Triumph Scrambler 400 X Stage 1 Performance Kit

The NGage VH8RTII-9 Double Iridium Spark Plug is a precision ignition component developed for modern, fuel-injected motorcycles, including the Triumph Speed 400, Scrambler 400X, and Speed T4. Manufactured in Japan, this spark plug is part of NGage’s Double Iridium series and is specified for use in both BS4 and BS6 compliant motorcycles, as stated by the manufacturer. This listing focuses exclusively on its application for Triumph’s 400-class single-cylinder platform, where the VH8RTII-9 spark plug specification is listed by NGage in its official compatibility chart. It is intended as a direct replacement spark plug for these motorcycles, without modification. Designed for Triumph 400-Class Motorcycles Triumph’s 400-class motorcycles represent a new-generation, liquid-cooled, fuel-injected single-cylinder engine platform developed for modern combustion and emission standards. NGage specifies the VH8RTII-9 spark plug for this engine family, indicating alignment with the ignition system design and operating parameters of these motorcycles. The following Triumph models are listed by NGage for use with the VH8RTII-9 spark plug: Triumph Speed 400 Triumph Scrambler 400X Triumph Speed T4 For these motorcycles, the VH8RTII-9 is intended to function as a like-for-like replacement for the factory-specified spark plug type. It is not positioned as a tuning component or a modification-driven upgrade, but as a specification-correct ignition part for routine service or replacement. Double Iridium Spark Plug Construction NGage classifies the VH8RTII-9 as a Double Iridium spark plug, meaning iridium material is used on both the center electrode and the ground electrode. Iridium is used in modern spark plug construction due to its high melting point and resistance to electrode erosion during repeated ignition cycles. This construction approach is commonly applied in motorcycles with high-energy ignition systems and tightly controlled combustion environments. The double-iridium configuration is intended to maintain consistent electrode geometry over extended operating periods under normal riding conditions. NGage does not publish electrode dimensions, spark-gap values, heat-range explanations, or service-interval figures for this model. BS4 and BS6 Compatibility NGage specifies that the VH8RTII-9 spark plug is compatible with both BS4 and BS6 vehicles. This makes it suitable for use across production years that fall before and after the BS6 emission-standard transition, provided the motorcycle is included in the compatibility list. For Triumph’s 400-class motorcycles, this ensures suitability across emission-compliant variants without requiring a change in spark plug specification. No emission-reduction, fuel-efficiency, or tuning claims are made for this product. Manufacturing Origin The VH8RTII-9 spark plug is manufactured in Japan, as stated on NGage’s product packaging. NGage does not publish further information regarding production processes, certifications, or testing standards for this model. The country of manufacture is provided here as factual product information only. Intended Use The NGage VH8RTII-9 is intended for routine replacement during scheduled maintenance or spark-plug service intervals recommended by the motorcycle manufacturer. It is suitable for everyday road use on the Triumph Speed 400, Scrambler 400X, and Speed T4 within standard operating conditions. This spark plug is not positioned by NGage as a racing-only, track-specific, or specialized tuning component. Fitment Accuracy Correct spark plug selection is critical for engine operation and long-term reliability. The VH8RTII-9 should be installed only on motorcycles listed in the compatibility section below. Use on non-listed motorcycles is not recommended. For the Triumph 400-class motorcycles, this spark plug is specified by NGage as the correct application for this engine platform. Compatibility As per NGage official compatibility chart for part number VH8RTII-9: Triumph Motorcycles Triumph Speed 400 Triumph Scrambler 400X Triumph Speed T4 Variant Explanation This listing is for NGage VH8RTII-9 Double Iridium Spark Plug only. “Double Iridium” refers to iridium usage on both the center and ground electrodes. This part number represents a single manufacturer-defined specification. No alternate heat ranges or material variants are included in this listing. Specifications (Only Verified Data) Brand: NGage Part Number: VH8RTII-9 Spark Plug Type: Double Iridium Vehicle Compatibility: BS4 & BS6 Country of Manufacture: Japan Application: Motorcycle spark plug Installation / Usage Notes Install only on Triumph motorcycles listed in the compatibility section. Follow Triumph service-manual torque specifications. Install on a cold engine. Install as per the motorcycle manufacturer’s service manual torque specification and standard spark plug installation procedure. Terminal Type This plug is supplied with a bare threaded terminal stud. That is how it leaves the factory, and no terminal nut is fitted. A plug cap that screws onto the thread fits as supplied. If your cap seats on a terminal nut instead, a standard screw-on spark plug terminal nut can be fitted to the stud.

