KTM Adventure 250 Stage 1 Kit

NGK Iridium IX, centre plug. A fine-wire iridium centre electrode in place of a conventional one, firing a sharper, more focused spark. On a multi-spark head the centre plug does the heavy lifting. Iridium gives easier cold starts, a steadier idle and cleaner combustion, and holds its gap far longer than a nickel plug. Direct fit. Nothing to adjust. Find your bike KTM Duke 250 Duke 390 · 2019 model RC 200 · 2017 model Bajaj Centre plug position Dominar 250 & 400, including BS6 Pulsar 200NS · RS200 · AS200 Hero Takes 1 Karizma XMR 210 · 2023 to current Karizma XMR owners, this is the iridium upgrade for your bike. The XMR leaves the factory with a Bosch VR5NEU (Hero part 31918ACA001S). That is the same plug as the NGK LKAR8A-9, and this LKAR8AI-9 is its iridium version: same 12mm thread, same 26.5mm reach, same heat range, same 0.9mm gap. It threads straight in with nothing to change. Not the older Karizma. The air-cooled 223cc Karizma and Karizma ZMR take the DPR8EIX-9, a completely different plug, also on our site. Doing a Bajaj triple-spark service? You need this centre plug plus two CPR8EAIX-9 side plugs. We sell the Dominar 400 set complete. Riding another KTM? Send us your model and year and we will confirm the right plug before you order. Specifications Part number · LKAR8AI-9 Type · Iridium IX, fine wire Thread · 12mm · Reach 26.5mm Heat range · 8 · Gap 0.9mm, factory pre-set Position · centre plug Cross-reference · Bosch VR5NEU · NGK LKAR8A-9 (stock 4786) · Hero 31918ACA001S Sold as · single plug Fitting Arrives pre-gapped and ready to fit. Thread in by hand first, then torque to your manual's figure. If you check the gap, move the outer electrode only. Unsure which you need? Send us your bike and year and we will confirm before you order.

Read more less

The BMC FM995/04 is a washable, reusable panel filter for the KTM 125 to 390 platform and its Husqvarna siblings. It replaces the paper element inside the stock airbox with no modification. Oiled cotton gauze, full moulded in a single piece with no welded joints, filtering down to 7 microns. This is the road-spec filter, balancing airflow against filtration for street and touring use. The FM995/04RACE is the higher-flow track version. Supplied pre-oiled and ready to fit. Fitment KTM 125 Duke (2017 to 2023) 200 Duke (2017 to 2024) 250 Duke (2017 to 2023) 390 Duke (2017 to 2023) 125 RC (2022 to 2024) 200 RC (2022 to 2024) 390 RC (2022 to 2024) 250 Adventure (2021 to 2024) 390 Adventure (2020 to 2024) Husqvarna Svartpilen 200 (2020 to 2023) Vitpilen 401 and 401 Aero (2018 to 2023) Husqvarna 125 and 250, India market The Svartpilen 125, Svartpilen 250 and Vitpilen 250 are built on the same KTM 125 and 250 Duke platform listed above and share its airbox, so this filter is the correct part for them. BMC lists the KTM source model rather than these India-market Husqvarnas, so treat it as fitment guidance. Send us your registration number and we will confirm. Specification Type: flat panel, direct replacement for the OEM element Dimensions: 128mm x 149mm Media: oiled cotton gauze with epoxy-coated alloy mesh Filtration: down to 7 microns Service: washable and re-oilable, supplied pre-oiled Warranty: 2 years limited

