Motorcycle | Rawtorque

FuelX Lite – Plug & Play Autotune Module for Hero Motorcycles | Smoother Throttle | Cooler Engine | Auto Adapt Technology FuelX Lite is your plug-and-play upgrade for a smoother, more efficient riding experience on Hero motorcycles. Designed for riders who want better throttle feel, cooler engine operation, and reduced jerks—without any complex tuning—FuelX Lite offers an intelligent balance between performance and ride comfort. This single-map autotune system automatically adjusts fuel delivery based on riding conditions, weather, and altitude—making it ideal for daily commutes, weekend trails, and long tours alike. ⚙️ Key Features Plug & Play InstallationQuick setup in under 15 minutes with no specialized tools required—simply connect and ride. Cooler Engine OperationReduces engine and exhaust temperature by up to 10%, enhancing durability and comfort during long rides. Auto Adapt TechnologyContinuously fine-tunes fueling based on riding conditions and air-fuel ratio, improving throttle response and smoothness. Automotive-Grade BuildBuilt with high-quality components and sealed connectors that meet OEM-grade reliability and vibration resistance. Weather & Heat ResistantFully protected against water, dust, and extreme temperature conditions—ready for any terrain or season. Enhanced RideabilityEliminates jerks, improves gear shifts, and delivers a more predictable throttle feel across RPM ranges. 🧾 Warranty & Authenticity This product is covered by the official FuelX manufacturer warranty under their terms and conditions.RawTorque supplies only 100% genuine FuelX products, sourced from authorized distributors. (Note: RawTorque does not provide independent warranty coverage. For complete details, please refer to our Warranty Policy.)

Read more less

FuelX Pro+ for Hero Motorcycles – Advanced Smart Autotune Module FuelX Pro+ is the most advanced plug-and-play fuel optimization module developed for modern Hero fuel-injected motorcycles. Designed for riders who want sharper throttle response, improved torque delivery, and refined ride quality, the Pro+ version goes beyond basic correction — it gives you adaptive control with real-time map switching and deeper fueling intelligence. Modern engines are tuned lean from the factory to meet emission standards. While this ensures compliance, it often results in low-speed jerks, abrupt throttle transitions, and flat mid-range performance. FuelX Pro+ recalibrates that balance — intelligently, safely, and without replacing your stock ECU. This is a piggyback autotune module.It works alongside your factory ECU.It does not permanently alter stock programming. The result is smoother power flow, stronger mid-range, and a more controlled riding experience across RPM ranges. Intelligent Performance with 10 Autotune Maps FuelX Pro+ comes preloaded with 10 selectable performance maps. Each map slightly adjusts the target air-fuel ratio to suit different riding styles and conditions. You can choose between maps depending on: City commuting Highway cruising Touring with luggage Off-road riding Fuel quality variations Rider preference for sharper or smoother response Unlike fixed tuning devices, Pro+ allows you to switch maps instantly using the included handlebar map selector. There’s no laptop required during riding and no need to stop for adjustments. This gives you adaptive control without complexity. Noticeable Throttle Refinement & Torque Improvement One of the biggest improvements riders experience with FuelX Pro+ is throttle linearity. Low-speed jerkiness reduces significantly, and partial throttle transitions become more predictable. Benefits include: Up to 25% improvement in throttle precision (real-world feel) Stronger mid-range torque delivery Cleaner acceleration during roll-ons Smoother gear transitions Improved slow-speed control in traffic or trails On motorcycles like the Xpulse 200, Xpulse 210, or Xtreme series, this translates into better crawl control off-road and improved overtaking confidence on highways. Auto Adapt Technology FuelX Pro+ constantly reads engine data and adjusts fueling dynamically based on: Altitude changes Ambient temperature Engine load Throttle input Air density Exhaust or intake upgrades This means the system compensates automatically when you ride in different climates or terrains. Whether climbing hills or riding in humid coastal regions, fueling remains optimized. There is no manual remapping required. Cooler & More Efficient Engine Operation Lean fueling increases combustion temperature. By correcting the air-fuel mixture within safe performance parameters, FuelX Pro+ helps reduce excessive engine heat. Benefits of improved thermal balance include: Reduced engine stress Improved riding comfort in traffic More consistent performance during long rides Better mechanical longevity This becomes particularly important in Indian riding conditions where stop-and-go traffic and high ambient temperatures are common. Plug & Play Installation FuelX Pro+ is designed for clean installation with no wire cutting, splicing, or ECU flashing. Installation typically takes under 20 minutes: Connect the harness to factory oxygen sensor socket Mount the module securely Attach the handlebar map switch Start the motorcycle The entire system is reversible and does not permanently alter factory wiring. Built for Real-World Conditions The module and harness are constructed using automotive-grade components with sealed connectors. It is: Water resistant Heat resistant Vibration resistant Dust protected This ensures long-term durability whether used for daily commuting, touring, or off-road riding. Designed for Hero Performance Platforms FuelX Pro+ is compatible with supported Hero fuel-injected models, including: Xpulse 200 Xpulse 210 Xtreme series (model-specific compatibility applies) It is ideal for riders who want: Adaptive map control Sharper throttle behavior Improved ride comfort Enhanced mid-range performance Why FuelX Pro+ Makes Mechanical Sense Instead of chasing peak dyno numbers, FuelX Pro+ focuses on usable performance. It refines what you feel every day — throttle modulation, torque access, and smooth acceleration. It strengthens control rather than forcing extremes. No permanent ECU changes.No complicated tuning process.No risk to stock mapping integrity. Just adaptive intelligence layered onto factory engineering. Warranty & Authenticity FuelX Pro+ is covered under the official FuelX manufacturer warranty as per their terms and conditions. RawTorque supplies only 100% genuine FuelX units sourced through authorized distribution channels.RawTorque does not provide independent or extended warranty coverage beyond the manufacturer’s policy. Please refer to your Warranty Policy for full details. FuelX Pro+ is built for riders who want control, not chaos — precision, not guesswork.It’s not just a performance add-on.It’s a refinement upgrade engineered for serious riding.

