Performance Parts

The Storm Exhaust for BMW R 1300 GS (2025) is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the BMW R 1300 GS (2025).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the BMW R 1300 GS (2025). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for BMW R 1250 GS Adventure is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the BMW R 1250 GS Adventure.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the BMW R 1250 GS Adventure. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Valvetronic Exhaust End Cans with Remote (Vacuum-Operated)Valvetronic vacuum-operated exhaust end cans with remote control, open the valve for an aggressive sporty note or close it for a quiet cruise, at the press of a button. Stainless-steel construction, universal 38 mm fitment.Compatible Vehicle(s)Universal fit, most cars (38 mm tail pipe). Ideal for VW Polo, Vento, Virtus and similar.Specifications Type: Valvetronic Vacuum End Cans with Remote Pipe Material: Stainless Steel Pipe Diameter: 38 mm Control: Wireless Remote Sold per Piece. Unbranded / universal-market aftermarket product. Professional installation recommended.

Read more less

Five upgrades that work together, chosen because they complement one another rather than compete. Built around the CB350RS and its own blacked-out silencer, so nothing here is a compromise borrowed from another variant. What is in the package Red Rooster Pegasus RS Slip-On Exhaust, Black finishthe RS-specific unit, stainless, retains the factory header, chosen in black to sit with the RS’s darker treatment BMC FM01155 Performance Air Filterwashable cotton gauze, drops into the standard airbox NGK Iridium IX CPR8EAIX-9 Spark Plugfine-wire electrode for a more consistent burn NGage HB 089 Whisker Ceramic Brake Pads, front NGage HB 150 Whisker Ceramic Brake Pads, rear Why these five The CB350 is a long-stroke single that does its work between 2,500 and 5,000 rpm. Everything here is chosen to respect that rather than chase a top end the engine was never built to reach. The exhaust is a slip-on that keeps the factory header, which is deliberate. A full system with a larger primary would trade away the low-end torque that makes this engine pleasant. The filter lets it breathe without disturbing the airbox or the sensors inside it. The iridium plug fires more consistently, which matters most when the mixture is working hardest. The ceramic pads are the quiet inclusion that owners tend to appreciate most. They bite well from cold, which is exactly what city traffic asks for, they are quieter than sintered, they produce far less dust, and they are kinder to your discs. Fitment Assembled specifically for the Honda CB350RS. The RS uses its own upswept silencer, which is why this package exists separately. The filter, plug and both sets of pads are common across the whole CB350 family; only the exhaust is variant-specific, and the one included here is the correct unit for your motorcycle. The exhaust is supplied in black as standard, to match the RS’s darker finish. If you would prefer the polished version, message us before ordering and we will swap it at no extra cost. Everything installs with standard tools and no cutting, welding or modification. Your original parts stay usable, so the motorcycle returns to standard whenever you want it to. Worth knowing A fuel or ignition module is not included. The package works well without one, and whether you need it depends on how you ride and where. Ask us and we will tell you honestly. A 13T front sprocket can be sourced separately for riders wanting shorter gearing for hills or heavy city use. It is not held in stock. Message us and we will advise whether it suits how you ride. If you are unsure which variant you own, send us a photograph of the right side of the motorcycle and we will provide fitment guidance before you order.

