Exhausts & Performance

Iconic British roar. The Silver Stallion BONNE is a slip-on exhaust for the Triumph Bonneville T100 and Bonneville T120. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2.5 BHP and +5 Nm over the stock system while weighing 5 kg. Timeless aesthetics with modern refinement. What changes on the bike +2.5 BHP and +5 Nm over the stock system, measured on the dyno. A lighter can at 5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion BONNE Type Slip-On Exhaust Fits Bonneville T100 and Bonneville T120 Power gain +2.5 BHP over stock Torque gain +5 Nm over stock Weight 5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Bonneville T100, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion BONNE fit?It is made for the Triumph Bonneville T100 and Bonneville T120. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2.5 BHP and +5 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bonneville T100. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Performance-focused sporty style. The Silver Stallion DRIFT is a slip-on exhaust for the Honda CB350 RS. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.8 BHP and +4 Nm over the stock system while weighing 2.2 kg with mid-pipe. Sporty by design. Savage by sound. What changes on the bike +1.8 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 2.2 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion DRIFT Type Slip-On Exhaust Fits CB350 RS Power gain +1.8 BHP over stock Torque gain +4 Nm over stock Weight 2.2 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the CB350 RS, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion DRIFT fit?It is made for the Honda CB350 RS. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.8 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.2 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the CB350 RS. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Honda is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Aerodynamic efficiency. The Silver Stallion BLAZE is a slip-on exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 2.2 kg with mid-pipe. A cylindrical design with a low drag coefficient, better thermal durability and a lighter kerb weight that helps both power-to-weight and mileage. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 2.2 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion BLAZE Type Slip-On Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 2.2 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion BLAZE fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.2 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dyno tuned. Flow for serious riders. The Silver Stallion BLAZE FULL SYSTEM is a full system exhaust for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 6 kg. A full system upgrade with a track-tuned growl. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. Restrictive stock headers and the catalytic section come out, so the engine breathes freely. Better exhaust scavenging, which sharpens throttle response and cuts lag. Complete header plus can package at 6 kg, a large saving over stock. Both oxygen sensor bungs are retained, so the ECU keeps its closed loop fuelling and no error light appears. Specifications Product family Silver Stallion BLAZE FULL SYSTEM Type Full System Exhaust Fits Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 6 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Removing the catalytic section and the restrictive headers gives a harder, track leaning note with a clear top end. It is a significant step up in volume from stock, and it stays clean rather than raspy at part throttle. Is this the right exhaust for you? It suits you if you ride the Speed 400, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you need to keep the catalytic converter, or you want the smallest possible change from stock. A Silver Stallion slip-on is the gentler option. Questions riders ask Which motorcycles does the Silver Stallion BLAZE FULL SYSTEM fit?It is made for the Triumph Speed 400, Scrambler 400 X, Scrambler 400 XC, Thruxton 400 and Speed T4. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this full system exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Do I need a remap or a fuel controller?The system is built to run on the stock map and retains both O2 sensors. A remap is optional and is only worth it if you are chasing the last few percent on a dyno. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Speed 400. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Triumph is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Super Meteor 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Super Meteor 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Super Meteor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Super Meteor 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Shotgun 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Shotgun 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Classic 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Classic 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Classic 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Classic 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Dual purpose style. The Silver Stallion CROSS COUNTRY is a slip-on exhaust for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4 Nm over the stock system while weighing 3.1 kg with mid-pipe. On-road manners with off-road capability and high ground clearance. What changes on the bike +2 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 3.1 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CROSS COUNTRY Type Slip-On Exhaust Fits Himalayan 450 and Guerrilla 450 Power gain +2 BHP over stock Torque gain +4 Nm over stock Weight 3.1 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CROSS COUNTRY fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3.1 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 450. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Himalayan 450 and Guerrilla 450. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Himalayan 450 and Guerrilla 450 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Himalayan 450, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Himalayan 450 and Guerrilla 450. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Slim profile for clearance. The Silver Stallion GLIDE is a slip-on exhaust for the Royal Enfield Himalayan 411, Scram 411 and Scram 440. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4 Nm over the stock system while weighing 2.1 kg with mid-pipe. Designed for trails and tarmac alike. What changes on the bike +2 BHP and +4 Nm over the stock system, measured on the dyno. A lighter can at 2.1 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion GLIDE Type Slip-On Exhaust Fits Himalayan 411, Scram 411 and Scram 440 Power gain +2 BHP over stock Torque gain +4 Nm over stock Weight 2.1 kg with mid-pipe Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Himalayan 411, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion GLIDE fit?It is made for the Royal Enfield Himalayan 411, Scram 411 and Scram 440. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.1 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Himalayan 411. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