Read more less

PowerTRONIC V4 Piggyback ECU for Bajaj Motorcycles Unlock sharper response, stronger pull, and more precise fueling control with the PowerTRONIC V4 Piggyback ECU — a performance upgrade engineered for Bajaj motorcycles that demand more than stock calibration allows. Designed and developed in India, PowerTRONIC has earned its reputation among tuners and performance enthusiasts for delivering real, measurable improvements without permanently altering the factory ECU. Whether you ride a Dominar, Pulsar, or Avenger platform, the V4 transforms the way your motorcycle accelerates, responds, and behaves across the rev range — without compromising reliability or serviceability. What PowerTRONIC V4 Actually Changes Factory ECUs are calibrated for emissions compliance, fuel efficiency targets, and global operating conditions. While safe and reliable, they often leave performance headroom untapped. PowerTRONIC V4 works as a piggyback ECU. It does not replace your stock ECU — it overlays optimized ignition timing and fuel mapping to improve combustion efficiency and throttle accuracy. The result is: Stronger mid-range torque Sharper throttle response Improved roll-on acceleration Cleaner power delivery Reduced flat spots in the powerband This isn’t artificial peak power marketing. It’s usable performance where riders actually need it — in the mid-range and during throttle transitions. Dual Pre-Tuned Performance Maps The V4 comes preloaded with dual performance maps. These allow riders to switch between different tuning behaviors depending on riding style or terrain. Typically, riders can choose between: A balanced street map for daily riding A more aggressive performance map for spirited use Map switching can be done seamlessly, giving you flexibility without needing constant retuning. Fine-Tune Anytime, Anywhere One of the strongest advantages of the PowerTRONIC ecosystem is customization. Using the PowerTRONIC Control Center software, riders can: Modify fuel maps Adjust ignition parameters Upload new tuning files Save custom setups The system connects via PC, smartphone, or tablet, giving full tuning control without removing the unit. For riders who upgrade exhausts, air filters, or intake systems, this flexibility becomes extremely valuable. You are not locked into a static performance profile. Plug & Play Installation Installation is designed to be straightforward and reversible. No wire cutting.No splicing.No irreversible changes. The harness connects directly to factory connectors. The stock ECU remains untouched and fully functional. If required, the motorcycle can be returned to stock configuration easily. Typical installation time ranges around 30–40 minutes with basic mechanical familiarity. Throttle Response & Ride Feel The most noticeable improvement after installation is throttle precision. Stock mapping often produces: Slight hesitation at low RPM Abrupt throttle transitions Conservative ignition timing PowerTRONIC refines these characteristics. Acceleration becomes more linear. Roll-ons feel immediate. Overtakes require less throttle input. Climbing inclines demands less gear hunting. The bike feels more responsive, not unstable or unpredictable. Increased Power & Torque While exact gains depend on the model and setup, optimized fueling and ignition advance allow the engine to operate closer to its mechanical potential. Benefits include: Improved mid-range torque delivery Stronger acceleration in usable RPM zones Smoother power curves For riders using aftermarket exhaust systems or intake upgrades, the gains are even more pronounced when paired with appropriate tuning. Built for Indian Conditions Indian riding conditions are demanding — heat, dust, humidity, monsoons, vibration. PowerTRONIC V4 is built with automotive-grade electronics and sealed connectors designed to withstand: High ambient temperatures Continuous vibration Water exposure Long-distance touring stress The housing is water and heat resistant, ensuring durability in daily commuting and aggressive riding alike. Who Should Consider PowerTRONIC? This ECU upgrade is ideal for riders who: Want sharper throttle response Feel their bike is restricted from factory tuning Have upgraded exhaust or intake components Want tuning flexibility without replacing the ECU Prefer reversible, non-destructive modifications It is not a cosmetic upgrade. It is a mechanical refinement tool. Compatible Platforms PowerTRONIC V4 is available for multiple Bajaj platforms including: Dominar series Pulsar series Avenger series Model-specific compatibility should always be confirmed before purchase. Warranty & Authenticity This product is covered under the official PowerTRONIC manufacturer warranty as per their terms and conditions. RawTorque supplies only 100% genuine PowerTRONIC products sourced directly from authorized distributors. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. For complete details, refer to the Warranty Policy. PowerTRONIC V4 does not turn your Bajaj into something it isn’t. It simply removes the electronic restraints that hold it back — delivering cleaner fueling, sharper ignition timing, and a ride that feels intentionally engineered rather than factory-limited.

Read more less

FuelX Pro+ Smart Autotune Module for Bajaj Motorcycles – Advanced Plug & Play Performance Control Unlock next-level refinement and performance from your Bajaj motorcycle with the FuelX Pro+ Smart Autotune Module — the most advanced fuel optimization solution in the FuelX lineup. Designed for riders who want complete control over throttle behavior and fuel precision, FuelX Pro+ enhances ride smoothness, improves part-throttle response, and delivers consistent power delivery across varied riding conditions. It works alongside your stock ECU, preserving factory safeguards while intelligently optimizing air-fuel ratios in real time. Unlike basic fuel controllers, the Pro+ version offers deeper adaptability with selectable maps and active rider control. Precision Fuel Optimization Modern fuel-injected engines are tuned conservatively from the factory to meet emissions and global operating standards. This can sometimes result in lean fueling characteristics that affect throttle smoothness, especially in part-throttle riding, traffic conditions, or altitude variation. FuelX Pro+ continuously refines fueling signals to help deliver: More predictable throttle roll-onReduced hesitation at low RPMImproved mid-range consistencySmoother gear transitions The result is a motorcycle that feels more controlled and composed in real-world riding scenarios. 10 Autotune Maps – Adjustable Performance Control FuelX Pro+ comes preloaded with 10 selectable Autotune Maps. These maps allow you to adjust fueling behavior based on riding style and environment. Whether you prefer smoother commuting behavior, stronger mid-range delivery, or optimized touring balance, the Pro+ gives you flexibility without complex tuning software. Map switching is immediate and does not require stopping the motorcycle. Handlebar Map Switch Included The included handlebar-mounted switch allows riders to toggle between maps while riding. No laptop. No diagnostic cable. No service center dependency. This feature is especially useful when moving between: City traffic and open highwaysLow-altitude and high-altitude routesDaily commuting and weekend touring Control remains at your fingertips. Auto Adapt Technology FuelX Pro+ features Auto Adapt Technology that continuously adjusts fueling based on: Ambient temperatureAltitude changesEngine loadRiding conditions It works automatically in the background, eliminating the need for manual remapping when environmental conditions shift. The system is designed to maintain fueling stability even if you install compatible aftermarket components such as air filters or exhaust systems. Plug & Play Installation Installation is straightforward and non-invasive. No wire cuttingNo ECU flashingNo splicingNo permanent modifications The module connects directly to factory connectors and can typically be installed within 15 minutes. The original ECU remains untouched, ensuring reversibility and maintaining OEM reliability. Built for Indian Riding Conditions FuelX Pro+ is built using automotive-grade electronic components with sealed connectors and reinforced harnesses. The system is: Water resistantHeat resistantVibration tolerant Designed to withstand Indian climate variations, long-distance touring conditions, and daily commuting stress. Performance Without Aggressive Over-Tuning FuelX Pro+ is engineered to improve ride quality and throttle behavior, not to deliver unsafe or extreme tuning changes. The focus remains on: RideabilityThrottle precisionSmooth torque deliveryConsistent fueling stability It enhances how the motorcycle feels during acceleration and cruising without compromising engine integrity. Compatible Bajaj Platforms FuelX Pro+ is designed for fuel-injected Bajaj motorcycles including: Dominar seriesPulsar seriesOther compatible FI platforms Always verify exact model compatibility before installation. Key Features Plug & Play Installation – No tuning software required10 Selectable Autotune Maps – Adjustable fueling behaviorHandlebar Map Switch – Instant on-the-go controlAuto Adapt Technology – Automatic environmental compensationImproved Throttle Smoothness – Reduced low-speed jerksWater & Heat Resistant – Reliable in varied conditionsWorks with Stock ECU – No permanent modifications Warranty & Authenticity This product is covered under the official FuelX manufacturer warranty as per their terms and conditions. RawTorque supplies only 100% genuine FuelX products sourced directly from authorized distributors. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. Please refer to your Warranty Policy for full terms.

