Performance Parts

The NGK BPR5EIX Iridium IX spark plug is the iridium upgrade for a range of older Maruti, Toyota, GM and Fiat petrol cars. It's the NGK-recommended iridium fitment for these engines, a direct OEM-spec replacement. The 0.6mm fine-wire iridium centre electrode fires a tighter, more focused spark than copper, delivering smoother idle, cleaner combustion, and better cold starts. Iridium holds its gap far longer than a standard plug, keeping ignition consistent and stretching out service intervals. Direct-fit, OEM-spec replacement. No tuning changes — just a sharper, longer-lasting spark. Fitment (NGK-confirmed) Maruti Suzuki: 800, 1000, Zen 1.0, Gypsy 1.3, Omni 0.8 (all carburettor models), Omni 0.8 MPFI Toyota: Qualis General Motors: Astra 1.6i, Corsa 1.6i Fiat: Adventure, Palio 1.6 i.e, Siena 1.6 i.e Not sure if BPR5EIX is your plug? Message us on WhatsApp with your car, variant and year — we'll confirm before you order. Specifications Brand: NGK Part Number: BPR5EIX Type: Iridium IX Spark Plug Centre Electrode: Iridium, 0.6mm fine-wire Sold as: Single plug Key Features NGK-recommended iridium fitment for older Maruti/Toyota/GM/Fiat petrol cars Smoother idle and better cold starts versus a standard plug Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

The NGK BR6HIX Iridium IX spark plug is the iridium fitment for the classic Royal Enfield Bullet STD 350 — the cast-iron-era thumper. It's the NGK-recommended iridium plug for this engine, a direct OEM-spec replacement. The 0.6mm fine-wire iridium centre electrode fires a tighter, more focused spark than copper. On the old long-stroke Bullet that means easier kicks, a steadier thump at idle, and cleaner running — and iridium holds its gap far longer, so you ride more miles between changes. Direct-fit, OEM-spec replacement. No tuning changes — just a sharper, longer-lasting spark for a true classic. Fitment (NGK-confirmed) Royal Enfield: Bullet STD 350 Riding a newer BS6 J-series or UCE 350? Those take different plugs — message us on WhatsApp with your model and year and we'll point you to the right one. Specifications Brand: NGK Part Number: BR6HIX Type: Iridium IX Spark Plug Centre Electrode: Iridium, 0.6mm fine-wire Sold as: Single plug Key Features NGK-recommended iridium fitment for the Bullet STD 350 Easier kick-starts and steadier idle versus a standard plug Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

The NGK DPR8EIX-9 Iridium IX spark plug is the iridium fitment for Hero's Karizma and CBZ family — the 150-225cc enthusiast singles of their era. It's the NGK-recommended iridium plug for these engines, a direct OEM-spec replacement. The 0.6mm fine-wire iridium centre electrode lights a sharper, more focused spark than copper, delivering crisper throttle pickup, smoother running, and dependable starts. Iridium holds the gap far longer, keeping the spark consistent and stretching out service intervals. Direct-fit, OEM-spec replacement. No tuning changes — just a better, longer-lasting spark. Fitment (NGK-confirmed) Hero: Ambition, Karizma, Karizma-ZMR, CBZ-Star, CBZ-Gold Not sure if DPR8EIX-9 is your plug? Message us on WhatsApp with your bike and year — we'll confirm before you order. Specifications Brand: NGK Part Number: DPR8EIX-9 Type: Iridium IX Spark Plug Centre Electrode: Iridium, 0.6mm fine-wire Sold as: Single plug Key Features NGK-recommended iridium fitment for Hero Karizma / CBZ family Sharper spark, crisper throttle pickup Long service life — iridium holds its gap Direct-fit OEM-spec replacement

Read more less

BMC FM995/04 Performance Air FilterOne genuine BMC filter, multiple machines. The BMC FM995/04 is a direct-fit washable performance air filter that fits the Husqvarna Vitpilen 250 (2018+) and Husqvarna Svartpilen 250 (2018+). Engine fitments: 248.7cc.This is a direct replacement for the stock element — it drops into the factory airbox with no cutting or modification. BMC's multi-layer cotton-gauze media delivers freer airflow and crisper throttle response over a disposable paper filter.Why riders choose BMC Washable and reusable — clean, re-oil and refit for the life of the bike. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less

BMC FM964/04 Performance Air Filter for Aprilia SR 150 / SR 160India's sportiest 150-class scooter deserves more than a paper filter.The BMC FM964/04 is a direct-fit washable performance air filter for the Aprilia SR 150 and SR 160. It swaps the stock disposable element for BMC's reusable cotton-gauze media, improving airflow while staying street-friendly.This is a direct-fit replacement — it drops straight into the factory airbox with no cutting, no modification, and no extra hardware. Fits the Aprilia SR 150 and SR 160.Why riders choose BMC Washable and reusable — clean it, re-oil it, refit it. One filter for the life of the scooter. Multi-layer cotton gauze for higher airflow than a stock paper element, without leaving the engine exposed. Made in Italy by BMC, an OEM and motorsport-grade air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less

