Motorcycle | Rawtorque

Rolon BPR brass-plated sealed chain and sprocket kit for the KTM Duke 250. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HXRC-112-2 Front sprocket 14T (S 02 552), 2 holes Rear sprocket 46T (S 02 677), 6 holes Rolon kit reference HXRC 372NF Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the KTM Duke 390 (pre-2024 models). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HXRC-112-2 Front sprocket 15T (S 02 560), 2 holes Rear sprocket 45T (S 02 499), 6 holes Rolon kit reference HXRC 268 Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength For the 2024 Gen 3 Duke 390 use kit HXRC 453NF instead. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the KTM Duke 390 Gen 3 (2024 onwards). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520HXRC-111+1 Front sprocket 14T (S-02-1281), 2 holes Rear sprocket 43T (S-02-1149), 6 holes Rolon kit reference HXRC 453NF Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength This is the 2024 Gen 3 Duke 390 kit and uses different gearing from the earlier Duke 390. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Royal Enfield Thunderbird Twinspark 350. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R1595BSORC-100-1 Front sprocket 15T (S 01 446/FB), 2 holes Rear sprocket 38T (S 01 009) Rolon kit reference BSORC TBTS F403 Why the BPR kit Sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Royal Enfield Thunderbird 500, Thunderbird X 500 and Classic Stealth Black 500. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R1595BSORC-102-1 Front sprocket 18T (S 02 456), 2 holes Rear sprocket 38T (S 01 490), 6 holes Rolon kit reference BSORC CL 273 Why the BPR kit Sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength This is the UCE 500 rear-disc kit. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Royal Enfield Thunderbird 350, Thunderbird X 350, Classic Gunmetal Grey and Classic Signals 350. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R1595BSORC-102-1 Front sprocket 16T (S 02 454), 2 holes Rear sprocket 38T (S 01 490), 6 holes Rolon kit reference BSORC CL 272 Why the BPR kit Sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength This is the UCE 350 rear-disc kit and does not fit the J-platform Meteor, Hunter or Classic Reborn. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Royal Enfield Bullet 500 and Classic 500 (UCE engine). Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R1595BSORC-102-1 Front sprocket 18T (S 02 456) Rear sprocket 38T (S 01 009), 2 holes Rolon kit reference BSORC CL 271 Why the BPR kit Sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength This is the UCE 500 kit and does not fit the J-platform Classic 350 Reborn. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model you have.

Read more less

Rolon BPR brass-plated sealed chain and sprocket kit for the Royal Enfield Shotgun 650. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R520ACRC-105+1 Front sprocket 15T (S-02-1025) Rear sprocket 40T (S-02-1024), 5 holes Rolon kit reference ACRC 464NF Why the BPR kit Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Hardened sprocket teeth for wear resistance and fatigue strength Rolon is India's largest OE chain manufacturer and supplies chains and kits to motorcycle makers worldwide. Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which variant you have.

Read more less

The 66bhp Super Paddock is a reinforced steel moving platform for people who have to move motorcycles in tight spaces every day. It is aimed at workshops, detailing studios and showrooms rather than at a home garage, and it is built to the duty cycle that implies.The bike sits on the platform and the platform turns. A 360 degree rotating base means a motorcycle can be spun on its own footprint instead of being walked back and forth across a floor, which is the difference between fitting six bikes in a bay and fitting four.Key features Reinforced steel construction 360 degree rotating base Moves and parks a motorcycle within its own footprint Suited to workshops, detailing studios and showrooms Universal fit across most motorcycles FitmentDesigned as a universal platform. Get in touch with your motorcycle and floor layout and we will help you confirm it suits your space.

Read more less

Rapid Cleaner is a fast, chlorine-free brake and parts cleaner. It blasts away oil, grease and brake dust from brakes, clutches and metal components and flashes off without leaving a residue, the standard degreaser for clean, dependable repairs. What it does Removes oil, grease and brake dust from parts Chlorine-free and evaporates without residue Ideal for brakes, clutches and general metal degreasing How to use Spray onto the part, let the dirt and solvent run off, and allow to dry. Re-lubricate any components that need it afterwards. Specifications Article number: 3318 Content: 500 ml Use on: brakes, clutches and metal parts Fitment guidance Designed for metal components. Test first on sensitive plastics or painted surfaces. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Motorbike 4T 15W-50 Street is a fully synthetic engine oil for modern 4-stroke motorcycles. The 15W-50 grade gives a strong, stable film for warm climates and harder use, with excellent cleanliness and wear protection, and is optimised for wet clutches. What it does Fully synthetic protection with a stable film in heat and under load Outstanding engine cleanliness and low wear Optimised for wet clutches, with smooth shifts and clean engagement Specifications Article number: 2555 Also written: 15w50, SAE 15W-50 Viscosity: SAE 15W-50 Content: 1 L Meets / suitable for: API SN; JASO MA2 (wet-clutch compatible) Fitment guidance For 4-stroke motorcycles specifying a 15W-50 / JASO MA2 oil. Check the grade and oil quantity in your owner's manual. Tell us your bike and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

