Products

Brembo 09C87711 (front, 330 mm diameter) and Brembo 09C87811 (rear, 330 mm diameter) are the OE-specification brake discs for the Porsche CARRERA, 911 II CARRERA S COUPE 2017.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09C87711 Diameter 330 mm Thickness 34 mm Minimum thickness 32 mm Height 69 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584222973 Rear axle specification, 09C87811 Diameter 330 mm Thickness 28 mm Minimum thickness 26 mm Height 75 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584223000 Measure at the thinnest point across the braking surface: front is 34 mm new against a 32 mm minimum, rear is 28 mm new against a 26 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche CARRERA, 911 II CARRERA S COUPE 2017. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09C98521 (front, 350 mm diameter) and Brembo 09C98821 (rear, 330 mm diameter) are the OE-specification brake discs for the Porsche CAYENNE LATEST 2017 ONWARDS 9YA, Panamera 978.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09C98521 Diameter 350 mm Thickness 34 mm Minimum thickness 32 mm Height 69 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584239452 Rear axle specification, 09C98821 Diameter 330 mm Thickness 26 mm Minimum thickness 24 mm Height 74 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584239445 Measure at the thinnest point across the braking surface: front is 34 mm new against a 32 mm minimum, rear is 26 mm new against a 24 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche CAYENNE LATEST 2017 ONWARDS 9YA, Panamera 978. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D93911 (front, 360 mm diameter) and Brembo 09D94011 (rear, 356 mm diameter) are the OE-specification brake discs for the Porsche Macan Turbo.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09D93911 Diameter 360 mm Thickness 36 mm Minimum thickness 34 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584315767 Rear axle specification, 09D94011 Diameter 356 mm Thickness 28 mm Minimum thickness 26 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584317327 Measure at the thinnest point across the braking surface: front is 36 mm new against a 34 mm minimum, rear is 28 mm new against a 26 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche Macan Turbo. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09C54921 (front, 360 mm diameter) and Brembo 09C87821 (rear, 330 mm diameter) are the OE-specification brake discs for the Porsche Panamera old.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09C54921 Diameter 360 mm Thickness 36 mm Minimum thickness 34 mm Height 68 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584237311 Rear axle specification, 09C87821 Diameter 330 mm Thickness 28 mm Minimum thickness 26 mm Height 75 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584233320 Measure at the thinnest point across the braking surface: front is 36 mm new against a 34 mm minimum, rear is 28 mm new against a 26 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche Panamera old. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09A72711 (front, 280 mm diameter) and Brembo 08B36917 (rear, 260 mm diameter) are the OE-specification brake discs for the Renault Fluence/Duster AWD/Duster after 2015.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A72711 Diameter 280 mm Thickness 24 mm Minimum thickness 21.8 mm Height 44 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584210390 Rear axle specification, 08B36917 Diameter 260 mm Thickness 8 mm Minimum thickness 7 mm Height 86 mm Bolt holes 5 Centering bore 25 mm Disc type Solid Units per box 2 (left + right) EAN code 8020584039489 Measure at the thinnest point across the braking surface: front is 24 mm new against a 21.8 mm minimum, rear is 8 mm new against a 7 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Renault Fluence/Duster AWD/Duster after 2015. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D97911 (front, 305 mm diameter) and Brembo 08D41811 (rear, 281 mm diameter) are the OE-specification brake discs for the Toyota & Lexus.