ON SALE | Rawtorque

Brembo P54030X is a front-axle brake pad set for the Mitsubush Cedia, OUTLANDER II (2006 - 2012), measuring 145 mm wide and 55 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 145 mm Thickness 16 mm Height 55 mm Braking system Akebono WVA number 23584 FMSI D866 7741 Wear indicator Acoustic Accessories With anti-squeal shim With accessories Axle Front EAN code 8020584069028 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mitsubush Cedia, OUTLANDER II (2006 - 2012). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

EBC DPX2123 is a front-axle brake pad set for the Landrover DISCOVERY IV (2009 to 2016) & 4 more, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Landrover DISCOVERY IV (2009 to 2016) & 4 more. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

EBC DP42414R is a rear-axle brake pad set for the BMW 3 SERIES G20, using the EBC Yellowstuff compound, a fast-street pad with high friction from cold, built on an aramid-fibre compound.EBC Yellowstuff characteristics Compound Aramid fibre, copper-free since 2021 Intended use Fast street driving Cold friction High bite from cold, no warm-up needed Green fade threshold 400 °C (750 °F), per EBC Dust Not a low-dust pad Bedding in Beds naturally over the first 100-200 miles of urban use Approval ECE R90 approved for street use Fitment guidanceListed against the BMW 3 SERIES G20. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Brembo 08C35211 is a rear-axle brake disc for the Mini Countryman SD f60, measuring 280 mm diameter and 10 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 280 mm Thickness 10 mm Minimum thickness 8.4 mm Height 51 mm Bolt holes 5 Centering bore 67 mm Disc type Solid Axle Rear Units per box 1 EAN code 8020584232194 New thickness is 10 mm and the manufacturer's minimum is 8.4 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mini Countryman SD f60. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

Red Rooster Performance Rumbler Max Black Exhaust for Royal Enfield Hunter 350 The Red Rooster Performance Rumbler Max Black Exhaust for Royal Enfield Hunter 350 is a high-quality slip-on exhaust system. It is designed for riders seeking the perfect balance between sound character, build quality, and daily usability. Made by Red Rooster Performance, this exhaust integrates cleanly with the Hunter 350 while enhancing rideability and long-term durability. Exhaust systems affect not only the sound but also heat management, durability, and the overall riding experience. The Rumbler Max Black acts as a direct-fit replacement for the stock exhaust. This allows riders to upgrade their Royal Enfield Hunter exhaust without permanent modifications. Compatibility with the original mounting points and exhaust routing is maintained, which supports easy servicing and reversibility. Material Construction and Finish of the Royal Enfield Hunter Exhaust The Rumbler Max Black is crafted using Grade 304 stainless steel. This material is widely used in performance exhausts for its corrosion resistance and ability to withstand heat cycling. Stainless steel ensures the exhaust handles repeated thermal expansion and contraction during everyday rides and highway use without fatigue. The matte black finish complements the Hunter 350’s design with a clean, performance-focus look. When cared for properly, this finish retains its quality and appearance over long-term use under normal riding conditions. The subtle look fits well with the motorcycle’s aesthetic. Sound Character and Riding Experience Red Rooster Performance’s exhaust systems emphasize controlled sound output rather than simply increasing volume. The Rumbler Max Black delivers a deeper and more distinct exhaust note than the stock unit. Despite the heightened sound, it remains practical and unobtrusive for regular riding. This Royal Enfield Hunter exhaust includes ceramic wool packing inside. This material can handle high temperatures and vibrations for extended periods. Ceramic wool helps maintain the consistent exhaust tone as the system matures, minimizing sound degradation over normal use. Note that sound perception will vary based on riding environment, throttle usage, traffic, and external factors. Riders should always comply with local noise laws and regulations when installing aftermarket exhausts. Designed for Direct Bolt-On Installation The Red Rooster Performance Rumbler Max Black Exhaust is built for direct bolt-on installation on the Royal Enfield Hunter 350. No cutting, welding, or permanent modifications are required. This design makes it easy for riders to fit the new exhaust quickly and safely. Because it uses the motorcycle’s existing mounting points, the exhaust can be installed or removed without altering the bike’s original structure. This makes the upgrade suitable for riders who want reversible changes or may want to switch back to the stock exhaust later. Heat Resistance and Long-Term Durability Motorcycle exhausts regularly face intense heat, vibration, and environmental elements such as road debris and moisture. The stainless steel construction paired with ceramic wool packing keeps the Rumbler Max Black strong and acoustically consistent over time. The design supports daily commuting and weekend rides without performance drops caused by heat fatigue or material wear. Proper installation and maintenance ensure its durability for long-term use as an effective Royal Enfield Hunter exhaust upgrade. Compatibility and Intended Use This exhaust is designed specifically for the Royal Enfield Hunter 350. Its fitment relies on the stock exhaust layout and mounting geometry unique to this model. Use on other motorcycles is not recommended unless confirmed by the manufacturer. Functioning as a purely mechanical component, the Rumbler Max Black does not include any electronic parts. It does not require ECU remapping for regular installation conditions. Actual sound and riding feel may change depending on usage style, fuel quality, and bike condition. Installation and Ownership Considerations Installation should follow proper procedures to guarantee correct alignment, sealing, and mounting security. Exhaust fasteners should be periodically checked, especially soon after installation and during regular servicing. As with all aftermarket Royal Enfield Hunter exhaust upgrades, riders must ensure the bike complies with applicable local traffic, emission, and noise regulations when using this exhaust system. What’s Included The kit contains one Red Rooster Performance Rumbler Max Black Exhaust unit. It is tailored for direct installation on the Royal Enfield Hunter 350. Mounting components in the kit securely integrate with the factory exhaust setup, ensuring a smooth fit and performance upgrade.

