Products

The NGK Iridium IX twin-spark kit — BPR5EIX + CPR6EAIX-9S — is the complete iridium ignition set for Royal Enfield's UCE twin-spark 350 engine. These motors run two plugs per cylinder (a main and an auxiliary), and this kit gives you both in one box, matched to NGK's recommended iridium spec. Both plugs use a 0.6mm fine-wire iridium centre electrode for a sharper, more focused spark than standard copper plugs. On the twin-spark UCE motor that translates to cleaner combustion, smoother idle, and more reliable cold starts — and because iridium holds its gap far longer, you get consistent ignition service after service. This is a direct-fit OEM-spec set. It doesn't alter your tune or compression — it restores and maintains the ignition the way the engine was built to run. Fitment (NGK-confirmed — UCE Twin-Spark 350) Royal Enfield Thunderbird 350 / 350X (ABS Dual Channel) Royal Enfield Classic 350 (UCE / BS3 & BS4) Royal Enfield Bullet (Trials) Royal Enfield Electra 350 BS3 (2015) This kit is for the UCE twin-spark 350 (BS3/BS4) which uses two plugs. Riding a newer BS6 J-series Classic 350 or Bullet 350? That engine uses a single BPR5EIX — order our single-plug listing instead. Not sure which engine you have? Message us on WhatsApp. Specifications Brand: NGK Part Numbers: BPR5EIX + CPR6EAIX-9S Type: Iridium IX Spark Plug Kit (2 plugs) Centre Electrode: Iridium, 0.6mm fine-wire Application: Royal Enfield UCE twin-spark 350 (BS3/BS4) ignition Sold as: 2-plug set (one BPR5EIX + one CPR6EAIX-9S) Key Features Complete twin-spark iridium set — both plugs the UCE 350 needs NGK-recommended iridium fitment for the UCE twin-spark 350 Fine-wire iridium electrodes for a sharper, more focused spark Smoother idle and better cold starts versus standard plugs Long service life — iridium holds its gap between changes

Read more less

NGK Iridium IX LKAR8AI-9 Spark Plug – OEM-Spec Centre Plug for KTM & Bajaj (BS4 & BS6) The NGK Iridium IX LKAR8AI-9 spark plug is an OEM-spec ignition component designed for select KTM and Bajaj petrol engines where the LKAR8AI-9 spark plug specification is recommended. Manufactured by NGK to its Iridium IX construction standards, this spark plug is intended to provide consistent ignition performance and stable combustion when installed in compatible engines under normal operating conditions. Spark plugs play a critical role in petrol engines by igniting the air–fuel mixture inside the combustion chamber. Correct ignition timing and spark stability are essential for controlled combustion, dependable starting, and predictable engine operation. The LKAR8AI-9 is engineered to meet these requirements when used in engines that specify this exact plug code. Iridium IX Spark Plug Construction The LKAR8AI-9 features a 0.6 mm fine-wire iridium centre electrode, laser-welded to improve electrode durability under repeated heat cycles. Iridium is selected for spark plug electrodes due to its high melting point and resistance to electrode erosion when compared to conventional nickel-alloy materials. This spark plug also incorporates NGK’s ceramic insulator and resistor design, which are intended to support electrical insulation, suppress electromagnetic interference, and manage heat dissipation during engine operation. The plated metal shell is designed to resist corrosion and support durability during routine installation and removal. The LKAR8AI-9 is manufactured as a like-for-like replacement component. It does not alter engine tuning, ignition timing, compression ratio, or fuel delivery characteristics. Intended Application & Compatibility The NGK LKAR8AI-9 spark plug is specified for select KTM and Bajaj motorcycle engines only where this exact plug code is listed in official service or maintenance documentation. KTM – Direct Replacement Applications (BS4 & BS6) Duke 125 Duke 200 Duke 250 Duke 390 RC 125 RC 200 RC 390 Adventure 250 Adventure 390 (Gen 1 and BS6) Bajaj – Centre Spark Plug (Triple-Spark Engines) Dominar 250 – Centre plug Dominar 400 – Centre plug Pulsar NS400Z – Centre plug Pulsar NS200 – Centre plug Pulsar RS200 – Centre plug Pulsar AS200 – Centre plug Compatibility applies only where LKAR8AI-9 is the specified spark plug code. Engines using a different spark plug specification should not use this model, even if displacement or engine platform appears similar. Important Note for Triple-Spark Engines Certain Bajaj engines use a three-spark-plug cylinder head configuration. In these engines: 1 × LKAR8AI-9 is used as the centre spark plug 2 × CPR8EAIX-9 are used as the side spark plugs This product listing is only for the centre spark plug (LKAR8AI-9). Buyers should confirm the correct quantity and plug positions before purchase. Specification-Based Use Spark plug codes define critical parameters including: Thread size and reach Heat range Electrode configuration Terminal type Using the correct spark plug specification ensures proper fitment and correct thermal behaviour within the combustion chamber. Installing an incorrect spark plug may result in improper combustion or long-term engine issues. The LKAR8AI-9 is not intended as a universal performance upgrade. It is designed strictly to meet the specification requirements of engines that call for this exact plug code. Replacement & Service Considerations Spark plugs are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals. While iridium spark plugs are generally designed for improved durability compared to conventional nickel plugs, actual replacement timing depends on riding conditions, fuel quality, engine condition, and maintenance practices. The NGK LKAR8AI-9 is supplied as a single spark plug. Buyers should confirm the number of spark plugs required for their specific engine configuration before purchase. Installation should follow standard service procedures, including correct tightening torque and clean thread conditions. Summary The NGK Iridium IX LKAR8AI-9 spark plug is an OEM-spec ignition component intended for select KTM and Bajaj motorcycles where this spark plug specification is recommended. Built with a fine-wire iridium centre electrode and NGK’s proven construction standards, it is designed to support stable ignition and reliable combustion when used as a direct replacement in compatible engines. Correct compatibility verification and proper installation are essential before use.

