Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Workshop-grade regeneration fluid — for garages, dealers, and serious enthusiasts.
The BMC Regeneration Fluid 1 Litre (WAFLU1LT) is the bulk format of BMC's official filter re-oiling solution — same formulation as the WAFLU250, four times the volume. Ideal for motorcycle workshops, dealerships, or riders who run multiple BMC-filtered bikes and want a long-lasting supply of the correct re-oiling fluid on hand.
One litre is sufficient for approximately 15–20 full filter re-oil cycles, depending on filter size.
Specifications:
Volume: 1000ml (1 litre)
Part No: WAFLU1LT
Compatible with all BMC cotton gauze air filters — motorcycle and car
Genuine BMC product. MRP inclusive of 18% GST.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Your BMC filter is a lifetime investment. This is how you maintain it.
The BMC Regeneration Fluid (WAFLU250) is BMC's official filter re-oiling solution — the final step in the BMC filter cleaning and maintenance process. After washing your BMC cotton gauze filter with the BMC detergent, this fluid is applied to re-saturate the cotton gauze with the correct oil weight and viscosity, restoring the filter's ability to trap fine particles while maintaining maximum airflow.
Using the correct BMC regeneration fluid is critical — incorrect oils (including automotive engine oil or generic filter oils) can damage the cotton gauze, block airflow, or void the filter's performance. This is the right product, in the right formulation, for every BMC filter.
How to use:
Wash the filter with BMC Filter Detergent (WADET500) — remove all dirt and old oil
Allow the filter to dry completely — do not use heat or compressed air
Apply BMC Regeneration Fluid evenly across the cotton gauze pleats
Allow to absorb for 20 minutes before reinstalling
Specifications:
Volume: 250ml
Type: Liquid (pour/brush application)
Part No: WAFLU250
Compatible with all BMC cotton gauze air filters — motorcycle and car
For aerosol application, see WAFLU200 (200ml aerosol). For bulk/workshop use, see WAFLU1LT (1 litre).
Genuine BMC product. MRP inclusive of 18% GST.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Same BMC regeneration formula — in an easy aerosol spray.
The BMC Regeneration Fluid Aerosol (WAFLU200) is the spray-can version of BMC's official filter re-oiling solution. Identical formulation to the WAFLU250 liquid — same oil weight, same viscosity, same compatibility with all BMC cotton gauze filters — but delivered via aerosol for easier, more even application across the pleats without brush marks or pooling.
The aerosol format is particularly convenient for motorcycle filters with tighter pleat spacing, and for anyone who prefers spray application over liquid pour-and-brush.
How to use:
Wash the filter with BMC Filter Detergent — remove all dirt and old oil
Allow to dry completely — no heat, no compressed air
Spray BMC Regeneration Fluid evenly across the cotton gauze from both sides
Allow 20 minutes to absorb before reinstalling
Specifications:
Volume: 200ml aerosol
Part No: WAFLU200
Compatible with all BMC cotton gauze air filters — motorcycle and car
For liquid application, see WAFLU250 (250ml). For 1-litre bulk, see WAFLU1LT. For complete kits, see WA250-500 and WA200-500.
Genuine BMC product. MRP inclusive of 18% GST.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
A cold air intake built specifically for the Jimny 5-Door — not a universal kit, not a compromise.
The BMC Special Cold Air Intake Kit (ACOTASP-33) is a vehicle-specific cold air intake system engineered exclusively for the Maruti Suzuki Jimny 5-Door (2023 onwards, 1.5 petrol). Unlike universal intake kits that require fabrication and fitment work, this is a purpose-built kit designed to work with the Jimny's specific engine bay layout and airflow routing — delivering maximum cold air intake performance with a clean, OEM-quality installation.
The kit combines BMC's oval trumpet airbox technology with Jimny-specific mounting and routing hardware — a direct bolt-on that draws cool ambient air from outside the engine bay, completely bypassing the hot air that accumulates under the bonnet.
Why this over a universal kit:
Jimny-specific engineering: Designed around the 5-Door's engine bay — no fabrication, no compromise on fitment
Cold air sourcing: Routes intake from outside the engine bay — cooler, denser charge vs. OEM hot-air intake
BMC oval trumpet filter element: Maximum filter surface area, washable and reusable
Clean installation: Looks and fits like it belongs — no improvised mounting
Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd
MRP inclusive of 18% GST
Compatible Vehicles:
Maruti Suzuki Jimny 5-Door (2023 onwards) – 1.5 Petrol
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Universal BMC pod filter for car intake systems — large diameter range (80–110mm).
