Products

Red Crash Guard for TVS Apache RTX 300 – Engine and Frame Protection The Mototorque Crash Guard Red for TVS Apache RTX 300 is designed to provide structural side protection to the engine and lower frame area of the motorcycle. Built specifically for the TVS Apache RTX 300, this crash guard integrates with the chassis mounting points to create a reinforced protective structure intended for minor falls and low-impact situations. The engine casing and lower frame sections are among the most exposed structural areas during a tip-over. Even low-speed drops during parking, tight maneuvering, or uneven surfaces can result in scratches, dents, or direct casing impact. A crash guard introduces an external structural layer that absorbs the initial point of contact before the engine or frame directly touches the ground. This red-finished crash guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures alignment with factory mounting geometry when installed correctly. Structural accessories must follow chassis balance and clearance to avoid unwanted vibration or misalignment. Designed Specifically for TVS Apache RTX 300 This crash guard is not universal. It is structured around the frame geometry of the TVS Apache RTX 300. Fitment advantages include: • Alignment with factory mounting points• Maintains ground clearance profile• Structured positioning around engine casing• Compatible with stock frame layout when installed properly Model-dedicated engineering ensures the guard complements the motorcycle’s structural design. Structural Protection for Real-World Riding Motorcycles can experience low-speed falls during urban riding, parking scenarios, or while navigating rough surfaces. In such cases, a crash guard can reduce direct impact exposure to the engine casing. This crash guard helps: • Reduce direct engine casing contact during tip-overs• Provide added side reinforcement• Distribute impact force across the guard structure• Support protective coverage in everyday riding conditions It is important to define scope clearly. This crash guard is intended to reduce damage during low-impact or tip-over situations. It is not designed to eliminate damage in high-speed collisions or major accidents. Red Finish – Visible Structural Presence The red finish introduces a bold contrast to the TVS Apache RTX 300’s side profile. Protective accessories can serve both structural and visual purposes. For riders who prefer a visible, performance-oriented stance, the red crash guard adds presence while retaining protective functionality. The finish integrates with the lower chassis area without appearing oversized when installed correctly. Practical Use Case This crash guard suits: • Daily commuters navigating traffic-dense environments• Riders frequently parking in tight spaces• Touring riders covering mixed surfaces• Owners seeking additional structural protection Protective accessories help preserve the condition of exposed engine areas and support long-term ownership value. Installation and Fitment Professional installation is recommended to ensure secure alignment and correct torque settings. Structural accessories must be mounted properly to perform effectively. Since this crash guard is designed specifically for the TVS Apache RTX 300, installation aligns with factory geometry when installed as intended. Build and Application • Designed for: TVS Apache RTX 300• Application: Engine and lower frame side protection• Finish: Red This accessory integrates into the chassis structure while maintaining intended riding ergonomics.Configuration Note:This model is equipped with standard integrated sliders. The slider assembly in this version does not include a beak extension. Customers seeking a beak-style slider design should verify compatibility before placing an order. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Moto Torque Replica Black Exhaust for Royal Enfield (BS4) – Black Finish Product Description The Moto Torque Replica Black Exhaust (BS4) is designed for riders who prefer a stock-style exhaust profile with a deeper bass tone while maintaining a dark finish. The exhaust follows a replica-style design that closely resembles the traditional Royal Enfield exhaust silhouette. Constructed as a performance-oriented exhaust, the Moto Torque Replica Black Exhaust BS4 features ceramic blanket insulation within its internal structure. The insulation forms part of the exhaust assembly and supports the internal configuration of the unit. The exhaust comes with a black finish, giving it a darker appearance compared to chrome variants while maintaining the long replica-style body design. The overall layout follows the familiar exhaust shape commonly associated with Royal Enfield motorcycles. For riders looking for a replica-style black exhaust compatible with BS4 motorcycles, this Moto Torque Replica Black Exhaust offers a replacement exhaust option with ceramic insulation and a black exterior finish. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS4 Finish: Black Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Black Exhaust for Royal Enfield (BS6) – Black Finish Product Description The Moto Torque Replica Black Exhaust (BS6) is designed for riders who prefer a stock-style exhaust profile with a deeper bass tone while maintaining a dark exterior finish. The exhaust follows a replica-style design that closely resembles the traditional Royal Enfield exhaust layout. The Moto Torque Replica Black Exhaust BS6 is described as a performance-oriented exhaust and features ceramic blanket insulation as part of its internal construction. This insulation forms part of the exhaust assembly and supports the internal structure of the unit. The exhaust comes with a black finish, giving the motorcycle a darker exhaust appearance compared to chrome variants. The elongated replica-style body maintains the familiar exhaust silhouette commonly associated with Royal Enfield motorcycles. For riders looking for a replica-style black exhaust compatible with BS6 motorcycles, this Moto Torque Replica Black Exhaust provides a replacement exhaust option with ceramic insulation and a black exterior finish. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS6 Finish: Black Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Chrome Exhaust for Royal Enfield (BS4) – Chrome Finish Product Description The Moto Torque Replica Chrome Exhaust (BS4) is designed for riders who prefer a stock-style exhaust appearance with a deeper bass tone. This replica-style exhaust maintains the classic Royal Enfield exhaust look while offering a different sound character. The Moto Torque Replica Chrome Exhaust BS4 is described as a performance-oriented exhaust and is built with ceramic blanket insulation as part of its internal construction. The insulation forms a protective layer within the exhaust assembly. Finished in chrome, the exhaust maintains a polished appearance that complements motorcycles styled with classic or retro design elements. The elongated replica design closely follows the traditional exhaust form factor. For riders looking for a replica-style chrome exhaust for BS4 motorcycles, this Moto Torque Replica Chrome Exhaust provides a chrome-finished replacement exhaust option with insulated internal construction. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS4 Finish: Chrome Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Moto Torque Replica Chrome Exhaust for Royal Enfield (BS6) – Chrome Finish Product Description The Moto Torque Replica Chrome Exhaust (BS6) is designed for riders who prefer a stock-style exhaust appearance with a deeper bass tone. This exhaust follows a replica-style design that closely resembles the traditional Royal Enfield exhaust profile. The Moto Torque Replica Chrome Exhaust BS6 is described as a performance-oriented exhaust and is constructed with ceramic blanket insulation within its internal structure. The insulation forms part of the exhaust assembly and is intended to support the exhaust’s internal configuration. The exhaust features a chrome exterior finish, giving it a polished metallic appearance that complements classic motorcycle styling. The long replica design maintains the familiar silhouette associated with Royal Enfield exhaust systems. For riders looking for a replica-style chrome exhaust compatible with BS6 motorcycles, this Moto Torque Replica Chrome Exhaust offers a replacement exhaust option with ceramic insulation and chrome finish. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Version: BS6 Finish: Chrome Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Royal Enfield Classic 350 Reborn Replica Exhaust Black – Moto Torque Product Description The Moto Torque Replica Exhaust for Royal Enfield Classic 350 Reborn (Black) is designed specifically for the Royal Enfield Classic 350 Reborn platform. This exhaust follows a replica-style design intended to maintain a traditional exhaust silhouette while offering a darker exterior finish. The Royal Enfield Classic 350 Reborn Replica Exhaust Black features an elongated exhaust body that closely resembles the stock exhaust profile used on Royal Enfield motorcycles. The black exterior finish provides a darker visual appearance compared to chrome exhaust variants. This exhaust is described as a performance-oriented replica exhaust and includes ceramic blanket insulation as part of its internal construction. The insulation forms part of the internal assembly of the exhaust unit. For riders looking to install a replica-style black exhaust specifically for the Royal Enfield Classic 350 Reborn, this Moto Torque exhaust provides a replacement exhaust option designed around the Classic 350 Reborn exhaust layout. Warranty Disclaimer This product does not carry any manufacturer warranty. Rawtorque does not provide any additional warranty coverage for this product. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Moto Torque Product Type: Motorcycle Exhaust Motorcycle Compatibility: Royal Enfield Classic 350 Reborn Finish: Black Insulation: Ceramic Blanket Insulation Installation Type: Replacement Exhaust