Read more less

NGK Iridium Spark Plug Kit for Bajaj Dominar 400 – Triple Spark OEM-Spec Replacement Set The NGK Iridium Spark Plug Kit for Bajaj Dominar 400 is a specification-based ignition service kit designed for Dominar 400 engines equipped with a triple-spark cylinder head, where the factory-recommended spark plug combination is required. Bajaj Dominar 400 engines use three spark plugs per cylinder — one centre spark plug and two side spark plugs — each with a specific plug code and design. This kit groups the correct NGK spark plugs into a single package to simplify replacement and ensure correct specification matching across all three plug positions. This kit is intended strictly as a like-for-like replacement set, not as a modification or tuning upgrade. Kit Contents & Spark Plug Positions The kit includes the following NGK spark plugs: 1 × NGK LKAR8AI-9Centre spark plug position 2 × NGK CPR8EAIX-9Left and right side spark plug positions Each spark plug in this kit serves a specific role within the Dominar 400’s triple-spark head and should be installed only in its designated position. Spark Plug Construction Overview NGK LKAR8AI-9 (Centre Plug) The LKAR8AI-9 features a fine-wire iridium centre electrode, laser-welded for durability under confirmed heat cycles. Iridium is used due to its high melting point and resistance to electrode wear compared to conventional nickel-alloy materials. This plug is specified by the manufacturer for the centre position in the Dominar 400’s triple-spark configuration and is designed to operate within the thermal range required for that position. NGK CPR8EAIX-9 (Side Plugs) The CPR8EAIX-9 spark plugs use NGK’s Iridium IX construction, incorporating a fine-wire iridium centre electrode paired with a conventional ground electrode design. These plugs are specified for the left and right side positions of the Dominar 400 cylinder head. They are engineered to maintain consistent spark characteristics when used as specified, without altering engine tuning or ignition mapping. Why a Matched Triple-Spark Kit Matters In triple-spark engines, each spark plug position is designed with a specific heat range, reach, and electrode configuration. Mixing incorrect plug types or using mismatched specifications can result in improper ignition behaviour or uneven combustion. This kit ensures: Correct spark plug code for each position Proper fitment across all three plug locations Simplified replacement without cross-referencing multiple listings It does not change engine output, ignition timing, compression, or fuel delivery. Intended Application & Compatibility This NGK spark plug kit is intended for: Bajaj Dominar 400 BS3 BS4 BS6 Compatibility applies only to Dominar 400 engines that use the factory triple-spark configuration and specify LKAR8AI-9 and CPR8EAIX-9 spark plug codes. It is not suitable for Dominar 250 or other Bajaj engines with different spark plug specifications. Replacement & Service Considerations Spark plugs are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals. While iridium spark plugs are generally designed for improved durability compared to conventional plugs, actual replacement intervals depend on riding conditions, fuel quality, engine condition, and maintenance practices. Installation should follow standard service procedures: Install each plug only in its specified position Use correct tightening torque Ensure clean threads and proper seating Incorrect installation or plug placement may affect ignition behaviour or cause component damage. Summary The NGK Iridium Spark Plug Kit for Bajaj Dominar 400 is a specification-correct replacement set designed for triple-spark Dominar 400 engines. By bundling the required centre and side spark plugs into one kit, it simplifies maintenance while ensuring correct ignition component matching across all three spark plug positions. This kit is intended strictly for engines that specify these NGK plug codes and should be installed according to manufacturer service guidelines.Buyers are advised to verify spark plug specifications using the motorcycle manufacturer’s service manual before installation. Using the correct plug code and means correct fitment, heat range compliance, and reliable ignition system operation.

Read more less

The NGK IZFR6K-11 Iridium spark plug is the iridium fitment for several Honda petrol models including the Accord, CR-V and Civic. It's the NGK-recommended iridium plug for these engines, a direct OEM-spec replacement. The fine-wire iridium centre electrode fires a tighter, more focused spark than copper, delivering smoother idle, cleaner combustion, and better cold starts. Iridium holds its gap far longer than a standard plug, keeping ignition consistent and stretching out service intervals. Direct-fit, OEM-spec replacement. No tuning changes — just a sharper, longer-lasting spark. Fitment (NGK-confirmed) Honda: Accord 2.4i/3.0i (from Aug'2003), CR-V, Civic 1.6/1.8i/2.0i (per IZFR6K-11/IZFR6K-11S) Honda runs several close IZFR6K variants across model years (IZFR6K-11, -11S, -13). Confirm your exact OEM plug code before ordering — message us on WhatsApp with your model, variant and year. Specifications Brand: NGK Part Number: IZFR6K-11 Type: Iridium Spark Plug Centre Electrode: Iridium fine-wire Sold as: Single plug Key Features NGK-recommended iridium fitment for Honda Accord / CR-V / Civic Smoother idle and better cold starts versus a standard plug Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

The NGK IZFR6K-13 Iridium spark plug is the iridium fitment for the Honda City (Oct 2008 to Sep 2014) and Jazz 1.2 MT. It's the NGK-recommended iridium plug for these engines, a direct OEM-spec replacement. The fine-wire iridium centre electrode fires a tighter, more focused spark than copper, delivering smoother idle, cleaner combustion, and better cold starts. Iridium holds its gap far longer than a standard plug, keeping ignition consistent and stretching out service intervals. Direct-fit, OEM-spec replacement. No tuning changes — just a sharper, longer-lasting spark. Fitment (NGK-confirmed) Honda: City (Oct 2008 to Sep 2014), Jazz 1.2 MT Note: the "-13" denotes a 1.3mm pre-set gap — different from the IZFR6K-11. Confirm your exact OEM plug code before ordering. Message us on WhatsApp with your variant and year. Specifications Brand: NGK Part Number: IZFR6K-13 Type: Iridium Spark Plug Centre Electrode: Iridium fine-wire Gap: 1.3mm pre-set Sold as: Single plug Key Features NGK-recommended iridium fitment for Honda City (2008-2014) & Jazz 1.2 MT Pre-set 1.3mm gap — straight out of the box Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

The NGK LFR6AIX-11 Iridium IX spark plug is the iridium fitment for the Toyota Innova — India's workhorse MPV. It's the NGK-recommended iridium plug for the petrol Innova, a direct OEM-spec replacement. The 0.6mm fine-wire iridium centre electrode fires a tighter, more focused spark than copper, delivering smoother idle, cleaner combustion, and better cold starts. Iridium holds its gap far longer than a standard plug, keeping ignition consistent and stretching out service intervals — ideal for a vehicle that clocks serious miles. Direct-fit, OEM-spec replacement. No tuning changes — just a sharper, longer-lasting spark. Fitment (NGK-confirmed) Toyota: Innova (petrol) Note: the "-11" denotes a 1.1mm pre-set gap. Confirm your exact OEM plug code before ordering. Message us on WhatsApp with your variant and year. Specifications Brand: NGK Part Number: LFR6AIX-11 Type: Iridium IX Spark Plug Centre Electrode: Iridium, 0.6mm fine-wire Gap: 1.1mm pre-set Sold as: Single plug Key Features NGK-recommended iridium fitment for the petrol Toyota Innova Pre-set 1.1mm gap — straight out of the box Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