Read more less

Upgrade your Honda motorcycle’s performance with the FuelX Pro+, a next-generation Smart Autotune Module engineered to optimize throttle response, reduce jerks, and enhance rideability. Designed to deliver smooth power delivery and adaptive tuning, FuelX Pro+ automatically adjusts fuel mapping based on real-world conditions — ensuring peak performance across terrains, climates, and altitudes. Built with 10 Autotune Maps, a Handlebar Map Switch, and Auto Adapt Technology, the FuelX Pro+ lets you switch between maps instantly — allowing your bike to adapt to your riding style on the go. Each module is plug-and-play, requiring no complex setup or ECU flashing. Crafted from automotive-grade components, the FuelX Pro+ is water and heat resistant, built to withstand the harshest riding conditions. 🧠 Key Highlights ✅ Plug & Play installation (no cutting or splicing required) 🔁 10 Autotune Maps – Adjust fuel trims for any condition 🕹️ Handlebar Map Switch for on-road tuning control 🧠 Auto Adapt technology for real-time engine optimization 💧 Water & Heat Resistant – built to last in all conditions ⚙️ Constructed from premium automotive-grade components 🧾 Specifications Brand: FuelX / Race Dynamics Model: Pro+ Compatibility: Honda Motorcycles  Installation Time: ~15 minutes Warranty: Covered under the official manufacturer’s 2-year limited warranty (as per brand terms).RawTorque facilitates all warranty claims directly with the authorized FuelX support network.For full details, please refer to our Warranty Policy.

Read more less

Unlock the real performance potential of your Honda with the PowerTRONIC V4 Piggyback ECU, engineered by Race Dynamics for riders who demand sharper throttle response, stronger mid-range torque, and refined power delivery without compromising engine reliability. This is not a cosmetic upgrade. It is a precision electronic tuning module that gives you calibrated control over fueling and ignition parameters — transforming how your motorcycle accelerates, responds, and performs across the rev range. Designed as a true plug-and-play system, the PowerTRONIC V4 installs without cutting factory wires or permanently modifying the stock ECU. Your original ECU remains intact while the V4 optimizes performance through intelligent signal control. What the PowerTRONIC V4 Actually Does Modern motorcycles are factory-tuned conservatively to meet emission regulations and broad global operating conditions. This often results in lean fueling, restricted ignition timing, and slightly muted throttle response. PowerTRONIC V4 addresses this by: • Optimizing air-fuel ratio• Adjusting ignition timing• Improving throttle signal interpretation• Refining power delivery across RPM bands The result is noticeably smoother acceleration, stronger pull in mid-range RPMs, and more immediate throttle feedback. You don’t get unpredictable spikes. You get controlled, usable performance. Real-World Performance Benefits Sharper Throttle ResponseThrottle roll-ons feel immediate and precise, especially during overtakes or aggressive riding. Improved Torque DeliveryMid-range torque becomes more accessible, reducing the need for frequent downshifts. Smoother Power CurveAcceleration feels linear and progressive instead of flat or jerky. Reduced HesitationImproves throttle transitions during gear shifts and part-throttle riding. Whether you're riding in city traffic, on highways, or during spirited weekend rides, the improvement is instantly noticeable. Dual Pre-Tuned Performance Maps The PowerTRONIC V4 comes preloaded with dual maps calibrated for your specific Honda model. Riders can switch between maps depending on riding preference or setup (stock exhaust vs aftermarket, for example). For advanced users, maps can be: • Customized• Edited• Uploaded via PC, smartphone, or tablet• Fine-tuned through PowerTRONIC Control Center software This flexibility makes it suitable for both everyday riders and serious tuners. Plug & Play Installation Installation is straightforward and reversible. • No wire cutting• No ECU flashing• No permanent modifications• Typical install time: ~40 minutes It connects using model-specific harnesses designed to integrate cleanly with Honda’s factory wiring system. Built for Indian Riding Conditions PowerTRONIC V4 is engineered in India and tested for real-world heat, humidity, dust, and vibration. It features: • Automotive-grade internal components• Sealed connectors• Water-resistant construction• Heat-resistant housing• Vibration-proof circuitry This is designed for long-term reliability, not temporary gains. Compatible Honda Models Model-specific variants are available for: • Honda CB350RS• Honda H’ness CB350• Honda CB300R• Honda Hornet 2.0• Honda CB200X• Other compatible EFI Honda models (variant-dependent) Always select the correct model option while purchasing. Who Is This For? The PowerTRONIC V4 is ideal for: • Riders seeking sharper throttle feel• Owners installing aftermarket exhausts• Touring riders wanting smoother mid-range torque• Enthusiasts looking for more engaging performance• Tuners who want full fueling control It is not a random power booster. It is a controlled, precision performance upgrade. Technical Overview Brand: PowerTRONIC (Race Dynamics)Model: V4 Piggyback ECUFunction: Fuel + Ignition OptimizationInstallation: Plug & PlayMap Support: Dual Preloaded Maps + Custom Map CapabilityTuning Access: PC / Smartphone / TabletCountry of Origin: India Important Notes • Professional installation is recommended for optimal setup.• Performance gains may vary depending on motorcycle condition and modifications.• Designed to work with stock or compatible aftermarket setups (model-specific). Warranty & Authenticity This product is covered under the official PowerTRONIC manufacturer warranty as per Race Dynamics’ terms and conditions. RawTorque supplies only 100% genuine PowerTRONIC ECUs sourced directly from authorized distributors. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. For full coverage details, please refer to our Warranty Policy. If you want your Honda to feel sharper, more responsive, and mechanically alive without compromising factory reliability, the PowerTRONIC V4 delivers controlled performance — not gimmicks, not noise, just calibrated power where it matters.