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09D97911 Diameter 305 mm Thickness 28 mm Minimum thickness 25 mm Height 49 mm Bolt holes 5 Centering bore 62 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584313251 Rear axle specification, 08D41811 Diameter 281 mm Thickness 112 mm Minimum thickness 10.5 mm Height 44 mm Bolt holes 5 Centering bore 62 mm Disc type Solid Units per box 2 (left + right) EAN code 8020584236659 Measure at the thinnest point across the braking surface: front is 28 mm new against a 25 mm minimum, rear is 112 mm new against a 10.5 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Toyota & Lexus. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09A20411 (front, 338 mm diameter) and Brembo 09A33421 (rear, 312 mm diameter) are the OE-specification brake discs for the Toyota New Fortuner/Land cruiser Prado.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A20411 Diameter 338 mm Thickness 28 mm Minimum thickness 26 mm Height 67 mm Bolt holes 6 Centering bore 108 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584032602 Rear axle specification, 09A33421 Diameter 312 mm Thickness 18 mm Minimum thickness 16 mm Height 68 mm Bolt holes 6 Centering bore 108 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584213773 Measure at the thinnest point across the braking surface: front is 28 mm new against a 26 mm minimum, rear is 18 mm new against a 16 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Toyota New Fortuner/Land cruiser Prado. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09A42621 (front, 316 mm diameter) and Brembo 09958711 (rear, 302 mm diameter) are the OE-specification brake discs for the Volvo S60 T6/Volvo S80.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A42621 Diameter 316 mm Thickness 28 mm Minimum thickness 26 mm Height 52 mm Bolt holes 5 Centering bore 64 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584234556 Rear axle specification, 09958711 Diameter 302 mm Thickness 22 mm Minimum thickness 20 mm Height 41 mm Bolt holes 5 Centering bore 64 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584958711 Measure at the thinnest point across the braking surface: front is 28 mm new against a 26 mm minimum, rear is 22 mm new against a 20 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Volvo S60 T6/Volvo S80. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09C93611 (front, 345 mm diameter) and Brembo 09C93811 (rear, 320 mm diameter) are the OE-specification brake discs for the Volvo xc 90 new (diesel)/XC 60 TYPE 2.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09C93611 Diameter 345 mm Thickness 30 mm Minimum thickness 27.5 mm Height 48 mm Bolt holes 5 Centering bore 64 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584228975 Rear axle specification, 09C93811 Diameter 320 mm Thickness 20 mm Minimum thickness 17.5 mm Height 43 mm Bolt holes 5 Centering bore 64 mm Disc type Ventilated Units per box 2 (left + right) EAN code 8020584228388 Measure at the thinnest point across the braking surface: front is 30 mm new against a 27.5 mm minimum, rear is 20 mm new against a 17.5 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Volvo xc 90 new (diesel)/XC 60 TYPE 2. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo L04210 is a fully synthetic DOT 4 brake fluid, low viscosity, supplied in a 1 litre bottle.Low viscosity fluid stays thinner at low temperature, which lets ABS and stability control systems move fluid quickly in cold conditions. Where a car specifies a low viscosity fluid, a standard one is not a substitute.The figures below are the minimums the DOT 4 standard itself requires, not measured values for this bottle.Specification Part number L04210 Standard DOT 4 Volume 1 litre Type Fully synthetic, glycol ether based Minimum dry boiling point for this standard 230 °C Minimum wet boiling point for this standard 155 °C Viscosity class Low viscosity Brake fluid is hygroscopic, meaning it absorbs moisture from the air over time, and that moisture lowers its boiling point long before the fluid looks dirty. Most manufacturers specify a change every two years regardless of mileage. Never mix a glycol-based fluid with DOT 5 silicone fluid, and never reuse fluid that has been opened and left standing.Which fluid does my car takeThe required specification is printed on your brake fluid reservoir cap and in the owner's handbook. A fluid meeting a higher DOT number may be used where a lower one is specified, but never the reverse. If you are unsure, send us your registration number and we will help you confirm it.Buying thisGST-inclusive pricing with a proper invoice, shipped across India.

