Collection

ON SALE | Rawtorque

Race-grade upgrades for every bike & car

1917 Products
Genuine partsGenuine performance parts
No cost EMI0% interest, easy instalments
Partial CODAdvance + balance on delivery
Secure checkout100% safe & encrypted
1917 products

  • NGK Laser Iridium spark plug with its retail box NGK laser iridium spark plug

    NGK NGK SILZKR7C11S Laser Iridium Spark Plug for Honda Civic i-VTEC 1.8 & CR-V i-VTEC 2.0

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    NGK Laser Iridium. The plug NGK specifies for the Honda Civic i-VTEC 1.8 and the CR-V i-VTEC 2.0. The fine-wire iridium centre electrode fires a sharper, more focused spark than a conventional plug, giving a smoother idle, cleaner combustion and better cold starts, with a service life well beyond a nickel plug. Direct fit. Nothing to adjust. Find your car Honda  Takes 4 Civic i-VTEC 1.8 CR-V i-VTEC 2.0 Earlier Civic? The 1.6, 1.8i and 2.0i take the IZFR6K-11S. CR-V 2.4 or Accord? Those take the ILZKR7B-11S or IZFR6K-11. All are on our site. Specifications Part number · SILZKR7C11S Type · Laser Iridium Heat range · 7 Sold as · pack of 4 Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your model and year and we will confirm before you order.

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,980.00 Rs. 2,960.00 ↓ You save Rs. 20.00

  • Rolon chain and sprocket kit in its retail box

    Rolon Rolon Brass Chain & Sprocket Kit for TVS Apache RTR 200 4V (BPR Kit HPORC 332)

    Rolon BPR brass-plated sealed chain and sprocket kit for the TVS Apache RTR 200 4V. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HPORC-116-2 Front sprocket 13T (S 01 806), 2 holes Rear sprocket 45T (S 01 804), 4 holes Rolon kit reference HPORC 332 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

    Rs. 2,987.00 Rs. 2,970.00 ↓ You save Rs. 17.00

  • Save - Rs. 652.00 v strom vambrace bashplate V Strom Vambrace Bashplate mild steel black engine underbody guard

    Legundary V Strom Vambrace Bashplate, Legundary

    20 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    V Strom Vambrace Bashplate, Engine Protection for Suzuki V Strom The V Strom Vambrace Bashplate from Legundary is designed to provide added protection to the lower engine and underbody area of the Suzuki V Strom. Built to shield key components from road debris, uneven terrain, and unexpected surface contact, this bashplate enhances mechanical protection without compromising ground clearance or overall styling. Engine guards and bashplates play a critical role when riding through mixed terrain, speed breakers, gravel roads, or rough patches. Positioned beneath the engine, this bashplate acts as a defensive barrier against stones, debris, and underbody impact. Its compact design allows strong coverage while maintaining the motorcycle’s structural balance. Manufactured using mild steel and finished in black, the Vambrace Bashplate combines strength with durability to support both touring and everyday riding conditions. Designed for Suzuki V Strom The Vambrace Bashplate is engineered specifically for the Suzuki V Strom, ensuring: • Direct compatibility with the motorcycle’s frame• Secure mounting alignment• Protection for critical underbody engine areas• Maintained ground clearance Its model-specific design ensures proper integration without requiring structural modification. Functional Engine Protection Underbody exposure is common during: • Rough road riding• Speed breaker crossings• Gravel and uneven terrain• Off-road or adventure touring This bashplate provides a protective layer beneath the engine casing to help reduce potential impact damage. Its extended coverage design offers improved protection compared to smaller underguards. The plate is built to remain firm during riding while supporting engine protection in everyday scenarios. Mild Steel Construction & Finish Constructed from mild steel, the bashplate delivers: • Strong structural durability• Reliable impact resistance• Corrosion resistance through surface treatment• Stable underbody support The smooth black finish adds a refined look while complementing the V Strom’s rugged aesthetic. Product Specifications • Material: Mild Steel• Colour: Black• Dimensions: 36 × 24 × 12 cm (L × B × H)• Weight: 1.775 kg The balanced weight ensures effective protection without excessive additional load. Features • Designed for long-lasting durability• Provides extended engine coverage• Made of mild steel for strong protection• Smooth, refined finish• Surface-treated components for corrosion resistance This bashplate enhances underbody protection while maintaining the motorcycle’s riding dynamics.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,630.00 Rs. 2,978.00 ↓ You save Rs. 652.00

  • Save - Rs. 672.00 Legundary Back Rest with Carrier for Royal Enfield Hunter 350. Legundary Back Rest with Carrier for Royal Enfield Hunter 350.