Read more less

Bring refined throttle control and smoother ride quality to your Honda with the FuelX Lite Smart Autotune Module — a precision-engineered plug-and-play fueling optimizer developed by Race Dynamics. Built for riders who want improved rideability without diving into complex tuning, FuelX Lite intelligently adjusts the air-fuel ratio in real time to deliver a calmer, cooler, and more responsive motorcycle. Modern engines are calibrated lean from the factory to meet emission norms. While compliant, this often results in slight throttle hesitations, low-speed jerkiness, and additional engine heat. FuelX Lite addresses this at the source — optimizing fueling dynamically so your Honda feels smoother and more predictable across everyday riding conditions. What FuelX Lite Does FuelX Lite continuously monitors engine parameters and adjusts fueling within the closed-loop operating range. It works automatically — no map selection, no switches, no manual intervention. The system: • Improves throttle transition smoothness• Reduces low-RPM jerks• Enhances part-throttle rideability• Lowers engine and exhaust temperatures (up to ~10% under typical riding conditions)• Maintains factory reliability The result is not aggressive power spikes. It is refined, usable performance — especially noticeable in city traffic, slow riding, and steady cruising. Plug & Play Simplicity Installation is straightforward and completely reversible. • No wire cutting• No ECU flashing• No remapping• No specialized tools• Typical install time: ~15 minutes FuelX Lite connects using model-specific harnesses designed to integrate cleanly with Honda’s stock wiring. Your factory ECU remains untouched. This makes it ideal for riders who want better ride quality without permanent modification. Real-World Benefits Smoother Throttle FeelThrottle roll-on becomes more linear and predictable, reducing hesitation during gear shifts or low-speed riding. Reduced Engine HeatOptimized fueling helps manage combustion efficiency, which can reduce engine and exhaust temperatures in real-world conditions. Improved Ride ComfortLess jerkiness means easier traffic navigation and smoother long-distance cruising. Consistent Performance Across ConditionsAuto Adapt Technology responds to changes in altitude, air density, and temperature — making it suitable for touring and varied terrains. Built for Indian Riding Conditions FuelX Lite is engineered with durability in mind. • Automotive-grade internal components• Sealed, water-resistant connectors• Heat-resistant housing• Vibration-tolerant circuitry Designed and developed in India, it is tested for real-world riding environments — including heat, humidity, dust, and long-distance touring use. Compatibility Model-specific variants are available for popular Honda motorcycles, including: • Honda CB350RS• Honda H’ness CB350• Honda CB300R• Honda Hornet 2.0• Honda CB200X• Other compatible EFI Honda models (variant dependent) Always select the correct model option while purchasing to ensure proper harness compatibility. Who Is FuelX Lite For? FuelX Lite is ideal for: • Riders experiencing low-speed jerkiness• Daily commuters wanting smoother throttle feel• Touring riders seeking improved comfort• Owners installing mild intake or exhaust upgrades• Riders who want better rideability without map switching It is not a race-tuned ECU replacement. It is a refinement tool designed to improve how your motorcycle feels in everyday use. Technical Specifications Brand: FuelX (Race Dynamics)Model: FuelX LiteType: Smart Closed-Loop Fuel OptimizerInstallation: Plug & PlayMaps: Single Autotune Map (Automatic Adjustment)Country of Origin: India Important Notes • Designed to enhance rideability within the stock ECU framework.• Performance improvements vary based on motorcycle condition and setup.• Professional installation is recommended if unsure about fitment. Warranty & Authenticity This product is covered under the official FuelX manufacturer warranty as per their terms and conditions. RawTorque supplies only 100% genuine FuelX products sourced directly from authorized distributors. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. For complete details, please refer to our Warranty Policy. If your Honda feels slightly hesitant, jerky at low speeds, or hotter than it should during daily use, FuelX Lite delivers a smarter, smoother riding experience — without altering your motorcycle’s core reliability.