66BHP Universal Motorcycle Paddock Stand – Stable Lifting. Smarter Maintenance. Built for riders who maintain, clean, detail, or store their motorcycles regularly, the 66BHP Universal 2-in-1 Paddock Stand combines stability, strength, and universal compatibility into one dependable garage essential. Designed with dual support compatibility for both swingarm and spool lifting, this stand eliminates the need for multiple lifting tools and delivers workshop-grade confidence inside your garage. Built using a single CNC-bent steel frame, reinforced axle architecture, and premium powder-coated protection, this paddock stand is engineered for long-term durability and repeated daily use. One Stand. Two Support Modes. The 66BHP Universal Stand supports multiple motorcycle configurations. Swingarm Support Ideal for motorcycles without installed paddock spools. Spool Support Provides precise and secure lifting for motorcycles equipped with spool bobbins. Switch between both setups using the included support hardware. Designed To Lift Smarter Ordinary stands lift. 66BHP focuses on stability, smoother operation, and better load distribution. Key advantages include: Stable rear wheel lifting Smooth rolling movement Improved load balancing Better service accessibility Easier motorcycle maintenance Built To Handle Real Motorcycle Weight Engineered with reinforced axle-mounted support and structural load management. Capacity Highlights Supports motorcycles up to 500 kg Stable during servicing Reduced frame flex Improved weight distribution Suitable for: Sports motorcycles Naked motorcycles Touring motorcycles Adventure motorcycles Street motorcycles Premium Single CNC-Bent Steel Construction Unlike welded multi-piece structures, this paddock stand uses a single CNC-bent steel tube design. Benefits: Improved structural rigidity Cleaner finish Better durability Reduced stress points The 2.5 mm steel frame construction helps maintain long-term lifting stability. Reinforced Wheel System Built for smoother garage movement. Features: Reinforced axle support Stable wheel alignment Controlled positioning Reduced vibration while moving Premium Powder-Coated Finish Finished with protective powder coating for: Better corrosion resistance Long-term appearance retention Improved durability Available in multiple color options to match different motorcycle builds. Built For Every Garage Setup Ideal for: Chain Maintenance Lift rear wheel for easier cleaning and lubrication. Wheel Servicing Simplifies tyre and wheel work. Detailing Studios Makes cleaning and polishing easier. Home Garage Storage Keeps motorcycles organized during storage. Why Riders Upgrade To 66BHP Compared with standard paddock stands: ✓ Dual lifting compatibility✓ Better structural design✓ Reinforced support architecture✓ Premium finish quality✓ Higher load capability✓ Long-term durability support Key Features Universal motorcycle compatibility 2-in-1 support system Swingarm + spool support 500 kg load capacity Single CNC-bent steel frame Reinforced axle design Premium powder-coated finish Smooth rolling operation Stable rear lifting Garage and workshop ready 5-year warranty Package Contents 1 × 66BHP Universal Paddock Stand Swingarm Support Set Spool Support Set Installation Hardware Important Usage Note Ensure motorcycle is balanced before lifting. Use only on flat stable surfaces. Confirm spool compatibility before use. Not intended for transport applications.

Read more less

Fully Adjustable Performance Suspension for Honda CB350 Platform The 66BHP Air Born Performance Suspension is engineered for Honda CB350 and CB350RS, delivering a structured upgrade in ride comfort, stability, and handling precision. Designed for Indian road conditions, this suspension system integrates multiple adjustment parameters and premium internals to provide controlled damping and improved rider confidence across city and highway use. 3-Way Adjustable Suspension System Built for precise tuning across riding conditions: Rebound adjustment controls return speed after compression Compression adjustment manages bump absorption Spring preload adjustment fine-tunes ride height and load balance This allows customization based on rider weight, luggage, and terrain. Progressive Spring Configuration The suspension uses a progressive rate spring setup: Balanced response for daily riding and touring Optional soft spring configuration available for lighter riders or rough roads Designed to maintain comfort while supporting varying loads. Tunable Performance Parameters Fine-tuning capability ensures adaptable ride quality: Rebound Adjustment: 24 clicks Compression Adjustment: 18 clicks Spring Preload Adjustment: 0–35 mm Spring Rate: K1 – 22.4 N/mm Factory settings are provided, with flexibility for further tuning. Built for Long-Term Use Designed as a serviceable suspension system: Rebuildable internals for extended lifespan Maintains damping performance over time Serviceable components including seals and internal parts Real-World Riding Advantages Optimized for everyday and performance riding: Improved braking stability Reduced rear-end wallow and instability Better absorption over uneven road conditions Increased confidence at higher speeds

Read more less

High-Performance Braking Upgrade for Speed 400 & Scrambler 400 X The 66BHP Race Pro Sintered Brake Pads are engineered for riders who demand stronger stopping power, sharper bite, and consistent braking under high load conditions. Built for performance-focused riding, these pads deliver increased braking authority when speed, road conditions, and riding intensity rise. Sintered Compound Performance The Race Pro pads use a sintered compound designed for higher braking demands: Aggressive initial bite for stronger stopping response Designed for performance-oriented riding conditions Maintains braking consistency under load This setup is tuned for riders who want more than standard braking feel. High Heat Resistance Developed to handle repeated braking pressure: Resists heat buildup during aggressive riding Maintains braking performance under sustained use Suitable for high-speed and highway conditions Fade-Resistant Braking Built to deliver dependable braking even under stress: Reduced performance drop during prolonged braking Consistent braking feel on descents and repeated stops Maintains control in demanding scenarios Wet and All-Weather Confidence Designed for variable riding environments: Stable braking response in wet conditions Reliable performance across changing road surfaces Improved rider confidence in unpredictable conditions Built for Performance Riding Race Pro is tuned for riders pushing beyond everyday limits: Stronger braking authority at higher speeds More control during aggressive riding Suitable for highway, touring, and spirited riding

