Collection

KTM Duke 390 Accessories

Race-grade upgrades for every bike & car

12 Products
Genuine partsGenuine performance parts
No cost EMI0% interest, easy instalments
Partial CODAdvance + balance on delivery
Secure checkout100% safe & encrypted
12 products

  • ngage-sintered-front-brake-pad-ktm-duke-rc-125-390_1080 NGage sintered brake pad compound and specifications

    Ngage Ngage Sintered Front Brake Pad for KTM Duke / RC/ADV 125, 200, 250 & 390

    12 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Harder-biting front pads for the KTM Duke, RC and Adventure. The NGage Sintered (HBS 184) is a direct replacement front pad for the KTM Duke, RC and the Gen 2 Adventure 250 and 390. Same shape and fit as the stock pads, so it drops straight into the original front caliper. Why riders switch to NGage Stronger bite, more heat. Sintered pads hold up to 1,000°C and bite harder under load. Prefer quieter, cleaner braking? The same pad comes in Whisker Ceramic (HB 184). Built for hard use. Metal powders fused under heat and pressure make a dense, wear-resistant pad that NGage rates for racing, off-road and street riding. ARAI tested, made in Japan. Brand new, in sealed NGage packaging, with a GST invoice. Drops straight in. Direct replacement for the stock pads. No modification to the caliper or disc. Ceramic or Sintered: which should I pick? Whisker Ceramic (HB 184) Sintered (HBS 184) Best for Daily riding, city and touring Hard riding, long descents, heavy loads, wet weather Feel Smooth, progressive bite Stronger initial bite Friction coefficient 0.45 to 0.60 0.55 to 0.65 Heat resistance Up to 650°C Up to 1,000°C Noise and dust Quieter, cleaner wheels A little more dust and noise This listing is the Sintered (HBS 184). The HB 184 is sold separately in the same fit. Fitment (front only) KTM Duke 125, 200, 250 and 390 RC 125, 200, 250 and 390 Adventure 250 and 390 (Gen 2) One pack fits one front caliper. Front and rear pads are different parts and are sold separately. Check before you order Adventure 250 and 390 Gen 3 take the NGage HB 164 at the front. For the rear see the NGage HBS 163 rear pad. Specifications Brand NGage Pad code HBS 184 (Sintered) Position Front Friction coefficient 0.55 to 0.65 Heat resistance Up to 1,000°C Pack contents 1 set (2 pads) for one front caliper Testing ARAI tested Made in Japan Fitting and bedding in Push the caliper pistons back gently, clean the pad slides, and fit the new pads with the friction side facing the disc. Check the disc. If it is scored, has a lip at the edge or is below its minimum thickness, replace it with the pads. Pump the lever or pedal until it is firm before you ride. Bed them in: 8 to 10 moderate stops from about 50 to 10 km/h, without coming to a full stop, then ride gently for a few minutes to let them cool. Go easy on hard braking for the first 150 to 200 km while the pads settle in. Not sure these fit your KTM? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,250.00 Rs. 2,239.00 ↓ You save Rs. 11.00

  • Rolon chain and sprocket kit in its retail box Rolon chain sprocket kit for KTM Duke 390 Gen 3: 14T front, 43T rear, 520 chain 111+1 links

    Rolon Rolon Brass Chain & Sprocket Kit for KTM Duke 390 Gen 3 2024 (BPR Kit HXRC 453NF)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon BPR brass-plated sealed chain and sprocket kit for the KTM Duke 390 Gen 3 (2024 onwards). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HXRC-111+1 Front sprocket 14T (S-02-1281), 2 holes Rear sprocket 43T (S-02-1149), 6 holes Rolon kit reference HXRC 453NF Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Hardened sprocket teeth for wear resistance and fatigue strength This is the 2024 Gen 3 Duke 390 kit and uses different gearing from the earlier Duke 390. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,308.00 Rs. 3,290.00 ↓ You save Rs. 18.00

  • Ngage HB184 Whisker Ceramic motorcycle front brake pads Ngage Whisker Ceramic Front Brake Pad for KTM Duke/ ADV/ RC -125, 200, 250 & 390 Ngage

    Ngage Ngage Whisker Ceramic Front Brake Pad for KTM Duke/ ADV/ RC -125, 200, 250 & 390

