ON SALE | Rawtorque

Brembo 09899811 is a rear-axle brake disc for the Porsche Boxster GTS 981/991 CARRERA & 2 more, measuring 299 mm diameter and 20 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 299 mm Thickness 20 mm Minimum thickness 18 mm Height 67 mm Bolt holes 5 Centering bore 98 mm Disc type Ventilated Axle Rear Units per box 1 EAN code 8020584037041 New thickness is 20 mm and the manufacturer's minimum is 18 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Porsche Boxster GTS 981/991 CARRERA & 2 more. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09D33821 (front, 307 mm diameter) and Brembo 09D11211 (rear, 300 mm diameter) are the OE-specification brake discs for the BMW 3 SERIES G20 320D.Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09D33821 Diameter 307 mm Thickness 24 mm Minimum thickness 22.4 mm Height 66 mm Bolt holes 5 Centering bore 67 mm Disc type Ventilated Units per box 1 EAN code 8020584317433 Rear axle specification, 09D11211 Diameter 300 mm Thickness 20 mm Minimum thickness 18.4 mm Height 64 mm Bolt holes 5 Centering bore 67 mm Disc type Ventilated Units per box 1 EAN code 8020584310632 Measure at the thinnest point across the braking surface: front is 24 mm new against a 22.4 mm minimum, rear is 20 mm new against a 18.4 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the BMW 3 SERIES G20 320D. Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Brembo 09958111 (front, 325 mm diameter) and Brembo 09957311 (rear, 320 mm diameter) are the OE-specification brake discs for the BMW X3 E83 (2004 - 2010).Use the Position selector to choose the axle you need. The Set option covers both axles together.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Front axle specification, 09958111 Diameter 325 mm Thickness 25 mm Minimum thickness 23.4 mm Height 62 mm Bolt holes 5 Centering bore 75 mm Disc type Ventilated Units per box 1 EAN code 8020584025086 Rear axle specification, 09957311 Diameter 320 mm Thickness 22 mm Minimum thickness 20.4 mm Height 80 mm Bolt holes 5 Centering bore 75 mm Disc type Ventilated Units per box 1 EAN code 8020584025116 Measure at the thinnest point across the braking surface: front is 25 mm new against a 23.4 mm minimum, rear is 22 mm new against a 20.4 mm minimum. Once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the BMW X3 E83 (2004 - 2010). Front and rear use different part numbers, and brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Each Position option covers a single axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

BMC FB01092 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01092 is a direct-fit washable performance air filter that fits the Audi RS7 Sportback (2019+). Engine fitments: 4.0 V8.This is a direct replacement for the factory paper element, it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable: clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car, please confirm quantity for your exact variant before ordering.

Read more less

Brembo 09887631 is a rear-axle brake disc for the Landrover DISCOVERY IV (2009 to 2016), Range Rover Sport(2005 - 2013), measuring 350 mm diameter and 20 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 350 mm Thickness 20 mm Minimum thickness 17 mm Height 59 mm Bolt holes 5 Centering bore 79 mm Disc type Ventilated Axle Rear Units per box 1 EAN code 8020584231272 New thickness is 20 mm and the manufacturer's minimum is 17 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Landrover DISCOVERY IV (2009 to 2016), Range Rover Sport(2005 - 2013). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion BLAZE FULL SYSTEM is a full system exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 6 kg. A full system upgrade with a track-tuned growl. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 6 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion BLAZE FULL SYSTEM Type Full System Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 6 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion BLAZE FULL SYSTEM fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

BMC FB01061 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01061 is a direct-fit washable performance air filter that fits the Audi A8 4N 50TDI (2017+). Engine fitments: 3.0 V6.This is a direct replacement for the factory paper element, it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable: clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car, please confirm quantity for your exact variant before ordering.

Read more less

Light that keeps pace with the roadThe Valkyrie is a 4.5 inch auxiliary light built for riders who cover ground after dark. A 120W dual reflector system produces 13,200 lumens at 6000K, throwing a usable beam well beyond the reach of a standard headlight, so a corner arrives with warning rather than surprise.High beam, low beam and an amber DRL switch from the handlebar, letting a single pair serve the night highway, the trail and the daytime commute.The housing is die cast aluminium, sealed to IP68 and rated from -40°C to +80°C. It is built to come through monsoon touring and Himalayan cold without a change in output.Specifications 4.5 inch dual reflector LED 120W total power 13,200 lumens 6000K pure white output High beam, low beam and amber DRL IP68 waterproof and dustproof Die cast aluminium housing Operating voltage 9V to 30V Operating temperature -40°C to +80°C Supplied as a pair with wiring harness and switch Get in touch for fitment guidance on your motorcycle.

