Mitsubishi

Brembo P54030 is a front-axle brake pad set from Brembo's Prime range for the Mitsubishi OUTLANDER II (2006 - 2012), Cedia, measuring 145 mm wide, 55 mm tall and 16 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 145 mm Height 55 mm Thickness 16 mm Braking system Akebono WVA number 23584 FMSI D866 7741 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584054772 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Mitsubishi OUTLANDER II (2006 - 2012), Cedia. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

NGK Iridium IX. A 0.6mm fine-wire iridium centre electrode in place of a conventional one, firing a sharper, more focused spark. That gives easier cold starts, a steadier idle and cleaner combustion, with a service life well beyond the nickel plug it replaces. Direct fit. Nothing to adjust. Find your car Mitsubishi  Takes 4 Lancer 1.5 Lancer 1.8 The Cedia 2.0 takes the BKR5EIX-11, also on our site. Specifications Part number · BPR5EIX-11 Type · Iridium IX, 0.6mm fine wire Heat range · 5 Sold as · pack of 4 Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your model and year and we will confirm before you order.

Read more less

Pagid T3025N is a front-axle brake pad set for the Mitsubishi Pajero Classic, using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the Mitsubishi Pajero Classic. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

Icer 181375 is a rear-axle brake pad set for the Mitsubishi OUTLANDER II (2006 - 2012), using the Icer compound, a Spanish-made pad from Europe's largest independent friction manufacturer and an OE supplier to European carmakers.Icer characteristics Manufacturer Icer Brakes, Spain, founded 1961 OE status Tier 1 and Tier 2 supplier to European carmakers Intended use Everyday road driving Approval ECE R90 compliant Quality system AENOR certified Fitment guidanceListed against the Mitsubishi OUTLANDER II (2006 - 2012). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Icer.

Read more less

Pagid T1254N is a rear-axle brake pad set for the Mitsubishi PAJERO SPORTS II (2008 - ), using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the Mitsubishi PAJERO SPORTS II (2008 - ). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

Pagid T2456N is a front-axle brake pad set for the Mitsubishi PAJERO SPORTS II (2008 - ), using the Pagid OEM compound, an OE-quality replacement pad from an original-equipment supplier.Pagid OEM characteristics Intended use Everyday road driving Equivalence OE-quality replacement Heritage Pagid is an OE brake supplier to European manufacturers Fitment guidanceListed against the Mitsubishi PAJERO SPORTS II (2008 - ). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by Pagid.

Read more less

Icer 181746 is a rear-axle brake pad set for the Mitsubishi CEDIA, using the Icer compound, a Spanish-made pad from Europe's largest independent friction manufacturer and an OE supplier to European carmakers.Icer characteristics Manufacturer Icer Brakes, Spain, founded 1961 OE status Tier 1 and Tier 2 supplier to European carmakers Intended use Everyday road driving Approval ECE R90 compliant Quality system AENOR certified Fitment guidanceListed against the Mitsubishi CEDIA. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by Icer.

Read more less

Icer 181806 is a front-axle brake pad set for the Mitsubishi CEDIA / OUTLANDER II (2006 - 2012), using the Icer compound, a Spanish-made pad from Europe's largest independent friction manufacturer and an OE supplier to European carmakers.Icer characteristics Manufacturer Icer Brakes, Spain, founded 1961 OE status Tier 1 and Tier 2 supplier to European carmakers Intended use Everyday road driving Approval ECE R90 compliant Quality system AENOR certified Fitment guidanceListed against the Mitsubishi CEDIA / OUTLANDER II (2006 - 2012). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by Icer.

Read more less

Brembo Sport 07.B314.09 is a brake pad set for the Mitsubishi CEDIA, using the Brembo Sport compound, a higher-friction pad built to resist fade under sustained hard braking.Brembo Sport characteristics Intended use Sport driving, paired with Brembo Max or Xtra discs Character Superior performance and fade resistance Technical content Exceeds OE Identification Black backplate, red shim Approval Brembo certified quality, ECE R90 Fitment guidanceListed against the Mitsubishi CEDIA. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by Brembo Sport.Is this the right pad for your car?Brembo Sport is built around heat. It holds its bite through repeated hard stops where a standard pad would begin to fade. That resistance comes from a compound formulated to work warm. Choose Sport Spirited driving, track days, hill runs and towing. You want fade resistance above everything else. Choose Prime City and highway driving. You want strong bite from cold, quiet running and low dust. Worth knowing before you order. Cold, in ordinary traffic, a Sport pad bites less than an OE-specification pad until it has warmed through, and it runs a little noisier. That is the trade for fade resistance, not a fault. If most of your driving is on the road, the Prime pad is the better brake.The road pad for this car is Brembo Prime P54030, ₹3,532.