    Legundary Legundary Back Rest with Carrier for Royal Enfield Hunter 350

    22 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Why Choose the Legundary Back Rest with Carrier for Hunter 350? The Legundary Back Rest with Carrier is designed specifically for the Royal Enfield Hunter 350, combining pillion back support with a rear luggage mounting platform in a single structure. This is a model-specific component engineered for the Hunter 350 and is not listed as universal fitment. Model-Specific Compatibility, Royal Enfield Hunter 350 Designed exclusively for Royal Enfield Hunter 350 Structured to align with factory mounting points Intended for direct installation Integrated backrest and carrier design Compatibility beyond Hunter 350 is not stated and should not be assumed. Material & Construction Constructed from Mild Steel Backrest finished with Foam and Rexine Powder-coated black finish Designed for durability and corrosion resistance Material thickness is not specified in the official listing. Dimensions & Weight Dimensions: 40 x 28 x 29 cm (L x B x H) Product Weight: 3.100 kg Color: Black Dual Function Design This unit integrates: 1️⃣ Pillion Back Support Foam-cushioned backrest Rexine covering Intended to improve pillion comfort during rides 2️⃣ Rear Carrier Platform Metal base for luggage mounting Suitable for light luggage or top box (compatibility to be verified before purchase) Load capacity is not specified in the listing and should be confirmed before heavy-duty usage. Intended Use Suitable for: Touring riders Riders carrying pillion passengers Daily commuting with luggage Mounting soft bags or top boxes Installation Designed for direct mounting on Hunter 350 Professional installation recommended for proper torque and alignment Product Specifications Brand: Legundary Product Name: Back Rest with Carrier Motorcycle Compatibility: Royal Enfield Hunter 350 Material: Mild Steel + Foam + Rexine Finish: Black Dimensions: 40 x 28 x 29 cm Weight: 3.100 kg

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,650.00 Rs. 2,978.00 ↓ You save Rs. 672.00

  • Maddog 4-Wheeler Wire Harness with Switch – Waterproof Auxiliary Light Wiring Kit for SUVs and ATVs Maddog 4-Wheeler Wire Harness with Switch – Heavy-Duty Waterproof Auxiliary Light Wiring Kit (Up to 150W) Maddog Industries

    Maddog Industries Maddog 4-Wheeler Wireharness with Switch, Car Auxiliary Light Wiring Kit

    17 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    The Maddog 4-Wheeler Wireharness brings Maddog's proven plug-and-play reliability to cars. Designed specifically for four-wheeler auxiliary light installation, this kit includes both the harness and the switch in a single bundle, so you're ready to install from the moment the box opens.Built on the same 100% pure copper, automotive-grade wiring platform as the bike harnesses, but configured for car voltage systems and mounting requirements.Kit Contents: 4-Wheeler Wireharness Switch

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,999.00 Rs. 2,979.00 ↓ You save Rs. 20.00

  • NGK Laser Iridium spark plug with its retail box NGK laser iridium spark plug

    NGK NGK ILZKR6Q11 Laser Iridium Spark Plug for Maruti Brezza / Ertiga / Grand Vitara / XL6 1.5 & Toyota Hyryder / Rumion (K15C)

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    NGK Laser Iridium. The plug NGK specifies for the 1.5 litre K15C engine shared across Maruti Suzuki and its Toyota-badged siblings. The fine-wire iridium centre electrode fires a sharper, more focused spark than a conventional plug, giving easier cold starts, a steadier idle and cleaner combustion. Iridium holds its gap far longer, so that stays true well into the service interval. Direct fit. Nothing to adjust. Find your car Maruti Suzuki 1.5 K15C  Takes 4 Brezza 1.5 Ertiga 1.5 Grand Vitara 1.5 XL6 1.5 Victoris 1.5 Toyota 1.5  Takes 4 Urban Cruiser Hyryder Rumion Specifications Part number · ILZKR6Q11 Type · Laser Iridium Heat range · 6 Engine · Maruti K15C 1.5 Sold as · pack of 4 Not the same as the older K15B. If your Ertiga, Ciaz, XL6, S-Cross or Jimny runs the earlier K15B engine, NGK lists no iridium for it. Send us your year and we will tell you what does fit. Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your model and year and we will confirm before you order.