Read more less

The Barrel Rogue V1 Exhaust for Bajaj Dominar 400 & 400 UG is built for riders who want a stronger presence on the road without sacrificing reliability or fitment precision. This is not a universal slip-on. It is a model-specific performance system engineered to match the Dominar’s engine characteristics and chassis layout. Designed specifically for the Bajaj Dominar 400 and Dominar 400 UG, the Rogue V1 delivers a deep, bass-heavy exhaust tone with a clean power band. There is no sharp metallic rasp and no hollow drone at cruising speeds. What you get is a fuller, controlled sound that feels muscular without becoming tiring on long rides. Built from Stainless Steel 304 The entire system is manufactured from Stainless Steel 304, chosen for its corrosion resistance and structural durability under heat cycles. Dominar engines generate consistent thermal load, especially on highways. Stainless Steel 304 maintains integrity under repeated heating and cooling, reducing the risk of premature surface corrosion. The welds are clean and structurally reinforced to handle vibration and road stress. This matters on Indian highways where expansion joints, rough patches, and uneven terrain are part of daily riding conditions. The construction is engineered for longevity, not cosmetic appeal alone. Custom Decat Subheader with Inbuilt Resonator A key component of the Rogue V1 system is the custom decat subheader with an integrated resonator. This is not just a pipe replacement. The resonator helps regulate exhaust pulses and smooth out the sound profile across the rev range. By removing the catalytic restriction in the subheader section, exhaust flow becomes more direct. The integrated resonator ensures that the tone remains controlled rather than excessively sharp. The result is improved throttle response feel and a more linear exhaust character during acceleration. This configuration maintains rideability while enhancing the Dominar’s natural torque delivery. Deep, Controlled Acoustic Profile The Rogue V1 is tuned to produce a deep, bass-focused exhaust note. It enhances the Dominar’s character without sounding overly aggressive or artificially loud. At idle, the tone is rich and heavy. Under acceleration, the note builds progressively. At cruising speeds, the sound remains stable without intrusive vibration or cabin-like resonance through the chassis. A removable DB killer is included. This allows riders to manage sound output depending on riding environment or local regulations. With the DB killer installed, the exhaust remains strong yet controlled. Removed, it produces a more open and aggressive tone. Plug-and-Play Fitment Installation is fully plug-and-play. No cutting.No welding.No fabrication adjustments. The Rogue V1 is engineered to align precisely with the Dominar 400 & 400 UG factory mounting points. All brackets and connection points are designed for direct bolt-on compatibility. This ensures structural alignment, prevents unnecessary stress on mounting brackets, and maintains exhaust stability under load. Professional installation is recommended for optimal alignment and torque specification adherence. Performance-Oriented Engineering While this system is primarily acoustic and flow-oriented, riders may notice improved throttle responsiveness due to freer exhaust flow. The system is tuned to complement the Dominar’s engine characteristics without requiring mandatory ECU remapping. The goal is balanced enhancement, stronger character, improved flow feel, and controlled acoustics, without compromising reliability or daily usability. This makes it suitable for: Daily city riding Highway touring Weekend performance riding Long-distance travel Designed & Manufactured in India The Barrel Rogue V1 Exhaust is designed and manufactured in India for Indian riding conditions. Heat, dust, humidity, and inconsistent road surfaces are part of real-world usage. The material choice and structural design reflect that environment. This is not a generic imported system. It is engineered with practical durability in mind. Key Features Specifically designed for Bajaj Dominar 400 & 400 UG Full Stainless Steel 304 construction Custom decat subheader with integrated resonator Deep, bass-oriented exhaust tone Removable DB killer Direct bolt-on plug-and-play fitment Improved throttle response feel Rust-resistant material for long-term durability Made in India What’s Included Rogue V1 Exhaust Muffler Custom Stainless Steel Decat Subheader (with inbuilt resonator) Mounting hardware Removable DB killer Installation Notes Designed only for Bajaj Dominar 400 & 400 UG Direct replacement system Professional installation recommended Ensure correct torque specification during fitment Verify local regulations before removing DB killer We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

HEL Braided Brake Lines for the BMW e46. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HE46Fitment guidance - listed as a fit for:BMW e46Cross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Skoda Slavia/kushaq. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HVIRFitment guidance - listed as a fit for:Skoda Slavia/kushaqCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Vw Virtus/taigun. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HVIRFitment guidance - listed as a fit for:Vw Virtus/taigunCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the VW Jetta 280 frt 272 rear caliper. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HJETFitment guidance - listed as a fit for:VW Jetta 280 frt 272 rear caliperCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Honda Jazz new. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HJAZFitment guidance - listed as a fit for:Honda Jazz newCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Fiat Abarth punto. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HABRFitment guidance - listed as a fit for:Fiat Abarth puntoCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Maruti Baleno RS. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HBRSFitment guidance - listed as a fit for:Maruti Baleno RSCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Skoda rapid/fabia. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HPOLFitment guidance - listed as a fit for:Skoda rapid/fabiaCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Vw polo/vento. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HPOLFitment guidance - listed as a fit for:Vw polo/ventoCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Skoda octavia MK1 vrs. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HPOLFitment guidance - listed as a fit for:Skoda octavia MK1 vrsCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Vw polo gti. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HGTIFitment guidance - listed as a fit for:Vw polo gtiCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Hyundai I20 N line. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HI20Fitment guidance - listed as a fit for:Hyundai I20 N lineCross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less

HEL Braided Brake Lines for the Honda civic gen 8. HEL Performance designs and manufactures its stainless braided lines in Britain, a fixture on race and road cars worldwide.Stainless steel braided hoses replace the flex of rubber lines for a firmer, more consistent pedal and sharper brake feel, wrapped in a protective PVC cover.Pre-order item - supplied genuine by Rawtorque; availability is confirmed after you order.Part numbers NA: HCIVFitment guidance - listed as a fit for:Honda civic gen 8Cross-referenced to Brembo OE numbers. Not sure it's right for your car? Share your VIN and our team will help confirm fitment.

Read more less