Husqvarna Motorcycle Accessories & Performance Parts

Sprint Filter PM200P14 Air Filter for KTM Duke / RC and Husqvarna, previous generation The previous-generation KTM singles are still everywhere on Indian roads, and most are on their third or fourth paper filter. The Sprint Filter PM200P14 is the last one you buy. It drops straight into the factory airbox and replaces the paper element for good. A dry filter, not an oiled one Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it. Sprint Filter's P14 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine. The numbers Sprint publishes Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective: Filtration: traps debris down to 14 microns Airflow: 1,800 litres per square metre per second Media: dry non-woven filtering media Servicing: dry, compressed air only Which Sprint grade is right for you Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave: P08 — 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces. P14 (this filter) — 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use. T12 — 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions. Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike. Built to outlast the service schedule Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the PM200P14 is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably. The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size. Fitment guidance Sprint catalogue the PM200P14 for: KTM Duke 125 (2017 onwards) KTM Duke 200 (2020 onwards) KTM Duke 250 (2017 onwards) KTM Duke 390 (2017 onwards) KTM RC 390 and RC 390 R (2022 onwards) Husqvarna Svartpilen 125 (2021 onwards) Husqvarna Svartpilen 200 (2022 onwards) Husqvarna Svartpilen 250 (2020 onwards) Husqvarna Svartpilen 401 (2018 onwards) Husqvarna Vitpilen 401 (2018 onwards) It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order. Technical specifications Brand: Sprint Filter Part number: PM200P14 Media grade: P14 Material: dry non-woven filtering media Filtration: down to 14 microns Airflow: 1,800 l/m²/sec Servicing: dry, clean with compressed air, no oiling Country of manufacture: Italy

Read more less

Sprint Filter PM293P14 Air Filter for KTM Duke / Adventure and Husqvarna, 2024 onwards The current-generation KTM and Husqvarna singles rev hard and pull air fast. The Sprint Filter PM293P14 keeps the intake clean on dusty roads without the oiling routine. It drops straight into the factory airbox and replaces the paper element for good. A dry filter, not an oiled one Almost every performance air filter sold in India is oiled cotton gauze. It works, but it comes with a routine: strip it, wash it, dry it completely, re-oil it evenly, and hope you did not over-oil it. Sprint Filter's P14 media is different. It is a dry filter: to service it you take it out, blow it through with compressed air, and put it back. No cleaning solvents, no oil, no drying time, and no risk of oil residue migrating downstream into the intake tract of a fuel-injected engine. The numbers Sprint publishes Sprint Filter is unusually specific about its media, which makes it possible to compare grades honestly rather than by adjective: Filtration: traps debris down to 14 microns Airflow: 1,800 litres per square metre per second Media: dry non-woven filtering media Servicing: dry, compressed air only Which Sprint grade is right for you Sprint make three media grades, and the trade-off between airflow and filtration is real. More airflow means a coarser weave: P08 — 80 micron, 5,050 l/m²/sec. Road and track use on sealed surfaces. P14 (this filter) — 14 micron, 1,800 l/m²/sec. Finer filtration for genuinely dusty routes and high-mileage daily use. T12 — 7 micron, 560 l/m²/sec. Off-road, gravel and desert conditions. Not every grade is made for every motorcycle. If you are unsure which one suits how you actually ride, ask us before ordering and we will tell you what Sprint catalogue for your bike. Built to outlast the service schedule Polyester is a manmade fibre and, looked after properly, shows no meaningful loss of structure or filtering performance over time. Where a paper element is a consumable you buy again at every service, the PM293P14 is a component you fit once and clean periodically. Over the life of the motorcycle that changes the arithmetic considerably. The element is manufactured in Italy by Sprint Filter, who supply filters into World Superbike and Grand Prix paddocks. This is the same media technology, in a road-legal replacement size. Fitment guidance Sprint catalogue the PM293P14 for: KTM Duke 125 (2024 onwards) KTM Duke 250 (2024 onwards) KTM Duke 390 (2024 onwards) KTM 390 Adventure (2024 onwards) Husqvarna Svartpilen 125 (2024 onwards) Husqvarna Svartpilen 401 (2024 onwards) Husqvarna Vitpilen 401 (2024 onwards) It is a drop-in replacement for the factory element and requires no modification to the airbox, no trimming and no additional hardware. If you are unsure whether this is the correct part for your bike or your model year, send us your registration details and we will help you check before you order. Technical specifications Brand: Sprint Filter Part number: PM293P14 Media grade: P14 Material: dry non-woven filtering media Filtration: down to 14 microns Airflow: 1,800 l/m²/sec Servicing: dry, clean with compressed air, no oiling Country of manufacture: Italy