The BMC Universal Car Pod Filters — FBSA Large Series cover inlet diameters from 80mm to 110mm — the range used by larger displacement engines, V6 applications, turbo diesel intakes, and high-performance aftermarket intake fabrications. Built with the same multi-layered oiled cotton gauze as all BMC filters, they combine maximum airflow with genuine fine-particle filtration.
How to read the part number: FBSA = angled inlet | inlet diameter | filter body length. Example: FBSA80-140 = 80mm angled inlet, 140mm filter body.
Available sizes in this range:
FBSA80-140 — 80mm angled inlet / 140mm body — ₹5,499
FBSA90-110 — 90mm angled inlet / 110mm body — ₹5,499
FBSA90-140 — 90mm angled inlet / 140mm body — ₹5,699
FBSA100-110 — 100mm angled inlet / 110mm body — ₹5,699
FBSA100-140 — 100mm angled inlet / 140mm body — ₹5,699
FBSA110-110 — 110mm angled inlet / 110mm body — ₹5,699
FBSA110-140 — 110mm angled inlet / 140mm body — ₹5,699
Common applications:
V6, V8, and large displacement turbodiesel custom intake builds
Replacement filters for existing aftermarket cold air intake kits using 80–110mm couplers
High-performance intake fabrications requiring larger filter body volume
Performance workshop intake builds for SUVs and larger sedans
Key benefits:
BMC cotton gauze: Multi-layered oiled gauze — maximum airflow with genuine filtration
Washable and reusable: Lifetime filter with BMC detergent and regeneration fluid
Angled inlet (FBSA): Allows tight routing in engine bays with space constraints
Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd
MRP inclusive of 18% GST
For 60–76mm inlet diameters, see the FBSA/FBSS Small Series. For twin-inlet applications, see the FBTW Twin Air Series.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Universal BMC pod filter for car intake systems — small diameter range (60–76mm).
The BMC Universal Car Pod Filters — FBSS/FBSA Small Series are direct induction pod filters for car aftermarket intake systems, custom intake builds, and any application where an inlet diameter between 60mm and 76mm is required. Built with BMC's multi-layered oiled cotton gauze, they deliver genuine high-flow filtration — not just an open foam element.
Used extensively in custom cold air intake builds, performance intake fabrications, and as replacements for worn or damaged pod filters on aftermarket intake kits already installed on vehicles.
How to read the part number: FBSA/FBSS = filter type (straight/angled inlet) | inlet diameter | filter body length. Example: FBSA60-128 = angled, 60mm inlet, 128mm body.
Available sizes in this range:
FBSS60-85 — 60mm straight inlet / 85mm body — ₹5,299
FBSA60-128 — 60mm angled inlet / 128mm body — ₹5,499
FBSS60-150 — 60mm straight inlet / 150mm body — ₹5,299
FBSA60-140 — 60mm angled inlet / 140mm body — ₹5,499
FBSA60-150 — 60mm angled inlet / 150mm body — ₹5,499
FBSA65-150 — 65mm angled inlet / 150mm body — ₹5,499
FBSA65-128 — 65mm angled inlet / 128mm body — ₹5,499
FBSS70-150 — 70mm straight inlet / 150mm body — ₹5,299
FBSA70-150 — 70mm angled inlet / 150mm body — ₹5,499
FBSA70-140 — 70mm angled inlet / 140mm body — ₹5,499
FBSA76-110 — 76mm angled inlet / 110mm body — ₹5,299
FBSA76-140 — 76mm angled inlet / 140mm body — ₹5,499
Key benefits:
BMC cotton gauze construction: Multi-layered oiled gauze — genuine filtration with high airflow
Washable and reusable: Lifetime filter — clean with BMC detergent kit and re-oil
Angled and straight inlet options: FBSA = angled (better for tight engine bay routing), FBSS = straight
Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd
MRP inclusive of 18% GST
For 80mm–110mm inlet diameters, see the FBSA Large Series. For twin-inlet applications, see the FBTW Twin Air Series.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
A BMC pod filter for every intake diameter — purpose-built for motorcycles.
The BMC Universal Intake System Air Filters (FMSA series) are conical and oval pod filters designed for motorcycle custom intake setups, carburettor conversions, velocity stack applications, and aftermarket intake systems where a vehicle-specific filter doesn't exist. Built with BMC's multi-layered oiled cotton gauze, they deliver maximum airflow with genuine filtration — not a compromise between the two.
