Motorcycle | Rawtorque

Heavy-Duty Red Crash Guard for Hero XPulse 200 4V Pro, Engine & Frame Protection The LCB Defender Crash Guard Red for Hero XPulse 200 4V Pro is engineered by Legundary Custom Builds for riders who demand visible strength and structural protection in equal measure. Designed specifically for the XPulse 200 4V Pro platform, this crash guard delivers impact resistance while adding a bold, performance-inspired visual upgrade. Constructed from heavy-duty mild steel and finished in a vibrant red powder coat, the Defender Crash Guard provides structural shielding for the engine and lower frame areas, the components most vulnerable during off-road riding and accidental drops. It combines protective engineering with a factory-aligned fitment profile, ensuring the guard integrates seamlessly into the motorcycle’s existing chassis geometry. This is not ornamental tubing. It is engineered crash protection built for real-world riding conditions. Engine & Frame Impact Protection Adventure motorcycles operate in environments where uneven terrain, rocks, loose gravel, and unexpected slides are common. The lower engine casing and frame sections are particularly exposed during low-speed falls or technical trail maneuvers. The LCB Defender Crash Guard is designed to: • Protect engine casing from direct ground contact• Shield lower frame structure during tip-overs• Reduce impact concentration on vulnerable components• Distribute load across reinforced mounting points By creating a protective buffer zone around critical mechanical areas, the crash guard helps mitigate potential structural damage during trail incidents or urban mishaps. Impact protection performance depends on riding conditions and fall severity. Heavy-Duty Mild Steel Construction The Defender Crash Guard uses high-strength mild steel tubing to balance durability, structural rigidity, and energy absorption. Material advantages include: • High impact resistance• Structural stability under stress• Resistance to bending under moderate load• Long-term durability across mixed terrains Mild steel is commonly selected for crash protection systems because of its ability to absorb impact forces while maintaining structural integrity. The tubular design helps distribute stress more effectively than flat structural components. The construction is engineered to handle vibration and sustained riding loads without premature fatigue. Red Powder-Coated Finish The premium red powder-coated surface adds both durability and visual distinction. Finish characteristics: • Corrosion resistance• Scratch tolerance• Heat stability• Long-lasting color retention The vibrant red tone enhances the XPulse’s off-road personality, giving it a sportier, more aggressive stance. The powder-coating process improves resistance against moisture, dust, and debris exposure. Minor surface wear from trail riding is considered normal and does not impact structural function. Precision Fit for XPulse 200 4V Pro The Defender Crash Guard Red is engineered exclusively for: Hero XPulse 200 4V Pro Fitment features include: • Direct bolt-on installation• No cutting required• No welding required• Alignment with factory mounting points The guard is shaped to maintain proper clearance around engine components while ensuring secure mounting under riding stress. Professional installation is recommended to ensure proper torque specification and correct alignment. Maintains Ride Geometry & Clearance Protection components must not compromise handling or ground clearance. The Defender Crash Guard is designed to: • Preserve lean angle capability• Maintain adequate ground clearance• Avoid interference with suspension movement• Retain natural riding ergonomics While mild steel adds strength, the overall design ensures that weight distribution remains balanced relative to the motorcycle’s chassis layout. Built for Real Riding Conditions The LCB Defender Crash Guard Red is suitable for: • Off-road trail riding• Gravel roads• Adventure touring• Daily commuting• Mixed urban and rural conditions It is ideal for riders who frequently encounter unpredictable surfaces and require added structural confidence. The bold red finish also makes it a visual upgrade for riders who want their protection gear to stand out. Designed to Enhance XPulse Aesthetics The red powder-coated finish complements the XPulse 200 4V Pro’s aggressive bodywork and off-road DNA. The design: • Adds visual depth to the lower frame area• Enhances adventure-focused styling• Maintains a factory-fit integration• Avoids excessive bulk The result is a crash guard that looks intentional rather than aftermarket. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Defender Crash GuardMaterial: Mild SteelFinish: Red Powder-CoatedFitment: Hero XPulse 200 4V ProInstallation: Direct Bolt-On (No Drilling or Welding Required) Important Notes Confirm motorcycle variant before purchase.Professional installation recommended.Surface wear from off-road riding is normal.Ensure all mounting hardware is torqued correctly after installation.

Read more less

The LCB Cosmic Headlight Grill for Hero XPulse 200 4V Pro is engineered for riders who push beyond smooth highways and into unpredictable terrain. The XPulse 200 4V Pro is built for adventure, but its headlight remains exposed to flying gravel, loose stones, trail debris, mud splashes, and sudden impact. This grill is designed to protect that critical lighting unit without affecting beam clarity or factory alignment. Crafted specifically for the Hero XPulse 200 4V Prothis is not a universal headlight guard adapted to fit. The contour follows the exact geometry of the stock headlight housing. Mounting points align precisely with OEM locations. The fit is tight, secure, and structurally stable. Once installed, it feels integrated, not added. Built using a hybrid blend of mild steel and aluminumthe LCB Cosmic Headlight Grill balances rigidity with controlled weight distribution. Mild steel provides structural strength and impact resistance. Aluminum components reduce unnecessary bulk while maintaining durability. This combination ensures the grill withstands vibration, shock loads, uneven terrain, and prolonged riding stress without flexing or distortion. The dual-tone black and silver finish enhances the XPulse’s aggressive adventure styling. The matte black base keeps the front end rugged and stealthy. The silver accents create contrast and highlight the structural detailing. It complements the XPulse 200 4V Pro’s rally-inspired character without overpowering its design language. Protection is the core purpose of the LCB Cosmic Headlight Grill for Hero XPulse 200 4V Pro. It forms a protective barrier against: • Flying gravel on highways• Stone impact during group rides• Branch strikes on forest trails• Mud and debris spray in monsoon conditions• Sudden impact from loose terrain Even with its reinforced structure, the grill maintains optimal headlight beam dispersion. The cut pattern is engineered to prevent beam distortion. Night visibility remains clear and functional. Illumination efficiency is retained while adding physical protection. Installation is direct and modification-free. The bolt-on design uses factory mounting points. No cutting. No drilling. No wiring interference. The geometry ensures that once mounted, the grill sits stable with no rattling under vibration or high-speed riding. Fitment feels factory-finished. Durability matters in Indian riding conditions. The corrosion-resistant coating protects against humidity, rain exposure, dust, and heat cycles. Whether the motorcycle is used for daily commuting, weekend trail riding, or long-distance touring, the finish is built to resist premature wear. Beyond protection, the LCB Cosmic Headlight Grill adds structural presence to the XPulse 200 4V Pro. It strengthens the front fascia visually. It communicates purpose. It signals that the motorcycle is built to be ridden, not just displayed. For adventure riders, headlight damage is more than cosmetic. Replacement assemblies are expensive. A cracked lens compromises night riding safety. Preventive protection is significantly more cost-effective than repair. This grill reduces that risk. The LCB Cosmic Headlight Grill is ideal for: • Off-road riders navigating rocky or forest terrain• Touring riders covering long-distance routes• Urban commuters riding through debris-heavy traffic• XPulse owners upgrading for both protection and aesthetics This component does not interfere with servicing or routine maintenance. It is designed to coexist with stock configuration. That means no compromise on usability. Technical Specifications Product Name: LCB Cosmic Headlight GrillMotorcycle Compatibility: Hero XPulse 200 4V ProMaterial: Mild Steel + Aluminum Hybrid ConstructionFinish: Dual-Tone Black & SilverFitment Type: Direct Bolt-OnInstallation: No modification requiredCorrosion Resistance: Yes What Makes It Different Unlike universal headlight guards, the LCB Cosmic Headlight Grill for Hero XPulse 200 4V Pro is model-engineered. The structural geometry aligns with the stock headlight assembly. Weight distribution is considered. Beam performance is preserved. It delivers protection without compromise. Warranty & Authenticity This product is manufactured by Legundary Custom Builds (LCB) and includes a 6-month manufacturer warranty covering material or manufacturing defects. RawTorque supplies genuine LCB products and assists customers with warranty coordination strictly as per the manufacturer’s policy. RawTorque does not provide independent warranty coverage beyond the brand’s stated terms.

Read more less

Tail Tidy for Hero XPulse 200 BS4 & BS6, Compact Rear Fender Upgrade The LCB Tail Tidy for Hero XPulse 200 is a precision-engineered rear-end upgrade designed by Legundary Custom Builds to replace the bulky stock fender assembly with a cleaner, more compact structure. Built specifically for XPulse 200 BS4 and BS6 models, this tail tidy refines the motorcycle’s rear profile while maintaining structural stability and proper mounting alignment for essential components. The stock rear fender assembly on many dual-sport motorcycles prioritizes practicality but often adds visual bulk. The LCB Tail Tidy streamlines the design without compromising functionality, ensuring your number plate, indicators, and tail light remain securely positioned even during off-road use. This is not just a cosmetic bracket. It is a structural mounting solution engineered for durability. Designed Specifically for Hero XPulse 200 The LCB Tail Tidy is built for: Hero XPulse 200 BS4Hero XPulse 200 BS6 Platform-specific design ensures: • Accurate bolt alignment• Factory mounting compatibility• Correct tail-light positioning• Proper number plate angle retention Because it is model-specific, the installation process remains straightforward and avoids forced fitment or structural modification. Always verify your motorcycle variant before purchase. High-Strength Mild Steel Construction The tail tidy is constructed from durable mild steel to provide structural rigidity and vibration resistance. Material advantages include: • Impact resistance• Structural stability under vibration• Long-term durability• Strength suitable for mixed-terrain riding Unlike lightweight decorative brackets, this steel construction ensures your rear components remain stable even on rough roads and gravel trails. The structural integrity supports consistent alignment of indicators and registration plate under riding stress. Matte Black Powder-Coated Finish The LCB Tail Tidy features a matte black powder-coated finish designed for corrosion resistance and long-term durability. Finish characteristics include: • Rust resistance• Scratch tolerance• UV stability• Factory-style appearance The matte finish integrates seamlessly with the XPulse’s adventure-focused styling, enhancing its aggressive stance without appearing aftermarket-heavy. Minor surface wear over time is normal and does not affect structural performance. Integrated Mounting Design The tail tidy is engineered with integrated mounting points for: • Number plate• Rear indicators• Tail light assembly The design ensures secure component positioning while maintaining a compact rear layout. Key design benefits: • Reduced rear overhang• Cleaner tail section appearance• Maintained legal plate visibility (subject to local regulations)• Stable indicator placement The bracket geometry supports proper spacing without affecting rear suspension clearance. Compact & Minimal Rear Profile One of the primary advantages of the LCB Tail Tidy is the visual refinement it offers. The shorter, compact structure: • Eliminates unnecessary rear bulk• Enhances aggressive styling• Improves visual symmetry• Retains functional mounting It transforms the XPulse’s rear-end appearance into a more streamlined, modern configuration while preserving everyday usability. Direct Bolt-On Installation The LCB Tail Tidy is designed for: • Direct bolt-on fitment• No cutting required• No welding required• No permanent modifications Installation considerations: • Ensure all mounting bolts are tightened to correct torque• Confirm wiring routing for indicators and tail light• Check number plate alignment before final tightening Professional installation is recommended for proper wiring management. Built for Daily & Adventure Riding This tail tidy is suitable for: • Urban commuting• Weekend rides• Off-road exploration• Touring setups• Mixed terrain use Its steel construction ensures stability even when riding on uneven surfaces or vibration-heavy trails. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For full warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Tail TidyMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: Hero XPulse 200 BS4 & BS6Installation: Direct Bolt-On Important Notes Confirm BS4 or BS6 compatibility before purchase.Ensure proper wiring alignment during installation.Professional installation recommended.Check local regulations regarding number plate mounting angles.

