ON SALE | Rawtorque

Brembo P83107 is a front-axle brake pad set for the Toyota & Lexus, measuring 144 mm wide and 83 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 144 mm Thickness 18 mm Height 83 mm Braking system Advics WVA number 24395,24386,24394 FMSI D1303 8419 Wear indicator Acoustic Accessories With anti-squeal shim Axle Front EAN code 8020584090930 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Toyota & Lexus. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P85121 is a front-axle brake pad set for the Skoda & VW, measuring 131 mm wide and 52 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 131 mm Thickness 18 mm Height 52 mm Braking system TRW WVA number 25682,25681 FMSI D1776 9006 Wear indicator Without Accessories With brake caliper bolts With accessories With anti-squeal shim Axle Front EAN code 8020584103944 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

Brembo P50067 is a front-axle brake pad set for the Mercedes C CLASS W204(2008-2015)/E class W212 (E200&220), measuring 146 mm wide and 72 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 146 mm Thickness 21 mm Height 72 mm Braking system Lucas WVA number 24306 FMSI D1340 8451 Wear indicator Prepared for wear indicator Accessories With brake caliper bolts With accessories With anti-squeal shim Axle Front EAN code 8020584061060 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mercedes C CLASS W204(2008-2015)/E class W212 (E200&220). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

SMK Allterra Off-Road HelmetThe SMK Allterra is a motocross lid developed with MX riders, and at 1300 g it is the lightest helmet SMK makes. The peak adjusts and removes, the eye port is cut wide for goggles, and the vent channels run right through the EPS rather than stopping at the shell.Technical Specifications Brand SMK Model Allterra Helmet Type Off-Road / Motocross Shell Material Energy Impact Resistant Thermoplastic (EIRT) Certification ISI 4151 & ECE 22.06 & DOT FMVSS 218 Shell Sizes 2 EPS Multi-density Peak Adjustable, multi-position, removable Retention Double D-ring Weight 1300 g / 1400 g, ±50 g Interior Removable, washable, hypoallergenic Ventilation Multiple intakes and exhausts, channeled Goggle Port Extra-wide for MX goggles Available Colours MA260 - Matt Black Key Features 1300 g - the lightest helmet in the SMK range Adjustable multi-position peak, fully removable Extra-wide eye port sized for MX goggles ISI 4151, ECE 22.06 and DOT certified Double D-ring retention Channeled ventilation through the EPS, not just the shell Size Chart Size Head Circumference XS 54 cm S 56 cm M 57 cm L 58 cm XL 60 cm 2XL 62 cm Two shell sizes, so the helmet stays proportioned instead of looking oversized on smaller heads.Measure your head circumference at the widest point, roughly 2.5 cm above the eyebrows, and pick the closest size. If you fall between two sizes, size up.Fitment & Safety NoteHelmets are non-returnable and non-exchangeable for safety and hygiene reasons. Check your size before ordering. Colours may render slightly differently between screens.In The Box 1 × SMK Allterra Off-Road Helmet Clear visor (fitted) Helmet bag and user documentation

Read more less

Legundary Hero Xpulse 210 Xplorer Crash Guard – Black Mild Steel Protection The Legundary Hero Xpulse 210 Xplorer Crash Guard (Black) is purpose-built for riders who push their Hero Xpulse 210 beyond city roads. Designed for structural reinforcement and impact absorption, this crash guard adds a serious layer of protection without compromising fitment or riding dynamics. Manufactured using high-quality mild steel, the guard is engineered to absorb and distribute impact forces during unexpected drops or collisions. Its precision-bent construction ensures a proper alignment with the Xpulse 210 chassis, maintaining stability and mounting integrity. The multi-point mounting design strengthens the front section of the motorcycle while preserving essential clearances. Whether navigating rocky trails or everyday commuting, this crash guard protects critical components including the engine casing, radiator area, and tank sides. Construction & Engineering High-grade Mild Steel build CNC precision bending for accurate fitment Multi-point mounting structure Impact-distribution frame design Finish & Surface Protection Finished in Black powder coating, the crash guard offers resistance against corrosion, moisture, and surface wear. The matte black finish blends seamlessly with the Xpulse 210’s adventure styling while maintaining long-term durability. Protection Coverage Engine casing protection Radiator support area coverage Tank side structural shielding Front body reinforcement Designed specifically for the Hero Xpulse 210, this crash guard ensures a secure fit without requiring modifications. Specifications Material: Mild Steel Finish: Black Powder Coated Bike Compatibility: Hero Xpulse 210