    21 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quiet, clean front braking for the KTM Duke, RC and Adventure. The NGage Whisker Ceramic (HB 184) is a direct replacement front pad for the KTM Duke, RC and the Gen 2 Adventure 250 and 390. Same shape and fit as the stock pads, so it drops straight into the original front caliper. Why riders switch to NGage Smooth and quiet. Whisker Ceramic gives a progressive bite and cleaner wheels. Want a harder bite? The same pad comes in Sintered (HBS 184). Whisker reinforced ceramic. Fine fibre-like whiskers in the ceramic compound add strength and keep the friction steady as the pads heat up. Rated for long life. NGage rates the Whisker Ceramic pad for up to 15,000 to 25,000 km in normal riding. ARAI tested, made in Japan. Brand new, in sealed NGage packaging, with a GST invoice. Drops straight in. Direct replacement for the stock pads. No modification to the caliper or disc. Ceramic or Sintered: which should I pick? Whisker Ceramic (HB 184) Sintered (HBS 184) Best for Daily riding, city and touring Hard riding, long descents, heavy loads, wet weather Feel Smooth, progressive bite Stronger initial bite Friction coefficient 0.45 to 0.60 0.55 to 0.65 Heat resistance Up to 650°C Up to 1,000°C Noise and dust Quieter, cleaner wheels A little more dust and noise This listing is the Whisker Ceramic (HB 184). The HBS 184 is sold separately in the same fit. Fitment (front only) KTM Duke 125, 200, 250 and 390 RC 125, 200, 250 and 390 Adventure 250 and 390 (Gen 2) One pack fits one front caliper. Front and rear pads are different parts and are sold separately. Check before you order Adventure 250 and 390 Gen 3 take the NGage HB 164 at the front. For the rear see the NGage HB 163 rear pad. Specifications Brand NGage Pad code HB 184 (Whisker Ceramic) Position Front Friction coefficient 0.45 to 0.60 Heat resistance Up to 650°C Rated life Up to 15,000 to 25,000 km (Whisker Ceramic, normal riding, as rated by NGage) Pack contents 1 set (2 pads) for one front caliper Testing ARAI tested Made in Japan Fitting and bedding in Push the caliper pistons back gently, clean the pad slides, and fit the new pads with the friction side facing the disc. Check the disc. If it is scored, has a lip at the edge or is below its minimum thickness, replace it with the pads. Pump the lever or pedal until it is firm before you ride. Bed them in: 8 to 10 moderate stops from about 50 to 10 km/h, without coming to a full stop, then ride gently for a few minutes to let them cool. Go easy on hard braking for the first 150 to 200 km while the pads settle in. Not sure these fit your KTM? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 1,400.00 Rs. 1,389.00 ↓ You save Rs. 11.00

  • New DP Brakes DP519 brake pads – DP Standard Sintered DP Brakes DP519 brake pads – DP Standard Sintered

    DP Brakes DP Brakes Front Brake Pads (DP 519) for KTM Duke 390, RC 390, Adventure 390, Duke 250, Bajaj Dominar 400, Triumph Speed 400, Scrambler 400X, Aprilia RS 457 & More

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 519 is the genuine front brake pad for the KTM 390 RC/Duke, Adventure 250/390 (till 2024), Bajaj Dominar 400, Triumph Speed 400, Scrambler 400, Aprilia RS 457 and more. MRP ₹3,499. Available on pre-order: we order it in for you after you place your order and confirm the dispatch date with you.Which bikes does DP 519 fit? KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025) Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards) TVS: RR310 BMW: G 310 R & G 310 GS Aprilia: RS 457 (2024) Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.CompoundDP 519 uses DP's standard sintered compound: excellent wet and dry performance, no brake fade and long service life. Many DP part numbers include a ceramic heat shield.Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking. More for your Dominar: all Dominar 400 & 250 parts · Rolon chain sprocket kit for Dominar 400 · NGK iridium 3-plug set for Dominar 400.