Read more less

Brembo L15210 is a fully synthetic DOT 5.1 brake fluid, low viscosity, supplied in a 1 litre bottle.Low viscosity fluid stays thinner at low temperature, which lets ABS and stability control systems move fluid quickly in cold conditions. Where a car specifies a low viscosity fluid, a standard one is not a substitute.The figures below are the minimums the DOT 5.1 standard itself requires, not measured values for this bottle.Specification Part number L15210 Standard DOT 5.1 Volume 1 litre Type Fully synthetic, glycol ether based Minimum dry boiling point for this standard 260 °C Minimum wet boiling point for this standard 180 °C Viscosity class Low viscosity Brake fluid is hygroscopic, meaning it absorbs moisture from the air over time, and that moisture lowers its boiling point long before the fluid looks dirty. Most manufacturers specify a change every two years regardless of mileage. Never mix a glycol-based fluid with DOT 5 silicone fluid, and never reuse fluid that has been opened and left standing.Which fluid does my car takeThe required specification is printed on your brake fluid reservoir cap and in the owner's handbook. A fluid meeting a higher DOT number may be used where a lower one is specified, but never the reverse. If you are unsure, send us your registration number and we will help you confirm it.Buying thisGST-inclusive pricing with a proper invoice, shipped across India.

Read more less

Brembo 09726750-F is a front-axle brake disc for the Ferrari F430/360 (09726750), measuring 330 mm diameter and 28 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 330 mm Thickness 28 mm Minimum thickness 26 mm Height 41 mm Bolt holes 5 Centering bore 67 mm Disc type Ventilated Axle Front and rear Units per box 2 (left + right) EAN code 8020584726754 New thickness is 28 mm and the manufacturer's minimum is 26 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Ferrari F430/360 (09726750). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09878021 is a front-axle brake disc for the Aston Martin Vantage 355mm frt disc, measuring 355 mm diameter and 32 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 355 mm Thickness 32 mm Minimum thickness 30 mm Height 53 mm Bolt holes 5 Centering bore 71 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584878026 New thickness is 32 mm and the manufacturer's minimum is 30 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Aston Martin Vantage 355mm frt disc. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09B32413 is a front-axle brake disc for the Aston Martin Vantage 380 mm frt disc, measuring 380 mm diameter and 34 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 380 mm Thickness 34 mm Minimum thickness 32 mm Height 51 mm Bolt holes 5 Centering bore 71 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584039199 New thickness is 34 mm and the manufacturer's minimum is 32 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Aston Martin Vantage 380 mm frt disc. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09A82011 is a front-axle brake disc for the Audi A4 (2008 to 2016) & 2 more, measuring 314 mm diameter and 25 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 314 mm Thickness 25 mm Minimum thickness 23 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584026045 New thickness is 25 mm and the manufacturer's minimum is 23 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi A4 (2008 to 2016) & 2 more. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D05811 is a front-axle brake disc for the Audi A4 2016 onwards 8W diesel, measuring 318 mm diameter and 30 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 318 mm Thickness 30 mm Minimum thickness 28 mm Height 57 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584233986 New thickness is 30 mm and the manufacturer's minimum is 28 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi A4 2016 onwards 8W diesel. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09B97111 is a front-axle brake disc for the Audi A8 3.0 tdi 356mm, measuring 356 mm diameter and 34 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 356 mm Thickness 34 mm Minimum thickness 31.5 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584218372 New thickness is 34 mm and the manufacturer's minimum is 31.5 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi A8 3.0 tdi 356mm. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D05911 is a front-axle brake disc for the Audi New Q5 FYB, New Audi A6 2.0, measuring 338 mm diameter and 30 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 338 mm Thickness 30 mm Minimum thickness 28 mm Height 57 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584234181 New thickness is 30 mm and the manufacturer's minimum is 28 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi New Q5 FYB, New Audi A6 2.0. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09B03911 is a front-axle brake disc for the Audi Q5 (2010 to 2013) 3.0 TDI 345mm & 2 more, measuring 345 mm diameter and 29.5 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 345 mm Thickness 29.5 mm Minimum thickness 28 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584026120 New thickness is 29.5 mm and the manufacturer's minimum is 28 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi Q5 (2010 to 2013) 3.0 TDI 345mm & 2 more. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09B82211 is a front-axle brake disc for the Audi Q5 (2013 onwards) 2.0 TDI 320mm, A6 2.0 tdi (2011 Onwards) 320mm, measuring 320 mm diameter and 30 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 320 mm Thickness 30 mm Minimum thickness 28 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584213698 New thickness is 30 mm and the manufacturer's minimum is 28 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi Q5 (2013 onwards) 2.0 TDI 320mm, A6 2.0 tdi (2011 Onwards) 320mm. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D48143 is a front-axle brake disc for the Audi RS7/RS6 4ka model 420MM, measuring 420 mm diameter and 40 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 420 mm Thickness 40 mm Minimum thickness 38 mm Height 57 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584316955 New thickness is 40 mm and the manufacturer's minimum is 38 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi RS7/RS6 4ka model 420MM. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D48133 is a front-axle brake disc for the Audi RSQ8, measuring 420 mm diameter and 40 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 420 mm Thickness 40 mm Minimum thickness 38 mm Height 52.7 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584329962 New thickness is 40 mm and the manufacturer's minimum is 38 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi RSQ8. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D42311 is a front-axle brake disc for the Audi S5 3.0 2018 onwards, measuring 349 mm diameter and 34 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 349 mm Thickness 34 mm Minimum thickness 32 mm Height 57 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584315859 New thickness is 34 mm and the manufacturer's minimum is 32 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi S5 3.0 2018 onwards. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less