Read more less

Barrel Rogue for the Husqvarna Svartpilen and Vitpilen The Barrel Rogue is a slip-on built specifically for the Husqvarna Svartpilen and Vitpilen. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel Rogue Version: V1, V2 Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Husqvarna Svartpilen and Vitpilen. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Husqvarna Gen 3 125, 250 and 401 The Barrel Rogue 2.0 is a slip-on built specifically for the Husqvarna Gen 3 125, 250 and 401. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Model: 250 cc, 401 cc, 125 cc Color: Black, Steel Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Husqvarna Gen 3 125, 250 and 401. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The 66bhp Venta is an ultra premium floating front rotor for the KTM Duke 390, for riders who want a measurable gain in braking feel without a workshop visit. It installs in place of the original disc with no cutting, drilling or alteration.The rotor pairs a lightweight aluminium inner carrier with a high carbon stainless steel outer ring, joined by floating bobbins. That floating construction lets the braking surface move laterally against the carrier by a small controlled amount, which is what gives the lever its more progressive, better resolved feel. The petal profile and large ventilation cuts move heat out during repeated braking, so the bite point stays where you left it on a hard road ride or a track session.Key features 5.0mm high carbon stainless steel outer ring for a consistent, heat resistant braking surface Aluminium inner carrier, reducing rotating mass against a solid disc Floating bobbin system for progressive lever feel High ventilation petal profile for heat management under repeated braking Direct replacement for the original disc, no modification required FitmentThis rotor is listed for the KTM Duke 390, 2017 to 2023. 66BHP specifies the same 5.0mm Venta disc for the RC 390, and also for the Bajaj Dominar 400 UG and the Husqvarna Svartpilen 250 and Vitpilen 250. Some applications need a spacer or bolt kit. If you ride one of these, get in touch before ordering and we will help you confirm the right combination for your bike.

Read more less

The BMC FM995/04 is a washable, reusable panel filter for the KTM 125 to 390 platform and its Husqvarna siblings. It replaces the paper element inside the stock airbox with no modification. Oiled cotton gauze, full moulded in a single piece with no welded joints, filtering down to 7 microns. This is the road-spec filter, balancing airflow against filtration for street and touring use. The FM995/04RACE is the higher-flow track version. Supplied pre-oiled and ready to fit. Fitment KTM 125 Duke (2017 to 2023) 200 Duke (2017 to 2024) 250 Duke (2017 to 2023) 390 Duke (2017 to 2023) 125 RC (2022 to 2024) 200 RC (2022 to 2024) 390 RC (2022 to 2024) 250 Adventure (2021 to 2024) 390 Adventure (2020 to 2024) Husqvarna Svartpilen 200 (2020 to 2023) Vitpilen 401 and 401 Aero (2018 to 2023) Husqvarna 125 and 250, India market The Svartpilen 125, Svartpilen 250 and Vitpilen 250 are built on the same KTM 125 and 250 Duke platform listed above and share its airbox, so this filter is the correct part for them. BMC lists the KTM source model rather than these India-market Husqvarnas, so treat it as fitment guidance. Send us your registration number and we will confirm. Specification Type: flat panel, direct replacement for the OEM element Dimensions: 128mm x 149mm Media: oiled cotton gauze with epoxy-coated alloy mesh Filtration: down to 7 microns Service: washable and re-oilable, supplied pre-oiled Warranty: 2 years limited