NGK LKR7BIX Iridium Spark Plug – OEM Replacement for Hyundai 1.2L Kappa & Tata 1.2L Revotron Engines The NGK LKR7BIX Iridium Spark Plug is an OEM-spec ignition component designed for select 1.2-litre petrol engines used across Hyundai and Tata passenger vehicles, where the LKR7BIX spark plug specification is recommended. Manufactured to NGK’s established iridium spark plug standards, this model is intended to provide consistent ignition performance and reliable combustion under normal driving conditions. Spark plugs play a critical role in petrol engines by igniting the air-fuel mixture inside the combustion chamber. A stable and consistent spark helps ensure smooth engine operation, dependable starting, and controlled combustion. The NGK LKR7BIX is built to meet these requirements when installed in engines that specify this exact plug code. Iridium Spark Plug Construction Iridium spark plugs use a fine-wire iridium centre electrode, a material selected by NGK for its high melting point and resistance to electrode wear. Compared to conventional copper spark plugs, iridium electrodes maintain their shape and spark characteristics over longer operating periods. This helps the spark plug continue to perform consistently across repeated heat cycles and extended use. The fine-wire electrode design allows the spark to form more precisely at the tip of the electrode. This contributes to stable ignition without requiring changes to engine tuning or fuel delivery. The NGK LKR7BIX is designed as a like-for-like replacement component, not as a modification that alters engine behaviour. In addition to the iridium centre electrode, the spark plug features NGK’s ceramic insulator and plated metal shell. These components are designed to support electrical insulation, manage heat dissipation, and provide durability during routine installation and removal. Intended Application The LKR7BIX spark plug is commonly specified for Hyundai Kappa 1.2L (2nd generation) petrol engines and Tata 1.2L Revotron petrol engines. It functions as a direct replacement only when the vehicle manufacturer or service documentation specifies LKR7BIX or LKR7BIX-P. This spark plug does not change engine mapping, compression, or output. Its purpose is to maintain proper ignition performance and combustion stability in engines designed for this specification. Engine Compatibility / Application Hyundai – Kappa Engine (2nd Generation), 1.2L Petrol Grand i10 Xcent i20 (Sportz & Active) i20 Elite Aura 1.2L (Jan 2020 – Jan 2023) Grand i10 Nios 1.2L (Aug 2019 – Jan 2023) Tata – 1.2L Revotron Petrol Engine Zest Bolt Tiago 1.2L Tigor 1.2L Altroz 1.2L Revotron (from Feb 2020) Punch 1.2L Compatibility applies only where LKR7BIX is the specified spark plug code. Vehicles using different spark plug specifications should not use this model. Replacement & Use Considerations Spark plugs are service components and should be replaced according to the vehicle manufacturer’s recommended service intervals. While iridium spark plugs are designed for longer service life compared to conventional plugs, actual replacement timing depends on engine condition, driving environment, fuel quality, and maintenance practices. The NGK LKR7BIX is supplied as a single spark plug. Vehicles may require multiple spark plugs depending on engine design. Buyers should confirm the quantity required for their specific engine before purchase.This listing price is for one spark plug only. Installation should be carried out following standard service procedures, including correct tightening torque and clean thread conditions. Improper installation may affect performance or cause damage. Summary The NGK LKR7BIX Iridium Spark Plug is a high-quality, OEM-spec ignition component intended for select 1.2-litre petrol engines used by Hyundai and Tata. Built with an iridium fine-wire centre electrode and NGK’s proven construction standards, it is designed to provide stable ignition and reliable combustion when used in engines that specify the LKR7BIX code. As with all ignition components, correct application and compatibility verification are essential before installation. OEM Specification & Service Context The NGK LKR7BIX iridium spark plug is manufactured to meet OEM replacement requirements where this specific plug code is specified by the vehicle manufacturer. NGK assigns spark plug codes based on critical parameters such as thread size, reach, heat range, terminal type, and electrode configuration. Using the correct spark plug code is essential to ensure proper fitment and correct thermal behaviour inside the combustion chamber. The LKR7BIX designation identifies this spark plug as part of NGK’s iridium series, intended for engines designed to operate within the corresponding heat range and ignition characteristics. Substituting spark plugs with a different code, even if visually similar, may result in improper combustion behaviour or long-term engine issues. For this reason, the NGK LKR7BIX should only be installed in engines where this exact specification is recommended. This spark plug is not intended as a universal upgrade. It is a direct, like-for-like replacement for engines that specify LKR7BIX or LKR7BIX-P in official service documentation.

Read more less

The NGK SIMR8A9 Iridium IX spark plug is the iridium fitment for Honda's quarter-litre singles — the CBR250R and Rebel 300. It's the NGK-recommended iridium plug for these engines, a direct replacement for the OEM unit. The 0.6mm fine-wire iridium centre electrode fires a tighter, more focused spark than copper, giving you crisp throttle response, smooth running through the rev range, and reliable starts. Iridium holds its gap far longer, so the spark stays consistent and service intervals stretch out. Direct-fit, OEM-spec replacement. No tuning changes — just a sharper, longer-lasting spark. Fitment (NGK-confirmed) Honda: CBR250R, Rebel 300 Not sure if SIMR8A9 is your plug? Message us on WhatsApp with your bike and year — we'll confirm before you order. Specifications Brand: NGK Part Number: SIMR8A9 Type: Iridium IX Spark Plug Centre Electrode: Iridium, 0.6mm fine-wire Sold as: Single plug Key Features NGK-recommended iridium fitment for Honda CBR250R / Rebel 300 Sharper spark, crisp throttle response Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

The Interceptor 650's twin exhaust gets a proper upgrade — Norifumi GTX slip-on, built for the parallel twin. The Norifumi GTX is a slip-on exhaust for the Royal Enfield Interceptor 650, designed to suit the character of the parallel twin — deeper, more defined exhaust note with a weight reduction over the heavy OEM canister. The GTX design is Norifumi's boulevard-sport spec: a clean stainless steel canister profile that complements the Interceptor's retro-modern aesthetic while delivering better exhaust flow. What's in the box: GTX canister (stainless steel) Stainless steel link pipe All fitment hardware Why Norifumi GTX: 650cc parallel twin tuned: Exhaust character matched to the Interceptor's engine note Weight reduction: Lighter than the OEM canister assembly Better flow: Freer-breathing exhaust vs. stock restrictive muffler Stainless steel: Long-term durability and resistance to heat cycling Genuine Norifumi: Authorised distributor stock, MRP inclusive of 18% GST Compatible Bike: Royal Enfield Interceptor 650 (all years) Note: This is a single canister slip-on. The Interceptor 650 runs twin exhausts — one unit per side. Sold per piece.

Read more less

The XPulse 210's most aggressive exhaust option — Norifumi's top-spec Kompetisi canister, full system. The Norifumi Rocket4 Kompetisi is the top-of-range full exhaust for the Hero XPulse 210. The Kompetisi spec runs a larger, competition-tuned canister compared to the Boreup variant — delivering a more aggressive exhaust note and greater power potential at the top end. Built in stainless steel for off-road durability. DB Killer included for road compliance. What's in the box: Full exhaust system — headers + midpipe + canister Rocket4 Kompetisi canister (stainless steel) DB Killer (removable) All fitment hardware Why Norifumi Rocket4 Kompetisi: Competition spec: Larger, more aggressive canister vs. Boreup — more top-end output Full system weight reduction: Noticeably lighter than OEM exhaust assembly Dual-sport ready: DB Killer included — compliant for road, removable for trail Stainless steel construction: Long-term durability in off-road conditions Genuine Norifumi: Authorised distributor stock, MRP inclusive of 18% GST Compatible Bike: Hero XPulse 210 (2024 onwards) For the more road-biased Boreup option, see EXH21059.

Read more less

All the Whoops SS — with a carbon fibre end cap. Same Himalayan-ready build, sharper finish. The Norifumi Whoops SS Carbon is the carbon end-cap variant of the Himalayan 450 Whoops slip-on — stainless steel canister body with a carbon fibre exit cap for a premium visual finish. Available in Short and Long configurations. Everything else is identical to the Whoops SS: stainless steel link pipe, complete fitment hardware, and Norifumi's characteristic adventure-tuned sound profile. The Short version sits tighter to the bike — better for luggage and pannier setups. The Long version has a more commanding canister profile and deeper note. What's in the box: Whoops SS Carbon canister (stainless body + carbon fibre end cap) Stainless steel link pipe All fitment hardware (brackets, clamps, heat shield) Why Norifumi Whoops SS Carbon: Carbon end cap: Premium finish over the standard Whoops SS — same performance, better aesthetics Weight reduction: Lighter than OEM canister and mid-section assembly Better flow: Improved exhaust scavenging vs. stock Stainless + carbon build: Durable in the conditions the Himalayan rides in Genuine Norifumi: Authorised distributor stock, MRP inclusive of 18% GST Compatible Bike: Royal Enfield Himalayan 450 (2024 onwards) For the standard stainless finish without carbon cap, see EXH18155 (Short) and EXH18157 (Long).