Read more less

Headlight Shield for Hero XPulse, Polycarbonate Lens Protection with Steel Frame The LCB Oculus Headlight Shield for Hero XPulse is a precision-engineered protective accessory designed to safeguard your motorcycle’s headlamp assembly against debris, gravel impact, and trail hazards. Developed by Legundary Custom Builds specifically for the XPulse platform, this headlight shield combines structural reinforcement with optical clarity to maintain both safety and lighting performance. Adventure motorcycles frequently encounter loose stones, dust, and unpredictable terrain. The headlight lens, positioned at the front of the motorcycle, is particularly vulnerable to impact. The Oculus Headlight Shield acts as a protective barrier, helping reduce the risk of lens damage without obstructing beam output or visibility. This is functional front-end protection built for real-world riding conditions. Dual-Layer Protection System The Oculus Shield integrates two primary structural components: • Mild steel exoskeleton frame• High-grade transparent polycarbonate shield The mild steel outer frame provides mounting stability and structural support. The polycarbonate insert acts as the primary impact-absorbing layer, designed to resist cracking under debris strike. Polycarbonate is widely used in safety applications due to its high impact resistance and optical transparency. It offers durability without the brittleness associated with standard acrylic materials. Protection performance depends on impact force and riding conditions. Designed for Hero XPulse Platform The LCB Oculus Headlight Shield is engineered specifically for: Hero XPulse (confirm variant compatibility before purchase) Platform-specific design ensures: • Proper alignment with headlamp housing• Factory-style integration• Correct mounting point alignment• No interference with beam pattern Because it is model-specific, installation does not require drilling or permanent modification to the motorcycle. Professional installation is recommended for accurate positioning. Maintains Headlight Clarity & Beam Performance A key consideration in headlight protection systems is maintaining full light output. The Oculus Shield is designed with optical clarity in mind. Benefits include: • Transparent polycarbonate panel• Maintained headlight brightness• Preserved beam projection• No intentional light diffusion The shield does not alter factory beam alignment when properly installed. However, riders should always confirm beam positioning after installation to ensure compliance with road safety standards. Minor dust accumulation on the shield should be cleaned regularly to maintain maximum clarity. Structural Mild Steel Frame The exoskeleton frame is constructed from durable mild steel to provide rigidity and vibration resistance. Material advantages include: • Structural impact support• Resistance to bending under moderate force• Long-term durability• Stability during off-road riding The frame secures the polycarbonate insert in place while distributing impact forces across mounting points. The matte black powder-coated finish enhances corrosion resistance and matches the XPulse’s rugged styling. Lightweight Yet Protective Despite offering reinforced protection, the Oculus Shield maintains a lightweight construction profile. Benefits include: • Minimal added front-end weight• Preserved steering balance• No significant impact on ride dynamics• Maintained suspension behavior The design ensures that added protection does not compromise handling or ergonomics. Built for Mixed Riding Conditions The LCB Oculus Headlight Shield is suitable for: • Off-road trail riding• Gravel roads• Adventure touring• Dust-heavy environments• Urban commuting It helps reduce the likelihood of headlight damage caused by stones and debris thrown up by vehicles or encountered during trail riding. Regular inspection and cleaning are recommended after heavy off-road use. Direct-Fit Installation Installation features: • Direct-fit mounting• No cutting required• No welding required• Uses designated mounting points Installation considerations: • Ensure proper alignment before tightening• Confirm no contact with headlamp lens• Verify beam output after installation Professional installation is recommended to ensure secure fitment and optimal positioning. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For full warranty details, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Oculus Headlight ShieldFrame Material: Mild SteelShield Material: PolycarbonateFinish: Matte Black Frame + Transparent ShieldFitment: Hero XPulseInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Professional installation recommended.Clean shield surface regularly for optimal clarity.Minor cosmetic scratches from debris exposure are normal.

Read more less

Headlight Grill for Hero XPulse, Steel Mesh Front Protection The LCB Headlight Grill for Hero XPulse is a functional front-end protection accessory engineered by Legundary Custom Builds for riders who demand structural durability and purposeful design. Built specifically for the XPulse platform, this grill adds a protective barrier over the headlight assembly while enhancing the motorcycle’s rugged, off-road character. Adventure motorcycles frequently encounter loose gravel, flying debris, and unpredictable terrain. The headlight lens is one of the most exposed components at the front of the motorcycle. The LCB Headlight Grill is designed to help reduce the risk of direct impact damage while maintaining proper light projection and airflow. This is structural metal protection, not a cosmetic overlay. Impact Protection for Real-World Riding When riding off-road or on gravel-heavy roads, stones can be thrown toward the front of the motorcycle. Even minor debris can cause cracks or surface damage to the headlight lens. The LCB Headlight Grill is designed to: • Shield the headlight lens from direct stone strikes• Provide a physical impact barrier• Reduce risk of debris-related damage• Enhance durability during trail riding The grill acts as a first-contact protection layer, absorbing or deflecting impact before it reaches the lens. Protection effectiveness depends on riding conditions and impact force. High-Grade Mild Steel Construction The grill is manufactured using durable mild steel, chosen for its structural strength and long-term reliability. Material advantages include: • High impact resistance• Structural rigidity• Vibration tolerance• Long service life under mixed terrain use Mild steel provides greater structural protection compared to plastic or lightweight decorative covers. The metal construction ensures consistent stability even during rough riding conditions. The design is engineered to withstand vibration without loosening under normal riding loads. Precision Laser-Cut Mesh Design The grill features a laser-cut mesh pattern with a bold crossbar detail, balancing protection and functionality. Design considerations include: • Optimized mesh spacing• Maintained headlight beam projection• Adequate airflow passage• Structural rigidity through crossbar reinforcement The open mesh structure allows light to pass through with minimal obstruction while blocking larger debris. After installation, riders should confirm beam alignment and output for optimal visibility and compliance with local regulations. Black Powder-Coated Finish The LCB Headlight Grill is finished in a matte black powder coat designed for durability and corrosion resistance. Finish characteristics: • Rust resistance• Scratch tolerance• UV stability• Seamless integration with XPulse styling The black finish complements the XPulse’s aggressive adventure look without appearing bulky or oversized. Minor cosmetic wear from debris contact is normal during off-road use and does not affect structural performance. Designed Specifically for Hero XPulse The LCB Headlight Grill is engineered for: Hero XPulse (confirm model variant compatibility before purchase) Fitment features include: • Direct bolt-on installation• No drilling required• Alignment with factory mounting points• Secure mounting structure Platform-specific design ensures correct positioning relative to the headlamp housing. Professional installation is recommended to ensure proper alignment and secure fastening. Maintains Visibility & Airflow The grill is designed to protect without significantly obstructing light output or airflow around the headlight assembly. Benefits include: • Preserved beam pattern (when installed correctly)• Maintained brightness levels• Stable airflow around front assembly• No additional cooling interference Regular cleaning is recommended to prevent dust accumulation within the mesh pattern. Built for Adventure & Urban Riding The LCB Headlight Grill is suitable for: • Off-road trail riding• Gravel roads• Adventure touring• Dust-heavy environments• Daily commuting It provides added confidence during rides where front-end debris exposure is likely. Installation & Maintenance Installation guidelines: • Align grill before tightening bolts• Confirm no direct contact with headlight lens• Verify beam output after installation• Periodically inspect mounting hardware Professional installation is recommended for best results. Routine cleaning helps maintain both appearance and light clarity. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For full warranty terms, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Headlight GrillMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: Hero XPulseInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Professional installation recommended.Regularly clean mesh openings for optimal visibility.Check local regulations regarding headlight accessories.

Read more less

Rear Carrier Plate for Hero XPulse BS4 & BS6, Heavy-Duty Luggage Mount The LCB Carrier Plate for Hero XPulse BS4 and BS6 is engineered by Legundary Custom Builds to enhance the motorcycle’s touring practicality without compromising structural balance. Designed specifically for the XPulse platform, this rear carrier plate provides a stable mounting surface for luggage systems, top boxes, and touring accessories. Adventure motorcycles are built for exploration, but proper load management is essential for safe and stable riding. The LCB Carrier Plate reinforces the rear section with a precision-cut steel base, enabling secure mounting while preserving the bike’s weight distribution and handling characteristics. This is a functional touring upgrade, not a decorative rear panel. Built for Touring & Daily Utility Whether you are planning long-distance rides or daily commuting, secure luggage mounting plays a critical role in rider safety and convenience. The LCB Carrier Plate is designed to: • Provide a stable platform for top boxes• Support soft luggage systems• Distribute load evenly across mounting points• Reduce flex under moderate load conditions Proper load mounting improves overall riding stability and minimizes stress on the rear subframe when used within recommended weight limits. Load capacity depends on riding conditions and luggage system compatibility. Heavy-Duty Mild Steel Construction The carrier plate is constructed from premium mild steel, chosen for structural durability and impact resistance. Material advantages include: • High load-bearing strength• Resistance to deformation• Stability under vibration• Long-term durability in mixed weather conditions Unlike lightweight plastic alternatives, the steel structure provides greater rigidity under touring loads. The laser-cut manufacturing process ensures consistent dimensional accuracy and mounting alignment. Matte Black Powder-Coated Finish The LCB Carrier Plate features a matte black powder-coated finish designed for corrosion resistance and aesthetic integration. Finish characteristics: • Rust resistance• Scratch tolerance• UV stability• Factory-style appearance The black finish blends seamlessly with the XPulse’s adventure-focused styling while maintaining a rugged and purposeful look. Minor surface marks from luggage mounting hardware are normal and do not affect structural performance. Platform-Specific Fitment The carrier plate is engineered specifically for: Hero XPulse 200 BS4Hero XPulse 200 BS6 Fitment features include: • Direct bolt-on installation• Alignment with factory mounting points• No drilling required• No welding required The precision-fit design ensures secure mounting without stressing the subframe or altering the bike’s structural geometry. Professional installation is recommended to ensure proper torque application. Optimized Weight Distribution Load placement on the rear of a motorcycle can affect stability if not properly balanced. The LCB Carrier Plate is designed to: • Maintain centered load positioning• Support stable riding under luggage load• Minimize rear-end sway• Preserve riding ergonomics Even weight distribution improves confidence during long rides and highway cruising. Riders should always adhere to safe load limits recommended by the motorcycle manufacturer. Compatible with Luggage Systems The LCB Carrier Plate is compatible with: • Most universal top box mounting plates• Hard luggage systems• Soft luggage straps and racks Mounting compatibility may vary depending on brand and mounting pattern. Always confirm top box base plate alignment before installation. Designed for Real-World Riding The LCB Carrier Plate is suitable for: • Long-distance touring• Daily commuting• Weekend trips• Adventure travel• Mixed terrain riding Its steel construction ensures durability even when exposed to vibration-heavy roads or uneven terrain. Installation & Usage Guidelines Installation considerations: • Confirm mounting bolt alignment• Torque hardware to recommended specification• Inspect mounting points periodically• Avoid exceeding recommended weight limits Professional installation is recommended for optimal safety and performance. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Carrier PlateMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: Hero XPulse BS4 & BS6Application: Rear Luggage MountInstallation: Direct Bolt-On Important Notes Confirm BS4 or BS6 compatibility before purchase.Do not exceed recommended load limits.Professional installation recommended.Periodically inspect mounting hardware during long tours.

