Car | Rawtorque

Radiator Stop Leak seals minor leaks in the cooling system from the inside, without dismantling the radiator. Added to the coolant, it finds and closes small leaks while remaining compatible with cooling and heating systems, a quick fix to stop a slow coolant loss. What it does Seals small leaks in radiators and the cooling circuit Works in systems with and without water filters Good thermal resistance and stability, mixes with the coolant How to use Shake well and add to the coolant in the expansion tank or radiator, then run the engine to circulate. Follow the dosing on the pack. Specifications Article number: 7129 Content: 250 ml Use in: engine cooling systems Fitment guidance A temporary remedy for minor leaks. Persistent or major leaks need a proper repair. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Silicone Spray is a clean, versatile lubricant and protectant for rubber, plastic and metal. It frees sticking parts, silences squeaks and creaks, and leaves a protective film that keeps door seals and trim supple, a handy all-rounder for the garage and the car. What it does Lubricates and protects rubber, plastic and metal Stops squeaks and frees sticking seals and mechanisms Keeps door and window rubbers supple and water-repellent How to use Shake well and spray a thin film onto the clean surface. Wipe off any excess. Specifications Article number: 3310 Content: 300 ml Use on: rubber, plastic and metal parts Genuine Liqui Moly, made in Germany.

Read more less

Octane Booster raises the octane number of petrol and cleans the fuel system in one shot. Higher octane means stronger, more controlled combustion, better throttle response and protection against knocking, useful for performance petrol cars and bikes running on ordinary pump fuel. What it does Increases the octane rating of petrol for better combustion Cleans the fuel system as it works Improves response and protects against knock under load How to use Add to the petrol tank before refuelling. Safe for catalytic converters. Dose as directed on the pack. Specifications Article number: 21616 Content: 200 ml Use in: petrol cars and motorcycles Fitment guidance For petrol engines only. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Top Tec ATF 1900 is a fully synthetic automatic transmission fluid engineered for high efficiency and smooth operation. Its low-friction formulation supports fuel economy and stable shifting across the temperature range. What it does Outstanding friction characteristics for smooth, efficient shifting Low-friction formulation that supports fuel economy Excellent viscosity and temperature stability Specifications Article number: 3648 Content: 1 L Type: fully synthetic automatic transmission fluid Fitment guidance Automatic transmission fluids must match the exact specification your gearbox requires. Always confirm the correct ATF for your vehicle, the full current specification is printed on the pack. Tell us your car and gearbox and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Top Tec ATF 1600 is a fully synthetic automatic transmission fluid for modern automatic gearboxes that demand a premium fluid. It delivers smooth shifting and resists foaming for consistent power transfer under load. What it does Excellent wear resistance and outstanding friction characteristics Anti-foam performance for consistent, smooth shifting Long fluid life with strong thermal stability Specifications Article number: 3659 Content: 1 L Type: fully synthetic automatic transmission fluid Fitment guidance Automatic transmission fluids must match the exact specification your gearbox requires. Always confirm the correct ATF for your vehicle, the full current specification is printed on the pack. Tell us your car and gearbox and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Top Tec ATF 1400 is a high-performance automatic transmission fluid built for stable, smooth operation and a long service life. Its strong wear resistance and ageing stability keep older and modern automatics shifting cleanly. What it does Excellent wear resistance and ageing stability Smooth shifting with reliable friction behaviour Strong oxidation and corrosion protection Specifications Article number: 3662 Content: 1 L Type: automatic transmission fluid Fitment guidance Automatic transmission fluids must match the exact specification your gearbox requires. Always confirm the correct ATF for your vehicle, the full current specification is printed on the pack. Tell us your car and gearbox and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Top Tec ATF 1800 is a high-performance, fully synthetic automatic transmission fluid for modern multi-speed automatic gearboxes. It is engineered for smooth, precise shifting and long-term protection of the transmission. What it does Smooth, responsive shifting with stable friction behaviour Strong protection against wear, foaming and ageing Maintains performance across a wide temperature range Specifications Article number: 3687 Content: 1 L Type: fully synthetic automatic transmission fluid Fitment guidance Automatic transmission fluids must match the exact specification your gearbox requires. Always confirm the correct ATF for your vehicle, the full current specification is printed on the pack. Tell us your car and gearbox and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Top Tec ATF 1200 is a fully synthetic automatic transmission fluid for modern automatic gearboxes. It delivers smooth, consistent shifting with excellent corrosion protection and stable friction behaviour over a long service life. What it does Smooth, precise shifting and stable friction characteristics Excellent oxidation and corrosion protection for a long fluid life Reliable performance across a wide temperature range Specifications Article number: 3681 Content: 1 L Type: fully synthetic automatic transmission fluid Fitment guidance Automatic transmission fluids must match the exact specification your gearbox requires. Always confirm the correct ATF for your vehicle, the full current specification is printed on the pack. Tell us your car and gearbox and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Gear Oil Additive carries molybdenum disulfide into manual gearbox oil, where it lays down a low-friction film on the gears. The result is smoother, easier shifting, less wear and quieter running, a simple upgrade at a gear-oil change. What it does Reduces friction and wear on manual transmission gears Smooths gear engagement and shift feel Helps cut gearbox noise and vibration How to use Add to the manual gearbox oil. One tube treats a standard gearbox fill. Best added at a gear-oil change. Specifications Article number: 1040 Content: 20 g Use in: manual transmissions Fitment guidance For manual gearboxes. Not for use in transmissions where the maker prohibits friction modifiers, such as some synchromesh or limited-slip units. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Synthoil Energy 0W-40 is a top-tier, fully synthetic motor oil for high-performance petrol and diesel engines. The 0W-40 grade flows instantly on cold start and holds a strong film when hot, delivering maximum protection with excellent fuel economy, a premium fill for German and performance cars. What it does Fully synthetic protection with instant cold-start flow Stable high-temperature film for hard-driven engines Outstanding engine cleanliness and low oil consumption Specifications Article number: 21101 Viscosity: SAE 0W-40 Content: 4 L Meets / suitable for: API SN; ACEA A3/B4; VW 502 00 / 505 00; MB-Approval 229.5; BMW Longlife-01; Porsche A40; Renault RN 0700 / 0710 Fitment guidance For petrol and diesel engines specifying a 0W-40 to the approvals above. Always confirm the grade your engine requires. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack. Genuine Liqui Moly, made in Germany.