Read more less

The Himalayan 450's OEM exhaust was always the weakest link. The Norifumi Whoops SS fixes that. The Norifumi Whoops SS is a stainless steel slip-on exhaust for the Royal Enfield Himalayan 450 — available in Short and Long configurations. The Whoops canister is Norifumi's benchmark adventure exhaust: purpose-built for bikes that go off the road, with stainless steel construction, a bolt-on link pipe, and a sound profile that suits the Himalayan's character without being intrusive. The Short version offers a cleaner, tucked fitment with slightly less visual presence — ideal for rack-and-luggage setups. The Long version delivers a more substantial canister with additional sound and character. What's in the box: Whoops SS canister (stainless steel) Stainless steel link pipe All fitment hardware (brackets, clamps, heat shield) Why Norifumi Whoops SS: Weight reduction: Meaningfully lighter than the OEM canister and mid-section Better flow: Improved exhaust scavenging — sharper throttle response Adventure-ready construction: Stainless steel — built for the conditions the Himalayan is designed for Two length options: Short for luggage-carry setups, Long for maximum presence Genuine Norifumi: Authorised distributor stock, MRP inclusive of 18% GST Compatible Bike: Royal Enfield Himalayan 450 (2024 onwards) For the Carbon fibre end-cap version, see EXH18156 (Short) and EXH18158 (Long).

Read more less

OEM-Style Centre Armrest for VW Polo (ABS, Sliding)Add comfort and a factory look to your Polo with this OEM-style sliding centre armrest. Made in India from durable ABS with a grey finish and a precise, model-specific fit.Compatible Vehicle(s)Volkswagen PoloSpecifications Type: Centre Console Armrest (sliding) Material: ABS Colour: Grey Country of Origin: Made in India Sold per Piece. Unbranded / universal-market aftermarket product. Easy DIY fit.

Read more less

Upgrade the exhaust flow and performance character of your Royal Enfield Himalayan 411 with the Powerage Performance Headers engineered for riders looking for stronger throttle response, improved exhaust acoustics, reduced weight, and enhanced touring performance. Manufactured from premium-grade stainless steel, these performance headers are dyno-tested and specifically developed to improve exhaust gas flow efficiency while maintaining compatibility with the stock exhaust layout and aftermarket slip-ons. The big-bore free-flow design helps unlock improved horsepower and torque delivery while giving the Himalayan a deeper and more resonant exhaust note. Built using precision hand-crafted construction, the headers maintain an OE-style routing while significantly improving overall motorcycle aesthetics and exhaust breathing capability. The integrated O2 sensor provision ensures compatibility with factory sensor setup for seamless installation. Key Features Designed specifically for Royal Enfield Himalayan 411 Big bore free-flow header design Improved horsepower and torque delivery Deeper resonant exhaust note Dyno-tested performance setup Hand-crafted stainless steel construction OE-style routing and fitment Integrated O2 sensor provision Significant weight reduction over stock setup Compatible with stock and aftermarket exhausts Improved exhaust gas flow efficiency Performance Benefits Faster throttle response Improved low and mid-range torque feel Better exhaust breathing Reduced exhaust restriction Deeper and more aggressive exhaust note Cleaner and premium visual appearance Reduced overall motorcycle weight Enhanced touring and highway ride feel Construction & Design The Powerage Performance Header uses a precision-formed big-bore stainless steel pipe layout engineered for smoother exhaust scavenging and freer exhaust flow. Its brushed steel finish delivers a clean premium appearance while offering strong corrosion resistance and long-term durability for adventure touring conditions. The system is designed to retain factory sensor compatibility while improving overall exhaust efficiency. Package Contents 1 x Powerage Performance Header Pipe Mounting Hardware Clamps & Fasteners Important Note Compatible only with Royal Enfield Himalayan 411. Professional installation recommended. Exhaust sound characteristics may vary depending on muffler setup. ECU tuning is not mandatory but may further optimize performance with aftermarket exhaust systems.

Read more less

Unlock the Guerrilla 450’s true character with the Powerage Slip-On Exhaust with De-Cat Pipe for Royal Enfield Guerrilla 450 — a performance-focused system designed to improve throttle response, mid-range torque, and exhaust tone without compromising everyday usability. This isn’t just a louder muffler. It’s a carefully engineered slip-on and de-cat combination that allows the Royal Enfield Guerrilla 450 to breathe more freely. By reducing exhaust restriction and optimizing gas flow, the system sharpens throttle pickup and makes the single-cylinder engine feel more responsive across the rev range. Engineered for Better Flow The included model-specific de-cat pipe replaces the restrictive catalytic section, improving exhaust scavenging and reducing excess heat build-up near the engine. With smoother flow characteristics, the Guerrilla 450 responds quicker when you roll on the throttle. The freer breathing setup enhances mid-range pull — the rpm band where riders spend most of their time. Whether you’re navigating city traffic or accelerating out of highway bends, the improvement feels clean and progressive rather than abrupt. Slip-On Design – Direct Bolt-On Fit The Powerage Slip-On Exhaust for Royal Enfield Guerrilla 450 is designed as a direct replacement for the stock muffler assembly. No cutting. No welding. No fabrication. Installation remains straightforward: Remove the factory exhaustInstall the Powerage slip-onFit the supplied de-cat pipeSecure with provided mounting hardware No ECU remap is required for installation. The system is engineered to work within stock fueling tolerances under standard riding conditions. Stainless Steel Construction Both the slip-on unit and the de-cat pipe are manufactured using high-grade stainless steel. This ensures strength, corrosion resistance, and improved heat durability for long-term use. Stainless steel also provides structural integrity without unnecessary bulk. Compared to the stock exhaust, this setup reduces overall exhaust mass, contributing to a slightly lighter rear profile and more agile handling feel. Approximate weights: Slip-On Exhaust: ~2 kgDe-Cat Pipe: ~1 kg This weight reduction improves balance while maintaining durability for daily riding and touring applications. Sound Profile – Deep, Clean, Controlled The Powerage Slip-On Exhaust for Guerrilla 450 delivers a deeper, more pronounced exhaust note compared to the stock muffler. The tone is fuller and more muscular, complementing the character of the 450cc single-cylinder engine. The sound profile remains controlled rather than harsh. It enhances presence without turning the motorcycle into an overly loud setup. Ideal for riders who want a noticeable upgrade in tone without compromising ride comfort. Performance Character With the de-cat pipe improving flow and the slip-on reducing back-pressure, riders can expect: • Cleaner throttle pickup• Sharper mid-range response• Improved engine breathing• Reduced exhaust heat concentration• A more engaging riding feel This system does not claim peak horsepower figures or dyno numbers. Instead, it focuses on real-world rideability improvements that are noticeable in everyday riding scenarios. Built for Everyday Use The Powerage Slip-On + De-Cat System for Royal Enfield Guerrilla 450 is designed for daily commuting, highway touring, and spirited weekend rides. It maintains structural durability under heat cycles and vibration. Stainless construction ensures resistance against rust in humid and mixed riding conditions. This is a performance-oriented upgrade that balances usability and mechanical simplicity. Specifications Material: Stainless SteelSystem Type: Slip-On + De-Cat PipeSlip-On Weight: ~2 kgDe-Cat Pipe Weight: ~1 kgFinish: Brushed StainlessFitment: Royal Enfield Guerrilla 450Installation: Direct Bolt-On What’s Included 1 × Powerage Slip-On Exhaust1 × Model-Specific De-Cat PipeMounting hardware (as provided by manufacturer) No additional tuning devices or remap tools are included. Fitment Designed specifically for the Royal Enfield Guerrilla 450.Not universal. Not cross-compatible with other Royal Enfield platforms unless explicitly stated by the manufacturer.