Read more less

NGK Iridium IX. A 0.6mm fine-wire iridium centre electrode in place of a conventional one, firing a sharper, more focused spark. That gives easier cold starts, a steadier idle and cleaner combustion, with a service life well beyond a nickel plug. Direct fit. Nothing to adjust. Find your car Toyota · Corolla  Takes 4 Mitsubishi · Cedia 2.0  Takes 4 Watch the suffix. The plain BKR5EIX is a different plug, for the Tata Nano GenX and Fiat Palio 1.6. The Mitsubishi Lancer takes the BPR5EIX-11. Specifications Part number · BKR5EIX-11 Type · Iridium IX, 0.6mm fine wire Heat range · 5 Sold as · pack of 2, 3 or 4 Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your model and year and we will confirm before you order.

Read more less

Brembo P54031X is a rear-axle brake pad set for the Mitsubush OUTLANDER II (2006 - 2012), measuring 91 - 111 mm wide and 45 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 91 - 111 mm Thickness 16 mm Height 45 mm Braking system Akebono WVA number 23582,23583 FMSI D1343 7743, D868 7743 Wear indicator Acoustic Accessories With anti-squeal shim With piston clip Axle Rear EAN code 8020584121672 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mitsubush OUTLANDER II (2006 - 2012). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P54030X is a front-axle brake pad set for the Mitsubush Cedia, OUTLANDER II (2006 - 2012), measuring 145 mm wide and 55 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 145 mm Thickness 16 mm Height 55 mm Braking system Akebono WVA number 23584 FMSI D866 7741 Wear indicator Acoustic Accessories With anti-squeal shim With accessories Axle Front EAN code 8020584069028 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mitsubush Cedia, OUTLANDER II (2006 - 2012). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo 09A19711 is a rear-axle brake disc for the Mitsubush EVO X, measuring 330 mm diameter and 22 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 330 mm Thickness 22 mm Minimum thickness 20 mm Height 59 mm Bolt holes 5 Centering bore 80 mm Disc type Ventilated Axle Rear Units per box 1 EAN code 8020584227978 New thickness is 22 mm and the manufacturer's minimum is 20 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubush EVO X. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09B63611 (front, 332 mm diameter) and Brembo 09B63711 (rear, 332 mm diameter) are the OE-specification brake discs for the Mitsubishi Montero.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09B63611 Diameter 332 mm Thickness 28 mm Minimum thickness 26 mm Height 56 mm Bolt holes 6 Centering bore 94 mm Disc type Ventilated Units per box 1 EAN code 8020584213834 Rear axle specification, 09B63711 Diameter 332 mm Thickness 18 mm Minimum thickness 16 mm Height 74 mm Bolt holes 6 Centering bore 95 mm Disc type Ventilated Units per box 1 EAN code 8020584220979 Measure at the thinnest point across the braking surface: front is 28 mm new against a 26 mm minimum, rear is 18 mm new against a 16 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubishi Montero. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09A86811 (front, 294 mm diameter) and Brembo 09D41311 (rear, 315 mm diameter) are the OE-specification brake discs for the Mitsubishi PAJERO SPORTS II (2008 - ).Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A86811 Diameter 294 mm Thickness 28 mm Minimum thickness 26.4 mm Height 46 mm Bolt holes 6 Centering bore 94 mm Disc type Ventilated Units per box 1 EAN code 8020584222232 Rear axle specification, 09D41311 Diameter 315 mm Thickness 18 mm Minimum thickness 16.4 mm Height 84 mm Bolt holes 6 Centering bore 94 mm Disc type Ventilated Units per box 1 EAN code 8020584234693 Measure at the thinnest point across the braking surface: front is 28 mm new against a 26.4 mm minimum, rear is 18 mm new against a 16.4 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubishi PAJERO SPORTS II (2008 - ). Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09A73811 (front, 294 mm diameter) and Brembo 08A75511 (rear, 302 mm diameter) are the OE-specification brake discs for the Mitsubishi OUTLANDER II (2006 - 2012).Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A73811 Diameter 294 mm Thickness 24 mm Minimum thickness 22.4 mm Height 46 mm Bolt holes 5 Centering bore 69 mm Disc type Ventilated Units per box 1 EAN code 8020584032770 Rear axle specification, 08A75511 Diameter 302 mm Thickness 10 mm Minimum thickness 8.4 mm Height 59 mm Bolt holes 5 Centering bore 80 mm Disc type Solid Units per box 1 EAN code 8020584032855 Measure at the thinnest point across the braking surface: front is 24 mm new against a 22.4 mm minimum, rear is 10 mm new against a 8.4 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubishi OUTLANDER II (2006 - 2012). Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09A19611 is a front-axle brake disc for the Mitsubush EVO X, measuring 350 mm diameter and 32 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 350 mm Thickness 32 mm Minimum thickness 30 mm Height 44 mm Bolt holes 5 Centering bore 69 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584227251 New thickness is 32 mm and the manufacturer's minimum is 30 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubush EVO X. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09A19313 is a front-axle brake disc for the Mitsubush EVO X, measuring 350 mm diameter and 32 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 350 mm Thickness 32 mm Minimum thickness 30 mm Height 44 mm Bolt holes 5 Centering bore 69 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584039076 New thickness is 32 mm and the manufacturer's minimum is 30 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubush EVO X. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09A14841 (front, 276 mm diameter) and Brembo 08831611 (rear, 262 mm diameter) are the OE-specification brake discs for the Mitsubishi Cedia.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09A14841 Diameter 276 mm Thickness 26 mm Minimum thickness 24.4 mm Height 46 mm Bolt holes 4 Centering bore 69 mm Disc type Ventilated Units per box 1 EAN code 8020584216422 Rear axle specification, 08831611 Diameter 262 mm Thickness 10 mm Minimum thickness 8.4 mm Height 60 mm Bolt holes 4 Centering bore 90 mm Disc type Solid Units per box 1 EAN code 8020584214107 Measure at the thinnest point across the braking surface: front is 26 mm new against a 24.4 mm minimum, rear is 10 mm new against a 8.4 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubishi Cedia. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09807111 (front, 276 mm diameter) and Brembo 08710611 (rear, 315 mm diameter) are the OE-specification brake discs for the Mitsubishi Pajero Classic.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09807111 Diameter 276 mm Thickness 24 mm Minimum thickness 22.4 mm Height 45 mm Bolt holes 6 Centering bore 87 mm Disc type Ventilated Units per box 1 EAN code 8020584032794 Rear axle specification, 08710611 Diameter 315 mm Thickness 18 mm Minimum thickness 16.4 mm Height 84 mm Bolt holes 6 Centering bore 108 mm Disc type Solid Units per box 1 EAN code 8020584032664 Measure at the thinnest point across the braking surface: front is 24 mm new against a 22.4 mm minimum, rear is 18 mm new against a 16.4 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubishi Pajero Classic. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09705611 is a front-axle brake disc for the Mitsubush LANCER, measuring 236 mm diameter and 18 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 236 mm Thickness 18 mm Minimum thickness 16.4 mm Height 45 mm Bolt holes 4 Centering bore 64 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584210512 New thickness is 18 mm and the manufacturer's minimum is 16.4 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mitsubush LANCER. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

BMC FB802/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB802/01 is a direct-fit washable performance air filter that fits the Mitsubishi Montero (2007+). Engine fitments: 2.8 D.This is a direct replacement for the factory paper element, it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable: clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car, please confirm quantity for your exact variant before ordering.

Read more less

Brembo P83024 is a rear-axle brake pad set from Brembo's Prime range for the Mitsubishi Montero (5 door), measuring 116 mm wide, 44 mm tall and 15 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Rear Width 116 mm Height 44 mm Thickness 15 mm Braking system Sumitomo WVA number 21947 FMSI D606 7487 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Not built into the pad Approval ECE R90 type-approved EAN code 8020584057599 This set does not have a wear indicator built into the pad. If your Mitsubishi Montero (5 door) uses an electronic brake wear sensor, that sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mitsubishi Montero (5 door). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less