are disc brake pads for motorcycles whose front brake caliper specifies this exact pad shape. They are direct-replacement components and do not alter caliper geometry, disc size, or braking system architecture. Per the official NGage brake pad compatibility chart, the following motorcycles use this pad code at the front: Jawa 42 Jawa Classic Note. Royal Enfield, Bajaj and Yamaha riders are served by their own HB 155 front listings on this store. Pad code and fitment logic A pad code defines the physical shape and mounting interface of the pad. Only pads carrying the matching code belong in a given caliper. HB 155 is the Whisker Ceramic compound. HBS 155 is the Sintered compound. Both share identical dimensions, backing plate profile and mounting points. Only the friction material differs. Fitting a pad of a different shape can cause improper seating, uneven wear, noise, reduced braking efficiency or damage to the brake system. Choosing between the two compounds HB 155, Whisker Ceramic. A ceramic friction compound reinforced with whisker filament, blended with ceramic, mineral and aramid fibre and copper. NGage rates it for 15,000 to 25,000 km under normal riding, with thermal resistance to 650°C and a friction coefficient of 0.45 to 0.60. Chosen for controlled feel, low dust and quiet running on the road. HBS 155, Sintered. A metallic compound fused under heat and pressure, using copper, steel and brass powders with graphite and carbon fibre modifiers. NGage rates it for 12,000 to 18,000 km, with thermal resistance to 1000°C and a friction coefficient of 0.55 to 0.65. Chosen for higher thermal stability and consistent bite under sustained load. Installation and service Brake pads are a wearing part. Replace them at the manufacturer's service interval or once pad thickness reaches the wear limit. Standard brake service applies: clean the caliper and pad guides, check disc condition, seat the pads correctly, torque the hardware to specification and bed the pads in before hard use. Professional installation is recommended for anyone not familiar with motorcycle brake service. Specifications Brand: NGage Product type: Motorcycle brake pads Position: Front Pad codes: HB 155 (Whisker Ceramic), HBS 155 (Sintered) Sold as: one axle set Please confirm your pad code against the NGage chart or your existing pads before ordering. We are happy to help with fitment guidance.

Read more less

Liqui Moly Brake Fluid DOT 4 is a synthetic brake fluid based on glycol ethers, alkyl polyglycols, and glycol ether esters, designed for reliable braking performance in both cars and motorcycles across all operating conditions. It is suited for disc and drum brake systems, hydraulic clutch systems, and ABS-equipped vehicles where a DOT 4 specification fluid is prescribed. The formulation carries a high wet and dry boiling point, maintaining safe braking performance even after moisture absorption over extended use. Built-in corrosion inhibitors protect metallic brake components and reduce oxidation at elevated temperatures, while special moisture scavengers actively resist the formation of vapour bubbles that can compromise pedal feel and stopping power. Manufactured in Germany and approved to FMVSS 116 DOT 3, FMVSS 116 DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, SAE J 1703, and SAE J 1704. KEY FEATURES High wet and dry boiling point ensures consistent brake pedal feel and reliable stopping power even after moisture absorption over time. Corrosion inhibitors protect metallic brake components and reduce oxidation under sustained high-temperature conditions. Moisture scavengers actively resist vapour bubble formation, preventing brake fade caused by fluid aeration. Compatible with disc brakes, drum brakes, hydraulic clutch systems, and ABS brake systems. Broad approval coverage across FMVSS, ISO, and SAE standards, making it suitable for a wide range of vehicles.

Read more less

CRANK1 Carbon performance brake pads for the Royal Enfield Himalayan 450. Choose your fitment (front or rear) above. Carbon-compound friction gives strong, fade-resistant stopping with a progressive feel, HH-rated to match or surpass OEM.Why CarbonHigh-heat stability • Strong, consistent bite • Fade resistance under hard use • Long pad life • Quiet, controlled feelFitment guidancePick the option that matches your model year. If you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Frequently asked questionsWhat is the Carbon compound best for?Carbon offers strong, fade-resistant braking with a progressive feel, a great all-round upgrade for spirited road and touring use.Will these fit my model year?Pick the fitment option that matches your year, or ask us for fitment guidance.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

CRANK1 performance brake pads for the TVS Apache RTR 180, all in one place. Choose your compound (Ceramic) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the TVS Apache RTR 180:RearFront fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my TVS Apache RTR 180?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

CRANK1 performance brake pads for the Honda NX200, all in one place. Choose your compound (Ceramic) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the Honda NX200: Front Rear Front + Rear Front fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my Honda NX200?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

CRANK1 performance brake pads for the Honda Hornet 2.0, all in one place. Choose your compound (Ceramic) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the Honda Hornet 2.0: Front Rear Front + Rear Front fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my Honda Hornet 2.0?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less

CRANK1 performance brake pads for the Kawasaki Z900, all in one place. Choose your compound (Ceramic or Sintered) and fitment (front or rear) from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.Ceramic vs Sintered, which should you pick?   Ceramic Sintered Best for Street & touring Aggressive / track / loaded Initial bite Smooth, progressive Strong, immediate High-heat stability Excellent Outstanding Brake dust Low Moderate Noise Quiet Slightly firmer feel Rotor wear Gentle on discs Higher Wet performance Strong Strong A Carbon compound for the Z900 is coming soon and will appear here as a third option.Fitment guidance Z900 (2017-2025): front (twin-disc, supplied as a 2-caliper set) and rear. Z900 (2026 onwards): rear fitment differs, select the 2026+ rear. Choose the option that matches your model year. If you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsCeramic or sintered for my Z900?For everyday street and touring, Ceramic gives smooth, quiet, low-dust braking that is easy on rotors. For hard riding, track days or loaded touring, Sintered delivers stronger high-heat bite.Why is the front sold as a 2-set?The Z900 runs twin front discs, so the front fitment includes pads for both calipers.Will these fit my year?Select 2017-2025 or 2026+ to match your model. Ask us for fitment guidance if you are unsure.Are they genuine CRANK1?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Bed in with progressive braking over the first 150-200 km, avoiding hard stops from high speed until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

Read more less