Read more less

NGage VH8RTII-9 Double Iridium Spark Plug for KTM, Bajaj (Center Plug), Triumph & Hero Motorcycles The NGage VH8RTII-9 Double Iridium Spark Plug is a motorcycle ignition component developed for a defined group of modern, fuel-injected motorcycles across KTM, Bajaj, Triumph, and Hero platforms. This listing focuses on its primary applications across KTM Duke, RC, and Adventure models, while also covering its specified use as the center spark plug for Bajaj Pulsar NS200 and RS200 Triple Spark engines. Manufactured in Japan, the VH8RTII-9 is part of NGage’s Double Iridium spark plug series and is specified for use in both BS4 and BS6 compliant motorcycles, as stated by the manufacturer. This spark plug is intended as a direct replacement for motorcycles listed in the compatibility section below and is engineered to match the ignition system requirements of these models as defined by NGage’s official part-number application chart. Double Iridium Construction NGage classifies the VH8RTII-9 as a Double Iridium spark plug, meaning iridium material is used on both the center electrode and the ground electrode. Iridium is used in modern spark plug construction due to its high melting point and resistance to electrode erosion under repeated ignition cycles. This construction approach is commonly applied in motorcycles with high-energy ignition systems and tightly controlled combustion environments. The double-iridium configuration is intended to maintain consistent electrode geometry over extended operating periods under normal riding conditions. NGage does not publish electrode dimensions, spark gap values, heat-range explanations, or service-interval figures for this model. KTM Motorcycle Applications NGage lists the VH8RTII-9 spark plug for the following KTM motorcycles: KTM Duke 200 KTM Duke 390 KTM RC 200 KTM RC 390 KTM Adventure 250 KTM Adventure 390 These motorcycles span KTM’s liquid-cooled single-cylinder platforms that share common ignition system requirements. For these models, the VH8RTII-9 is intended as a direct replacement spark plug without modification. Bajaj Pulsar NS200 / RS200, Center Plug Application NGage also specifies the VH8RTII-9 for use in Bajaj Pulsar NS200 and RS200 Triple Spark engines. These engines use a three-spark-plug configuration, consisting of: One center spark plug Two side spark plugs For these motorcycles: The VH8RTII-9 is specified for the center spark plug position only. It is not specified for the two side spark plug positions. This listing covers one (1) spark plug, intended to replace the center plug in the Triple Spark configuration. Owners of Bajaj Pulsar NS200 and RS200 must ensure they are purchasing the correct spark plug for the correct position. The VH8RTII-9 should be installed only in the center plug location as per NGage’s compatibility chart. Additional Manufacturer-Listed Applications NGage also lists the VH8RTII-9 for the following motorcycles: Triumph Speed 400 Scrambler 400X New Speed T4 Hero Xpulse 210 4V These models are included here for completeness of the manufacturer’s published compatibility. BS4 and BS6 Compatibility NGage specifies that the VH8RTII-9 spark plug is compatible with both BS4 and BS6 vehicles. This allows its use across production years that fall before and after the BS6 emission-standard transition, provided the motorcycle is included in the compatibility list. No emission-reduction, tuning, or fuel-efficiency claims are made for this product. Manufacturing Origin The VH8RTII-9 spark plug is manufactured in Japan, as stated by NGage. No additional manufacturing process details or certification claims are published for this model. Intended Use The NGage VH8RTII-9 is intended for routine replacement during scheduled maintenance or spark-plug service intervals recommended by the motorcycle manufacturer. It is suitable for standard road use on the motorcycles listed below. This spark plug is not positioned by NGage as a racing, track-only, or tuning component. Compatibility As per NGage official compatibility chart for part number VH8RTII-9: KTM Motorcycles KTM Duke 200 KTM Duke 390 KTM RC 200 KTM RC 390 KTM Adventure 250 KTM Adventure 390 Bajaj Motorcycles (Triple Spark, Center Plug Only) Bajaj Pulsar NS200, Center plug only Bajaj Pulsar RS200, Center plug only Triumph Motorcycles Triumph Speed 400 Triumph Scrambler 400X Triumph New Speed T4 Hero Motorcycles Hero Xpulse 210 4V Variant Explanation This listing is for NGage VH8RTII-9 Double Iridium Spark Plug only. “Double Iridium” refers to iridium usage on both the center and ground electrodes. This part number represents a single manufacturer-defined specification. For Bajaj Triple Spark engines, this spark plug is intended for the center position only. No alternate heat ranges or material variants are included in this listing. Specifications Brand: NGage Part Number: VH8RTII-9 Spark Plug Type: Double Iridium Vehicle Compatibility: BS4 & BS6 Country of Manufacture: Japan Application: Motorcycle spark plug Installation / Usage Notes Install only on motorcycles listed in the compatibility section. For Bajaj NS200 and RS200, install in the center spark plug position only. Follow the motorcycle manufacturer’s service manual torque specifications. Install on a cold engine. NGage does not publish spark-plug gap or torque values for this model. Terminal Type This plug is supplied with a bare threaded terminal stud. That is how it leaves the factory, and no terminal nut is fitted. A plug cap that screws onto the thread fits as supplied. If your cap seats on a terminal nut instead, a standard screw-on spark plug terminal nut can be fitted to the stud.