Read more less

Molygen 5W-30 in the 4-litre service pack, sized for a full oil change. It carries Liqui Moly's Molygen anti-friction technology in a fuel-economy 5W-30 grade, keeping modern petrol and diesel engines clean and well protected while reducing internal friction. What it does Molygen friction-modifier network reduces wear and supports fuel efficiency Outstanding engine cleanliness over the service interval Reliable cold-start flow and stable high-temperature protection Specifications Article number: 9089 Viscosity: SAE 5W-30 Content: 4 L Meets / suitable for: API SN; ACEA A3/B4 Fitment guidance For petrol and diesel engines specifying a 5W-30 of this performance level. Always confirm the exact grade and approval your engine requires. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack. Genuine Liqui Moly, made in Germany.

Read more less

Central Hydraulic System Oil is a synthetic central hydraulic fluid (CHF) for power steering, level control and hydropneumatic suspension systems. The free-flowing green fluid stays stable from deep cold to high heat and protects the system against wear and corrosion, the correct fill for many European vehicles that specify a CHF. What it does Reliable operation of power steering, level control and suspension hydraulics Excellent cold-flow and high-temperature stability Strong wear and corrosion protection for pumps and valves Specifications Article number: 1127 Content: 1 L Type: synthetic central hydraulic fluid (green) Fitment guidance Use only where a green central hydraulic fluid (CHF) is specified by the vehicle maker. Confirm the exact fluid your system requires before topping up, the full current specification is printed on the pack. Tell us your car and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Octane Plus raises the octane number of petrol for stronger, cleaner combustion and better anti-knock behaviour. A useful top-up for performance petrol engines and for riders or drivers who want to get the most from pump fuel. What it does Increases the octane rating of petrol Improves combustion and reduces knocking and pinking Helps the engine run more smoothly under load How to use Add to the petrol tank before filling. Safe for catalytic converters. Dose as directed on the pack. Specifications Article number: 8351 Content: 150 ml Use in: petrol cars and motorcycles Fitment guidance For petrol engines only. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

A/C System Cleaner clears the musty smell that builds up in a car's air-conditioning over an Indian summer. The aerosol cleans and disinfects the evaporator and ducting, killing the bacteria, fungi and mould that cause odours, with no need to dismantle the system. What it does Cleans and disinfects the evaporator and air ducts Removes bacteria, fungi and mould that cause bad smells Refreshes cabin air without opening up the AC system How to use Run the AC, place the can in the footwell as directed and let it discharge through the system. Works on cars, SUVs and commercial vehicles. Specifications Article number: 4087 Content: 250 ml Use on: vehicle air-conditioning systems Genuine Liqui Moly, made in Germany.

