Silver Stallion Performance (SSP) Exhausts

Shorty design. The Silver Stallion SHORTY is a slip-on exhaust for the Royal Enfield Hunter 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.75 BHP and +3 Nm over the stock system while weighing 2.1 kg. The internals of a full sized exhaust: large core, direct air flow, low back pressure. What changes on the bike +1.75 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.1 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SHORTY Type Slip-On Exhaust Fits Hunter 350 Power gain +1.75 BHP over stock Torque gain +3 Nm over stock Weight 2.1 kg Finishes Silver, Black Matte, Brushed, Dual Tone Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Hunter 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SHORTY fit?It is made for the Royal Enfield Hunter 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.75 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed, Dual Tone. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Hunter 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Plug and play fitment. The Silver Stallion GOAN is a slip-on exhaust for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.7 BHP and +3 Nm over the stock system while weighing 2.5 kg. No mid-pipe required. A cafe racer silhouette with a coastal tune. What changes on the bike +1.7 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion GOAN Type Slip-On Exhaust Fits Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series) Power gain +1.7 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Goan Classic 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion GOAN fit?It is made for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.7 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Goan Classic 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Performance balance. The Silver Stallion SPORTY is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 2.5 kg. Excellent power delivery and throttle response, especially at lower RPM. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Aerodynamic efficiency. The Silver Stallion OUTLANDER is a slip-on exhaust for the Royal Enfield Bear 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2.5 BHP and +4.9 Nm over the stock system while weighing 3.5 kg with mid-pipe. A cylindrical body with low drag and high thermal durability. What changes on the bike +2.5 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 3.5 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion OUTLANDER Type Slip-On Exhaust Fits Bear 650 Power gain +2.5 BHP over stock Torque gain +4.9 Nm over stock Weight 3.5 kg with mid-pipe Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Bear 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion OUTLANDER fit?It is made for the Royal Enfield Bear 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2.5 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3.5 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bear 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Custom look, classic style. The Silver Stallion ROADKING is a slip-on exhaust for the Royal Enfield Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +3.5 Nm over the stock system while weighing 6 kg. More power at higher RPM, a throatier note and better heat dispersion. What changes on the bike +2 BHP and +3.5 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion ROADKING Type Slip-On Exhaust Fits Shotgun 650 Power gain +2 BHP over stock Torque gain +3.5 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Shotgun 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion ROADKING fit?It is made for the Royal Enfield Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +3.5 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Shotgun 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Sustained Acoustic Performance. The Silver Stallion LONGSHOT is a slip-on exhaust for the Royal Enfield Super Meteor 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 6 kg. No power loss, degradation or deformity, with even heat dissipation. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion LONGSHOT Type Slip-On Exhaust Fits Super Meteor 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Super Meteor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion LONGSHOT fit?It is made for the Royal Enfield Super Meteor 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Super Meteor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Cruiser Vibe. The Silver Stallion CRUISER is a slip-on exhaust for the Royal Enfield Classic 650, Super Meteor 650 and Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 6 kg. Tuned for cruising, with a deep bassy note. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CRUISER Type Slip-On Exhaust Fits Classic 650, Super Meteor 650 and Shotgun 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CRUISER fit?It is made for the Royal Enfield Classic 650, Super Meteor 650 and Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Built for the Twin. Tuned for the Win. The Silver Stallion TWINS is a slip-on exhaust for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 5 kg. Class leading at 5 kg, a bassy note, and ECU compatible. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion TWINS Type Slip-On Exhaust Fits Interceptor 650 and Continental GT 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 5 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion TWINS fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Interceptor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion CROSS COUNTRY FULL SYSTEM is a full system exhaust for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 6 kg. Slip-ons plus competition headers, a signature growl and track-inspired tuning. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 6 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion CROSS COUNTRY FULL SYSTEM Type Full System Exhaust Fits Himalayan 450 and Guerrilla 450 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 6 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion CROSS COUNTRY FULL SYSTEM fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 450. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion TWINS FULL SYSTEM is a full system exhaust for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 12 kg. Slip-ons plus competition headers, a signature growl and track-inspired tuning. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 12 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion TWINS FULL SYSTEM Type Full System Exhaust Fits Interceptor 650 and Continental GT 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 12 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion TWINS FULL SYSTEM fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?12 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Interceptor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less