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,000.00 Rs. 2,980.00 ↓ You save Rs. 20.00

  • NGK Laser Iridium spark plug with its retail box NGK laser iridium spark plug

    NGK NGK SILZKR7B-11 Laser Iridium Spark Plug for Hyundai Elantra 1.8 (2012 to 2016) & Tucson 2.0

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    NGK Laser Iridium. The plug NGK specifies for the Hyundai Elantra 1.8 Beta and the Tucson 2.0 Theta. The fine-wire iridium centre electrode fires a sharper, more focused spark than a conventional plug, giving a smoother idle, cleaner combustion and better cold starts, and holding its gap far longer. Direct fit. Nothing to adjust. Find your car Hyundai  Takes 4 Elantra 1.8 Beta · 2012 to 2016 Tucson 2.0 Theta Driving a 1.2 Kappa or a turbo? The 1.2 Kappa takes the LKR7BIX-P and the 1.0 and 1.4 turbo petrols the ILKR9Q7G. Both are on our site. Specifications Part number · SILZKR7B-11 Type · Laser Iridium Heat range · 7 Sold as · pack of 4 Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your model and year and we will confirm before you order.

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,000.00 Rs. 2,980.00 ↓ You save Rs. 20.00

  • Save - Rs. 662.00 Legundary Hunter Halter Saddle Stay for Royal Enfield Hunter 350. Legundary Hunter Halter Saddle Stay for Royal Enfield Hunter 350.

    Legundary Legundary Hunter Halter Saddle Stay for Royal Enfield Hunter 350

    12 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Why Choose the Legundary Halter Saddle Stay for Hunter 350? The Legundary Hunter Halter Saddle Stay is designed specifically for the Royal Enfield Hunter 350, providing side support for saddle bags to prevent inward sagging and contact with the wheel. This saddle stay is engineered for the Hunter 350 platform and is not listed as universal fitment. Model-Specific Compatibility, Royal Enfield Hunter 350 Designed exclusively for Royal Enfield Hunter 350 Structured side mounting design Direct-fit installation Engineered to align with factory mounting points Compatibility beyond Hunter 350 is not mentioned and should not be assumed. Material & Construction Constructed from Mild Steel Powder-coated finish Designed for durability and corrosion resistance Built using high-quality mild steel tubing Material thickness is not specified in the official listing. Dimensions & Weight Dimensions: 50 x 38 x 7 cm (L x B x H) Weight: 2.300 kg Color: Black Functional Design The Halter Saddle Stay is intended to: Provide side support for saddle bags Prevent luggage from sagging toward the wheel Maintain bag positioning during long rides Improve luggage stability This structure supports safe mounting of soft saddle bags. Top box compatibility is not implied. Intended Use Suitable for: Touring riders Long-distance travel Daily commuting with side luggage Riders using soft saddle bags Load capacity is not specified in the listing and should be verified before heavy-duty usage. Installation Designed for direct mounting on Hunter 350 Professional installation recommended for proper alignment and torque settings Product Specifications Brand: Legundary Product Name: Hunter Halter Saddle Stay Motorcycle Compatibility: Royal Enfield Hunter 350 Material: Mild Steel Finish: Black Dimensions: 50 x 38 x 7 cm Weight: 2.300 kg

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,650.00 Rs. 2,988.00 ↓ You save Rs. 662.00

  • Save - Rs. 662.00 Legundary (LCB) Super Meteor 650 Combat Bash Plate for Royal Enfield Super Meteor 650. Legundary (LCB) Super Meteor 650 Combat Bash Plate for Royal Enfield Super Meteor 650.

    Legundary Legundary (LCB) Super Meteor 650 Combat Bash Plate for Royal Enfield Super Meteor 650

    15 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Designed for Royal Enfield Super Meteor 650 The Legundary (LCB) Super Meteor 650 Combat Bash Plate is developed specifically for the Royal Enfield Super Meteor 650. This bash plate is designed to provide lower engine protection against road debris, uneven surfaces, and minor impacts encountered during regular riding conditions. This is not listed as a universal fitment product. Model Compatibility Compatible with: Royal Enfield Super Meteor 650 Direct fitment as per manufacturer design No cross-model compatibility claimed Material & Finish Material: Aluminium Color: Silver Aluminium construction offers a balance of strength and weight efficiency. Dimensions & Weight Dimensions: 49 x 22 x 19 cm (L x B x H) Weight: 0.966 kg Functional Purpose The Combat Bash Plate is intended to: Provide protective coverage for the lower engine area Reduce exposure to stones, debris, and uneven surfaces Add structural underbody protection Integrate with the motorcycle’s lower chassis profile This product is not described as impact-proof or crash-rated for high-speed collisions. Installation Direct mounting design Engineered specifically for Super Meteor 650 Professional installation recommended for correct alignment and torque Product Specifications Brand: Legundary (LCB) Product Name: Super Meteor 650 Combat Bash Plate Motorcycle Compatibility: Royal Enfield Super Meteor 650 Material: Aluminium Finish: Silver Dimensions: 49 x 22 x 19 cm Weight: 0.966 kg

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,650.00 Rs. 2,988.00 ↓ You save Rs. 662.00