High pulling power. The Silver Stallion BIG BORE BEND PIPE is a big bore free flow bend pipe for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds 12% BHP and 7% torque over the stock system while weighing 3.1 kg. Handles the increased exhaust volume of a free-flow can and gives a tuner something to work with. What changes on the bike 12% BHP and 7% torque over the stock system, measured on the dyno. A larger bore that matches the flow of a free-flow can, so the slip-on is no longer choked by a stock diameter pipe. Pairs with a Silver Stallion slip-on to release the full 12 percent figure. Both oxygen sensor bungs are retained for stock ECU behaviour. Gives a tuner real headroom when the bike goes on a dyno. Specifications Product family Silver Stallion BIG BORE BEND PIPE Type Big Bore Free Flow Bend Pipe Fits Interceptor 650 and Continental GT 650 Power gain 12% BHP over stock Torque gain 7% torque over stock Weight 3.1 kg Oxygen sensor Dual O2 sensor compatible, retains both bungs Finishes Silver, Black Matte Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds A bend pipe alone changes tone more than volume. It deepens the note and removes the boxed-in quality of the stock pipe. Most of the volume change comes from the can you pair it with. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you are keeping the stock silencer. The bend pipe is designed to work with a free-flow can and gives back little on its own. Questions riders ask Which motorcycles does the Silver Stallion BIG BORE BEND PIPE fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes 12% BHP and 7% torque over the stock system for this big bore free flow bend pipe, measured on their dyno. How much does it weigh?3.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte. All are priced the same unless the option list says otherwise. Will it throw a check engine light?No. This system keeps both oxygen sensor bungs, so the ECU stays in closed loop and reads the sensors as it did from the factory. Can I fit the bend pipe on its own?It bolts up on its own, but the quoted 12 percent gain assumes it is paired with a free-flow slip-on. On a stock can you will get much less of it. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Plug and play fitment. The Silver Stallion GOAN is a slip-on exhaust for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.7 BHP and +3 Nm over the stock system while weighing 2.5 kg. No mid-pipe required. A cafe racer silhouette with a coastal tune. What changes on the bike +1.7 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion GOAN Type Slip-On Exhaust Fits Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series) Power gain +1.7 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Goan Classic 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion GOAN fit?It is made for the Royal Enfield Goan Classic 350, Classic 350 (J-series), Meteor 350 and Bullet 350 (J-series). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.7 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Goan Classic 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Robust exhaust design. The Silver Stallion STURDY is a slip-on exhaust for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 3 kg. Uniform smooth gas flow, low droning, no sharp edges and a deeper tone. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 3 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion STURDY Type Slip-On Exhaust Fits Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE) Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 3 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (UCE), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion STURDY fit?It is made for the Royal Enfield Classic 350 (UCE), Classic 500, Thunderbird 350 and Bullet (UCE). Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (UCE). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Aerodynamic efficiency. The Silver Stallion OUTLANDER is a slip-on exhaust for the Royal Enfield Bear 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2.5 BHP and +4.9 Nm over the stock system while weighing 3.5 kg with mid-pipe. A cylindrical body with low drag and high thermal durability. What changes on the bike +2.5 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 3.5 kg with mid-pipe, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion OUTLANDER Type Slip-On Exhaust Fits Bear 650 Power gain +2.5 BHP over stock Torque gain +4.9 Nm over stock Weight 3.5 kg with mid-pipe Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Bear 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion OUTLANDER fit?It is made for the Royal Enfield Bear 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2.5 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?3.5 kg with mid-pipe, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Bear 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Performance balance. The Silver Stallion SPORTY is a slip-on exhaust for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.5 BHP and +3 Nm over the stock system while weighing 2.5 kg. Excellent power delivery and throttle response, especially at lower RPM. What changes on the bike +1.5 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SPORTY Type Slip-On Exhaust Fits Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350 Power gain +1.5 BHP over stock Torque gain +3 Nm over stock Weight 2.5 kg Finishes Silver, Black Matte, Brushed Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 350 (J-series), you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SPORTY fit?It is made for the Royal Enfield Classic 350 (J-series), Meteor 350, Bullet 350 (J-series) and Goan Classic 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.5 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 350 (J-series). No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Sustained Acoustic Performance. The Silver Stallion LONGSHOT is a slip-on exhaust for the Royal Enfield Super Meteor 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 6 kg. No power loss, degradation or deformity, with even heat dissipation. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion LONGSHOT Type Slip-On Exhaust Fits Super Meteor 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Super Meteor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion LONGSHOT fit?It is made for the Royal Enfield Super Meteor 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Super Meteor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Custom look, classic style. The Silver Stallion ROADKING is a slip-on exhaust for the Royal Enfield Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +3.5 Nm over the stock system while weighing 6 kg. More power at higher RPM, a throatier note and better heat dispersion. What changes on the bike +2 BHP and +3.5 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion ROADKING Type Slip-On Exhaust Fits Shotgun 650 Power gain +2 BHP over stock Torque gain +3.5 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Shotgun 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion ROADKING fit?It is made for the Royal Enfield Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +3.5 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Shotgun 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Shorty design. The Silver Stallion SHORTY is a slip-on exhaust for the Royal Enfield Hunter 350. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +1.75 BHP and +3 Nm over the stock system while weighing 2.1 kg. The internals of a full sized exhaust: large core, direct air flow, low back pressure. What changes on the bike +1.75 BHP and +3 Nm over the stock system, measured on the dyno. A lighter can at 2.1 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion SHORTY Type Slip-On Exhaust Fits Hunter 350 Power gain +1.75 BHP over stock Torque gain +3 Nm over stock Weight 2.1 kg Finishes Silver, Black Matte, Brushed, Dual Tone Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Hunter 350, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion SHORTY fit?It is made for the Royal Enfield Hunter 350. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +1.75 BHP and +3 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?2.1 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed, Dual Tone. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Hunter 350. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Cruiser Vibe. The Silver Stallion CRUISER is a slip-on exhaust for the Royal Enfield Classic 650, Super Meteor 650 and Shotgun 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 6 kg. Tuned for cruising, with a deep bassy note. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 6 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion CRUISER Type Slip-On Exhaust Fits Classic 650, Super Meteor 650 and Shotgun 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 6 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Classic 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion CRUISER fit?It is made for the Royal Enfield Classic 650, Super Meteor 650 and Shotgun 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?6 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Classic 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