The Motorbike Performance Pack is a complete one-box maintenance treatment for 4-stroke motorcycles, bringing together three Liqui Moly shooters for a clean engine and crisp fuelling at an oil change. The easy way to give your bike the full Liqui Moly treatment in a single step. What is included Engine Flush Shooter (80 ml)cleans the engine internals before draining the old oil 4T Shooter (80 ml)cleans the fuel system and combustion chamber MoS2 Shooter (20 ml)adds an anti-friction film to the fresh oil How to use At an oil change: add the Engine Flush Shooter to the warm old oil and idle, then drain. Fill with fresh oil and add the MoS2 Shooter. Pour the 4T Shooter into a tank of petrol. Follow the directions on each bottle. Specifications Article number: 34207 Contents: 80 ml + 80 ml + 20 ml Use in: 4-stroke motorcycles and scooters Fitment guidance For 4-stroke petrol motorcycles. If your bike has an oil-bath wet clutch, confirm an oil additive is permitted for your model before using the MoS2 Shooter. Tell us your bike and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Silicone Spray is a clean, versatile lubricant and protectant for rubber, plastic and metal. It frees sticking parts, silences squeaks and creaks, and leaves a protective film that keeps door seals and trim supple, a handy all-rounder for the garage and the car. What it does Lubricates and protects rubber, plastic and metal Stops squeaks and frees sticking seals and mechanisms Keeps door and window rubbers supple and water-repellent How to use Shake well and spray a thin film onto the clean surface. Wipe off any excess. Specifications Article number: 3310 Content: 300 ml Use on: rubber, plastic and metal parts Genuine Liqui Moly, made in Germany.

Read more less

Octane Booster raises the octane number of petrol and cleans the fuel system in one shot. Higher octane means stronger, more controlled combustion, better throttle response and protection against knocking, useful for performance petrol cars and bikes running on ordinary pump fuel. What it does Increases the octane rating of petrol for better combustion Cleans the fuel system as it works Improves response and protects against knock under load How to use Add to the petrol tank before refuelling. Safe for catalytic converters. Dose as directed on the pack. Specifications Article number: 21616 Content: 200 ml Use in: petrol cars and motorcycles Fitment guidance For petrol engines only. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Octane Plus raises the octane number of petrol for stronger, cleaner combustion and better anti-knock behaviour. A useful top-up for performance petrol engines and for riders or drivers who want to get the most from pump fuel. What it does Increases the octane rating of petrol Improves combustion and reduces knocking and pinking Helps the engine run more smoothly under load How to use Add to the petrol tank before filling. Safe for catalytic converters. Dose as directed on the pack. Specifications Article number: 8351 Content: 150 ml Use in: petrol cars and motorcycles Fitment guidance For petrol engines only. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Motorbike HD 20W-50 Street is a synthetic-technology engine oil for air and oil-cooled 4-stroke twins. The heavier 20W-50 grade and strong detergent package suit classic and cruiser engines run in hot conditions, which makes it a natural fit for Royal Enfield, Harley-Davidson and similar big singles and V-twins. What it does Stable, heavy-duty 20W-50 film for air and oil-cooled engines in high heat Strong detergents keep the engine clean and reduce wear Optimised for wet clutches, with smooth shifting and clean engagement Specifications Article number: 3816 Also written: 20w50, SAE 20W-50 Viscosity: SAE 20W-50 Content: 1 L Meets / suitable for: API SN; JASO MA2 (wet-clutch compatible) Fitment guidance For air or oil-cooled 4-stroke motorcycles specifying a 20W-50 / JASO MA2 oil, including many Royal Enfield and cruiser models. Check the grade and oil quantity in your owner's manual. Tell us your bike and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Motorbike Speed Shooter is a performance fuel additive for 4-stroke motorcycles. One bottle in the tank cleans the fuel system and optimises combustion, sharpening throttle response and helping the engine make the most of every drop of fuel. What it does Cleans the entire fuel system and combustion chamber Optimises combustion for better acceleration and response Helps maintain power and smoothness between services How to use Add the full 80 ml bottle to a tank of petrol. Safe for catalytic converters. Specifications Article number: 7820 Content: 80 ml Use in: 4-stroke petrol motorcycles Fitment guidance For 4-stroke petrol motorcycles. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less

Motorbike MoS2 Shooter adds molybdenum disulfide to your motorcycle engine oil, laying down a low-friction film on wear surfaces for smoother running and added protection. A small 20 ml shot dosed for a single oil fill. What it does Builds a MoS2 sliding film that reduces friction and wear Promotes smoother engine and gearbox operation Adds emergency-running protection under high load How to use Add one 20 ml bottle to the engine oil at an oil change. Specifications Article number: 3444 Content: 20 ml Use in: 4-stroke motorcycle engines Fitment guidance Formulated for motorcycle engines. If your bike runs an oil-bath wet clutch, confirm that an oil additive is permitted for your model before use. Tell us your bike and we will help with fitment guidance. Genuine Liqui Moly, made in Germany.

Read more less

Motorbike 4T Shooter is a one-shot fuel-system additive for 4-stroke motorcycles. Pour one bottle into a tank of petrol and it cleans the injectors or carburettor and combustion chamber, restores smooth fuelling and protects the system against corrosion. An easy, low-cost habit at every few fill-ups, and especially useful with today's ethanol-blended petrol. What it does Removes deposits from the fuel system and combustion chamber Restores crisp throttle response and smooth idling Protects against corrosion, including from ethanol-blended fuel Works with both carburettor and fuel-injection systems How to use Add the full 80 ml bottle to a full tank of petrol. Use regularly for ongoing cleanliness. Safe for catalytic converters. Specifications Article number: 7822 Content: 80 ml Use in: 4-stroke petrol motorcycles Fitment guidance For 4-stroke petrol motorcycles. If unsure, reach out and we will help with guidance. Genuine Liqui Moly, made in Germany.

Read more less