ON SALE | Rawtorque

Rolon BPR brass-plated sealed chain and sprocket kit for the Benelli TNT 300 and TNT 302R. Supplied as a complete drivetrain set, matched to OE gearing.What's in the kit Brass-plated sealed chain R525HAXRC-108-2 Front sprocket 14T (S 01 849) Rear sprocket 44T (S 01 894), 5 holes Rolon kit reference HAXRC 324 Why the BPR kit Heavy-duty 525 pitch chain sized for the parallel twin Quadruple-sealed ring construction holds factory grease in and grit out Brass plating for corrosion resistance and a lasting gold finish Rubberised front sprocket damps drivetrain noise and acts as a damper Chain and sprockets wear together and should always be replaced as a set. Message us for fitment guidance if you are unsure which model year you have.

Read more less

Top Tec 4100 5W-40 is a premium, low-friction synthetic engine oil for modern petrol and diesel cars, in a 5-litre pack sized for a full service with margin to spare. It keeps engines exceptionally clean, protects over long drain intervals and suits a wide range of European vehicles. What it does Outstanding engine cleanliness and high lubrication reliability Strong protection over extended oil-change intervals Stable across a wide operating temperature range Specifications Article number: 9511 Viscosity: SAE 5W-40 Content: 5 L Meets / suitable for: API SN; ACEA C3; VW 502 00 / 505 00 / 505 01; MB-Approval 229.51; BMW Longlife-04; Porsche C30 Fitment guidance For petrol and diesel engines specifying a 5W-40 of this class. Always confirm the grade and approval your engine requires. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack. Genuine Liqui Moly, made in Germany.

Read more less

EBC DPX2023 is a front-axle brake pad set for the Renault & Nissan, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Renault & Nissan. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Brembo P50151 is a rear-axle brake pad set for the Mercedes A class saloon V177 A200D, GLA New shape petrol, measuring 106 mm wide and 49 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 106 mm Thickness 17 mm Height 49 mm Braking system CBI WVA number 22986 FMSI D2207 9447 Wear indicator Without Accessories With anti-squeal shim With accessories With brake caliper bolts Axle Rear EAN code 8020584115510 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes A class saloon V177 A200D, GLA New shape petrol. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P36027 is a front-axle brake pad set for the Jaguar XJL/XF 3.0 ltr X250, measuring 155 - 156 mm wide and 74 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 155 - 156 mm Thickness 19 mm Height 74 mm Braking system Teves WVA number 24079,24080 FMSI D1240 8357, D1472 8357 Wear indicator Prepared for wear indicator Accessories With piston clip With accessories With anti-squeal shim Axle Front EAN code 8020584108871 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Jaguar XJL/XF 3.0 ltr X250. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P50074 is a front-axle brake pad set for the Mercedes S Class W221 (2006 -2014), measuring 142 mm wide and 76 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 142 mm Thickness 18 mm Height 76 mm Braking system Brembo WVA number 23960 FMSI D1223 8343 Wear indicator Prepared for wear indicator Accessories With accessories With anti-squeal shim Axle Front EAN code 8020584061138 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes S Class W221 (2006 -2014). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