Read more less

Reservoir Oil Guard SS for TVS Apache RTX 300 – Hydraulic Fluid Protection Accessory The Mototorque Reservoir Oil Guard SS for TVS Apache RTX 300 is engineered to provide structural protection for the front brake and clutch reservoir oil bottles. Designed specifically for the TVS Apache RTX 300, this guard is crafted from stainless steel (SS) and built to shield the hydraulic fluid reservoirs from stones, debris, accidental knocks, and everyday environmental exposure during city riding, touring, or trail use. Brake and clutch reservoirs are vital components of the hydraulic control systems. Positioned near the handlebar area, these compact fluid containers are exposed to the elements and potential impacts from road debris, fallen objects, or close traffic movement. Even minor damage to these components can lead to fluid leakage, compromised performance, or costly replacement. A reservoir guard introduces a protective barrier — helping reduce direct contact with external hazards while preserving normal hydraulic function when installed correctly. This reservoir oil guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures precise alignment with the motorcycle’s brake and clutch reservoir geometry, maintaining proper clearance for control cables, lever movement, and handlebar operation. Designed Specifically for TVS Apache RTX 300 This accessory is not a universal solution. It is structured around the defined mounting and reservoir layout of the TVS Apache RTX 300 to ensure: • Precise alignment with factory reservoir positioning• Full clearance for brake and clutch lever travel• No interference with fluid lines or cable routing• Seamless integration with the motorcycle’s front assembly Accurate fitment is important because reservoir mounts sit near essential controls — even minor misalignment can affect usability or serviceability. Stainless Steel Construction and Durability The guard is constructed from stainless steel (SS), chosen for its durability, corrosion resistance, and endurance in demanding riding environments. Stainless steel offers long-term resilience against rust, rain exposure, dust, and road grime — which is especially important in components that are in direct contact with hydraulic systems and exposed elements. Stainless steel construction provides: • High corrosion resistance and rust protection• Structural rigidity under impact exposure• Minimal deformation under real-world riding conditions• Low-maintenance durability This material choice ensures that the guard continues to provide protection even after extended use in varied environmental conditions. Functional Protection in Real-World Riding Conditions Motorcycles are regularly exposed to: • Loose gravel and stones on highways• Dust and particulate matter on rural roads• Water and spray during wet conditions• Close-quarter contact in urban traffic Hydraulic reservoir bottles, while compact, are continuously exposed to such conditions. Without protection, even minor impacts can leave scratches or cracks that may compromise the fluid compartment integrity. A reservoir guard introduces a protective shield that helps deflect incidental impacts and preserves the component’s structural condition. It’s important to clarify scope: this accessory is designed to reduce exposure to surface impact and debris contact. It does not alter hydraulic performance or replace regular maintenance procedures such as fluid checks or brake/clutch bleeding. Practical Use Cases This reservoir oil guard is suitable for: • Daily commuters navigating city streets• Touring riders covering long distances• Riders crossing mixed terrains• Owners focused on preserving control system integrity Reservoir protection helps maintain the condition of exposed hydraulic components, which in turn supports consistent brake and clutch performance. Installation and Fitment Professional installation is recommended to ensure secure alignment and proper torque settings. Mounting accessories near control systems requires accurate positioning to avoid interference with controls or cable routing. Because this reservoir oil guard is designed specifically for the TVS Apache RTX 300, installation aligns with the motorcycle’s handlebar and reservoir geometry when mounted correctly. Build and Application • Designed for: TVS Apache RTX 300• Material: Stainless Steel (SS)• Application: Brake & clutch reservoir oil protection This accessory integrates with the motorcycle’s front assembly while maintaining intended control accessibility and fluid line routing. Warranty • Lifetime Warranty on stainless steel reservoir guard and stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

