Products

The BMC FM576/08 Air Filter is a performance replacement filter designed for Volkswagen and Skoda vehicles built on the VAG platform, including the Polo, Vento, Rapid, and Fabia. This filter replaces the stock paper air filter inside the OEM airbox, delivering improved airflow while maintaining proper filtration, making it suitable for both daily driving and long-term use. Built using multi-layered oiled cotton gauze, the filter is engineered to allow higher air intake compared to conventional paper filters, supporting smoother engine breathing and consistent performance. Unlike disposable filters, the BMC unit is washable and reusable, offering long-term value when maintained with proper cleaning kits. The filter is manufactured using a full moulding process, ensuring structural durability without weak joints or deformation over time. Key Benefits Improved airflow over stock paper filterReusable and washable designStable filtration for daily driving conditionsDirect OEM airbox replacementLong service life with proper maintenance Compatibility (Primary India Focus) Volkswagen Polo 1.2 TSI (2011–2014)Polo 1.6 TDI (2009–2014)Vento 1.6 TDI (2010–2018) Skoda Rapid 1.6 TDI (2011–2015)Rapid 1.2 TSI (2012–2015)Rapid 1.4 TSI (select variants)Fabia 1.2 TSI (2010–2014)Fabia 1.6 TDI (2010–2014) Additional Global Compatibility Also compatible with the following VAG platform vehicles: Audi A1 (8X) 1.2 TFSIA1 (8X) 1.4 TFSIA1 (8X) 1.6 TDI SEAT Ibiza III / IV (1.2 TSI / 1.4 TSI / 1.6 TDI)Ibiza CupraToledo IV (1.2 TSI / 1.4 TSI / 1.6 TDI) Skoda (Extended) Fabia II (1.2 TSI / 1.6 TDI)PraktikRoomster Volkswagen (Extended) Polo (6R / 6C platform variants)Polo BluemotionGolf (select variants)Lupo (select variants) ⚠️ Add THIS line right below (critical control) Compatibility varies based on engine code and production year. Always verify fitment with your specific vehicle before purchase. Specifications Brand: BMCModel: FM576/08Filter Type: Cylindrical Air FilterFilter Material: Oiled Cotton GauzeWashable: YesReusable: YesHeight: 170 mm

Read more less

Six cylinders. Eight cylinders. One intake system built for both. The BMC C.D.A Induction Kit — ACCDA100-150 is BMC's premium carbon dynamic airbox system engineered specifically for 6-cylinder and V8 engines — the highest-displacement category in the civilian performance car space. The 100mm inlet diameter and 150mm filter body are matched to the airflow demands of these large engines, while the carbon fibre composite airbox generates a ram-air pressure effect at speed, delivering cooler and denser air than any OEM intake or conventional pod filter arrangement. Key benefits: 100mm inlet diameter: Matched to the high airflow demands of 6-cylinder and V8 engines Carbon fibre airbox: Aerodynamically profiled for ram-air effect — cooler, pressurised charge at speed Maximum isolation: Completely sealed from hot engine bay air — cold ambient air only Washable BMC cotton gauze element: Reusable for the life of the vehicle Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST Recommended For: 6-cylinder engines (inline and V6) V8 engines High-performance sedans, SUVs, and sports cars For the extended version with larger filter body, see ACCDA100-220-01 at ₹39,999.

Read more less

The flagship BMC carbon intake — maximum filter volume, maximum performance. The BMC C.D.A Induction Kit — ACCDA100-220-01 is the highest-specification cold air intake system in BMC's range for 6-cylinder and V8 engines. The 220mm filter body (versus 150mm on the standard ACCDA100-150) increases filter surface area significantly — reducing restriction further and sustaining peak airflow even under sustained high-RPM use. Combined with the carbon fibre aerodynamic airbox that generates a ram-air pressure effect at speed, this is the ultimate bolt-on intake upgrade for large-displacement performance engines. ACCDA100-220-01 vs ACCDA100-150 — what changes: Filter body length: 220mm vs 150mm — more filter surface area, lower restriction at high airflow Ideal for sustained performance driving and track use where the shorter filter can become a flow restriction Same 100mm inlet, same carbon fibre airbox, same ram-air principle — with more filtration capacity Key benefits: Extended 220mm filter body: Higher surface area for unrestricted airflow at sustained high-RPM operation Carbon fibre airbox: Ram-air effect at speed — cooler, pressurised intake charge Complete heat isolation: Sealed from hot engine bay air — cold ambient air only Washable BMC cotton gauze element: Reusable for the life of the vehicle Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST Recommended For: 6-cylinder and V8 engines in performance and enthusiast applications Drivers seeking the highest-spec bolt-on intake upgrade available from BMC