Read more less

Five upgrades that work together, chosen because they complement one another rather than compete. Built around the H’ness CB350 and its own silencer, so nothing here is a compromise borrowed from another variant. What is in the package Red Rooster Pegasus Slip-On Exhaustthe H’ness-specific unit, stainless, retains the factory header BMC FM01155 Performance Air Filterwashable cotton gauze, drops into the standard airbox NGK Iridium IX CPR8EAIX-9 Spark Plugfine-wire electrode for a more consistent burn NGage HB 089 Whisker Ceramic Brake Pads, front NGage HB 150 Whisker Ceramic Brake Pads, rear Why these five The CB350 is a long-stroke single that does its work between 2,500 and 5,000 rpm. Everything here is chosen to respect that rather than chase a top end the engine was never built to reach. The exhaust is a slip-on that keeps the factory header, which is deliberate. A full system with a larger primary would trade away the low-end torque that makes this engine pleasant. The filter lets it breathe without disturbing the airbox or the sensors inside it. The iridium plug fires more consistently, which matters most when the mixture is working hardest. The ceramic pads are the quiet inclusion that owners tend to appreciate most. They bite well from cold, which is exactly what city traffic asks for, they are quieter than sintered, they produce far less dust, and they are kinder to your discs. Fitment Assembled specifically for the Honda H’ness CB350. The H’ness uses its own upswept silencer, which is why this package exists separately. The filter, plug and both sets of pads are common across the whole CB350 family; only the exhaust is variant-specific, and the one included here is the correct unit for your motorcycle. Everything installs with standard tools and no cutting, welding or modification. Your original parts stay usable, so the motorcycle returns to standard whenever you want it to. Worth knowing A fuel or ignition module is not included. The package works well without one, and whether you need it depends on how you ride and where. Ask us and we will tell you honestly. A 13T front sprocket can be sourced separately for riders wanting shorter gearing for hills or heavy city use. It is not held in stock. Message us and we will advise whether it suits how you ride. If you are unsure which variant you own, send us a photograph of the right side of the motorcycle and we will provide fitment guidance before you order.

Read more less

Five upgrades that work together, chosen because they complement one another rather than compete. This is the package we assembled for a customer running a CB350 at 2,400 metres in Mexico City, refined through the questions he asked along the way. What is in the package BMC FM01155 Performance Air Filterwashable cotton gauze, drops into the standard airbox Red Rooster Pegasus Max Slip-On Exhauststainless, lighter than stock, retains the factory header NGK Iridium IX CPR8EAIX-9 Spark Plugfine-wire electrode for a more consistent burn NGage HB 089 Whisker Ceramic Brake Pads, front NGage HB 150 Whisker Ceramic Brake Pads, rear Why these five The CB350 is a long-stroke single that does its work between 2,500 and 5,000 rpm. Everything here is chosen to respect that rather than chase a top end the engine was never built to reach. The exhaust is a slip-on that keeps the factory header, which is deliberate. A full system with a larger primary would trade away the low-end torque that makes this engine pleasant. The filter lets it breathe without disturbing the airbox or the sensors inside it. The iridium plug fires more consistently, which matters most when the mixture is working hardest. The ceramic pads are the quiet inclusion that owners tend to appreciate most. They bite well from cold, which is exactly what city traffic asks for, they are quieter than sintered, they produce far less dust, and they are kinder to your discs. Fitment Assembled for the Honda CB350, CB350C and CB350 Special Edition. The exhaust is what defines that list. The CB350RS and the H’ness CB350 use a different silencer, so this package will not suit them. Everything else here, the filter, the plug and both sets of pads, is common across the whole CB350 family, so if you ride an RS or an H’ness, message us and we will build you the same package with the correct exhaust for your motorcycle. Everything installs with standard tools and no cutting, welding or modification. Your original parts stay usable, so the motorcycle returns to standard whenever you want it to. Worth knowing A fuel or ignition module is not included. The package works well without one, and whether you need it depends on how you ride and where. Ask us and we will tell you honestly. A 13T front sprocket can be sourced separately for riders wanting shorter gearing for hills or heavy city use. It is not held in stock. Message us and we will advise whether it suits how you ride. If you are unsure which variant you own, send us a photograph of the right side of the motorcycle and we will provide fitment guidance before you order.

