Audi

Brembo P85078 is a front-axle brake pad set from Brembo's Prime range for the Audi & Lamborghini, measuring 97 mm wide, 74 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 97 mm Height 74 mm Thickness 17 mm Braking system Brembo WVA number 23764,23751,23765 FMSI D1029 7934 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Electric sensor contact on the pad Approval ECE R90 type-approved EAN code 8020584058817 These pads are built for an electric wear sensor. The sensor itself is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Audi & Lamborghini. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P85065 is a front-axle brake pad set from Brembo's Prime range for the Porsche & Audi, measuring 190 mm wide, 106 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 190 mm Height 106 mm Thickness 17 mm Braking system Brembo WVA number 23693 FMSI D1014 8366, D977 7878 Backplate Black, painted Accessories Anti-squeal shim, counterweights Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584058688 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Porsche & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P65057 is a front-axle brake pad set from Brembo's Prime range for the Porsche, Audi & Lamborghini.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Backplate Black, painted Approval ECE R90 type-approved EAN code 8020584129418 Brembo notes: not for carbon-ceramic brake discs.Fitment guidanceListed against the Porsche, Audi & Lamborghini. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P65016 is a front-axle brake pad set from Brembo's Prime range for the Audi & Lamborghini.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front FMSI D1130 8241 Backplate Black, painted Approval ECE R90 type-approved EAN code 8020584061879 Brembo notes: not for carbon-ceramic brake discs.Fitment guidanceListed against the Audi & Lamborghini. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P50127 is a front-axle brake pad set from Brembo's Prime range for the Mercedes & Audi, measuring 190 mm wide, 93 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 190 mm Height 93 mm Thickness 17 mm Braking system Brembo WVA number 24455 FMSI D1291 8408, D1291 8478 Backplate Black, painted Accessories Anti-squeal shim, counterweights Wear indicator Electric sensor contact on the pad Approval ECE R90 type-approved EAN code 8020584112601 These pads are built for an electric wear sensor. The sensor itself is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo 08A2021X is a rear-axle brake disc for the Skoda, VW & Audi, measuring 282 mm diameter and 12 mm thick.Brembo Xtra is Brembo's sport disc line. The braking surface is cross-drilled to clear heat, gas and water faster and give a sharper bite, and it is designed to run with Brembo Xtra pads.Specification Diameter 282 mm Thickness 12 mm Minimum thickness 10.5 mm Height 48 mm Bolt holes 5 Centering bore 65 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584212325 New thickness is 12 mm and the manufacturer's minimum is 10.5 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Skoda, VW & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09B0391X is a front-axle brake disc for the Audi Q5 (2010 to 2013) 3.0 TDI 345mm, measuring 345 mm diameter and 29.5 mm thick.Brembo Xtra is Brembo's sport disc line. The braking surface is cross-drilled to clear heat, gas and water faster and give a sharper bite, and it is designed to run with Brembo Xtra pads.Specification Diameter 345 mm Thickness 29.5 mm Minimum thickness 28.2 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584217634 New thickness is 29.5 mm and the manufacturer's minimum is 28.2 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi Q5 (2010 to 2013) 3.0 TDI 345mm. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09A8201X is a front-axle brake disc for the Audi A4 (2008 to 2016), A5 (2007 to present), measuring 314 mm diameter and 25 mm thick.Brembo Xtra is Brembo's sport disc line. The braking surface is cross-drilled to clear heat, gas and water faster and give a sharper bite, and it is designed to run with Brembo Xtra pads.Specification Diameter 314 mm Thickness 25 mm Minimum thickness 23.5 mm Height 52 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584212738 New thickness is 25 mm and the manufacturer's minimum is 23.5 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi A4 (2008 to 2016), A5 (2007 to present). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 0997721X is a front-axle brake disc for the Skoda, VW & Audi, measuring 312 mm diameter and 25 mm thick.Brembo Xtra is Brembo's sport disc line. The braking surface is cross-drilled to clear heat, gas and water faster and give a sharper bite, and it is designed to run with Brembo Xtra pads.Specification Diameter 312 mm Thickness 25 mm Minimum thickness 22.8 mm Height 50 mm Bolt holes 5 Centering bore 65 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584212677 New thickness is 25 mm and the manufacturer's minimum is 22.8 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Skoda, VW & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D48233 is a rear-axle brake disc for the Audi RS7/RS6 4ka model 420MM, RSQ8, measuring 370 mm diameter and 30 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 370 mm Thickness 30 mm Minimum thickness 28 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Rear Units per box 2 (left + right) EAN code 8020584316948 New thickness is 30 mm and the manufacturer's minimum is 28 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi RS7/RS6 4ka model 420MM, RSQ8. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D42411 is a rear-axle brake disc for the Audi Q7 4M, Q8, measuring 350 mm diameter and 28 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 350 mm Thickness 28 mm Minimum thickness 26 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Rear Units per box 2 (left + right) EAN code 8020584237564 New thickness is 28 mm and the manufacturer's minimum is 26 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi Q7 4M, Q8. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09C88411 is a rear-axle brake disc for the Porsche & Audi, measuring 330 mm diameter and 28 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 330 mm Thickness 28 mm Minimum thickness 26 mm Height 74 mm Bolt holes 5 Centering bore 85 mm Disc type Ventilated Axle Rear Units per box 2 (left + right) EAN code 8020584225776 New thickness is 28 mm and the manufacturer's minimum is 26 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09C17011 is a rear-axle brake disc for the Audi S6 rear disc, measuring 356 mm diameter and 22 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 356 mm Thickness 22 mm Minimum thickness 20 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Rear Units per box 2 (left + right) EAN code 8020584225530 New thickness is 22 mm and the manufacturer's minimum is 20 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi S6 rear disc. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09B96911 is a rear-axle brake disc for the Porsche & Audi, measuring 330 mm diameter and 22 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 330 mm Thickness 22 mm Minimum thickness 20 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Rear Units per box 2 (left + right) EAN code 8020584218396 New thickness is 22 mm and the manufacturer's minimum is 20 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09A20011 is a rear-axle brake disc for the Audi & Skoda, measuring 310 mm diameter and 22 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 310 mm Thickness 22 mm Minimum thickness 20 mm Height 48 mm Bolt holes 5 Centering bore 65 mm Disc type Ventilated Axle Front and rear Units per box 2 (left + right) EAN code 8020584025598 New thickness is 22 mm and the manufacturer's minimum is 20 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi & Skoda. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09987111 is a rear-axle brake disc for the Audi Q7 4.2 Tdi and v8 petrol 2006-15, measuring 358 mm diameter and 28 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 358 mm Thickness 28 mm Minimum thickness 26 mm Height 74 mm Bolt holes 5 Centering bore 85 mm Disc type Ventilated Axle Rear Units per box 2 (left + right) EAN code 8020584987117 New thickness is 28 mm and the manufacturer's minimum is 26 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi Q7 4.2 Tdi and v8 petrol 2006-15. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 08D06011 is a rear-axle brake disc for the Audi A4 8W 1.4 petrol new model, A4 2016 onwards 8W diesel, measuring 300 mm diameter and 12 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 300 mm Thickness 12 mm Minimum thickness 10 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584233993 New thickness is 12 mm and the manufacturer's minimum is 10 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi A4 8W 1.4 petrol new model, A4 2016 onwards 8W diesel. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 08C50111 is a rear-axle brake disc for the Audi, Skoda & VW, measuring 300 mm diameter and 12 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 300 mm Thickness 12 mm Minimum thickness 10 mm Height 48 mm Bolt holes 5 Centering bore 65 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584222485 New thickness is 12 mm and the manufacturer's minimum is 10 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi, Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 08B41311 is a rear-axle brake disc for the Audi, Skoda & VW, measuring 272 mm diameter and 10 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 272 mm Thickness 10 mm Minimum thickness 8 mm Height 48 mm Bolt holes 5 Centering bore 65 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584031483 New thickness is 10 mm and the manufacturer's minimum is 8 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi, Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 08A75911 is a rear-axle brake disc for the Audi Q5 (2013 onwards) 2.0 TDI 320mm & 3 more, measuring 300 mm diameter and 12 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 300 mm Thickness 12 mm Minimum thickness 10 mm Height 36 mm Bolt holes 5 Centering bore 68 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584023600 New thickness is 12 mm and the manufacturer's minimum is 10 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi Q5 (2013 onwards) 2.0 TDI 320mm & 3 more. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 08A20211 is a rear-axle brake disc for the Audi, Skoda & VW, measuring 282 mm diameter and 12 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 282 mm Thickness 12 mm Minimum thickness 10 mm Height 48 mm Bolt holes 5 Centering bore 65 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584024812 New thickness is 12 mm and the manufacturer's minimum is 10 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi, Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 08884321 is a rear-axle brake disc for the Audi A6 (2004 - 2011), measuring 302 mm diameter and 12 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 302 mm Thickness 12 mm Minimum thickness 10 mm Height 49 mm Bolt holes 5 Centering bore 68 mm Disc type Solid Axle Rear Units per box 2 (left + right) EAN code 8020584024966 New thickness is 12 mm and the manufacturer's minimum is 10 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi A6 (2004 - 2011). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D48143 is a front-axle brake disc for the Audi RS7/RS6 4ka model 420MM, measuring 420 mm diameter and 40 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 420 mm Thickness 40 mm Minimum thickness 38 mm Height 57 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584316955 New thickness is 40 mm and the manufacturer's minimum is 38 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi RS7/RS6 4ka model 420MM. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less

Brembo 09D48133 is a front-axle brake disc for the Audi RSQ8, measuring 420 mm diameter and 40 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 420 mm Thickness 40 mm Minimum thickness 38 mm Height 52.7 mm Bolt holes 5 Centering bore 68 mm Disc type Ventilated Axle Front Units per box 2 (left + right) EAN code 8020584329962 New thickness is 40 mm and the manufacturer's minimum is 38 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Audi RSQ8. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Brembo supplies this disc as a boxed set of two, so one unit does both wheels on the axle. You do not need to order two.Specifications published by Brembo.

Read more less