Read more less

Upgrade your Royal Enfield motorcycle with the Powerage Long Type Slip-On Exhaust, designed for riders who want a classic elongated exhaust profile combined with deeper exhaust acoustics, improved exhaust flow, and premium stainless steel construction. The long-type design delivers a more traditional Royal Enfield exhaust silhouette while enhancing the motorcycle’s visual presence and exhaust character. Engineered specifically for Royal Enfield 350 and 500 motorcycles, this exhaust system improves throttle response and provides a richer bass-heavy exhaust note without compromising everyday rideability. Dyno-tested and handcrafted using high-grade stainless steel materials, the Powerage Long Type exhaust balances classic styling with performance-focused engineering. This listing includes multiple finish variants under one product listing: Polish Finish Brushed Steel Finish Black Finish Each variant delivers the same internal construction and performance characteristics while offering a different visual finish for custom styling preferences. Finish Options Polish Finish Mirror-finished stainless steel appearance for riders seeking a premium retro chrome-inspired look. Brushed Steel Finish Industrial brushed stainless steel finish with rugged aesthetics and lower visible scratch appearance. Black Finish Aggressive matte black finish designed for stealth-themed and dark custom motorcycle builds. Key Features Compatible with Royal Enfield 350 & 500 motorcycles Long-type classic exhaust styling Deep resonant exhaust note Stainless steel construction Dyno-tested exhaust setup Improved throttle response Hand-crafted build quality Detachable dB reducer included Optimized baffle core design Synthetic wool acoustic insulation Bolt-on fitment OE-inspired aesthetics Performance Benefits The Powerage Long Type exhaust improves exhaust flow efficiency while maintaining smooth rideability for daily use and highway touring. Its elongated internal chamber design helps create a fuller and deeper exhaust note while supporting smoother mid-range power delivery and reduced exhaust restriction compared to stock systems. The exhaust also contributes to reduced overall system weight and enhanced visual appeal. Construction & Engineering Built using premium stainless steel internals and outer shell construction, the Powerage exhaust is engineered for long-term durability and corrosion resistance. The detachable dB reducer allows riders to customize the exhaust sound profile depending on riding conditions and sound preference. Its handcrafted construction quality ensures consistent fitment and premium finish detailing across all variants. Package Contents 1 x Powerage Slip-On Exhaust (Long Type) Mounting Bracket Exhaust Clamp Detachable dB Reducer Installation Hardware Important Note Select preferred finish variant before placing the order. Compatible with selected Royal Enfield 350 & 500 motorcycles only. Professional installation recommended. Exhaust sound characteristics may vary depending on dB reducer usage.

Read more less

Upgrade the sound, styling, and performance character of your Royal Enfield motorcycle with the Powerage Slip-On Exhaust Short Type edition, engineered for riders who want a deeper exhaust tone, lighter exhaust setup, and aggressive retro styling without compromising everyday usability. Designed specifically for Royal Enfield 350 and 500 platforms, this short-type slip-on exhaust delivers a compact performance-oriented profile with improved exhaust acoustics and optimized back pressure management. Manufactured using premium stainless steel construction and dyno-tested for reliable real-world performance, the Powerage exhaust system improves throttle feel while adding a richer and more resonant exhaust note. The compact short-type body design gives the motorcycle a cleaner and more aggressive stance while helping reduce overall exhaust bulk compared to stock systems. This listing includes multiple finish options under one product listing: Polish Finish Brushed Steel Finish Black Finish Each finish offers a distinct visual character while retaining the same core internal performance-focused design. Finish Options Polish Finish Mirror-polished stainless steel finish designed for riders who prefer a premium retro-inspired appearance. Brushed Steel Finish Industrial satin stainless steel finish with excellent resistance to scratches and daily wear. Black Finish Stealth-inspired matte black coating for aggressive styling and darker custom builds. Key Features Compatible with Royal Enfield 350 & 500 models Short-type compact exhaust design Deep resonant exhaust note Stainless steel construction Dyno-tested setup Improved throttle response Hand-crafted construction Detachable dB reducer included Optimized baffle core design Synthetic wool acoustic insulation Bolt-on installation OE-inspired fitment styling Performance Benefits The Powerage Short Type exhaust is engineered to improve exhaust flow efficiency while maintaining balanced rideability for everyday road use. Its compact internal baffle system helps create a bass-heavy exhaust note while preserving smoother low-end response and usable mid-range performance. The lighter construction compared to stock systems also helps improve the motorcycle’s overall feel and handling response. Construction & Engineering Manufactured using premium-grade stainless steel internals, the Powerage slip-on exhaust combines durability, corrosion resistance, and optimized acoustic insulation for long-term reliability. The detachable dB reducer allows riders to choose between a refined touring sound and a louder performance-oriented exhaust tone. Its handcrafted construction and precision weld quality provide excellent fitment consistency and premium visual appeal. Package Contents 1 x Powerage Slip-On Exhaust (Short Type) Mounting Bracket Exhaust Clamp Detachable dB Reducer Installation Hardware Important Note Select the preferred finish variant before ordering. Compatible with selected Royal Enfield 350 & 500 motorcycles only. Professional installation recommended. Exhaust note may vary depending on dB reducer installation and engine condition.