The Moto Torque Saddle Stay for Honda CB200X is designed specifically to provide a stable and structured mounting solution for saddle bags on the Honda CB200X. This is a model-specific accessory engineered around the CB200X rear frame geometry. It is not a universal saddle support. Model-Specific Compatibility – Honda CB200X Designed exclusively for Honda CB200X Structured to align with factory mounting geometry Intended to support secure saddle bag installation Compatibility with other motorcycles is not stated. Construction & Structural Design Built using Mild Steel 19mm tubes 1.6mm wall thickness Designed for strength and durability The 19mm tube structure combined with 1.6mm wall thickness is engineered to provide a balanced combination of rigidity and structural reliability for luggage mounting. Mounting Hardware Comes with Stainless Steel 304 grade nuts and bolts Lifetime warranty on nuts and bolts (as stated) Stainless Steel 304 hardware supports corrosion resistance and long-term mounting stability. Intended Use Suitable for: Touring riders using saddle bags Daily riders carrying light luggage Long-distance rides requiring rear-side luggage support Load capacity is not specified in the official listing. Weight distribution should be balanced to maintain riding stability. Design Integration Designed to complement the Honda CB200X profile Structured to integrate with the motorcycle’s rear section Intended to maintain functional clearance when installed properly Warranty Information Lifetime warranty on nuts and bolts 6 months warranty on powder coating Rawtorque does not provide additional warranty beyond manufacturer terms. Product Specifications Brand: Moto Torque Product Type: Saddle Stay Motorcycle Compatibility: Honda CB200X Material: Mild Steel Tube Diameter: 19mm Wall Thickness: 1.6mm Hardware: Stainless Steel 304 nuts & bolts Finish: Powder Coated

Read more less

Saddle Stay for TVS Apache RTX 300 – Rear Bag, Rack & Luggage Support The Mototorque Saddle Stay for TVS Apache RTX 300 is a purpose-built rear support frame designed to help riders install saddle bags, tail bags, luggage racks, or additional load accessories on the back of the motorcycle. Developed specifically for the TVS Apache RTX 300, this saddle stay integrates seamlessly with the motorcycle’s rear structure to provide a stable anchor point that enhances overall utility without compromising on fitment or ride stance when installed correctly. For many riders, especially those who tour or commute with luggage, adding dedicated mounting points significantly improves load management and safety. Traditional straps and hooks offer temporary solutions, but a dedicated saddle stay offers consistent structural support that keeps luggage secure over long distances and varied terrain. This saddle stay is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility is critical because generic mounts can interfere with suspension travel, passenger seating, or luggage clearance if not aligned with the bike’s original design intent. Designed Specifically for TVS Apache RTX 300 This saddle stay is not a universal accessory. It is crafted around the rear frame geometry of the TVS Apache RTX 300, delivering: • Proper alignment with stock mounting points• Clearance for passenger seat and luggage positioning• Stable luggage attachment structure• No forced modification of the motorcycle’s rear frame A correctly designed saddle stay ensures that added accessories do not disrupt the motorcycle’s balance or passenger comfort. Functional Utility for Long Rides and Everyday Use A saddle stay enhances utility in practical rider scenarios. Whether riders are setting up: • Saddle bags• Tail bags• Dry bags• Small luggage boxes …this accessory provides a designated structural anchor that improves load distribution and reduces movement during motion. Unlike temporary solutions, a structural saddle stay remains stable even with luggage attached during acceleration, cornering, and braking. When installed properly, it becomes an extension of the motorcycle’s load-bearing framework. It is important to define scope clearly: this saddle stay does not replace panniers or hard luggage systems but supports soft luggage and gear stability. It does not impact suspension or load rating unless excessive weight is applied beyond safe limits. Build and Integration The saddle stay is engineered with structural strength in mind. It is designed to sit at the rear of the motorcycle, providing secure attachment points for gear that extends beyond the factory seat area. Key characteristics include: • Stable load attachment potential• Model-specific alignment• Designed for reliable everyday use This accessory supports riders who approach touring, long commutes, or multi-day rides with additional gear requirements. Real-World Use Scenarios This saddle stay is suited for: • Touring riders carrying overnight bags• Daily commuters with backpacks or gear• Riders navigating mixed terrain with luggage needs• Motorcyclists who prefer structured luggage attachment points A saddle stay is practical for riders seeking consistent luggage positioning without improvised strap systems that can loosen over time. Installation and Fitment Professional installation is recommended to ensure secure mounting and alignment. Structural accessories must be mounted correctly to support load without movement or vibration. Since this saddle stay is designed specifically for the TVS Apache RTX 300, installation should align with the bike’s rear frame geometry when positioned properly. Build and Application • Designed for: TVS Apache RTX 300• Application: Rear luggage support and mounting framework This accessory integrates into the motorcycle’s rear area to support luggage and gear without interfering with seating or control systems. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Purpose-Built Saddle Stay for XSR 155 The Moto Torque Saddle Stay is designed specifically for the Yamaha XSR 155 to support saddle bags and luggage during daily rides and longer journeys. Its structure helps maintain bag positioning and prevents unwanted movement or contact with critical components. 🧳 Stable Luggage Support Provides a dedicated frame for saddlebag mounting Helps keep luggage securely positioned Reduces sway during riding 🏗️ Strong Tubular Construction Built using durable metal tubing Designed to handle everyday riding loads Maintains structural stability over time 🎯 Bike-Specific Fitment Designed for Yamaha XSR 155 Mounts using existing points No cutting or modification required 🎨 Clean Integrated Design Black finish complements the bike’s styling Blends with overall rear profile Maintains minimal visual clutter 🛠️ Installation Bolt-on installation Straightforward mounting process Compatible with standard saddlebag setups 📦 Compatibility Yamaha XSR 155 ⚠️ Important Notes Designed for saddlebag support (not a load-bearing carrier platform) Ensure proper luggage fastening before riding Load capacity depends on mounting and riding conditions 🛡️ Warranty Manufacturer warranty as provided by Moto Torque RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, refer to our warranty policy. ⚙️ SPECIFICATIONS Product Type: Saddle Stay Material: Metal Tubular Frame Finish: Black Fitment: Bolt-On Compatibility: Yamaha XSR 155