Read more less

Controlled Braking Upgrade for Guerrilla 450 The 66BHP Street Pro Semi Ceramic Brake Pads are developed for the Royal Enfield Guerrilla 450, delivering a noticeable upgrade in braking feel, consistency, and control over standard replacement pads. Built for real-world riding, these pads focus on predictable braking performance across city traffic, highway speeds, and changing weather conditions. Semi-Ceramic Compound Setup The Street Pro pads use a semi-ceramic compound designed for balanced braking: Stronger initial bite compared to basic pads Smoother lever response during braking Controlled performance without aggressive characteristics This ensures a refined braking feel suited for everyday riding. Consistent Performance in All Conditions Engineered to maintain stable braking response across environments: Dependable braking in wet and dry conditions Improved confidence during sudden braking Predictable braking feel across different road surfaces Low Dust and Clean Operation Designed to reduce common braking issues: Low dust formula helps keep wheels cleaner Reduced residue buildup over time Cleaner braking performance for daily use Low Noise Braking Focused on smoother operation: Reduced noise during braking More refined braking feel Suitable for regular commuting and touring Built for Everyday Riding The Street Pro range is tuned for versatility: Effective in city traffic and stop-go conditions Stable during highway riding Suitable for daily use and weekend rides

Read more less

Built for the Bear 650 Twin Engine The Barrel B-20 Bass Master Exhaust is engineered specifically for the Royal Enfield Bear 650 platform. This is not just a slip-on—it’s a performance-focused system with a decat pipe designed to unlock the full breathing potential of the 650 twin engine. 🔊 Signature Bass Master Sound Deep, bass-heavy exhaust tone Strong low-frequency thump No sharp or raspy noise This is tuned for authority, not noise pollution. ⚙️ Decat Performance Advantage Unlike standard slip-ons, this setup includes a decat pipe: Frees up exhaust flow Reduces back pressure Improves engine breathing Enhances throttle response Result → smoother, more responsive acceleration ⚡ Performance Gains You Can Feel Noticeably sharper throttle response Improved torque delivery More engaging riding experience No unnecessary tuning complexity—just real-world gains. 🪶 Weight Reduction & Build Quality Saves approx 1.5–5.5 kg vs stock Constructed from 304 Stainless Steel High durability + corrosion resistance 🛠️ Plug & Play Fitment Direct bolt-on installation (OEM mounts) No cutting or welding required Installation time: ~30–45 minutes 🔧 DB Killer Control Comes with removable DB killer Tune sound based on preference: With DB killer → controlled Without → full bass roar 📦 What’s in the Box B-20 Bass Master Exhaust Decat Pipe DB Killer Mounting Hardware ✅ Compatibility Royal Enfield Bear 650 ⚠️ Important Notes This is a performance exhaust with decat pipe May not comply with emission or noise regulations in all regions ECU remap is not mandatory, but can help extract optimal performance Sound output will be significantly louder than stock 🛡️ Warranty Manufacturer Warranty: Lifetime rust warranty 1-year weld warranty RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, please refer to our warranty policy.