Read more less

NGage Hyper Flow Air Filter (NGAGE-019TRI400) for Triumph Speed 400, Scrambler 400X & T4, Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-019TRI400) is a reusable, washable cotton-gauze air filter developed specifically for Triumph motorcycles built on the 400 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Triumph Speed 400Triumph Scrambler 400X, and Triumph T4. As stated on the official NGage product artwork, this air filter is compatible with the following motorcycles: Triumph Speed 400 Triumph Scrambler 400X Triumph T4 This listing covers these three models exactly as specified by the manufacturer. Designed for Triumph Speed 400, Scrambler 400X & T4 NGage specifies this Hyper Flow Air Filter for Triumph motorcycles built on the 400 cc platform. From the NGage product artwork: Fits: Speed 400 Scrambler 400X T4 The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-019TRI400 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded cylindrical filter body to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and feature icons, the NGage Hyper Flow Air Filter NGAGE-019TRI400 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the NGage product artwork and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-019TRI400: Triumph Speed 400 Triumph Scrambler 400X Triumph T4 Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-019TRI400 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-019TRI400 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Triumph Speed 400, Triumph Scrambler 400X, Triumph T4 Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Triumph Speed 400, Scrambler 400X, and T4 motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

Sprint Filter CM267S P08 Air Filter for Triumph Speed 400 / Scrambler 400 X The 398cc TR-series single is a willing engine with a compact airbox. The Sprint Filter CM267S is the maximum-airflow grade Sprint catalogue for it. It drops straight into the factory airbox and replaces the paper element for good. A dry filter, not an oiled one Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it. Sprint Filter's P08 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine. The numbers Sprint publishes Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective: Filtration: traps debris down to 80 microns Airflow: 5,050 litres per square metre per second Media: single-layer polyester tissue, 70 micron wire diameter Servicing: dry, compressed air only Which Sprint grade is right for you Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave: P08 (this filter): 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces. P14: 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use. T12: 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions. Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike. Built to outlast the service schedule Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the CM267S is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably. The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size. Fitment guidance Sprint catalogue the CM267S for: Triumph Speed 400 (2024 onwards) Triumph Scrambler 400 X (2024 onwards) Triumph Tracker 400 (2026 onwards) It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order. Technical specifications Brand: Sprint Filter Part number: CM267S Media grade: P08 Material: single-layer polyester tissue, 70 micron wire diameter Filtration: down to 80 microns Airflow: 5,050 l/m²/sec Servicing: dry, clean with compressed air, no oiling Country of manufacture: Italy

Read more less

The Red Rooster Blaze Header Pipe is the second half of the Blaze system. Where the Blaze silencer changes how the exhaust exits, the header changes how it leaves the cylinder, and the two were designed to work as one. It is a mandrel-bent stainless steel single-piece header with a wider bore than the stock item. Less restriction at the front of the system means the engine breathes more freely under load, with a cleaner throttle pickup through the mid range and a fuller note. Fitted alongside the Blaze silencer it completes the full system rather than a slip-on. The finish is a matter of preference alone. Polish, Black and Matte are identical in bore, bends and mounting, so the choice changes the look and nothing else. Some blueing near the head is normal on stainless steel after heat cycles and does not affect strength or performance. Fitment guidance Red Rooster lists this header pipe against the following Triumph 400 platform models: Triumph Speed 400 Triumph Speed T4 Triumph Scrambler 400 X If you are unsure which of these you have, or you are pairing the header with a silencer you already own, message us before ordering and we will help you confirm it. Specifications Brand: Red Rooster Performance Product line: Blaze Product type: Exhaust header pipe Material: Stainless steel Construction: Mandrel-bent single piece Finish options: Polish, Black, Matte Mounting: Direct bolt-on to factory points ECU remap required: Not mandatory Installation The header bolts on at the factory mounting points, so no cutting or welding is involved. We still recommend a workshop fit, mainly to get the alignment and torque right at the head, which is what keeps the joint sealed over time. In the box 1 x Red Rooster Blaze header pipe in the finish you select Mounting hardware