Read more less

Side Stand Extender for TVS Apache RTX 300 – Enhanced Support and Footprint Stability The Mototorque Side Stand Extender for TVS Apache RTX 300 is engineered to increase the contact area of the motorcycle’s side stand, providing a sturdier platform when parked on soft or uneven surfaces such as dirt, sand, grass, gravel, or hot asphalt. Designed specifically for the TVS Apache RTX 300, this side stand extender integrates seamlessly with the motorcycle’s existing side stand without interfering with normal operation or ride mechanics when installed correctly. Parking stability matters more than most riders realize. On soft or sloping ground, a standard side stand can dig into the surface, causing the motorcycle to lean excessively or even topple. A side stand extender distributes the weight over a larger footprint, giving riders confidence that their motorcycle will remain upright and steady when parked in a variety of real-world environments. This side stand extender is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures clean alignment with the original side stand’s foot and maintains proper clearance relative to the motorcycle’s frame when mounted correctly. Designed Specifically for TVS Apache RTX 300 This accessory is not universal. It is built around the specific dimensions and profile of the TVS Apache RTX 300’s side stand to ensure: • Accurate alignment with the stock side stand foot• Greater surface contact without interfering with fold-up operation• Stable mounted position that does not alter original stand geometry• No forced modification of the motorcycle’s frame Accurate fitment supports stability and eliminates the issue of imbalance caused by temporary pad solutions that don’t stay attached. Functional Utility in Real-World Parking Scenarios Riders frequently encounter parking on surfaces that don’t provide firm support: • Gravel lots• Sandy shoulders• Wet or muddy patches• Asphalt in hot weather• Grass and roadside terrain In these environments, a standard side stand can sink or tilt, leading to an unstable parked position. The side stand extender increases the effective surface area beneath the stand foot, reducing the likelihood of pressure points and surface penetration. It’s important to understand scope: this extender is intended to improve parking stability and support. It does not affect ride performance, braking, or steering dynamics. Build and Integration The side stand extender is designed with durability and practical utility in mind. When installed, it remains securely attached to the original side stand foot without causing interference during fold-up or retraction. Key service characteristics include: • Structural design that increases surface footprint• Compatibility with factory side stand movement• No impact on ground clearance while riding• Easy install with existing side stand hardware The design focuses on reliability and convenience, making it suitable for riders who park on varied terrain. Practical Use Case This side stand extender suits: • Daily commuters parking on uneven roads• Adventure riders encountering soft ground• Touring riders in mixed environment stops• Urban riders with limited parking space Parking stability is often overlooked until it becomes a problem. This accessory helps preempt that situation by adding a reliable support system. Installation Considerations Professional installation is recommended to ensure secure alignment and proper torque settings. Mounting accessories that attach to moving components must be installed correctly to avoid slippage or unintended movement. Since the side stand extender is designed for the TVS Apache RTX 300, it aligns with the existing side stand geometry when installed properly. Build and Application • Designed for: TVS Apache RTX 300• Application: Side stand surface footprint extension This accessory adds enhanced parking support while maintaining intended stand operation. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Silver Chain Guard for TVS Apache RTX 300 – Rear Sprocket and Chain Protection The Mototorque Chain Guard Silver for TVS Apache RTX 300 is designed to provide structured protection for the motorcycle’s chain and rear sprocket area. Built specifically for the TVS Apache RTX 300, this silver-finished chain guard integrates with the rear assembly to deliver coverage that supports both drivetrain cleanliness and component shielding without interfering with normal chain motion when installed properly. The chain and rear sprocket area on a motorcycle remains one of the most exposed mechanical zones. Road dust, gravel, water splashes, and loose debris are constant environmental factors that interact directly with the exposed drive components. Although routine chain maintenance — cleaning and lubrication — is essential for longevity, a properly positioned guard adds an extra protective layer that can reduce direct impact from debris and surface exposure. Developed exclusively for the TVS Apache RTX 300, this chain guard aligns with the motorcycle’s factory mounting configuration. Model-specific compatibility ensures proper spacing relative to the chain path and rear wheel movement, reducing the potential for unwanted contact or interference during operation. Designed Specifically for TVS Apache RTX 300 This chain guard is not a universal fit. It is engineered around the chassis and rear assembly of the TVS Apache RTX 300 to ensure: • Proper fitment with stock mounting points• Adequate clearance for drivetrain motion• Maintenance of chain and wheel alignment• Stable integration with the motorcycle’s rear structure Accurate fitment is crucial in drivetrain accessories, as incorrect positioning can cause drag, noise, or premature wear. Functional Protection in Real-World Conditions As motorcycles progress through real-world environments, they are continually exposed to environmental elements that interact with the drivetrain: • Dust and dirt picked up on rural or urban roads• Water splashes during monsoon or wet conditions• Small stones and gravel impact during highway runs• Road grit accumulation around moving parts A chain guard acts as a protective framework to reduce direct exposure to these elements. While regular cleaning and proper lubrication remain part of essential maintenance, the added guard helps create a controlled space that minimizes open-path impact. It’s important to clarify scope. A chain guard is designed to support component protection against external exposure and debris path interaction. It does not replace routine chain maintenance or impact the core mechanical operation of the drivetrain. Silver Finish – Functional with Subtle Style The silver finish adds a refined visual accent to the rear section of the TVS Apache RTX 300. Riders who prefer subtle design statements often favor metallic finishes that enhance structural elements without overpowering the motorcycle’s original aesthetic. The silver tone integrates cleanly with the bike’s rear assembly, making it a balanced visual upgrade while maintaining functional intent. Practical Use Case This chain guard suits: • Daily commuters navigating mixed road conditions• Long-distance riders covering highways or rural routes• Motorcycle owners riding during monsoon seasons• Riders looking for drivetrain protection with a discreet visual accent Protective rear-end accessories are practical investments that help support mechanical longevity in high-exposure zones. Installation and Fitment Proper installation is recommended to ensure secure alignment and stable positioning. Structural accessories should be mounted firmly to avoid vibration or movement during operation. Since this chain guard is designed for the TVS Apache RTX 300, it aligns with stock geometry when installed correctly. Build and Application • Designed for: TVS Apache RTX 300• Application: Chain and rear sprocket protection• Finish: Silver This accessory adds structural coverage to the drivetrain area while maintaining intended movement flow. Warranty • 6 Months Warranty on mild steel chain guard and powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 – Beak-Compatible Design The Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 is designed to provide structural protection while maintaining compatibility with the motorcycle’s front-end design, including beak setups. Built using mild steel construction, the crash guard is intended to offer support around key impact areas such as the engine and lower frame. The design integrates multiple slider points, positioned to help manage contact during low-speed falls or tip-overs. The Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 is developed for direct fitment, aligning with the motorcycle’s mounting points without requiring modification. Key design highlights include: Beak-compatible structure – accommodates the RTX 300 front designMulti-point mounting layout – distributes load across mounting areasIntegrated sliders – positioned to reduce direct impact transferPowder-coated black finish – for surface protection and finish durability This crash guard is intended for riders looking to add a protection layer without altering the overall stance or design of the motorcycle. Specifications Brand: Moto TorqueProduct Type: Crash GuardCompatibility: TVS Apache RTX 300Material: Mild SteelFinish: Black (Powder Coated)Installation: Direct Fit (Bolt-on)Design: Beak-Compatible with integrated sliders