Built for the Twin. Tuned for the Win. The Silver Stallion TWINS is a slip-on exhaust for the Royal Enfield Interceptor 650 and Continental GT 650. It is designed, developed and dyno tested by Silver Stallion Performance Pvt Ltd, also known as SSP, in Coimbatore, Tamil Nadu, and it adds +2 BHP and +4.9 Nm over the stock system while weighing 5 kg. Class leading at 5 kg, a bassy note, and ECU compatible. What changes on the bike +2 BHP and +4.9 Nm over the stock system, measured on the dyno. A lighter can at 5 kg, which helps the power to weight ratio. A deeper exhaust note without the drone of a straight-through pipe. Bolt-on fitment that reuses the stock mounting points. Specifications Product family Silver Stallion TWINS Type Slip-On Exhaust Fits Interceptor 650 and Continental GT 650 Power gain +2 BHP over stock Torque gain +4.9 Nm over stock Weight 5 kg Finishes Silver, Black Matte, Brushed Heat management LRT low radiant temperature blanket Material Stainless steel Manufacturer Silver Stallion Performance Pvt Ltd (SSP) Country of origin India How it is built Silver Stallion builds to a four stage process it calls the 4Ds: Design for airflow and shape, Detail in the welds and finish, Development for fit and durability, and Dyno to prove the numbers rather than claim them. Bodies are stainless steel, and every system is signed off on a dyno before it goes on sale. LRT heat blanket This system carries Silver Stallion's LRT wrap: an Italian stitched blanket wrapped in Mylar coated pre-laminated aluminium. It holds a low radiant temperature, resists water, and is built so there is no loss of wool and no change in sound as the wrap ages. Silver Stallion lists it as the only treatment of its kind offered in India. How it sounds Deeper and fuller than stock, with the low frequency weight riders look for and without the constant drone of a straight-through pipe at highway speed. Is this the right exhaust for you? It suits you if you ride the Interceptor 650, you want a real weight saving and a deeper note, and you would rather have a dyno figure behind the claim than a louder pipe alone. Look elsewhere if you want the full header-back gain. The Silver Stallion full system goes further, at a higher price and a bigger install. Questions riders ask Which motorcycles does the Silver Stallion TWINS fit?It is made for the Royal Enfield Interceptor 650 and Continental GT 650. Send us your model and year before you order and we will help confirm the right part. How much power does it actually add?Silver Stallion quotes +2 BHP and +4.9 Nm over the stock system for this slip-on exhaust, measured on their dyno. How much does it weigh?5 kg, against a noticeably heavier stock unit. What finishes can I choose?Silver, Black Matte, Brushed. All are priced the same unless the option list says otherwise. Is it a bolt-on job or does it need fabrication?It is a bolt-on fit using the stock mounting points on the Interceptor 650. No cutting or welding is needed. Is this road legal in India?It is an aftermarket performance part. Indian rules require a silencer that meets the noise limit your bike was homologated to, and enforcement varies by state. Check your local position before you fit it. What does SSP stand for, and is it the same as Silver Stallion?Silver Stallion Performance Pvt Ltd, based in Coimbatore, Tamil Nadu. The company is commonly abbreviated to SSP, and some dealers list the same parts under SS Motocorp. The range is designed, developed and dyno tested in India. What warranty and support do I get?Manufacturer warranty against manufacturing defects, handled through Rawtorque. Message us on WhatsApp for fitment help before or after you buy. Fitment help Fitment listed here follows the Silver Stallion dealer catalogue. If your Royal Enfield is a variant or a model year we have not listed, send us the registration year and a photo of the current exhaust mount and we will help you work out the right part before you order.