Read more less

Small Rear Carrier Plate for Hero XPulse, Compact Luggage Mount The LCB Small Carrier Plate for Hero XPulse is a compact, precision-engineered luggage mounting solution developed by Legundary Custom Builds for riders who prefer minimal bulk without sacrificing practicality. Designed specifically for the XPulse platform, this smaller-format carrier plate offers a sturdy base for mounting lightweight luggage while preserving maneuverability and rear-end aesthetics. Unlike larger touring racks, the Small Carrier Plate focuses on controlled load support for city commuting and short-distance rides. It delivers structural strength within a reduced footprint, making it ideal for riders who want functionality without the visual weight of a full-size carrier. This is a purpose-built utility upgrade for balanced everyday use. Designed for Hero XPulse Platform The LCB Small Carrier Plate is engineered for: Hero XPulse (confirm specific variant compatibility before purchase) Platform-specific design ensures: • Proper alignment with factory mounting points• Accurate bolt positioning• Seamless rear integration• No structural modification required Because it is built specifically for the XPulse chassis, installation remains straightforward and secure. Professional installation is recommended to ensure correct torque application. Compact Yet Load-Capable Although smaller in size compared to full carrier plates, this version is engineered to handle practical luggage requirements. It is suitable for: • Small top boxes• Duffel bags• Daily commute luggage• Compact touring setups The design focuses on: • Balanced load placement• Reduced rear overhang• Maintained riding stability• Controlled weight distribution Load performance depends on mounting hardware and riding conditions. Riders should adhere to safe load limits recommended by the motorcycle manufacturer. High-Strength Mild Steel Construction The carrier plate is constructed from laser-cut mild steel for structural integrity and durability. Material advantages include: • High tensile strength• Resistance to deformation• Stability under vibration• Long service life Mild steel is selected for its load-bearing capability and ability to withstand road and trail vibrations without structural fatigue. The precision laser-cut manufacturing process ensures dimensional accuracy and consistent mounting alignment. Matte Black Powder-Coated Finish The carrier features a matte black powder-coated surface for corrosion resistance and long-term durability. Finish characteristics: • Rust resistance• Scratch tolerance• UV stability• Factory-style aesthetic The matte black tone blends seamlessly with the XPulse’s rugged styling while maintaining a clean, minimal appearance. Minor cosmetic wear from luggage mounting is normal and does not affect structural strength. Preserves Riding Balance One of the advantages of a smaller carrier plate is reduced rear mass. The LCB Small Carrier Plate is designed to: • Maintain handling balance• Avoid excessive rear weight bias• Preserve cornering stability• Support comfortable commuting ergonomics By limiting surface area while retaining structural strength, the design ensures the bike remains agile in urban traffic and tight trail environments. Direct Bolt-On Installation Installation features include: • Direct-fit bolt-on design• No drilling required• No welding required• Includes mounting hardware Installation considerations: • Ensure proper torque on mounting bolts• Confirm secure luggage mounting• Periodically inspect hardware for tightness Professional installation is recommended for best results. Ideal for Everyday Utility The LCB Small Carrier Plate is suitable for: • Daily commuting• Short-distance touring• Weekend rides• City errands• Lightweight adventure setups It offers practical carrying capability without altering the motorcycle’s visual proportions. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Small Carrier PlateMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: Hero XPulseApplication: Rear Luggage MountInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Do not exceed recommended load limits.Professional installation recommended.Inspect mounting hardware periodically during use.

Read more less

Big Rear Carrier Plate for Hero XPulse, Heavy-Duty Touring Luggage Mount The LCB Big Carrier Plate for Hero XPulse is engineered by Legundary Custom Builds for riders who demand maximum luggage support for extended touring and heavy-duty use. Designed specifically for the XPulse platform, this larger-format rear carrier provides a broad, reinforced mounting surface for top boxes, duffel bags, and touring equipment. Adventure touring requires reliable load management. A properly engineered carrier ensures stability under weight while preserving chassis balance. The LCB Big Carrier Plate is built to provide structural strength, precision alignment, and dependable performance under heavier luggage setups. This is a functional touring upgrade designed for riders who travel prepared. Built for Long-Distance Touring The Big Carrier Plate is ideal for riders who carry substantial luggage during: • Multi-day touring• Highway expeditions• Weekend adventure trips• Camping setups• Mixed terrain travel Its wide surface area allows for better luggage positioning and improved tie-down stability. A broader base provides flexibility when mounting large top boxes or securing oversized duffel bags. Load capacity depends on riding conditions and subframe limitations. Riders should always follow safe load guidelines recommended by the motorcycle manufacturer. Heavy-Duty Mild Steel Construction The carrier plate is manufactured from premium mild steel using precision laser-cut technology. Material advantages include: • High load-bearing strength• Structural rigidity under heavy weight• Resistance to flexing• Durability under vibration Mild steel offers excellent strength-to-cost balance while providing long-term reliability under touring stress. The laser-cut manufacturing process ensures consistent dimensional accuracy and clean mounting alignment. Wide Surface Area for Stability The larger design of the Big Carrier Plate offers: • Improved luggage footprint• Enhanced load distribution• Reduced rear-end sway• Better tie-down flexibility The wider platform allows luggage straps to be positioned securely, minimizing shifting during acceleration, braking, or uneven terrain riding. Properly distributed load improves riding confidence and stability during long-distance travel. Matte Black Powder-Coated Finish The carrier features a matte black powder-coated finish designed for corrosion resistance and rugged aesthetics. Finish characteristics: • Rust resistance• Scratch tolerance• UV durability• Seamless factory-style integration The matte black surface complements the XPulse’s adventure-ready styling while maintaining a professional, purpose-built look. Minor cosmetic wear from luggage mounting hardware is normal and does not affect structural integrity. Platform-Specific Precision Fitment The LCB Big Carrier Plate is designed specifically for: Hero XPulse Fitment features include: • Direct bolt-on installation• Alignment with factory mounting points• No drilling required• No welding required The precision-fit design ensures secure mounting without stressing the rear subframe or altering the motorcycle’s geometry. Professional installation is recommended to ensure proper torque application. Compatible with Touring Systems The Big Carrier Plate is compatible with: • Most aftermarket top box mounting plates• Hard luggage systems• Soft luggage strap systems• Adventure touring setups Compatibility may vary depending on mounting pattern and hardware configuration. Always confirm fitment before installation. Preserves Riding Stability Despite its larger footprint, the Big Carrier Plate is engineered to: • Maintain rear-end balance• Support stable handling under load• Minimize flex under touring weight• Preserve rider comfort Correct load positioning is critical. Riders should avoid exceeding recommended weight limits and ensure luggage is evenly distributed. Installation & Maintenance Guidelines Installation considerations: • Confirm correct bolt alignment before tightening• Torque mounting hardware to specification• Inspect mounting bolts periodically• Check luggage strap tension before long rides Professional installation is recommended for optimal safety. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty details, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Big Carrier PlateMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: Hero XPulseApplication: Rear Luggage MountInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Do not exceed recommended load capacity.Professional installation recommended.Periodically inspect mounting hardware during long-distance travel.

Read more less

Pillion Backrest for Hero XPulse, Touring Comfort & Support Upgrade The LCB XPulse Backrest is a purpose-built comfort upgrade designed by Legundary Custom Builds for riders who frequently travel with a pillion. Engineered specifically for the Hero XPulse platform, this backrest enhances rear-seat support while preserving the motorcycle’s rugged, adventure-focused styling. Adventure motorcycles are often built for versatility, but extended two-up riding demands additional ergonomic support. The LCB Backrest provides structured lumbar support for the pillion without adding excessive bulk or compromising rear aesthetics. It integrates cleanly with the XPulse’s silhouette while delivering practical touring comfort. This is not an oversized touring attachment. It is a compact structural support system designed for real-world riding. Designed for Hero XPulse Platform The LCB Backrest is custom-engineered for: Hero XPulse (confirm specific variant compatibility before purchase) Platform-specific fitment ensures: • Accurate mounting alignment• Proper seat positioning• Secure frame integration• No structural modification required The design maintains factory mounting geometry while ensuring a stable and balanced installation. Professional installation is recommended for optimal alignment and safety. Structural Mild Steel Frame The backrest frame is constructed from high-strength mild steel to provide rigidity and long-term durability. Material advantages include: • Strong load-bearing capacity• Resistance to vibration fatigue• Structural stability under passenger weight• Long service life Mild steel is selected for its ability to withstand repeated stress cycles encountered during touring and uneven terrain riding. The frame design ensures that load forces are distributed properly without placing undue strain on mounting points. Premium Rexine Upholstery & Cushioning Comfort is delivered through a padded backrest cushion finished in high-quality rexine. Comfort features include: • Medium-density foam core• Balanced firmness for lumbar support• Resistance to deformation over time• Easy surface cleaning The medium-density foam provides structured support without being overly soft, ensuring comfort even during extended rides across rough surfaces. The rexine covering offers durability and resistance to wear from regular passenger use. Ergonomic Support Design The backrest is shaped to provide: • Proper lower-back support• Increased passenger confidence• Reduced fatigue on long rides• Stable seating posture By offering a secure resting point for the pillion, the backrest enhances overall riding comfort and reduces strain during acceleration or uneven terrain transitions. Passenger comfort levels may vary depending on riding posture and duration. Matte Black Powder-Coated Finish The frame features a corrosion-resistant matte black powder coating. Finish characteristics: • Rust resistance• Scratch tolerance• UV stability• Seamless aesthetic integration The black finish blends with the XPulse’s rugged adventure styling, ensuring the backrest appears factory-integrated rather than aftermarket-heavy. Minor cosmetic wear from regular use is normal and does not affect structural performance. Compact & Balanced Styling Unlike oversized touring backrests, the LCB XPulse Backrest is designed to: • Maintain the motorcycle’s clean rear profile• Avoid excessive visual bulk• Complement existing carrier plates• Preserve adventure aesthetics Its compact design ensures that the XPulse retains its agile look while gaining additional passenger support. Direct Bolt-On Installation Installation features include: • Direct bolt-on mounting• No drilling required• No welding required• Alignment with factory mounting points Installation considerations: • Confirm secure bolt tightening• Verify alignment with rear seat• Inspect mounting hardware periodically Professional installation is recommended for best results. Ideal for Two-Up Riding The LCB XPulse Backrest is suitable for: • Daily commuting with a passenger• Weekend rides• Long-distance touring• Mixed terrain exploration It provides added security and comfort for pillion riders during both urban and off-road travel. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: XPulse BackrestFrame Material: Mild SteelCushion Material: Medium-Density FoamUpholstery: RexineFinish: Matte Black Powder-CoatedFitment: Hero XPulseInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Professional installation recommended.Periodically inspect mounting hardware.Clean rexine surface with non-abrasive cleaners.