Read more less

TVS Apache RTX 300 Stallion Pro Crash Guard Red – Mototorque Product Description The TVS Apache RTX 300 Stallion Pro Crash Guard Red from Moto Torque is designed specifically for the TVS Apache RTX 300. This crash guard is developed as a model-specific protection accessory, engineered to align with the RTX 300 chassis. Constructed from heavy-duty mild steel, the guard is built with a four-point mounting structure. The layout is intended to distribute impact forces across mounting points during tip-over scenarios. The unit includes impact-absorbing sliders, positioned to create spacing between the motorcycle body and the ground surface. The TVS Apache RTX 300 Stallion Pro Crash Guard Red features a black-compatible precision fitment design tailored exclusively for the RTX 300 platform. It is finished in Red powder coating, forming a corrosion-resistant surface layer. The design integrates with the frame geometry of the TVS Apache RTX 300 without requiring structural modifications. This crash guard is positioned as a direct-fit protection solution for riders seeking engine and lower frame coverage on the TVS Apache RTX 300. Warranty Disclaimer This product includes a 6-month manufacturer warranty and a lifetime warranty on stainless steel nuts and bolts, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Mototorque Product Type: Crash Guard Motorcycle Compatibility: TVS Apache RTX 300 Material: Mild Steel Finish: Red Powder-Coated Mounting Type: Four-Point Mounting Sliders: Impact-Absorbing Sliders Included Warranty: 6 Months Manufacturer Warranty Hardware Warranty: Lifetime on Stainless Steel Nuts and Bolts

Read more less

TVS Apache RTX 300 Stallion Pro Crash Guard White – MotoTorque Product Description The TVS Apache RTX 300 Stallion Pro Crash Guard White from Moto Torque is designed specifically for the TVS Apache RTX 300. This crash guard is developed as a model-specific protection accessory, engineered to align with the RTX 300 chassis. Constructed from heavy-duty mild steel, the guard is built with a four-point mounting structure. The layout is intended to distribute impact forces across mounting points during tip-over scenarios. The unit includes impact-absorbing sliders, positioned to create spacing between the motorcycle body and the ground surface. The TVS Apache RTX 300 Stallion Pro Crash Guard White features a black-compatible precision fitment design tailored exclusively for the RTX 300 platform. It is finished in white powder coating, forming a corrosion-resistant surface layer. The design integrates with the frame geometry of the TVS Apache RTX 300 without requiring structural modifications. This crash guard is positioned as a direct-fit protection solution for riders seeking engine and lower frame coverage on the TVS Apache RTX 300. Warranty Disclaimer This product includes a 6-month manufacturer warranty and a lifetime warranty on stainless steel nuts and bolts, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: MotoTorque Product Type: Crash Guard Motorcycle Compatibility: TVS Apache RTX 300 Material: Mild Steel Finish: White Powder-Coated Mounting Type: Four-Point Mounting Sliders: Impact-Absorbing Sliders Included Warranty: 6 Months Manufacturer Warranty Hardware Warranty: Lifetime on Stainless Steel Nuts and Bolts