Read more less

Vesrah SD-360 Front Ceramic Brake Pads for Aprilia SR Scooters Product Description The Vesrah SD-360 Front Ceramic Brake Pads are designed for Aprilia scooters that use the SD-360 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver stable braking performance and reduced brake dust. The Vesrah SD-360 front brake pads are built as a direct replacement pad set compatible with the Aprilia SR150 and Aprilia SR125 scooters. The ceramic compound construction is designed to provide smooth braking response, controlled stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response during regular riding conditions. The pad compound interacts with the brake rotor to deliver reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their Aprilia scooter, the Vesrah SD-360 ceramic front brake pads provide a direct-fit replacement designed for daily commuting and city riding. Compatible Vehicles (Front Brake) Aprilia SR150Aprilia SR125 Specifications Brand: VesrahPad Code: SD-360Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-360 Front Ceramic Brake Pads for Yezdi Roadster and Adventure Product Description The Vesrah SD-360 Front Ceramic Brake Pads are designed for Yezdi motorcycles that use the SD-360 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver smooth braking response and reduced brake dust. The Vesrah SD-360 front brake pads are built as a direct replacement pad set compatible with the Yezdi Roadster and Yezdi Adventure. The ceramic compound construction is designed to provide controlled braking feel, stable stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response during regular riding conditions. The pad compound interacts with the brake rotor to provide reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their Yezdi motorcycle, the Vesrah SD-360 ceramic front brake pads provide a direct-fit replacement designed for daily riding and regular commuting. Warranty Disclaimer This product includes manufacturer warranty coverage if provided by Vesrah. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Compatible Motorcycles (Front Brake) Yezdi RoadsterYezdi Adventure Specifications Brand: VesrahPad Code: SD-360Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Triumph Motorcycles Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for Triumph motorcycles that use the SD-953 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to provide smooth braking response and consistent stopping performance. The Vesrah SD-953 rear brake pads are built as a direct replacement brake pad set compatible with motorcycles such as the Triumph Speed 400, Scrambler 400, and Street Triple 675. The ceramic compound construction is designed to deliver stable braking feel, controlled stopping power, and reliable performance during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain steady braking performance across various riding conditions. The pad compound works with the brake rotor to provide consistent braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their Triumph motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement designed for street riding and regular commuting. Compatible Motorcycles (Rear Brake) Triumph Street Triple 675Triumph Street Triple 675 RTriumph Speed 400Triumph Scrambler 400Triumph Tiger 400 Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Moto Torque Stage II Air Filter Combo Kit for Interceptor 650, Continental GT 650 & Bear 650 The Moto Torque Air Filter Stage II Combo Kit is designed exclusively for Royal Enfield Interceptor 650, Continental GT 650, and Bear 650 motorcycles. This combo package integrates the Moto Torque Performance Air Filter with the Stage II upgrade kit to deliver enhanced airflow, sharper throttle response, and smoother acceleration. Engineered specifically for the Royal Enfield 650 twin-cylinder platform, this kit is built to improve intake efficiency while maintaining durability and precision fitment. Designed for Royal Enfield 650 Twin Platform • Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Bear 650• Precision engineered for RE 650 twin-cylinder engines Model-specific compatibility ensures correct alignment and plug-and-play installation. Complete Performance Package • Includes Performance Air Filter• Includes Stage II upgrade kit• Integrated high-flow intake solution This bundled system is structured to optimize airflow while supporting consistent engine performance. Engineered Features Stainless Steel ConstructionCorrosion-resistant structure built for long-term durability. Enhanced AirflowImproved intake efficiency supports stronger and smoother power delivery. Precision FitDesigned specifically for Royal Enfield 650 twins and Bear 650 platform. Easy InstallationPlug-and-play design for straightforward installation. Performance Benefits • Sharper throttle response• Smoother acceleration• Optimized airflow delivery• Long-lasting structural durability Designed to complement the performance characteristics of the 650cc twin engine. Specifications • Brand: Moto Torque• Product Type: Stage II Air Filter Combo Kit• Compatibility: Interceptor 650 / Continental GT 650 / Bear 650• Construction: Stainless Steel + High-flow Filter• Installation: Plug-and-Play

Read more less

Barrel Rogue Slip-On Exhaust for KTM Duke 250/390, RC 390 & Adventure 390 – Stainless Steel (Rogue 1.0 & 2.0) The Barrel Rogue Exhaust for KTM Duke 250, Duke 390, RC 390 and Adventure 390 is a stainless steel slip-on exhaust system designed as a direct rear-section replacement. This listing covers both Rogue 1.0 and Rogue 2.0 styles with model-specific fitment options via the variant dropdown. This exhaust replaces the stock rear canister and includes a compatible link pipe matched to your selected model. It modifies the visual profile and acoustic output while retaining the original header system. Compatible KTM Models — Select Correct Variant KTM Duke 250 KTM Duke 390 BS4 KTM Duke 390 BS6 KTM RC 390 BS4 KTM RC 390 BS6 KTM Adventure 390 Fitment depends on selecting the correct variant. Confirm your model and BS4 / BS6 configuration before ordering. Not compatible with KTM models equipped with factory underbelly exhaust systems. Rogue 1.0 vs Rogue 2.0 Rogue 1.0 Compact canister design with shorter rear profile Sharper, more aggressive exhaust character Stainless steel, black finish Rogue 2.0 Revised canister geometry with altered internal acoustic tuning Fuller, deeper exhaust tone Stainless steel, black finish Construction & Materials Built from stainless steel — durable, corrosion-resistant, handles repeated heat cycles and daily exposure. Includes a model-specific link pipe connecting the canister to the existing mid-section. Slip-on configuration — rear muffler replacement only, original header stays. Sound & Performance By modifying the internal chamber and exhaust flow path, the Rogue produces a more pronounced tone compared to stock. Sound intensity varies by model, fuel mapping, catalytic configuration, and DB killer setting. Comes with a removable DB killer for sound adjustment. As a slip-on, this primarily affects acoustics and rear-end weight. Any perceived change in throttle response varies by overall bike configuration. Does not include ECU remapping or fuel controllers — arrange tuning separately if required. Compliance with local noise regulations is the owner's responsibility. Installation Remove factory exhaust canister Connect supplied link pipe Mount the Rogue canister and secure hardware to torque spec Check alignment and exhaust sealing Professional installation recommended. No permanent engine modification required. What's in the Box Rogue Exhaust Canister (1.0 or 2.0 as selected) Model-specific link pipe Mounting hardware Removable DB killer Specifications Brand: Barrel Exhaust Type: Slip-On Exhaust Material: Stainless Steel Finish: Black Styles: Rogue 1.0 / Rogue 2.0 Fitment: KTM Duke 250, Duke 390 BS4/BS6, RC 390 BS4/BS6, Adventure 390