Read more less

Royal Enfield Bear 650 Thanos Crash Guard with Slider – Legundary Mild Steel Product Description The Royal Enfield Bear 650 Thanos Crash Guard with Slider from Legundary is designed specifically for the Royal Enfield Bear 650. This crash guard setup includes integrated sliders and is built to provide structural protection around the engine and lower section of the motorcycle. Constructed from mild steel and finished in black, the guard follows a model-specific layout intended to align with the Royal Enfield Bear 650 chassis. The integrated sliders extend outward from the guard structure and are positioned to create separation between key components and the ground surface during impact scenarios. The Royal Enfield Bear 650 Thanos Crash Guard with Slider measures 63 x 42 x 51 cm and has a listed weight of 4.23 kg. It is described as an easy-install component engineered to integrate with the motorcycle’s frame structure. For riders seeking a dedicated crash protection solution for the Royal Enfield Bear 650, this Legundary Thanos Crash Guard with Slider provides a direct-fit mild steel setup with integrated side sliders. Specifications Brand: Legundary Product Type: Crash Guard with Slider Motorcycle Compatibility: Royal Enfield Bear 650 Material: Mild Steel Finish: Black Dimensions: 63 x 42 x 51 cm Weight: 4.23 kg Installation: Easy Installation

Read more less

LCB Bazooka Crash Guard with Slider — Royal Enfield Himalayan 450 The LCB Bazooka Crash Guard with Slider is a purpose-built protection accessory for the Royal Enfield Himalayan 450. Mild steel construction with integrated impact sliders — designed to absorb and disperse impact forces during a fall or slide, reducing damage to exposed engine parts and lower bodywork. Bolts directly to factory mounting points with no drilling, cutting, or frame modification required. Technical Specifications Brand Legundary Custom Builds (LCB) Material High-strength Mild Steel Finish Matte Black Weight 5.62 kg Dimensions (L×B×H) 55 × 43 × 43 cm Application Royal Enfield Himalayan 450 only Warranty 6-month manufacturer warranty Key Features Integrated impact sliders — absorb and distribute impact energy to reduce direct engine and frame damage during a tip-over or slide Bazooka tubular profile — geometry tuned to maintain lean-angle clearance and avoid interference with normal riding posture Mild steel construction — resists bending and cracking under stress Matte black finish — corrosion resistance against rain, dirt, and regular use Direct bolt-on — no drilling, cutting, or permanent modification to the frame Purpose-built for Himalayan 450 — not compatible with other Himalayan models Ideal For Daily commuting Street riding Long-distance touring Light off-road exploration Weekend adventure trips Installation Notes Mounts to factory frame mounting points — no modification required Torque all mounting bolts to specification After any impact, check hardware tightness Inspect sliders and bolts periodically for wear Professional installation recommended Frequently Asked Questions Is this compatible with other Himalayan models?No. Designed specifically for Himalayan 450. Will not fit older Himalayan variants. Does it require frame modification?No. Bolts directly to factory mounting points without cutting or permanent changes. How do the sliders help?Sliders absorb and distribute impact forces, reducing direct scraping on engine and frame surfaces during a fall. In The Box LCB Bazooka Crash Guard with Slider Button Type Hexagon Socket Bolt — SS M8×16 Slider Set with Bolt AI Spacer — OD15, ID8.5, L17mm Warranty Covered under Legundary Custom Builds 6-month manufacturer warranty for defects in workmanship or material. Rawtorque does not provide additional warranty beyond manufacturer coverage.