Read more less

N-Gage Hyper Flow Performance Air Filter for KTM 200 / 250 / 390 (BS4 & BS6) The N-Gage Hyper Flow Performance Air Filter for KTM 200, 250 & 390 (BS4 & BS6) is a high-performance replacement designed specifically for KTM motorcycles. It ensures consistent airflow while providing effective filtration and long-lasting durability. This KTM air filter fits a wide range of KTM platforms including Duke, RC, and Adventure models. It is perfect for riders who want to improve intake efficiency without compromising reliable engine protection during daily rides. Air filters are crucial for engine performance by controlling both the volume and cleanliness of air entering the combustion chamber. On high-revving KTM engines, any airflow restriction or uneven filtration can negatively impact throttle response, combustion stability, and overall ride smoothness. The N-Gage Hyper Flow KTM air filter addresses these concerns by offering increased airflow compared to traditional stock paper filters, while still maintaining excellent particulate filtration. KTM Air Filter High-Flow Cotton Gauze Filtration Design The N-Gage Hyper Flow Air Filter is crafted using premium organic cotton gauze. This material is layered to provide the right balance between airflow and filtration efficiency. Unlike disposable paper filters that restrict airflow as they accumulate dust, cotton gauze filters maintain more consistent airflow when properly cleaned and maintained. Additionally, the filter comes factory pre-oiled, enabling it to trap fine dust particles effectively without hindering airflow. According to manufacturer specifications, this KTM air filter allows up to 30% more airflow than stock filters. It filters particles as small as 5 microns, supporting better engine breathing across various riding conditions. Designed for KTM Performance Engines This KTM air filter is made for motorcycles equipped with 200cc, 250cc, and 390cc engines, compatible with both BS4 and BS6 platforms. It fits using stock airbox dimensions common to KTM Duke, RC, and Adventure models. Riders can install it as a direct replacement without needing modifications. Fitting directly into the factory airbox means it preserves the original intake design, sealing surfaces, and water protection. No cutting, drilling, or alterations are necessary during installation. Throttle Response and Engine Behaviour with KTM Air Filter The improved airflow provided by this filter can lead to sharper throttle response and smoother engine behaviour throughout the rev range. By reducing intake restriction compared to the stock paper filters, the N-Gage Hyper Flow Air Filter ensures consistent air delivery during acceleration and sustained riding sessions. This KTM air filter has been dyno-tested as stated by the manufacturer. However, actual riding results may vary based on riding style, fuel quality, maintenance, and engine condition. It is designed to function with stock ECU settings and does not require additional tuning after installation. Reusable and Long-Term Ownership Advantage Unlike conventional disposable air filters, the N-Gage Hyper Flow KTM air filter is washable and reusable. With routine cleaning and re-oiling using appropriate maintenance products, it can be reused multiple times throughout its lifespan. This makes it an ideal choice for riders who log high mileage, ride in dusty conditions, or prefer a long-term, cost-efficient solution. Proper maintenance is critical to maintain filtration efficiency and protect the engine over time. Tested for Mixed Riding Conditions KTM motorcycles are frequently used across diverse environments such as city riding, highway touring, track use, and off-road terrains. The N-Gage Hyper Flow Air Filter is engineered to ensure reliable airflow and filtration performance across these varied conditions. To maintain optimal performance, inspection and cleaning intervals should be adjusted, especially in dusty or wet riding environments. Compatibility Overview This air filter is compatible with these KTM models: BS4 KTM Duke 200 / 250 / 390 BS6 KTM Duke 200 / 250 / 390 BS6 KTM RC 200 / 390 BS6 KTM Adventure 250 / 390 Fitment is based on the stock intake configuration of these models. Installation and Maintenance Installing the N-Gage Hyper Flow Air Filter follows the same process as replacing the original stock air filter. It does not require specialized tools. Riders must ensure the filter is properly seated and sealed within the airbox to prevent any leaks or contamination. For best results, clean and re-oil the filter at recommended intervals using specialized air filter cleaning products. Avoid over-oiling as it can reduce filtration efficiency. What’s Included The package includes one N-Gage Hyper Flow Performance Air Filter, factory pre-oiled and ready for installation.