Read more less

Oil Smoke Stop tackles the blue smoke and high oil consumption that show up in higher-mileage engines. It stabilises the oil film at the piston rings and valve guides, so less oil is burned, compression improves and the engine runs quieter. What it does Reduces oil consumption through piston rings and valve guides Helps stop blue exhaust smoke and restore compression Stabilises oil viscosity at high temperature and quietens the engine How to use Add to the engine oil. One 300 ml can treats up to roughly 5 litres of oil. Compatible with all commercial motor oils. Specifications Article number: 8360 Content: 300 ml Use in: 4-stroke petrol and diesel engines Fitment guidance For car petrol and diesel engines. Not for motorcycles with an oil-bath wet clutch. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Engine Oil Treatment is a wear-protection additive that forms a tough lubricating layer on engine components, reducing friction and quietening the engine. A simple, low-cost way to add a margin of protection at an oil change, suitable for both petrol and diesel motors. What it does Forms a protective film that reduces friction and wear Helps quieten engine running and smooth out operation Miscible with all commercial mineral and synthetic motor oils How to use Add to the engine oil, ideally at an oil change. One bottle treats the standard car oil fill. Specifications Article number: 2587 Content: 300 ml Use in: 4-stroke petrol and diesel engines Fitment guidance Intended for car petrol and diesel engines. Not recommended for motorcycles with an oil-bath wet clutch. If unsure, reach out and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Speed Tec Gasoline is a performance fuel additive that sharpens throttle response and acceleration while cleaning the fuel system. It works on the friction and combustion side at once, giving a noticeable lift in responsiveness on petrol engines. What it does Improves acceleration and throttle response Cleans the fuel system and optimises combustion Reduces friction losses in the upper cylinder area How to use Add to the petrol tank. One 250 ml bottle treats up to 75 litres of fuel. Tested for use with catalytic converters and turbochargers. Specifications Article number: 3720 Content: 250 ml Treatment: up to 75 L of petrol Use in: petrol engines Fitment guidance For petrol engines only. A diesel version is available separately. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Catalytic System Clean is a petrol fuel-system additive that cleans the combustion chamber, valves, spark plugs and the catalytic converter in one tank. It is the go-to product for restoring smooth running, lowering emissions and clearing a converter that has started to clog, often saving an expensive part replacement. What it does Cleans the entire intake, combustion and exhaust path through to the catalytic converter Reduces emissions and can help pass a pollution / PUC check Smooths idle and throttle response on engines with deposit build-up How to use Add the full bottle to the fuel tank. One 300 ml can treats up to 70 litres of petrol. Safe for use with catalytic converters. Specifications Article number: 7110 Content: 300 ml Treatment: up to 70 L of petrol Use in: petrol engines with or without a catalytic converter Fitment guidance For petrol engines only. Not for diesel vehicles. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Molygen New Generation 5W-40 pairs a modern synthetic-technology base oil with Liqui Moly's Molygen anti-friction additive, giving it the distinctive green tint and a wear-protection edge. A strong all-round choice for petrol and diesel cars that call for a 5W-40. What it does Molygen friction-modifier network reduces wear and helps lower fuel consumption Keeps engines exceptionally clean and protects over long oil-change intervals Stable protection across high and low operating temperatures Specifications Article number: 8576 Viscosity: SAE 5W-40 Content: 1 L Meets / suitable for: API SN; ACEA A3/B4; VW 502 00 / 505 00; MB-Approval 229.3; Renault RN 0700 / 0710 Fitment guidance For petrol and diesel engines specifying a 5W-40 to the approvals above. Always confirm the grade your engine requires in the owner's manual. Share your car and we will help with fitment guidance. The full current specification is printed on the pack. Genuine Liqui Moly, made in Germany.