    Ships in 1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,499.00

  • New DP Brakes DP622 brake pads – DP Standard Sintered DP Brakes DP622 brake pads – DP Standard Sintered

    DP Brakes DP Brakes Rear Brake Pads (DP 622 / SDP 622) for Royal Enfield Classic 350, Hunter 350, Meteor 350, Himalayan 450, Interceptor 650, Continental GT 650 & More

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Quick answer: DP Brakes DP 622 / SDP 622 is the genuine rear brake pad for the Royal Enfield Goan Classic 350, Classic 350/500, Hunter 350, Meteor 350, Himalayan 450, Guerrilla 450 and more. Choose DP Standard sintered (₹3,499) for everyday street and touring use, or SDP Pro-MX (₹3,899) for stronger bite under hard use. In stock at Rawtorque and dispatched within 1–2 business days, shipped across India.Which bikes does DP 622 fit? Royal Enfield: Bear 650; Classic 350/500; Continental GT 650; Electra 350; Goan Classic 350; Guerrilla 450; Himalayan 411; Himalayan 450; Hunter 350; Interceptor 650; Meteor 350; Scram 411; Shotgun 650 (up to 2024); Super Meteor 650 (up to 2024); Thunderbird 350/500 KTM: 125 RC/Duke; 200 RC/Duke; 250 RC/Duke; 390 RC/Duke; Adventure 250/390 (2025); Adventure 250/390 (till 2024) Bajaj: Dominar 400 (2019-2025); Dominar 400 (up to 2018); NS 200; Pulsar 150/180/220; RS 200 Triumph: Scrambler 400 (2023 onwards); Speed 400 (2023 onwards); Street Triple 675 (2013-2017); Street Triple 675R (2013-2017); Street Triple 765RS (2021-2022); Tiger 1200 Rally GT (2022 onwards); Tiger 1200 Rally Pro (2022 onwards); Tiger 850 (2020 onwards); Tiger 900 (2020-2023); Tiger 900 (2024 onwards) TVS: RR310 Suzuki: Gixxer 150; Gixxer 250; V-Strom 250 SX BMW: F 650 GS (2008-2012); F 750 GS (2018-2023); F 850 GS (2018-2020); F 850 GS (2021-2023); F 850 GSA (2019-2020); F 850 GSA (2021-2023); F 900 GS (2024 onwards); F 900 RC (2020-2023); F 900 XR (2020-2023); F 900GSA (2024 onwards); G 310 R & G 310 GS; S 1000R Sport Brembo (2014-2020); S 1000RR (2010-2018); S 1000RR (2019-2022); S 1000RR Nissin Caliper (2019-2021) Jawa: 42; 42 Bobber; Classic; FJ; Perak Aprilia: RS 457 (2024) Ducati: Monster 797 (2017-2019); Scrambler 1100 (2018-2020); Scrambler 1100 (2021 onwards); Scrambler 1100 Sport (2018-2020); Scrambler 800 (2015-2018); Scrambler 800/ICON/DARK (2019-2022); Scrambler Desert Sled (2017-2023); Scrambler Icon 800 (2023 onwards) Ather: 450X The Continental GT 650 uses the same brake hardware as the Interceptor 650, so this pad fits both.Check your model, year and brake position before ordering. Not sure? Message us your bike details and we'll confirm fitment.DP vs SDP: which compound should I choose? DP 622 – DP Standard SDP 622 – SDP Pro-MX MRP ₹3,499 ₹3,899 Compound Standard sintered, premium OEM-style replacement DP's premium SDP sintered compound from the Pro-MX range, for stronger bite and consistency under hard use Best for Daily riding, touring, wet weather, long pad life Spirited riding, heavy loads, mountain descents Fit Identical shape and mounting; only the friction compound differs Buying DP Brakes in IndiaDP Brakes has made motorcycle brake pads in England since 1983 and supplies OEM manufacturers. In India they are imported by Race Dynamics; Rawtorque sells them at the official MRP with pan-India delivery from Kerala. Bed new pads in with a series of gradual stops before hard braking.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,499.00 - Rs. 3,899.00

  • Rolon chain and sprocket kit in its retail box Rolon chain sprocket kit for KTM Duke 390: 15T front, 45T rear, 520 chain 112 links

