Sprint Filter PM200P14 Air Filter for KTM Duke 125, 200, 250, 390, RC 390 & Husqvarna (2017 to 2023)

Sprint Filter PM200P14 Air Filter for KTM Duke / RC and Husqvarna, previous generation

The previous-generation KTM singles are still everywhere on Indian roads, and most are on their third or fourth paper filter. The Sprint Filter PM200P14 is the last one you buy. It drops straight into the factory airbox and replaces the paper element for good.

A dry filter, not an oiled one

Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it.

Sprint Filter's P14 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine.

The numbers Sprint publishes

Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective:

• Filtration: traps debris down to 14 microns
• Airflow: 1,800 litres per square metre per second
• Media: dry non-woven filtering media
• Servicing: dry, compressed air only

Which Sprint grade is right for you

Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave:

• P08 — 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces.
• P14 (this filter) — 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use.
• T12 — 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions.

Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike.

Built to outlast the service schedule

Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the PM200P14 is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably.

The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size.

Fitment guidance

Sprint catalogue the PM200P14 for:

• KTM Duke 125 (2017 onwards)
• KTM Duke 200 (2020 onwards)
• KTM Duke 250 (2017 onwards)
• KTM Duke 390 (2017 onwards)
• KTM RC 390 and RC 390 R (2022 onwards)
• Husqvarna Svartpilen 125 (2021 onwards)
• Husqvarna Svartpilen 200 (2022 onwards)
• Husqvarna Svartpilen 250 (2020 onwards)
• Husqvarna Svartpilen 401 (2018 onwards)
• Husqvarna Vitpilen 401 (2018 onwards)

It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order.

Technical specifications

Brand: Sprint Filter
Part number: PM200P14
Media grade: P14
Material: dry non-woven filtering media
Filtration: down to 14 microns
Airflow: 1,800 l/m²/sec
Servicing: dry, clean with compressed air, no oiling
Country of manufacture: Italy