Read more less

NGage BNL8RTII-9 Double Iridium Spark Plug for BMW, KTM, Husqvarna & TVS Motorcycles (BS4 / BS6 Compatible) The NGage BNL8RTII-9 Double Iridium Spark Plug is a model-specific replacement spark plug designed for modern BMW, KTM, Husqvarna, and TVS motorcycles. This BMW motorcycle spark plug by NGage is manufactured in Japan and is listed by NGage for both BS4 and BS6 compliant motorcycles. The BNL8RTII-9 Double Iridium Spark Plug is intended as a direct replacement for motorcycles listed in the official NGage compatibility chart. It is engineered to match the ignition system requirements defined for each approved model. This listing applies only to part number BNL8RTII-9 and does not include alternate heat ranges or variants. Double Iridium Construction The NGage BNL8RTII-9 Spark Plug uses iridium on both the center electrode and the ground electrode. NGage classifies this as Double Iridium construction. Iridium is selected in spark plug manufacturing for its high melting point and resistance to erosion during repeated ignition cycles. In high-compression and fuel-injected engines, electrode durability is required for maintaining consistent spark formation. The double iridium layout is commonly used in tightly controlled combustion systems. NGage does not publish electrode dimensions, gap data, or service interval claims for this part number. The classification here follows NGage’s official product definition. Application Across Multiple Motorcycle Platforms The NGage BNL8RTII-9 Double Iridium Spark Plug is specified for use across several engine platforms. Despite differences in displacement and cylinder setup, the motorcycles listed below share ignition requirements compatible with BNL8RTII-9. This spark plug is approved by NGage for selected BMW 310, BMW 900, BMW 1000, KTM 250, Husqvarna 250, and TVS 310 platforms. Compatibility must always be confirmed before installation. BMW Motorcycle Spark Plug Compatibility As per NGage’s official application chart, the BMW motorcycle spark plug BNL8RTII-9 is listed for these BMW motorcycles: BMW G 310 RRBMW G 310 GSBMW G 310 RBMW S 1000 RRBMW S 1000 XRBMW S 1000 RBMW R 12BMW R 12 9TBMW R 1200 GSBMW R 1300 GSBMW F 900 GS AdventureBMW F 900 GS These models cover multiple engine families. NGage specifies the same part number for all motorcycles listed above. KTM, Husqvarna and TVS Compatibility The NGage BNL8RTII-9 Double Iridium Spark Plug is also listed for: KTM 250 Duke (Gen 3)Husqvarna 250 (2025 models)TVS 310 RR These motorcycles use modern fuel-injected engines with updated ignition systems. NGage confirms compatibility through its part-number chart. BS4 and BS6 Compatibility NGage states that the BNL8RTII-9 Spark Plug is compatible with both BS4 and BS6 motorcycles. This allows the same spark plug part number to be used across pre-BS6 and post-BS6 production years, provided the motorcycle appears in the compatibility listing. No claims are made about fuel efficiency, emission improvement, or power gains. This spark plug is supplied as a specification-matched replacement component. Manufacturing Origin The NGage BNL8RTII-9 Double Iridium Spark Plug is made in Japan. This detail appears on NGage packaging. No additional manufacturing certifications are published for this part number. Intended Use This NGage spark plug is intended for scheduled maintenance replacement. Install it per the motorcycle manufacturer’s recommended service intervals. It suits normal road use on approved motorcycles. The BNL8RTII-9 is not a racing-only or tuning component. It is supplied as a standard replacement spark plug where NGage’s compatibility chart specifies this part number. Installation Guidelines for BMW Motorcycle Spark Plug Install the NGage BNL8RTII-9 Spark Plug only on BMW motorcycles listed in the compatibility section. Installation should be performed on a cold engine. Torque specifications must follow the motorcycle manufacturer’s service manual. Incorrect spark plug selection can impact engine performance and reliability. Buyers must confirm compatibility before purchase. What This Listing Includes 1 × NGage BNL8RTII-9 Double Iridium Spark Plug No alternate heat range or additional components are included. Frequently Asked Questions Specifications Brand: NGagePart Number: BNL8RTII-9Spark Plug Type: Double IridiumCompatibility: BMW, KTM, Husqvarna, TVS (as listed above)Emission Compatibility: BS4 & BS6Country of Manufacture: JapanApplication: Motorcycle spark plug replacement As a final note, this BMW motorcycle spark plug is a reliable choice for replacement where the NGage chart confirms compatibility. Ensure proper installation and maintenance to keep your engine running smoothly with this BMW motorcycle spark plug.

Read more less