Read more less

The NGage HB 164 and HBS 164 front brake pads are disc brake pads developed for the front brake caliper used on the Triumph T4. These brake pads are manufactured to match the exact pad shape, mounting profile, and contact surface geometry required by the front braking system fitted to this motorcycle, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the front brake position. The rear brake pads for the Triumph T4 use a different pad code and are listed separately. Front brake pads carry the primary braking load on a motorcycle. The majority of stopping force is generated at the front wheel, making the quality and behavior of the front brake pads a key factor in braking confidence, lever feel, and controlled deceleration. A front brake pad must deliver predictable bite, stable friction output, and consistent performance across varying temperatures and braking loads. NGage offers the HB 164 front brake pad shape in two friction material variants: Whisker Ceramic (HB 164) and Sintered (HBS 164). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and how it behaves under heat, load, and repeated braking cycles. Whisker Ceramic Variant — HB 164 The HB 164 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver smooth initial bite, progressive braking force buildup, and stable friction output during everyday riding conditions. The ceramic matrix allows controlled modulation at the brake lever, which is particularly useful for urban riding, highway cruising, and mixed riding environments where precise braking control is preferred. The whisker reinforcement improves structural stability within the friction layer, helping the pad maintain consistent surface behavior under repeated braking cycles. This compound is intended for riders who prioritize refined braking feel, predictable front brake response, and consistent deceleration without aggressive bite characteristics. Sintered Variant — HBS 164 The HBS 164 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, wear-resistant friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, extended downhill descents, and high-speed riding. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake heat buildup is significant. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher front brake temperatures. Fitment & Compatibility This listing applies to the front brake position on the following motorcycle: Compatibility (Front Brake Only)Triumph T4 The HB 164 and HBS 164 pad shape is specific to the front caliper used on the Triumph T4. Rear brake pads use a different pad code and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 164 — Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responseProgressive front brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 164 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 164 (Whisker Ceramic), HBS 164 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Front brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock front brake pads• No modification required for compatible models• Install only in the front brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 150–200 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

NGage HB 155 / HBS 155 Rear Brake Pads for Royal Enfield Super Meteor 650 & Shotgun 650 – Ceramic & Sintered Options (Rear Only) The NGage HB 155 and HBS 155 rear brake pads are disc brake pads designed for Royal Enfield motorcycles that use this exact pad shape and mounting specification at the rear brake caliper. These brake pads are specified for the Royal Enfield Super Meteor 650 and Royal Enfield Shotgun 650 in the rear brake position. Both motorcycles share the same rear brake pad format, allowing a single pad code to be used across both models. This listing covers the rear brake pad set only for these two motorcycles. Brake Pad Function & Fitment Logic Brake pads are a core wear component in a motorcycle’s braking system. Their role is to generate friction against the brake disc when hydraulic pressure is applied through the brake caliper. For proper braking behavior, brake pads must match the exact backing plate shape, thickness, and mounting profile specified for the brake caliper design used on the motorcycle. NGage brake pad codes define this physical geometry. Only pads with the correct code should be installed in a given caliper. For the motorcycles covered under this listing: HB 155 represents the Whisker Ceramic variant HBS 155 represents the Sintered variant Both variants share identical dimensions and mounting features. The only difference between the two is the friction material composition. Using the correct pad code is essential. Installing pads with a different shape or specification can lead to improper seating, uneven pad wear, brake noise, inconsistent braking response, or long-term damage to braking components. Variant Explanation This product is available in two NGage material variants: HB 155 – Whisker Ceramic Brake PadsThis variant uses a ceramic-based friction compound reinforced with whisker fibers. It is classified by NGage as a Whisker Ceramic brake pad. The compound is designed to provide stable braking behavior and consistent friction characteristics under standard road riding conditions. HBS 155 – Sintered Brake PadsThis variant uses a metallic sintered friction compound. It is classified by NGage as a Sintered brake pad. Sintered pads are manufactured using fused metallic powders and are typically selected where higher thermal stability and consistent braking behavior under sustained load are required. Both variants are identical in shape, fitment, and mounting dimensions.Only the friction material composition differs between HB and HBS variants. Intended Application The NGage HB 155 and HBS 155 rear brake pads are direct-replacement components for the rear brake calipers used on the Royal Enfield Super Meteor 650 and Royal Enfield Shotgun 650. These brake pads are not universal and are not interchangeable with other NGage pad codes such as HB 163, HB 164, or HB 184. They are intended strictly for motorcycles that specify pad code HB 155 or HBS 155 at the rear. Installation & Service Considerations Brake pads are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals or when pad thickness reaches the wear limit. Installation should follow standard brake service procedures, including: Cleaning the brake caliper and pad guide surfaces Inspecting the brake disc for wear or scoring Seating the pads correctly within the caliper Tightening mounting hardware to the correct torque Performing a bed-in procedure after installation Improper installation can result in brake noise, uneven wear, or inconsistent braking response. Professional installation is recommended for riders who are not familiar with motorcycle brake system service procedures. Summary The NGage HB 155 and HBS 155 rear brake pads are direct-replacement brake pads designed for Royal Enfield 650cc motorcycles that use this exact rear pad format. Available in Whisker Ceramic and Sintered variants, these pads provide two friction material options while maintaining identical fitment geometry. Correct specification matching and proper installation are essential prior to use. Compatibility (Rear Only) Royal Enfield Super Meteor 650 Royal Enfield Shotgun 650 Variant Explanation Whisker Ceramic (HB 155): Ceramic-based friction compound Sintered (HBS 155): Metallic sintered friction compound Both variants share identical fitment and mounting dimensions Specifications Brand: NGage Product Type: Motorcycle brake pads Position: Rear Pad Codes: HB 155 (Whisker Ceramic), HBS 155 (Sintered) Compatibility: Royal Enfield Super Meteor 650, Royal Enfield Shotgun 650 Certification Marking: ARAI Tested Manufacturing Origin: Japan Installation / Usage Notes Install only in the rear brake caliper position Use only the specified pad code for your motorcycle Perform bed-in procedure after installation Professional installation recommended