Read more less

EBC DP1535 is a front-axle brake pad set for the AUDI Old A8/Bentley, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the AUDI Old A8/Bentley. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

SMK Titan Full Face HelmetThe SMK Titan is SMK's fibre-shell flagship for the full-face range. Built on Premium Fiber Technology (PFT) rather than thermoplastic, it is a genuinely different shell to the Typhoon and Stellar underneath it, and that shows in how it carries weight at speed. Pinlock 70 comes fitted in the box, the sun visor drops down on a slider, and the cheek pads are emergency-release.Technical Specifications Brand SMK Model Titan Helmet Type Full Face Shell Material Premium Fiber Technology (PFT) Certification ISI 4151 & ECE 22.06 & DOT FMVSS 218 Shell Sizes 2 EPS Multi-density Visor Pinlock® 70 fitted, scratch resistant, quick release Sun Visor Internal drop-down Visor Lock Lock'n'Release one-touch Retention Quick release strap Weight 1650 g (S shell) / 1750 g (L shell), ±50 g Interior Removable, washable, hypoallergenic Cheek Pads Emergency removable Ventilation Chin and top intakes, channeled exhausts Other Speaker pockets, eyeglass channels, aerodynamic spoiler, wind protector Available Colours GL200 - Gloss Black, MA200 - Matt Black Key Features PFT fibre shell, not thermoplastic - a step up from the Typhoon and Stellar ISI 4151, ECE 22.06 and DOT certified Pinlock® 70 anti-fog insert fitted in the box, not sold separately Internal drop-down sun visor plus Lock'n'Release one-touch visor lock Emergency removable cheek pads for safe extraction after a fall Speaker pockets and eyeglass channels built into the liner Size Chart Size Head Circumference XS 54 cm S 56 cm M 57 cm L 58 cm XL 60 cm 2XL 62 cm Two shell sizes. The smaller shell covers XS and S, the larger shell covers M through 2XL, so the helmet stays proportioned instead of looking oversized on smaller heads.Measure your head circumference at the widest point, roughly 2.5 cm above the eyebrows, and pick the closest size. If you fall between two sizes, size up.Fitment & Safety NoteHelmets are non-returnable and non-exchangeable for safety and hygiene reasons. Check your size before ordering. Colours may render slightly differently between screens.In The Box 1 × SMK Titan Full Face Helmet Clear visor (fitted) Pinlock® anti-fog insert Helmet bag and user documentation