Read more less

The Moto Torque Tornado Crash Guard v2.0 is designed specifically for the Suzuki V-Strom SX 250, providing structural protection to the engine and lower frame area. This crash guard is built using forged iron 25mm cold rolled (CR) mild steel tubes with reinforced wall thickness of 1.6mm, as stated in the official product description. This is not a universal crash guard. It is engineered exclusively for the Suzuki V-Strom SX 250 platform. Model-Specific Engineering Designed for Suzuki V-Strom SX 250 Precision-positioned mounting points Structured alignment with chassis geometry Intended to distribute impact force through engineered mounting locations Fitment is tailored specifically for the V-Strom SX 250. Compatibility with other motorcycles is not stated. Heavy-Duty Construction 25mm CR mild steel tubes 1.6mm reinforced wall thickness Designed to absorb initial impact force Intended to disperse shock energy before it reaches the engine and frame The manufacturer states that the high-impact nylon slider acts as the first line of defence, absorbing and dispersing impact energy. Integrated High-Impact Nylon Slider Strategically positioned nylon slider Designed to absorb initial force during a fall Intended to protect engine, frame, and essential components The slider functions as an external impact interface before direct contact reaches structural components. Scope clarification: This crash guard is intended to reduce damage during tip-overs and low to moderate impact scenarios. It is not designed to prevent damage in high-speed collisions. Mounting & Hardware Precisely positioned mounting points Secured using high-grade stainless steel 304 nuts and bolts Designed for structured load distribution Proper installation is necessary to ensure intended structural performance. Real-World Use Case Suitable for: Urban riding conditions Long-distance touring Mixed surface riding Riders seeking added engine and frame protection Protective accessories are intended to reduce exposure of critical components during falls or slides. What’s Included Crash guard assembly Integrated nylon sliders Stainless steel 304 nuts and bolts DIY fitment guide (as mentioned) Warranty 6 Months Warranty on paint/powder coating & welding Lifetime Warranty on bolts & nuts Rawtorque does not provide a separate warranty beyond manufacturer coverage. Warranty claims are subject to manufacturer policy. Product Specifications Brand: Moto Torque Product Name: Tornado Crash Guard v2.0 Motorcycle Compatibility: Suzuki V-Strom SX 250 Material: 25mm Cold Rolled Mild Steel Wall Thickness: 1.6mm Slider Type: High-impact nylon Hardware: Stainless Steel 304 Application: Engine & frame side protection

Read more less

EBC DPX2153 is a rear-axle brake pad set for the Audi, Skoda & VW, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Audi, Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

DBA DB15101SS is a brake pad set for the Porsche Macan 4 cylinder petrol, using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the Porsche Macan 4 cylinder petrol. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

DBA DB2186SS is a brake pad set for the AUDI Q5 (2010 to 2013), using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the AUDI Q5 (2010 to 2013). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

DBA DB15101SS is a brake pad set for the AUDI Q5 (2013 onwards), using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the AUDI Q5 (2013 onwards). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

DBA DB2184SS is a brake pad set for the AUDI A4 (2008 to 2016)8k model, using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the AUDI A4 (2008 to 2016)8k model. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

DBA DB2186SS is a brake pad set for the AUDI A7 & RS7 (2013 - ), using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the AUDI A7 & RS7 (2013 - ). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

DBA DB2186SS is a brake pad set for the AUDI A6 (2011 Onwards), using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the AUDI A6 (2011 Onwards). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

DBA DB2184SS is a brake pad set for the AUDI A5 (2007 to present), using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the AUDI A5 (2007 to present). Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

Brembo P28045 is a front-axle brake pad set for the Honda CRV III, measuring 151 mm wide and 57 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 151 mm Thickness 19 mm Height 57 mm Braking system Bosch WVA number 24639,24640,24638 FMSI D1946 9170 Wear indicator Acoustic Accessories With accessories With anti-squeal shim With brake caliper bolts Axle Front EAN code 8020584060582 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Honda CRV III. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

EBC DPX2068 is a rear-axle brake pad set for the Landrover Ragne Rover III (2002 -2012) Vogue, using the EBC Ultimax compound, an OE-replacement pad built for quiet, low-dust daily driving.EBC Ultimax characteristics Intended use Everyday road driving, hot and cold climates Equivalence Direct OE replacement Friction rating GG Dust Minimal Noise One of EBC's quietest formulations Bedding in BRAKE-IN surface coating for a fast bed-in Approval ECE R90 approved Fitment guidanceListed against the Landrover Ragne Rover III (2002 -2012) Vogue. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. One set covers both wheels on the axle.Compound characteristics as published by EBC.

