Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
A/C System Cleaner clears the musty smell that builds up in a car's air-conditioning over an Indian summer. The aerosol cleans and disinfects the evaporator and ducting, killing the bacteria, fungi and mould that cause odours, with no need to dismantle the system.
What it does
Cleans and disinfects the evaporator and air ducts
Removes bacteria, fungi and mould that cause bad smells
Refreshes cabin air without opening up the AC system
How to use
Run the AC, place the can in the footwell as directed and let it discharge through the system. Works on cars, SUVs and commercial vehicles.
Specifications
Article number: 4087
Content: 250 ml
Use on: vehicle air-conditioning systems
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
ATF Additive is a care product for automatic transmissions. Added to the ATF, it conditions seals to prevent oil loss, dampens harsh shifting and helps extend the working life of the gearbox, a smart top-up on higher-mileage automatics.
What it does
Conditions seals to help prevent transmission oil loss
Smooths and dampens shifting
Supports a longer transmission service life
How to use
Add to the automatic transmission fluid. One 250 ml bottle treats a standard ATF fill. Compatible with conventional and synthetic ATFs.
Specifications
Article number: 5135
Content: 250 ml
Use in: automatic transmissions
Fitment guidance
For automatic transmissions. If unsure whether an additive suits your gearbox, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Catalytic System Clean is a petrol fuel-system additive that cleans the combustion chamber, valves, spark plugs and the catalytic converter in one tank. It is the go-to product for restoring smooth running, lowering emissions and clearing a converter that has started to clog, often saving an expensive part replacement.
What it does
Cleans the entire intake, combustion and exhaust path through to the catalytic converter
Reduces emissions and can help pass a pollution / PUC check
Smooths idle and throttle response on engines with deposit build-up
How to use
Add the full bottle to the fuel tank. One 300 ml can treats up to 70 litres of petrol. Safe for use with catalytic converters.
Specifications
Article number: 7110
Content: 300 ml
Treatment: up to 70 L of petrol
Use in: petrol engines with or without a catalytic converter
Fitment guidance
For petrol engines only. Not for diesel vehicles. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Central Hydraulic System Oil is a synthetic central hydraulic fluid (CHF) for power steering, level control and hydropneumatic suspension systems. The free-flowing green fluid stays stable from deep cold to high heat and protects the system against wear and corrosion, the correct fill for many European vehicles that specify a CHF.
What it does
Reliable operation of power steering, level control and suspension hydraulics
Excellent cold-flow and high-temperature stability
Strong wear and corrosion protection for pumps and valves
Specifications
Article number: 1127
Content: 1 L
Type: synthetic central hydraulic fluid (green)
Fitment guidance
Use only where a green central hydraulic fluid (CHF) is specified by the vehicle maker. Confirm the exact fluid your system requires before topping up, the full current specification is printed on the pack. Tell us your car and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Cera Tec is Liqui Moly's flagship friction and wear protection additive, built around a suspension of ceramic boron-nitride particles that bond to metal surfaces inside the engine. The result is a smoother, quieter, better-protected drivetrain that holds up under high load and high temperature.
One 300 ml bottle treats up to 5 litres of engine oil and stays effective for roughly 50,000 km, so a single dose covers most owners for a year or more of driving.
What it does
Lays down a ceramic protective layer that reduces metal-to-metal friction and wear
Resists extreme pressure and temperature, including momentary lubrication-loss conditions
Lowers running friction, which can improve smoothness and fuel efficiency
Chemically stable and miscible with all commercial mineral and synthetic motor oils
How to use
Add the full bottle to warm engine oil. One 300 ml bottle is dosed for up to 5 litres of oil. Best added at an oil change. Effective for approximately 50,000 km.
Specifications
Article number: 3721
Content: 300 ml
Treatment: up to 5 L of engine oil, effective ~50,000 km
Use in: 4-stroke petrol and diesel engines
Fitment guidance
Suited to cars and other 4-stroke petrol or diesel engines. Not intended for motorcycles with an oil-bath wet clutch. If you are unsure whether Cera Tec suits your vehicle, reach out and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Coolant Ready Mix RAF 12+ is a ready-to-use engine coolant, no dilution needed. Built on OAT technology, it protects the cooling system against overheating, freezing and corrosion, and suits modern petrol and diesel engines with aluminium cooling systems.