These are the same cotton gauze media used in BMC's direct-fit motorcycle filters — now in universal sizes to fit virtually any motorcycle intake diameter.
Available sizes — choose your specification:
FMSA28-60 — 28mm inlet / 60mm body — ₹3,399 — Intake system filter, small displacement carb applications
FMSA41-60 — 41mm inlet / 60mm body — ₹4,999 — Mid-sized intake, single carb and throttle body use
FMSA49-75 — 49mm inlet / 75mm body — ₹3,999 — Conical filter, mid-range intake diameters
FMSA50-66O — 50mm inlet / 66mm oval body — ₹4,999 — Oval conical filter, space-constrained installations
FMSA50-85 — 50mm inlet / 85mm body — ₹5,299 — High-flow intake, larger displacement singles and twins
FMSA53-85 — 53mm inlet / 85mm body — ₹5,299 — Conical high-flow, 53mm throttle body and carb applications
Common applications:
Custom café racer and scrambler builds with exposed velocity stacks
Carburettor-converted motorcycles requiring a pod filter
Aftermarket intake systems without a vehicle-specific BMC filter
Vintage and classic motorcycle restorations
High-performance single-carb and throttle body setups
Why BMC over generic pod filters:
Genuine filtration: Multi-layered cotton gauze — not just a foam sock that lets everything through
Washable and reusable: Clean with BMC detergent, re-oil, reinstall — lifetime use
BMC cotton gauze construction: Same media as direct-fit fitment filters — no compromise
Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd
MRP inclusive of 18% GST
Not sure which size fits your application? Use your throttle body or carburettor inlet diameter as the guide — match it to the inlet (first number) of the FMSA code.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Double the inlet. Double the flow. For intakes that demand more.
The BMC Twin Air Universal Pod Filters (FBTW Series) are dual-inlet pod filters designed for high-performance intake applications where a single inlet isn't enough — twin-throttle body setups, dual-inlet cold air intake systems, forced induction applications, and custom fabrications on turbocharged or supercharged engines. Each filter has two inlet ports feeding a single filter body, dramatically increasing the total airflow capacity over any equivalent single-inlet filter.
Built with BMC's multi-layered oiled cotton gauze — the same proven media used across the entire BMC range — they deliver unrestricted airflow without sacrificing filtration.
Available sizes — FBTW (Twin Air, P = paired inlet):
FBTW60-150P — 60mm twin inlet / 150mm body — ₹6,499
FBTW60-140P — 60mm twin inlet / 140mm body — ₹6,799
FBTW63-140P — 63mm twin inlet / 140mm body — ₹6,799
FBTW65-150P — 65mm twin inlet / 150mm body — ₹6,499
FBTW70-140P — 70mm twin inlet / 140mm body — ₹6,799
FBTW70-150P — 70mm twin inlet / 150mm body — ₹6,499
FBTW76-140P — 76mm twin inlet / 140mm body — ₹6,799
FBTW80-140P — 80mm twin inlet / 140mm body — ₹6,799
FBTW90-140P — 90mm twin inlet / 140mm body — ₹6,999
FBTW100-140P — 100mm twin inlet / 140mm body — ₹6,999
FBTW110-140P — 110mm twin inlet / 140mm body — ₹6,999
Common applications:
Twin-throttle body motorcycle and car setups
Turbocharged and supercharged engine custom intakes
High-output aftermarket intake fabrications requiring maximum airflow volume
Performance workshop builds for track and competition use
Key benefits:
Dual inlet design: Two feed points dramatically increase total airflow volume over single-inlet equivalents
BMC cotton gauze: Multi-layered oiled gauze — genuine filtration with no flow restriction
Washable and reusable: Lifetime filter — service with BMC cleaning kit
Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd
MRP inclusive of 18% GST
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series E90 LCI to E90 M3 Body KitThis BMW 3 Series E90 LCI to M3 conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M3 look.Compatible Vehicle(s)BMW 3 Series E90 LCISpecifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Fitment Type: Model Specific
Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series F30 (2011-2018) to M2 CS Body KitThis BMW 3 Series F30 to M2 CS-style conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive look.Compatible Vehicle(s)BMW 3 Series F30 (2011-2018)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Fitment Type: Model Specific
Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series F30 M Sport Body KitThis BMW 3 Series F30 M Sport body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M Sport look.Compatible Vehicle(s)BMW 3 Series F30Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Fitment Type: Model Specific
Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series F30 M3-Look Conversion Body KitThis BMW 3 Series F30 M3-look conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M3 look.Compatible Vehicle(s)BMW 3 Series F30Specifications
Kit Type: Full Body Kit (M3 look)