Read more less

The most advanced cold air intake BMC makes for sub-1600cc engines. The BMC C.D.A (Carbon Dynamic Airbox) Induction Kit — ACCDA70-130 takes cold air intake technology to its highest form for engines up to 1600cc. The C.D.A system uses a carbon fibre composite airbox — not just a sealed plastic box — to actively exploit airflow dynamics around the engine bay. As the car moves forward, the aerodynamic shape of the carbon airbox generates a positive pressure zone at the intake, ram-feeding denser air into the engine beyond what conventional D.I.A kits achieve. The result: more air, cooler charge, and measurably sharper throttle response — especially at higher speeds. C.D.A vs D.I.A — what's the difference? D.I.A: Sealed airbox drawing cool ambient air — significant upgrade over stock C.D.A: Carbon fibre airbox with aerodynamic ram-air effect — the highest level of BMC's bolt-on intake technology Key benefits: Carbon fibre airbox: Lightweight, heat-resistant, and aerodynamically shaped for ram-air effect at speed Cooler, denser intake charge: Draws from outside the engine bay — cold ambient air, not hot underbonnet air Ram-air effect: Aerodynamic profile increases intake pressure at speed for additional power gain Washable BMC cotton gauze element: Reusable filter with lifetime use Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST Recommended For: Performance-oriented drivers on engines up to 1600cc seeking the maximum intake upgrade For a more accessible cold air upgrade, see the D.I.A kit (ADDIA70-130) at ₹14,999. For the C.D.A above 1600cc, see ACCDA85-150 and ACCDA100-150.

Read more less

Carbon Dynamic Airbox — for the engines that demand more. The BMC C.D.A Induction Kit — ACCDA85-150 brings BMC's highest cold air intake technology to engines above 1600cc. The carbon fibre composite airbox is aerodynamically shaped to generate a ram-air pressure effect as vehicle speed increases — pushing a cooler, denser air charge into the engine beyond what a standard sealed airbox achieves. The 85mm inlet and 150mm filter body are sized specifically for the higher mass airflow demands of larger displacement engines. C.D.A vs D.I.A: D.I.A (ADDIA85-150, ₹17,999): Sealed plastic airbox — draws cold air, isolates from engine heat C.D.A (ACCDA85-150, ₹29,999): Carbon fibre airbox — adds aerodynamic ram-air effect on top of cold air isolation Key benefits: Carbon fibre airbox: Heat-resistant, lightweight, aerodynamically profiled for ram-air effect at speed Cooler, denser charge: Fully isolated from hot engine bay air — maximum intake temperature reduction Ram-air pressure: Positive pressure build at speed adds measurable power over D.I.A Washable BMC cotton gauze element: Reusable — no ongoing filter replacement costs Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST Recommended For: Engines above 1600cc — inline 4-cylinder, diesel, and turbo petrol applications For 6-cylinder and V8 applications, see ACCDA100-150 and ACCDA100-220-01.

Read more less

Everything you need to service your BMC filter — in one kit. The BMC Complete Washing Kit (WA250-500) bundles BMC's filter detergent and regeneration fluid together — the complete two-step maintenance system for every BMC cotton gauze air filter. Buy once, service your filter for years. No hunting for compatible products, no risk of using the wrong formulation. What's included: BMC Filter Detergent — 500ml (WADET500): Breaks down dirt and old oil from the cotton gauze — the wash step BMC Regeneration Fluid — 250ml (WAFLU250): Re-oils the cotton gauze after washing — the re-oil step Full service process: Remove filter from vehicle Apply detergent, soak 10 minutes, rinse from inside-out with low-pressure water Dry completely — no heat, no compressed air Apply regeneration fluid evenly across the gauze pleats Allow 20 minutes to absorb, reinstall Specifications: Detergent: 500ml liquid — WADET500 Regeneration Fluid: 250ml liquid — WAFLU250 Part No: WA250-500 Compatible with all BMC cotton gauze air filters — motorcycle and car For aerosol re-oiling fluid preference, see the WA200-500 kit (200ml aerosol + 500ml detergent). Genuine BMC product. MRP inclusive of 18% GST.