Read more less

PowerTRONIC V4 Piggyback ECU for KTM, Plug & Play Performance Upgrade The PowerTRONIC V4 is a piggyback performance ECU designed to enhance how your KTM delivers power, without replacing the stock ECU and without cutting a single wire. It connects directly to the factory wiring harness, making it a plug-and-play upgrade for riders who want sharper throttle response, stronger acceleration, and improved ride feel across the rev range. This is not a cosmetic modification. It changes how the engine behaves. What the PowerTRONIC V4 Actually Does Modern KTM engines are tuned from the factory to meet emission norms and broad usability targets. That often means conservative fuelling and ignition settings. The PowerTRONIC V4 works alongside the stock ECU and optimizes those parameters for improved performance. By adjusting fuelling and ignition timing, the V4 helps: Improve throttle response Deliver stronger mid-range pull Smooth out flat spots in acceleration Enhance ride consistency across gears The result is a motorcycle that feels more responsive, more alive, and more connected to your throttle input. Plug & Play Installation The PowerTRONIC V4 connects directly to your motorcycle’s stock wiring harness. No cutting. No splicing. No permanent modifications. This means: Installation is reversible The stock ECU remains intact The system integrates cleanly with factory electronics For riders who want performance without compromising reliability, this matters. Professional installation is recommended to ensure correct routing and secure mounting. Dual Maps & On-The-Fly Switching The V4 comes with dual pre-loaded maps. These maps are designed to suit different riding conditions or configurations. Riders can switch between maps depending on their setup or preference. If you run an aftermarket exhaust or intake, the ECU can adapt more effectively than stock mapping alone. If you ride both city traffic and open highways, map switching offers flexibility. For advanced users, software access allows deeper tuning adjustments where applicable. Real-World Riding Benefits Performance upgrades are not only about peak horsepower numbers. They’re about how the motorcycle feels when you ride it. With optimized fuelling and ignition control, riders may experience: Cleaner throttle transitions More predictable power delivery Stronger mid-range acceleration Improved response during overtakes The motorcycle feels less restricted and more willing. Actual performance results can vary depending on engine condition, modifications, fuel quality, and riding style. Built for Indian Riding Conditions The PowerTRONIC V4 unit is built using automotive-grade components. It is designed to handle heat, vibration, and weather exposure commonly experienced in Indian riding environments. Whether you ride in: Daily city traffic Highway touring conditions Weekend spirited rides Performance-focused setups The unit is engineered to remain stable and durable. Proper mounting and wiring management are important for long-term reliability. Works With Modified Setups If your KTM is equipped with aftermarket exhaust systems or intake upgrades, stock mapping may not always deliver optimal fuel-air balance. A piggyback ECU allows the engine to respond more accurately to these changes. The PowerTRONIC V4 is positioned as a tuning solution for riders who want to maximize the benefit of their hardware upgrades without replacing the entire factory ECU. It enhances, not replaces. Who This Is For The PowerTRONIC V4 is suitable for riders who: Want sharper throttle response Seek stronger mid-range performance Have installed performance exhaust systems Prefer plug-and-play solutions Want tunability without permanent modifications It is not marketed as a replacement for full standalone racing ECUs. It is a performance enhancer built for real-world riders. Installation & Tuning Notes Plug-and-play harness integration No cutting or permanent modification required Dual map capability Software access available for advanced users Tuning adjustments should be carried out carefully and responsibly. Improper tuning may affect engine behaviour. What’s Included PowerTRONIC V4 ECU Module Plug-and-play wiring harness (model specific) Manufacturer-supplied components as per packaging Exact contents depend on the specific KTM model variant selected. Important Considerations Compatibility varies by KTM model Model selection must be confirmed before purchase Designed to work alongside stock ECU Performance gains vary by motorcycle condition and setup