Read more less

NGage HB 164 / HBS 164 Front Brake Pads for Royal Enfield 450 & 650 Models – Ceramic & Sintered Options (Front Only) The NGage HB 164 / HBS 164 Front Brake Pads are precision-engineered front brake replacement pads designed specifically for select Royal Enfield motorcycles that use the HB 164 pad profile in the front brake caliper. These pads are manufactured in Japan and are listed in NGage’s official compatibility chart for exact-fit installation. This listing applies strictly to front brake fitment only. It does not cover rear brake pads. Brake pad shape accuracy is critical. The HB 164 platform is used across multiple Royal Enfield 450 and 650 motorcycles, and installing the correct pad ensures proper caliper seating, even pad wear, and consistent braking response. Both variants offered here share identical mounting dimensions and backing plate design. The only difference lies in the friction material compound. Compatibility (Front Brake Only) As per NGage’s official application chart, this pad profile is compatible with: Royal Enfield Himalayan 450 Royal Enfield Guerrilla 450 Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 Royal Enfield Super Meteor 650 Royal Enfield Shotgun 650 These models use the HB 164 front pad specification. Buyers should confirm fitment before installation, especially when upgrading between ceramic and sintered variants. Variant Explanation – HB vs HBS This product is available in two NGage friction material options: HB 164 – Whisker Ceramic Brake Pads The HB 164 uses NGage’s Whisker Ceramic compound. This is a ceramic-based friction formulation designed for smooth bite progression and reduced brake noise. It is suitable for: Daily commuting Highway touring Urban riding Riders who prefer controlled lever feedback Ceramic pads are typically chosen for quieter braking and progressive modulation under standard operating temperatures. HBS 164 – Sintered Brake Pads The HBS 164 uses a sintered metallic friction compound. This version is engineered for higher thermal resistance and sustained braking under load. It is suitable for: Aggressive riding Mountain descents Heavier motorcycles with luggage Riders seeking firmer braking response Sintered compounds generally maintain braking consistency across wider temperature variations. Both versions are ARAI tested and manufactured in Japan. Only the friction compound differs. Shape, dimensions, and installation procedure remain the same. Performance Characteristics Brake pads influence more than stopping distance. They affect lever feel, fade resistance, disc wear patterns, and braking stability under repeated deceleration. The NGage HB 164 / HBS 164 Front Brake Pads are engineered to deliver: Stable braking response Consistent contact with the brake disc Predictable lever modulation Uniform wear across the friction surface Performance can vary depending on riding style, road conditions, brake disc condition, and bedding-in procedure. Material & Construction Overview Both variants use a precision-formed backing plate engineered to match the Royal Enfield front caliper design. Proper plate rigidity ensures even pressure distribution across the friction surface. The friction compound is bonded using controlled manufacturing processes designed to withstand heat cycles generated during braking. NGage does not publish internal compound percentages or heat range values beyond the ceramic and sintered classification. The product is listed as ARAI tested, indicating it has undergone evaluation under Indian regulatory standards. Installation & Bedding-In Installation should be performed only on the front brake caliper of the compatible models listed above. After installation, a proper bedding-in procedure is strongly recommended. Bedding-in allows the friction material to transfer evenly onto the brake disc surface, helping establish consistent braking behaviour. Failure to bed in new pads correctly may lead to uneven wear or inconsistent lever feel. Professional installation is advised for riders unfamiliar with brake servicing procedures. What’s Included 1 × Set of NGage Front Brake Pads(HB 164 – Whisker Ceramic or HBS 164 – Sintered, depending on selected variant) No additional mounting pins, shims, springs, or hardware are included unless shown in product images. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 164 (Whisker Ceramic) / HBS 164 (Sintered)Compatibility: Royal Enfield 450 & 650 models listed aboveCertification: ARAI TestedCountry of Manufacture: JapanFitment Type: Direct replacement