Read more less

Saddle Stay for Hero XPulse, Heavy-Duty Xtruder Luggage Support The LCB Xtruder Saddle Stay for Hero XPulse is a structural luggage support system engineered by Legundary Custom Builds to provide secure, balanced mounting for saddlebags during long-distance touring and rugged adventure riding. Designed specifically for the XPulse platform, this saddle stay enhances load stability while protecting both the motorcycle and luggage from unwanted movement or heat exposure. Adventure riding often demands carrying additional gear across uneven terrain, highways, and extended travel routes. Without proper side support, saddlebags can shift, vibrate excessively, or make contact with the exhaust. The LCB Xtruder Saddle Stay addresses these concerns through reinforced tubing construction and a stable three-point mounting architecture. This is a functional touring accessory built for load control and structural reliability. Engineered Specifically for Hero XPulse The Xtruder Saddle Stay is designed exclusively for: Hero XPulse (confirm variant compatibility before purchase) Platform-specific engineering ensures: • Accurate mounting alignment• Proper saddlebag clearance• Stable exhaust-side protection• No frame modification required Because it is built around the XPulse chassis geometry, installation remains precise and structurally secure. Professional installation is recommended to ensure proper torque settings. Heavy-Duty Mild Steel Construction The Xtruder Stay is constructed using high-quality mild steel tubing for enhanced durability and load-bearing capability. Material advantages include: • High structural rigidity• Resistance to bending under load• Stability during vibration• Long-term durability in mixed terrain use Mild steel is commonly used in load-support accessories due to its strength and predictable structural behavior under stress. The tubular construction distributes luggage weight effectively while minimizing flex during uneven riding conditions. 3-Point Mounting System for Stability A key feature of the Xtruder Saddle Stay is its reinforced three-point mounting system. Benefits of the 3-point design: • Improved load distribution• Reduced vibration movement• Enhanced structural stability• Secure alignment under touring weight The three-point configuration anchors the saddle stay to multiple mounting locations, reducing torsional stress and increasing confidence during high-speed or off-road riding. Load stability depends on correct installation and proper luggage fastening. Integrated Exhaust Shield Protection The saddle stay includes a protective shield designed to prevent saddlebags from contacting the exhaust. This feature: • Reduces heat exposure to luggage• Prevents fabric damage• Maintains safe clearance• Enhances touring safety Exhaust heat can compromise soft luggage over time. The integrated shield acts as a barrier, helping preserve both luggage integrity and passenger safety. Matte Black Powder-Coated Finish The Xtruder Saddle Stay features a matte black powder-coated surface for corrosion resistance and aesthetic integration. Finish characteristics: • Rust resistance• Scratch tolerance• UV durability• Factory-style visual match The matte black finish complements the XPulse’s adventure styling while maintaining a professional, purpose-built appearance. Minor cosmetic wear from luggage strap contact is normal and does not affect structural integrity. Optimized Luggage Positioning The Xtruder Stay is ergonomically designed to support proper luggage placement. Design advantages include: • Balanced weight positioning• Reduced rear swing• Improved riding stability• Maintained passenger clearance Correct luggage alignment improves overall handling during loaded touring and minimizes imbalance during cornering. Riders should avoid exceeding recommended load limits set by the motorcycle manufacturer. Direct Bolt-On Installation Installation features include: • Direct-fit bolt-on design• No drilling required• No welding required• Includes necessary mounting hardware Installation considerations: • Confirm bolt torque after initial ride• Ensure saddlebags are securely fastened• Periodically inspect mounting points Professional installation is recommended for optimal safety and performance. Ideal for Touring & Adventure Use The LCB Xtruder Saddle Stay is suitable for: • Long-distance touring• Adventure expeditions• Weekend trips• Highway cruising• Mixed terrain travel It is engineered for riders who require dependable side luggage support without compromising durability or style. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty details, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Xtruder Saddle StayMaterial: Mild SteelFinish: Matte Black Powder-CoatedMounting System: 3-Point SupportFitment: Hero XPulseInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Do not exceed recommended load capacity.Professional installation recommended.Inspect mounting hardware regularly during extended touring.

Read more less

Front Number Plate Holder for KTM Adventure 390, Steel Brooch Mount The LCB Brooch Number Plate Holder for KTM Adventure 390 is a precision-engineered front mounting solution developed by Legundary Custom Builds for riders who demand both structural reliability and refined aesthetics. Designed specifically for the KTM Adventure 390 platform, this holder ensures secure number plate placement while preserving the motorcycle’s aggressive, adventure-focused styling. Adventure motorcycles are exposed to wind pressure, vibration, uneven terrain, and high-speed riding conditions. A poorly mounted number plate can rattle, bend, or misalign over time. The LCB Brooch Number Plate Holder is engineered to provide stable support under varied riding conditions while maintaining clean front-end integration. This is a functional mounting bracket designed for durability, not a decorative accessory. Platform-Specific Engineering The LCB Brooch Holder is designed exclusively for: KTM Adventure 390 Platform-specific design ensures: • Accurate bolt alignment• Correct radiator clearance• Stable front positioning• No structural modification required Because it is built around the KTM Adventure 390’s front geometry, installation is straightforward and maintains factory mounting integrity. Professional installation is recommended to ensure secure fitment. Heavy-Duty Mild Steel Construction The Brooch Holder is fabricated from high-grade mild steel to ensure structural rigidity and long-term durability. Material advantages include: • High resistance to bending• Stability under vibration• Strong load support• Long-term durability in mixed conditions Mild steel provides reliable strength while maintaining predictable performance under road and trail stress. The bracket’s construction helps prevent plate flutter at higher speeds. Matte Black Powder-Coated Finish The number plate holder features a matte black powder-coated surface designed for corrosion resistance and visual integration. Finish characteristics: • Rust resistance• Scratch tolerance• UV stability• Factory-style aesthetic match The matte black tone complements the KTM Adventure 390’s rugged styling without appearing bulky or intrusive. Minor surface wear over time is normal and does not impact structural integrity. Secure & Stable Mounting The LCB Brooch Number Plate Holder is engineered to: • Keep number plate firmly mounted• Reduce vibration movement• Minimize bending under wind pressure• Maintain alignment during high-speed riding Secure plate positioning enhances road compliance and prevents rattling during uneven terrain riding. Plate stability depends on proper installation and fastening. Aerodynamic & Streamlined Design Unlike oversized mounting brackets, the Brooch Holder is designed to maintain airflow and front-end balance. Design advantages include: • Minimal obstruction to radiator airflow• Reduced wind drag• Clean frontal profile• Maintained adventure styling The streamlined bracket design supports cooling efficiency by avoiding unnecessary airflow blockage. After installation, riders should confirm that radiator airflow remains unobstructed. Direct Bolt-On Installation Installation features: • Direct-fit bolt-on design• No drilling required• No welding required• Includes necessary mounting hardware Installation considerations: • Align bracket before tightening• Confirm plate sits centered• Ensure hardware is torqued properly• Periodically inspect mounting bolts Professional installation is recommended for optimal results. Built for Touring & Off-Road Use The LCB Brooch Number Plate Holder is suitable for: • Highway touring• Off-road exploration• Gravel and trail riding• Daily commuting• Adventure travel Its rigid construction ensures dependable performance across varied riding conditions. Warranty & Manufacturer Policy This product includes a 6-month manufacturer warranty from Legundary Custom Builds covering manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s stated policy. For complete warranty terms and conditions, refer to the official Warranty Policy. Technical Overview Brand: Legundary Custom Builds (LCB)Model: Brooch Number Plate HolderMaterial: Mild SteelFinish: Matte Black Powder-CoatedFitment: KTM Adventure 390Application: Front Number Plate MountInstallation: Direct Bolt-On Important Notes Confirm motorcycle compatibility before purchase.Professional installation recommended.Ensure number plate positioning complies with local regulations.Inspect mounting hardware periodically.

Read more less

LCB Calx Side Stand Base | KTM Adventure 390 The LCB Calx Side Stand Base is the essential stability upgrade your KTM Adventure 390 needs for all-terrain parking. Built for serious riders who face unpredictable ground conditions, this precision-engineered side stand base keeps your bike stable on soft soil, gravel, or uneven surfaces, no more worrying about your bike tipping over during breaks. Constructed with a three-part design using high-quality stainless steel and CNC precision cuttingthe Calx Base provides superior grip and balance by increasing your stand’s footprint. Its corrosion-resistant finish ensures long-lasting performance, while the dual-tone metal texture adds a refined, rugged look that matches the ADV’s premium appeal. Direct-fit installation means no drilling or modifications, simply bolt it on and ride with confidence wherever the terrain takes you. Key Features: Compatible with KTM Adventure 390 Stainless steel construction for long-term durability CNC-machined three-piece design for enhanced stability Wide footprint prevents the bike from sinking on soft terrain Corrosion and weather-resistant surface finish Quick and easy bolt-on fitment with precision alignment Warranty:This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to our Warranty Policy.