Read more less

Why Choose the Moto Torque Saddle Stay for Suzuki V-Strom SX 250? The Moto Torque Suzuki V-Strom SX 250 Saddle Stay is engineered specifically for the Suzuki V-Strom SX 250, designed to provide a stable mounting structure for saddle bags and luggage systems. This is a model-specific accessory and is not intended for universal fitment. Built Specifically for Suzuki V-Strom SX 250 Designed exclusively for V-Strom SX 250 Engineered for seamless alignment with factory geometry Structured to integrate with the motorcycle’s rear frame layout Fitment is tailored to the V-Strom SX 250 platform as stated in the official product content. Structural Construction Fabricated from rigid mild steel Uses 19 mm tubes 1.6 mm wall thickness Designed for lightweight yet robust performance The structure is intended to provide secure and stable saddle bag attachment while maintaining structural balance. Stainless Steel Hardware Crafted using Stainless Steel 304 grade nuts and bolts Designed for durability Includes lifetime warranty on nuts and bolts (as per manufacturer) Stainless steel hardware supports corrosion resistance and long-term mounting reliability. Installation & Fitment Engineered for straightforward installation Designed to support saddle bag mounting convenience Structured to preserve the motorcycle’s rear profile Proper installation is recommended to ensure correct alignment and load distribution. Intended Use Suitable for: Touring riders carrying side luggage Daily riders using saddle bags Long-distance riding requiring additional storage support This saddle stay is intended to support luggage systems. Load capacity specifications are not mentioned in the official listing and should be verified before heavy-duty usage. Warranty Lifetime warranty on all nuts and bolts Warranty terms subject to manufacturer policy Rawtorque does not provide a separate warranty beyond the manufacturer’s coverage. Product Specifications Brand: Moto Torque Product: Saddle Stay Motorcycle Compatibility: Suzuki V-Strom SX 250 Material: Mild Steel Tube Diameter: 19 mm Wall Thickness: 1.6 mm Hardware: Stainless Steel 304 nuts & bolts Application: Saddle bag mounting support

Read more less

The Moto Torque Tornado Crash Guard v2.0 is designed specifically for the Suzuki V-Strom SX 250, providing structural protection to the engine and lower frame area. This crash guard is built using forged iron 25mm cold rolled (CR) mild steel tubes with reinforced wall thickness of 1.6mm, as stated in the official product description. This is not a universal crash guard. It is engineered exclusively for the Suzuki V-Strom SX 250 platform. Model-Specific Engineering Designed for Suzuki V-Strom SX 250 Precision-positioned mounting points Structured alignment with chassis geometry Intended to distribute impact force through engineered mounting locations Fitment is tailored specifically for the V-Strom SX 250. Compatibility with other motorcycles is not stated. Heavy-Duty Construction 25mm CR mild steel tubes 1.6mm reinforced wall thickness Designed to absorb initial impact force Intended to disperse shock energy before it reaches the engine and frame The manufacturer states that the high-impact nylon slider acts as the first line of defence, absorbing and dispersing impact energy. Integrated High-Impact Nylon Slider Strategically positioned nylon slider Designed to absorb initial force during a fall Intended to protect engine, frame, and essential components The slider functions as an external impact interface before direct contact reaches structural components. Scope clarification: This crash guard is intended to reduce damage during tip-overs and low to moderate impact scenarios. It is not designed to prevent damage in high-speed collisions. Mounting & Hardware Precisely positioned mounting points Secured using high-grade stainless steel 304 nuts and bolts Designed for structured load distribution Proper installation is necessary to ensure intended structural performance. Real-World Use Case Suitable for: Urban riding conditions Long-distance touring Mixed surface riding Riders seeking added engine and frame protection Protective accessories are intended to reduce exposure of critical components during falls or slides. What’s Included Crash guard assembly Integrated nylon sliders Stainless steel 304 nuts and bolts DIY fitment guide (as mentioned) Warranty 6 Months Warranty on paint/powder coating & welding Lifetime Warranty on bolts & nuts Rawtorque does not provide a separate warranty beyond manufacturer coverage. Warranty claims are subject to manufacturer policy. Product Specifications Brand: Moto Torque Product Name: Tornado Crash Guard v2.0 Motorcycle Compatibility: Suzuki V-Strom SX 250 Material: 25mm Cold Rolled Mild Steel Wall Thickness: 1.6mm Slider Type: High-impact nylon Hardware: Stainless Steel 304 Application: Engine & frame side protection