Read more less

The complete BMC washing kit — with aerosol re-oiling for easier application. The BMC Complete Washing Kit Aerosol (WA200-500) is the aerosol variant of BMC's complete filter service kit — pairing the standard 500ml filter detergent with a 200ml aerosol regeneration fluid for easier, more even re-oiling. The aerosol format is especially convenient for motorcycle filters with tighter pleat spacing, delivering an even oil coat without brush marks or pooling. What's included: BMC Filter Detergent — 500ml (WADET500): Official wash solution — breaks down dirt and old filter oil BMC Regeneration Fluid Aerosol — 200ml (WAFLU200): Spray re-oiling — even coverage across all pleat surfaces Specifications: Detergent: 500ml liquid — WADET500 Regeneration Fluid: 200ml aerosol — WAFLU200 Part No: WA200-500 Compatible with all BMC cotton gauze air filters — motorcycle and car For liquid (pour/brush) re-oiling preference, see the WA250-500 kit. Genuine BMC product. MRP inclusive of 18% GST.

Read more less

Clean crankcase ventilation — with a genuine BMC filter on the breather. The BMC Crankcase Vent Filters (FBSA Vent Series) are miniature cotton gauze filters designed for crankcase breather outlets — the vents that expel blow-by gases from the engine's crankcase. Fitting a BMC filter on the breather outlet prevents oil mist and contaminants from being discharged openly into the engine bay, while maintaining unrestricted crankcase ventilation pressure. Used in open-breather crankcase setups on modified engines, catch-can vent outlets, and any application where a filtered breather is needed at the final vent point. Available sizes: FBSA12-40 — 12mm inlet / 40mm body — ₹2,999 — For small breather outlets (12mm hose) FBSA16-40 — 16mm inlet / 40mm body — ₹2,999 — Standard breather outlet size FBSA20-40 — 20mm inlet / 40mm body — ₹3,299 — Larger breather applications FBSA25-40 — 25mm inlet / 40mm body — ₹3,449 — High-capacity breather, performance engines Common applications: Crankcase breather outlets on modified and track-prep engines Oil catch-can vent outlets — filters the vented air before it exhausts to atmosphere Any open-breather setup requiring a filter at the final vent point Key benefits: BMC cotton gauze construction: Genuine filtration on the breather outlet — prevents oil mist and debris discharge Washable and reusable: Service with BMC cleaning kit — no disposable filters Compact design: 40mm body fits tight spaces around the engine Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST

Read more less

BMC CRF605/08 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC CRF605/08 is a direct-fit washable performance air filter that fits the Audi R8 V10 (2010-2012) and Lamborghini Gallardo LP 550-2 / Spyder LP 560 (2008-13). Engine fitments: 5.2 V10.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC CRF612/08 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC CRF612/08 is a direct-fit washable performance air filter that fits the Audi R8 V8 FSI Coupe. Engine fitments: 4.2 V8.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC CRF726/01 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC CRF726/01 is a direct-fit washable performance air filter that fits the Lamborghini Aventador LP700-4 / LP770-4 SVJ (2011-16 / 18+). Engine fitments: 6.5 V12.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

Cold air means denser air. Denser air means more power. The BMC D.I.A (Direct Induction Airbox) Induction Kit is a bolt-on cold air intake system for petrol and diesel engines up to 1600cc. Unlike a simple pod filter swap, the D.I.A kit relocates the intake to a cooler airstream and encases it in a sealed airbox — ensuring the engine draws cooler, denser ambient air rather than hot underbonnet air. The result is a measurable improvement in throttle response and power across the rev range. BMC's oiled cotton gauze filter element sits at the heart of the kit — washable, reusable, and engineered to flow maximum air while keeping contaminants out. D.I.A Kit — Part No: ADDIA70-130 Key benefits: Cooler intake charge: Sealed airbox draws from outside the engine bay — cooler air = higher density = more power Significant airflow improvement: Over the OEM paper filter and stock intake routing Washable BMC filter element: Reusable cotton gauze — no replacement costs Bolt-on fitment: Designed to work with standard engine bay configurations up to 1600cc Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST Recommended For: Petrol and diesel engines up to 1600cc Hatchbacks, sedans, and compact SUVs looking for a meaningful intake upgrade For engines above 1600cc, see the ADDIA85-150 kit. For a full cold air intake system with carbon dynamic airbox (CDA), see the ACCDA series.