EBC DP1593 is a rear-axle brake pad set for the Mercedes M CLASS w164, GL X164 350 Cdi, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Mercedes M CLASS w164, GL X164 350 Cdi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Red Crash Guard for TVS Apache RTX 300 – Engine and Frame Protection The Mototorque Crash Guard Red for TVS Apache RTX 300 is designed to provide structural side protection to the engine and lower frame area of the motorcycle. Built specifically for the TVS Apache RTX 300, this crash guard integrates with the chassis mounting points to create a reinforced protective structure intended for minor falls and low-impact situations. The engine casing and lower frame sections are among the most exposed structural areas during a tip-over. Even low-speed drops during parking, tight maneuvering, or uneven surfaces can result in scratches, dents, or direct casing impact. A crash guard introduces an external structural layer that absorbs the initial point of contact before the engine or frame directly touches the ground. This red-finished crash guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures alignment with factory mounting geometry when installed correctly. Structural accessories must follow chassis balance and clearance to avoid unwanted vibration or misalignment. Designed Specifically for TVS Apache RTX 300 This crash guard is not universal. It is structured around the frame geometry of the TVS Apache RTX 300. Fitment advantages include: • Alignment with factory mounting points• Maintains ground clearance profile• Structured positioning around engine casing• Compatible with stock frame layout when installed properly Model-dedicated engineering ensures the guard complements the motorcycle’s structural design. Structural Protection for Real-World Riding Motorcycles can experience low-speed falls during urban riding, parking scenarios, or while navigating rough surfaces. In such cases, a crash guard can reduce direct impact exposure to the engine casing. This crash guard helps: • Reduce direct engine casing contact during tip-overs• Provide added side reinforcement• Distribute impact force across the guard structure• Support protective coverage in everyday riding conditions It is important to define scope clearly. This crash guard is intended to reduce damage during low-impact or tip-over situations. It is not designed to eliminate damage in high-speed collisions or major accidents. Red Finish – Visible Structural Presence The red finish introduces a bold contrast to the TVS Apache RTX 300’s side profile. Protective accessories can serve both structural and visual purposes. For riders who prefer a visible, performance-oriented stance, the red crash guard adds presence while retaining protective functionality. The finish integrates with the lower chassis area without appearing oversized when installed correctly. Practical Use Case This crash guard suits: • Daily commuters navigating traffic-dense environments• Riders frequently parking in tight spaces• Touring riders covering mixed surfaces• Owners seeking additional structural protection Protective accessories help preserve the condition of exposed engine areas and support long-term ownership value. Installation and Fitment Professional installation is recommended to ensure secure alignment and correct torque settings. Structural accessories must be mounted properly to perform effectively. Since this crash guard is designed specifically for the TVS Apache RTX 300, installation aligns with factory geometry when installed as intended. Build and Application • Designed for: TVS Apache RTX 300• Application: Engine and lower frame side protection• Finish: Red This accessory integrates into the chassis structure while maintaining intended riding ergonomics.Configuration Note:This model is equipped with standard integrated sliders. The slider assembly in this version does not include a beak extension. Customers seeking a beak-style slider design should verify compatibility before placing an order. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Crash Guard for TVS Apache RTX 300 – Engine and Frame Protection The Mototorque Crash Guard for TVS Apache RTX 300 is designed to provide structural side protection to the engine and lower frame area of the motorcycle. Developed specifically for the TVS Apache RTX 300, this crash guard integrates with the motorcycle’s chassis mounting points to deliver reinforced support during minor falls or tip-over situations. The engine casing and lower frame sections are exposed areas that can sustain surface damage if the motorcycle leans excessively or falls at low speed. Even controlled parking mishaps can lead to scratches or dents. A crash guard acts as a protective buffer by introducing a rigid external structure that absorbs initial contact before the engine or frame touches the ground. This crash guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures alignment with the stock mounting configuration and maintains balance when installed correctly. Precision fitment is important in structural accessories, as improper installation can affect stability or create unwanted vibration. Designed Specifically for TVS Apache RTX 300 This crash guard is not universal. It is structured around the chassis geometry of the TVS Apache RTX 300. Fitment advantages include: • Alignment with factory mounting points• Designed to maintain ground clearance profile• Structured positioning around engine casing• Compatible with stock frame layout when installed properly Model-dedicated engineering ensures the guard complements the motorcycle’s structure rather than interfering with it. Structural Protection for Everyday Use Motorcycles can encounter low-speed falls during traffic movement, parking, uneven surfaces, or tight maneuvering. In such instances, a crash guard can reduce direct contact between the engine casing and the ground. This crash guard helps: • Minimize direct engine casing impact during tip-overs• Provide protective coverage to lower frame sections• Distribute force across the guard structure• Add confidence during daily riding conditions It is important to define scope clearly. A crash guard is intended to reduce potential damage in low-impact situations. It is not designed to eliminate damage in high-speed collisions or severe accidents. Practical Riding Application This crash guard suits: • Daily commuters navigating city traffic• Riders parking frequently in confined spaces• Touring riders covering varied road surfaces• Owners seeking added structural engine-side protection Protection accessories contribute to preserving the condition of exposed mechanical areas. Maintaining the exterior integrity of the engine casing supports long-term ownership value. Installation and Fitment Considerations Professional installation is recommended to ensure proper torque settings and alignment. Structural accessories must be mounted securely to function effectively. Since this crash guard is designed specifically for the TVS Apache RTX 300, installation aligns with factory geometry when installed correctly. No structural modification should be required under proper fitment procedures. Build and Application • Designed for: TVS Apache RTX 300• Application: Engine and lower frame side protection The crash guard integrates into the chassis area while maintaining the intended riding ergonomics and clearance.Configuration Note:This model is equipped with standard integrated sliders. The slider assembly in this version does not include a beak extension. Customers seeking a beak-style slider design should verify compatibility before placing an order. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