Read more less

Pillion Backrest for KTM Adventure 390, Long-Distance Touring Comfort Upgrade The LCB Backrest for KTM Adventure 390 is engineered for riders who tour with intent and passengers who expect proper support over long distances. Designed exclusively for the Adventure 390 platform, this backrest enhances pillion stability while maintaining the aggressive, purpose-built styling of KTM’s adventure machine. On short rides, comfort feels optional. On long rides, it becomes critical. Without structured lower-back support, a pillion constantly shifts under acceleration, braking, and uneven terrain. Over time, that movement leads to fatigue, discomfort, and reduced ride confidence. The LCB Backrest solves that problem directly by providing firm, ergonomic lumbar support without turning your ADV into a bulky touring rig. The mounting structure is built from high-grade mild steel, forming a rigid base capable of handling vibration, trail chatter, and sustained highway use. Adventure motorcycles are not garage queens. They see broken roads, gravel, off-road sections, and fully loaded touring conditions. The structural design of this backrest is built around that reality. The steel frame is finished in a corrosion-resistant coating engineered to withstand rain, dust, humidity, and temperature variation. Whether the motorcycle is parked outdoors or ridden across varied climates, the protective finish helps prevent premature wear or surface rust. At the contact point, the backrest features premium rexine upholstery layered over a medium-density foam cushion. The foam density is intentionally balanced. Too soft, and it compresses under sustained load. Too hard, and it becomes uncomfortable after an hour on the saddle. This cushion is tuned to provide stable, supportive resistance without creating pressure points during extended rides. The ergonomic contour follows the natural curve of the lower back, encouraging better posture for the pillion. Improved posture translates to reduced fatigue, especially during long highway stretches or uneven terrain. The added support also increases stability during acceleration and braking, helping the passenger remain more secure without constantly bracing. Unlike oversized touring backrests that visually overpower the motorcycle, the LCB unit is compact and proportioned specifically for the KTM Adventure 390. It integrates cleanly with the rear subframe and complements the ADV’s sharp, functional silhouette. The goal here is enhancement, not aesthetic disruption. Installation is direct bolt-on. No welding. No cutting. No permanent modification. The mounting points align with the motorcycle’s existing architecture to ensure a clean, factory-style finish once installed. This preserves structural integrity and resale value while simplifying fitment. The backrest is also designed to work alongside common touring setups. It does not interfere with top racks, saddle stays, or luggage mounting systems when installed correctly. Riders who frequently travel two-up with luggage will appreciate the added confidence and passenger stability this provides. For riders who tour regularly with a pillion, this upgrade moves from convenience to necessity. Passenger comfort directly affects ride quality, trip endurance, and overall travel experience. When the pillion is supported, the entire ride feels more controlled and less fatiguing. This is not a cosmetic accessory. It is a functional touring enhancement built for real-world usage. Key Features Designed exclusively for KTM Adventure 390 High-grade mild steel frame for structural strength Premium rexine upholstery for durability and weather resistance Medium-density foam cushion for balanced long-distance comfort Corrosion-resistant finish for all-weather reliability Compact, ergonomic design that preserves ADV styling Direct bolt-on installation with no modification required Construction Overview Frame Material: Mild SteelCushion Material: Rexine with medium-density foamFinish: Corrosion-resistant coatingFitment: KTM Adventure 390Installation: Direct bolt-on Why This Upgrade Matters Adventure motorcycles are designed for distance. Passenger comfort determines how far you can realistically travel without frequent stops. Proper lumbar support reduces muscle strain, improves posture, and increases long-ride endurance. The LCB Backrest strengthens your KTM Adventure 390’s touring capability without altering its character. It adds support, not bulk. Stability, not clutter. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Engine & Underbody Bash Plate for KTM Adventure 390 The LCB Crater Bash Plate for KTM Adventure 390 is engineered for riders who push their machine beyond smooth highways and into real-world adventure terrain. Built to absorb impact before it reaches critical components, this dual-material bash plate shields the engine casing, exhaust routing, sump area, and lower frame rails from rocks, debris, and unexpected trail impacts. Adventure motorcycles are designed to explore, but the stock underbody protection is often minimal. Loose stones, broken tarmac edges, hard landings, and gravel kickback can expose vulnerable mechanical parts. A single impact to the crankcase or exhaust header can result in costly repairs or a stranded ride. The Crater Bash Plate functions as structural insurance, distributing impact force and protecting what matters most. Dual-Material Structural Engineering The Crater Bash Plate uses a calculated combination of high-grade aluminum and reinforced mild steel. Aluminum Layer: Lightweight, corrosion-resistant, and capable of dispersing impact energy across a wider surface. Mild Steel Reinforcement: Adds rigidity in high-stress mounting zones and structural anchor points. This hybrid construction balances durability and weight management. Heavy enough to protect. Light enough to avoid compromising handling or front-end balance. Adventure motorcycles demand weight efficiency. Excess weight at the lower frame affects maneuverability during technical riding. The Crater Bash Plate maintains protective strength without creating unnecessary bulk. Impact Absorption & Load Distribution When a bash plate takes a hit, the real function is not just to block impact, it must distribute force correctly. Poorly designed plates concentrate force into mounting bolts or frame tabs. The Crater design supports: Even force distribution across mounting points Reinforced load-bearing zones Stable fitment under vibration Reduced risk of stress fractures Whether you’re riding rocky climbs, descending uneven trails, or crossing debris-strewn highways, the structure remains stable under repeated shock loads. Intelligent Ventilation & Cooling Flow Protection cannot come at the cost of overheating. Some solid bash plates restrict airflow and trap heat near the engine and exhaust system. The Crater Bash Plate incorporates controlled venting zones that: Maintain airflow toward engine surfaces Allow heat dissipation around exhaust routing Reduce heat buildup during slow off-road riding Support stable engine operating temperature This balance ensures protection without compromising mechanical efficiency. Corrosion Resistance & Surface Treatment Adventure riding exposes underbody components to: Mud Water crossings Road salt Dust accumulation Heat cycling The smooth surface treatment enhances durability and reduces dirt adhesion. Combined with corrosion-resistant finishing, the plate maintains structural integrity and appearance over long-term use. It is built to handle rain, humidity, dust, and thermal stress without premature surface degradation. Precision Fitment for KTM Adventure 390 This bash plate is designed specifically for the KTM Adventure 390 chassis. It aligns with factory mounting locations to ensure: Correct geometry Secure load-bearing fitment No interference with exhaust routing Proper ground clearance retention Installation is direct bolt-on. No cutting.No drilling.No structural modification. Once mounted, it integrates cleanly with the ADV390’s aggressive design language, reinforcing its off-road capability visually and functionally. Real-World Use Case If you ride your KTM Adventure 390 purely in urban traffic, this is a protective upgrade.If you ride it on broken roads, gravel stretches, or long-distance tours, this becomes essential equipment. Underbody protection increases confidence. Confidence changes riding behavior. Riders push less cautiously when they know critical components are shielded. This is not decorative armor. It is mechanical risk mitigation. Key Features Designed specifically for KTM Adventure 390 Dual-material construction: high-grade aluminum + mild steel Maximum underbody protection for engine, exhaust, and lower frame Reinforced load-bearing mounting structure Corrosion-resistant surface treatment Engineered airflow vents for cooling efficiency Direct bolt-on installation, no modification required Dual-tone finish for premium adventure styling Construction Overview Material: High-grade aluminum with mild steel reinforcementFinish: Corrosion-resistant smooth surface treatmentFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Engine and underbody protection Why This Upgrade Matters Adventure motorcycles are exposed machines. The sump, exhaust headers, and frame rails sit directly in impact zones. A properly engineered bash plate reduces repair risk, protects structural integrity, and increases long-term reliability. The LCB Crater Bash Plate strengthens the KTM Adventure 390’s defensive architecture without affecting ride dynamics. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Radiator Protection Grill for KTM Adventure 390 The LCB Sherpa Radiator Grill for KTM Adventure 390 is engineered for riders who understand one simple reality: a vulnerable radiator can end a ride instantly. Built to defend against stones, gravel spray, trail debris, and high-speed road impact, this precision-crafted grill adds structural protection without compromising airflow or aesthetics. Adventure motorcycles are designed for unpredictable terrain. The front wheel constantly throws debris upward. At highway speeds, even small stones can damage delicate radiator fins. Off-road riding increases that risk dramatically. A punctured radiator core means coolant loss, overheating, and potential engine damage. The Sherpa Radiator Grill acts as a defensive barrier between the outside world and one of your engine’s most critical cooling components. Dual-Material Structural Design The Sherpa Grill uses a hybrid construction of mild steel and aluminum to balance strength and weight efficiency. Mild Steel Framework: Provides rigidity, impact resistance, and mounting stability. Aluminum Panel Structure: Reduces overall weight while maintaining structural integrity. This combination ensures durability without adding unnecessary front-end mass that could affect steering balance. Adventure bikes need protective upgrades that don’t compromise handling. The Sherpa Grill maintains that balance. Geometric Airflow Optimization Protection alone is not enough. A radiator guard must preserve airflow efficiency to prevent overheating. The Sherpa Grill features a precision-engineered geometric pattern designed to: Deflect stones and debris Allow uninterrupted airflow to radiator fins Maintain cooling efficiency at low and high speeds Reduce the risk of airflow blockage The cut pattern is calculated to maximize open surface area while retaining structural density. This ensures your KTM Adventure 390 maintains stable engine temperatures during city traffic, slow technical riding, and long highway runs. Corrosion-Resistant Matte Finish Adventure motorcycles face harsh exposure: Rain Mud Dust Road salt Heat cycling The matte black powder-coated finish enhances corrosion resistance and long-term durability. It protects against surface oxidation and maintains a clean appearance even after repeated exposure to off-road environments. Visually, the finish complements the KTM Adventure 390’s aggressive design language. It integrates seamlessly without looking like an aftermarket add-on. Structural Protection Without Visual Clutter Many radiator grills look bulky or disrupt factory styling. The Sherpa Radiator Grill is proportioned specifically for the KTM Adventure 390 chassis. It: Follows the natural radiator contour Preserves factory body lines Enhances front-end aggression Maintains OEM-like visual integration The result is protection that looks intentional, not improvised. Direct Bolt-On Installation Fitment matters. Improperly mounted radiator guards can vibrate, shift, or stress mounting points. The Sherpa Grill is engineered for: Direct alignment with factory mounting locations Secure bolt-on installation No cutting or drilling No structural modifications Once installed, it remains stable under vibration and sustained riding conditions. This preserves structural integrity and ensures a professional finish. Real-World Riding Impact Radiator damage is not theoretical. Even urban riders face debris kickback from traffic. Off-road riders encounter stones, gravel bursts, and unpredictable terrain hazards. This grill functions as preventative protection. Instead of repairing bent fins or replacing a damaged radiator assembly, riders install a protective barrier upfront. Protection increases reliability. Reliability increases confidence. And confidence changes how you ride. Key Features Designed specifically for KTM Adventure 390 Hybrid mild steel + aluminum construction Protects radiator from stones, gravel, and debris Optimized geometric pattern for airflow retention Matte black powder-coated finish for corrosion resistance Maintains factory cooling efficiency Direct bolt-on installation with no modification required Construction Overview Material: Mild steel framework with aluminum panelFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Radiator protection Why Radiator Protection Matters The radiator regulates engine temperature. Damage to this system affects performance and reliability immediately. Preventative protection reduces mechanical risk, especially in adventure riding conditions. The LCB Sherpa Radiator Grill reinforces the KTM Adventure 390’s cooling defense without altering its ride dynamics or visual identity. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Rear Luggage Carrier for KTM Adventure 390 The LCB Haulier Rear Carrier for KTM Adventure 390 is engineered for riders who treat distance as routine. Designed to increase luggage capacity without compromising structural balance or riding dynamics, this rear carrier transforms your ADV 390 into a fully capable touring platform. Adventure motorcycles are built for movement, highways, mountain passes, gravel roads, and long intercity runs. But range means nothing without cargo capability. A poorly designed carrier shifts weight awkwardly, stresses the subframe, or interferes with handling. The Haulier Carrier is built to solve those problems with controlled load distribution and structural rigidity. Structural Engineering & Material Composition The Haulier Rear Carrier uses a hybrid construction approach: Primary Frame: High-quality mild steel for structural strength Reinforcement Zones: Aluminum sections for weight control and rigidity Mild steel provides dependable load-bearing capacity and resistance against flex under stress. Aluminum reinforcement reduces unnecessary mass while supporting high-contact mounting zones. This balance ensures durability without turning the rear section into a heavy overhang that disrupts the motorcycle’s center of gravity. Adventure bikes rely heavily on rear load balance. Excessive rear bias can alter braking stability and cornering response. The Haulier Carrier is engineered to maintain proper weight alignment. Close-to-Chassis Load Positioning One of the most overlooked aspects of luggage carriers is load placement geometry. The Haulier Carrier sits close to the chassis and subframe. This positioning: Keeps luggage centered Reduces rear-end leverage effect Minimizes frame stress Preserves natural riding geometry Maintains cornering confidence Whether you mount a top box, tail bag, or duffel, the load remains stable and predictable. For riders touring across states or carrying daily commuting essentials, balanced placement directly impacts ride comfort and long-distance fatigue. Wide Mounting Platform Compatibility The Haulier design features a wide, flat mounting base suitable for: Aftermarket top boxes Tail bags Duffel systems Soft luggage Touring gear setups The platform allows flexible strap positioning and secure tie-down options. It integrates seamlessly with most standard luggage systems without requiring custom adapters or structural modification. Corrosion Resistance & Long-Term Durability Touring motorcycles face exposure to: Rain Humidity Road debris Dust Heat cycles The matte black powder-coated finish enhances corrosion resistance and protects the metal structure from surface oxidation and wear. This coating also provides scratch resistance under regular luggage movement and strap contact. The result is a rear carrier that maintains both structural integrity and aesthetic consistency over time. Precision Fitment for KTM Adventure 390 The Haulier Rear Carrier is designed exclusively for the KTM Adventure 390 chassis. It aligns with factory mounting points to ensure: Secure attachment Even load distribution No drilling or cutting required Clean, factory-style finish Installation is direct bolt-on. No modification.No welding.No compromise to subframe integrity. Once installed, it integrates naturally into the ADV 390’s rear silhouette without appearing oversized or intrusive. Real-World Touring Advantage Long-distance riding demands practical storage solutions. Carrying weight improperly increases fatigue, instability, and mechanical strain. A properly engineered rear carrier: Improves luggage security Maintains stable handling Reduces subframe stress Increases travel flexibility Whether you are commuting daily, weekend touring, or running extended interstate routes, the Haulier Carrier supports real adventure usage. It converts your KTM Adventure 390 from capable to truly expedition-ready. Key Features Custom-fit design for KTM Adventure 390 Mild steel primary frame with aluminum reinforcement Matte black powder-coated finish for corrosion resistance Wide mounting platform for luggage versatility Close-to-chassis load positioning for balanced handling Direct bolt-on installation, no modification required Construction Overview Material: Mild steel with aluminum reinforcementFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Rear luggage mounting platform Why This Upgrade Matters Adventure riding is about distance and self-sufficiency. A properly engineered rear carrier expands cargo capability while preserving ride dynamics. The LCB Haulier Rear Carrier strengthens the KTM Adventure 390’s touring potential without altering its mechanical balance. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Headlight Protection Grill for KTM Adventure 390 The LCB Obex Headlight Grill for KTM Adventure 390 is engineered for riders who understand that lighting reliability is non-negotiable. Built to shield your headlight assembly from stones, gravel spray, and trail debris, this grill reinforces one of the most exposed and expensive components on your ADV 390. Adventure motorcycles operate in unpredictable environments. The front wheel constantly throws debris upward. At highway speeds, even a small stone can crack a headlight lens. Off-road riding increases the risk significantly. A damaged headlight doesn’t just affect aesthetics, it compromises night visibility, safety, and legal compliance. The Obex Headlight Grill functions as a structural barrier between external impact and the headlight assembly, reducing the risk of lens damage without restricting light performance. Structural Material Engineering The Obex Grill uses a hybrid construction approach for balanced protection: Primary Frame: High-grade mild steel for impact resistance and rigidity Detailing Elements: Aluminum accents for weight efficiency and structural reinforcement Mild steel provides dependable strength under impact load. Aluminum detailing reduces overall weight and supports mounting stability. This material combination ensures durability without creating unnecessary front-end mass that could affect steering feel. Adventure bikes are sensitive to weight distribution. The Obex Grill maintains structural integrity without altering handling characteristics. Impact Protection Without Light Interference A poorly designed headlight grill can distort beam output or reduce visibility. The Obex Grill is precision-cut to preserve headlight projection clarity. Its angular pattern: Deflects stones and debris Maintains unobstructed beam spread Avoids excessive light shadowing Supports optimal nighttime visibility The grill sits at a calculated distance from the lens surface to prevent vibration contact while preserving airflow. This ensures the headlight performs as intended, just protected. Corrosion Resistance & Weather Durability The front fascia of the motorcycle faces direct environmental exposure: Rain Dust Road salt Mud splatter Heat cycles The matte black powder-coated finish enhances corrosion resistance and surface durability. It protects against oxidation and prevents premature wear. The coating also resists minor scratches from debris impact and washing, maintaining a consistent finish over time. Visually, the matte black surface integrates seamlessly with the KTM Adventure 390’s aggressive design language. Design Integration with ADV Styling Protection components should complement, not disrupt. The Obex Headlight Grill is shaped to follow the angular design of the ADV 390 front fascia. Its bold geometry enhances the motorcycle’s adventure-ready presence while preserving OEM proportions. It does not look oversized or improvised. It looks intentional. This balance between function and design makes it suitable for both urban riders and off-road explorers. Precision Fitment & Installation Improperly mounted headlight grills can vibrate, rattle, or stress mounting brackets. The Obex Grill is designed exclusively for KTM Adventure 390 and aligns with factory mounting points. Installation is: Direct bolt-on No drilling required No cutting No permanent modification Once secured, it remains stable under vibration, high-speed riding, and uneven terrain. The structural positioning ensures it does not interfere with headlight alignment or adjustment mechanisms. Real-World Use Advantage Radiator damage can end a ride. So can lighting failure. A cracked headlight lens affects: Night riding safety Visibility in poor weather Road legality compliance Overall structural integrity Preventative protection reduces long-term repair costs and downtime. For riders who frequently tour, commute at night, or explore trails, this upgrade adds mechanical insurance without sacrificing aesthetics. Key Features Designed specifically for KTM Adventure 390 High-grade mild steel with aluminum detailing Protects headlight from stones, gravel, and debris Precision-cut pattern preserves beam clarity Matte black powder-coated finish for corrosion resistance Enhances aggressive front-end styling Direct bolt-on installation with no modification required Construction Overview Material: Mild steel with aluminum detailingFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Headlight protection Why Headlight Protection Matters Adventure motorcycles expose lighting systems to high-impact risk. Preventative protection preserves visibility, reduces repair cost, and strengthens overall riding confidence. The LCB Obex Headlight Grill reinforces the KTM Adventure 390’s defensive architecture without altering beam performance or ride dynamics. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Saddle Stay for KTM Adventure 390, Touring & Pannier Support System The LCB Casus Saddle Stay for KTM Adventure 390 is engineered for riders who load up and go. Built to support saddlebags and panniers across highways, mountain passes, and broken terrain, this stay provides structural stability without compromising the motorcycle’s balance or geometry. Adventure motorcycles are meant to carry gear. But luggage without proper support becomes a liability. Uncontrolled movement can cause instability, stress the subframe, interfere with suspension travel, or make contact with the exhaust. The Casus Saddle Stay eliminates those risks through rigid mounting structure and calculated load placement. When touring long distance, structural support matters more than styling. Structural Engineering & Tubular Strength The Casus Saddle Stay is constructed from premium mild steel tubing selected for load-bearing reliability. Mild steel provides: High tensile strength Resistance to bending under load Durability under repeated vibration Long-term structural integrity Tubular construction increases rigidity while maintaining manageable weight. The frame design is built to resist flex during cornering, braking, and uneven terrain riding. This is especially important for adventure motorcycles, where suspension movement and chassis dynamics are constantly changing. Controlled Luggage Positioning & Clearance One of the primary purposes of a saddle stay is controlled spacing. The Casus Stay is designed to: Keep saddlebags clear of the exhaust Prevent contact with swingarm movement Maintain distance from rear wheel travel Preserve suspension articulation Improper clearance leads to melted bags, uneven wear, and potential safety hazards. This design ensures consistent separation even when carrying heavy loads. Load stability is maintained through evenly distributed mounting points aligned with the KTM Adventure 390’s chassis architecture. Balanced Load Distribution Touring stability depends on symmetrical weight distribution. The Casus Saddle Stay features: Ergonomic geometry aligned with rear subframe Even mounting placement across both sides Reduced leverage effect from overhang weight Stable center of gravity retention When luggage sits too far outward or too high, it alters handling response. This stay keeps the load positioned close to the chassis to maintain predictable ride dynamics. Whether riding two-up or solo, balanced luggage placement reduces fatigue and improves long-distance control. Corrosion Resistance & Durability Adventure motorcycles encounter: Rain exposure Dust-heavy environments Road salt Heat cycles Continuous vibration The matte black powder-coated finish enhances corrosion resistance while protecting the metal surface from oxidation and abrasion. It also resists minor scratches from strap contact and luggage movement. The finish integrates seamlessly with the KTM Adventure 390’s rugged visual identity. Precision Fitment for KTM Adventure 390 This saddle stay is designed exclusively for KTM Adventure 390 and aligns with factory mounting points. Installation is: Direct bolt-on No cutting No drilling No frame modification The mounting structure distributes load properly across the chassis to avoid stress concentration on a single point. Once installed, it sits firmly without vibration-induced rattle or movement. Proper fitment preserves structural integrity and maintains factory aesthetics. Real-World Touring Advantage For riders heading out on extended tours, saddle stays are not optional equipment. They are structural safeguards. Without proper support: Saddlebags sag Luggage shifts Contact with exhaust becomes likely Rear handling becomes unpredictable With proper support: Load remains secure Stability improves Fatigue decreases Touring confidence increases The Casus Saddle Stay allows riders to carry heavier loads without compromising handling characteristics. This is mechanical reinforcement for long-haul reliability. Key Features Designed specifically for KTM Adventure 390 Heavy-duty mild steel tubular construction Corrosion-resistant matte black powder coating Maintains safe clearance from exhaust and swingarm Ergonomic design for even load distribution Reduces vibration and movement under load Direct bolt-on installation with no modifications required Construction Overview Material: Premium mild steel tubingFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Saddlebag and pannier support Why This Upgrade Matters Adventure motorcycles are built for distance and load-bearing. A properly engineered saddle stay protects luggage, preserves handling stability, and prevents mechanical interference. The LCB Casus Saddle Stay strengthens the KTM Adventure 390’s touring capability without altering ride geometry or suspension performance. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Lower Crash Guard for KTM Adventure 390, Engine & Frame Protection The LCB Bellator Lower Crash Guard for KTM Adventure 390 is engineered for riders who understand that impact protection is not optional on an adventure motorcycle. Built to shield the engine casing, lower frame rails, and exhaust routing from fall damage and trail impact, this crash guard reinforces the most vulnerable structural zones of your ADV 390. Adventure motorcycles are tall, torque-heavy machines. A low-speed tip-over on uneven terrain can easily damage engine casings or frame mounts. A rocky descent or pothole impact can expose lower components to direct contact. The Bellator Lower Crash Guard is designed to absorb and redirect that impact energy before it reaches critical mechanical parts. This is structural protection, not decorative tubing. High-Tensile Mild Steel Construction The Bellator Guard is constructed from high-tensile mild steel, selected specifically for impact resistance and structural reliability. Mild steel offers: High impact absorption capacity Controlled deformation under force Strong weld integrity Long-term fatigue resistance Crash guards must handle both static load (bike weight during a fall) and dynamic load (impact during motion). The tubular structure of the Bellator Guard distributes force across multiple mounting points rather than concentrating stress in a single area. This controlled energy dispersion reduces the likelihood of frame stress or localized bending. Engine & Lower Frame Defense The lower section of the KTM Adventure 390 houses some of the most expensive and vulnerable components: Engine casing Exhaust routing Frame rails Mounting brackets In the event of a fall or slide, these areas are often the first contact points. The Bellator Lower Crash Guard is positioned to: Create a protective perimeter around the engine Maintain clearance from exhaust components Prevent direct casing impact Absorb lateral and angled force By creating a buffer zone between ground and engine structure, it reduces mechanical damage risk during tip-overs or uneven terrain incidents. Precision Fitment & Vibration Control Crash protection must remain stable under vibration and dynamic riding conditions. The Bellator Guard is designed exclusively for KTM Adventure 390 and aligns with factory mounting architecture. This ensures: Even load distribution Secure structural anchoring Reduced vibration movement No interference with suspension travel Installation is direct bolt-on. No cutting.No drilling.No frame modification. Proper alignment prevents rattle and ensures the guard remains structurally stable during high-speed riding and rough terrain operation. Corrosion Resistance & Surface Durability Adventure motorcycles face environmental exposure continuously: Rain Dust Mud Heat cycles Road debris The matte black powder-coated finish enhances corrosion resistance while protecting the steel tubing from oxidation and surface degradation. It also integrates seamlessly with the KTM Adventure 390’s aggressive design profile, preserving factory aesthetics while adding structural presence. Modular Compatibility with Raptor Upper Guard The Bellator Lower Crash Guard is compatible with the LCB Raptor Upper Crash Guard, allowing riders to create a full-body crash protection system. When combined: Upper structure protects fuel tank and fairing Lower structure protects engine and frame Integrated setup enhances full-impact defense This modular approach allows riders to expand protection gradually without replacing existing components. Real-World Riding Advantage Adventure motorcycles are designed to explore unpredictable terrain. Even experienced riders face unexpected balance loss, gravel shifts, or surface irregularities. A properly engineered crash guard: Reduces engine damage risk Lowers repair cost exposure Maintains ride continuity after minor falls Preserves structural integrity Confidence increases when mechanical risk decreases. The Bellator Guard is built for riders who use their ADV 390 as intended, not cautiously. Key Features Designed specifically for KTM Adventure 390 High-tensile mild steel construction Protects engine casing, exhaust, and lower frame Matte black powder-coated finish for corrosion resistance Direct bolt-on installation Compatible with LCB Raptor Upper Crash Guard Stable mounting with vibration control Construction Overview Material: High-tensile mild steelFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Engine and lower frame protection Why Lower Crash Protection Matters Lower crash zones are high-impact areas during falls. Reinforcing these zones prevents expensive engine damage and reduces mechanical downtime. The LCB Bellator Lower Crash Guard strengthens the KTM Adventure 390’s structural resilience without compromising handling or aesthetics. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Upper Crash Guard for KTM Adventure 390, Tank & Fairing Protection The LCB Raptor Upper Crash Guard for KTM Adventure 390 is engineered for riders who push beyond paved limits and demand structural protection where it matters most. Designed to shield the fuel tank, fairing panels, and upper radiator zone, this crash guard forms a reinforced perimeter around critical bodywork and mechanical components. Adventure motorcycles are tall and leverage-heavy machines. In a fall, impact rarely stays confined to one point. The upper body panels, tank shrouds, radiator edges, and fairing structures, are highly exposed. A low-speed tip-over can crack plastics. A trail slide can deform mounting brackets. The Raptor Upper Crash Guard is built to absorb and redirect impact energy before it reaches those vulnerable areas. This is not aesthetic tubing. It is structural reinforcement for real-world riding conditions. High-Grade Mild Steel Structural Framework The Raptor Guard is constructed from high-grade mild steel tubing selected for controlled impact absorption and long-term structural integrity. Mild steel offers: High tensile strength Reliable weld bonding Progressive deformation under load Resistance to fatigue from vibration In crash protection, material behavior matters. A guard must not be overly brittle, nor excessively soft. It should absorb energy while maintaining frame alignment. The tubular geometry distributes force across multiple mounting points, preventing concentrated stress at a single bracket. This controlled force dispersion reduces the risk of chassis stress or panel deformation. Upper Body Protection Coverage The Raptor Upper Crash Guard is positioned to protect: Fuel tank shrouds Side fairing panels Radiator upper edges Front structural brackets During a fall, these zones typically contact the ground first at upper height. Without protection, cosmetic damage escalates quickly into structural repair. The Raptor design creates a protective cage that sits offset from the body panels, forming an impact buffer zone. This separation ensures that in most low to moderate falls, the crash guard contacts the ground before the motorcycle body does. Protection is proactive, not reactive. Precision Alignment & Vibration Stability Crash guards must align with the chassis architecture to avoid stress imbalance. The Raptor Upper Guard is engineered exclusively for KTM Adventure 390 and mounts directly to factory load-bearing points. This ensures: Balanced structural anchoring Proper force transfer to frame Reduced vibration under riding conditions No interference with suspension travel Installation is direct bolt-on. No drilling.No cutting.No permanent modification. Once mounted, the guard maintains rigid alignment even under high-speed riding or off-road vibration exposure. A poorly fitted crash guard becomes a liability. Precision mounting prevents that. Corrosion Resistance & Finish Durability Adventure riding exposes upper frame components to: Rain Mud Dust Road debris Heat cycles The matte black powder-coated finish enhances corrosion resistance and protects the steel tubing from oxidation. It also resists minor abrasions from trail contact and cleaning processes. Visually, the matte finish integrates seamlessly with the KTM Adventure 390’s aggressive styling, reinforcing the bike’s adventure-focused character. Modular Compatibility with Bellator Lower Guard The Raptor Upper Crash Guard is fully compatible with the LCB Bellator Lower Crash Guard, allowing riders to create a complete crash protection system. When paired: Upper structure protects tank and fairings Lower structure protects engine and frame Combined system enhances full impact coverage This modular protection architecture allows gradual upgrades without replacing existing components. Real-World Riding Advantage Adventure motorcycles are built to be used, not preserved. Even experienced riders encounter unpredictable surfaces, loose gravel, or uneven terrain. Crash protection reduces the cost and consequence of those moments. A properly engineered upper crash guard: Protects expensive body panels Reduces radiator damage risk Preserves fuel tank integrity Minimizes downtime after minor falls Confidence increases when mechanical vulnerability decreases. The Raptor Upper Crash Guard is designed for riders who treat protection as preparation, not an afterthought. Key Features Designed specifically for KTM Adventure 390 High-grade mild steel tubular construction Shields fuel tank, fairings, and upper radiator zone Matte black powder-coated finish for corrosion resistance Rigid structure for effective crash absorption Direct bolt-on installation with no modification required Compatible with LCB Bellator Lower Crash Guard Construction Overview Material: High-grade mild steel tubingFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Upper body crash protection Why Upper Crash Protection Matters Upper body panels and fuel tanks are high-cost components. Reinforcing these areas reduces repair risk and increases long-term reliability. The LCB Raptor Upper Crash Guard strengthens the KTM Adventure 390’s defensive architecture without compromising ride dynamics or design integrity. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