Material: ABS Plastic
Vehicle Brand: BMW
Color: Unpainted
Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series F30 Upgrade to G80 M3 LCI Body KitThis BMW 3 Series F30 to G80 M3 conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M3 look.Compatible Vehicle(s)BMW 3 Series F30 (converts to G80 M3 LCI look)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Fitment Type: Model Specific
Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series F30/F35 Upgrade to G20/G28 LCI Body KitThis BMW 3 Series F30/F35 to G20/G28 LCI conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to modernise your BMW's look.Compatible Vehicle(s)BMW 3 Series F30 / F35 (converts to G20 / G28 LCI look)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Color: Unpainted
Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 3 Series F34 GT to M3 Body KitThis BMW 3 Series F34 GT to M3 conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M3 look.Compatible Vehicle(s)BMW 3 Series F34 GT (2013+)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Fitment Type: Model Specific
Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 5 Series F10 (2012-2017) to F10 M5 Body KitThis BMW 5 Series F10 to M5 conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M5 look.Compatible Vehicle(s)BMW 5 Series F10 (2012-2017)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Color: Unpainted
Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 5 Series F10 to F10 M-Sport Body Kit (2010-2013)This BMW 5 Series F10 M-Sport conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your BMW an aggressive M-Sport look.Compatible Vehicle(s)BMW 5 Series F10 (2010-2013)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Fitment Type: Model Specific
Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW 5 Series F10(12-17) to 2024 BMW G60/G68 M Sport Body KitThe BMW 5 Series F10(12-17) to 2024 BMW G60/G68 M Sport Body Kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your car an aggressive, sporty look.Compatible Vehicle(s)BMW 5 Series F10(12-17) to 2024 BMW G60/G68 M Sport Body KitSpecifications
Vehicle Model: BMW 5 Series F10(12-17) to 2024 BMW G60/G68 M Sport Body Kit
Material: ABS Plastic
Usage/Application: Garage
Color: Black
Country of Origin: Made in India
Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW F10 to G30 Conversion Body KitThis BMW 5 Series F10 to G30 conversion body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to modernise your BMW's look.Compatible Vehicle(s)BMW 5 Series F10 (converts to G30 look)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Brand: BMW
Finish: Unpainted
Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
BMW X3(F25) Upgrade to BMW X3M(F97 LCI) 2023 Body KitThe BMW X3(F25) Upgrade to BMW X3M(F97 LCI) 2023 Body Kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit to give your car an aggressive, sporty look.Compatible Vehicle(s)BMW X3 (F25 to F97 X3M LCI)Specifications
Kit Type: Full Body Kit
Material: ABS Plastic
Vehicle Model: BMW X3
Color: Unpainted
Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.
1-3 weeks
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Brembo replacement brake discs are precision-engineered rotors for reliable, fade-free stopping.Fitment guidance. Discs matched to the Abarth below. Please confirm your exact variant, engine and year before ordering — our team is glad to help.Abarth 595Buying options. Choose the Front axle, the Rear axle, or the complete Front + Rear Set.
1-3 weeks
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Brembo replacement brake discs are precision-engineered rotors for reliable, fade-free stopping.Fitment guidance. Discs matched to the vehicles below. Please confirm your exact variant, engine and year before ordering — our team is glad to help.
BMW 850i
Rolls Royce Cullinan 2018 onwards/Phantom 8
Buying options. Choose the Front axle, the Rear axle, or the complete Front + Rear Set.
1-3 weeks
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Brembo replacement brake discs are precision-engineered rotors for reliable, fade-free stopping.Fitment guidance. Discs matched to the BMW below. Please confirm your exact variant, engine and year before ordering — our team is glad to help.BMW 3 SERIES G20 320DBuying options. Choose the Front axle, the Rear axle, or the complete Front + Rear Set.
1-3 weeks
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Brembo replacement brake discs are precision-engineered rotors for reliable, fade-free stopping.Fitment guidance. Discs matched to the BMW below. Please confirm your exact variant, engine and year before ordering — our team is glad to help.BMW 5 SERIES E60 (2003- 2010)Buying options. Choose the Front axle, the Rear axle, or the complete Front + Rear Set.
No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000No Cost EMI0% interest for 3 months on orders over ₹10,000