    Rolon Rolon Brass Chain & Sprocket Kit for KTM Duke 390 (BPR Kit HXRC 268)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon BPR brass-plated sealed chain and sprocket kit for the KTM Duke 390 (pre-2024 models). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HXRC-112-2 Front sprocket 15T (S 02 560), 2 holes Rear sprocket 45T (S 02 499), 6 holes Rolon kit reference HXRC 268 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Hardened sprocket teeth for wear resistance and fatigue strength For the 2024 Gen 3 Duke 390 use kit HXRC 453NF instead. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have. Brass chain or normal chain? Read our guide: What brass plating really does, and when a Rolon BPR kit is worth it.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,428.00 Rs. 3,410.00 ↓ You save Rs. 18.00

  • Save - Rs. 2,011.00 66BHP Venta floating brake disc 66bhp Venta floating front brake disc for KTM Duke 390, petal profile and floating bobbins

    66BHP 66bhp Venta Floating Brake Disc - KTM Duke 390 (2017-2023) | Sharper Stops, Zero Fade

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    The 66bhp Venta is an ultra premium floating front rotor for the KTM Duke 390, for riders who want a measurable gain in braking feel without a workshop visit. It installs in place of the original disc with no cutting, drilling or alteration.The rotor pairs a lightweight aluminium inner carrier with a high carbon stainless steel outer ring, joined by floating bobbins. That floating construction lets the braking surface move laterally against the carrier by a small controlled amount, which is what gives the lever its more progressive, better resolved feel. The petal profile and large ventilation cuts move heat out during repeated braking, so the bite point stays where you left it on a hard road ride or a track session.Key features 5.0mm high carbon stainless steel outer ring for a consistent, heat resistant braking surface Aluminium inner carrier, reducing rotating mass against a solid disc Floating bobbin system for progressive lever feel High ventilation petal profile for heat management under repeated braking Direct replacement for the original disc, no modification required FitmentThis rotor is listed for the KTM Duke 390, 2017 to 2023. 66BHP specifies the same 5.0mm Venta disc for the RC 390, and also for the Bajaj Dominar 400 UG and the Husqvarna Svartpilen 250 and Vitpilen 250. Some applications need a spacer or bolt kit. If you ride one of these, get in touch before ordering and we will help you confirm the right combination for your bike.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 10,000.00 Rs. 7,989.00 ↓ You save Rs. 2,011.00

  • NGage HPKIT-KTM390 spark plug kit for KTM Duke, RC, Adventure 250-390 and Bajaj NS400: black pencil resistor cap, red racing cable, splicer connector and VH8RTII-9 double iridium plug NGage HPKIT-KTM390 catalogue page listing kit contents and KTM / Husqvarna / Bajaj NS400 fitment

    Ngage NGage High Performance Spark Plug Kit for KTM Duke / RC / Adventure 250-390 & Bajaj NS400

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Precision Ignition Upgrade for the KTM 390 Platform The NGage High Performance Spark Plug Kit is engineered to improve ignition efficiency across KTM Duke, RC and Adventure 250-390 models and the Bajaj NS400. This is not just a plug replacement, it is a complete ignition upgrade designed for smoother, cleaner and more responsive performance. Improved Combustion Efficiency Combining an NGage Double Iridium spark plug with an ultra low-resistance racing cable, a resistor spark cap and a brass splicer connector, the kit delivers: Better spark consistency Cleaner, more complete combustion Reduced misfires Smoother, More Responsive Engine Improved throttle response Better acceleration feel More stable idle Reliable in All Conditions Easier cold starts Reliable ignition in wet weather Consistent performance from city riding to track use Built for Street & Performance Use Compatible with stock and modified setups Suitable for both BS4 and BS6 motorcycles Limited warranty, designed for a service life up to 1,00,000 km Fitment This kit is designed for the following KTM Gen2 / Gen3 and Bajaj models: KTM Duke 250 (2017-2023) KTM RC 390 (2015-2025) KTM Duke 390 / 390 R KTM Adventure 250 (2020-2022) KTM Adventure 390 / R / S / X KTM Enduro 390 R KTM Svartpilen 250 KTM Vitpilen 250 Bajaj NS400 (2024-2026) WHAT'S INCLUDED NGage Double Iridium Spark Plug (VH8RTII-9, made in Japan): 1 No NGage Resistor Spark Cap (LD05F-B, 5kΩ): 1 No NGage Racing Spark Plug Cable, ultra low resistance: 1 No NGage Brass Splicer Connector: 1 No