Read more less

More displacement. More demand for air. More reason to upgrade. The BMC D.I.A (Direct Induction Airbox) Induction Kit — ADDIA85-150 is a bolt-on cold air intake system engineered for engines above 1600cc. The D.I.A kit routes intake air from outside the hot engine bay through a sealed airbox housing BMC's washable cotton gauze filter — delivering a denser, cooler charge to the engine compared to the standard intake. The larger 85mm inlet diameter and extended 150mm filter make it suited to the higher airflow demands of larger displacement engines. Key benefits: Cooler, denser intake charge: Sealed airbox isolates the filter from hot engine bay air — cooler air means higher oxygen density and more combustion efficiency Higher airflow capacity: 85mm inlet diameter handles the volume demands of engines above 1600cc Washable BMC filter element: Reusable oiled cotton gauze — lifetime use with periodic cleaning Performance intake routing: Repositions the intake for optimal cold air access in the engine bay Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST Recommended For: Petrol and diesel engines above 1600cc Sedans, SUVs, and performance cars seeking a meaningful intake upgrade For engines up to 1600cc, see ADDIA70-130. For a full carbon dynamic airbox (CDA) system, see the ACCDA series.

Read more less

Performance Air Filter for Toyota Innova Hycross & Hybrid Platforms The BMC FB01011/01 is engineered for Toyota’s next-generation hybrid and petrol engines—where efficiency, refinement, and airflow precision matter more than ever. Designed as a direct OEM replacement panel filter, it enhances intake airflow while maintaining high filtration efficiency—capturing particles as small as 7 microns. Built using multi-layered oiled cotton gauze, this filter improves engine breathing, ensuring smoother acceleration and long-term efficiency—especially critical in hybrid systems where airflow consistency supports optimal engine-electric balance. Compatible Toyota Vehicles (India Priority Focus) Toyota Innova Hycross  Innova Hycross 2.0 Petrol (2022+) Innova Hycross 2.0 Strong Hybrid (2022+) Extended Toyota Compatibility (Global + Premium Segment) Toyota Camry 2.5 Hybrid (2017+) Toyota Corolla (E210) 1.8 / 2.0 (2019+) Toyota Corolla Cross 1.8 / Hybrid (2020+) Toyota RAV4 2.5 Hybrid (2018+) Toyota C-HR 1.2 Turbo / 2.0 (2016–2023) Toyota Avalon 2.5 / Hybrid (2018+) Toyota Crown Hybrid (2023+) Toyota Highlander Hybrid (2019+) Additional Compatibility  Lexus ES 300h (2018+) Jeep Renegade 1.0 Turbo (2018–2022) Fiat 500X 1.0 (2018+) Subaru BRZ 2.4 (2022+) Why This Filter Stands Out Designed for hybrid engine airflow optimization Supports premium Toyota platforms Washable & reusable—ideal for long ownership cycles Improves airflow consistency and intake efficiency Direct OEM fit—no modification required

Read more less

High-Performance Air Filter for Baleno, Glanza & K-Series 1.2 Engines Built for India’s most driven petrol platform, the BMC FB01019/01 is a direct performance upgrade for Maruti Suzuki and Toyota’s 1.2L K12N engine lineup. This isn’t just a replacement—it’s an airflow optimization layer engineered to unlock smoother throttle response and long-term engine efficiency. Constructed using multi-layered oiled cotton gauze, this filter increases airflow while filtering particles as small as 7 microns—outperforming conventional paper filters. Drop it in. Feel the difference where it matters—pickup, breathing, and consistency. Compatible Cars (India Focused) This filter is fully compatible with: Maruti Baleno 1.2 (2019 onwards) Toyota Glanza 1.2 (2019 onwards) Maruti Swift 1.2 (2020 onwards) Maruti Swift 2022 Facelift 1.2 Maruti WagonR 1.2 (2022 onwards) These vehicles share the K12N DualJet petrol engine, making this a perfect OEM-fit upgrade. Full Compatibility (As per BMC Official Data) Maruti Suzuki: Baleno II 1.2 (2019 >) Swift Dzire III 1.2 (2020 >) Swift III 1.2 (2022 >) Swift III 1.2 (2021 >) Wagon R III 1.2 (2022 >) Suzuki (Global): Baleno II 1.2 (2016–2019) Toyota (India Equivalent): Glanza 1.2 (Rebadged Baleno platform) Why This Filter Wins Reusable Performance – Wash, re-oil, reuse. No recurring replacements Better Airflow – Freer breathing engine = improved drivability OEM Fitment – No tuning, no modification Cost Efficiency – One-time investment vs repeated paper filter costs Built to Last – Full mould design eliminates weak joints