  • Save - Rs. 852.00 Legundary Triumph Scrambler 400 X Vector Radiator Grill Silver aluminium front guard installed Legundary Triumph Scrambler 400 X Vector Radiator Grill Silver – Aluminium – view 2

    Legundary Legundary Triumph Scrambler 400 X Vector Radiator Grill Silver, Aluminium

    19 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Triumph Scrambler 400 X Vector Radiator Grill Silver, Legundary Aluminium Guard Product Description The Triumph Scrambler 400 X Vector Radiator Grill Silver from Legundary is designed specifically for the Triumph Scrambler 400 X. This radiator guard is built to provide frontal coverage for the radiator area while maintaining airflow through a precision-cut grill structure. Constructed from aluminium and finished in silver, the design follows the Scrambler 400 X’s front-end layout. The grill pattern is engineered to allow airflow while adding a protective barrier against stones, debris, and road elements encountered during riding. The Triumph Scrambler 400 X Vector Radiator Grill Silver measures 500 x 290 x 130 mm and has a listed weight of 0.96 kg. It is developed as a model-specific fitment and is positioned as an easy bolt-on installation without major modifications. For riders looking to add a dedicated radiator protection accessory to the Triumph Scrambler 400 X, this Legundary Vector Radiator Grill Silver provides a direct-fit aluminium solution aligned with the motorcycle’s styling and mounting points. Specifications Brand: Legundary Product Type: Radiator Grill / Radiator Guard Motorcycle Compatibility: Triumph Scrambler 400 X Material: Aluminium Finish: Silver Dimensions: 500 x 290 x 130 mm Weight: 0.96 kg Installation: Easy bolt-on

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,840.00 Rs. 2,988.00 ↓ You save Rs. 852.00

  • Save - Rs. 512.00 Legundary Royal Enfield Bear 650 Gopher Luggage Carrier black mild steel rear rack installed Legundary Royal Enfield Bear 650 Gopher Luggage Carrier – Black – view 2

    Legundary Legundary Royal Enfield Bear 650 Gopher Luggage Carrier, Black

    18 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Royal Enfield Bear 650 Gopher Luggage Carrier, Legundary Mild Steel Rear Carrier Product Description The Royal Enfield Bear 650 Gopher Luggage Carrier from Legundary is designed specifically for the Royal Enfield Bear 650. This rear carrier is built to provide a structured mounting platform for luggage during daily use and long-distance riding. Constructed from mild steel and finished in black, the carrier features a metal base plate designed to support mounted luggage. The structure allows riders to secure duffel bags, soft luggage, or mount a carrier plate for compatible top boxes. The layout is developed to align with the Royal Enfield Bear 650 frame geometry for proper fitment. The Royal Enfield Bear 650 Gopher Luggage Carrier measures 38 x 32 x 13 cm and has a listed weight of 1.74 kg. It is described as an easy-install component and can be removed when not required. The design focuses on providing a stable rear mounting surface for luggage. For riders seeking a dedicated rear luggage mounting solution for the Royal Enfield Bear 650, this Legundary Gopher Luggage Carrier provides a model-specific mild steel platform. Specifications Brand: Legundary Product Type: Luggage Carrier Motorcycle Compatibility: Royal Enfield Bear 650 Material: Mild Steel Finish: Black Dimensions: 38 x 32 x 13 cm Weight: 1.74 kg Installation: Easy Installation

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,500.00 Rs. 2,988.00 ↓ You save Rs. 512.00

  • Save - Rs. 386.00 Brembo P34007 Front Brake Pad Set - official Brembo product image

    Brembo Brembo Prime Brake Pads for Chevrolet & Isuzu

    21 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Brembo P34007 is a front-axle brake pad set from Brembo's Prime range for the Chevrolet & Isuzu, measuring 152 mm wide, 61 mm tall and 17 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 152 mm Height 61 mm Thickness 17 mm Braking system Akebono WVA number 25151,25150,25149 FMSI D1677 8906 Backplate Black, painted Accessories Anti-squeal shim Wear indicator Acoustic, built into the pad Approval ECE R90 type-approved EAN code 8020584104927 These pads carry an acoustic wear indicator, a metal tab that contacts the disc and squeals once the friction material nears its limit. Treat that noise as a prompt to inspect the pads.Fitment guidanceListed against the Chevrolet & Isuzu. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,988.00 - Rs. 10,601.00↓ You save Rs. 386.00

  • Save - Rs. 298.90 moto torque air filter interceptor 650 continental gt 650 bear 650 Moto Torque air filter for Royal Enfield Interceptor 650 Continental GT 650 Bear 650

    Mototorque Moto Torque Performance Air Filter for Royal Enfield Interceptor 650 / Continental GT 650 / Bear 650