Read more less

Precision Ignition Upgrade for the KTM 390 Platform The NGage High Performance Spark Plug Kit is engineered to improve ignition efficiency across KTM Duke, RC and Adventure 250-390 models and the Bajaj NS400. This is not just a plug replacement, it is a complete ignition upgrade designed for smoother, cleaner and more responsive performance. Improved Combustion Efficiency Combining an NGage Double Iridium spark plug with an ultra low-resistance racing cable, a resistor spark cap and a brass splicer connector, the kit delivers: Better spark consistency Cleaner, more complete combustion Reduced misfires Smoother, More Responsive Engine Improved throttle response Better acceleration feel More stable idle Reliable in All Conditions Easier cold starts Reliable ignition in wet weather Consistent performance from city riding to track use Built for Street & Performance Use Compatible with stock and modified setups Suitable for both BS4 and BS6 motorcycles Limited warranty, designed for a service life up to 1,00,000 km Fitment This kit is designed for the following KTM Gen2 / Gen3 and Bajaj models: KTM Duke 250 (2017-2023) KTM RC 390 (2015-2025) KTM Duke 390 / 390 R KTM Adventure 250 (2020-2022) KTM Adventure 390 / R / S / X KTM Enduro 390 R KTM Svartpilen 250 KTM Vitpilen 250 Bajaj NS400 (2024-2026) WHAT'S INCLUDED NGage Double Iridium Spark Plug (VH8RTII-9, made in Japan): 1 No NGage Resistor Spark Cap (LD05F-B, 5kΩ): 1 No NGage Racing Spark Plug Cable, ultra low resistance: 1 No NGage Brass Splicer Connector: 1 No

Read more less

NGage Hyper Flow Air Filter (NGAGE-020KTMG3) for BS6 KTM Gen 3 Models, Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-020KTMG3) is a reusable, washable cotton-gauze air filter developed specifically for BS6 KTM motorcycles built on the Gen 3 platform. This air filter is designed as a direct replacement for the stock paper air filter used in KTM’s third-generation intake system. As stated on the official NGage product artwork, this air filter is compatible with “BS6 KTM all Gen 3 models.” NGage does not publish a model-wise compatibility breakdown (such as Duke, RC, or Adventure) for this part number. This listing therefore covers KTM motorcycles that fall under the BS6 Gen 3 platform, exactly as specified by the manufacturer. Designed for KTM BS6 Gen 3 Platform NGage specifies this Hyper Flow Air Filter for KTM motorcycles built on the Gen 3 platform. From the NGage product artwork: Fits: BS6 KTM all Gen 3 models No further segmentation by displacement or model family is provided by NGage for this part number. The filter is engineered to fit directly into the factory airbox of compatible KTM Gen 3 motorcycles without requiring cutting, trimming, or airbox modification. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-020KTMG3 as a Hyper Flow Air Filter that uses a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and published product material, the NGage Hyper Flow Air Filter NGAGE-020KTMG3 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 1.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval. Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the product artwork: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-020KTMG3: BS6 KTM motorcycles built on the Gen 3 platform (Artwork states: “Fits: BS6 KTM all Gen 3 models.”) NGage does not publish a model-wise compatibility breakdown (such as Duke, RC, or Adventure) for this part number. Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-020KTMG3 No alternate sizes, shapes, or Gen-specific variants are shown or specified on the NGage product artwork. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-020KTMG3 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: BS6 KTM Gen 3 models Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 1.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on KTM motorcycles built on the BS6 Gen 3 platform. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