Read more less

The Toyota Glanza — rebadged Baleno, same engine, same BMC filter. The BMC FB01019/01 covers the Toyota Glanza alongside the Maruti Suzuki Baleno BS6 and Swift BS6 — all sharing the same 1.2 petrol K12N engine platform. Already listed under the Baleno BS6/Swift BS6 product, this listing ensures Toyota Glanza owners find the right filter when searching by model name. Compatible Cars: Toyota Glanza – 1.2 Petrol Maruti Suzuki Baleno BS6 (2021 onwards) – 1.2 Petrol Maruti Suzuki Swift BS6 (2021 onwards) – 1.2 Petrol Why BMC FB01019/01: Improved airflow: Cotton gauze outflows OEM paper — better throttle response on the K12N petrol Lifetime filter: Washable and re-oilable — permanently replaces OEM filter costs Drop-in fit: Exact match for the Glanza / Baleno BS6 / Swift BS6 airbox Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST

Read more less

The Maruti Swift and Dzire BS6 — India's best-selling cars. Now with a lifetime filter upgrade. The BMC FB01020 is a direct-fit washable performance air filter for the Maruti Suzuki Swift and Dzire with the 1.3 diesel engine (2018 onwards BS6). BMC's oiled cotton gauze construction outflows the restrictive OEM paper element, improving throttle response and engine efficiency on the DDiS 1.3 diesel. Compatible Cars: Maruti Suzuki Swift 1.3 Diesel (2018 onwards) Maruti Suzuki Dzire 1.3 Diesel (2018 onwards) Why BMC FB01020: Better airflow: Cotton gauze outflows OEM paper — improved throttle response on the DDiS diesel Lifetime filter: Washable and re-oilable — no more annual OEM replacements Drop-in fit: Exact match for the Swift/Dzire 1.3D airbox Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST For the Swift/Dzire BS6 1.2 petrol, see the FB01019/01 listing.

Read more less

BMC FB01023 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01023 is a direct-fit washable performance air filter that fits the Audi Q8 4M / RS Q8 (2019+), Bentley Bentayga (2018+), Lamborghini Urus (2018+) and Porsche Cayenne III 9YA (2018+). Engine fitments: 3.0 TFSI / 4.0 V8, 3.0 V6 / 4.0 V8, 4.0 V8.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01025 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01025 is a direct-fit washable performance air filter that fits the Mercedes-Benz A-Class A200 W177 (2018+) and Mercedes-Benz GLA 200 (2020+). Engine fitments: 1.4.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

The Taigun and Virtus — Volkswagen's India-built performance platforms. Filter them right. The BMC FB01027 is a direct-fit washable performance air filter for the Volkswagen Taigun (1.5 TSI), T-Roc (1.5 TSI), and Skoda Kushaq (1.5 TSI) and Slavia (1.5 TSI) — all sharing the same EA211 Evo 1.5 TSI engine platform. BMC's cotton gauze construction delivers improved airflow over the stock paper element, enhancing the 1.5 TSI's turbo response and overall throttle feel. Compatible Cars: Volkswagen Taigun 1.5 TSI (2021 onwards) Volkswagen T-Roc 1.5 TSI (2021 onwards) Volkswagen Virtus 1.5 TSI Skoda Kushaq 1.5 TSI (2021 onwards) Skoda Slavia 1.5 TSI Why BMC FB01027: Improved airflow: Cotton gauze outflows OEM paper — better turbo spool and throttle response on the 1.5 TSI Lifetime filter: Washable and re-oilable — no replacement costs Exact fit: Drop-in for the MQB A0 IN platform airbox Genuine BMC: Authorised stock from BMC Airfilters India Pvt Ltd MRP inclusive of 18% GST For the 1.0 TSI Taigun/Virtus/Kushaq/Slavia, see the FB941/20 listing.

Read more less

BMC FB01028 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01028 is a direct-fit washable performance air filter that fits the Mercedes-Benz C-Class C200 W205/C205 (2018+) and Mercedes-Benz E-Class E200 W213/S213 (2018+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01030 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01030 is a direct-fit washable performance air filter that fits the Volvo XC40 D4 (2017+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01033 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01033 is a direct-fit washable performance air filter that fits the Mercedes-Benz A-Class A200d W177 (2018+). Engine fitments: 2.0.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less

BMC FB01034 Performance Air FilterOne genuine BMC filter, multiple premium applications. The BMC FB01034 is a direct-fit washable performance air filter that fits the BMW M5 Competition G30/G31/F90 (2018+) M8 (2019+). Engine fitments: 4.4.This is a direct replacement for the factory paper element — it fits the original airbox with no modification. BMC's multi-layer cotton-gauze media flows more air than a disposable stock filter while maintaining proper filtration.Why BMC Washable and reusable — clean, re-oil and refit. One filter for the life of the car. Made in Italy by BMC, an OEM and motorsport air filter manufacturer. Genuine BMC, supplied by Rawtorque as an authorised stockist. Note: some applications require two filters per car — please confirm quantity for your exact variant before ordering.

Read more less