    14 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Moto Torque Air Filter for Royal Enfield Interceptor 650, Continental GT 650 & Bear 650 The Moto Torque Performance Air Filter is precision-built for Royal Enfield Interceptor 650, Continental GT 650, and Bear 650 motorcycles. Designed for twin-cylinder performance platforms, this air filter enhances intake airflow while maintaining filtration integrity for consistent engine performance. Engineered to meet the demands of Royal Enfield 650cc motorcycles, the filter supports improved combustion efficiency, throttle response, and long-term riding performance across city, highway, and touring conditions. Designed for Royal Enfield 650 Platform • Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Bear 650• Twin-cylinder 650 engine compatibility Model-specific fitment ensures structural precision and consistent sealing within the airbox. Engineered Features 4-Layer High-Flow Cotton GauzeConstructed with four layers of precision-woven cotton gauze to improve intake flow while maintaining filtration integrity. Supports optimized combustion and sustained power output. Multi-Stage Filtration EfficiencyCaptures fine dust, debris, and airborne contaminants without restricting airflow. Designed for varied riding environments including urban traffic and open highways. Reusable & Serviceable DesignBuilt for longevity and sustainability. The filter can be cleaned, re-oiled, and reused, reducing replacement frequency and maintenance costs. Heat-Resistant & Structurally ReinforcedEngineered to withstand elevated temperatures and vibration stress typical of twin-cylinder engines. Enhanced Throttle Response & Engine EfficiencyBy reducing intake resistance, the filter promotes smoother throttle input, cleaner combustion, and improved fuel efficiency. Performance Profile by Motorcycle Royal Enfield Interceptor 650Supports smoother torque delivery and consistent cruising performance. Royal Enfield Continental GT 650Designed to complement aggressive acceleration and high-rev responsiveness. Royal Enfield Bear 650Reinforces airflow stability and engine endurance for long-haul touring. Specifications • Brand: Moto Torque• Product Type: Performance Air Filter• Compatibility: Interceptor 650 / Continental GT 650 / Bear 650• Construction: 4-Layer Cotton Gauze• Design: Reusable & Serviceable• Engine Type: Twin-Cylinder 650cc

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,287.90 Rs. 2,989.00 ↓ You save Rs. 298.90

  • Maddog Switch Pro with Integrated Wire Harness Pro for Motorcycle Auxiliary Lights Maddog Switch Pro with Integrated Wire Harness Pro – Plug & Play Control System Maddog Industries

    Maddog Industries Maddog Switch and Wire Harness Pro, Plug & Play Aux Light Control Kit

    12 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    The Maddog Switch and Wire Harness Pro is the next-generation control solution for riders who want clean, clutter-free auxiliary light installation. The Switch Pro combines pass function, on/off control, and beacon mode in a single smart soft-push button, and comes pre-bundled with the Wire Harness Pro for true plug-and-play setup right out of the box.The Wire Harness Pro uses a solid state relay protected circuit with IP-67 waterproof and dustproof rating, so it handles monsoon riding without hesitation. 100% pure copper terminals with tin coating ensure reliable conductivity over time.Compatibility note: Works exclusively with the Wire Harness Pro included in the kit. Not compatible with the standard Maddog Wire Harness, older Wire Harness Pro versions, or any third-party harnesses.Kit Contents: Switch Pro Wire Harness Pro 1× Handlebar clamp 2× Mirror mounting clamps Warranty card Screw set 4× Silicon belts

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,999.00 Rs. 2,989.00 ↓ You save Rs. 10.00

  • Moto Torque performance air filter for Royal Enfield Classic 350 Hunter 350 Meteor 350 Moto Torque Performance Air Filter for Classic 350, Hunter 350 & Meteor 350 – view 2

    Mototorque Moto Torque Performance Air Filter for Classic 350, Hunter 350 & Meteor 350

    12 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Moto Torque Performance Air Filter for Royal Enfield Classic 350, Hunter 350 & Meteor 350 The Moto Torque Performance Air Filter for Classic 350, Hunter 350 & Meteor 350 is designed specifically for Royal Enfield’s 350cc J-series platform. Built as a direct replacement air filter, it is engineered to support consistent airflow and filtration for everyday riding conditions. This air filter uses a 4-layer high-flow cotton gauze construction, designed to allow air intake while maintaining filtration integrity. The multi-stage filtration design helps capture dust, dirt, and airborne contaminants without restricting airflow, supporting stable engine operation. The filter is built as a reusable and serviceable unit, allowing cleaning and reinstallation instead of frequent replacements. This helps maintain consistent performance over time while reducing maintenance requirements. Designed for regular riding environments, the Moto Torque air filter for Classic 350, Hunter 350 and Meteor 350 is constructed to handle heat and vibration associated with single-cylinder engines. The air filter is compatible with Royal Enfield motorcycles using the J-series 350 platform and installs as a direct replacement without modification. Specifications Brand: Moto TorqueCompatibility: Royal Enfield 350cc J-SeriesFilter Type: High-flow air filterFilter Material: Cotton gauze (4-layer)Design: Multi-stage filtrationReusable: Yes (washable and reusable)Installation: Direct replacement