Read more less

Barrel Atom for the Royal Enfield Interceptor 650 and GT 650 The Barrel Atom is a slip-on built specifically for the Royal Enfield Interceptor 650 and GT 650. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Royal Enfield Interceptor 650 and GT 650. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue V2 for the Benelli TRK 251 The Barrel Rogue V2 is a slip-on built specifically for the Benelli TRK 251. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Benelli TRK 251. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the KTM 390 Adventure and Enduro S, X and R The Barrel Rogue 2.0 is a slip-on built specifically for the KTM 390 Adventure and Enduro S, X and R. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the KTM 390 Adventure and Enduro S, X and R. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the KTM 250 Adventure and Enduro S, X and R The Barrel Rogue 2.0 is a slip-on built specifically for the KTM 250 Adventure and Enduro S, X and R. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the KTM 250 Adventure and Enduro S, X and R. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Bass Master for the Royal Enfield Interceptor 650 and Continental GT 650 The Barrel Bass Master is a slip-on built specifically for the Royal Enfield Interceptor 650 and Continental GT 650. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Royal Enfield Interceptor 650 and Continental GT 650. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Yezdi Scrambler The Barrel Rogue 2.0 is a slip-on built specifically for the Yezdi Scrambler. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Yezdi Scrambler. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Bass Master for the Royal Enfield Super Meteor 650 The Barrel Bass Master is a slip-on built specifically for the Royal Enfield Super Meteor 650. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Royal Enfield Super Meteor 650. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Bass Master for the Royal Enfield Shotgun 650 The Barrel Bass Master is a slip-on built specifically for the Royal Enfield Shotgun 650. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Royal Enfield Shotgun 650. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Outlaw 2.0 for the Aprilia RS 457 The Barrel Outlaw 2.0 is a full system built specifically for the Aprilia RS 457. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Muffler Position: Side Exit, Underbelly Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Aprilia RS 457. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue for the Husqvarna Svartpilen and Vitpilen The Barrel Rogue is a slip-on built specifically for the Husqvarna Svartpilen and Vitpilen. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel Rogue Version: V1, V2 Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Husqvarna Svartpilen and Vitpilen. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Husqvarna Gen 3 125, 250 and 401 The Barrel Rogue 2.0 is a slip-on built specifically for the Husqvarna Gen 3 125, 250 and 401. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Model: 250 cc, 401 cc, 125 cc Color: Black, Steel Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Husqvarna Gen 3 125, 250 and 401. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Triumph Speed 400 and Scrambler 400X The Barrel Rogue 2.0 is a slip-on built specifically for the Triumph Speed 400 and Scrambler 400X. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel, Black and Steel Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Triumph Speed 400 and Scrambler 400X. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Yamaha Aerox 155 The Barrel Rogue 2.0 is a full system built specifically for the Yamaha Aerox 155. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Oxygen Sensor Port: 1 nos, 2 nos Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Yamaha Aerox 155. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Honda CB 300R The Barrel Rogue 2.0 is a slip-on built specifically for the Honda CB 300R. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Silver Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Honda CB 300R. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Honda CBR 250R The Barrel Rogue 2.0 is a slip-on built specifically for the Honda CBR 250R. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Silver Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Honda CBR 250R. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue 2.0 for the Yamaha R3 The Barrel Rogue 2.0 is a slip-on built specifically for the Yamaha R3. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Yamaha R3. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue for the Kawasaki Ninja 500 The Barrel Rogue is a slip-on built specifically for the Kawasaki Ninja 500. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel Style: Rogue V2 Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Kawasaki Ninja 500. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

Barrel Rogue for the Kawasaki Ninja 250R, 300 and 400 The Barrel Rogue is a slip-on built specifically for the Kawasaki Ninja 250R, 300 and 400. Barrel builds in 304 stainless steel and finishes by hand, and the result is a system that changes the character of the bike without asking for a workshop full of tools to fit. Built to Last 304 stainless steel construction Ceramic insulation rated to 1260 degrees Celsius, no refill needed Corrosion resistant, finished to stay presentable Lighter than the stock system Sound You ControlA removable DB killer is included. Leave it in for a deeper, civil note on the daily commute, take it out for the full open sound. The choice stays with the rider rather than being fixed at the factory. Choose Your Configuration Color: Black, Steel Style: Rogue V2 Before You Order Professional installation recommended Select the correct configuration before checkout Performance exhausts are louder than stock by design Fitment: listed for the Kawasaki Ninja 250R, 300 and 400. If you are unsure which configuration suits your bike or your riding, contact us for fitment guidance before you order. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less