LCB Stainless Steel Side Stand Base for Royal Enfield Himalayan, Stability Upgrade for Uneven Terrain The LCB Stainless Steel Side Stand Base is a practical reinforcement designed specifically for the Royal Enfield Himalayan. Built to improve parking stability on loose gravel, sand, mud, and uneven terrain, this upgrade increases the contact surface of your side stand, reducing the risk of sinking, tilting, or accidental toppling. Adventure motorcycles are often parked in unpredictable environments. Highway shoulders, campsite soil, mountain trails, and roadside dirt patches rarely offer perfectly compact ground. A narrow stock side stand foot can gradually sink under the bike’s weight, especially when loaded with luggage. Over time, this creates instability that can lead to unnecessary drops. The LCB Side Stand Base addresses this directly by expanding the stand’s footprint and distributing weight more evenly across the ground. Engineered for Load Distribution Constructed from premium-grade stainless steel, this base plate is built to withstand repeated load stress without deforming. Stainless steel provides: High structural rigidity Corrosion resistance in wet or humid conditions Long-term durability under pressure Resistance to oxidation and surface wear The wide-profile design increases ground contact area, reducing pressure per square inch when the motorcycle is parked. This is particularly important when the Himalayan is equipped with touring luggage, top boxes, or auxiliary fuel systems. More surface area equals better stability. Three-Part Reinforced Design The LCB Side Stand Base uses a three-part clamping construction for maximum strength and fit accuracy. This design ensures: Secure grip around the stock side stand foot Even clamping pressure Reduced movement or loosening over time Structural integrity during vibration Adventure bikes vibrate. A single-piece add-on can shift under stress. A reinforced multi-part structure ensures the base remains firmly mounted even after extended use on rough terrain. CNC-machined edges provide precise alignment and clean finishing. There are no uneven edges or sloppy fitment tolerances. Practical Stability for Real Riding Conditions When parking on soft soil or gravel, a narrow stand foot acts like a spike. It sinks gradually, increasing lean angle and risking imbalance. With a wider base: The bike remains upright at a consistent angle The load is distributed across a larger area Risk of sudden tilting is reduced Stability improves during short stops This becomes especially valuable during long tours where terrain changes frequently. It is a small component with a large functional impact. Clean Aesthetic Integration Finished in a sleek stainless silver tone, the base complements the Himalayan’s mechanical, utilitarian styling. It does not appear oversized or flashy. It looks purposeful, an extension of function rather than decoration. Because it mounts directly over the existing stand foot, factory geometry remains unchanged. Direct Bolt-On Installation Installation requires no welding, cutting, or modification. The three-part system clamps securely around the stock side stand foot using supplied hardware. No structural alteration No permanent modification Easy to install Easy to remove if required Fitment is designed exclusively for the Royal Enfield Himalayan platform to ensure alignment accuracy. Key Features Designed specifically for Royal Enfield Himalayan Premium stainless steel construction Three-part reinforced clamping design CNC precision-machined edges Wide footprint prevents sinking on soft terrain Corrosion-resistant silver finish Direct bolt-on installation Construction Overview Material: Stainless SteelDesign: Three-Part Clamp SystemFinish: Silver (Corrosion Resistant)Fitment: Royal Enfield HimalayanInstallation: Direct Bolt-On Why This Upgrade Matters Adventure motorcycles are heavier than standard commuter bikes. When loaded with gear, they demand stable parking support. A reinforced side stand base prevents inconvenient drops, protects body panels, and improves overall usability in real-world riding conditions. It strengthens reliability without altering ride dynamics. Function over flash. Stability over risk. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. Refer to your Warranty Policy for full details.