Read more less

Enhance the sound, styling, and riding experience of your Royal Enfield Classic Reborn 350 or Meteor 350 with the Powerage Slip-On Exhaust system engineered for improved exhaust flow, reduced weight, and deeper exhaust acoustics. Manufactured using premium stainless steel construction and dyno-tested for balanced real-world performance, the Powerage exhaust system delivers a stronger exhaust note, improved throttle feel, and cleaner premium aesthetics while maintaining everyday usability. Its internally engineered baffle core provides optimized back pressure and exhaust efficiency, helping preserve smooth rideability while unlocking a richer and deeper exhaust character. The exhaust includes a detachable dB reducer, allowing riders to switch between a refined touring sound and a more aggressive performance tone. This listing includes multiple finish variants under one product listing: Brushed Steel Finish Polish Finish Black Finish All variants are specifically developed for direct fitment on Royal Enfield Classic Reborn 350 and Meteor 350 motorcycles. Available Finish Variants Brushed Steel Finish Industrial-inspired satin stainless finish with strong resistance to visible scratches and heat marks. Polish Finish Mirror-like polished stainless steel appearance designed for retro premium styling enthusiasts. Black Finish Aggressive matte black styling with heat-resistant coating and stealth-inspired appearance. Key Features Compatible with Royal Enfield Classic Reborn 350 Compatible with Royal Enfield Meteor 350 Stainless steel construction Deep resonant exhaust note Detachable dB reducer included Dyno-tested setup Hand-crafted construction Improved exhaust flow efficiency Enhanced throttle response Synthetic wool acoustic insulation Optimized baffle core design OE-inspired styling and fitment Bolt-on installation Performance Benefits Better throttle response Reduced exhaust restriction Improved riding feel Deeper bass-heavy exhaust note Lightweight compared to stock exhaust Enhanced road presence Improved aesthetics Better corrosion resistance compared to stock systems Construction & Design The Powerage slip-on exhaust uses premium stainless steel internals combined with carefully tuned acoustic insulation and a precision-designed baffle core to achieve balanced performance and refined exhaust acoustics. Its slim OE-inspired body profile integrates seamlessly with the retro styling of the Classic Reborn and Meteor 350 while offering a noticeable upgrade in appearance and sound. The removable dB reducer allows riders to tune the exhaust sound according to riding preference. Package Contents 1 x Powerage Slip-On Exhaust Detachable dB Reducer Mounting Hardware Clamps & Fasteners Important Note Please select the correct finish variant before placing your order. Compatible only with Royal Enfield Classic Reborn 350 and Meteor 350. Professional installation recommended. Exhaust sound may vary depending on dB reducer installation and riding conditions.

Read more less

Powerage Slip-On Exhaust – Brushed Steel Finish for Royal Enfield Himalayan 411 Unleash the full potential of your Royal Enfield Himalayan 411 with the Powerage Slip-On Exhaust – Brushed Steel Finish, engineered for riders who demand stronger mid-range pull, sharper throttle response, and a deeper, more authoritative exhaust note without compromising reliability. Designed specifically for the Himalayan 411 platform, this slip-on exhaust system enhances exhaust gas evacuation while maintaining the precise back-pressure required for usable torque delivery. The result is a cleaner, more responsive power curve with improved throttle control across city traffic, highway cruising, and demanding off-road terrain. Crafted from high-grade stainless steel, finished in a premium brushed steel outer sleeve, and paired with a black powder-coated end cap, the Powerage Slip-On combines durability with a rugged, adventure-ready aesthetic. It resists corrosion, withstands repeated heat cycles, and maintains structural integrity under vibration-heavy riding conditions. Engineered for Real-World Torque The Himalayan 411 thrives on accessible torque rather than peak dyno figures. This exhaust is tuned accordingly. The internal baffle structure is calibrated to: • Maintain optimal back pressure• Improve throttle response consistency• Enhance mid-range torque feel• Deliver smoother roll-on acceleration• Support stable combustion under load Instead of chasing aggressive top-end spikes, the Powerage Slip-On improves how the bike feels in practical riding scenarios. Climbing gradients, navigating traffic, overtaking on highways, or riding fully loaded — throttle input becomes more predictable and controlled. Acceleration feels cleaner. Gear transitions feel more deliberate. Low-speed modulation improves in off-road conditions where traction sensitivity matters. Sound Profile – Deep, Controlled, Mechanical This is not a shrill or hollow exhaust note. The Powerage Slip-On produces a deep, bass-oriented exhaust tone that complements the Himalayan’s long-stroke single-cylinder engine. The sound remains full-bodied and mechanical without excessive rasp or metallic sharpness. Included is a removable dB reducer, allowing you to tailor output depending on: • Urban commuting• Long-distance touring• Trail riding• Local sound compliance requirements With the dB killer installed, the tone remains controlled and road-friendly.Without it, the exhaust develops a fuller, more assertive presence while retaining tonal depth. Construction & Material Integrity Each unit is handcrafted and dyno-tested to ensure consistent performance output and manufacturing quality. Material & Build Highlights: • Full stainless steel construction for rust resistance• Brushed steel finish for long-term durability• Black powder-coated end cap for added heat resistance• Reinforced weld joints for structural stability• Vibration-resistant mounting configuration• Heat-stable internal baffle assembly The brushed exterior ages gracefully and maintains a premium appearance even after exposure to mud, dust, rain, and long-distance touring. This is built for Indian riding conditions — high ambient temperatures, varied terrain, and extended operating hours. Direct Bolt-On Fitment Installation is straightforward and non-invasive. • No cutting• No welding• No ECU remap required• Uses factory mounting points The system is engineered as a direct replacement slip-on exhaust for the Royal Enfield Himalayan 411. Fitment alignment ensures correct clearance with frame components, swingarm movement, and rear suspension travel.As confirmed by Powerage technical support, this exhaust is also compatible with the Royal Enfield Scram 411 platform. All required mounting hardware (nuts, bolts, clamps) is included as supplied by the manufacturer. The entire process remains reversible if needed. Ride Experience Transformation Post-installation improvements are felt more than measured. • Stronger low-to-mid RPM response• More engaging throttle feel• Cleaner power delivery under load• Deeper mechanical exhaust character• Reduced stock exhaust weight• Sharper visual presence The Himalayan shifts from subdued to confident. Not louder for the sake of noise — but tuned for presence and response. This is an upgrade focused on riding feel, not just decibels. Technical Specifications Material: Stainless SteelFinish: Brushed Steel with Black Powder-Coated End CapFitment: Royal Enfield Himalayan 411Installation Type: Direct Bolt-OnSound Control: Removable dB Reducer IncludedDesign: Back-pressure optimized internal baffle systemApplication: Road and off-road use What’s Included • Powerage Slip-On Exhaust (Brushed Steel Finish)• Stainless steel mounting hardware• Removable dB reducer Warranty & Authenticity This product is covered under the official manufacturer warranty as per Powerage policy. RawTorque supplies genuine products sourced through authorized distribution channels. RawTorque does not provide independent warranty coverage beyond the manufacturer’s terms. For complete details, refer to the Warranty Policy.