What it does
Protects against overheating, freezing and corrosion
OAT technology, suitable for aluminium cooling systems
Ready to use straight from the bottle, no mixing required
Specifications
Article number: 6924
Type: ready-mix OAT coolant / antifreeze
Suitable for: systems requiring a G12+ class coolant
Fitment guidance
Use only a coolant that matches your vehicle's required specification and colour, mixing incompatible coolants can cause problems. Confirm the correct coolant before topping up, the full current specification is printed on the pack. Tell us your car and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
DEF Anti-Crystal Additive Concentrate protects the SCR system on modern diesels that run AdBlue (DEF). It prevents the crystal formation that clogs DEF injectors, pumps and lines, keeping the emission system working reliably and helping avoid costly SCR repairs.
What it does
Prevents crystal formation in AdBlue / DEF systems
Protects DEF injectors, pumps and lines from clogging
Supports reliable SCR emission-system operation
How to use
Add to the DEF / AdBlue tank as directed on the pack.
Specifications
Article number: 21799
Type: DEF / AdBlue anti-crystallisation concentrate
Use in: diesel vehicles with SCR / AdBlue
Fitment guidance
For diesel vehicles fitted with an SCR / AdBlue system only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Diesel Engine System Cleaner is a thorough one-tank clean for the diesel fuel system. It removes carbon build-up from injectors and the combustion chamber, restores fuel atomisation and reduces emissions, while remaining safe for catalytic converters and diesel particulate filters.
What it does
Cleans injectors and key diesel fuel-system components
Restores atomisation and reduces emissions
Safe for catalytic converters and DPFs
How to use
Add the full bottle to the diesel tank. One 300 ml can treats a standard tank.
Specifications
Article number: 21623
Content: 300 ml
Use in: diesel engines
Fitment guidance
For diesel engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Diesel Particulate Filter Protector helps keep the DPF healthy on modern diesels. Added to the tank, it lowers the temperature at which soot burns off, so the filter regenerates more easily, a real benefit for cars used mostly on short, stop-start city runs where the DPF rarely gets hot enough to clean itself.
What it does
Supports and eases diesel particulate filter regeneration
Reduces soot build-up and helps prevent DPF clogging
Especially useful for short-distance, city driving
How to use
Add to the diesel tank as directed. One 250 ml bottle treats a standard tank.
Specifications
Article number: 2146
Content: 250 ml
Use in: diesel engines with a DPF
Fitment guidance
For diesel engines fitted with a diesel particulate filter. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Diesel Purge is a deep-cleaning treatment for the diesel fuel system, a favourite among diesel-SUV and commercial owners. It dissolves deposits on injection nozzles and in the combustion chamber, restoring a smooth, even idle and clean combustion. Compatible with conventional diesel and biodiesel.
What it does
Removes deposits from injection nozzles and the combustion chamber
Restores smooth idle, response and clean combustion
Protects the injection system against wear and corrosion
How to use
Use as directed, either dosed into the diesel tank or run directly through the injection system by a workshop. Suitable for conventional diesel and biodiesel.
Specifications
Article number: 1811
Content: 500 ml
Use in: diesel engines
Fitment guidance
For diesel engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Diesel Smoke Stop reduces the black smoke that older or harder-worked diesels produce under load. It improves combustion so more of the fuel burns cleanly, cutting visible smoke and helping the engine run more efficiently, handy ahead of a pollution check.
What it does
Reduces black exhaust smoke from diesel engines
Improves combustion for more complete fuel burn
Supports cleaner running and lower emissions
How to use
Add to the diesel tank as directed. One 150 ml bottle treats a standard tank.
Specifications
Article number: 1808
Content: 150 ml
Use in: diesel engines
Fitment guidance
For diesel engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Engine Flush Plus is a pre-oil-change cleaner that dissolves sludge, varnish and combustion deposits while the old oil is still in the engine, so the muck drains out with it. Run it before every oil change to start the new oil on a genuinely clean engine.
What it does
Dissolves oil sludge and deposits and holds them in suspension for draining
Helps free sticking piston rings and hydraulic valve lifters
Restores clean oilways so fresh oil circulates and protects properly
How to use
Add to the warm engine oil before draining. Let the engine idle for 10 to 15 minutes, do not rev or drive, then drain the oil and change the filter. One 300 ml can treats up to 5 litres of engine oil.
Specifications
Article number: 2657
Content: 300 ml
Treatment: up to 5 L of engine oil
Use in: 4-stroke petrol and diesel engines
Fitment guidance
Suitable for petrol and diesel car engines. If unsure whether to use a flush on a high-mileage engine, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Engine Oil Treatment is a wear-protection additive that forms a tough lubricating layer on engine components, reducing friction and quietening the engine. A simple, low-cost way to add a margin of protection at an oil change, suitable for both petrol and diesel motors.