Read more less

LCB Radiator Grill Black for Royal Enfield Himalayan, Engine Cooling Protection The LCB Radiator Grill in Black is engineered to protect the cooling system of the Royal Enfield Himalayan without compromising airflow efficiency. On an adventure motorcycle, the radiator sits exposed at the front, constantly vulnerable to stones, gravel spray, mud, and debris thrown up by the front wheel or surrounding traffic. A single direct impact can bend cooling fins, restrict airflow, or damage the radiator core. This grill acts as a structural barrier between external hazards and one of the most temperature-sensitive components of your engine. Adventure riding means unpredictable surfaces. Highway touring means sustained engine heat. Cooling reliability is non-negotiable. The LCB Radiator Grill reinforces that reliability. Built for Structural Defense Manufactured from durable mild steel, the grill is designed to absorb and deflect impact energy before it reaches the radiator fins. Mild steel provides: High impact resistance Structural rigidity Long-term durability Consistent performance under vibration The matte black powder-coated finish protects the metal surface from corrosion, oxidation, and environmental exposure. Himalayan riders encounter rain, dust, humidity, and temperature changes regularly. The coating ensures surface integrity remains intact even after extended use in mixed weather conditions. This is functional armor, not decorative trim. Airflow Without Compromise Radiator protection only works if cooling efficiency remains intact. A poorly designed grill restricts airflow, leading to increased operating temperatures. The LCB Radiator Grill is precision-cut to maintain balanced airflow while blocking larger debris. The mesh pattern is engineered to: Allow consistent air passage Prevent large stone intrusion Protect delicate cooling fins Maintain thermal stability during long rides Cooling systems rely on unobstructed airflow. This grill preserves that function. Designed Specifically for Himalayan Geometry This is not a universal plate adapted to fit. The grill is designed specifically around the Royal Enfield Himalayan’s radiator dimensions and mounting architecture. Fitment ensures: Correct alignment with stock mounting points No interference with radiator hoses No obstruction of airflow channels Clean integration with front fascia Installation is direct bolt-on. No drilling. No cutting. No modification. The hardware aligns with factory positions, preserving structural integrity and making removal straightforward if required. The result is a factory-aligned appearance rather than an aftermarket add-on look. Real-World Riding Protection Adventure and touring riders commonly face: Gravel impact from loose roads Mud accumulation during monsoon rides Debris from construction zones Stone spray from off-road trails A damaged radiator can end a ride prematurely. Protecting it reduces risk and extends service life. The LCB Radiator Grill strengthens long-term reliability without altering ride dynamics. Key Features Designed specifically for Royal Enfield Himalayan Heavy-duty mild steel construction Matte black powder-coated corrosion-resistant finish Protects radiator fins from stones and debris Maintains optimal airflow for cooling efficiency Precision-cut mesh for balanced ventilation Direct bolt-on installation with included hardware Construction Overview Material: Mild SteelFinish: Matte Black Powder CoatFitment: Royal Enfield HimalayanPosition: Front Radiator ProtectionInstallation: Direct Bolt-On Why This Upgrade Makes Mechanical Sense Radiators are exposed and vulnerable. Cooling stability directly impacts engine longevity. Preventive protection costs far less than radiator replacement or overheating damage. This grill reinforces your Himalayan’s cooling system resilience while preserving airflow efficiency and factory geometry. It is preventive engineering for riders who value reliability. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. Refer to your Warranty Policy for complete terms.

Read more less

LCB Oculus Headlight Shield for Royal Enfield Himalayan BS6, Clear Lens Protection with Structural Reinforcement The LCB Oculus Headlight Shield is engineered to protect the LED headlamp assembly of the Royal Enfield Himalayan BS6 without compromising beam clarity or airflow. On an adventure platform, the headlight sits prominently exposed, vulnerable to gravel spray, flying stones, mud, and trail debris. Replacing a damaged LED unit is expensive. Preventing damage is far more practical. This shield provides a transparent protective barrier supported by a rigid steel frame, preserving full light output while reinforcing front-end durability. Adventure motorcycles operate in unpredictable environments. Highway debris, broken tarmac, off-road sections, and monsoon riding all increase the risk of lens impact. The Oculus Shield reduces that exposure without altering light dispersion or visibility. Protection here is functional, not cosmetic. Dual-Material Construction for Balanced Protection The shield combines two materials with distinct mechanical roles: Impact-Resistant Polycarbonate PanelPolycarbonate is chosen for its high impact tolerance and optical clarity. It absorbs shock energy from debris strikes while maintaining transparency. Unlike brittle plastics, it resists cracking under sudden impact. Benefits include: High impact absorption Scratch resistance under normal use Optical clarity for unaltered beam projection Lightweight performance Mild Steel Exoskeleton FrameThe outer structural frame is precision-cut from mild steel to provide rigidity and mounting strength. The frame distributes impact force away from the headlight housing and secures the polycarbonate panel firmly in place. The steel frame is finished in a matte black powder coat, offering corrosion resistance against rain, humidity, and dust exposure. Together, the materials create a reinforced protective layer that does not distort light or add excessive front weight. Preserves Beam Performance A poorly designed headlight guard can reduce brightness, create glare, or scatter the beam pattern. The Oculus Shield maintains: Full beam visibility No distortion in light projection No interference with high/low beam alignment Clear optical transmission The transparent panel ensures the LED’s original output characteristics remain intact. Night visibility is preserved exactly as intended by factory engineering. Engineered Specifically for Himalayan BS6 This shield is designed for the Royal Enfield Himalayan BS6 headlight assembly dimensions and mounting architecture. It is not a universal fit. Fitment ensures: Precise alignment with stock headlight housing Correct clearance from lens surface No interference with wiring or brackets Clean integration with the front fascia Installation is direct bolt-on. No drilling. No cutting. No structural modification. Once installed, it appears integrated rather than aftermarket. The design complements the Himalayan’s rugged, utilitarian aesthetic without appearing oversized or intrusive. Real-World Riding Protection Adventure and touring riders commonly encounter: Gravel impact from broken roads Stone spray from off-road riding Mud and debris during monsoon conditions Unexpected trail hazards Even minor lens damage can reduce visibility and require costly replacement. The Oculus Shield acts as a sacrificial protective layer, absorbing impact before it reaches the LED unit. Preventive reinforcement extends component life and reduces long-term maintenance costs. Important Installation Guidance While installing the Oculus Headlight Shield, ensure sufficient gap between the polycarbonate panel and the headlight lens. Proper clearance prevents: Heat buildup from prolonged LED use Pressure stress on the lens surface Potential distortion from improper mounting Correct installation maintains airflow and ensures long-term reliability. Key Features Designed specifically for Royal Enfield Himalayan BS6 Transparent impact-resistant polycarbonate shield Precision-cut mild steel exoskeleton frame Scratch-resistant and impact-absorbing construction Maintains full beam clarity without distortion Matte black corrosion-resistant frame finish Lightweight, structurally reinforced design Direct bolt-on installation with precise fitment Construction Overview Shield Material: Impact-Resistant PolycarbonateFrame Material: Mild SteelFinish: Matte Black Powder CoatFitment: Royal Enfield Himalayan BS6Installation: Direct Bolt-OnApplication: Headlight Protection Why This Upgrade Makes Mechanical Sense LED headlight units are expensive and vulnerable. Adventure motorcycles face terrain conditions that increase impact exposure. Preventive protection reduces replacement risk and preserves night-riding confidence. The Oculus Shield strengthens front-end durability while maintaining full optical clarity and factory beam performance. It is structural protection without compromise. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. Refer to your Warranty Policy for complete terms.

Read more less

LCB MIG Headlight Grill for Royal Enfield Himalayan BS6, Steel Mesh Front-End Protection The LCB MIG Headlight Grill is engineered to reinforce the front-end durability of the Royal Enfield Himalayan BS6 without compromising beam performance. Positioned directly in front of the LED headlamp assembly, this steel mesh protector shields the lens from stones, gravel spray, and debris impact, common hazards during both off-road riding and long-distance touring. Adventure motorcycles operate in environments where the headlight is constantly exposed. Broken roads, loose gravel, trail sections, and highway debris can all cause lens damage. Even minor impact can crack or scratch the headlamp surface, leading to expensive replacement. The MIG Headlight Grill acts as a structural barrier, absorbing and deflecting debris before it reaches the lens. This is preventative reinforcement, built with functional intent. Heavy-Duty Mild Steel Construction The grill is manufactured from high-strength mild steel, selected for its rigidity and impact resistance. Steel provides: Superior structural strength High resistance to bending under impact Long-term durability under vibration Stable mounting under rough terrain conditions Unlike lightweight plastic guards that can flex or crack, the MIG grill maintains structural integrity under repeated stress cycles. The matte black powder-coated finish protects the steel surface from corrosion, oxidation, and weather exposure. Himalayan riders frequently encounter rain, dust, humidity, and temperature fluctuations. The coating ensures long-term durability while maintaining a clean, adventure-ready appearance. Precision-Cut Mesh for Balanced Visibility Protection must not interfere with illumination. A poorly designed grill can reduce brightness or distort beam spread. The MIG grill features a precision-cut mesh pattern engineered to: Allow maximum light transmission Prevent large stone intrusion Maintain high and low beam functionality Avoid glare or distortion The spacing of the mesh is calculated to balance structural strength with optical clarity. Night visibility remains consistent with stock performance characteristics. Light protection does not mean light obstruction. Model-Specific Fitment for Himalayan BS6 This headlight grill is designed specifically for the Royal Enfield Himalayan BS6 headlight dimensions and mounting points. It is not a universal clamp-on accessory. Fitment ensures: Accurate alignment over the headlamp housing Proper clearance from the lens surface No interference with wiring or brackets Secure, vibration-resistant installation Installation is direct bolt-on using supplied mounting hardware. No drilling. No cutting. No structural modification required. The grill integrates cleanly into the bike’s front fascia, preserving factory geometry. Once installed, it appears purposeful rather than aftermarket-added. Built for Real Riding Conditions Himalayan riders frequently face: Gravel impact from broken tarmac Stone spray from trail riding Debris from construction zones Mud splatter during monsoon conditions High-speed highway particles The MIG Headlight Grill reduces the risk of direct lens damage in these conditions. It reinforces front-end protection while maintaining airflow and visibility. For riders who use their Himalayan as intended, on mixed terrain and long routes, front-end durability matters. Structural Stability Under Vibration Adventure motorcycles generate continuous vibration, especially during off-road riding. The MIG grill is engineered to remain stable under those conditions. The steel frame resists flex, and the mounting design minimizes rattling. Long-term reliability is built into the structure, ensuring consistent performance across extended mileage. Key Features Custom-designed for Royal Enfield Himalayan BS6 Heavy-duty mild steel construction Precision-cut mesh for balanced protection and visibility Matte black powder-coated corrosion-resistant finish Shields headlight from stones and debris Maintains full beam clarity without distortion Vibration-resistant mounting structure Direct bolt-on installation with included hardware Construction Overview Material: High-Strength Mild SteelFinish: Matte Black Powder CoatFitment: Royal Enfield Himalayan BS6Position: Front Headlight ProtectionInstallation: Direct Bolt-On Why This Upgrade Makes Mechanical Sense Headlight assemblies are expensive and vulnerable. Adventure motorcycles increase exposure to impact risk. Reinforcing the headlamp reduces replacement cost and preserves nighttime safety. The LCB MIG Headlight Grill strengthens front-end resilience without altering optical performance or structural integrity. It is protection engineered for riders who use their machines beyond smooth pavement. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. Refer to your Warranty Policy for complete terms.

Read more less