Performance Parts

Both Plugs. One Order. Every Royal Enfield 650 is a parallel twin, which means it runs two spark plugs, and they should always be replaced as a pair. Fitting one new plug alongside one worn plug leaves the two cylinders firing on different ignition characteristics, which is exactly what you are trying to fix. This pack contains two NGage B8RII-8 double iridium spark plugs, so a full plug change is a single purchase rather than a guessing game at checkout. Fitment NGage part number B8RII-8. Listed by NGage for the following twin-cylinder Royal Enfield models: Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 Royal Enfield Bear 650 Royal Enfield Super Meteor 650 Royal Enfield Shotgun 650 Royal Enfield Classic 650 Compatible with both BS4 and BS6 vehicles. If you ride a single-cylinder machine such as the Himalayan 411 or 440, you need one plug, not two, so order the single instead. The Himalayan 450 and Guerrilla 450 are not compatible with this plug at all, as they use a different engine architecture and ignition specification. If you are unsure which applies to your bike, message us and we will help you check. Double Iridium Construction NGage specifies the B8RII-8 as a double iridium spark plug, meaning iridium is used on both the centre electrode and the ground electrode. Iridium is chosen for its ability to withstand high combustion temperatures while holding electrode shape over time, which is why it is common in modern motorcycles running tighter emission and combustion control. Manufactured in Japan, as stated on the packaging. Installation Notes Do not re-gap these plugs. Iridium plugs are pre-set at the factory and the fine centre electrode can be damaged by a feeler gauge or gapping tool. Many older spark plug tutorials show gapping, because they were filmed with copper plugs. Skip that step. Work on a cold engine only. Clean around each plug before removing it, so no grit falls into the cylinder. Thread each plug in by hand first. If it does not turn smoothly, back it out and start again rather than forcing it into the aluminium head. Tighten to the torque figure in your Royal Enfield service manual. NGage does not publish its own gap or torque values for this part. Change both plugs together. What Is In The Box 2 x NGage B8RII-8 double iridium spark plugs Looking for the full ignition upgrade with racing cables and resistor caps? See the NGage High Performance Spark Plug Kit for Royal Enfield 650 Twins.