Read more less

Brembo P06051 is a front-axle brake pad set for the Mini Country man (R60 2010 onwards), CooperS R56 Petrol, measuring 132 mm wide and 63 mm tall.Brembo Prime pads are OE-matched for braking performance, low noise and comfort on the road.Specification Width 132 mm Thickness 18 mm Height 63 mm Braking system TRW WVA number 23985,23984 FMSI D1204 8324 Wear indicator Prepared for wear indicator Accessories With brake caliper bolts With accessories With anti-squeal shim Axle Front EAN code 8020584059999 These pads are prepared for a wear indicator. If your car uses an electronic wear sensor, the sensor is a separate part and is normally replaced at the same time as the pads.Fitment guidanceListed against the Mini Country man (R60 2010 onwards), CooperS R56 Petrol. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the front axle. One set covers both wheels on the axle.Specifications published by Brembo.

Read more less

DBA DB2065SS is a brake pad set for the Mitsubush Cedia, using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the Mitsubush Cedia. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

Brembo 08716511 is a rear-axle brake disc for the Skoda & VW, measuring 230 mm diameter and 9 mm thick.Brembo Prime is the OE-equivalent disc line, developed for road use and finished with a corrosion coating.Specification Diameter 230 mm Thickness 9 mm Minimum thickness 7 mm Height 40 mm Bolt holes 5 Centering bore 65 mm Disc type Solid Axle Rear Units per box 1 EAN code 8020584018132 New thickness is 9 mm and the manufacturer's minimum is 7 mm. Measure at the thinnest point across the braking surface; once a disc reaches minimum thickness it must be replaced rather than resurfaced.Fitment guidanceListed against the Skoda & VW. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.This listing covers the rear axle. Discs are sold individually and replaced as a pair, so you need two for the axle.Specifications published by Brembo.

Read more less

DBA DB1232SS is a brake pad set for the Maruti/suzuki Scross, using the DBA Street Series (SS) compound, a comfort-focused street pad with low noise and low dust.DBA Street Series (SS) characteristics Intended use General light-duty street driving Priority Comfort: low noise, low dust Bedding in Bedding-in stripe gives higher initial friction while the pad beds Fitment guidanceListed against the Maruti/suzuki Scross. Brake parts vary by variant, engine, build year and the braking system fitted, so send us your registration number and we will help you confirm the right part before you order.Buying this partGST-inclusive pricing with a proper invoice, shipped across India.Compound characteristics as published by DBA.

Read more less

Product Overview The Legundary (LCB) Poseidon Saddle Stay with Carrier is designed specifically for: Bajaj Dominar 400 This is an integrated setup combining a saddle stay and rear carrier into one unified structure. Built for riders who need mounting support for saddle bags along with a top carrier platform. Model-specific design. Not universal. Compatibility Bajaj Dominar 400 As mentioned: compatible only with Dominar 400. Construction & Finish Material: Mild Steel Finish: Black Tubing: Heavy-duty mild steel tubes Coating: Weather- and corrosion-resistant powder coating Dimensions & Weight Dimensions: 55 x 40 x 15 cm (L x B x H) Weight: 5.175 kg Key Features 2-in-1 integrated saddle stay and carrier Compatible with aluminium and mild steel panniers (with respective universal mounting base plate) 3-point mounting design Built using heavy-duty mild steel tubes Black powder-coated finish Function Provides side support for saddle bags Prevents luggage contact with wheel/exhaust area Top platform allows mounting of luggage or carrier plate Structured rear support system Installation Model-specific mounting points 3-point mounting system Professional installation recommended Specifications Brand: Legundary (LCB) Product: Poseidon Saddle Stay with Carrier Compatible Model: Bajaj Dominar 400 Material: Mild Steel Finish: Black Dimensions: 55 x 40 x 15 cm Weight: 5.175 kg

Read more less

BMC FM964/04 Performance Air Filter for Aprilia SR 150 / SR 160India's sportiest 150-class scooter deserves more than a paper filter.The BMC FM964/04 is a direct-fit washable performance air filter for the Aprilia SR 150 and SR 160. It swaps the stock disposable element for BMC's reusable cotton-gauze media, improving airflow while staying street-friendly.This is a direct-fit replacement — it drops straight into the factory airbox with no cutting, no modification, and no extra hardware. Fits the Aprilia SR 150 and SR 160.Why riders choose BMC Washable and reusable — clean it, re-oil it, refit it. One filter for the life of the scooter. Multi-layer cotton gauze for higher airflow than a stock paper element, without leaving the engine exposed. Made in Italy by BMC, an OEM and motorsport-grade air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist.

Read more less