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,000.00 Rs. 2,999.00 ↓ You save Rs. 1.00

  • N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 — Reusable Cotton Gauze Performance Filter N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 (Classic, Meteor, Hunter) Ngage

    Ngage N-Gage Hyper Flow Air Filter for Royal Enfield Meteor 350, Classic 350 & Hunter 350

    19 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 (Classic 350 / Meteor 350 / Hunter 350) The N-Gage Hyper Flow Air Filter for Royal Enfield J-Platform 350 is a performance-oriented replacement air filter crafted specifically for Royal Enfield motorcycles built on the J-platform. This includes popular models like the Classic 350, Meteor 350, and Hunter 350. Designed as a direct stock replacement, it boosts airflow efficiency while maintaining dependable filtration for everyday riding conditions. This Royal Enfield air filter ensures your engine breathes freely without compromising protection. Modern BS6 motorcycles depend on a precise air, fuel balance to offer smooth throttle response, consistent combustion, and long-term engine stability. The air filter plays a crucial role in this system, controlling both the volume and cleanliness of intake air entering the engine. The N-Gage Hyper Flow Air Filter improves intake airflow compared to standard disposable paper filters, while protecting the engine from dust, debris, and moisture. This is especially important for Indian riding environments where conditions can be harsh and unpredictable. Royal Enfield Air Filter with High-Flow Cotton Gauze Construction This Royal Enfield air filter is built using premium organic cotton gauze, layered and specially treated to allow greater airflow without sacrificing filtration performance. Unlike conventional paper filters, which restrict airflow over time as they collect dirt, cotton gauze filters maintain more consistent airflow when cleaned. Proper maintenance ensures longevity and consistent engine protection. The filter arrives factory pre-oiled, which helps trap fine dust particles effectively while still allowing increased air volume. This balance between airflow and filtration is essential for stable engine performance in all riding conditions, from stop-and-go city traffic to extended highway cruises. Designed Specifically for Royal Enfield J-Platform 350cc Engines The N-Gage Hyper Flow Air Filter fits precisely within the stock airbox of Royal Enfield’s J-platform 350cc engines. It installs as a direct replacement with no cutting, drilling, trimming, or modification needed. This makes upgrading your motorcycle’s filter simple and hassle-free. This air filter matches factory dimensions and mounting points, integrating seamlessly with the original intake system. This means riders can improve airflow without changing the motorcycle’s stock intake layout, sealing, or weather protection. These features enhance the bike’s reliability during daily use in varying conditions. Throttle Response and Ride Feel with the N-Gage Royal Enfield Air Filter Improved airflow contributes to smoother throttle response and more consistent power delivery across all rpm ranges. Many riders choose high-flow air filters to reduce intake restriction and help the engine breathe freer during acceleration and steady cruising. This Royal Enfield air filter is designed for riders seeking enhanced ride feel without complex modifications. According to manufacturer specifications, this air filter offers performance gains of up to 0.5 BHP under optimal conditions. However, real-world results may vary based on factors like riding style, maintenance habits, fuel quality, and overall engine condition. The filter works perfectly with the stock ECU and exhaust system and requires no ECU remapping or tuning adjustments. Reusable and Long-Term Ownership Benefits Unlike disposable paper filters that need frequent replacement, this N-Gage air filter is washable and reusable. Regular cleaning and re-oiling using appropriate maintenance products allow multiple reuses across the filter’s lifespan. This makes it an eco-friendly and cost-effective solution for riders. Choosing this filter supports long-term ownership goals, reducing consumable waste and maintaining consistent performance over time. Regular maintenance is vital to ensure continuous filtration efficiency and engine protection, especially in dusty or high-usage scenarios commonly faced by riders. Built for Real-World Indian Riding Conditions with the Royal Enfield Air Filter Indian roads often present challenges such as high dust levels, humidity, heavy monsoon rain, and temperature swings. The N-Gage Hyper Flow Air Filter is engineered to deliver consistent filtration across dust and rain conditions, making it ideal for daily commutes, highway tours, and mixed-use riding. This filter is compatible with BS6, Euro 4, and Euro 5 compliant models, meeting current emission norms while focusing equally on airflow efficiency and intake cleanliness. These attributes ensure your motorcycle maintains top performance while adhering to environmental regulations. Installation and Maintenance Guidance Installation of the filter follows the exact procedure as replacing a standard stock air filter and requires no special tools or technical know-how. Riders should follow recommended service intervals for inspection, cleaning, and re-oiling to maintain optimal performance and filtration consistency throughout the filter’s lifespan.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 2,999.00 - Rs. 4,099.00↓ You save Rs. 1.00