White Crash Guard for TVS Apache RTX 300 – Frame and Engine Protection The Mototorque Crash Guard White for TVS Apache RTX 300 is designed to provide structural protection to the motorcycle’s engine and lower frame area during minor falls or impact situations. Built specifically for the TVS Apache RTX 300, this crash guard integrates with the motorcycle’s chassis structure to deliver reinforced side protection while maintaining functional compatibility. A crash guard serves as a protective barrier between the motorcycle’s core components and the ground in case of a tip-over or low-speed fall. The engine casing and lower frame are vulnerable areas during such situations. Direct contact can result in scratches, dents, or structural damage. A crash guard introduces a rigid external frame that absorbs initial impact and helps reduce direct stress on critical components. This white-finished crash guard is engineered exclusively for the TVS Apache RTX 300. Model-specific design ensures alignment with factory mounting points and maintains structural balance when installed correctly. Precision fitment matters because improper installation or incompatible guards can affect ride stability or cause unwanted vibration. Designed Specifically for TVS Apache RTX 300 This crash guard is not universal. It is structured around the chassis dimensions and mounting configuration of the TVS Apache RTX 300. Key integration advantages include: • Alignment with stock frame mounting points• Designed to maintain ground clearance profile• Structured positioning around engine casing• Compatible with factory geometry when installed properly Model-dedicated fitment ensures that protection does not interfere with normal riding ergonomics. Structural Protection for Everyday Riding Motorcycles can experience low-speed drops during parking, tight maneuvering, or uneven surface riding. In such cases, the first point of contact often determines the extent of damage. A crash guard helps distribute impact force across its structure rather than allowing direct contact with the engine casing. This crash guard helps: • Reduce direct engine casing exposure during tip-overs• Protect lower frame sections• Add structural reinforcement to the side profile• Provide added confidence during daily riding It is important to clarify scope. A crash guard is designed to reduce damage during minor falls or low-impact situations. It is not intended to eliminate damage during high-speed collisions or major accidents. White Finish – Functional with Visual Presence The white finish adds a distinctive contrast to the TVS Apache RTX 300’s profile. Protective accessories can also serve as styling elements when integrated cleanly into the motorcycle’s structure. For riders who prefer a visible protective framework rather than concealed protection, a white crash guard provides both structural and aesthetic presence. It enhances the visual stance while retaining functional purpose. Practical Use Case This crash guard suits: • Daily commuters navigating urban environments• Riders parking frequently in tight spaces• Touring riders covering mixed terrain• Owners seeking structural engine-side protection Protection accessories should balance durability and integration. This crash guard is intended to work alongside the factory structure without requiring structural modification when installed properly. Installation and Fitment Professional installation is recommended to ensure proper torque and alignment. Structural accessories must be securely mounted to perform effectively. Proper installation helps maintain balance and minimizes vibration. Since this crash guard is designed specifically for the TVS Apache RTX 300, it aligns with factory mounting geometry under correct installation procedures. Build and Application • Designed for: TVS Apache RTX 300• Application: Engine and frame side protection• Finish: White This accessory integrates into the lower chassis area while preserving the motorcycle’s intended structure.Configuration Note:This model is equipped with standard integrated sliders. The slider assembly in this version does not include a beak extension. Customers seeking a beak-style slider design should verify compatibility before placing an order. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 – Beak-Compatible Design The Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 is designed to provide structural protection while maintaining compatibility with the motorcycle’s front-end design, including beak setups. Built using mild steel construction, the crash guard is intended to offer support around key impact areas such as the engine and lower frame. The design integrates multiple slider points, positioned to help manage contact during low-speed falls or tip-overs. The Moto Torque Stallion Pro Crash Guard for TVS Apache RTX 300 is developed for direct fitment, aligning with the motorcycle’s mounting points without requiring modification. Key design highlights include: Beak-compatible structure – accommodates the RTX 300 front designMulti-point mounting layout – distributes load across mounting areasIntegrated sliders – positioned to reduce direct impact transferPowder-coated black finish – for surface protection and finish durability This crash guard is intended for riders looking to add a protection layer without altering the overall stance or design of the motorcycle. Specifications Brand: Moto TorqueProduct Type: Crash GuardCompatibility: TVS Apache RTX 300Material: Mild SteelFinish: Black (Powder Coated)Installation: Direct Fit (Bolt-on)Design: Beak-Compatible with integrated sliders