What it does
Forms a protective film that reduces friction and wear
Helps quieten engine running and smooth out operation
Miscible with all commercial mineral and synthetic motor oils
How to use
Add to the engine oil, ideally at an oil change. One bottle treats the standard car oil fill.
Specifications
Article number: 2587
Content: 300 ml
Use in: 4-stroke petrol and diesel engines
Fitment guidance
Intended for car petrol and diesel engines. Not recommended for motorcycles with an oil-bath wet clutch. If unsure, reach out and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Gasoline Engine System Cleaner is a thorough one-tank cleaner for the whole petrol fuel system. It clears deposits from injectors, intake valves and the combustion chamber, restoring smooth running, response and economy, and works on modern turbocharged and direct-injection engines.
What it does
Removes deposits from injectors, intake valves and combustion chamber
Restores throttle response, smooth idle and fuel economy
Suitable for turbocharged and direct-injection petrol engines
How to use
Add the full bottle to the petrol tank. One 300 ml can treats a standard tank. Safe for catalytic converters.
Specifications
Article number: 21492
Content: 300 ml
Use in: petrol engines
Fitment guidance
For petrol engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Gear Oil Additive carries molybdenum disulfide into manual gearbox oil, where it lays down a low-friction film on the gears. The result is smoother, easier shifting, less wear and quieter running, a simple upgrade at a gear-oil change.
What it does
Reduces friction and wear on manual transmission gears
Smooths gear engagement and shift feel
Helps cut gearbox noise and vibration
How to use
Add to the manual gearbox oil. One tube treats a standard gearbox fill. Best added at a gear-oil change.
Specifications
Article number: 1040
Content: 20 g
Use in: manual transmissions
Fitment guidance
For manual gearboxes. Not for use in transmissions where the maker prohibits friction modifiers, such as some synchromesh or limited-slip units. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Injection Cleaner clears carbon and deposits from petrol injectors and improves fuel atomisation. It is the simple fix for the symptoms of a dirty fuel system, hard starting, misfire, rough idle and hesitation, added straight to the tank.
What it does
Removes deposits from petrol injectors and the fuel system
Improves fuel atomisation and combustion
Smooths idle and addresses hard starting and misfire
How to use
Add to the petrol tank. One 300 ml bottle treats up to 80 litres of fuel. Safe for catalytic converters.
Specifications
Article number: 2522
Content: 300 ml
Treatment: up to 80 L of petrol
Use in: petrol engines
Fitment guidance
For petrol engines only. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Klima Refresh is a quick, fully automatic air-conditioning refresh. One small can discharges through the cabin and AC system to clean and neutralise the source of stale, musty smells, leaving the interior fresh in minutes.
What it does
Cleans and disinfects the AC system and cabin air path
Eliminates odours caused by bacteria and mould
Fast, automatic application with no dismantling
How to use
Set the AC to recirculate with the blower running, place the can inside the cabin, trigger it and leave the car closed as directed.
Specifications
Article number: 21465
Content: 75 ml
Use on: vehicle air-conditioning systems
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen 5W-30 carries Liqui Moly's Molygen anti-friction technology in a fuel-economy 5W-30 grade. It keeps modern petrol and diesel engines clean and well protected while reducing internal friction for smoother running.
What it does
Molygen friction-modifier network reduces wear and supports fuel efficiency
Outstanding engine cleanliness over the service interval
Reliable cold-start flow and stable high-temperature protection
Specifications
Article number: 9047
Viscosity: SAE 5W-30
Content: 1 L
Meets / suitable for: API SN; ACEA A3/B4
Fitment guidance
For petrol and diesel engines specifying a 5W-30 of this performance level. Always confirm the exact grade and approval your engine requires before use. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen 5W-30 in the 4-litre service pack, sized for a full oil change. It carries Liqui Moly's Molygen anti-friction technology in a fuel-economy 5W-30 grade, keeping modern petrol and diesel engines clean and well protected while reducing internal friction.
What it does
Molygen friction-modifier network reduces wear and supports fuel efficiency
Outstanding engine cleanliness over the service interval
Reliable cold-start flow and stable high-temperature protection
Specifications
Article number: 9089
Viscosity: SAE 5W-30
Content: 4 L
Meets / suitable for: API SN; ACEA A3/B4
Fitment guidance
For petrol and diesel engines specifying a 5W-30 of this performance level. Always confirm the exact grade and approval your engine requires. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen Motor Protect is a long-life engine oil additive built on Liqui Moly's Molygen anti-friction technology. Added to the oil, it forms a durable protective film on engine components that reduces friction and wear for the full oil-change interval, a premium upgrade for owners who want maximum protection.