Read more less

The Rogue V1 Slip-On Muffler (Universal Fitment) is the original Rogue canister, a compact slip-on that lifts the note without shouting over the engine.Read this before ordering. This is the muffler body on its own. It is not a bike-specific kit. Fitment depends entirely on the link pipe you pair it with, and the correct link pipe varies by model and model year. Message us with your bike and year before you order and we will tell you what else you need.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Silicone damping belt to cut vibration at the mount Covered by Barrel's warranty Fitment guidanceUniversal muffler body. Tell us your motorcycle and year and we will confirm which link pipe suits it before you buy.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for Triumph Tiger 900 GT (2025) is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Triumph Tiger 900 GT (2025).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Tiger 900 GT (2025). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Triumph Street Triple 765 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple 765.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Fitment guidanceListed by Barrel for the Triumph Street Triple 765. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Triumph Trident 660, Tiger Sport 660 and Daytona 660 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Trident 660, Tiger Sport 660 and Daytona 660.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Trident 660, Tiger Sport 660 and Daytona 660. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for Triumph Tiger 850 Sport is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Triumph Tiger 850 Sport.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Tiger 850 Sport. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Exhaust for Triumph Street Triple 765 (2014-2022) with Link Pipe is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple 765 (2014-2022).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Street Triple 765 (2014-2022). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Slip-On Muffler for Inline-3 and Inline-4 Motorcycles is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines.Read this before ordering. This is the muffler body on its own. It is not a bike-specific kit. Fitment depends entirely on the link pipe you pair it with, and the correct link pipe varies by model and model year. Message us with your bike and year before you order and we will tell you what else you need.BuildHigh-temperature ceramic insulation to keep surface heat downFitment guidanceUniversal muffler body. Tell us your motorcycle and year and we will confirm which link pipe suits it before you buy.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Rogue 2.0 Slip-On Muffler (Universal Fitment) is the revised Rogue, a reworked baffle stack and added heat shielding over the first-generation canister.Read this before ordering. This is the muffler body on its own. It is not a bike-specific kit. Fitment depends entirely on the link pipe you pair it with, and the correct link pipe varies by model and model year. Message us with your bike and year before you order and we will tell you what else you need.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Fitment guidanceUniversal muffler body. Tell us your motorcycle and year and we will confirm which link pipe suits it before you buy.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The B Twinn Exhaust for Triumph Street Twin 900 is Barrel's twin-outlet line, built for modern classics where the exhaust is part of the silhouette. This version is made for the Triumph Street Twin 900.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Fitment guidanceListed by Barrel for the Triumph Street Twin 900. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Exhaust for Triumph Street Triple and Daytona 675 (2014-2017) is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple and Daytona 675 (2014-2017).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Fitment guidanceListed by Barrel for the Triumph Street Triple and Daytona 675 (2014-2017). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Decat Pipe for Triumph Street Triple and Daytona 675 is a plumbing part, not a muffler. It replaces the restrictive catalytic section ahead of your silencer. On the Triumph Street Triple and Daytona 675 it is the piece that decides how freely everything downstream can flow.Fitted on its own it opens up the midrange and sharpens throttle response. Paired with a Barrel canister it is what lets that canister actually do its job, rather than being choked by a restriction further up the system.Build Stainless steel 304 throughout, so it will not rust through a monsoon Supplied with mounting clamps Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Street Triple and Daytona 675. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for Suzuki V-Strom 650 with Mid Pipe is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Suzuki V-Strom 650.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Suzuki V-Strom 650. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for Suzuki V-Strom 800DE is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Suzuki V-Strom 800DE.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Suzuki V-Strom 800DE. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw Exhaust for Suzuki GSX-S750 with Link Pipe is Barrel's large-bore line, a wide chamber built for multi-cylinder engines that need volume to breathe. This version is made for the Suzuki GSX-S750.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.BuildCovered by Barrel's warrantyFitment guidanceListed by Barrel for the Suzuki GSX-S750. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Rogue 2.0 Full System Exhaust for Kawasaki Versys 650 is the revised Rogue, a reworked baffle stack and added heat shielding over the first-generation canister. This version is made for the Kawasaki Versys 650.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Kawasaki Versys 650. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw V2 Exhaust for Kawasaki Z900 with Link Pipe is the second-generation Outlaw, a wide-chamber canister for multi-cylinder machines. This version is made for the Kawasaki Z900.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Fitment guidanceListed by Barrel for the Kawasaki Z900. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Exhaust for Suzuki Hayabusa (Gen 3) with Link Pipe is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Suzuki Hayabusa (Gen 3).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Fitment guidanceListed by Barrel for the Suzuki Hayabusa (Gen 3). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Rogue 2.0 Full System Exhaust for Kawasaki ER-6n is the revised Rogue, a reworked baffle stack and added heat shielding over the first-generation canister. This version is made for the Kawasaki ER-6n.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Kawasaki ER-6n. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Rogue 2.0 Exhaust for Moto Morini Seiemmezzo 650 is the revised Rogue, a reworked baffle stack and added heat shielding over the first-generation canister. This version is made for the Moto Morini Seiemmezzo 650.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Moto Morini Seiemmezzo 650. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Rogue 2.0 Exhaust for Kawasaki Z650 is the revised Rogue, a reworked baffle stack and added heat shielding over the first-generation canister. This version is made for the Kawasaki Z650.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Kawasaki Z650. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Kawasaki Z900 (2025) is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Kawasaki Z900 (2025).Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Fitment guidanceListed by Barrel for the Kawasaki Z900 (2025). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw V2 Exhaust for Kawasaki Ninja 1100SX with Link Pipe is the second-generation Outlaw, a wide-chamber canister for multi-cylinder machines. This version is made for the Kawasaki Ninja 1100SX.As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon High-temperature ceramic insulation to keep surface heat down Removable DB killer, so you choose the volume Supplied with mounting clamps Fitment guidanceListed by Barrel for the Kawasaki Ninja 1100SX. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Kawasaki Z900 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Kawasaki Z900.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.BuildStainless steel 304 throughout, so it will not rust through a monsoonFitment guidanceListed by Barrel for the Kawasaki Z900. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less