The Red Rooster Galactic Exhaust for KTM Adventure 250 (BS6) is engineered to unlock sharper throttle response, stronger mid-range torque, and a deeper, more authoritative exhaust tone without compromising reliability or daily usability. Designed specifically around the KTM Adventure 250 BS6 platform, this system improves exhaust flow efficiency while preserving the motorcycle’s balanced power delivery and adventure-ready character. Built using Grade 304 stainless steel, the Galactic Exhaust is constructed to withstand continuous heat cycles, harsh weather exposure, vibration, and long-distance touring stress. Grade 304 is known for its corrosion resistance and structural durability, making it ideal for Indian riding conditions where temperature variation, moisture, dust, and road debris are constant variables. This ensures long-term durability without premature fatigue or surface degradation. Internally, the system uses advanced ceramic wool insulation to manage sound resonance and maintain thermal stability. Ceramic wool helps retain consistent acoustic performance even under sustained high-temperature operation. More importantly, it stabilizes back pressure levels, allowing optimized exhaust scavenging. When exhaust gases exit more efficiently, the engine breathes cleaner, resulting in improved throttle clarity and smoother power delivery across the rev range. On real roads, the difference is progressive rather than abrupt. Throttle inputs feel more immediate. Acceleration through the mid-range becomes cleaner and more responsive, especially during highway overtakes, incline climbs, and rolling acceleration between 4,000-7,000 RPM. The Galactic Exhaust does not distort the Adventure 250’s torque curve; it enhances it in a usable, predictable way. Sound tuning has been deliberately engineered to maintain refinement. The exhaust produces a deep, controlled tone with strong bass presence under load, yet it avoids sharp metallic harshness at higher RPM. During cruising speeds, the sound settles into a composed note that does not create fatigue over long distances. This makes it suitable for touring riders who cover extended highway stretches, as well as adventure riders navigating off-road terrain. Weight reduction compared to the stock exhaust system contributes to improved handling dynamics. Lower mass at the rear of the motorcycle assists with quicker directional changes and improved maneuverability. This is particularly noticeable on broken tarmac, gravel sections, and uneven terrain where balance and chassis responsiveness matter. The Galactic Exhaust is built as a direct bolt-on unit for the KTM Adventure 250 (BS6). Installation requires no cutting, welding, or ECU remapping. It integrates with factory mounting points and maintains correct alignment with the stock routing layout. This ensures mechanical stability and simplifies installation for workshops or experienced riders. Thermal management is another key strength. The stainless steel body combined with ceramic insulation allows consistent heat control, preventing premature discoloration and preserving internal packing longevity. This ensures the exhaust maintains both performance and acoustic integrity over time. From an aesthetic perspective, the Galactic Exhaust complements the KTM Adventure 250’s aggressive design language. The stainless construction offers a clean, mechanical finish that aligns with the motorcycle’s purposeful stance. It looks functional rather than ornamental, engineered rather than decorative. The Red Rooster Galactic Exhaust is developed for riders who want measurable improvement in ride feel without sacrificing reliability. It enhances breathing efficiency, refines throttle response, reduces unnecessary weight, and delivers a controlled, adventure-appropriate exhaust character. This is not an excessively loud system designed for spectacle. It is a performance-focused upgrade built for riders who value mechanical precision, durability, and usable gains in real-world conditions. Key Features Designed specifically for KTM Adventure 250 (BS6) Grade 304 stainless steel construction Advanced ceramic wool internal insulation Optimized exhaust flow for cleaner throttle response Improved mid-range torque delivery Deep, controlled exhaust tone Lightweight construction for improved maneuverability Heat-resistant and corrosion-resistant build Direct bolt-on installation No cutting, welding, or ECU remap required Specifications Material: Grade 304 Stainless SteelInternal Insulation: Ceramic WoolFitment: KTM Adventure 250 (BS6)Installation: Direct Bolt-OnPerformance Focus: Improved throttle clarity and mid-range efficiencySound Profile: Deep, refined, controlled What’s in the Box Red Rooster Galactic Exhaust Mounting hardware Installation components as supplied by manufacturer

Read more less