Read more less

The PowerTRONIC V4 Performance ECU is an advanced plug-and-play piggyback engine control module designed specifically for Royal Enfield motorcycles. It is engineered for riders who want sharper throttle response, improved torque delivery, smoother acceleration, and refined fueling control — without permanently modifying the stock ECU. Unlike generic tuning devices, the PowerTRONIC V4 ECU works by intelligently adjusting fueling and ignition parameters in real time. It connects directly to your motorcycle’s stock wiring harness, allowing seamless integration without cutting wires or flashing the factory ECU. This means performance gains remain reversible while maintaining factory reliability standards. Advanced Fueling & Ignition Control The PowerTRONIC V4 Performance ECU for Royal Enfield continuously monitors engine inputs and optimizes the air-fuel ratio for improved combustion efficiency. By refining fueling delivery and ignition timing, the module enhances throttle crispness and mid-range pull — two areas where most riders immediately notice improvement. This results in: • Smoother acceleration across RPM range• Reduced throttle lag• Improved ride refinement in traffic and touring conditions• Stronger roll-on performance during overtakes Because Royal Enfield engines respond well to optimized fueling, the V4 ECU delivers noticeable improvements without compromising long-term durability. Dual Pre-Tuned Maps & Adaptive Capability The PowerTRONIC V4 ECU comes with dual pre-configured performance maps developed specifically for Royal Enfield platforms. Riders can switch between maps depending on riding conditions or modifications such as aftermarket exhaust systems. The module also supports advanced tuning access through compatible software. This allows experienced users to fine-tune fueling parameters for specific setups, altitudes, or riding styles. For most users, however, the pre-loaded maps deliver significant improvement right out of the box. True Plug & Play Installation Installation is completely plug-and-play. The PowerTRONIC V4 Performance ECU connects to the stock harness using model-specific connectors. No ECU flashing, no soldering, and no dyno session is mandatory for baseline operation. Once installed: • The module automatically begins adaptive fueling• Factory ECU remains untouched• No permanent changes are made to the motorcycle This makes the V4 a practical upgrade for riders who want performance without invasive modification. Built for Real-World Riding Constructed using automotive-grade electronics, the PowerTRONIC V4 ECU is heat-resistant, vibration-resistant, and weather-protected for Indian riding conditions. Whether you ride through city congestion, long-distance highways, or varying altitude zones, the system adapts to maintain consistent performance. The result is improved throttle smoothness during daily commuting, stronger mid-range during highway cruising, and enhanced rideability during touring. Performance Without Compromise The goal of the PowerTRONIC V4 Performance ECU for Royal Enfield motorcycles is not extreme racing output. It is controlled, refined, usable performance. Riders typically report: • More responsive throttle feel• Smoother engine character• Cleaner acceleration• Reduced jerkiness at low RPM Because the stock ECU remains active, factory safety parameters continue functioning as intended. Compatibility (Variant Selection Required) The PowerTRONIC V4 ECU is available for the following Royal Enfield models: • Royal Enfield Himalayan 411 EFI (2020–2023)• Royal Enfield Himalayan 450 (2024–2025)• Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Classic 350 (J-Series)• Royal Enfield Meteor 350• Royal Enfield Hunter 350 Select the correct motorcycle variant before purchase to ensure proper fitment. Technical Overview Brand: PowerTRONICProduct Type: Performance Piggyback ECUInstallation Type: Plug & PlayMaps: Dual Pre-Tuned MapsFueling Control: Real-Time Adaptive AdjustmentApplication: Royal Enfield MotorcyclesWarranty: As per official PowerTRONIC manufacturer policy What’s Included • PowerTRONIC V4 Performance ECU Module• Model-Specific Wiring Harness• Mounting Accessories (as provided by manufacturer) No additional hardware is assumed unless shown in product images.

Read more less

Maddog Scout Performance Auxiliary Lights | 3000 Lumens | 10W Compact LED | 18-Month Warranty Compact size. Serious visibility. The Maddog Scout Performance Auxiliary Lights are built for riders who value clear visibility in a compact and efficient design. Delivering 3000 lumens per pair while drawing only 10W per light, these lights offer powerful illumination without overloading your bike’s electrical system. Encased in a rugged black gloss aluminum body, the Scout delivers durability and style in equal measure. With its precision-engineered beam pattern, it improves road clarity in low-light conditions, enhances night-time safety, and adds a sleek aesthetic upgrade to your motorcycle or off-road vehicle. Perfect for daily commuters and touring riders, the Scout represents Maddog’s engineering in its purest, most compact form — reliable, efficient, and built to last. ⚙️ Key Features 3,000 lumens brightness per pair 10W low power draw per light Compact design ideal for motorcycles and scooters IP-rated for dust and water resistance Gloss black aluminum body — corrosion and impact resistant Precision beam optics for superior road illumination Includes Maddog’s signature performance-grade build quality Exclusive 18-month manufacturer warranty 📦 Kit Contents Each Maddog Scout kit includes everything you need for quick and easy installation. In the Box: ✅ A pair of Maddog Scout Performance Lights ✅ A pair of basic stainless steel (SS) clamps ✅ Warranty card ✅ Screw kit ✅ Tail connectors ⚡ Compatibility Universal fitment — compatible with: Motorcycles, scooters, and commuter bikes Touring and ADV setups SUVs and off-road vehicles Maddog wiring harness kits, switches, and dimmers (sold separately) (Professional installation recommended for best wiring and alignment results.) 🧠 Why Buy from RawTorque At RawTorque, we stock only genuine, performance-verified products from trusted brands.Every Maddog light we sell is brand-authorized, ensuring authenticity, reliability, and superior after-sales support. We’re not just a store - we’re an enthusiast-driven platform, bringing premium-grade performance lighting to riders who take their vision seriously. 🛡️ Warranty & Support This product is backed by an official Maddog manufacturer warranty, offering 18 months of replacement coverage from the date of purchase (as per brand warranty terms). RawTorque does not offer additional warranty, but we provide full assistance in facilitating warranty claims with Maddog’s authorized support network. For detailed coverage information, please visit our Warranty Policy.

Read more less

Maddog Alpha Performance Auxiliary Lights | 9,600 Lumens | 40W | IP67 Rated Performance meets precision. The Maddog Alpha Performance Auxiliary Lights set the benchmark for illumination in their class. Delivering a powerful 9600 lumens per pair at only 40W per light, these IP67-rated lights combine incredible brightness, refined beam focus, and efficient power consumption. Encased in a high-strength aluminum housing with a black gloss finish, the Alpha doesn’t just perform — it impresses. Designed to withstand heat, vibration, and harsh weather, it’s the perfect balance of power, style, and endurance for all types of rides and terrains. Whether mounted on motorcycles, 4x4s, or touring SUVs, the Alpha delivers clear visibility, long throw distance, and balanced spread, ensuring safety and performance during every drive. ⚙️ Key Features 9,600 lumens brightness per pair 40W efficient power draw per light IP67-rated for dust and water resistance Focused hybrid beam pattern for superior range and clarity Gloss black aluminum body — lightweight, corrosion-resistant Compatible with Maddog wiring harness kits and switches (sold separately) Universal mounting design — fits bikes, cars, and SUVs Exclusive 18-month manufacturer warranty 📦 Kit Contents Each Maddog Alpha kit includes everything you need for installation and setup. In the Box: ✅ A pair of Maddog Alpha Performance Lights ✅ A pair of basic stainless steel (SS) clamps ✅ Warranty card ✅ Screw kit ✅ Tail connectors ⚡ Compatibility Universal fitment — suitable for: Motorcycles (naked, touring, ADV, cruiser) SUVs and off-road vehicles Compatible with Maddog wiring harness, switch, and dimmer kits (sold separately) (Professional installation recommended for best results.) 🧠 Why Buy from RawTorque At RawTorque, every product we offer is genuine, performance-verified, and sourced from trusted manufacturers.Our mission is to bring engineered performance gear to enthusiasts who demand reliability and precision in every upgrade. When you buy from us, you’re investing in tested quality, authentic parts, and transparent warranty support. 🛡️ Warranty & Support This product is covered under an official Maddog manufacturer warranty, providing 18 months of replacement coverage from the date of purchase (as per the brand’s policy). RawTorque does not provide additional warranty, but our support team assists with warranty claims via Maddog’s authorized service network. For more details, please refer to our Warranty Policy.