  • Rolon chain and sprocket kit in its retail box

    Rolon Rolon Brass Chain & Sprocket Kit for KTM Duke 125 (BPR Kit HPORC 373NF)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon BPR brass-plated sealed chain and sprocket kit for the KTM Duke 125 (new model). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HPORC-112-2 Front sprocket 14T (SR 02 249), 2 holes Rear sprocket 45T (S 02 661 with SF), 6 holes Rolon kit reference HPORC 373NF Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,040.00 Rs. 3,030.00 ↓ You save Rs. 10.00

  • Save - Rs. 762.00 MotoCare pipe carrier for TVS Apache RTX 300 rear luggage rack MotoCare Pipe Carrier for TVS Apache RTX 300 – Rear Luggage Rack – view 2

    Moto Care MotoCare Pipe Carrier for TVS Apache RTX 300, Rear Luggage Rack

    15 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Minimal. Functional. Built for riders who want luggage capability without added bulk. The MotoCare Pipe Carrier for TVS Apache RTX 300 is a purpose-built rear luggage rack designed to provide a stable and secure mounting platform for your gear. Whether it’s daily essentials or touring luggage, this carrier ensures reliable load support without compromising the motorcycle’s design or balance. Model-Specific Engineering Designed exclusively for the Apache RTX 300, ensuring: Precise mounting points Stable load distribution No interference with body panels Clean integration with stock design This is not a universal carrier, it’s built to fit right. Practical Luggage Utility Supports: Tail bags Touring luggage Daily commute gear The flat platform design ensures easy strapping and secure placement, making it ideal for both short rides and long-distance touring. Build Quality & Durability High-strength metal construction Rigid mounting structure Designed for load stability under real riding conditions Corrosion-resistant finish for long-term durability Built to handle Indian roads, not just showroom display. Installation & Fitment Direct-fit for Apache RTX 300 No major modification required Professional installation recommended for best alignment Real-World Use Case Ideal for: Touring riders Daily commuters carrying essentials Riders wanting a minimal luggage setup Clean builds without bulky accessories Warranty 1 Year Manufacturer Warranty Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For complete details, please refer to our warranty policy.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,800.00 Rs. 3,038.00 ↓ You save Rs. 762.00

  • CRANK1 Brake Pads for Triumph Rocket 3 Storm, Sintered, Front & Rear, CRANK1 CB744 in retail packaging CRANK1 Brake Pads for Triumph Rocket 3 Storm, Sintered & Carbon, Front & Rear

    CRANK1 CRANK1 Brake Pads for Triumph Rocket 3 Storm, Sintered & Carbon, Front & Rear

    18 reviews

    CRANK1 performance brake pads for the Triumph Rocket 3 Storm, all in one place. Choose your compound (Sintered) and fitment from the selector above. Every CRANK1 pad is HH-rated and engineered to match or surpass OEM stopping power.A Carbon compound is being added to this range and will appear here as an additional option.Fitment guidanceThis listing covers the following fitments for the Triumph Rocket 3 Storm: Front (2013-2019) Rear (2013-2019) Front (2024) Rear (2024) Front + Rear (2013-2019) Front + Rear (2024) Front fitments on twin-disc models are supplied as a complete set for both calipers. Choose the option that matches your model year, if you are unsure which set your bike takes, our team is happy to help with fitment guidance before you order.Why CRANK1HH-rated friction • Great initial bite • High-heat stability • Excellent wet handling • Long pad and rotor life • Low brake dustFrequently asked questionsWhich compound should I choose for my Triumph Rocket 3 Storm?Ceramic suits everyday street and touring with smooth, quiet, low-dust braking that is gentle on rotors. Sintered delivers stronger high-heat bite for aggressive, track or loaded riding.Will these fit my model year?Pick the fitment option that matches your year. Ask us for fitment guidance if you are unsure.Are these genuine CRANK1 pads?Yes, genuine CRANK1 HH-rated pads, developed through years of friction-material research.How do I bed them in?Use progressive braking over the first 150-200 km and avoid hard high-speed stops until the pads are seated.Delivery & returns?Dispatched in 1-2 days with pan-India shipping; 5-day returns.