Read more less

NGage Hyper Flow Air Filter (NGAGE-022XPUL210) for Hero X-Pulse 210 4V (2025 Onwards) – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-022XPUL210) is a reusable, washable cotton-gauze air filter developed specifically for the Hero X-Pulse 210 4V platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Hero X-Pulse 210 4V (2025 onwards). As stated on the official NGage product artwork, this air filter is compatible with the following motorcycle: Hero X-Pulse 210 4V (2025 onwards) This listing covers this model exactly as specified by the manufacturer. Designed for Hero X-Pulse 210 4V (2025 Onwards) NGage specifies this Hyper Flow Air Filter for the Hero X-Pulse 210 4V platform introduced for the 2025 model year. From the NGage product artwork: Fits: Hero X-Pulse 210 – 4V (2025 onwards) The filter is engineered to fit directly into the factory airbox of the above motorcycle without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-022XPUL210 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded rectangular filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance  As per NGage’s official product artwork and feature icons, the NGage Hyper Flow Air Filter NGAGE-022XPUL210 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.8 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-022XPUL210: Hero X-Pulse 210 4V (2025 onwards) Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-022XPUL210 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-022XPUL210 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Hero X-Pulse 210 4V (2025 onwards) Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.8 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Hero X-Pulse 210 4V (2025 onwards) motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-019TRI400) for Triumph Speed 400, Scrambler 400X & T4 – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-019TRI400) is a reusable, washable cotton-gauze air filter developed specifically for Triumph motorcycles built on the 400 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Triumph Speed 400, Triumph Scrambler 400X, and Triumph T4. As stated on the official NGage product artwork, this air filter is compatible with the following motorcycles: Triumph Speed 400 Triumph Scrambler 400X Triumph T4 This listing covers these three models exactly as specified by the manufacturer. Designed for Triumph Speed 400, Scrambler 400X & T4 NGage specifies this Hyper Flow Air Filter for Triumph motorcycles built on the 400 cc platform. From the NGage product artwork: Fits: Speed 400 Scrambler 400X T4 The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-019TRI400 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded cylindrical filter body to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and feature icons, the NGage Hyper Flow Air Filter NGAGE-019TRI400 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the NGage product artwork and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-019TRI400: Triumph Speed 400 Triumph Scrambler 400X Triumph T4 Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-019TRI400 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-019TRI400 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Triumph Speed 400, Triumph Scrambler 400X, Triumph T4 Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Triumph Speed 400, Scrambler 400X, and T4 motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-007-JAWA500) for Jawa Classic, Forty Two & Yezdi Roadster – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-007-JAWA500) is a reusable, washable cotton-gauze air filter developed for motorcycles built on the Jawa–Yezdi 300–334 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Jawa Classic, Jawa Forty Two, and Yezdi Roadster. As stated on NGage’s official product page and compatibility panel, this air filter is specified for the following motorcycles: Jawa Classic Jawa Forty Two Yezdi Roadster This listing covers these three models exactly as specified by the manufacturer. Designed for Jawa Classic, Forty Two & Yezdi Roadster NGage specifies this Hyper Flow Air Filter for motorcycles built on the Jawa–Yezdi platform. From the NGage product page: Suitable For: Jawa Classic Jawa Forty Two Yezdi Roadster The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring any cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-007-JAWA500 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product page and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product material and feature icons, the NGage Hyper Flow Air Filter NGAGE-007-JAWA500 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter No horsepower or torque increase figure is shown for this specific model on the NGage product page or artwork. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product page: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product page and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage product page. Warranty Information (Manufacturer-Stated) From the NGage product page and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per NGage’s official product page and compatibility panel for part number NGAGE-007-JAWA500: Jawa Classic Jawa Forty Two Yezdi Roadster Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-007-JAWA500 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications (Manufacturer-Verified Only) Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-007-JAWA500 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Jawa Classic, Jawa Forty Two, Yezdi Roadster Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Jawa Classic, Jawa Forty Two, and Yezdi Roadster motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage B8RII-8 Double Iridium Spark Plug for Suzuki V-Strom 250 & Burgman 125 (BS4 / BS6 Compatible) The NGage B8RII-8 Double Iridium Spark Plug is a precision ignition component developed for select Suzuki motorcycles, including the Suzuki V-Strom 250 and Suzuki Burgman 125. Manufactured in Japan, this spark plug is part of NGage’s Double Iridium series and is specified for use in both BS4 and BS6 compliant motorcycles, as stated by the manufacturer. This listing focuses exclusively on its application for Suzuki motorcycles where the B8RII-8 spark plug specification is listed by NGage in its official compatibility chart. It is intended as a direct replacement spark plug for these motorcycles, without modification. Designed for Suzuki Motorcycles NGage specifies the B8RII-8 spark plug for a defined group of Suzuki motorcycles that share compatible ignition system requirements. The following Suzuki models are listed by NGage for use with the B8RII-8 spark plug: Suzuki V-Strom 250 Suzuki Burgman 125 These motorcycles represent two distinct riding formats within Suzuki’s lineup: a lightweight adventure-touring platform and a fuel-injected urban scooter platform. Despite differences in displacement and application, NGage lists the same B8RII-8 spark plug specification for both models, indicating alignment with their respective ignition system design and operating parameters. For both motorcycles, the B8RII-8 is intended to function as a like-for-like replacement for the factory-specified spark plug type. It is not positioned as a tuning component or a modification-driven upgrade, but as a specification-correct ignition part for routine service or replacement. Double Iridium Spark Plug Construction NGage classifies the B8RII-8 as a Double Iridium spark plug, meaning iridium material is used on both the center electrode and the ground electrode. Iridium is used in modern spark plug construction due to its high melting point and resistance to electrode erosion during repeated ignition cycles. This construction approach is commonly applied in motorcycles with high-energy ignition systems and tightly controlled combustion environments. The double-iridium configuration is intended to maintain consistent electrode geometry over extended operating periods under normal riding conditions. NGage does not publish electrode dimensions, spark-gap values, heat-range explanations, or service-interval figures for this model. BS4 and BS6 Compatibility NGage specifies that the B8RII-8 spark plug is compatible with both BS4 and BS6 vehicles. This makes it suitable for use across production years that fall before and after the BS6 emission-standard transition, provided the motorcycle is included in the compatibility list. For the Suzuki V-Strom 250 and Suzuki Burgman 125, this ensures suitability across emission-compliant variants without requiring a change in spark plug specification. No emission-reduction, fuel-efficiency, or tuning claims are made for this product. Manufacturing Origin The B8RII-8 spark plug is manufactured in Japan, as stated by NGage. NGage does not publish further information regarding production processes, certifications, or testing standards for this model. The country of manufacture is provided here as factual product information only. Intended Use The NGage B8RII-8 is intended for routine replacement during scheduled maintenance or spark-plug service intervals recommended by Suzuki. It is suitable for everyday road use on the Suzuki V-Strom 250 and Suzuki Burgman 125 within standard operating conditions. This spark plug is not positioned by NGage as a racing-only, track-specific, or specialized tuning component. Fitment Accuracy Correct spark plug selection is critical for engine operation and long-term reliability. The B8RII-8 should be installed only on motorcycles listed in the compatibility section below. Use on non-listed motorcycles is not recommended. Compatibility As per NGage official compatibility chart for part number B8RII-8: Suzuki Motorcycles Suzuki V-Strom 250 Suzuki Burgman 125 Variant Explanation This listing is for NGage B8RII-8 Double Iridium Spark Plug only. “Double Iridium” refers to iridium usage on both the center and ground electrodes. This part number represents a single manufacturer-defined specification. No alternate heat ranges or material variants are included in this listing. Specifications (Only Verified Data) Brand: NGage Part Number: B8RII-8 Spark Plug Type: Double Iridium Vehicle Compatibility: BS4 & BS6 Country of Manufacture: Japan Application: Motorcycle spark plug Installation / Usage Notes Install only on Suzuki motorcycles listed in the compatibility section. Follow Suzuki service-manual torque specifications and standard spark-plug installation procedure. Install on a cold engine.