Read more less

Maddog Delta Performance Auxiliary Lights | 6400 Lumens | 30W Compact LED | 18-Month Warranty Compact design. Unmatched clarity. The Maddog Delta Performance Auxiliary Lights redefine what compact lighting can do. Designed to deliver a striking 6400 lumens per pair at just 30W per light, these lights pack serious brightness into a minimal, rugged body — ideal for both motorcycles and off-road vehicles. Housed in a black gloss aluminum casing, the Delta is engineered for durability, heat management, and precision light control. With an optimized beam pattern, it offers an exceptional balance of throw and spread — ensuring maximum visibility on highways, trails, and city roads alike. Built for riders and drivers who value performance and practicality, the Delta is the perfect choice for compact installations without sacrificing output or reliability. ⚙️ Key Features 6,400 lumens brightness per pair 30W efficient power draw per light Optimized beam for clear visibility in all conditions IP-rated water and dust protection High-quality aluminum body with corrosion-resistant finish Compact, universal design – suitable for bikes and SUVs Compatible with Maddog harness kits (sold separately) Exclusive 18-month manufacturer warranty 📦 Kit Contents Each Maddog Delta kit includes all essential components for a seamless installation. In the Box: ✅ A pair of Maddog Delta Performance Lights ✅ Basic stainless steel (SS) clamps ✅ Warranty card ✅ Screw kit ✅ Tail connectors ⚡ Compatibility Universal fit for most motorcycles, SUVs, and off-road vehicles.Compatible with Maddog wiring harness kits, switches, and dimmers (sold separately). (Ensure proper relay connection for optimal performance.) 🧠 Why Buy from RawTorque At RawTorque, we don’t just list products — we curate engineering-grade performance gear.Every Maddog product is authentic, brand-certified, and thoroughly quality-checked to ensure reliability, longevity, and premium light output. With verified warranty coverage and enthusiast-level after-sales support, you get gear that’s as dependable as your ride. 🛡️ Warranty & Support This product is covered under an official Maddog manufacturer warranty, offering 18 months of replacement coverage from the date of purchase (as per brand policy). RawTorque does not provide any additional warranty beyond the manufacturer’s coverage. However, our support team assists in coordinating warranty claims with Maddog’s authorized channels. For full details, please refer to our Warranty Policy.

Read more less

Maddog Rage Performance Auxiliary Lights | 11,600 Lumens | 90% Spot Beam | 45W | IP67 Dominate the dark with focused precision. The Maddog Rage Performance Auxiliary Lights are engineered for riders who demand raw intensity and maximum reach. Designed to deliver a blistering 11,600 lumens per pair, the Rage combines a 90% spot and 10% flood beam pattern - ensuring long-distance throw with just enough spread to illuminate your periphery. Drawing only 45W per light, this system achieves remarkable brightness with efficient power consumption. Encased in a sleek, black gloss aluminum housing, the Rage offers durability, style, and weather resistance in one compact form. Perfect for riders tackling night rides, foggy trails, or long touring routes - this is performance you can rely on, ride after ride. ⚙️ Key Features 11,600 lumens brightness per pair 90% Spot + 10% Flood beam pattern 45W low power draw per light IP67-rated – water and dust resistant High-gloss black aluminum housing - corrosion-resistant and heat efficient 5000K–5700K color temperature for natural white light Maddog-approved build quality Exclusive 18-month manufacturer warranty 📦 Kit Contents Each Maddog Rage kit includes everything needed for a complete, ready-to-install setup. In the Box: ✅ A pair of Maddog Rage Performance Lights ✅ A pair of basic SS clamps ✅ Warranty card ✅ Screw kit ✅ Tail connectors ⚡ Compatibility ✅ Compatible with Maddog Wire Harness Pro and Dual Switch Pro (sold separately)❌ Not compatible with Maddog Dimmer or non-standard wire harness kits 🧠 Why Buy from RawTorque At RawTorque, we list only genuine, performance-verified products from trusted brands.Every Maddog unit we sell is authentic, performance-tested, and backed by official brand warranty.Our curation focuses on quality, safety, and precision - built for serious riders who settle for nothing less than engineered performance. 🛡️ Warranty & Support This product is covered under an official Maddog manufacturer warranty, offering 18 months of replacement coverage from the date of purchase (as per the brand’s terms and conditions). RawTorque does not provide any additional warranty beyond the manufacturer’s coverage. However, our support team is happy to assist customers in coordinating warranty claims through Maddog’s authorized service channels.For full details, please refer to our Warranty Policy