Read more less

The Rogue V1 Slip-On Muffler (Universal Fitment) is the original Rogue canister, a compact slip-on that lifts the note without shouting over the engine.Read this before ordering. This is the muffler body on its own. It is not a bike-specific kit. Fitment depends entirely on the link pipe you pair it with, and the correct link pipe varies by model and model year. Message us with your bike and year before you order and we will tell you what else you need.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Supplied with mounting clamps Silicone damping belt to cut vibration at the mount Covered by Barrel's warranty Fitment guidanceUniversal muffler body. Tell us your motorcycle and year and we will confirm which link pipe suits it before you buy.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Storm Exhaust for Triumph Tiger 900 GT (2025) is Barrel's touring line, a slip-on sized for big adventure machines, where heat management matters as much as tone. This version is made for the Triumph Tiger 900 GT (2025).As a slip-on it keeps the factory headers and catalytic section, so the character stays recognisably your bike's, just with more depth behind it. It is the reversible option: keep the stock can on a shelf and the bike goes back in an afternoon.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Tiger 900 GT (2025). Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Triumph Street Triple 765 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Street Triple 765.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Fitment guidanceListed by Barrel for the Triumph Street Triple 765. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less

The Outlaw 2.0 Full System Exhaust for Triumph Trident 660, Tiger Sport 660 and Daytona 660 is the current Outlaw, a 72mm chamber aimed squarely at inline-three and inline-four engines. This version is made for the Triumph Trident 660, Tiger Sport 660 and Daytona 660.Being a full system, it replaces the headers as well as the canister. That is the biggest change available: the deepest note, the largest weight saving, and the cleanest gas flow from port to tip. It is also the most involved to fit.Build Stainless steel 304 throughout, so it will not rust through a monsoon Removable DB killer, so you choose the volume Covered by Barrel's warranty Fitment guidanceListed by Barrel for the Triumph Trident 660, Tiger Sport 660 and Daytona 660. Model years and regional variants do differ, so if you are unsure, send us your registration year and a photo of your current exhaust and we will help you check before you order.Good to know An aftermarket exhaust is louder than stock. Check what your local rules allow. Free-flow systems can change fuelling. On some bikes a remap gets the most out of the change. We are an authorized Barrel dealer. Every unit is genuine, supplied direct by Barrel.

Read more less