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 4,989.00

  • Save - Rs. 226.90 Race Dynamics FlashX Hazard Flash Module for KTM Duke / RC 390 – Plug and Play Motorcycle Indicator Controller

    Race Dynamics Race Dynamics FlashX Hazard Flash Module for KTM Duke / RC 390 (2012-2023)

    13 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    The KTM hazard flash module Race Dynamics FlashX Hazard Flash Module for KTM Duke and RC 390 (2012-2023) is a user-friendly and efficient electronic device. It enhances your motorcycle’s hazard flashing by integrating with the original indicator system. Developed by Race Dynamics, this KTM hazard flash module plugs directly into the stock wiring harness. Riders can control hazard flash patterns using the factory indicator switches, without needing extra wiring or parts. Effective hazard flashing improves rider visibility during breakdowns, roadside stops, poor lighting, or group rides. Many motorcycles, including popular models like the KTM Duke 390, lack factory-installed hazard lights or have limited flashing functions. This module addresses that by offering programmable hazard patterns. It maintains the bike's original controls and ease of use, making it an ideal upgrade. Plug-and-Play Integration with Stock Wiring for KTM Hazard Flash Module FlashX is designed as a plug-and-play module that connects directly into your KTM Duke 390’s indicator wiring. You do not need to cut, splice, or modify cables. It fits perfectly into the stock socket, ensuring a clean and reversible installation. By using your motorcycle’s original indicator switches, riders gain full control over hazard flashing without adding clutter to the handlebars. This preserves the sleek factory look of the KTM Duke series while introducing advanced functionality seamlessly. Multiple Hazard Flash Patterns for Diverse Riding Conditions The FlashX module offers an impressive selection of 60 distinct hazard blink patterns. Riders can easily select the desired flashing style through the bike’s indicator switches to match different riding scenarios or personal preferences. These flash patterns are designed to suit various situations such as emergencies, slow-moving traffic, or group rides. No external tools, apps, or software are required, just simple, direct control for added convenience and safety. Compatibility with LED and Conventional Indicators This KTM hazard flash module works reliably with both LED indicators and traditional bulb-type indicators. It supports stock motorcycles as well as those upgraded with aftermarket LED signals, like many KTM Duke 390 models. Such versatility prevents irregular blinking and enhances compatibility, provided the module is installed correctly by matching the electrical system of the bike. Durable Design Built for Everyday Riding Conditions Motorcycle electrical parts must endure intense vibrations, heat, and weather exposure. FlashX features a robust water-resistant casing to resist rain, humidity, and dust, ensuring reliable operation. Its compact and discreet design allows for an unobtrusive installation that limits heat build-up and reduces impact risks. The system reliably functions without interfering with your bike’s regular turn signal operation. Advanced Control Logic and Safety Features The FlashX module incorporates intelligent control logic that prioritizes normal turn signals over hazard flashing. Its Auto Pause feature temporarily stops hazard flashing when turn signals are activated, ensuring no interference during turns or lane changes. It also includes extra modes offering quick, slow, and patrol-style flash speeds. This allows riders to customize hazard behavior according to their visibility needs and riding conditions while encouraging responsible use in line with traffic regulations. KTM Hazard Flash Module Compatibility and Installation This KTM hazard flash module is specially engineered for the ktm Duke 390 and KTM RC 390 motorcycles manufactured between 2012 and 2023. Compatibility is based on the electrical system designs specific to these models. Proper fitting requires matching your model year. Installers should avoid using this module on motorcycles outside this range unless the manufacturer explicitly approves such usage. Installation and Warranty for the KTM Hazard Flash Module Installation is straightforward for technicians or experienced riders familiar with motorcycle electrical systems. The module plugs into the original wiring without requiring any permanent modifications, allowing easy removal if needed. The FlashX comes with a 3-year manufacturer warranty, reflecting Race Dynamics’ commitment to product reliability and long-term customer satisfaction.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,495.90 Rs. 2,269.00 ↓ You save Rs. 226.90

  • ngage sintered rear brake pad hb163 ktm duke rc NGage sintered brake pad compound and specifications

    Ngage Ngage Whisker Sintered Rear Brake Pad for KTM Duke / ADV/ RC 125, 200, 250 & 390