Read more less

Maddog Lycan Performance Auxiliary Lights | 10,800 Lumens | Dual-Mode Spot + Flood | 40W Each | Wire Harness Pro & Dual Switch Pro Included | 18-Month Warranty -Illuminate your ride with confidence. The Maddog Lycan Performance Auxiliary Lights are engineered for riders who demand uncompromised power and precision after dark. Featuring a dual-mode hybrid beam system, the Lycan delivers a massive 10,800 lumens per pair with independent control over spot and flood functions - perfect for both long-distance visibility and wide-angle road coverage. Encased in a sleek black aluminum housing with a gloss finish, these lights are as durable as they are dynamic. With 60% spot throw and 40% flood spread, each beam can be independently switched, giving you complete command of your lighting profile - on or off the trail. The Lycan runs efficiently at just 40W per light, ensuring maximum brightness with minimal battery strain. Designed for serious touring, off-roading, and adventure riding, it’s built to perform wherever your journey leads. ⚙️ Key Features 10,800 lumens brightness per pair Dual-mode hybrid beam: 60% Spot + 40% Flood Independently switchable light modes High-gloss black aluminum body - durable and corrosion-resistant Low power draw - 40W each Maddog Wire Harness Pro & Dual Switch Pro included IP-rated for weather and dust protection Exclusive 18-month manufacturer warranty 📦 Kit Contents Each Maddog Lycan kit includes everything you need for a clean, plug-and-play installation. In the Box: ✅ A pair of Maddog Lycan Performance Lights ✅ A pair of basic SS-Clamps ✅ Maddog Wire Harness Pro ✅ Dual Switch Pro ✅ Warranty card ✅ Screw kit ✅ Tail connectors ⚡ Compatibility ✅ Compatible: Maddog Wire Harness Pro, Dual Switch Pro❌ Not compatible: Maddog Dimmer, Standard Wire Harness, Dual Wire Harness Pro 🧠 Why Buy from RawTorque At RawTorque, every product we list is 100% genuine, performance-tested, and verified by enthusiasts.We stock only manufacturer-authorized products, ensuring quality, reliability, and full after-sales support. 🛡️ Warranty & Support This product is covered under an official Maddog manufacturer warranty, offering 18 months of replacement coverage from the date of purchase (as per the brand’s terms and conditions). RawTorque does not provide any additional warranty beyond the manufacturer’s coverage. However, our team will gladly assist customers in initiating and coordinating warranty claims through authorized Maddog service channels.For complete details, please refer to our Warranty Policy

Read more less

Simtac M4D (NVSM4D) 5-Inch Motorcycle Navigation System with Dual 1080p Cameras | Android Auto & Apple CarPlay | IP67 | 12V–36V Compatible | 1-Year Warranty Ride smarter. Record everything. Stay connected. The Simtac M4D (NVSM4D) is a purpose-built 5-inch motorcycle navigation and recording system designed for riders who want real-time navigation, dual-camera documentation, and seamless smartphone connectivity in one compact unit. Built for daily commuters and long-distance tourers alike, the M4D integrates Android Auto, Apple CarPlay, and dual 1080p cameras into a glove-friendly touchscreen interface — ensuring that every ride is guided, recorded, and protected. Integrated Navigation with Smartphone Connectivity The M4D supports Android Auto and Apple CarPlay, allowing riders to mirror essential smartphone apps directly onto the 5.0″ display. This enables access to: • Google Maps and other navigation apps• Music streaming services• Call management• Voice assistant functionality Navigation runs through your smartphone while the display provides a clean, ride-focused interface. No complicated pairing systems or secondary devices required. Dual 1080p HD Cameras – Front & Rear The system includes dual 1080p HD cameras that continuously record both forward and rear views while riding. Key recording features include: • Full HD 1080p recording (front and rear)• Loop recording (automatically overwrites old footage)• Built-in G-sensor for impact detection• Event lock to preserve critical footage during shocks or crashes The G-sensor ensures that important clips are protected from being overwritten, providing added security in case of accidents or unexpected incidents. 5.0″ Glove-Friendly Touchscreen The 5-inch display is engineered for motorcycle use. • Responsive touchscreen interface• Operable with riding gloves in most conditions• Clear visibility for navigation and camera preview The UI is simplified for riding scenarios, reducing distractions while maintaining essential access to navigation and system controls. Built for Harsh Riding Conditions Both cameras carry an IP67 waterproof rating, making them suitable for: • Rain riding• Dusty environments• Mud and road spray exposure The main unit supports 12V–36V compatibility, allowing installation across a wide range of motorcycles and scooters. This wide voltage range ensures stable performance without electrical strain. Expandable Storage The system supports microSD cards up to 256GB (64GB officially recommended). This allows extended recording duration depending on resolution and storage capacity selected. Simple Installation The M4D includes a complete mounting and wiring kit designed for clean motorcycle integration. Installation components include: • Mounting bracket and fittings• Power and connection wiring harness• Front and rear cameras• User manual and warranty card Professional installation is recommended for optimal wiring safety and placement. Package Contents • Simtac M4D Main Unit• Front 1080p HD Camera• Rear 1080p HD Camera• Mounting Bracket & Fittings• Wiring Harness (Power & Connection Cables)• User Manual• Warranty Card Only components listed above are included. Ideal For • Daily commuting• Touring and highway riding• Riders seeking accident documentation• Navigation-focused riders• All-weather motorcycle usage The Simtac M4D is not just a navigation device. It is a ride documentation and connectivity system built specifically for motorcycles. 🛡️ Warranty & Support This product is covered under an official Simtac manufacturer warranty, offering 12 months of coverage from the date of purchase (as per the brand’s terms and conditions). RawTorque does not provide any additional warranty beyond the manufacturer’s coverage. However, our team will gladly assist customers in initiating and coordinating warranty claims through authorized Simtac service channels. For complete details, please refer to our Warranty Policy.