Read more less

Powerage Slip-On Exhaust for Royal Enfield Himalayan 450 (Sherpa 450 Platform) Transform the Himalayan 450’s character with the Powerage Slip-On Exhaust, engineered specifically for riders who demand sharper throttle response, stronger mid-range pull, and a deeper, more authoritative exhaust note. Built around the Sherpa 450 platform, this system enhances exhaust flow while maintaining engine reliability — delivering a cleaner, more responsive power curve on both road and trail. The Himalayan 450 is a torque-focused machine. It thrives on usable power, not peak numbers. The Powerage Slip-On complements that philosophy by reducing back pressure and optimizing flow dynamics, allowing the engine to breathe more efficiently. The result is noticeably improved roll-on acceleration, stronger response during overtakes, and a more connected throttle feel — especially in mid-range RPMs where adventure riding lives. Whether your bike runs a Single O₂ Sensor (2024 models) or a Dual O₂ Sensor setup (2025 onwards), this exhaust is engineered with precise variant-specific compatibility. Proper sensor integration ensures smooth fueling behavior and stable rideability across altitude changes and varied terrain conditions. Engineered Benefits • Noticeably quicker throttle response• Improved mid-range torque delivery• Stronger roll-on acceleration• Deeper, bass-rich exhaust tone• More controlled engine heat dispersion• Enhanced riding feel during climbs and highway cruising This is not just about sound. It is about refining the way the Sherpa 450 feels under load. Complete Fitment System The Powerage Slip-On comes as a complete installation kit. Included in the package: • Exhaust canister• Bend pipe (model specific)• Clamps and mounting hardware• Removable DB killer• Required chims• Branded Powerage sticker Everything is designed for direct bolt-on installation using factory mounting points. No cutting. No welding. No ECU remap required. Installation is straightforward and can typically be completed with basic hand tools. The system aligns cleanly with the stock mounting geometry, ensuring proper clearance from swingarm, rear brake assembly, and chassis components. Tuned for Real-World Riding The Himalayan 450 is built for versatility — city traffic, broken tarmac, gravel tracks, mountain climbs. This slip-on is tuned to maintain rideability across all of it. The internal flow path is engineered to maintain adequate back pressure for torque retention while improving exhaust evacuation efficiency. That balance is critical on a single-cylinder engine. Too free-flowing, and you lose tractability. Too restrictive, and you choke response. This system finds the middle ground. Expect a more alive throttle response when exiting corners. Expect cleaner engine feel during sustained highway cruising. Expect stronger pull in 3rd and 4th gear during overtakes. Deep, Controlled Sound Signature Fitted with a removable DB killer, the exhaust allows you to tailor sound output based on riding conditions and regulatory requirements. With DB killer installed:• Deep, bass-heavy tone• Refined note suitable for touring Without DB killer:• More aggressive exhaust presence• Stronger low-frequency thump The sound profile is tuned to be full-bodied — not tinny, not hollow. It complements the Himalayan’s long-stroke character without becoming harsh at higher RPMs. Built for Adventure Conditions Constructed from high-quality heat-resistant materials, the Powerage Slip-On is designed to withstand: • Continuous vibration• Long riding hours• Temperature swings• Dust and off-road conditions The mounting structure maintains stability even during rough terrain riding. The finish is engineered to resist corrosion under typical Indian weather and road conditions. Rider-Focused Advantages • Stronger power delivery in loaded touring scenarios• Improved responsiveness during technical off-road sections• Enhanced throttle modulation for slow-speed control• A rugged, performance-oriented visual upgrade The Himalayan 450 is not a showpiece. It is a working machine. This exhaust respects that identity while sharpening its personality. Fitment Compatibility Royal Enfield Himalayan 450 (Sherpa 450 Platform)• Single O₂ Sensor Variant (2024)• Dual O₂ Sensor Variant (2025 onwards) Please select the correct sensor configuration before checkout to ensure proper fitment. Ride harder. Ride cleaner. Sound deliberate. The Powerage Slip-On Exhaust for Royal Enfield Himalayan 450 is built for riders who want performance refinement without compromising reliability — a balanced upgrade that feels engineered, not improvised.

Read more less

Upgrade the sound, styling, and riding character of your Royal Enfield Hunter 350 with the Powerage Slip-On Exhaust designed for improved exhaust flow, deeper acoustics, reduced weight, and enhanced throttle response. Crafted using premium stainless steel construction with a durable black powder-coated finish, this slip-on exhaust is engineered to provide a refined balance between everyday rideability and aggressive exhaust performance. The exhaust delivers a deep resonant exhaust note while maintaining usable back pressure through its internally engineered baffle core design. The included detachable dB reducer allows riders to adjust the sound profile according to personal preference and riding conditions. Hand-crafted and dyno-tested, the Powerage exhaust system improves overall motorcycle aesthetics while offering noticeable gains in responsiveness and riding feel. The compact OE-inspired profile ensures the exhaust integrates cleanly with the Royal Enfield Hunter 350 styling language while adding a more premium and performance-focused visual appearance. Key Features Designed specifically for Royal Enfield Hunter 350 Premium stainless steel construction Black powder-coated finish Deep resonant exhaust note Detachable dB reducer included Dyno-tested setup Hand-crafted construction Improved throttle response Lightweight slip-on design OE-inspired fit and styling Synthetic wool acoustic insulation Optimized baffle core for efficiency and back pressure Performance Benefits Improved exhaust flow Better throttle response Reduced exhaust weight Enhanced exhaust acoustics Improved low and mid-range feel Cleaner and sportier rear-end styling Better durability compared to stock mild steel systems Construction & Design The Powerage Hunter 350 exhaust features a precision-crafted stainless steel internal structure combined with a durable black powder-coated outer finish designed for heat resistance and long-term durability. Its internally optimized baffle core maintains balanced back pressure for smoother performance delivery while the synthetic wool insulation improves sound refinement and thermal resistance. The detachable dB reducer gives riders flexibility between a touring-friendly tone and a more aggressive performance exhaust note. Package Contents 1 x Powerage Slip-On Exhaust Detachable dB Reducer Mounting Hardware Clamps & Fasteners Important Note Compatible only with Royal Enfield Hunter 350. Professional installation recommended. Exhaust sound characteristics may vary depending on dB reducer installation. Intended for performance and aesthetic enhancement.

Read more less

Upgrade your Royal Enfield Shotgun 650 or Super Meteor 650 with the Powerage Slip-On Exhaust System engineered for riders who want deeper exhaust acoustics, premium stainless steel construction, improved throttle feel, and a cleaner premium finish. Manufactured using high-grade 304 Stainless Steel, the Powerage exhaust system is dyno-tested and designed to improve overall riding experience while maintaining reliability for long-distance touring and daily riding. This exhaust comes with a removable dB killer, allowing riders to switch between refined touring acoustics and a more aggressive exhaust note depending on riding preference. The system is available in multiple finish variants under the same listing: Brushed Steel Finish Polish Finish Black Finish All variants are specifically designed for direct fitment on the Royal Enfield Shotgun 650 and Super Meteor 650 without requiring major modifications. Available Finish Variants Brushed Steel Finish Premium brushed stainless appearance Classic industrial finish Scratch-resistant texture Polish Finish High-gloss premium polished appearance Bright chrome-style visual appeal Ideal for retro and touring builds Black Finish Stealth-inspired matte black styling Aggressive modern appearance Heat-resistant coated finish Key Features Compatible with Royal Enfield Shotgun 650 Compatible with Royal Enfield Super Meteor 650 Full 304 stainless steel construction Slip-on exhaust system Removable dB killer included Dyno-tested performance setup Enhanced exhaust note Improved throttle response Bolt-on direct fitment Touring-friendly performance tuning Lifetime warranty against rust & manufacturing defects Performance Benefits Deeper bass-heavy exhaust sound Improved exhaust flow efficiency Reduced back pressure Better throttle feel Enhanced road presence Cleaner premium visual styling Long-lasting corrosion resistance Technical Specifications Brand : Powerage Product Type : Slip-On Exhaust Compatibility : Royal Enfield Shotgun 650 / Super Meteor 650 Material : 304 Stainless Steel Exhaust Type : Slip-On Finish Options : Brushed Steel / Polish / Black dB Killer : Included, Removable Installation Type : Bolt-On Dyno Tested : Yes Performance Data Exhaust Weight : Approx. 6 kg Claimed Power Gain : Up to +1.9 bhp Important Note Please select the correct finish variant before placing your order. Compatible only with Royal Enfield Shotgun 650 and Super Meteor 650. Professional installation recommended. Exhaust sound may vary depending on riding conditions and tuning setup. Package Contents Pair of Powerage Slip-On Exhausts Removable dB Killers Mounting Hardware Clamps & Fasteners