Read more less

TVS Apache RTX 300 Stallion Pro Crash Guard Red – Mototorque Product Description The TVS Apache RTX 300 Stallion Pro Crash Guard Red from Moto Torque is designed specifically for the TVS Apache RTX 300. This crash guard is developed as a model-specific protection accessory, engineered to align with the RTX 300 chassis. Constructed from heavy-duty mild steel, the guard is built with a four-point mounting structure. The layout is intended to distribute impact forces across mounting points during tip-over scenarios. The unit includes impact-absorbing sliders, positioned to create spacing between the motorcycle body and the ground surface. The TVS Apache RTX 300 Stallion Pro Crash Guard Red features a black-compatible precision fitment design tailored exclusively for the RTX 300 platform. It is finished in Red powder coating, forming a corrosion-resistant surface layer. The design integrates with the frame geometry of the TVS Apache RTX 300 without requiring structural modifications. This crash guard is positioned as a direct-fit protection solution for riders seeking engine and lower frame coverage on the TVS Apache RTX 300. Warranty Disclaimer This product includes a 6-month manufacturer warranty and a lifetime warranty on stainless steel nuts and bolts, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Mototorque Product Type: Crash Guard Motorcycle Compatibility: TVS Apache RTX 300 Material: Mild Steel Finish: Red Powder-Coated Mounting Type: Four-Point Mounting Sliders: Impact-Absorbing Sliders Included Warranty: 6 Months Manufacturer Warranty Hardware Warranty: Lifetime on Stainless Steel Nuts and Bolts

Read more less

TVS Apache RTX 300 Stallion Pro Crash Guard White – MotoTorque Product Description The TVS Apache RTX 300 Stallion Pro Crash Guard White from Moto Torque is designed specifically for the TVS Apache RTX 300. This crash guard is developed as a model-specific protection accessory, engineered to align with the RTX 300 chassis. Constructed from heavy-duty mild steel, the guard is built with a four-point mounting structure. The layout is intended to distribute impact forces across mounting points during tip-over scenarios. The unit includes impact-absorbing sliders, positioned to create spacing between the motorcycle body and the ground surface. The TVS Apache RTX 300 Stallion Pro Crash Guard White features a black-compatible precision fitment design tailored exclusively for the RTX 300 platform. It is finished in white powder coating, forming a corrosion-resistant surface layer. The design integrates with the frame geometry of the TVS Apache RTX 300 without requiring structural modifications. This crash guard is positioned as a direct-fit protection solution for riders seeking engine and lower frame coverage on the TVS Apache RTX 300. Warranty Disclaimer This product includes a 6-month manufacturer warranty and a lifetime warranty on stainless steel nuts and bolts, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: MotoTorque Product Type: Crash Guard Motorcycle Compatibility: TVS Apache RTX 300 Material: Mild Steel Finish: White Powder-Coated Mounting Type: Four-Point Mounting Sliders: Impact-Absorbing Sliders Included Warranty: 6 Months Manufacturer Warranty Hardware Warranty: Lifetime on Stainless Steel Nuts and Bolts

Read more less

Brembo P37017 is a front-axle brake pad set for the Mercedes M CLASS w166 (2012 - )/GL X166 and GLS/GLE, GL X166 (2012 -) with plain disc, measuring 193 - 194 mm wide and 64 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 193 - 194 mm Thickness 19 mm Height 64 mm Braking system Teves WVA number 25192,25190,25191 FMSI D1455 8655 Wear indicator Acoustic Accessories With piston clip With accessories With anti-squeal shim Axle Front EAN code 8020584109540 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes M CLASS w166 (2012 - )/GL X166 and GLS/GLE, GL X166 (2012 -) with plain disc. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

