Control Your Exhaust. On Your Terms.
Your valved exhaust has two modes, you just haven't been able to use both. The Valvetronic Exhaust Valve Control Module (Manual) gives you a handlebar-mounted switch that physically opens or closes the exhaust butterfly valve whenever you want. Full roar on the open highway. Clean and quiet through the colony, toll booth, or early morning streets. No apps. No wiring. No compromise.
This is the most reliable way to control a valved exhaust, because there's nothing electronic to fail. A cable connects your thumb to the valve. That's it.
What This Module Does
Valved exhausts come with an internal butterfly valve that changes how exhaust gases flow. When the valve is closed, gases pass through a baffled internal route, quieter, more refined. When the valve is open, gases take the free-flow path, louder, rawer, with a more aggressive exhaust note.
Most valved exhausts ship without any control module. The valve stays fixed in one position. This module gives you a switch to change it, whenever you want, from the handlebar.
Closed valve: Quiet, compliant, neighbour-friendly. Use it in residential areas, at idle, in traffic, on early morning rides.
Open valve: The sound your exhaust was built to make. Use it on highways, open roads, or anywhere you want the full character of your exhaust to come through.
Why Manual Over Electric
Zero electronics. No solenoid, no servo, no wiring loom, no relay. Nothing to short, corrode, or fail over time.
Works anywhere, always. The valve opens when you pull the cable. No power required. No sensor needed. Doesn't care if your bike is warm, cold, or idling.
You're in control. The valve is exactly where you put it, open or closed, until you choose to change it. No automatic switching when you don't want it.
Simple to install. Route the cable, connect to the valve actuator, mount the switch. No ECU tapping, no wiring diagrams, no calibration.
Built to last. A cable and a switch outlast any electronic actuator on a motorcycle. Less to maintain, less to replace.
How It Works
A control switch mounts on your handlebar. A cable runs from the switch down to the butterfly valve actuator on your exhaust. When you flick the switch, cable tension physically rotates the valve between open and closed. The entire system is mechanical, no power draw from your bike's electrical system, no ECU communication, no mapping required.
Installation requires routing the cable cleanly along the frame to the exhaust, connecting to the existing valve actuator arm, and adjusting cable tension for full travel in both directions. A standard workshop should be able to install this in under an hour on most platforms.
Compatible Bikes
This is a universal module: it works with any valved exhaust system that supports mechanical cable actuation, regardless of bike brand or model. Below is a verified compatibility reference across popular Indian market platforms. If your bike has a valved slip-on, this module can control it.
Royal Enfield
Interceptor 650 / Continental GT 650 / Classic 650 / Bear 650
Classic 350 (Reborn) / Hunter 350 / Meteor 350
Himalayan 411 / Himalayan 450 / Guerrilla 450
Scram 411 / Super Meteor 650 / Shotgun 650
KTM
Duke 125 / Duke 200 / Duke 250 / Duke 390
RC 125 / RC 200 / RC 390
Adventure 250 / Adventure 390 / Adventure 390 (2025)
790 Adventure
Triumph
Speed 400 / Scrambler 400 X / Tiger 400
Street Triple 675 / Speed T4
Bonneville T100 / T120 / Street Twin
Tiger 800 / Street Scrambler 900
Yamaha
MT-15 V2 / R15 V3 / R15 V4
FZ25 / FZS25 / Fazer 25
MT-03 / R3
YZF-R1 / YZF-R6 / MT-07
Kawasaki
Ninja 400 / Ninja 650 / Ninja 1000 SX
Z800 / Z900 / Z900 (2026)
Versys 650 / Versys-X 300 / Versys 1000
Honda
CB200X / CB350 Highness / CB350RS
CBR 250R / CB300R / CB300F
CBR 650R / CBR 650F / CB Hornet 160R
Africa Twin / NX200
Bajaj
Pulsar NS200 / RS200 / AS200 / 220F
Dominar 250 / Dominar 400
NS 400Z
TVS
Apache RR 310 / Apache RTR 200 4V
Ronin
BMW
G 310 R / G 310 GS / G 310 RR
S 1000 R / S 1000 XR / R 1000 GS
Suzuki
Gixxer 250 / V-Strom 250SX / V-Strom 650
GSX-R750 / GSX-S750 / GSX-R1000
Hayabusa (2021 Onwards)
Ducati
Scrambler 800 / Scrambler 1100
Monster 797 / Monster 1200
Hypermotard 939 / Multistrada 950
Streetfighter V4
Harley Davidson
Street 750 / Street Rod
X440 / X440T
Forty Eight / Iron 883
Jawa / Yezdi
Jawa 42 FJ / Jawa Perak
Yezdi Adventure / Yezdi Roadster
Hero
Karizma XMR / Xpulse 200 4V / Xpulse 210
Benelli
TRK 502 / TRK 502X / TNT 600i / TNT 899
This module is universal, it controls the valve mechanism, not the exhaust itself. Your exhaust must have a butterfly valve with a mechanical actuator arm. Confirm exhaust compatibility before ordering. If your bike model isn't listed but runs a valved slip-on, this module will work.
What's in the Box
1 × Valvetronic Manual Control Switch (handlebar mount)
1 × Control cable assembly
Mounting hardware
Exhaust system not included. Module requires a compatible valved exhaust to function.
Specifications
Control Type: Manual (mechanical cable)
Actuation: Direct cable-pull butterfly valve operation
Power Required: None
ECU / Wiring Integration: Not required
Valve Positions: Open / Closed (user-operated)
Mount: Handlebar switch with cable routing
Fitment: Universal, compatible with mechanically-actuated valved exhausts
Brand: Valvetronic
MRP: ₹3,499
Also Available
Want automatic valve switching based on RPM and throttle input? The Valvetronic Electric (Automatic) Module does exactly that, the valve opens and closes on its own as you ride. View the Electric Module →
Read
more
less