Read more less

BMC FB305/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB305/01 is a direct-fit washable performance air filter that fits the Aston Martin DB11 / Vantage (2 filters req) and Rolls-Royce Phantom (2 req, 2008-16). Engine fitments: 5.2 V12 / 4.0 V8, 6.75 V12.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB961/04 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB961/04 is a direct-fit washable performance air filter that fits the Audi A4 (2016+). Engine fitments: 2.0 TFSI.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB960/04 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB960/04 is a direct-fit washable performance air filter that fits the Audi A5 / S5 / RS5 (2017+). Engine fitments: 3.0 TFSI.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB494/20 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB494/20 is a direct-fit washable performance air filter that fits the BMW 135i E81 E82 (2007-10). Engine fitments: 1.5.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB724/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB724/01 is a direct-fit washable performance air filter that fits the BMW 520i F10/F11/F18 (2011+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB835/20 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB835/20 is a direct-fit washable performance air filter that fits the BMW 520d F10/F11/F18 (2014+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB653/20 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB653/20 is a direct-fit washable performance air filter that fits the BMW 530i F10/F11/F18 (2011+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01025 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01025 is a direct-fit washable performance air filter that fits the Mercedes-Benz A-Class A200 W177 (2018+) and Mercedes-Benz GLA 200 (2020+). Engine fitments: 1.4.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01033 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01033 is a direct-fit washable performance air filter that fits the Mercedes-Benz A-Class A200d W177 (2018+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01045 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01045 is a direct-fit washable performance air filter that fits the Mercedes-Benz A-Class A35 AMG W177 (2018+) and Mercedes-Benz GLA 35 AMG H245 (2020+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB258/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB258/01 is a direct-fit washable performance air filter that fits the Mercedes-Benz C200 CDI W203/C203/S203 (2001-07). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB262/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB262/01 is a direct-fit washable performance air filter that fits the Mercedes-Benz S350 W220 (2 req). Engine fitments: 4.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01030 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01030 is a direct-fit washable performance air filter that fits the Volvo XC40 D4 (2017+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB853/20 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB853/20 is a direct-fit washable performance air filter that fits the Volvo V40 II Cross Country T5. Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB433/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB433/01 is a direct-fit washable performance air filter that fits the Volvo XC90 (2005-11). Engine fitments: 4.4.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FM01140 Performance Air FilterOne genuine BMC filter, multiple machines. The BMC FM01140 is a direct-fit washable performance air filter that fits the BMW Motorrad R18 (2021-22). Engine fitments: 1802cc.This is a direct replacement for the stock element — it drops into the factory airbox with no cutting or modification. BMC's multi-layer cotton-gauze media delivers freer airflow and crisper throttle response over a disposable paper filter.Why riders choose BMC Washable and reusable — clean, re-oil and refit for the life of the bike. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less

BMC FM01012/01 Performance Air FilterOne genuine BMC filter, multiple machines. The BMC FM01012/01 is a direct-fit washable performance air filter that fits the Ducati Multistrada V4 / S (2021+), Ducati Panigale V4 / 1000R (2018+ / 2019+) and Ducati Streetfighter V4 1100 (2020+). Engine fitments: 1103cc, 1103cc / 998cc, 1158cc.This is a direct replacement for the stock element — it drops into the factory airbox with no cutting or modification. BMC's multi-layer cotton-gauze media delivers freer airflow and crisper throttle response over a disposable paper filter.Why riders choose BMC Washable and reusable — clean, re-oil and refit for the life of the bike. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less