    15 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Harder-biting rear pads for the KTM Duke, RC and Adventure. The NGage Sintered (HBS 163) is a direct replacement rear pad for the KTM Duke, RC and Adventure 250 and 390. Same shape and fit as the stock pads, so it drops straight into the original rear caliper. Why riders switch to NGage Stronger bite, more heat. Sintered pads hold up to 1,000°C and bite harder under load. Prefer quieter, cleaner braking? The same pad comes in Whisker Ceramic (HB 163). Built for hard use. Metal powders fused under heat and pressure make a dense, wear-resistant pad that NGage rates for racing, off-road and street riding. ARAI tested, made in Japan. Brand new, in sealed NGage packaging, with a GST invoice. Drops straight in. Direct replacement for the stock pads. No modification to the caliper or disc. Ceramic or Sintered: which should I pick? Whisker Ceramic (HB 163) Sintered (HBS 163) Best for Daily riding, city and touring Hard riding, long descents, heavy loads, wet weather Feel Smooth, progressive bite Stronger initial bite Friction coefficient 0.45 to 0.60 0.55 to 0.65 Heat resistance Up to 650°C Up to 1,000°C Noise and dust Quieter, cleaner wheels A little more dust and noise This listing is the Sintered (HBS 163). The HB 163 is sold separately in the same fit. Fitment (rear only) KTM Duke 125, 200, 250 and 390 RC 125, 200, 250 and 390 Adventure 250 and 390 One pack fits one rear caliper. Front and rear pads are different parts and are sold separately. Check before you order For the front (Duke, RC, Adventure Gen 2) see the NGage HBS 184 front pad. For the front of the Adventure Gen 3 see the NGage HBS 164 front pad. Specifications Brand NGage Pad code HBS 163 (Sintered) Position Rear Friction coefficient 0.55 to 0.65 Heat resistance Up to 1,000°C Pack contents 1 set (2 pads) for one rear caliper Testing ARAI tested Made in Japan Fitting and bedding in Push the caliper pistons back gently, clean the pad slides, and fit the new pads with the friction side facing the disc. Check the disc. If it is scored, has a lip at the edge or is below its minimum thickness, replace it with the pads. Pump the lever or pedal until it is firm before you ride. Bed them in: 8 to 10 moderate stops from about 50 to 10 km/h, without coming to a full stop, then ride gently for a few minutes to let them cool. Go easy on hard braking for the first 150 to 200 km while the pads settle in. Not sure these fit your KTM? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,250.00 Rs. 2,189.00 ↓ You save Rs. 61.00

  • Ngage Whisker Ceramic Rear Brake Pad for KTM Duke/ ADV / RC 125, 200, 250 & 390 Ngage NGage whisker ceramic brake pad compound and specifications

    Ngage Ngage Whisker Ceramic Rear Brake Pad for KTM Duke/ ADV / RC 125, 200, 250 & 390