Read more less

Upgrade your Royal Enfield Bear 650 with the Powerage Slip-On Exhaust System featuring a performance-focused de-cat pipe setup engineered for improved exhaust flow, reduced weight, deeper exhaust note, and enhanced throttle response. Manufactured entirely from premium 304 Stainless Steel, the Powerage exhaust system is dyno-tested and designed to deliver a balance of usable performance and refined sound without compromising daily rideability. This exhaust setup is available in two muffler variants: OE Type – Factory-inspired premium styling Cone Type – Sportier tapered exhaust profile Both variants include the de-cat pipe and removable dB killer, giving riders the flexibility to tune the exhaust note according to riding preference. The system significantly reduces overall exhaust weight compared to the stock setup while improving engine breathing efficiency and delivering a richer, deeper exhaust tone. Available Variants OE Type OEM-inspired exhaust styling Cleaner factory-style appearance Ideal for subtle premium builds Cone Type Sportier aggressive exhaust design Sleeker tapered muffler profile Ideal for performance-inspired builds Key Features Designed specifically for Royal Enfield Bear 650 Full 304 stainless steel construction Includes performance de-cat pipe Dyno-tested configuration Removable dB killer included Improved exhaust flow efficiency Deeper bass-heavy exhaust note Weight reduction over stock exhaust Bolt-on fitment No ECU remap mandatory for installation Lifetime warranty against rust & manufacturing defects Performance Benefits Sharper throttle response Reduced overall exhaust weight Improved engine breathing Enhanced exhaust sound character Better heat resistance compared to mild steel systems Freer exhaust flow for smoother power delivery Technical Specifications Brand : Powerage Product Type : Slip-On Exhaust System Compatibility : Royal Enfield Bear 650 Material : 304 Stainless Steel Exhaust Type : Slip-On with De-Cat Pipe Muffler Variants : OE Type / Cone Type dB Killer : Included, Removable Finish : Stainless Steel / Matte Black depending on variant Installation Type : Bolt-On Dyno Tested : Yes Weight Information Slip-On Weight : 2.5 kg De-Cat Pipe Weight : 0.7 kg Stock OE Exhaust Weight : Approx. 6.5 kg Claimed Power Gain : Up to +2.5 bhp Important Note Please select the correct exhaust variant before placing your order. This listing is compatible only with Royal Enfield Bear 650. Professional installation is recommended for best fitment and alignment. Exhaust sound may vary depending on tuning and riding conditions. Package Contents 1 x Powerage Slip-On Exhaust 1 x De-Cat Pipe Mounting Hardware Clamps & Fasteners Removable dB Killer

Read more less

Powerage Long Slip-Ons Exhaust – Black Finish for Royal Enfield Interceptor 650 & Continental GT 650 Turn your Royal Enfield Interceptor 650 or Royal Enfield Continental GT 650 into a machine that feels sharper, deeper, and more deliberate with the Powerage Long Slip-Ons Exhaust – Black Finish. Designed specifically for the Royal Enfield 650 Twins platform, this long-format slip-on system enhances tone, throttle response, and overall riding character while retaining everyday usability. The defining feature of this system is its long-body construction. The increased canister length allows for improved acoustic shaping, resulting in a low-frequency, bass-dominant exhaust note that complements the parallel-twin engine architecture. Instead of producing a high-pitched or metallic rasp, the Powerage Long Slip-Ons deliver a rounded, controlled growl that builds progressively with throttle input. Under steady cruising, the sound remains composed and refined, making it suitable for long highway rides and touring applications. Constructed from high-grade stainless steel, the slip-ons are built to withstand heat cycles, road debris exposure, and long-term usage. Stainless steel offers inherent corrosion resistance, which is essential in varied Indian weather conditions — from humid coastal environments to dusty highway corridors. The exterior is finished in a heat-resistant matte black coating, adding a stealth, factory-custom appearance that integrates seamlessly with the engine and frame components of the Interceptor 650 and Continental GT 650. Performance tuning focuses on real-world rideability rather than exaggerated claims. By improving exhaust gas evacuation, the Powerage Long Slip-Ons support a cleaner throttle transition and stronger mid-range torque response. Riders will notice improved roll-on response during overtakes, smoother acceleration out of corners, and a more defined mechanical presence during mid-range operation. The system is tuned to maintain balance — strong enough to feel, controlled enough to live with daily. The longer internal chamber volume contributes to tone stabilization. A larger acoustic path allows the exhaust pulses to expand and settle before exit, creating a deeper, fuller sound signature without harsh spikes in frequency. This becomes particularly important during long-distance touring, where excessive high-frequency exhaust notes can cause fatigue. The Powerage Long Slip-Ons are engineered to deliver presence without overwhelming the rider. Fitment is strictly direct bolt-on. No cutting. No welding. No fabrication adjustments. The slip-ons align with factory mounting points on the Royal Enfield Interceptor 650 and Continental GT 650. Installation can be completed using standard workshop tools, making it accessible for experienced riders and professional technicians alike. The stock headers remain compatible, preserving structural alignment and ground clearance. Ground clearance and lean angle geometry are maintained. The long-body design does not interfere with footpeg positioning or rider ergonomics. The system is engineered to retain practical usability, ensuring that performance enhancement does not compromise ride dynamics. The matte black finish is more than cosmetic. The coating is formulated to resist heat discoloration and surface corrosion, helping the exhaust maintain its appearance over extended usage. Combined with stainless steel construction, the system is designed for durability across touring mileage and everyday commuting. For riders seeking refinement rather than noise alone, this exhaust strikes a balanced equation between deep tone, mechanical clarity, and long-distance comfort. It enhances the character of the Royal Enfield 650 twin without pushing it into excessive loudness territory. Key Performance Highlights • Long-format slip-on design for deeper acoustic output• Matte black heat-resistant finish for stealth aesthetics• Stainless steel construction for corrosion resistance• Improved mid-range throttle feel and roll-on response• Balanced sound profile suitable for touring• Factory mounting compatibility• No ECU remap required• Direct bolt-on installation Technical Specifications Material: High-Grade Stainless SteelFinish: Matte Black (Heat Resistant Coating)Configuration: Long Slip-On Exhaust (Pair)Fitment Type: Direct Bolt-OnSound Profile: Deep, controlled, bass-focusedCompatibility: Royal Enfield 650 Twins Compatibility • Royal Enfield Interceptor 650• Royal Enfield Continental GT 650 Installation Direct bolt-on installation using existing factory mounting points.No cutting. No welding. No ECU modification required.

Read more less