Read more less

Moto Torque Back Carrier for TVS Ronin (Compatible Till 2024 Models) The Moto Torque TVS Ronin Back Carrier is engineered specifically for the TVS Ronin to provide structured rear luggage support. Designed using heavy-duty mild steel construction and precision manufacturing processes, this back carrier supports luggage mounting while maintaining structural stability. Built to withstand regular touring and daily riding needs, the carrier supports top box or luggage bag mounting up to 5 kg. Designed for TVS Ronin • Compatible with TVS Ronin models till 2024• Model-specific precision fitment• Designed for rear luggage mounting• Provision for Moto Torque Back Rest (sold separately) Material & Construction • 3 mm thick Mild Steel construction• HOT Rolled (HR) sheets for strength and durability• CNC laser cut for precision finish• Stainless Steel 304 grade nuts and bolts The HR mild steel structure enhances load-bearing strength and durability. Finish & Manufacturing • Grit blasting before powder coating for uniform surface finish• Black texture powder-coated finish for premium look Load Capacity • Supports top box / luggage bags up to 5 kg Installation • Comes with “Do It Yourself” fitment guide Warranty • Lifetime warranty on Stainless Steel 304 nuts & bolts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: TVS Ronin (Till 2024 Models)• Material: Mild Steel (3 mm)• Sheet Type: HOT Rolled (HR)• Finish: Black Texture Powder Coated• Load Capacity: Up to 5 kg• Fasteners: Stainless Steel 304

Read more less

Moto Torque Crash Guard for TVS Ronin The Moto Torque TVS Ronin Crash Guard is engineered specifically for the TVS Ronin to provide structural protection during unforeseen impacts. Designed using rigid mild steel tubing and precision manufacturing processes, this crash guard supports durability, impact resistance, and controlled force distribution. Built to protect critical components such as the engine casing, exhaust front bend pipe, tank, and handlebar area, this guard integrates reinforcement and slider protection for enhanced structural safety. Designed for TVS Ronin • Precision-engineered for TVS Ronin• Model-specific fitment• Designed to protect engine case & head• Protects exhaust front bend pipe• Covers front body area Material & Construction • Rigid Mild Steel tubes – 22.2 mm diameter• 2 mm wall thickness• Cold Rolled (CR) tubes for high durability• Stainless Steel 304 grade nuts and bolts The CR mild steel construction enhances structural integrity and impact resistance. Manufacturing Process • MIG welding technology for strong joint connection• Grid blasting before powder coating for uniform finish• Automated CNC bending for precision tube formation Protection Features • Comes with 2 sliders (one on each side)• Designed to protect tank and handlebar• Protects front portion of the motorcycle body The structural layout supports controlled impact absorption and component safeguarding. Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: TVS Ronin• Tube Diameter: 22.2 mm• Wall Thickness: 2 mm• Material: Cold Rolled Mild Steel• Fasteners: Stainless Steel 304• Sliders: 2 (left & right)

Read more less

Moto Torque Saddle Stay for TVS Ronin (Compatible Till 2024 Models) The Moto Torque TVS Ronin Saddle Stay is designed specifically for the TVS Ronin to provide structured support for saddlebags while riding. Built to enhance luggage stability and rider safety, this saddle stay prevents bags from touching moving parts of the motorcycle. Engineered for precision fitment, it allows secure mounting of saddlebags while maintaining balance and structural integrity during daily commuting or touring. Designed for TVS Ronin • Compatible with TVS Ronin models till 2024• Model-specific precision fitment• Designed to support saddlebags securely• Prevents contact with moving parts Functional Features • Allows easy mounting of saddlebags• Enhances riding safety during luggage use• Designed for structured load support Material & Construction • Stainless Steel 304 grade nuts and bolts• MIG welding technology for strong joint connection• Grid blasting before powder coating for uniform finish The construction process ensures durability and structural strength. Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Compatibility Note • Compatible with TVS Ronin models till 2024 Specifications • Brand: Moto Torque• Compatibility: TVS Ronin (Till 2024 Models)• Type: Saddle Stay• Fasteners: Stainless Steel 304

Read more less

The Vento Riding Jacket (Cyber Neon Green) is built for riders who prioritize safety without compromising on comfort. Designed for city traffic, highway rides, and cross-country adventures, this riding jacket combines impact resistance, ventilation, and high visibility in a balanced all-day riding solution. Tailored for confident riding, the Vento jacket integrates protective armor, abrasion-resistant materials, and airflow-focused construction. It delivers structured protection while maintaining mobility and comfort across varied riding conditions. Impact Protection Safety forms the core of the Vento Riding Jacket. • CE Level 2 protectors from YF Padding (shoulders, elbows, back)• High-density foam chest protector for front-body impact absorption This protective configuration is designed to absorb impact energy in critical zones, offering reinforced coverage during riding. Abrasion Resistance & Build Quality The jacket uses materials selected for durability and performance under road exposure. • 600D abrasion-resistant polyester shell for slide protection• 3D cool mesh (100% polyester) for superior airflow• Neoprene panels at collar and cuffs to prevent irritation on long rides The 600D polyester shell enhances surface durability, while mesh panels improve ventilation to support comfort in warm conditions. Enhanced Visibility Visibility is essential for safer riding, especially in low-light environments. • 3M reflective trims on arms and back for enhanced night-time visibility• Fluorescent trims across arms, chest, and back for standout daytime presence The Cyber Neon Green detailing increases visual prominence both day and night, improving rider visibility in traffic conditions. Fit & Comfort The Vento jacket is designed to support mobility and adjustable comfort. • Girth adjusters on waist, biceps, arms, and cuffs for a secure fit• Neoprene lining at key contact points for added comfort The adjustable structure allows riders to tailor the fit according to riding posture and personal preference. Storage & Practical Features Functionality is integrated for daily convenience. • 2 exterior side pockets• Internal stash pocket• Mobile & wallet compartments• Organized layout for quick access to essentials This layout ensures that riders can securely carry personal items without bulk.