EBC DP1494 is a rear-axle brake pad set for the BMW 5 SERIES E60 (2003- 2010), using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the BMW 5 SERIES E60 (2003- 2010). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

EBC DP1938 is a front-axle brake pad set for the BMW X5 F15 and also old / X6 F16 and also old, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the BMW X5 F15 and also old / X6 F16 and also old. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Brembo 09841111 is a front-axle brake disc for the Mercedes W203 Class C class (2001-2007), measuring 288 mm diameter and 25 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 288 mm Thickness 25 mm Minimum thickness 22.4 mm Height 47 mm Bolt holes 5 Centering bore 67 mm Disc type Ventilated Axle Front Units per box 1 EAN code 8020584013786 New thickness is 25 mm and the manufacturer's minimum is 22.4 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Mercedes W203 Class C class (2001-2007). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

EBC DPX2337 is a rear-axle brake pad set for the Mercedes E CLASS W213 E350D non sports pack, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Mercedes E CLASS W213 E350D non sports pack. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Brembo P44025 is a rear-axle brake pad set for the Landrover Ragne Rover III (2002 -2012) Vogue, measuring 117 mm wide and 63 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 117 mm Thickness 17 mm Height 63 mm Braking system TRW WVA number 25085 FMSI D1427 8544 Wear indicator Prepared for wear indicator Accessories With brake caliper bolts With accessories With anti-squeal shim Axle Rear EAN code 8020584110133 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Landrover Ragne Rover III (2002 -2012) Vogue. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

EBC DP1789 is a front-axle brake pad set for the Mini Country man (R60 2010 onwards), CooperS R56 Petrol, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Mini Country man (R60 2010 onwards), CooperS R56 Petrol. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

BMC FB311/01 Performance Air Filter for VW / Skoda 1.2 MPI PlatformThe 1.2 MPI is the entry point to the VW-Skoda range — and a washable filter is the smartest first upgrade.The BMC FB311/01 is a direct-fit washable performance air filter for the Volkswagen Ameo, Polo and Skoda Fabia (1.2 MPI). BMC reusable cotton-gauze media replaces the stock paper element.This is a direct-fit replacement — it drops straight into the factory airbox with no cutting, no modification, and no extra hardware. Fits the VW Ameo, Polo and Skoda Fabia 1.2 MPI.Why riders choose BMC Washable and reusable — clean it, re-oil it, refit it. One filter for the life of the car. Multi-layer cotton gauze for higher airflow than a stock paper element, without leaving the engine exposed. Made in Italy by BMC, an OEM and motorsport-grade air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less

Brembo P85070 is a rear-axle brake pad set for the Porsche & Audi, measuring 117 mm wide and 73 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 117 mm Thickness 17 mm Height 73 mm Braking system Brembo WVA number 23694 FMSI D978 7879 Wear indicator Prepared for wear indicator Accessories With counterweights With anti-squeal shim With accessories Axle Rear EAN code 8020584058732 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Porsche & Audi. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

BMC FM551/04 Performance Air Filter for Kawasaki Ninja 250 / 300The Ninja 250/300 twin was the bike that introduced a generation to sport riding.The BMC FM551/04 is a direct-fit washable performance air filter for the Kawasaki Ninja 250 and Ninja 300 (2013–2017). It replaces the stock paper element with BMC reusable cotton-gauze media.This is a direct-fit replacement — it drops straight into the factory airbox with no cutting, no modification, and no extra hardware. Fits the Kawasaki Ninja 250 and Ninja 300.Why riders choose BMC Washable and reusable — clean it, re-oil it, refit it. One filter for the life of the 296. Multi-layer cotton gauze for higher airflow than a stock paper element, without leaving the engine exposed. Made in Italy by BMC, an OEM and motorsport-grade air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less

BMC FM746/01 Performance Air FilterOne genuine BMC filter, multiple machines. The BMC FM746/01 is a direct-fit washable performance air filter that fits the BMW Motorrad C400 GT (2018-20). Engine fitments: 350cc.This is a direct replacement for the stock element — it drops into the factory airbox with no cutting or modification. BMC's multi-layer cotton-gauze media delivers freer airflow and crisper throttle response over a disposable paper filter.Why riders choose BMC Washable and reusable — clean, re-oil and refit for the life of the bike. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less