    22 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Smooth, quiet rear braking for the KTM Duke, RC and Adventure. The NGage Whisker Ceramic (HB 163) is a direct replacement rear pad for the KTM Duke, RC and Adventure 250 and 390. Same shape and fit as the stock pads, so it drops straight into the original rear caliper. Why riders switch to NGage Smooth and quiet. Whisker Ceramic gives a progressive bite and cleaner wheels. Want a harder bite? The same pad comes in Sintered (HBS 163). Whisker reinforced ceramic. Fine fibre-like whiskers in the ceramic compound add strength and keep the friction steady as the pads heat up. Rated for long life. NGage rates the Whisker Ceramic pad for up to 15,000 to 25,000 km in normal riding. ARAI tested, made in Japan. Brand new, in sealed NGage packaging, with a GST invoice. Drops straight in. Direct replacement for the stock pads. No modification to the caliper or disc. Ceramic or Sintered: which should I pick? Whisker Ceramic (HB 163) Sintered (HBS 163) Best for Daily riding, city and touring Hard riding, long descents, heavy loads, wet weather Feel Smooth, progressive bite Stronger initial bite Friction coefficient 0.45 to 0.60 0.55 to 0.65 Heat resistance Up to 650°C Up to 1,000°C Noise and dust Quieter, cleaner wheels A little more dust and noise This listing is the Whisker Ceramic (HB 163). The HBS 163 is sold separately in the same fit. Fitment (rear only) KTM Duke 125, 200, 250 and 390 RC 125, 200, 250 and 390 Adventure 250 and 390 One pack fits one rear caliper. Front and rear pads are different parts and are sold separately. Check before you order For the front (Duke, RC, Adventure Gen 2) see the NGage HB 184 front pad. For the front of the Adventure Gen 3 see the NGage HB 164 front pad. Specifications Brand NGage Pad code HB 163 (Whisker Ceramic) Position Rear Friction coefficient 0.45 to 0.60 Heat resistance Up to 650°C Rated life Up to 15,000 to 25,000 km (Whisker Ceramic, normal riding, as rated by NGage) Pack contents 1 set (2 pads) for one rear caliper Testing ARAI tested Made in Japan Fitting and bedding in Push the caliper pistons back gently, clean the pad slides, and fit the new pads with the friction side facing the disc. Check the disc. If it is scored, has a lip at the edge or is below its minimum thickness, replace it with the pads. Pump the lever or pedal until it is firm before you ride. Bed them in: 8 to 10 moderate stops from about 50 to 10 km/h, without coming to a full stop, then ride gently for a few minutes to let them cool. Go easy on hard braking for the first 150 to 200 km while the pads settle in. Not sure these fit your KTM? Message us on WhatsApp with your model, year or RC and we will help you choose.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 1,400.00 Rs. 1,389.00 ↓ You save Rs. 11.00

  • 66BHP Air Born suspension KTM Duke 390 Gen 2 rear shock installed Adjustable rear suspension with yellow spring KTM Duke

    66BHP 66BHP Air Born Performance Suspension for KTM Duke 390 Gen 2

    20 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Precision-Tuned Suspension Upgrade for Duke 390 Gen 2 The 66BHP Air Born Performance Suspension is engineered for KTM Duke 390 Gen 2, delivering improved handling control, stability, and ride comfort across varied riding conditions. Built with a focus on real-world usability, this suspension system integrates key adjustability features to fine-tune ride dynamics without compromising everyday usability. Multi-Point Adjustability Designed to give riders direct control over suspension behavior: Rebound adjustment to control return speed Compression adjustment for managing bump absorption Spring preload adjustment to suit rider weight and load This enables precise tuning for city riding, highway stability, and spirited use. Progressive Spring Setup Equipped with a performance-tuned spring configuration: Balanced response for daily riding and performance use Supports varying load conditions without compromising comfort Built for Real-World Riding Engineered to perform across Indian road conditions: Improved handling and cornering stability Better bump absorption and ride comfort More controlled behavior over uneven surfaces Direct Fitment and Setup Designed for straightforward installation and usability: Direct bolt-on fitment for KTM Duke 390 Gen 2 No chassis modification required Factory baseline setup included for easy starting point Practical Performance Benefits Focused on delivering measurable improvements: Sharper handling response Controlled suspension movement Improved rider confidence across speeds

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 29,989.00

Sharpen your KTM Duke 390.

The Duke 390 is a streetfighter built around sharp handling and strong power — and the right accessories protect and refine that edge. Rawtorque brings together protection and performance parts tuned to the Duke's aggressive geometry.

Explore frame sliders, crash guards, tail tidies, performance levers, handlebar mirrors, radiator guards, exhausts, FuelX and PowerTRONIC — each chosen for quality and a clean fit on the Gen 3 Duke 390.

Browse by part below. If you'd like help choosing the right upgrade for your Duke, our team is here to offer fitment guidance.

Frequently asked questions

What are the first upgrades for a Duke 390?

Frame sliders and crash guards for protection, a tail tidy for a cleaner rear, and a Stage 1 exhaust with FuelX or PowerTRONIC for sharper performance.

Do older Duke 390 parts fit the Gen 3?

The current Gen 3 Duke 390 differs from earlier generations, so fitment varies. Check the product listing, and ask us for fitment guidance if you're unsure.

Will these accessories fit my Duke 390?

Fitment varies by model year and generation. Check the product listing for compatibility, and reach out for fitment guidance if you'd like to confirm.

Do you deliver across India?

Yes — Rawtorque ships KTM Duke 390 accessories pan-India.

No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000

Login

Forgot your password?

Don't have an account yet?
Create account