Read more less

The Red Rooster Blaze Exhaust for Triumph Scrambler 400X is not built to shout. It’s built to refine, strengthen, and sharpen what the Scrambler already does well. Designed specifically for the Triumph Scrambler 400X platform, the Blaze is a precision-engineered performance exhaust that enhances throttle response, mid-range torque, and overall ride feel while maintaining structural reliability and long-term durability. This is not a universal slip-on adapted to fit. It is tuned for the 400X’s single-cylinder character and power delivery. Constructed using high-grade stainless steel (Grade 304), the Blaze exhaust system is built to handle sustained heat cycles, vibration, long highway runs, and off-road abuse. CNC-machined components ensure precise tolerances and proper alignment with factory mounting points. The reduced overall weight compared to the stock unit improves agility, especially during quick direction changes, gravel riding, and uneven terrain transitions. Sound is where the Blaze makes its presence known, not through excessive volume, but through depth and control. The exhaust note is deeper, fuller, and more authoritative without becoming harsh or metallic. It enhances the Scrambler 400X’s natural thump while keeping rideability intact for daily commuting, touring, and extended saddle time. Internally, the Blaze uses performance-focused packing and optimized flow pathways to maintain stable back pressure. This balance is critical. Too little restriction reduces rideability. Too much restriction kills response. The Blaze strikes that equilibrium, smoother roll-ons, cleaner acceleration, and improved throttle modulation across the rev range. Whether you're climbing broken terrain, navigating city traffic, or cruising highways at steady RPM, the Red Rooster Blaze Exhaust maintains tone consistency and performance stability. Thermal management remains controlled even in high ambient temperatures, making it suitable for Indian riding conditions. Finish Options, Polish, Black, and Matte The Red Rooster Blaze Exhaust for Triumph Scrambler 400X is available in three finish variants: • Polish FinishA classic stainless steel shine that highlights the mechanical form of the exhaust. Ideal for riders who want a factory-custom aesthetic. • Black FinishA heat-resistant coated finish that delivers a stealthier look while maintaining corrosion resistance. • Matte FinishA balanced visual profile with subdued industrial character. All three variants share identical internal construction and performance tuning. The difference is purely aesthetic. Real-World Riding Benefits On the road, the improvements feel practical, not exaggerated. • Sharper throttle pickup• More responsive mid-range power delivery• Improved engine breathing• Reduced overall weight vs stock exhaust• Controlled, bass-heavy exhaust note The Scrambler 400X retains its touring comfort while gaining a more expressive mechanical personality. Installation & Compatibility The Red Rooster Blaze Exhaust for Triumph Scrambler 400X is designed as a direct bolt-on system. No cutting.No welding.No permanent modifications.No ECU remap required. The kit includes all necessary mounting hardware for a clean installation using stock mounting points. The fitment preserves chassis geometry and clearance for suspension travel and cornering lean. Built for Terrain, Not Just Show This exhaust is engineered for riders who actually use the Scrambler 400X as intended, mixed terrain, long-distance riding, and real-world abuse. The stainless steel body resists corrosion from water crossings, humidity, and daily riding exposure. Structural weld integrity is maintained to withstand vibration stress and continuous riding conditions. The Blaze is not built as a cosmetic add-on. It is a performance upgrade aligned with Triumph Scrambler 400X dynamics. Why Choose the Red Rooster Blaze Exhaust for Triumph Scrambler 400X? Because it improves what matters: • Ride response• Mechanical sound character• Weight balance• Durability under heat and terrain stress• Factory-fit precision It does not overpower the motorcycle’s identity. It strengthens it. The Red Rooster Blaze Exhaust for Triumph Scrambler 400X delivers deeper tone, refined throttle feel, and engineered durability in a properly tuned stainless steel package. This is performance you feel, not noise you tolerate.

Read more less