Read more less

Simtac M10D Motorcycle Navigation System with Dual DVR | Android Auto & Apple CarPlay Upgrade the way you ride with the Simtac M10D (NVSM10D) Motorcycle Navigation System — a purpose-built smart riding display designed to integrate navigation, recording, and connectivity into one dedicated motorcycle unit. Unlike standard phone mounts or temporary solutions, the M10D is engineered specifically for motorcycle environments. It combines structured navigation support, dual camera recording, and smartphone integration in a format designed to remain stable, visible, and reliable under real riding conditions. At the center of the system is a 5.5-inch glove-friendly touchscreen display. The screen is optimized for outdoor use, offering clarity and responsive control even while wearing riding gloves. The layout is built to minimize distraction while giving riders immediate access to essential riding information. The M10D supports Android Auto and Apple CarPlay, allowing riders to mirror supported apps from their smartphones directly onto the display. Navigation apps, music streaming, calls, and voice assistants become accessible without physically handling the phone. This reduces the need to check pockets or tank bags during rides and keeps attention where it belongs — on the road. Beyond smartphone integration, the device features dual HD DVR cameras — one front and one rear. These cameras continuously record your rides, offering documentation for touring, daily commuting, or safety purposes. Video footage can be stored on a compatible MicroSD card, allowing riders to archive, review, or transfer recordings as needed. For riders who travel beyond consistent network coverage, the M10D includes offline GPS navigation support. This ensures turn-by-turn guidance even when mobile data is unavailable. Whether navigating remote highways, hill stations, or rural routes, the system remains functional without dependency on constant connectivity. Durability is critical for motorcycle electronics. The Simtac M10D is built with an IP67 waterproof and dust-resistant rating, protecting the unit against heavy rain, dust ingress, and splash exposure. The housing and connectors are designed to tolerate vibration, road shock, and varying environmental conditions typical of Indian riding scenarios. The system supports 12V and 36V motorcycle electrical setups, increasing compatibility across a wide range of motorcycles and electric two-wheelers. Bluetooth functionality enables pairing with compatible helmet intercom systems, allowing riders to manage calls and audio hands-free. This enhances convenience while maintaining focus and safety during movement. A handlebar-mounted remote control is included, allowing riders to switch screens or functions without touching the main display. This adds an ergonomic advantage, especially during navigation changes or DVR management. Installation is structured as plug-and-play. The mounting system is compatible with handlebar setups or navigation brackets, and the wiring layout is designed to maintain a clean cockpit appearance without excessive modifications. The Simtac M10D is not a basic accessory. It is a dedicated riding interface that centralizes navigation, recording, and connectivity into a stable, weather-resistant platform designed specifically for motorcycles. Key Features 5.5-inch glove-friendly touchscreen display Android Auto & Apple CarPlay integration Offline GPS navigation capability Dual HD DVR (Front and Rear) IP67 waterproof and dust-resistant construction Bluetooth connectivity for helmet intercom pairing USB-C power support MicroSD expandable storage support Handlebar remote control included Compatible with 12V and 36V systems Plug-and-play installation design Technical Specifications Model: Simtac M10D (NVSM10D)Display: 5.5-inch TouchscreenWaterproof Rating: IP67Camera Setup: Dual HD DVR (Front + Rear)Connectivity: Bluetooth, Android Auto, Apple CarPlayVoltage Compatibility: 12V – 36VStorage: MicroSD SupportedInstallation Type: Handlebar / Navigation Mount Warranty & Authenticity This product includes a 1-Year Manufacturer Warranty as per Simtac’s official terms.RawTorque supplies 100% genuine Simtac products sourced directly from authorized distribution channels. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete details.

Read more less

Simtac NVSM10DT 5-Inch Motorcycle Navigation System with Dual DVR Navigate smarter and ride safer with the Simtac NVSM10DT 5-Inch Motorcycle Navigation System, engineered for riders who rely on accurate navigation and real-time ride recording. Designed specifically for motorcycle environments, this all-in-one system combines offline GPS navigation, dual camera DVR functionality, Bluetooth connectivity, and Wi-Fi support in a compact, weather-resistant unit. This is not a repurposed car unit or a basic phone mount solution. The NVSM10DT is purpose-built for motorcycles — designed to remain stable, visible, and responsive in rain, dust, vibration, and long-distance touring conditions. It centralizes navigation, recording, and connectivity into one integrated device so your cockpit stays clean and functional. At its core is a vivid 5-inch touchscreen display, optimized for clarity and easy interaction while riding. The screen is glove-friendly, allowing you to operate essential functions without removing riding gloves. The interface layout is designed to prioritize visibility, ensuring navigation prompts and ride information remain readable even during bright daylight conditions. Built for Real-World Riding Conditions Motorcycle electronics face constant vibration, changing weather, dust exposure, and temperature variation. The NVSM10DT carries an IP67 waterproof rating, meaning it is sealed against dust ingress and can withstand heavy rain conditions. This makes it suitable for touring, commuting, and extended highway usage. The integrated Android-based system enables offline GPS navigation, providing turn-by-turn guidance without depending on mobile data connectivity. In remote areas where signal drops, navigation remains functional. For riders covering long distances or exploring unfamiliar routes, offline capability ensures uninterrupted route tracking. The system is compatible with standard motorcycle electrical systems and is designed for stable performance during continuous riding hours. Dual Camera DVR Recording A major strength of the NVSM10DT is its front and rear dual camera DVR setup. Both cameras record simultaneously, capturing high-definition footage of your ride from multiple angles. This functionality supports: Recording travel footage Maintaining ride logs Capturing road incidents Additional safety documentation The recording system supports expandable MicroSD storage, allowing users to store, review, and transfer footage as needed. The expandable storage design supports longer ride recordings without constant file management interruptions. For riders who tour frequently or prefer documented ride history, dual DVR adds measurable functional value beyond navigation. Seamless Connectivity The NVSM10DT includes Bluetooth connectivity, enabling pairing with compatible helmet intercom systems. This integration allows riders to: Receive navigation voice prompts Handle calls hands-free Stream audio By routing communication through the navigation system, riders reduce the need to interact directly with their smartphones while riding. Built-in Wi-Fi support enables easier system updates and data management when connected to a network. This simplifies firmware updates and file transfers without complicated procedures. Touring-Ready Integration Long-distance riding requires reliability and clear cockpit organization. The NVSM10DT mounts securely to handlebars or navigation brackets using the included hardware, maintaining stability even under vibration. Its compact design avoids clutter while centralizing key functions: Navigation Ride recording Communication support Instead of mounting separate devices for cameras, GPS, and phone connectivity, riders can operate a single integrated unit. The device is suited for: Daily commuters Long-distance tourers Adventure riders Highway riders Safety-focused riders It enhances riding awareness while keeping distractions minimal. Key Features 5-Inch Glove-Friendly Touchscreen Display Offline GPS Navigation (Android-Based) Dual Front & Rear HD DVR Cameras IP67 Waterproof & Dust Resistant Bluetooth Connectivity Built-In Wi-Fi Support Expandable MicroSD Storage Motorcycle-Specific Mounting Design What’s Included 1 × Simtac NVSM10DT Display UnitFront & Rear Camera UnitsMounting HardwareWiring Harness Warranty & Authenticity This product carries the official manufacturer warranty as per Simtac’s policy. RawTorque supplies only genuine Simtac units sourced through authorized distribution channels. RawTorque does not provide independent or extended warranty coverage beyond the manufacturer’s terms. Please refer to your Warranty Policy for full details.

Read more less