Read more less

NGage Whisker Sintered Front Brake Pad (HBS184) — KTM Duke / RC / Adventure 125–390 The NGage Whisker Sintered Front Brake Pad is engineered for KTM Duke, RC, and select Adventure motorcycles where the HBS184 front pad code is specified. Sintered metallic compound — higher friction coefficient, heat-resistant, built for riders who demand more bite and durability than ceramic. Technical Specifications Brand NGage Powerparts Series Whisker Sintered Pad Position Front Pad Code HBS184 Compound Sintered metallic Friction Coefficient ~0.55 – 0.65 Thermal Rating Up to ~1000°C Est. Service Life 12,000 – 18,000 km Supplied As Front pad set (one wheel) Sintered Compound Construction Manufactured by fusing metallic powders under high heat and pressure — creating a dense compound that maintains braking effectiveness across repeated heat cycles. Compound includes: Copper (heat dissipation), Steel/Iron (wear resistance), Brass (corrosion resistance), Graphite (high-temp lubrication), Carbon fibres, Molybdenum Disulfide MoS2 (solid lubricant under pressure). Stronger initial bite vs ceramic High heat resistance — rated to ~1000°C Consistent friction during repeated braking cycles Suitable for spirited street, highway, and mixed riding Compatibility Front brake position only. Compatible where HBS184 is specified: KTM Duke 125 / 200 / 250 / 390 KTM RC 125 / 200 / 250 / 390 KTM Adventure 250 / 390 (Gen 2) Gen 3 Adventure models use HBS164. See the Gen 3-specific listing. Pad Code Reference Front: HBS184 (this listing) | Rear: HBS163 — sold separately. Installation Notes Bed in pads correctly after installation Inspect disc, caliper, and brake fluid during replacement Professional installation recommended In The Box 1 x NGage Whisker Sintered Front Brake Pad set (HBS184)

Read more less

NGage Whisker Ceramic Front Brake Pad (HB184) — KTM Duke / RC / Adventure 125–390 The NGage Whisker Ceramic Front Brake Pad is engineered for KTM Duke, RC, and select Adventure motorcycles where the HB184 front pad code is specified. Street-focused ceramic compound — predictable bite, smooth modulation, rotor-friendly behaviour. Technical Specifications Brand NGage Powerparts Series Whisker Ceramic Pad Position Front Pad Code HB184 Compound Ceramic with fibre reinforcement Friction Coefficient ~0.45 – 0.60 Supplied As Front pad set (one wheel) Why Ceramic Compound Progressive lever feel — builds braking force smoothly without abrupt grab Stable friction response during repeated stops in city and highway riding Rotor-friendly friction surface — reduced rotor wear vs aggressive metallic compounds Lower brake noise and dust output Whisker fibre reinforcement for structural integrity and even wear Compatibility Front brake position only. Compatible where HB184 is specified: KTM Duke 125 / 200 / 250 / 390 KTM RC 125 / 200 / 250 / 390 KTM Adventure 250 / 390 (Gen 2) Gen 3 Adventure models use a different pad code (HB164). See the Gen 3-specific listing. Pad Code Reference Front: HB184 (this listing) | Rear: HB163 — sold separately. Installation Notes Bed in pads correctly after installation Inspect disc condition, caliper movement, and brake fluid during replacement Professional installation recommended In The Box 1 x NGage Whisker Ceramic Front Brake Pad set (HB184)

Read more less