Read more less

Special Tec DX1 5W-30 in the 4-litre service pack, sized for a complete oil change on most modern petrol cars. This fully synthetic, low-friction oil is the right modern fill for many Maruti Suzuki, Hyundai, Kia, Tata and GM petrol models that call for a dexos1 Gen 2 grade. What it does Fully synthetic 5W-30 with a low-friction additive package for smooth cold starts and lower fuel consumption Keeps the engine clean and protected over extended oil-change intervals Excellent thermal and shear stability for stop-go traffic and hot conditions Specifications Article number: 20968 Viscosity: SAE 5W-30 Content: 4 L Meets / suitable for: GM dexos1 Gen 2, API SP, ILSAC GF-6A Fitment guidance Use where a dexos1 Gen 2 / API SP / ILSAC GF-6A 5W-30 is specified. Always check the grade and approval in your owner's manual. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack. Genuine Liqui Moly, made in Germany.

Read more less

Special Tec DX1 5W-30 is a fully synthetic, low-friction motor oil engineered for the latest generation of petrol engines. It is the right modern fill for a large share of cars on Indian roads, including many Maruti Suzuki, Hyundai, Kia, Tata and GM petrol models that call for a dexos1 Gen 2 grade. What it does Fully synthetic 5W-30 with a low-friction additive package for smooth cold starts and lower fuel consumption Keeps the engine clean and protected over extended oil-change intervals Excellent thermal and shear stability for stop-go traffic and hot conditions Specifications Article number: 20967 Viscosity: SAE 5W-30 Content: 1 L Meets / suitable for: GM dexos1 Gen 2, API SP, ILSAC GF-6A Fitment guidance Use where a dexos1 Gen 2 / API SP / ILSAC GF-6A 5W-30 is specified. Always check the grade and approval in your owner's manual. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack. Genuine Liqui Moly, made in Germany.

Read more less

Cera Tec is Liqui Moly's flagship friction and wear protection additive, built around a suspension of ceramic boron-nitride particles that bond to metal surfaces inside the engine. The result is a smoother, quieter, better-protected drivetrain that holds up under high load and high temperature. One 300 ml bottle treats up to 5 litres of engine oil and stays effective for roughly 50,000 km, so a single dose covers most owners for a year or more of driving. What it does Lays down a ceramic protective layer that reduces metal-to-metal friction and wear Resists extreme pressure and temperature, including momentary lubrication-loss conditions Lowers running friction, which can improve smoothness and fuel efficiency Chemically stable and miscible with all commercial mineral and synthetic motor oils How to use Add the full bottle to warm engine oil. One 300 ml bottle is dosed for up to 5 litres of oil. Best added at an oil change. Effective for approximately 50,000 km. Specifications Article number: 3721 Content: 300 ml Treatment: up to 5 L of engine oil, effective ~50,000 km Use in: 4-stroke petrol and diesel engines Fitment guidance Suited to cars and other 4-stroke petrol or diesel engines. Not intended for motorcycles with an oil-bath wet clutch. If you are unsure whether Cera Tec suits your vehicle, reach out and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Brembo L15210 is a fully synthetic DOT 5.1 brake fluid, low viscosity, supplied in a 1 litre bottle.Low viscosity fluid stays thinner at low temperature, which lets ABS and stability control systems move fluid quickly in cold conditions. Where a car specifies a low viscosity fluid, a standard one is not a substitute.The figures below are the minimums the DOT 5.1 standard itself requires, not measured values for this bottle.Specification Part number L15210 Standard DOT 5.1 Volume 1 litre Type Fully synthetic, glycol ether based Minimum dry boiling point for this standard 260 °C Minimum wet boiling point for this standard 180 °C Viscosity class Low viscosity Brake fluid is hygroscopic, meaning it absorbs moisture from the air over time, and that moisture lowers its boiling point long before the fluid looks dirty. Most manufacturers specify a change every two years regardless of mileage. Never mix a glycol-based fluid with DOT 5 silicone fluid, and never reuse fluid that has been opened and left standing.Which fluid does my car takeThe required specification is printed on your brake fluid reservoir cap and in the owner's handbook. A fluid meeting a higher DOT number may be used where a lower one is specified, but never the reverse. If you are unsure, send us your registration number and we will help you confirm it.Buying thisGST-inclusive pricing with a proper invoice, shipped across India.

Read more less