Read more less

The Moto Torque Vento Riding Jacket (KTM Orange) is built for riders who demand structured protection, ventilation, and high visibility without sacrificing comfort. Designed for city traffic, highway cruising, and cross-country touring, this jacket integrates impact protection, abrasion resistance, and airflow-focused construction into a balanced all-day riding solution. With bold KTM Orange accents, this variant enhances road presence while maintaining a performance-oriented look. The jacket is engineered to support confident riding across varying conditions while preserving mobility and ergonomic comfort. Impact Protection The Vento Riding Jacket incorporates protective armor in key impact zones. • CE Level 2 protectors from YF Padding (shoulders, elbows, back)• High-density foam chest protector for front-body impact absorption These protective elements reinforce critical areas while allowing natural riding movement. Abrasion Resistance & Build Quality Durability and ventilation are integrated into the structure. • 600D abrasion-resistant polyester shell for slide protection• 3D cool mesh (100% polyester) for superior airflow• Neoprene panels at collar and cuffs to prevent irritation on long rides The abrasion-resistant outer layer enhances surface durability, while the mesh construction promotes airflow for improved comfort in warm conditions. Enhanced Visibility Visibility enhancements support safer riding in varying light conditions. • 3M reflective trims on arms and back for enhanced night-time visibility• Fluorescent trims across arms, chest, and back for improved daytime visibility The KTM Orange detailing strengthens visual presence while maintaining safety-focused design. Fit & Comfort Adjustable components ensure personalized comfort and secure fit. • Girth adjusters on waist, biceps, arms, and cuffs for a precise fit• Neoprene lining at key contact points for added comfort These features help maintain riding posture comfort during long hours on the road. Storage & Practical Features Functional storage compartments are built into the jacket. • 2 exterior side pockets• Internal stash pocket• Mobile & wallet compartments• Organized layout for quick access to essentials The pocket layout supports everyday convenience without adding unnecessary bulk.

Read more less

The Vento Riding Jacket (Raging Red) is designed for riders who demand structured protection, ventilation, and high visibility without compromising on comfort. Built for city traffic, highway stretches, and cross-country rides, this jacket blends impact protection with airflow and ergonomic adjustability to support confident, all-day riding. Engineered for real-world conditions, the Vento jacket integrates CE-certified armor, abrasion-resistant construction, and rider-focused comfort detailing. The Raging Red accents enhance road presence while maintaining a performance-oriented aesthetic. Impact Protection Protection is integrated into key impact zones to support rider safety. • CE Level 2 protectors from YF Padding (shoulders, elbows, back)• High-density foam chest protector for front-body impact absorption These protective components reinforce critical areas while allowing natural riding movement. Abrasion Resistance & Build Quality The jacket is constructed using materials selected for durability and ventilation. • 600D abrasion-resistant polyester shell for slide protection• 3D cool mesh (100% polyester) for superior airflow• Neoprene panels at collar and cuffs to prevent irritation on long rides The abrasion-resistant shell supports durability, while the mesh construction promotes airflow in warmer riding conditions. Enhanced Visibility Visibility enhancements improve rider presence in varying light conditions. • 3M reflective trims on arms and back for enhanced night-time visibility• Fluorescent trims across arms, chest, and back for improved daytime visibility The Raging Red detailing adds a bold visual identity while supporting safety. Fit & Comfort The Vento jacket includes adjustable elements to support personalized fit. • Girth adjusters on waist, biceps, arms, and cuffs for a secure fit• Neoprene lining at key contact points for added comfort These features help maintain riding posture comfort during extended journeys. Storage & Practical Features The jacket integrates practical storage for daily riding needs. • 2 exterior side pockets• Internal stash pocket• Mobile & wallet compartments• Organized layout for quick access to essentials The structured storage layout supports convenience without adding bulk.

Read more less

The Vento Riding Jacket (White) is built for riders who prioritize safety without compromising comfort. Designed for city commuting, highway cruising, and long-distance touring, this riding jacket combines structured protection, ventilation, and enhanced visibility in a balanced all-day riding solution. Engineered for confident riding across varying conditions, the Vento jacket integrates impact protection, abrasion-resistant materials, airflow-focused construction, and adjustable fit features. It is tailored to support riders who demand durability and performance while maintaining comfort throughout extended rides. Impact Protection The Vento Riding Jacket is equipped with protective armor in key impact zones. • CE Level 2 protectors from YF Padding (shoulders, elbows, back)• High-density foam chest protector for front-body impact absorption These integrated protectors are positioned to reinforce critical areas while preserving mobility during riding. Abrasion Resistance & Build Quality Durability is built into the structure of the jacket. • 600D abrasion-resistant polyester shell for slide protection• 3D cool mesh (100% polyester) for superior airflow• Neoprene panels at collar and cuffs to prevent irritation on long rides The abrasion-resistant outer shell enhances surface durability, while the mesh design supports airflow for improved ventilation in warm riding conditions. Enhanced Visibility Visibility plays an essential role in rider safety. • 3M reflective trims on arms and back for enhanced night-time visibility• Fluorescent trims across arms, chest, and back for standout daytime safety The white detailing enhances road presence and supports improved visibility during both day and night riding scenarios. Fit & Comfort The Vento jacket is designed for adjustable comfort and tailored fit. • Girth adjusters on waist, biceps, arms, and cuffs for a secure fit• Neoprene lining at key contact points for added comfort These features allow riders to customize fit while maintaining flexibility and riding posture comfort. Storage & Practical Features Functional storage is integrated for convenience. • 2 exterior side pockets• Internal stash pocket• Mobile & wallet compartments• Organized layout for quick access to essentials This structured storage layout supports everyday practicality without adding unnecessary bulk.

Read more less