    Rs. 3,040.00 - Rs. 9,429.00

  • Save - Rs. 231.00 Brembo P50008 Front Brake Pad Set - official Brembo product image

    Brembo Brembo Prime Brake Pads for Mercedes W124

    15 reviews

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Brembo P50008 is a front-axle brake pad set from Brembo's Prime range for the Mercedes W124, measuring 110 mm wide, 60 mm tall and 19 mm thick.Prime is Brembo's OE-matched road range. The friction material is specified to match original equipment braking performance, the backplate is painted against corrosion, an anti-squeal shim is included, and the set is ECE R90 type-approved. Brembo lists it as the pad to run with Prime brake discs.This is not the Xtra range, which is Brembo's sport pad line for drilled discs, and not the ceramic (N-suffix) range, which we do not currently stock.Specification Range Brembo Prime Technical content OE-matched Axle Front Width 110 mm Height 60 mm Thickness 19 mm Braking system Lucas WVA number 21028,20941 FMSI D423 7311 Backplate Black, painted Accessories Anti-squeal shim, brake caliper bolts Wear indicator Prepared for a wear indicator Approval ECE R90 type-approved EAN code 8020584053805 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes W124. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,093.00 - Rs. 7,861.00↓ You save Rs. 231.00

  • Rolon Orange Kit chain and sprocket kit box Rolon chain and sprocket kit in its retail box

    Rolon Rolon Orange Chain & Sprocket Kit for Bajaj Pulsar RS 200 (Orange Kit HPORO 377NF)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon Orange sealed chain and sprocket kit for the Bajaj Pulsar RS 200. The orange-finished chain is built to the same sealed-ring spec as the standard kit, and picks up the RS 200's own orange graphics.What's in the kit Orange-finished sealed chain R520HPORO-110-2 Front sprocket 14T (SR 02 249), 2 holes Rear sprocket 41T (S 02 617), 6 holes Rolon kit reference HPORO 377NF Why the Orange kit Sealed ring construction holds factory grease in and grit out Orange finish that reads as a deliberate build detail, not a wear item Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Same fitment as the standard RS 200 kit, only the chain finish differs. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,127.00 Rs. 3,117.00 ↓ You save Rs. 10.00

  • Rolon chain and sprocket kit in its retail box

    Rolon Rolon Brass Chain & Sprocket Kit for Bajaj Dominar 250 (BPR Kit HPORC 391)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon BPR brass-plated sealed chain and sprocket kit for the Bajaj Dominar 250. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HPORC-120-2 Front sprocket 14T (S 02 552), 2 holes Rear sprocket 46T (S 02 677), 6 holes Rolon kit reference HPORC 391 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model you have.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,138.00 Rs. 3,120.00 ↓ You save Rs. 18.00

  • Save - Rs. 392.00 EBC Ultimax brake pads, range image EBC Ultimax brake pad performance chart

    EBC EBC Ultimax Brake Pads for MERCEDES W124 (DP927/2)

    13 reviews

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    EBC DP927 is a front-axle brake pad set for the MERCEDES W124, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the MERCEDES W124. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

    1-3 weeks  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,121.00 - Rs. 7,728.00↓ You save Rs. 392.00

  • Rolon Orange Kit chain and sprocket kit box Rolon chain and sprocket kit in its retail box

    Rolon Rolon Orange Chain & Sprocket Kit for Bajaj Pulsar NS 200 (Orange Kit HPORO 376)

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rolon Orange sealed chain and sprocket kit for the Bajaj Pulsar NS 200 (new model). The orange-finished chain is built to the same sealed-ring spec as the standard kit, and suits the NS 200's blacked-out frame and orange graphics.What's in the kit Orange-finished sealed chain R520HPORO-110-2 Front sprocket 14T (S 02 552), 2 holes Rear sprocket 41T (S 02 617), 6 holes Rolon kit reference HPORO 376 Why the Orange kit Sealed ring construction holds factory grease in and grit out Orange finish that reads as a deliberate build detail, not a wear item Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Fits the September 2015 onwards NS 200. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure of your build date.

    Fast dispatch  Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.

    Rs. 3,154.00 Rs. 3,140.00 ↓ You save Rs. 14.00

Hot deals. Real performance. Limited-time pricing across riding gear, tuning modules, protection parts, maintenance essentials, and motorcycle accessories - all in one place.

From premium helmets and riding equipment to ECU tuners, filters, guards, detailing products, and everyday upgrades, this collection brings together the best offers from Rawtorque. Built for riders who want more performance, more style, and more value without compromising on quality.

Stock moves fast and offers change regularly. Grab your upgrades before the prices climb back up.

No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000 No Cost EMI 0% interest for 3 months on orders over ₹10,000

Login

Forgot your password?

Don't have an account yet?
Create account