What it does
Forms a long-lasting Molygen anti-friction film on engine parts
Reduces friction and wear and supports fuel efficiency
Protects for the whole oil-change interval, for petrol and diesel
How to use
Add to the engine oil at an oil change. One 500 ml bottle treats a standard car oil fill. Miscible with all commercial motor oils.
Specifications
Article number: 1015
Content: 500 ml
Use in: 4-stroke petrol and diesel engines
Fitment guidance
For car petrol and diesel engines. Not for motorcycles with an oil-bath wet clutch. If unsure, reach out and we will help with guidance.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen New Generation 0W-20 is a low-viscosity, fuel-economy engine oil for the latest petrol and hybrid engines, in the 4-litre service pack. The 0W-20 grade flows freely on cold start and reduces internal drag, while the Molygen anti-friction additive adds an extra layer of wear protection. A natural fit for new Toyota, Maruti Suzuki and Honda petrol and hybrid models that specify a 0W-20.
What it does
Low-friction 0W-20 grade for maximum fuel efficiency
Molygen additive network reduces wear and keeps the engine clean
Instant cold-start protection
Specifications
Article number: 21357
Viscosity: SAE 0W-20
Content: 4 L
Meets / suitable for: API SP; ILSAC GF-6A
Fitment guidance
Use only where a 0W-20 is specified, fitting a lower grade where a thicker oil is required can harm the engine. Always check your owner's manual. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen New Generation 5W-40 pairs a modern synthetic-technology base oil with Liqui Moly's Molygen anti-friction additive, giving it the distinctive green tint and a wear-protection edge. A strong all-round choice for petrol and diesel cars that call for a 5W-40.
What it does
Molygen friction-modifier network reduces wear and helps lower fuel consumption
Keeps engines exceptionally clean and protects over long oil-change intervals
Stable protection across high and low operating temperatures
Specifications
Article number: 8576
Viscosity: SAE 5W-40
Content: 1 L
Meets / suitable for: API SN; ACEA A3/B4; VW 502 00 / 505 00; MB-Approval 229.3; Renault RN 0700 / 0710
Fitment guidance
For petrol and diesel engines specifying a 5W-40 to the approvals above. Always confirm the grade your engine requires in the owner's manual. Share your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
Molygen New Generation 5W-40 in the 4-litre service pack, sized for a full oil change. It pairs a modern synthetic-technology base oil with Liqui Moly's Molygen anti-friction additive, the distinctive green oil that keeps petrol and diesel engines clean while reducing wear.
What it does
Molygen friction-modifier network reduces wear and helps lower fuel consumption
Keeps engines exceptionally clean over long oil-change intervals
Stable protection across high and low operating temperatures
Specifications
Article number: 8578
Viscosity: SAE 5W-40
Content: 4 L
Meets / suitable for: API SN; ACEA A3/B4; VW 502 00 / 505 00; MB-Approval 229.3; Renault RN 0700 / 0710
Fitment guidance
For petrol and diesel engines specifying a 5W-40 to the approvals above. Always confirm the grade your engine requires. Tell us your car and we will help with fitment guidance. The full current specification is printed on the pack.
Genuine Liqui Moly, made in Germany.
Fast dispatch
Delivery timelines may vary slightly by region. Orders placed after the dispatch cut-off are shipped next working day.
The original Liqui Moly MoS2 Oil Additive carries solid molybdenum disulfide into the oil circuit, where it bonds to wear surfaces and lays down a tough, low-friction film. A long-running favourite for owners who want quieter, smoother engines and added protection in older or hard-worked motors.
What it does
Builds a MoS2 sliding film that reduces friction and wear
Provides emergency-running protection if oil supply is briefly interrupted
Miscible with all commercial mineral and synthetic motor oils
How to use
Add to the engine oil. One 200 ml bottle treats roughly 5 litres of oil. Best added at an oil change.
Specifications
Article number: 7178
Content: 200 ml
Use in: 4-stroke petrol and diesel engines
Fitment guidance
Intended for car and 4-stroke petrol or diesel engines. Not recommended for motorcycles with an oil-bath wet clutch. If unsure, reach out and we will help with fitment guidance.
Genuine Liqui Moly, made in Germany.
0% interest · 3 months · orders above ₹10,000
No Cost EMI
